Search Results

Search found 14588 results on 584 pages for 'usb drive'.

Page 89/584 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

  • Upon USB insert, record unique identifer sting, format drive to FAT32 and copy a file. Bash or Pytho

    - by samsixty
    Hello, This is what I want to do, insert USB flash drive. mount it. record uniquie identifer string to a file. format the drive to FAT32. copy a text file to the drive. unmount it. remove the drive. 30 times The situation is this, I have bought 30 usb drives. I need to format each one to ensure they are clean, I need the unique string from each device. I need to put the same txt file on each one. I am not great at writing scripts but can read and follow bash and python. Any pointers would be appreciated.

    Read the article

  • Test-Drive ASP.NET MVC Review

    - by Ben Griswold
    A few years back I started dallying with test-driven development, but I never fully committed to the practice. This wasn’t because I didn’t believe in the value of TDD; it was more a matter of not completely understanding how to incorporate “test first” into my everyday development. Back in my web forms days, I could point fingers at the framework for my ignorance and laziness. After all, web forms weren’t exactly designed for testability so who could blame me for not embracing TDD in those conditions, right? But when I switched to ASP.NET MVC and quickly found myself fresh out of excuses and it became instantly clear that it was time to get my head around red-green-refactor once and for all or I would regretfully miss out on one of the biggest selling points the new framework had to offer. I have previously written about how I learned ASP.NET MVC. It was primarily hands on learning but I did read a couple of ASP.NET MVC books along the way. The books I read dedicated a chapter or two to TDD and they certainly addressed the benefits of TDD and how MVC was designed with testability in mind, but TDD was merely an afterthought compared to, well, teaching one how to code the model, view and controller. This approach made some sense, and I learned a bunch about MVC from those books, but when it came to TDD the books were just a teaser and an opportunity missed.  But then I got lucky – Jonathan McCracken contacted me and asked if I’d review his book, Test-Drive ASP.NET MVC, and it was just what I needed to get over the TDD hump. As the title suggests, Test-Drive ASP.NET MVC takes a different approach to learning MVC as it focuses on testing right from the very start. McCracken wastes no time and swiftly familiarizes us with the framework by building out a trivial Quote-O-Matic application and then dedicates the better part of his book to testing first – first by explaining TDD and then coding a full-featured Getting Organized application inspired by David Allen’s popular book, Getting Things Done. If you are a learn-by-example kind of coder (like me), you will instantly appreciate and enjoy McCracken’s style – its fast-moving, pragmatic and focused on only the most relevant information required to get you going with ASP.NET MVC and TDD. The book continues with the test-first theme but McCracken moves away from the sample application and incorporates other practical skills like persisting models with NHibernate, leveraging Inversion of Control with the IControllerFactory and building a RESTful web service. What I most appreciated about this section was McCracken’s use of and praise for open source libraries like Rhino Mocks, SQLite and StructureMap (to name just a few) and productivity tools like ReSharper, Web Platform Installer and ASP.NET SQL Server Setup Wizard.  McCracken’s emphasis on real world, pragmatic development was clearly demonstrated in every tool choice, straight-forward code block and developer tip. Whether one is already familiar with the tools/tips or not, McCracken’s thought process is easily understood and appreciated. The final section of the book walks the reader through security and deployment – everything from error handling and logging with ELMAH, to ASP.NET Health Monitoring, to using MSBuild with automated builds, to the deployment  of ASP.NET MVC to various web environments. These chapters, like those prior, offer enough information and explanation to simply help you get the job done.  Do I believe Test-Drive ASP.NET MVC will turn you into an expert MVC developer overnight?  Well, no.  I don’t think any book can make that claim.  If that were possible, I think book list prices would skyrocket!  That said, Test-Drive ASP.NET MVC provides a solid foundation and a unique (and dare I say necessary) approach to learning ASP.NET MVC.  Along the way McCracken shares loads of very practical software development tips and references numerous tools and libraries. The bottom line is it’s a great ASP.NET MVC primer – if you’re new to ASP.NET MVC it’s just what you need to get started.  Do I believe Test-Drive ASP.NET MVC will give you everything you need to start employing TDD in your everyday development?  Well, I used to think that learning TDD required a lot of practice and, if you’re lucky enough, the guidance of a mentor or coach.  I used to think that one couldn’t learn TDD from a book alone. Well, I’m still no pro, but I’m testing first now and Jonathan McCracken and his book, Test-Drive ASP.NET MVC, played a big part in making this happen.  If you are an MVC developer and a TDD newb, Test-Drive ASP.NET MVC is just the book for you.

    Read the article

  • Hard drive not correctly recognized on a new Windows 7 installation, but works correctly on Windows XP

    - by david
    I'm having problems configuring a hard disk in a brand new, clean Windows 7 installation. System specs: Hard disk: WD VelociRaptor WD6000HLHX (600 GB, 10000 RPM) Motherboard: Gigabyte Z77X-UD3H BIOS SATA mode set to AHCI (not RAID), with disk connected to SATA0 (6 Gb/s port). Windows 7 Enterprise SP1 64-bit The disk is recognized by the BIOS and is correctly identified, with the name and size correctly reported. Windows recognizes the disk itself and reports the device is functioning correctly, but it doesn't appear in Explorer. Disk Management shows the drive, but incorrectly states that it is uninitialized and has no partitions. If I try to initialize the drive, I get an error saying that "the system cannot find the file specified" (what file?). Before connecting the drive to the new machine, I partitioned and formatted it under Windows XP SP2, creating 2 partitions (MBR, not GPT) and copying over a boatload of data. However, none of this data appears under Windows 7. If I put the disk back into the Windows XP machine, I can access the disk and all of its data. Is it possible to get Windows 7 to correctly recognize the disk without having to erase it and start over? If so, how do I do so? I checked this question, which seems to cover the same issue, but it didn't help.

    Read the article

  • automatically starting crashplan backup when a usb harddisc is connected

    - by Stefan Armbruster
    Using CrashPlan I've configured two backup sets: online backup in crashplan's cloud (this is running perfectly) a local backup on a usb harddisc directly connected to the local laptop. The USB drive is only connected rarly when being at home. When connecting the drive it mounts automatically. Is there a way to start the local backup whenever the usb disc connected. My guess is that using udev it should be possible to "somehow" tell crashplan to reevaluate the presence of backup location. Any ideas to do this?

    Read the article

  • How To Access the Developer Options Menu and Enable USB Debugging on Android 4.2

    - by Chris Hoffman
    In Android 4.2, the Developer Options menu and USB Debugging option have been hidden. If you need to enable USB Debugging, you can access the Developer Options menu with a quick trick. The developer options aren’t just used by developers. USB Debugging is required by adb, which is used for rooting an Android device, backing it up, installing a custom ROM, taking screenshots from a computer, or doing many other things. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

    Read the article

  • Is there any free software to check for issues with a DVD drive?

    - by AgentConundrum
    I don't usually play movies on my laptop (prefer the standalone with the tv), but I tried to watch one the other night, and noticed playback was really choppy and had audio artifacts in places. I thought it could be related to memory issues so I rebooted and tried again, but the results were the same. I considered that it could be an issue with the disc, so I tried to clean it but again there was no change. I don't think the problem is with the disc, because I tried another disc and it also had the same problem. I don't think I've ever watched the second disc since I've had it, so it should have been safe in its jewel case. Also, there were no issues when I watched an episode off the first disc in my standalone player. What I'm wondering is: are there are any (free) utilities that can check for issues with the drive itself? I looked around but most of the software I found focuses on integrity checks for the disc, not the drive. I have had issues with this laptop recently (had to replace the keyboard when the cat damaged it while I was cleaning dust out and the machine was ripped apart, also replaced part of the chassis after I cracked it when I tried to open it not knowing a screw was still in it) so I may have just replaced the drive incorrectly. I'm going to check on this while I await an answer to this question. Thanks.

    Read the article

  • RTL8188CU USB Network Adaptor on ubuntu 13.04

    - by Daniel B
    I have an RTL8188CU USB Network Adaptor. On Ubuntu 12.10 I had to download RTL8188C_8192C_USB_linux_v3.4.4_4749.20121105 because the built-in rtl8192cu driver did not work on the 64bit system (Tested fine on 32bit). Now I have upgraded to Ubuntu 13.04 and of cause the switch from kernel 3.4 to 3.8 broke the compatibility with the driver source. And (Like I suspected), the 64bit issue with rtl8192cu has still not been resolved. Since Realtek has not yet provided a new driver source, I have no working network on my computer (I use USB Tethering from my mobile at the moment). I tried downloading the Windows driver and set it up with ndiswrapper, but as soon as I activate the ndiswrapper module while having that driver installed, I get a kernel panic. Since I cannot be the only one using this USB Adaptor, I wanted to see if someone else might have found a solution to get something working? Someone might even have a solution as to why the built-in 64bit driver does not work?

    Read the article

  • My ubuntu partition was deleted and I can't boot from either a DVD or USB

    - by ropudito
    It's my first time installing ubuntu. I have Windows 7 and 8 before in my laptop (Acer Aspire 4752z). After Ubuntu (12.04) installed in my laptop, the Windows boot loader didn't recognize my Ubuntu so I updated grub from a live USB. And after grub updated, Ubuntu was booting perfectly but my Windows wasn't listed in the grub menu. So I follow someone instruction to update grub again. And after reboot, the grub menu didn't show anymore. After searching about this problem on the net and trying to update grub again and again, I decided to delete the Ubuntu partition from live USB. And shortly after, I booted to Windows with Hiren boot and I used mbrfix. But i think it failed. Now i cant show my BIOS setup or boot from DVD or USB. After that, the only screen i can see after booting is: error: unknown filesystem grub rescue>

    Read the article

  • Hard drive degredation from large memory usage and paging files?

    - by Stephen R
    I've had a question(s) regarding computer degradation going through my head for a while and haven't found many good resources for researching it. 1) First off, when is the virtual RAM/paging file on a hard drive used by Windows? Is it used when the RAM is full? Or does it use the Virtual RAM/paging file as intermediate caching between the RAM and actual hard drive space all the time? 2) If I were to run many applications on my computer at the same time and have a bad habit of doing this for the entire lifetime of the computer, does it use more of the virtual RAM/paging file than if I were to have fewer programs running? Just to note, the RAM never fills up on my computer but it is used heavily. 3) By extension of question 2, if the virtual RAM/paging file is used more heavily, would that result in rapid hard drive degradation? I have seen a pattern among all of the computers that I have owned or used in the past 5 years. I am the kind of person to leave my web browser up with 40 tabs among other programs which will eat up 40% of my memory typically. Over time my computer will slow down, browsers start crashing, programs start seizing up or crashing themselves, eventually the computer becomes essentially unusable. I have been trying to rack my mind to come up with a solution other than to purchase a new PC to have it die on me in the next couple years as well. This is the only thought that has come to mind that might have a simple hardware fix...Windows ReadyBoost...Maybe? I'd like to be able to discuss this so I can learn something about all of the above. Thanks.

    Read the article

  • How To Use USB Drives With the Nexus 7 and Other Android Devices

    - by Chris Hoffman
    The Nexus 7 may not have a lot of storage space – especially the original 8 GB model – but you can connect a USB drive to it if you want to watch videos or access other files. Unfortunately, Android doesn’t automatically mount USB drives by default. You’ll need to root your device to enable support for USB drives. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

    Read the article

  • I am not able to delete a corrupt NTFS partition on my pen drive. How can I force its deletion?

    - by yesuraj
    I formatted my 16GB pen drive with the NTFS file system in windows vista. After that I started copying some files. However, only a few files were copied to the pen drive before the copy operation hung. So I cancelled the copy operation. Now I am unable to use the pen drive. I DON'T REALLY NEED ANY FILES THAT I COPIED TO THE PENDRIVE. I JUST WANT TO USE THE PENDRIVE AGAIN. I have tried using Ubuntu to format the pen drive. But when i use fdisk to delete the partition, it looks like it is working fine but in fact it does not delete the partition. Also I am unable to format it with any other file system. When I tried to use gparted, it throws the following error: Error mounting: mount exited with exit code 14: The disk contains an unclean file system(0,0). The file system wasn't safely closed on window. Fixing ntfs_attr_pread_i:ntfs_pread failed: Input/output error Failed to read NTFS$Bitmap:Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a softRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into windows twice. The usage of the /f parameter is very important!. If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the dmraid documentation for more details When I searched the Internet I found help on how to recover. But I don’t want to recover, I want to format it again. When I pressed w after deleting the partition, it took more time than previously. After that i removed the pen drive and re-inserted, but the partition I had deleted was still present. If I simply type the command fdisk /dev/sdb without removing the pen drive after the partition is deleted, then it returns the error message Unable to open /dev/sdb. Here are the steps that I followed: root@yesuraj-ubuntu:~# fdisk /dev/sdb Command (m for help): d Selected partition 1 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks THE DEMESG PRINTS ARE AS FOLLOWS, [ 6139.774753] usb 2-1.3: reset high speed USB device number 4 using ehci_hcd [ 6154.816941] usb 2-1.3: device descriptor read/64, error -110 [ 6169.968908] usb 2-1.3: device descriptor read/64, error -110 [ 6170.158427] usb 2-1.3: reset high speed USB device number 4 using ehci_hcd [ 6185.200638] usb 2-1.3: device descriptor read/64, error -110 [ 6200.352572] usb 2-1.3: device descriptor read/64, error -110 [ 6200.542093] usb 2-1.3: reset high speed USB device number 4 using ehci_hcd [ 6205.559460] usb 2-1.3: device descriptor read/8, error -110 I used the dd command and it erased the partition table. But now when I connect the pen drive, dmesg contains this error message: [88143.437001] sdb: unknown partition table. I am not able to create a partion using fdisk /dev/sdb. The error message says that it is unable to find the node. Other messages from dmesg follow below. [87100.531596] usb 2-1.3: new high speed USB device number 39 using ehci_hcd [87130.915257] usb 2-1.3: new high speed USB device number 40 using ehci_hcd [87135.932647] usb 2-1.3: device descriptor read/8, error -110

    Read the article

  • How To Run Chrome OS From a USB Drive and Use It On Any Computer

    - by Chris Hoffman
    Google only supports running Chrome OS on Chromebooks, but don’t let that stop you. You can put Chrome OS on a USB drive and boot it on any computer, just as you’d run a Linux distribution from a USB drive. If you just want to test Chrome OS, your best bet is running it in a virtual machine. This ensures that you won’t run into any hardware-related issues. Your computer may not be able to run Chrome OS properly. Note: You’ll need a USB drive with at least 4 GB of space for this. 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full 10 Awesome Improvements For Desktop Users in Windows 8

    Read the article

  • Ubuntu 13.XX unable to mount USB HDD. Tried everything. I/O error boot sector/file system

    - by XaviGG
    I know that there are many posts related but none of them helped me. I will jump to the last test because it is the one that should work, but it does not. An external HDD with single partition slow NTFS formatted in Windows, empty and clean. Checked for errors, it tells that not errors where found. Moving to Ubutnu 13.04... Gparted throws the first error when trying to read the disk: Input/output error It appears as unknown the content of the disk. Unable to create partition table or format it, getting the same error when trying. If I try to mount it in the terminal it tells me the same, specifying that also there is an I/O error reading the boot sector. I have this problem since I upgraded (always with fresh install) to 13.04. I thought it will be solved by the 13.10 but it has the same behavior. I tried with two different HDD (HD and SSHD) that work perfectly in Windows 7. In 13.04 at least I got a trying of mounting where the icon of the drive started showing and disappearing until finally it disappeared. But now it doesn't even try. Possible causes: -The HDD was my old main HDD, so it had WIN,RECOVERY,SYSTEM,UBU,SWAP partitions. Maybe the way or place where the partition table is defined is not the best for an external HDD but I don't know a lot in that topic. I would appreciate a lot if someone can give me a guideline to convert one of these HDD in a working external HDD. No files to recover, nothing to care about. Just format completely the disk and be able to use it for storing backups without having to move the files first to the windows partition, load windows and then copy them to the external HDD. Because I want to use a file comparator for the backups. Thanks a lot Edit 1: I found an option in Windows to convert it to a dynamic HDD that warns me that I wont be able to run O.S. after changing. I suppose that is what I need because in the current mode I cannot safely extract it. But it tells me an error that it couldn't change the mode.

    Read the article

  • Ubuntu install problem: "USB disconnect address 2"

    - by explorex
    Hi, I am installing ubuntu 10.10 and i am having problem in "Who are you?" section. How long will it take to install. i have been waiting for more than 20 minutes. and still i am not being able to click forward button. in ready when you are ... console i am getting message curr DATE ubuntu kernel: [ 684.152061 ] usb 5-1:USB disconnect address 2 whats happening i have no idea, but live stick is working fine. I am installing for USB drive and i have internet turned off edit:: now i am getting message curr Date ubuntu: CRON[9268]: (root) CMD (start -q anacron || :) for past 15 minutes

    Read the article

  • Kernel panic when booting from USB

    - by maaartinus
    I downloaded ubuntu-11.04-desktop-amd64.iso and used Universal-USB-Installer-1.8.6.3.exe to format my USB stick und put the ISO on it. When I tried to install from it, I've got a kernel panic just like here, except for the version number (mine was 2.6.38-8-generic #42-ubuntu). My ISO image seems to work, as I installed it into a VMWare player without problems. Booting Linux from USB works surely too, as I did it some time ago with an older Ubuntu version. I can imagine things to try out, e.g., write the image again, try another version, pray, look for patches, etc. However, I'm looking for a time-efficient solution, something what most probably works. An advice of the sort "wait two weeks until it's surely fixed, then download again" is acceptable, I'm determined to switch to Linux, but it can wait a bit.

    Read the article

  • How to create a bootable system with a squashfs root

    - by cldfzn
    My goal is to be able to take a customized root file system loaded with the software I want. So far I've created a squashed filesystem using debootstrap and chroot to install the software I want on the system. The problem I am now running in to.. whenever I boot in to the system, my user accounts that were set up in the chroot do not work. First boot everything works out, second boot I can't log in. That is baffling to me. Any one know a reason or a place to start looking? Update To get a working system with a squashfs filesystem: sudo apt-get install live-boot live-boot-initramfs-tools extlinux sudo update-initramfs -u Create a squashfs file from a bootstrapped or running ubuntu filesystem with whatever packages you want available. https://help.ubuntu.com/community/LiveCDCustomizationFromScratch provides good instructions for creating a debootstrapped system to build on. Format the target drive with ext2/3/4 and enable the bootable flag. Create the folder layout on the target drive and install extlinux: mkdir -p ${TARGET}/boot/extlinux ${TARGET}/live extlinux -i ${TARGET}/boot/extlinux dd if=/usr/lib/syslinux/mbr.bin of=/dev/sdX #X is the drive letter cp /boot/vmlinuz-$(uname -r) ${TARGET}/boot/vmlinuz cp /boot/initrd.img-$(uname -r) ${TARGET}/boot/initrd cp filesystem.squashfs ${TARGET}/live Create ${TARGET}/boot/extlinux/extlinux.conf with the following contents: DEFAULT Live LABEL Live KERNEL /boot/vmlinuz APPEND initrd=/boot/initrd boot=live toram=filesystem.squashfs TIMEOUT 10 PROMPT 0 Now you should be able to boot from the target drive in to your squashed system.

    Read the article

  • How to slave a 3.5" 500gb SATA external hard drive (Western Digital) to my Dell Inspiron laptop

    - by AJ HDD
    I have a 3.5" Western Digital My Book 500gb external hard drive. I gave it to a friend of mine, and he broke the USB port in it. I went to a nearby comp repair shop and had him solder the thing, and it didn't detect when it when I plugged it into my Dell Inspiron laptop. I recently saw about the 3.5" SATA to USB enclosure, so I went to check it. Strangely, when its placed in the enclosure, its not detecting in Windows. Also, when it was put as secondary (I'm guessing slave) to the shop fellow's desktop, it shows up in the BIOS and while starting, but then again doesn't show in Windows 7. The guy told me that I need to use a data recovery tool to get my data back. P.S. Whe WD hard drive doesnt have an OS, just data. So my question is: Can I slave the drive to my Dell laptop and try to recover the data, and if so how? I would really appreciate it any help, thanks in advance.

    Read the article

  • USB keyboard does not load after 13.10 upgrade

    - by Paul
    Problem: Running kernel 3.11.0-12-generic after a Ubuntu upgrade from 13.04 to 13.10 my USB keyboard is not recognised, thus I am not able to unlock my encrypted disk. I suspect it might be related to a minimal/incorrect install of initrd. Question: How do I go about getting the newest kernel to recognise my generic USB keyboard, allowing me to unlock my encrypted disk? What I have tried: I have already re-installed the newest kernel: sudo apt-get install --reinstall linux-image-generic linux-image and I have also updated the initrd: update-initramfs -c -k 3.11.0-12-generic Back story: I just completed upgrading my Ubuntu system from 13.04 to 13.10. When I subsequently rebooted by system I was no longer able to enter my encryption password (passphrase) as the keyboard drivers did not load. Temporary workaround: Earlier in the boot process (before the keyboard stops working) I was able to enter GRUB menu were I choose to boot from an older kernel (3.8.0-31-generic) which did load the USB keyboard drivers. This is currently the kernel I am running. Thanks

    Read the article

  • Installed Ubuntu using WUBI due to lack of CD Drive

    - by Chantelle
    I have installed 12.04 via WUBI because my computer does not have a CD Drive. Is there any way that I can delete Windows 7 from my computer and use the whole HD for Ubuntu? I ask this question because for one reason or another I cannot boot from a boot-able USB stick (either in Windows or Ubuntu, however the USB port works because I am able to use my cell phone's tethering plan using all the USB ports to connect to the Internet). Edit: Just found out the problem. Eee PC Model 1018p's do not boot from any format other than FAT and FAT16 and not FAT32.

    Read the article

  • Kernel Panic while Installing Ubuntu 12.10 from USB Drive

    - by user100889
    Good evening, I recently looked into installing Ubuntu alongside my Windows. I was able to mount the iso on a USB drive using Universal USB Installer. I verified it with the MD5sum utility and the hash is correct. When installing, I can get to the screen where I choose the boot order, select the USB drive, and then I get to a screen where Ubuntu seems to be 'loading' (purple background with Ubuntu logo and name in the middle). Then, all of a sudden, I get a "Kernel Panic - Not syncing: fatal exception in interrupt" error message. My specs : Intel Core 2 Duo CPU T5850 @ 2.16 GHz / 4 GB of ram / Packard Bell computer from 2007. / Windows 7 Ultimate x64 installed. What should I do now ? Thanks for your help.

    Read the article

  • Hard Drive problem: is it the SATA controller or the HDD itself?

    - by Drooling_Sheep
    I have a Samsung 1.5TB hard drive hooked up to an ECS H55H-I mini-ITX motherboard. I have XBMC 10 (modified Ubuntu 10.04) installed for use as an HTPC. The hard drive encounters occasional errors during normal use which cause it to be remounted read-only. I have updated the BIOS on the motherboard, changed the SATA cable and moved it to different ports on the motherboard, installed and re-installed the OS (including different versions of XBMC and generic ubuntu), all to no avail. I recently ran tests both with badblocks -sv and smartctl -t long. Both reported no errors. This makes me think the motherboard or SATA controller is probably the issue. Does anyone know of any further tests I can do to help narrow this down? The processor is a Core i3. I forget the model number but it's one of the 32nm ones with on-package graphics. There's no discrete video card or optical drive. The power supply is a 150W Rosewill (pretty sure) that came with the case.

    Read the article

  • How do I use a list of filenames to find a folder on my hard drive, that contains most matches of these filenames?

    - by Web Master
    I need a program that will use a list of file names to find a folder on my hard drive that contains the most of these filenames. Long story short I made a giant map. This map was live and got ruined. New map data files have been generated, and previous map data files have been altered. What does this mean? This means file sizes have been changed, and there will be new files that have never been in the backup folder. Some files map files could also have been generated in other projects. So there could be filenames on my computer not associated with this due to the way the files are named when created. So If I take an indidual file for example "r.-1.-1.mca" This file could show up on my hard drive 10 times. Anyway, the goal is to take 100 map files, turn them into a list, and then search the hard drive and find the folder that has the highest count of matching map file names. Can anyone figure out a way to do this? I am thinking about manually searching for every single file.

    Read the article

  • Firewire hard drive with Leopard install image won't boot from PPC Mac Mini

    - by GregH
    I have a Mac Mini (G4 - 1.25 GHz PowerPC) running osx 10.3.9. I want to upgrade it to 10.5 (Leopard). The problem is that I only have a CD and no DVD. After working through all of these issues, I got myself a firewire hard drive and both a 10.4 and 10.5 image that I could image on to the hard drive. I was able to successfully boot off the firewire drive with the 10.4 image. However, I am not able to boot off the firewire drive with the 10.5 image. When trying to boot under the 10.5 image I specify the firewire drive as the startup drive. However, it just boots to the internal (10.3) drive. Any idea why it won't boot to the 10.5 image?

    Read the article

  • XP Computer won't start (Missing/Corrupt 'System' file) - recently added new hard drive

    - by qwerty2
    Hi all, Pulling my hair out here. I recently replaced my D: 1TB drive (not a system drive) with a new 1.5TB drive. I loaded Windows XP, formatted the new drive and it was showing as working fine, alongside my C: windows system drive. I restart my machine and all of a sudden, Windows doesn't load and instead I get: "Windows could not start beause the following file is missing or corrupt" \WINDOWS\SYSTEM32\CONFIG\SYSTEM I don't have the original XP installation CD, although I do have another copy of XP, when I try and boot to it, I get the blue 'STOP' screen after it attempts to load the setup utlity for about a minute. Can someone please help? When I set up my new hard drive as a primary partition did this someone screw up my C: hard drive? Did it perhaps unmount it somehow? Any help would be fantastic. Thanks

    Read the article

  • XP Computer won't start (Missing/Corrupt 'System' file) - recently added new hard drive

    - by qwerty2
    Hi all, Pulling my hair out here. I recently replaced my D: 1TB drive (not a system drive) with a new 1.5TB drive. I loaded Windows XP, formatted the new drive and it was showing as working fine, alongside my C: windows system drive. I restart my machine and all of a sudden, Windows doesn't load and instead I get: "Windows could not start beause the following file is missing or corrupt" \WINDOWS\SYSTEM32\CONFIG\SYSTEM I don't have the original XP installation CD, although I do have another copy of XP, when I try and boot to it, I get the blue 'STOP' screen after it attempts to load the setup utlity for about a minute. Can someone please help? When I set up my new hard drive as a primary partition did this someone screw up my C: hard drive? Did it perhaps unmount it somehow? Any help would be fantastic. Thanks

    Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >