Search Results

Search found 709 results on 29 pages for 'charles forest'.

Page 9/29 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • Server 2003 Remote Desktop loses its virtual printer image of the local printer

    - by Charles Hart
    Server 2003 Remote Desktop provides service to stores served by several ISPs. The server loses its virtual printer image of the local printer (as seen from the remote store site) and a copy of the original local printer appears on the local computer with a different driver without notice. Specifically: A remote desktop session is opened on a local computer that has a Brother HL2140 USB printer connected and the associated software installed with a correct driver shown under the “advanced” button. The server has the same Brother software and driver. An application that is running on the server attempts to print on the local printer connected to the local computer running Vista Pro or XP Pro. Either it works correctly (Good) or it does not print (Bad) or it prints on another Local Printer connected to another local computer logged into the server (Bad and Odd). When it doesn’t print (or prints somewhere else) we ask the customer to look for the (virtual) printer using the Remote desktop view of the server and the printer is gone. Then we ask the customer to look at the printers folder in the local computer. There are several possibilities: The printer is there, but the driver is mysteriously changed in the drop down to MDX something; we have the customer select the other (proper) Brother driver, and all is well again, as now after the change, the virtual printer in the server (which now matches the local printer) appears again, and so printing can resume. A “copy” of the printer mysteriously appears in the local printer’s folder and after we delete it the virtual printer in the server appears again and so printing can resume. Note that in both case 1 and 2, the server sometimes sends the print job elsewhere, to some other local computer. Meanwhile in the log file, endless errors are reported and the server eventually crashes, sometimes twice a day. I’m puzzled what changes the local printer driver and I’m puzzled what loads the copy 2 or copy 3 of the printer in the local printer folder. This entire description randomly occurs on any of 40+ local computers in eight different locations in different ISPs, all sharing one Domain.

    Read the article

  • Lookup Active Directory entry by implicit UPN

    - by Michael-O
    In our company exists a forest-wide UPN suffix company.com and almost all user accounts have the explicit UPN set to [email protected]. This value is also set in the Active Directory userPrincipalName attribute. Now we have an application where users perform authentication through Kerberos. So we are given the Kerberos principal, i.e. implicit UPN. We'd like to look up that user and retrieve several LDAP attributes. Since iUPN and userPrincipalName do not match anymore, the lookup is not possible. Is there any "official" way to retrieve a mapping from the Active Direcory? My workaround is to perform a LDAP bind against the realm component and search for the sAMAccountName attribute which matches the user id component of the iUPN. Searching for the mere sAMAccountName in the forest is not possible because the value is unique in the domain only.

    Read the article

  • Enabled Apache mod_status but server-status was not found on SUSE enterprise 11 SP1

    - by Charles Yeung
    In /etc/apache2/httpd.conf, I have remove the line of Include mod_status and add the following to the last line, LoadModule status_module /usr/lib/apache2/mod_status.so ExtendedStatus On <Location /server-status> SetHandler server-status AllowOverride None Order Deny,Allow Deny from all Allow from all </Location> Then I restart Apache, and go to http://HOSTNAME/server-status, but I get the page not found, Did someone know why I get page not found? Is there any more step needed to do to see the Apache status? Thanks

    Read the article

  • Extract MP3 URL from a SWF file

    - by Charles
    I have a SWF file that basically shows a streamer, and it plays a song (I'm guessing it's MP3) that it links to, somewhere. I know the audio isn't embedded in the file since the SWF's file size is ~370KB. With most flash FLV and MP3 players, Internet Download Manager catches the URL as soon as the video/audio starts to load, and I can easily download it using IDM. In this case, IDM doesn't seem to sense anything - so I thought maybe I could extract the MP3 location myself. I tried decompiling the SWF file, as I'd heard before that with some files, decompiling can help in breaking down a file and getting just the info you need - but I honestly don't know what to look for in this particular file. Suggestions?

    Read the article

  • Spawned Process Terminated in GP Startup Script

    - by Charles Gargent
    I have a Group Policy Startup Script which runs synchronously. I now need this script to run one process asynchronously. So far I have managed to get the spawned process running via the command below, however once the rest of the script finishes and the GP Startup Script "phase" finishes and the logon prompt is shown, my spawned process is terminated. Is there any way to have this process continue beyond the Startup Script phase? cmd /c start spawned.bat I guess the reason why it terminates is because the process was launched by the Startup Script process and when the parent process terminates so do its children. PS I need it to be launched via the exisitng script.

    Read the article

  • How does one check whether the OS X "disabled" flag for launchd services is set?

    - by Charles Duffy
    According to the man page for launchctl (emphasis mine):    -w   Overrides the Disabled key and sets it to false. In previous versions, this option would modify the configuration file. Now the state of the Disabled key is stored elsewhere on-disk. Because the current state of the disabled flag is no longer set in the .plist file itself, checking for the Disabled key is no longer an accurate way to tell if the service will run on next boot. Where is this "elsewhere on-disk"? More to the point (and more importantly), how does one check whether this flag is set? Also, is it possible to set a service to run on next boot without forcing it to start immediately (as with launchctl load -w /Library/LaunchDaemons/my-service.plist)?

    Read the article

  • Apache and Virtual Hosts Problem on OS X

    - by Charles Chadwick
    I recently formatted and installed my iMac. I am running 10.6.5. Prior to this format, I had the default Apache web server up and running with several virtual hosts, and everything ran beautifully. After formatting, I set everything back up again, and now Apache is acting funny. Here is a description of what I have going on. My default root directory for the Apache Web server is pointed to an external hard drive. In my httpd.conf, here is what I have: DocumentRoot "/Storage/Sites" Then a few lines beneath that: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> And then beneath that: <Directory "/Storage/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from All </Directory> At the end of this file, I have commented out the user dir include conf file: Include /private/etc/apache2/extra/httpd-userdir.conf And uncommented the virtual hosts conf file: Include /private/etc/apache2/extra/httpd-vhosts.conf Moving on, I have the following entry in my vhosts file: <VirtualHost *:80> DocumentRoot "/Storage/Sites/mysite" ServerName mysite.dev </VirtualHost> I also have a host record in my /etc/hosts file that points mysite.dev to 127.0.0.1 (I also tried using my router IP, 192.168.1.2). The problem I am coming across is, despite having PHP files in /Storage/Sites/mysite, the server is still looking at /Storage/Sites. I know this because in the DocumentRoot contains a php file with phpinfo() (whereas the index.php file in mysite has different code). I have tried setting up other virtual hosts, but they are still doing the same thing. Also, "NameVirtualHost *:80" is in my vhosts file. I saw as a solution on another thread here. Doesn't seem to make a difference. Any ideas on this? Let me know if this is not enough information.

    Read the article

  • Modifying the initrd.img to run additional binaries in a PXE booted RHEL 6

    - by Charles Long
    I am trying to add additional automation to our existing RHEL 6 (or Oralce's implementation thereof) PXE install process by running a script in the %pre section of my kickstart config that call hpacucli, HP's raid device configuration binary. My approach has been to modify the PXE served initrd.img. I've unpacked the initrd.img and copied in the required libraries, binaries, and scripts but when the system boots using the modified initrd.img, the modified /lib (and /lib_64) are moved aside to /lib_old and /lib is linked to the /mnt/runtime/lib. How can I change this configuration so that the /lib is not moved (unlikely) or required libraries are available in the runtime /mnt/runtime/lib? To test and confirm this I've been able to get the install process to move to the 6th virtual console, which allows me to see errors, and then open a shell (a useful debugging mechanism). %pre exec /dev/tty6 2 /dev/tty6 chvt 6 /bin/sh

    Read the article

  • CMAK Custom Action to run synchronous executable

    - by Charles Gargent
    I am using the Connection Manager Administration Kit (CMAK) to create vpn connections for my users, if it is possible how do I create a custom action that launches an executable that runs synchronously? In the help file it says Only DLLs run synchronously, meaning that Connection Manager starts the action and then waits for the function to return before continuing Is there any way around this? I have seen something similar called VPN-Q which from the screen shots appear to do just that.

    Read the article

  • Windows Server 2003 - passwordless access to \\myhost\ but not \\myhost.mydomain.net\

    - by Charles Duffy
    I have a Windows Server 2003 system on which passwordless access to local UNC paths is possible using the server's unqualified hostname or its IP address, but not via its FQDN -- even when the hosts file is used to map that FQDN directly to 127.0.0.1. That is: \\127.0.0.1\ - passwordless \\myhost\ - passwordless \\myhost.mydomain.com\ - brings up an authentication dialog Unfortunately, I have a local application trying to resolve UNC paths including the host's FQDN. I've tried resolving myhost.mydomain.com to 127.0.0.1 in both hosts and lmhosts, and calling ping myhost.mydomain.com at the command prompt gives the appearance that this resolution has taken effect; even so, attempting to open \\myhost.mydomain.com\ from Windows Explorer brings up a password prompt, while \\127.0.0.1\ does not. The system is using an OpenDirectory server (Apple's Kerberos+LDAP directory service) for authentication.

    Read the article

  • Looking for new hosting company

    - by Charles Chadwick
    I am currently looking for a new hosting company for my business. We are a design and development company and have been recommending WestHost to our clients for the last several years. However due to some changes they have implemented in the last year, we have decided to start referring people elsewhere. Most of our clients need affordable Linux hosting with the basics. SSH is also a definite must and 24/7 support (preferably phone, as well as email/ticket system) that won't cost extra. An easy to use and understand control panel would be nice as well. I have heard good things about HostGator, and am wondering if anyone has experience with them. The prices seem right and they have everything we need. We are also thinking of purchasing a dedicated server with them for a specific project that's going to require one. I don't know if I am asking this in the right place, if this is not welcome here please let me know.

    Read the article

  • SQL Server performance on VSphere 4.0

    - by Charles
    We are having a performance issue that we cannot explain with our VMWare environment and I am hoping someone here may be able to help. We have a web application that uses a databases backend. We have an SQL 2005 Cluster setup on Windows 2003 R2 between a physical node and a virtual node. Both physical servers are identical 2950's with 2x Xeaon x5460 Quad Core CPUs and 64GB of memory, 16GB allocated to the OS. We are utilizing an iSCSI San for all cluster disks. The problem is this, when utilizing the application under a repeated stress testing that adds CPUs to the cluster nodes, the Physical node scales from 1 pCPU to 8 pCPUs, meaning we see continued performance increases. When testing the node running Vsphere, we have the expected 12% performance hit for being virtual but we still scale from 1 vCPU to 4 vCPUs like the physical but beyond this performance drops off, by the time we get to 8 vCPUs we are seeing performance numbers worse than at 4 vCPUs. Again, both nodes are configured identically in terms of hardware, Guest OS, SQL Configurations etc and there is no traffic other than the testing on the system. There are no other VMs on the virtual server so there should be no competition for resources. We have contacted VMWare for help but they have not really been any suggesting things like setting SQL Processor Affinity which, while being helpful would have the same net effect on each box and should not change our results in the least. We have looked at all of VMWare's SQL Tuning guides with regards to VSphere with no benefit, please help!

    Read the article

  • SQL Server Read Locking behavior

    - by Charles Bretana
    When SQL Server Books online says that "Shared (S) locks on a resource are released as soon as the read operation completes, unless the transaction isolation level is set to repeatable read or higher, or a locking hint is used to retain the shared (S) locks for the duration of the transaction." Assuming we're talking about a row-level lock, with no explicit transaction, at default isolation level (Read Committed), what does "read operation" refer to? The reading of a single row of data? The reading of a single 8k IO Page ? or until the the complete Select statement in which the lock was created has finished executing, no matter how many other rows are involved? NOTE: The reason I need to know this is we have a several second read-only select statement generated by a data layer web service, which creates page-level shared read locks, generating a deadlock due to conflicting with row-level exclusive update locks from a replication prcoess that keeps the server updated. The select statement is fairly large, with many sub-selects, and one DBA is proposing that we rewrite it to break it up into multiple smaller statements (shorter running pieces), "to cut down on how long the locks are held". As this assumes that the shared read locks are held till the complete select statement has finished, if that is wrong (if locks are released when the row, or the page is read) then that approach would have no effect whatsoever....

    Read the article

  • No Games Installed with Windows 7 Professional

    - by Charles Didier
    Ordered a PC from HP with Windows 7 Professional 64-bit preinstalled, of course. No Win7 disc was included with computer. There are no games installed. I have tried to "activate" them through the Control Panel procedure, but each time I do it there is an error message telling me that not all components installed. And my Games folder is empty. Is there a solution? Synetech asked what I meant by "activate through Control Panel." I'm referring to the "Turn windows features on" procedure that's supposed to work for everybody. I'm sure it does for most, but it didn't for me.

    Read the article

  • Copy filename to clipboard

    - by Charles Roper
    I am looking for a Windows utility that can copy the currently selected filename, including the path, to the clipboard, ideally through the right-click menu. Some degree of flexibility would be useful, like the ability to copy just the filename, path+filename, filename minus extension, etc. This isn't essential, though, as long as it can copy the path+filename. Must be compatible with XP, Vista and Win7. Free and/or open source would be ideal. Thanks!

    Read the article

  • Moved servers running Windows Server 2003

    - by Charles
    Our company has two locations and each location has a Windows Server 2003 machine as the DC and several servers, running on two different sub-nets. We are consolidating the locations. I changed the IP address on one of the web servers prior to moving to the main location. I didn't change the IP address on either the DC or the other web servers prior to moving to the main location. Now, only the web server whose IP was changed is able to serve pages. The other web servers are not able to serve pages, cannot be pinged, or be accessed via RDP. Since we don't need the second DC, it has been powered down. When I tried to ping it, the previous IP address was received. My colleague changed the IP address in the DC's DNS, but when I ping it, a timeout error is received. I know that I should have read a lot more before doing this. What can I do to fix it? Thanks, in advance, for your help! Update MarkM, thanks for the info on demoting a DC. That's one of the things I want to do after everything is working. Is there a good, clear article you recommend? Rusty, there are no DMZs involved at this point. I need to set up a DMZ, but that's another project.

    Read the article

  • Why do we still have to use drive letters to identify file systems?

    - by Charles E. Grant
    A friend has run into a problem where they installed Windows 7 from an external drive, and the internal boot drive is now assigned to H:. Theoretically this shouldn't cause problems because there are programming interfaces for getting the drive letter for the system drive. In practice though, there are quite a few programs that assume that C: is the only possible location for the system directories, and they refuse to run with the system directories on H:. That's not Microsoft's fault, but it's a pain none-the-less. The general consensus seems to be that a re-install, setting the internal boot drive to C:, is the only way to avoid fix these problems. UNIX-like systems display all file systems in a single unified directory tree and mostly seem to avoid problems like this. Is it possible to configure a Windows system without reference to drive letters, or does the importance of backwards compatibility mean that Windows will be working with drive letters from now until doomsday?

    Read the article

  • In Mail.app, move the reply to the original email's folder?

    - by Charles Brossollet
    As many, I find it handy to have emails organized by folders, but I don't like the fact that sent mails are in a separate folder. My idea would be that when I answer to an email that is already in a folder, the answer is placed automatically in that same folder. Is there a script or a plugin to do this in Mail.app? The corresponding add-on for thunderbird is Copy sent to current

    Read the article

  • Defining a persistent static route on Mac OS X

    - by Charles Duffy
    How does one define a static route on MacOS X which persists through reboots? The only suggestion I've found on Google advises setting up a launchd service to run at boot, which seems like a horrible hack (does it survive a network restart without rebooting, for instance?) To set up the route I need temporarily, I can run the following: route add -net ${network} ${gateway} ${netmask} How would I make this persist?

    Read the article

  • Configure static IPv6 on Ubuntu

    - by Charles Offenbacher
    I'm trying to configure IPv6 on a dedicated Ubuntu server. My provider gave me a "/64" (whatever that is - I'm still confused) of IPv6 addresses. However, when I try to use them, I can't ping anything. What do I do? :( # ping6 ipv6.google.com PING ipv6.google.com(vx-in-x63.1e100.net) 56 data bytes From fe80::219:d1ff:fefb:42d8 icmp_seq=1 Destination unreachable: Address unreachable From fe80::219:d1ff:fefb:42d8 icmp_seq=2 Destination unreachable: Address unreachable From fe80::219:d1ff:fefb:42d8 icmp_seq=3 Destination unreachable: Address unreachable --- ipv6.google.com ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2014ms # tracepath6 ipv6.google.com 1?: [LOCALHOST] 0.025ms pmtu 1500 1: fe80::219:d1ff:fefb:42d8%eth0 2000.022ms !H Resume: pmtu 1500 # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 64.***.***.*** netmask 255.255.255.248 gateway 64.***.***.*** iface eth0 inet6 static pre-up modprobe ipv6 address 2607:F878:1:***::1 netmask 64 gateway 2607:F878:1:***(same as address)::1 # ifconfig eth0 Link encap:Ethernet HWaddr 00:19:d1:fb:42:d8 inet addr:64.***.***.*** Bcast:64.***.***.*** Mask:255.255.255.248 inet6 addr: fe80::219:d1ff:fefb:42d8/64 Scope:Link inet6 addr: 2607:f878:1:***::1/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:52451 errors:0 dropped:0 overruns:0 frame:0 TX packets:39729 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6817761 (6.8 MB) TX bytes:6153835 (6.1 MB) Interrupt:41 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:166 errors:0 dropped:0 overruns:0 frame:0 TX packets:166 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:31714 (31.7 KB) TX bytes:31714 (31.7 KB)

    Read the article

  • Remote access to phpmyadmin from computer belongs to same LAN

    - by Charles
    OK... I solved it. It is because I have not configured the httpd.conf to allow the centos listen port 80 and 8080. Listen 80 Listen 8080 I have setup the myphpadmin on my CentOS 6.4 recently. I can access and login to the myphpadmin on my localhost. However, when I type http://[hostipaddr]/phpmyadmin on my other computer in the same LAN with the CentOS, the browser simply cannot access the page. Below are some of the current configuration. Anyone can help please......? config.inc.php $i++; /* Authentication type */ $cfg['Servers'][$i]['auth_type'] = 'http'; /* Server parameters */ $cfg['Servers'][$i]['host'] = 'localhost'; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['compress'] = false; /* Select mysql if your server does not have mysqli */ $cfg['Servers'][$i]['extension'] = 'mysql'; $cfg['Servers'][$i]['AllowNoPassword'] = false; phpmyadmin.conf <Directory /var/www/html/phpmyadmin/> order allow,deny allow from all </Directory> Furthermore, I can access the webpage that stored in the CentOS from my other computer without problems. After using wireshark and tcpdump, I found that the server (the Cent OS) keep resetting the connection. (192.168.1.106 is my other computer, 192.168.1.101 is my CentOS) 23:29:42.281473 IP 192.168.1.106.55999 > 192.168.1.101.webcache: Flags [S], seq 2559409090, win 65535, options [mss 1460,nop,wscale 8,nop,nop,sackOK], length 0 23:29:42.281504 IP 192.168.1.101.webcache > 192.168.1.106.55999: Flags [R.], seq 0, ack 2559409091, win 0, length 0 I have disabled the iptables service on the CentOS already.

    Read the article

  • Setting up /etc/network/interface file for KVM ubuntu 10.10

    - by Charles Thornton
    I am trying to setup KVM on Unbuntu 10.10 IFCONFIG DUMP: hydra(~}$ifconfig eth0 Link encap:Ethernet HWaddr 00:1b:fc:cb:77:eb inet addr:172.20.20.3 Bcast:172.20.20.255 Mask:255.255.255.0 inet6 addr: fe80::21b:fcff:fecb:77eb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1345 errors:0 dropped:0 overruns:0 frame:0 TX packets:1541 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:820414 (820.4 KB) TX bytes:317708 (317.7 KB) Interrupt:23 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) virbr0 Link encap:Ethernet HWaddr 0a:1e:fb:b4:77:84 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 inet6 addr: fe80::81e:fbff:feb4:7784/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:56 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:8934 (8.9 KB) hydra(~}$ QUESTION:: How should /etc/network/interfaces be setup?? The following attempt just kills my internet connection! --------- /etc/network/interfaces ------------- # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 172.20.20.3 netmask 255.255.255.0 network 172.20.20.0 broadcast 172.20.20.255 gateway 172.20.20.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off What am I doing wrong????

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >