Search Results

Search found 2922 results on 117 pages for 'raw noob'.

Page 89/117 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

  • Allocating Entities within an Entity System

    - by miguel.martin
    I'm quite unsure how I should allocate/resemble my entities within my entity system. I have various options, but most of them seem to have cons associated with them. In all cases entities are resembled by an ID (integer), and possibly has a wrapper class associated with it. This wrapper class has methods to add/remove components to/from the entity. Before I mention the options, here is the basic structure of my entity system: Entity An object that describes an object within the game Component Used to store data for the entity System Contains entities with specific components Used to update entities with specific components World Contains entities and systems for the entity system Can create/destroy entites and have systems added/removed from/to it Here are my options, that I have thought of: Option 1: Do not store the Entity wrapper classes, and just store the next ID/deleted IDs. In other words, entities will be returned by value, like so: Entity entity = world.createEntity(); This is much like entityx, except I see some flaws in this design. Cons There can be duplicate entity wrapper classes (as the copy-ctor has to be implemented, and systems need to contain entities) If an Entity is destroyed, the duplicate entity wrapper classes will not have an updated value Option 2: Store the entity wrapper classes within an object pool. i.e. Entities will be return by pointer/reference, like so: Entity& e = world.createEntity(); Cons If there is duplicate entities, then when an entity is destroyed, the same entity object may be re-used to allocate another entity. Option 3: Use raw IDs, and forget about the wrapper entity classes. The downfall to this, I think, is the syntax that will be required for it. I'm thinking about doing thisas it seems the most simple & easy to implement it. I'm quite unsure about it, because of the syntax. i.e. To add a component with this design, it would look like: Entity e = world.createEntity(); world.addComponent<Position>(e, 0, 3); As apposed to this: Entity e = world.createEntity(); e.addComponent<Position>(0, 3); Cons Syntax Duplicate IDs

    Read the article

  • Is there an appropriate coding style for implementing an algorithm during an interview?

    - by GlenPeterson
    I failed an interview question in C years ago about converting hex to decimal by not exploiting the ASCII table if (inputDigitByte > 9) hex = inputDigitByte - 'a'. The rise of Unicode has made this question pretty silly, but the point was that the interviewer valued raw execution speed above readability and error handling. They tell you to review algorithms textbooks to prepare for these interviews, yet these same textbooks tend to favor the implementation with the fewest lines of code, even if it has to rely on magic numbers (like "infinity") and a slower, more memory-intensive implementation (like a linked list instead of an array) to do that. I don't know what is right. Coding an algorithm within the space of an interview has at least 3 constraints: time to code, elegance/readability, and efficiency of execution. What trade-offs are appropriate for interview code? How much do you follow the textbook definition of an algorithm? Is it better to eliminate recursion, unroll loops, and use arrays for efficiency? Or is it better to use recursion and special values like "infinity" or Integer.MAX_VALUE to reduce the number of lines of code needed to write the algorithm? Interface: Make a very self-contained, bullet-proof interface, or sloppy and fast? On the one extreme, the array to be sorted might be a public static variable. On the other extreme, it might need to be passed to each method, allowing methods to be called individually from different threads for different purposes. Is it appropriate to use a linked-list data structure for items that are traversed in one direction vs. using arrays and doubling the size when the array is full? Implementing a singly-linked list during the interview is often much faster to code and easier remember for recursive algorithms like MergeSort. Thread safety - just document that it's unsafe, or say so verbally? How much should the interviewee be looking for opportunities for parallel processing? Is bit shifting appropriate? x / 2 or x >> 1 Polymorphism, type safety, and generics? Comments? Variable and method names: qs(a, p, q, r) vs: quickSort(theArray, minIdx, partIdx, maxIdx) How much should you use existing APIs? Obviously you can't use a java.util.HashMap to implement a hash-table, but what about using a java.util.List to accumulate your sorted results? Are there any guiding principals that would answer these and other questions, or is the guiding principal to ask the interviewer? Or maybe this should be the basis of a discussion while writing the code? If an interviewer can't or won't answer one of these questions, are there any tips for coaxing the information out of them?

    Read the article

  • Desktop Fun: Runic Style Fonts

    - by Asian Angel
    Most of the time regular fonts are just what you need for documents, invitations, or adding text to images. But what if you are in the mood for something unusual or unique to add that perfect touch? If you like older runic style writing, then enjoy finding some new favorites for your collection with our Runic Style Fonts collection. Temple photo by ShinyShiny. Note: To manage the fonts on your Windows 7, Vista, & XP systems see our article here. The Runic Style Fonts Sable Download Worn Manuscript Download JSL Ancient Download Antropos Download Cave Gyrl Download The Roman Runes Alliance Download Ancient Geek Download Troll Download Runish Quill MK *includes two font types Download DS RUNEnglish 2 Download Runes Written *includes two font types Download Wolves And Ravens Download Art Greco Download Dalek Download Glagolitic AOE Download Linear B Download Cartouche Download Greywolf Glyphs *includes 62 individual characters Note: This group represents A – Z in all capital letters. Note: This group represents A – Z in all lower case letters. Note: This group represents the numbers 0 – 9. Download Africain *includes 62 individual characters Note: This group represents A – Z in all capital letters. Note: This group represents A – Z in all lower case letters. Note: This group represents the numbers 0 – 9. Download Cave Writings *includes 52 individual characters Note: This group represents A – Z in all capital letters. Note: This group represents A – Z in all lower case letters. Download For more great ways to customize your computer be certain to look through our Desktop Fun section. Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Five Sleek Audi R8 Car Themes for Chrome and Iron MS Notepad Replacement Metapad Returns with a New Beta Version Spybot Search and Destroy Now Available as a Portable App (PortableApps.com) ShapeShifter: What Are Dreams? [Video] This Computer Runs on Geek Power Wallpaper Bones, Clocks, and Counters; A Look at the First 35,000 Years of Computing

    Read the article

  • Virtual Lab part 2&ndash;Templates, Patterns, Baselines

    - by Geoff N. Hiten
    Once you have a good virtualization platform chosen, whether it is a desktop, server or laptop environment, the temptation is to build “X”.  “X” may be a SharePoint lab, a Virtual Cluster, an AD test environment or some other cool project that you really need RIGHT NOW.  That would be doing it wrong. My grandfather taught woodworking and cabinetmaking for twenty-seven years at a trade school in Alabama.  He was the first instructor hired at that school and the only teacher for the first two years.  His students built tables, chairs, and workbenches so the school could start its HVAC courses.   Visiting as a child, I also noticed many extra “helper” stands, benches, holders, and gadgets all built from wood.  What does that have to do with a virtual lab, you ask?  Well, that is the same approach you should take.  Build stuff that you will use.  Not for solving a particular problem, but to let the Virtual Lab be part of your normal troubleshooting toolkit. Start with basic copies of various Operating Systems.  Load and patch server and desktop OS environments.  This also helps build your collection of ISO files, another essential element of a virtual Lab.  Once you have these “baseline” images, you can use your Virtualization software’s snapshot capability to freeze the image.  Clone the snapshot and you have a brand new fully patched machine in mere moments.  You may have to sysprep some of the Microsoft OS environments if you are going to create a domain environment or experiment with clustering.  That is still much faster than loading and patching from scratch. So once you have a stock of raw materials (baseline images in this case) where should you start.  Again, my grandfather’s workshop gives us the answer.  In the shop it was workbenches and tables to hold large workpieces that made the equipment more useful.  In a Windows environment the same role falls to the fundamental network services:  DHCP, DNS, Active Directory, Routing, File Services, and Storage services.  Plan your internal network setup.  Build out an AD controller with all the features listed.  Make the actual domain an isolated domain so it will not care about where you take it.  Add the Microsoft iSCSI target.  Once you have this single system, you can leverage it for almost any network environment beyond a simple stand-alone system. Having these templates and fundamental infrastructure elements ready to run means I can build a quick lab in minutes instead of hours.  My solutions are well-tested, my processes fully documented with screenshots, and my plans validated well before I have to make any changes to client systems.  the work I put in is easily returned in increased value and client satisfaction.

    Read the article

  • How to get tens of millions of pages indexed by Google bot?

    - by Chris Adragna
    We are currently developing a site that currently has 8 million unique pages that will grow to about 20 million right away, and eventually to about 50 million or more. Before you criticize... Yes, it provides unique, useful content. We continually process raw data from public records and by doing some data scrubbing, entity rollups, and relationship mapping, we've been able to generate quality content, developing a site that's quite useful and also unique, in part due to the breadth of the data. It's PR is 0 (new domain, no links), and we're getting spidered at a rate of about 500 pages per day, putting us at about 30,000 pages indexed thus far. At this rate, it would take over 400 years to index all of our data. I have two questions: Is the rate of the indexing directly correlated to PR, and by that I mean is it correlated enough that by purchasing an old domain with good PR will get us to a workable indexing rate (in the neighborhood of 100,000 pages per day). Are there any SEO consultants who specialize in aiding the indexing process itself. We're otherwise doing very well with SEO, on-page especially, besides, the competition for our "long-tail" keyword phrases is pretty low, so our success hinges mostly on the number of pages indexed. Our main competitor has achieved approx 20MM pages indexed in just over one year's time, along with an Alexa 2000-ish ranking. Noteworthy qualities we have in place: page download speed is pretty good (250-500 ms) no errors (no 404 or 500 errors when getting spidered) we use Google webmaster tools and login daily friendly URLs in place I'm afraid to submit sitemaps. Some SEO community postings suggest a new site with millions of pages and no PR is suspicious. There is a Google video of Matt Cutts speaking of a staged on-boarding of large sites, too, in order to avoid increased scrutiny (at approx 2:30 in the video). Clickable site links deliver all pages, no more than four pages deep and typically no more than 250(-ish) internal links on a page. Anchor text for internal links is logical and adds relevance hierarchically to the data on the detail pages. We had previously set the crawl rate to the highest on webmaster tools (only about a page every two seconds, max). I recently turned it back to "let Google decide" which is what is advised.

    Read the article

  • Dealing with coworkers when developing, need advice [closed]

    - by Yippie-Kai-Yay
    I developed our current project architecture and started developing it on my own (reaching something like, revision 40). We're developing a simple subway routing framework and my design seemed to be done extremely well - several main models, corresponding views, main logic and data structures were modeled "as they should be" and fully separated from rendering, algorithmic part was also implemented apart from the main models and had a minor number of intersection points. I would call that design scalable, customizable, easy-to-implement, interacting mostly based on the "black box interaction" and, well, very nice. Now, what was done: I started some implementations of the corresponding interfaces, ported some convenient libraries and wrote implementation stubs for some application parts. I had the document describing coding style and examples of that coding style usage (my own written code). I forced the usage of more or less modern C++ development techniques, including no-delete code (wrapped via smart pointers) and etc. I documented the purpose of concrete interface implementations and how they should be used. Unit tests (mostly, integration tests, because there wasn't a lot of "actual" code) and a set of mocks for all the core abstractions. I was absent for 12 days. What do we have now (the project was developed by 4 other members of the team): 3 different coding styles all over the project (I guess, two of them agreed to use the same style :), same applies to the naming of our abstractions (e.g CommonPathData.h, SubwaySchemeStructures.h), which are basically headers declaring some data structures. Absolute lack of documentation for the recently implemented parts. What I could recently call a single-purpose-abstraction now handles at least 2 different types of events, has tight coupling with other parts and so on. Half of the used interfaces now contain member variables (sic!). Raw pointer usage almost everywhere. Unit tests disabled, because "(Rev.57) They are unnecessary for this project". ... (that's probably not everything). Commit history shows that my design was interpreted as an overkill and people started combining it with personal bicycles and reimplemented wheels and then had problems integrating code chunks. Now - the project still does only a small amount of what it has to do, we have severe integration problems, I assume some memory leaks. Is there anything possible to do in this case? I do realize that all my efforts didn't have any benefit, but the deadline is pretty soon and we have to do something. Did someone have a similar situation? Basically I thought that a good (well, I did everything that I could) start for the project would probably lead to something nice, however, I understand that I'm wrong. Any advice would be appreciated, sorry for my bad english.

    Read the article

  • Workflow 4.5 is Awesome, cant wait for 5.0!

    - by JoshReuben
    About 2 years ago I wrote a blog post describing what I would like to see in Workflow vnext: http://geekswithblogs.net/JoshReuben/archive/2010/08/25/workflow-4.0---not-there-yet.aspx At the time WF 4.0 was a little rough around the edges – the State Machine was on codeplex and people were simulating state machines with Flowcharts. Last year I built a near- realtime machine management system using WF 4.0.1 – its managing the internal operations of this device: http://landanano.com/products/commercial   Well WF 4.5 has come a long way – many of my gripes have been addressed: C# expressions - no more VB 'AndAlso' clauses state machine awesomeness - can query current state many designer improvements - Document Outline is so much more succinct than Designer! Separate WCF Service Contract interfaces and ability to generate activities from contract operations ability to rehydrate to updated flow definitions via DynamicUpdateMap and WorkflowIdentity you can read about the new features here: http://msdn.microsoft.com/en-us/library/hh305677(VS.110).aspx   2013 could be the year of Workflow evangelism for .NET, as it comes together as the DSL language. Eg on Azure it could be used to graphically orchestrate between WebRoles, WorkerRoles and AppFabric Queues and the ServiceBus – that would be grand.   Here’s a list of things I’d like to see in Workflow 5.0: Stronger Parallelism support for true multithreaded workflows . A Workflow executes on a single thread – wouldn’t it be great if we had the ability to model TPL DataFlow? Parallel is not really parallel, just allows AsyncCodeActivity.     support for recursion an ExpressionTree activity with an editor design surface a math activity pack return of application level protocol (3.51 WF services) – automatically expose a state machine as a WCF service with bookmark Receive activities generated from OperationContract automatically placed in state transition triggers. A new HTML5 ActivityDesigner control – support with different CSS3  skinnable hooks,  remote connectivity (had to roll my own) A data flow view – crucial to understanding the big picture Ability to refactor a Sequence to custom activity in a separate .xaml file – like Expression Blend does for UserControl state machine global error handling - if all states goto an error state, you quickly get visual spagetti. Now you could nest a state machine, but what if you want an application level protocol whereby each state exposes certain WCF ops. DSL RAD editing - Make the Document Outline into a DSL editor for adding activities  – For WF to really succeed as a higher level of abstraction, It needs to be more productive than raw coding - drag & drop on the designer is currently too slow compared to just typing code. Extensible Wizard API - for pluggable WF editor experience other execution models beyond Sequence, Flowchart & StateMachine: SSIS, Behavior Trees,  Wolfram Model tool – surprise us! improvements to Designer debugging API - SourceLocation is tied to XAML file line number and char position, and ModelService access seems convoluted - why not leverage WPF LogicalTreeHelper / VisualTreeHelper ? Workflow Team , keep on rocking!

    Read the article

  • Start Time & Calculated Column Wonkiness in a SharePoint Event Calendar

    - by _zekeMouseOver
    I was creating some custom rollups on some of our event calendars and came across a very odd bug when trying to grab only the date component of the built-in Start Time field. One's first inclination will be to create a calculated column and give it the formula... =[Start Time]... and then assign its output type to be "Date Only." This works well until a user adds an All Day Event. For reasons unexplainable, the All Day Event flag causes your =[Start Time] to display the date minus one day. Here is an example of this in action:  Start Date and Time, Duration, Start Date Value and Start Day are all calculated fields. Notice how the Start Date and Time (=[Start Time]) is reporting 6:00PM of the previous day. The Start Date Value (=[Start Time] - Output Type: Number) confirms this (.75 = 6:00 PM.) Curiously enough, the Duration (=[End Time]-[Start Time]) is properly reporting the duration between 12:00AM and 11:59PM. Why? I don't know. Perhaps it's somehow bound to the regional settings on the site, but I'm not interested in changing a global site setting for the sake of one calculated field.With this information at our disposal, our calculated column to display the date part of the start date needs to be modified to add one day to the [Start Time] field if an All Day Event is selected. To determine this, we use the Duration above to assume the item is an all-day event and change our formula to be:=IF(TEXT(([End Time]-[Start Time])-TRUNC(([End Time]-[Start Time]),0),"0.000000000")="0.999305556",[Start Time] + 1, [Start Time])This will work, but what happens when the user de-selects the "All Day Event" checkbox? The duration stays the same, but all other values begin reporting the correct time: Since our formula above is strictly based on an expected duration, it will add one to the correct date, causing the date 5/11/2010 to appear. Notice though that the raw value of the start time (in this case) is a non-fractional number (40,308) whereas the all-day event was being represented as 6:00 PM (.75) of the previous day. We can use this to add one more nested branch of logic to our calculation:=IF(TEXT(([End Time]-[Start Time])-TRUNC(([End Time]-[Start Time]),0),"0.000000000")="0.999305556",IF([Start Time]=ROUND([Start Time],0),[Start Time],[Start Time]+1),[Start Time]) I feel somewhat... dirty about having to resort to this kind of calculation in what SHOULD have been a simple =[Start Time] to extract the date part of the Start Time field, but there you have it. Make sure to shower extra longer after having used it.

    Read the article

  • Data Transformation Pipeline

    - by davenewza
    I have create some kind of data pipeline to transform coordinate data into more useful information. Here is the shell of pipeline: public class PositionPipeline { protected List<IPipelineComponent> components; public PositionPipeline() { components = new List<IPipelineComponent>(); } public PositionPipelineEntity Process(Position position) { foreach (var component in components) { position = component.Execute(position); } return position; } public PositionPipeline RegisterComponent(IPipelineComponent component) { components.Add(component); return this; } } Every IPipelineComponent accepts and returns the same type - a PositionPipelineEntity. Code: public interface IPipelineComponent { PositionPipelineEntity Execute(PositionPipelineEntity position); } The PositionPipelineEntity needs to have many properties, many which are unused in certain components and required in others. Some properties will also have become redundant at the end of the pipeline. For example, these components could be executed: TransformCoordinatesComponent: Parse the raw coordinate data into a Coordinate type. DetermineCountryComponent: Determine and stores country code. DetermineOnRoadComponent: Determine and store whether coordinate is on a road. Code: pipeline .RegisterComponent(new TransformCoordinatesComponent()) .RegisterComponent(new DetermineCountryComponent()) .RegisterComponent(new DetermineOnRoadComponent()); pipeline.Process(positionPipelineEntity); The PositionPipelineEntity type: public class PositionPipelineEntity { // Only relevant to the TransformCoordinatesComponent public decimal RawCoordinateLatitude { get; set; } // Only relevant to the TransformCoordinatesComponent public decimal RawCoordinateLongitude { get; set; } // Required by all components after TransformCoordinatesComponent public Coordinate CoordinateLatitude { get; set; } // Required by all components after TransformCoordinatesComponent public Coordinate CoordinateLongitude { get; set; } // Set in DetermineCountryComponent, not required anywhere. // Requires CoordinateLatitude and CoordinateLongitude (TransformCoordinatesComponent) public string CountryCode { get; set; } // Set in DetermineOnRoadComponent, not required anywhere. // Requires CoordinateLatitude and CoordinateLongitude (TransformCoordinatesComponent) public bool OnRoad { get; set; } } Problems: I'm very concerned about the dependency that a component has on properties. The way to solve this would be to create specific types for each component. The problem then is that I cannot chain them together like this. The other problem is the order of components in the pipeline matters. There is some dependency. The current structure does not provide any static or runtime checking for such a thing. Any feedback would be appreciated.

    Read the article

  • Data Model Dissonance

    - by Tony Davis
    So often at the start of the development of database applications, there is a premature rush to the keyboard. Unless, before we get there, we’ve mapped out and agreed the three data models, the Conceptual, the Logical and the Physical, then the inevitable refactoring will dog development work. It pays to get the data models sorted out up-front, however ‘agile’ you profess to be. The hardest model to get right, the most misunderstood, and the one most neglected by the various modeling tools, is the conceptual data model, and yet it is critical to all that follows. The conceptual model distils what the business understands about itself, and the way it operates. It represents the business rules that govern the required data, its constraints and its properties. The conceptual model uses the terminology of the business and defines the most important entities and their inter-relationships. Don’t assume that the organization’s understanding of these business rules is consistent or accurate. Too often, one department has a subtly different understanding of what an entity means and what it stores, from another. If our conceptual data model fails to resolve such inconsistencies, it will reduce data quality. If we don’t collect and measure the raw data in a consistent way across the whole business, how can we hope to perform meaningful aggregation? The conceptual data model has more to do with business than technology, and as such, developers often regard it as a worthy but rather arcane ceremony like saluting the flag or only eating fish on Friday. However, the consequences of getting it wrong have a direct and painful impact on many aspects of the project. If you adopt a silo-based (a.k.a. Domain driven) approach to development), you are still likely to suffer by starting with an incomplete knowledge of the domain. Even when you have surmounted these problems so that the data entities accurately reflect the business domain that the application represents, there are likely to be dire consequences from abandoning the goal of a shared, enterprise-wide understanding of the business. In reading this, you may recall experiences of the consequence of getting the conceptual data model wrong. I believe that Phil Factor, for example, witnessed the abandonment of a multi-million dollar banking project due to an inadequate conceptual analysis of how the bank defined a ‘customer’. We’d love to hear of any examples you know of development projects poleaxed by errors in the conceptual data model. Cheers, Tony

    Read the article

  • determine if udp socket can be accessed via external client

    - by JohnMerlino
    I don't have access to company firewall server. but supposedly the port 1720 is open on my one ubuntu server. So I want to test it with netcat: sudo nc -ul 1720 The port is listening on the machine ITSELF: sudo netstat -tulpn | grep nc udp 0 0 0.0.0.0:1720 0.0.0.0:* 29477/nc The port is open and in use on the machine ITSELF: lsof -i -n -P | grep 1720 gateway 980 myuser 8u IPv4 187284576 0t0 UDP *:1720 Checked the firewall on current server: sudo ufw allow 1720/udp Skipping adding existing rule Skipping adding existing rule (v6) sudo ufw status verbose | grep 1720 1720/udp ALLOW IN Anywhere 1720/udp ALLOW IN Anywhere (v6) But I try echoing data to it from another computer (I replaced the x's with the real integers): echo "Some data to send" | nc xx.xxx.xx.xxx 1720 But it didn't write anything. So then I try with telnet from the other computer as well: telnet xx.xxx.xx.xxx 1720 Trying xx.xxx.xx.xxx... telnet: connect to address xx.xxx.xx.xxx: Operation timed out telnet: Unable to connect to remote host Although I don't think telnet works with udp sockets. I ran nmap from another computer within the same local network and this is what I got: sudo nmap -v -A -sU -p 1720 xx.xxx.xx.xx Starting Nmap 5.21 ( http://nmap.org ) at 2013-10-31 15:41 EDT NSE: Loaded 36 scripts for scanning. Initiating Ping Scan at 15:41 Scanning xx.xxx.xx.xx [4 ports] Completed Ping Scan at 15:41, 0.10s elapsed (1 total hosts) Initiating Parallel DNS resolution of 1 host. at 15:41 Completed Parallel DNS resolution of 1 host. at 15:41, 0.00s elapsed Initiating UDP Scan at 15:41 Scanning xtremek.com (xx.xxx.xx.xx) [1 port] Completed UDP Scan at 15:41, 0.07s elapsed (1 total ports) Initiating Service scan at 15:41 Initiating OS detection (try #1) against xtremek.com (xx.xxx.xx.xx) Retrying OS detection (try #2) against xtremek.com (xx.xxx.xx.xx) Initiating Traceroute at 15:41 Completed Traceroute at 15:41, 0.01s elapsed NSE: Script scanning xx.xxx.xx.xx. NSE: Script Scanning completed. Nmap scan report for xtremek.com (xx.xxx.xx.xx) Host is up (0.00013s latency). PORT STATE SERVICE VERSION 1720/udp closed unknown Too many fingerprints match this host to give specific OS details Network Distance: 1 hop TRACEROUTE (using port 1720/udp) HOP RTT ADDRESS 1 0.13 ms xtremek.com (xx.xxx.xx.xx) Read data files from: /usr/share/nmap OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 2.04 seconds Raw packets sent: 27 (2128B) | Rcvd: 24 (2248B). The only thing I can think of is a firewall or vpn issue. Is there anything else I can check for before requesting that they look at the firewall server again?

    Read the article

  • How should I land my next consulting gig? [closed]

    - by MrOodles
    For the last couple of years, I've been working on speculative projects, expanding my skillset with side work, and paying the bills while having a blast consulting for startups. However, for a number of personal reasons, I need to spend the next 6-9 months maximizing my cash income. I want to put this into effect starting in early August. So that means I have one month to put the necessary client list/portfolio/resume together to start making this happen. As a programmer, I am very proficient in building Django web apps. I can write the necessary SQL, python, javascript, and css to build every part of a Django app, and then do the system administration necessary to deploy on AWS using EC2. I can also rig up a CDN to work seemlessly with the app using S3 and Cloudfront. I have built GIS applications using GeoDjango and PostGIS, and I have constructed social video apps by implementing Encoding.com as a service to prepare raw video files for consumption on the web. I am also moderately proficient in programming PHP, Java, and C#. I have built web apps in PHP, and desktop apps in Java and C#. I have dabbled with Android applications and iPhone apps, but nothing I would show off. I have experience doing SEO, social media marketing, and content marketing. Many of my clients have needed their apps promoted after they were built, and I was always happy to oblige when I could. I have also worked with biometrics technology including fingerprints for government contractors. This was as much a business analyst role as it was a programming gig, as I had to help answer RFPs, make checklists, and work around reems and reems of regulations to build applications that met very large bureaucratic requirements. I only have two real requirements for my next gig(s): 1) Work remotely. I live in North East Ohio, and I don't plan on leaving, but I wouldn't mind traveling one or two weeks out of every month to service clients who need on-site help. 2) $60.00hr-$∞ USD contracting rate. So what should I do for the next 30 days to achieve this? Should I target some large company and learn the requisite buzzwords to impress them? Should I learn some new language or technology? Polish some skill that I already have? Should I build something using my current skillset, or with some new technology? Should I put a website for my consultancy together to market myself? Should I do that using latest technology x, y, and z? Or should I just slap something up on Tumblr? I'm willing to do anything (moral) over the next 4 weeks to put myself into a position to maximize my income, and I'm open to all and every idea Programmers users may have. Let me hear them.

    Read the article

  • Dual booting windows 8/ubuntu 12.04. Grub doesn't appear and machine never boot in ubuntu

    - by black sensei
    i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance

    Read the article

  • Dual booting windows 8/ubuntu 12.04.2, Grub doesn't appear and machine never boot in ubuntu

    - by black sensei
    i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance EDIT Hey, i just did another trial with 13.04 this time and still no luck. bios: secure-boot: disabled enable CSM : always 1-delete previous ubuntu partition and swap area partition.now having free space 2- used usb installer to prepare usb with ubuntu-13.04-desktop-amd64.iso 3- rebooted : liveusb didnt detect windows 8, used something else 4-created partition ext4 for / 5-created partition for swap-area 6- default grub path is /dev/sda and clicked install Acer always boots into windows.

    Read the article

  • How do you conquer the challenge of designing for large screen real-estate?

    - by Berin Loritsch
    This question is a bit more subjective, but I'm hoping to get some new perspective. I'm so used to designing for a certain screen size (typically 1024x768) that I find that size to not be a problem. Expanding the size to 1280x1024 doesn't buy you enough screen real estate to make an appreciable difference, but will give me a little more breathing room. Basically, I just expand my "grid size" and the same basic design for the slightly smaller screen still works. However, in the last couple of projects my clients were all using 1080p (1920x1080) screens and they wanted solutions to use as much of that real estate as possible. 1920 pixels across provides just under twice the width I am used to, and the wide screen makes some of my old go to design approaches not to work as well. The problem I'm running into is that when presented with so much space, I'm confronted with some major problems. How many columns should I use? The wide format lends itself to a 3 column split with a 2:1:1 split (i.e. the content column bigger than the other two). However, if I go with three columns what do I do with that extra column? How do I make efficient use of the screen real estate? There's a temptation to put everything on the screen at once, but too much information actually makes the application harder to use. White space is important to help make sense of complex information, but too much makes related concepts look too separate. I'm usually working with web applications that have complex data, and visualization and presentation is key to making sense of the raw data. When your user also has a large screen (at least 24"), some information is out of eye sight and you need to move the pointer a long distance. How do you make sure everything that's needed stays within the visual hot points? Simple sites like blogs actually do better when the width is constrained, which results in a lot of wasted real estate. I kind of wonder if having the text box and the text preview side by side would be a big benefit for the admin side of that type of screen? (1:1 two column split). For your answers, I know almost everything in design is "it depends". What I'm looking for is: General principles you use How your approach to design has changed I'm finding that i have to retrain myself how to work with this different format. Every bump in resolution I've worked through to date has been about 25%: 640 to 800 (25% increase), 800 to 1024 (28% increase), and 1024 to 1280 (25% increase). However, the jump from 1280 to 1920 is a good 50% increase in space--the equivalent from jumping from 640 straight to 1024. There was no commonly used middle size to help learn lessons more gradually.

    Read the article

  • Java @Contented annotation to help reduce false sharing

    - by Dave
    See this posting by Aleksey Shipilev for details -- @Contended is something we've wanted for a long time. The JVM provides automatic layout and placement of fields. Usually it'll (a) sort fields by descending size to improve footprint, and (b) pack reference fields so the garbage collector can process a contiguous run of reference fields when tracing. @Contended gives the program a way to provide more explicit guidance with respect to concurrency and false sharing. Using this facility we can sequester hot frequently written shared fields away from other mostly read-only or cold fields. The simple rule is that read-sharing is cheap, and write-sharing is very expensive. We can also pack fields together that tend to be written together by the same thread at about the same time. More generally, we're trying to influence relative field placement to minimize coherency misses. Fields that are accessed closely together in time should be placed proximally in space to promote cache locality. That is, temporal locality should condition spatial locality. Fields accessed together in time should be nearby in space. That having been said, we have to be careful to avoid false sharing and excessive invalidation from coherence traffic. As such, we try to cluster or otherwise sequester fields that tend to written at approximately the same time by the same thread onto the same cache line. Note that there's a tension at play: if we try too hard to minimize single-threaded capacity misses then we can end up with excessive coherency misses running in a parallel environment. Theres no single optimal layout for both single-thread and multithreaded environments. And the ideal layout problem itself is NP-hard. Ideally, a JVM would employ hardware monitoring facilities to detect sharing behavior and change the layout on the fly. That's a bit difficult as we don't yet have the right plumbing to provide efficient and expedient information to the JVM. Hint: we need to disintermediate the OS and hypervisor. Another challenge is that raw field offsets are used in the unsafe facility, so we'd need to address that issue, possibly with an extra level of indirection. Finally, I'd like to be able to pack final fields together as well, as those are known to be read-only.

    Read the article

  • Legal concerns with orchestrating a music submission contest

    - by Amplify91
    My team and I are getting pretty far along in the development of our latest game and have been thinking about audio. We decided to host an audio submission contest where we will offer a little cash and some equity stake in the game as prizes. We are also giving away copies of the game to participants. We hope not only to find audio for our game, but to meet some cool sound artists and promote the game a bit through the process. First of all, is this even a good idea? What are some potential dangers in doing this? Will it even be well received among artists? Secondly, I wrote up some Terms and Conditions in my best legal-speak to try to protect us and clarify how the contest will be run. Are these sufficient to make sure everyone involved is treated fairly and is legally protected? They are as follows: All submissions (The Submission) must be licensed under a Creative Commons Attribution 3.0 Unported License (CC-BY-3.0) By applying a CC-BY-3.0 license, you (The Submitter) expressly give Detour Games (and all members wherein) permission to copy, distribute, transmit, modify, adapt, and make commercial use of The Submission. The Submitter must own all rights to The Submission and be within their rights to license it as specified and submit it. The Submitter claims responsibility for the legality of The Submission. If The Submission is found to infringe on the rights of a person or entity other than those of The Submitter, Detour Games will not be held liable as all responsibility and liability for the legality of The Submission is that of The Submitter's. No more than two free copies of The Game per submitter. All flat cash prizes will only be disbursed pending the success of our first $5,000 Kickstarter campaign. These prizes will be disbursed 30 days after Detour Games receives the Kickstarter funds. All equity prizes (percentage of profits) are defined as the given percent of total profits after costs for a period of one year (12 months) after the release of RAW. These prizes will be disbursed semi-annually. All prize money will be disbursed through either an electronic fund transfer through a service such as PayPal or by a mailed money order. It is The Submitter's responsibility to cooperate with Detour Games in the disbursement of the funds. Detour Games reserves the right to change these Terms and Conditions at any time without notice. By participating in the contest, The Submitter agrees to and accepts all terms and conditions listed. What else could I do (legally) to protect everyone involved?

    Read the article

  • Normal Redundancy (Double Mirroring) Option Available

    - by TammyBednar
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} The Oracle Database Appliance 2.4 Patch was released last week and provides you an option of ASM normal redundancy (double mirroring) during the initial deployment of the Database Appliance. The default deployment of the Oracle Database Appliance is high redundancy for the +DATA and +RECO disk groups. While there is 12TB of raw shared storage available, the Database Backup Location and Disk Group Redundancy govern how much usable storage is presented after the initial deployment is completed. The Database Backup Location options are Local or External. When the Local Backup Option is selected, this means that 60% of the available shared storage will be allocated for the Fast Recovery Area that contains database backups and archive logs. The External Backup Option will allocate 20% of the available shared storage to the Fast Recovery Area. So, let’s look at an example of High Redundancy and External Backups. Disk Group Redundancy – High --> Triple Mirroring to provide ~4TB of available storage Database Backup Location – External --> 20% of available shared storage allocated to +RECO +DATA = 3.2TB of usable storage, +RECO = 0.8TB of usable storage What about Normal Redundancy with External Backups? Disk Group Redundancy – Normal --> Double Mirroring to provide ~6TB of available storage Database Backup Location – External --> 20% of available shared storage allocated to +RECO +DATA = 4.8TB of usable storage, +RECO = 1.2TB of usable storage As a best practice, we would recommend using Normal Redundancy for your test and/or development Oracle Database Appliances and High Redundancy for production.

    Read the article

  • UNIX - mount: only root can do that

    - by Travesty3
    I need to allow a non-root user to mount/unmount a device. I am a total noob when it comes to UNIX, so please dumb it down for me. I've been looking all over teh interwebz to find an answer and it seems everyone is giving the same one, which is to modify /etc/fstab to include that device with the 'user' option (or 'users', tried both). Cool, well I did that and it still says "mount: only root can do that". Here are the contents of my fstab: # /etc/fstab: static file system information. # # Use 'vol_id --uuid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 # / was on /dev/mapper/minicc-root during installation UUID=1a69f02a-a049-4411-8c57-ff4ebd8bb933 / ext3 relatime,errors=remount-ro 0 1 # /boot was on /dev/sda5 during installation UUID=038498fe-1267-44c4-8788-e1354d71faf5 /boot ext2 relatime 0 2 # swap was on /dev/mapper/minicc-swap_1 during installation UUID=0bb583aa-84a8-43ef-98c4-c6cb25d20715 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/scd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 /dev/sdb1 /mnt/sdcard auto auto,user,rw,exec 0 0 My thumb drive partition shows up as /dev/sdb1. I'm pretty sure my fstab is set up OK, but everyone on the other posts seems to fail to mention how they actually call the 'mount' command once this entry is in the fstab file. I think this is where my problem may be. The command I use to mount the drive is: $ mount /dev/sdb1 /mnt/sdcard. /bin/mount is owned by root and is in the root group and has 4755 permissions. /bin/umount is owned by root and is in the root group and has 4755 permissions. /mnt/sdcard is owned by me and is in one of my groups and has 0755 permissions. My mount command works fine if I use sudo, but I need to be able to do this without sudo (need to be able to do it from a PHP script using shell_exec). Any suggestions? Sorry for making you read so much...just trying to get as much info in the initial post as possible to preemptively answer questions about configuration stuff. If I missed anything tho, ask away. Thanks! -Travis

    Read the article

  • Uninstall php and nginx or fix setup

    - by jreed121
    First off, I'm a huge linux noob - sorry... I'm trying to setup nginx with php-fpm on debian and I'm pretty sure that I've completely screwed it up. nginx seems to be running fine because I can it it from a web browser and it load the stock "Welcome to nginx!" page. I'm not so sure about php-fpm though. When I try something like # restart php-fpm I get: bash: restart: command not found First off php-fpm some how got installed as php5-fpm when I do root@server:/etc/init.d# ls, which seems to contradict every tutorial and help doc I've read (supposed to be 'php-fpm'). I can restart it with this: service php5-fpm restart And just enter the package name 'php5-fpm' I get this: root@server:~# php5-fpm [17-Nov-2012 23:15:36] NOTICE: PHP message: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/suhosin.so' - /usr/lib/php5/20100525/suhosin.so: cannot open shared object file: No such file or directory in Unknown on line 0 [17-Nov-2012 23:15:36] ERROR: An another FPM instance seems to already listen on /var/run/php5-fpm.sock [17-Nov-2012 23:15:36] ERROR: FPM initialization failed The root for nginx is /usr/share/nginx/html, when I try to navigate to a .php file in there with my web browser, it tries to download the file instead of interpret it. I would like this folder to be in my user's home directory ie: /home/administrator/www or /home/nginx/www. I know in order to do this I need to modify nginx.conf, but I find that configuration file difficult to understand. I suppose the fact that my .php scripts aren't being handled is my bigger problem anyways. When I try to see what running on port 9000 (php-fpm default port) with lsof -i :9000 it returns nothing - I guess indicating that it isn't listening. then I head over to vim /etc/php5/fpm/php-fpm.conf and there is no where to designate a port number. So should I just uninstall everything and start from scratch? If so, how do I clean it all up? Any suggestions for a tutorial once I'm ready to try again? Should I attempt to troubleshoot this mess? If so where should I start? Sorry guys, I'm feeling pretty stupid and lost right now. I'm not sure what my next steps are in trying to resolve this issue are. I realize that this is a horrible question for this type of Q&A site, but I'd really appreciate any guidance.

    Read the article

  • Computer experiencing slowdowns and lockups despite low cpu useage

    - by user157145
    my setup i5-2300 nvidia gtx 550 ti 6 gigs ram 600 w ocz modular psu recently reformatted and already experiencing drastic slowdown as soon as windows comes up, including repeated lockups with multiple various programs reporting that they are not responsive, then recovering after 10-30 seconds. ive checked memory and hard drive both of which come out fine. despite my plethura of worthless antiviral software im forced to assume that my illicit downloading practices have lead me into some comp trouble that i cant seem to determine. i have used ccleaner, search and destroy and malware bytes, all of which have found nothing to indicate what is causing this massive slowdown. in addition according to my resource manager my computer is operating at a load of only 30-50 percent CPU useage and 60 ram useage but taking 5-10 seconds to load files and open folders, and repeated lockups of multiple programs, especially firefox which seems to go unresponsive every 2-3 minutes. any help would be appreciated, i used a program called OTL by old timer, but cant make any sense of the results i was given. any help or suggestions would be appreciated, thank you for taking the time to read this i have avast but it didnt even find anything when i had it do a full system scan, so im thinking its clueless(also nortons, avg, and ad-aware). i also have mse but it has yet to complete a full scan it takes so long (i left it on last night but when i woke up my computer had a problem and had to restart). my hard drive has 300 gigs out of 1tb open and i already used hd tune pro, which said my harddrive was fine and its not a ssd. also im a noob at comps and only have the hd that is currently inside the computer in addition im not sure if studdering is the issue im suffering. my problem is that during my typing of these responses firefox has gone "not responsive" at least 5 times, each for times of about 5-10 seconds. when i try to control alt delete to bring up windows task manager it took 20 seconds. essentially its that my computer goes super slow at bringing up anything, or taking any action whatsoever that opens a program or file and has repeated incidents where i cant even click on whatever im trying to do because it locks up. the confusing thing about these incidents is that its right after restarting where there are minimal programs running and the computer and memory load is light.

    Read the article

  • Postfix issues sending mail to addresses under domain located on server

    - by iamthewit
    I recently installed virtualmin on my nice shiny new rackspace cloud. Everything went seemlessly but I've been having some issues getting emails to send properly. The problem seems to be that the server can not send mail to email addresses where the domain is owned by my server. For example, on my server I run multiple virtual domains, lets call this one test.com. When I run the mail command from shell (mail [email protected]) I get the following back from my maillog: Oct 6 14:55:18 test postfix/pickup[8737]: DC1131612CC: uid=0 from= Oct 6 14:55:18 test postfix/cleanup[8769]: DC1131612CC: [email protected] Oct 6 14:55:18 test postfix/qmgr[8738]: DC1131612CC: [email protected], size=353, nrcpt=1 (queue active) Oct 6 14:55:18 test postfix/error[8771]: DC1131612CC: [email protected], relay=none, delay=0, delays=0/0/0/0, dsn=5.0.0, status=bounced (User unknown in virtual alias table) Oct 6 14:55:18 test postfix/cleanup[8769]: DD07D1612D1: [email protected] Oct 6 14:55:18 test postfix/bounce[8772]: DC1131612CC: sender non-delivery notification: DD07D1612D1 Oct 6 14:55:18 test postfix/qmgr[8738]: DD07D1612D1: from=<, size=2268, nrcpt=1 (queue active) Oct 6 14:55:18 test postfix/qmgr[8738]: DC1131612CC: removed Oct 6 14:55:18 test postfix/local[8773]: DD07D1612D1: [email protected], relay=local, delay=0.03, delays=0/0/0/0.03, dsn=2.0.0, status=sent (delivered to command: /usr/bin/procmail-wrapper -o -a $DOMAIN -d $LOGNAME) Oct 6 14:55:18 test postfix/qmgr[8738]: DD07D1612D1: removed when I run mail [email protected] the message is sent and received perfectly fine. I'm a bit of a noob when it comes to servers, but I pick things up fairly quickly, so please excuse any incorrect terminology and my general noobiness. Any help would be greatly appreciated, I've been googling for quite a while but I haven't found a solution yet, I'll add a copy of my main.cf file in a response below cheers guys here is the reformatted postconf, do you want the reformatted main.cf file too, or is this enough? alias_database = hash:/etc/postfix/aliases alias_maps = hash:/etc/postfix/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no mailbox_command = /usr/bin/procmail-wrapper -o -a $DOMAIN -d $LOGNAME mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man myhostname = server.test.com newaliases_path = /usr/bin/newaliases.postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sender_bcc_maps = hash:/etc/postfix/bcc sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = permit_mynetworks permit_sasl_authenticated reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous unknown_local_recipient_reject_code = 550 virtual_alias_maps = hash:/etc/postfix/virtual

    Read the article

  • Which hardware to VM ratio for Build-Server virtualization?

    - by Martin
    Let's start with saying that I'm a total noob wrt. to server virtualization. That is, I use VMs often during development, but they're simple desktop machine things for me. Now to my problem: We have two (physical) build servers, one master, one slave running Jenkins to do daily tasks and build (Visual C++ Builds) our release packages for our software. As such these machines are critical to our company, because we do lot's releases and without a controlled environment to create them, we can't ship fixes. (And currently there's no proper backup of these machines in place, because they do not hold any data as such - it just would be a major pain to setup them again should they go bust. (But setting up backup that I'd know would work in case of HW failure would even be more pain, so we have skipped that until now.)) Therefore (and for scaling purposes) we would like to go virtual with these machines. Outsourcing to the cloud is not an option, not at all, so we'll have to use on-premises hardware and VM hosts. Each Build-Server (master or slave) is a fully configured (installs, licenses, shares in case of the master, ...) Windows Server box. I would now ideally like to just convert the (two) existing physical nodes to VM images and run them. Later add more VM slave instances as clones of the existing ones. And here begin my questions: Should I go for one VM per one hardware-box or should I go for something where a single hardware runs multiple VMs? That would mean a single point of failure hardware wise and doesn't seem like a good idea ... or?? Since we're doing C++ compilation with Visual Studio, I assume that during a build the hardware (processor cores + disk) will be fully utilized, so going with more than one build-node per hardware doesn't seem to make much sense?? Wrt. to hardware options, does it make any difference which VM software we use (VMWare, MS, Virtualbox, ... ?) (We're using Windows exclusively for our builds.) Regarding budget: We have a normal small company (20 developers) budget for this. ;-) That is, if it's going to cost a few k$ it's going to cost. If it's free - the better. I strongly prefer solutions where there's no multi-k$ maintenance costs per year.

    Read the article

  • Excel 2010: dynamic update of drop down list based upon datasource validation worksheet changes

    - by hornetbzz
    I have one worksheet for setting up the data sources of multiple data validation lists. in other words, I'm using this worksheet to provide drop down lists to multiple other worksheets. I need to dynamically update all worksheets upon any of a single or several changes on the data source worksheet. I may understand this should come with event macro over the entire workbook. My question is how to achieve this keeping the "OFFSET" formula across the whole workbook ? Thx To support my question, I put the piece of code that I'm trying to get it working : Provided the following informations : I'm using such a formula for a pseudo dynamic update of the drop down lists, for example : =OFFSET(MyDataSourceSheet!$O$2;0;0;COUNTA(MyDataSourceSheet!O:O)-1) I looked into the pearson book event chapter but I'm too noob for this. I understand this macro and implemented it successfully as a test with the drop down list on the same worksheet as the data source. My point is that I don't know how to deploy this over a complete workbook. Macro related to the datasource worksheet : Option Explicit Private Sub Worksheet_Change(ByVal Target As Range) ' Macro to update all worksheets with drop down list referenced upon ' this data source worksheet, base on ref names Dim cell As Range Dim isect As Range Dim vOldValue As Variant, vNewValue As Variant Dim dvLists(1 To 6) As String 'data validation area Dim OneValidationListName As Variant dvLists(1) = "mylist1" dvLists(2) = "mylist2" dvLists(3) = "mylist3" dvLists(4) = "mylist4" dvLists(5) = "mylist5" dvLists(6) = "mylist6" On Error GoTo errorHandler For Each OneValidationListName In dvLists 'Set isect = Application.Intersect(Target, ThisWorkbook.Names("STEP").RefersToRange) Set isect = Application.Intersect(Target, ThisWorkbook.Names(OneValidationListName).RefersToRange) ' If a change occured in the source data sheet If Not isect Is Nothing Then ' Prevent infinite loops Application.EnableEvents = False ' Get previous value of this cell With Target vNewValue = .Value Application.Undo vOldValue = .Value .Value = vNewValue End With ' LOCAL dropdown lists : For every cell with validation For Each cell In Me.UsedRange.SpecialCells(xlCellTypeAllValidation) With cell ' If it has list validation AND the validation formula matches AND the value is the old value If .Validation.Type = 3 And .Validation.Formula1 = "=" & OneValidationListName And .Value = vOldValue Then ' Debug ' MsgBox "Address: " & Target.Address ' Change the cell value cell.Value = vNewValue End If End With Next cell ' Call to other worksheets update macros Call Sheets(5).UpdateDropDownList(vOldValue, vNewValue) ' GoTo NowGetOut Application.EnableEvents = True End If Next OneValidationListName NowGetOut: Application.EnableEvents = True Exit Sub errorHandler: MsgBox "Err " & Err.Number & " : " & Err.Description Resume NowGetOut End Sub Macro UpdateDropDownList related to the destination worksheet : Sub UpdateDropDownList(Optional vOldValue As Variant, Optional vNewValue As Variant) ' Debug MsgBox "Received info for update : " & vNewValue ' For every cell with validation For Each cell In Me.UsedRange.SpecialCells(xlCellTypeAllValidation) With cell ' If it has list validation AND the validation formula matches AND the value is the old value ' If .Validation.Type = 3 And .Value = vOldValue Then If .Validation.Type = 3 And .Value = vOldValue Then ' Change the cell value cell.Value = vNewValue End If End With Next cell End Sub

    Read the article

  • Can't install Git

    - by davemc
    Im following the tutorial below to install git. https://help.github.com/articles/set-up-git However when I get to the end where I need to install the helper into the same directory where Git itself is installed i get the following error: Davids-iMac:~ davidcavanagh$ which git /usr/bin/git Davids-iMac:~ davidcavanagh$ sudo mv git-credential-osxkeychain /usr/bin mv: rename git-credential-osxkeychain to /usr/bin/git-credential-osxkeychain: No such file or directory Davids-iMac:~ davidcavanagh$ Edit: I am now getting the following error when I install git and then run git -version Davids-iMac:~ davidcavanagh$ git -version /usr/bin/git: line 1: syntax error near unexpected token `newline' /usr/bin/git: line 1: `<?xml version="1.0" encoding="UTF-8"?>' I was following this tutorial guide:https://help.github.com/articles/set-up-git I have also tried using home-brew as well and I get the following error when I do this: Davids-iMac:~ davidcavanagh$ ruby -e "$(curl -fsSkL raw.github.com/mxcl/homebrew/go)" ==> This script will install: /usr/local/bin/brew /usr/local/Library/... /usr/local/share/man/man1/brew.1 Press ENTER to continue or any other key to abort ==> Downloading and Installing Homebrew... Failed during: git init -q Can anyone help? Thanks

    Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >