Search Results

Search found 14588 results on 584 pages for 'usb drive'.

Page 87/584 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

  • Hard drives (SATA/ATA) corrupting

    - by JC Denton
    Hello All, 2 years ago I bought relatives a new computer for christmas and installed Ubuntu on it. Ever since then it has been experiencing problems with the hard drives. The hard drive supplied with the machine was a SATA drive. When it appeared it was having problems (files and folders with invalid encoding started appearing) I replaced the SATA drive with the drive of their previous computer. I replaced it (The replacement) later on, the drive being rather old and thus becoming more prone to the risk of failure. The replacement drive is a IDE drive but the same problems started to appear (files and folders showing up in nautilus with invalid encoding). I fear the files and folders that are showing are existing FS entries, starting to corrupt. As it's happening to both the IDE and SATA drive it's unlikely to be the drives themselves or the IDE/SATA controller, I believe. Any ideas as to what could be causing the (assumed) corruption? EDIT: You're right about the paragraphs. They were there in edit mode but I'm still getting to grips with the whitespace format codes. The system is a "Primo Pro" AMD Phenom II X4 Quad Core 920 2.80GHz SILENT DDR2, ordered from overclockers.co.uk and nothing has been added to it except for the replacement of the SATA drive with an AMD drive. It would seem unlikely for a barebones system to be underpowered.

    Read the article

  • How to disable hiddev96 in linux (or tell it to ignore a specific device)

    - by Miky D
    I'm having problems with a CentOS 5.0 system when using a certain USB device. The problem is that the device advertises itself as a HID device and linux is happy to try to provide support for it: In /ver/log/messages I see a line that reads: hiddev96: USB HID 1.11 Device [KXX USB PRO] on usb-0000:00:1d.0-1 My question comes down to: Is there a way to tell linux to not use hiddev96 for that device in particular? If yes, how? If not, what are my options - can I turn hiddev96 off completely? UPDATE I should probably have been a bit more specific about what is going on. The machine is running Centos 5.0, and on top of it I'm running VMWare workstation with Windows XP - which is where the USB device is actually supposed to operate. All works fine for other USB devices (i.e. VMWare successfully connects the USB device to the guest OS and the OS can use it, but for this particular device VMWare connects it to the guest OS, but the OS can't read/write to it) Every attempt locks up the application that is trying to communicate with the device. I've reason to believe that it is because the device is a HID device and there's some contention between the Linux host and the Windows guest OS in accessing the device. Below is the output from modprobe -l|grep -i hid as requested by @Karolis: # modprobe -l | grep -i hid /lib/modules/2.6.18-53.1.14.el5/kernel/net/bluetooth/hidp/hidp.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetservo.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetkit.ko And here is the output of lsmod # lsmod Module Size Used by udf 76997 1 vboxdrv 65696 0 autofs4 24517 2 hidp 23105 2 rfcomm 42457 0 l2cap 29633 10 hidp,rfcomm tun 14657 0 vmnet 49980 16 vmblock 20512 3 vmmon 945236 0 sunrpc 144253 1 cpufreq_ondemand 10573 1 video 19269 0 sbs 18533 0 backlight 10049 0 i2c_ec 9025 1 sbs button 10705 0 battery 13637 0 asus_acpi 19289 0 ac 9157 0 ipv6 251393 27 lp 15849 0 snd_hda_intel 24025 2 snd_hda_codec 202689 1 snd_hda_intel snd_seq_dummy 7877 0 snd_seq_oss 32577 0 nvidia 7824032 31 snd_seq_midi_event 11073 1 snd_seq_oss snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 42945 0 snd_mixer_oss 19009 1 snd_pcm_oss snd_pcm 72133 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss joydev 13313 0 sg 36061 0 parport_pc 29157 1 snd_timer 24645 2 snd_seq,snd_pcm snd 52421 13 snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer ndiswrapper 170384 0 parport 37513 2 lp,parport_pc hci_usb 20317 2 ide_cd 40033 1 tg3 104389 0 i2c_i801 11469 0 bluetooth 53925 8 hidp,rfcomm,l2cap,hci_usb soundcore 11553 1 snd cdrom 36705 1 ide_cd serio_raw 10693 0 snd_page_alloc 14281 2 snd_hda_intel,snd_pcm i2c_core 23745 3 i2c_ec,nvidia,i2c_i801 pcspkr 7105 0 dm_snapshot 20709 0 dm_zero 6209 0 dm_mirror 28741 0 dm_mod 58201 8 dm_snapshot,dm_zero,dm_mirror ahci 23621 4 libata 115833 1 ahci sd_mod 24897 5 scsi_mod 132685 3 sg,libata,sd_mod ext3 123337 3 jbd 56553 1 ext3 ehci_hcd 32973 0 ohci_hcd 23261 0 uhci_hcd 25421 0

    Read the article

  • How can I determine the sector size on an external hard drive?

    - by sigint
    Hard drives are transitioning from 512 byte to 4096 byte sector sizes, and it looks like Windows XP won't support these newer drives without additional software (such as WDalign from Western Digital) My question is: how does this affect external hard drives? I'll be buying a 1TB USB external drive, and it'll be plugged into a mix of Windows 7 and XP machines. Is there an easy way to tell what the sector size on an external hard drive is?

    Read the article

  • How I can determine the sector size on an external hard drive?

    - by sigint
    Hard drives are transitioning from 512 byte to 4096 byte sector sizes, and it looks like Windows XP won't support these newer drives without additional software (such as WDalign from Western Digital) My question is: how does this affect external hard drives? I'll be buying a 1TB USB external drive, and it'll be plugged into a mix of Windows 7 and XP machines. Is there an easy way to tell what the sector size on an external hard drive is?

    Read the article

  • Windows 7 randomly installs an "Unknown Device"

    - by Amazed
    Rarely (several days to weeks between occurrences,) and seemingly at random, I get a balloon notification from Windows 7 (x64 SP1 Home Premium) that it is installing hardware for me. However, no new hardware has been installed or plugged in! When I click the balloon it doesn't give me any useful information: Looking in the event log, I find this entry: Event ID: 20001 Source: UserPnp Task Category: 7005 Message: Driver Management concluded the process to install driver FileRepository\usb.inf_amd64_neutral_153b489118ee37b8\usb.inf for Device Instance ID USB\VID_0000&PID_0000\6&3AF9A177&0&0060&&02 with the following status: 0x0. It appears to be USB related. My motherboard has both USB 2.0 and 3.0 controllers. My keyboard and mouse are plugged into the 2.0 slots and the data/recharge cable for a tablet (but not the tablet itself) was plugged in to the 3.0 slot. No other USB devices have been attached for several days/reboots. Why is Windows doing this?

    Read the article

  • Error- D:\ is not accessible. Access is denied

    - by Aaron
    All of the sudden the D drive gives me an error when I try to open it: D:\ is not accessible. Access is denied. I have files on the drive that I would like to recover, so I do not want to reformat the drive. It acts almost like the computer doesn't recognize the drive. I have a feeling it's something with security settings, I may have accidentally changed something on the drive. I'm running on a Acer Aspire laptop on Windows Vista, SP2. I beleive both the C and the D drive run off of the same disk drive. At least that's all the Device Manager shows. So correct me if I'm wrong, but that would make it a partitioned drive.

    Read the article

  • How do I transfer a Windows 7 installation to a new HDD?

    - by Nidonocu
    I've just got all the parts I need to build a new PC but the SATAII hard drive I ordered did not come and I've received an IDE drive instead. While I wait to get the correct drive type and send the new IDE drive back, is it possible to install Windows 7 on to an existing IDE drive that I have and then transfer the contents of that drive over to the new SATA disk when it arrives without Windows having any issues?

    Read the article

  • How full is too full for mechanical hard drives?

    - by Sunny Molini
    I have heard many claim that it doesn't matter how full a drive is until it starts cutting into temp and virtual memory space. This doesn't make sense to me, given the nature of how the data is transacted on a hard drive. The inside of the platter presents less data per revolution than the outside of the drive does, by significant factors. The inside 40% of the radius of full size hard drive is used for the spindle, so only the outside 60% is used for data storage, but that still means that the inside track of a hard drive presents data 60% slower than the outside track. By my calculation, a Hard drive that is only 10% full should perform about 2.25 times faster than a hard drive that is 90% full, assuming that the flow is constrained by other factors. Am I wildly off base here? For all the drives I know, even the top speeds of the first 1% of the drive would be well within the bandwidth provided by a SATA 2 connection.

    Read the article

  • Installing FreeNAS 8.3 problems

    - by osij2is
    I'm trying to install FreeNAS 8.3 on some desktop-level hardware (AMD Phenom + 890FX + 16GB) and I've been unsuccessful. I initially tried using a USB stick and followed the instructions on the FreeNAS site here. Making the USB was simple as the instructions laid out, but as soon as the USB is detected (during the boot process) some text appears and quickly vanishes and my machine reboots infinitely. After trying several different was to make the USB, I tried using a DVD-ROM but again, I had the same issue as the USB stick. This leads me to conclude that either a BIOS setting is incorrect but I have no idea which one. I've changed the BIOS to not "fast" boot per se, and I've correctly configured the boot order per USB stick and the DVD-ROM drive so I know that it's working. Have I missed anything that might be causing this problem? I'm not a FreeBSD/FreeNAS expert by any means.

    Read the article

  • How can I determine the sector size on an external hard drive?

    - by sigint
    Hard drives are transitioning from 512 byte to 4096 byte sector sizes, and it looks like Windows XP won't support these newer drives without additional software (such as WDalign from Western Digital) My question is: how does this affect external hard drives? I'll be buying a 1TB USB external drive, and it'll be plugged into a mix of Windows 7 and XP machines. Is there an easy way to tell what the sector size on an external hard drive is?

    Read the article

  • Can WD3200AZRX SATA-3 hard drive work on SATA-2?

    - by Roberts
    I know this question is already been asked a lot of times. I am buying new hard drive today, but I am worrying that it wont work on my motherboard Gigabyte GA-945PL-S3. I want to buy this hard drive. It's pretty expensive and I don't want to get dissapointed. I can't find any documentation about jumper settings and that's why I am asking this question in this site, I hope somebody helps me. Have a nice day!

    Read the article

  • Installing Chrome OS on HP Pavilion

    - by Lenny K
    Trying to install Chrome OS on HP Pavillion tx1000. I changed the BIOS to boot from USB before hard drive, and created a bootable USB drive (SanDisk Cruzer 4GB). No matter how many ways I try to make the USB drive, the laptop hangs on the startup screen, and trying to open the Boot Order Options freezes on "Fixed disk 0: ...". On the other hand, without the USB plugged in, the computer continues, and displays "Initialized Mouse", and then onto the Boot Order Options. If you let it boot normally from the beginning, it starts up fine into Windows Vista. I am using Hexxeh's Chrome OS build. Here are the different methods I've tried for making the Bootable USB Drive: Hexxeh's Image Creator (for Mac) Making the USB device bootable (using these directions). I wrote the image using Win32DiskImager. Writing the image using Win32DiskImager (without making it bootable).

    Read the article

  • Performance boost for MacBook: Hybrid hard drive or 4GB RAM?

    - by user13572
    I have an aluminium 13" MacBook with 2GB or RAM and 5400RPM 500GB hard drive. The main tasks I perform are developing iPhone and Mac apps in Xcode and websites in Coda. I want to improve the performance so I am considering buying 4GB of RAM or a 500GB Seagate solid-state hybrid drive. What is likely to provide the biggest performance boost?

    Read the article

  • Does having your page file on decrease the life expectancy of your hard drive?

    - by user695874
    If I have my page file turned on in Windows as opposed to having it turned off as shown below: Would having the page file turned on decrease the life expectancy on my Hard Drive? If so, how much would the life decrease say with regular use? (4 hours a day) I'm thinking it would decrease some just because there would be more writing to the hard drive, but I wasn't sure if it would be too negligible to even matter.

    Read the article

  • How do I change the space I allocated to my virtual hard drive in VirtualBox?

    - by Guest
    Hi, I have a Win7 x64 virtual machine running inside VirtualBox. When I first setup the system I gave the virtual hard drive 20gb of space to work with, but I also set it to dynamically expand (or so I thought). Unfortunately I ran out of space and the drive is not expanding/changing.. and I can't find a way to alter the size of it. Is there anything I can do in this situation. Thanks in advance.

    Read the article

  • Performance boast for MacBook: Hybrid hard drive or 4GB RAM?

    - by user13572
    I have an aluminium 13" MacBook with 2GB or RAM and 5400RPM 500GB hard drive. The main tasks I perform are developing iPhone and Mac apps in Xcode and websites in Coda. I want to improve the performance so I am considering buying 4GB of RAM or a 500GB Seagate solid-state hybrid drive. What is likely to provide the biggest performance boast?

    Read the article

  • Hard drive not being recognised after booting into Windows?

    - by Sam152
    I just got myself an internal Western Digital caviar black 1TB hard drive. I installed it without too much trouble. The SATA's are plugged correctly and the bios is recognizing it, but it doesn't show up in Windows 7. Does anyone have any troubleshooting ideas or tips I can step through to try and make Windows see my new drive?

    Read the article

  • Try out ubuntu on thinkpad x40 (via usb)?

    - by Oliver
    I am trying to try out ubuntu (i,e, install it within windows) on my thinkpad x40. I followed the instructions on how to create a bootable usb (http://www.ubuntu.com/download/ubuntu/download). No problem. The issue I have now is that th eusb ports on my x40 were burned before (common problem with the machine), i.e. do not work. So I got a USB notebook card from belkin. However it does not seem to recognize the usb stick from bios, thus I cannot boot from it. I also do not have a cd rom. Then tried to run wubi from the usb stick, briefly appears in task manager, no further action. So I tried it with wubi.exe, but same thing. Downloaded it to desktop, run it, briefly appears in the task manager under processes, no further action. Any one idea? I have enough memory and enough freed hd space. Thanks. Oliver

    Read the article

  • How to safely remove a USB device from 2008 Core server?

    - by Qwerty
    I have a Hyper-V Core server 2008 that I administer via command line and remote tools. We have now got a new backup system in place and it involves me connecting an External USB drive (G:) to backup system state files. My question is how should I safely remove the drive for its weekly offsite swap? I've tried using the devcon tool however it just says the 'removal failed with no devices removed' with no other explanation. I have noticed that there isnt a readily available x64 version of devcon and that might be the cause of the problem. (I have read of people downloading a amd64 version but I have not located it myself, if someone knows where it is please let me know). The devcon command worked on my old 2003 x86 server with the command: devcon remove *3200AVJ_EXTERNAL* I have also looked at using fsutil volume dismount g: but it doesn't seem to work as G: is still listed as a connected volume. I have checked that the volume is not in use via remote tools and the net file command. Both show no open files in the G:\ volume. This could be a decent substitute as it might be used to flush any remaining IO to the volume can anyone clarify? Thanks in advance.

    Read the article

  • How do I remove a USB drive's write protection?

    - by nate
    I have a SanDisk Cruser Blade USB stick that suddenly seems to be write protected. I tried running DiskPart but after I write the command "attributes disk clear readonly" it displays this: Microsoft DiskPart version 5.1.3565 ADD - Add a mirror to a simple volume. ACTIVE - Marks the current basic partition as an active boot partition. ASSIGN - Assign a drive letter or mount point to the selected volume. BREAK - Break a mirror set. CLEAN - Clear the configuration information, or all information, off the disk. CONVERT - Converts between different disk formats. CREATE - Create a volume or partition. DELETE - Delete an object. DETAIL - Provide details about an object. EXIT - Exit DiskPart EXTEND - Extend a volume. HELP - Prints a list of commands. IMPORT - Imports a disk group. LIST - Prints out a list of objects. INACTIVE - Marks the current basic partition as an inactive partition. ONLINE - Online a disk that is currently marked as offline. REM - Does nothing. Used to comment scripts. REMOVE - Remove a drive letter or mount point assignment. REPAIR - Repair a RAID-5 volume. RESCAN - Rescan the computer looking for disks and volumes. RETAIN - Place a retainer partition under a simple volume. SELECT - Move the focus to an object. It's like when you type help at the DiskPart prompt, so how do I get past this? This problem started when I plugged the stick into a laptop which had viruses, if that's any help.

    Read the article

  • Grub hangs at "Starting up ..." when USB flash card reader is plugged in (on Ubuntu Hardy)

    - by Laurence Gonsalves
    I have a PC with Ubuntu Hardy installed. The machine boots fine unless my USB flash card reader (one of those N-in-1 readers by MediaGear) is plugged in at startup. If the reader is plugged in, the boot process proceeds as normal until it gets to the screen that says "Starting up ...". At that point it just hangs forever. To work around this I currently leave the reader unplugged when booting, and then plug it back in after I see that Ubuntu is actually starting. This is annoying though, especially when I reboot the machine (typically for updates), forget to unplug the reader, and walk away only to come back hours later to find the machine hung. My guess is that the presence of the reader is confusing Grub about where to find the kernel. The weird thing is that Grub is on the same drive as the kernel I want it to boot so clearly the drive is still readable even when the flash card reader is plugged in. Is there some way I can tell Grub to never go looking on the flash card reader?

    Read the article

  • Which file system to use for portable hard drive shared among different operating systems?

    - by Jonathon Watney
    Something similar has been asked already but my criteria is a little different. I need to share a portable hard drive (USB/Firewire) between Mac OSX, Linux and Windows XP systems where the files being shared are sometimes 4GB. Is there a file system that is available out of the box on all these operating systems that support this and allows read/write access? If not, what's the next best solution in terms of installing additional software on these operating systems?

    Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >