Search Results

Search found 60432 results on 2418 pages for 'compilation time'.

Page 9/2418 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • Viability of Mac OS X 10.9 Time Machine Server in office environment

    - by user197609
    Currently we have about 20 Mac OS 10.9 MacBook Pros (almost all with SSDs) backing up to individual USB drives. I'd like to consolidate these to one drobo thunderbolt drive array attached to a Mac Mini server (running 10.9 server) using time machine server. My question is, will this scale to 20 users? Examples I have seen seem to be 5 or 6 users tops, and this isn't easy for me to test (I'd rather not ask everyone to backup to the array and then switch back to USB drives if it brings our network to its knees). My primary concern is saturating our gigabit network, as time machine backs up every hour for every machine, so there would usually be a couple people backing up at any given time. We also have some people occasionally on our 802.11ac network and not on ethernet (usually connected via 802.11n until people upgrade to newer machines), but most of the time people are connected to our thunderbolt displays which have a gigabit ethernet connection on them. Our network topology is one 32 port gigabit switch with 5 smaller gigabit switches at each desk cluster. The mac mini server is connected directly to the top level switch. Update: Failing information from someone who has done this in practice, I suppose my question is really around how switches work. If three or four people are backing up simultaneously, and then other two (different) users transfer a file between each other, will they be able to transfer the file at gigabit speeds?

    Read the article

  • How to use PHP Time function to set a time variable of '09:30', add a specific amount of seconds and

    - by Henry
    Hi guys, hopefully you can help me here. I have some code (please see below) which takes the current time, then adds specific seconds to the time and re-displays the time 1 minute in the future. Instead of the time being the current time, I want it to be a time which I set - say 9:30. Then I want to be able to add, for example 65 seconds and it shows me 9:31. Please can you show me how to change it from current time, to a specific time I can set myself. Thank you. <?php $my_time = date('h:i:s',time()); $seconds2add = 65; $new_time= strtotime($my_time); $new_time+=$seconds2add; echo date('h:i:s',$new_time); ?>

    Read the article

  • Time Machine (OSX) doesn't back up files in Mount Point or Disk Image File

    - by Chris
    I found this Q&A (http://superuser.com/questions/148849/backup-mounted-drive-of-an-image-in-time-machine) and this prompted me to ask the following question: I have two disk images which are scripted to be mounted on login. These two disk images are always mounted to the same location. These two disk images are encrypted TrueCrypt volumes. Time Machine (TM) will only back up the disk images the first time they are mounted, but not after that. As I modify documents within the volumes throughout the day, the modified timestamps are adjusted properly. However, TM does not back them up. TM never backs up the mount points which are two folders within my home directory. Any ideas as to why neither the mount point or the image files are backed up? Do the image files have to be closed (unmounted) after being modified for TM to back them up? Thanks, Chris

    Read the article

  • Users in the field and Time Machine

    - by Bart Silverstrim
    We have several users in the field with MacBooks. Because they're not always on the network, they save files locally to their notebooks. Normally I back things up by making quick copies to other media, but with the Macs they have the option to run Time Machine (and the way OS X is designed, they're heavily encouraged to use it.) Question; for maintaining Macs and data, how reliable and thorough is Time Machine for backup/restoration? Does it just back up the user's home directory, or can it restore the Mac if, for example, the drive fails? And are there options for "securing" the data like corporate backup software for Windows does, to encrypt the data on the time machine drive?

    Read the article

  • Time Machine (OSX) doesn't back up files in Mount Point or Disk Image File

    - by Chris
    Hi all, I found this Q&A (http://superuser.com/questions/148849/backup-mounted-drive-of-an-image-in-time-machine) and this prompted me to ask the following question: I have two disk images which are scripted to be mounted on login. These two disk images are always mounted to the same location. These two disk images are encrypted TrueCrypt volumes. Time Machine (TM) will only back up the disk images the first time they are mounted, but not after that. As I modify documents within the volumes throughout the day, the modified timestamps are adjusted properly. However, TM does not back them up. TM never backs up the mount points which are two folders within my home directory. Any ideas as to why neither the mount point or the image files are backed up? Do the image files have to be closed (unmounted) after being modified for TM to back them up? Thanks, Chris

    Read the article

  • Windows 7 made 2 hour shift for Daylight Savings Time

    - by P a u l
    My win7-64 ultimate has set the clock ahead 2 hours. It appears to have done it in increments of 1 hour, with the second 1 hour shift made sometime today. The first, correct, shift for Daylight Savings was sunday morning. In the clock settings it says Mountain Time UTC-7, but the official time should be Mountain Time UTC-6. Update for Windows 7 (KB979306) IS installed. Microsoft appears to be able to turn even setting the clock into a hairball. I need the clock rock solid since I use the computer to record TV programs.

    Read the article

  • How to get average of multiple time series

    - by Supun Kamburugamuva
    I have few computers running. I want to get the average CPU usage of these computers and plot it as a graph. So I've collected CPU usage in regular intervals in these machines. So for each computer I have a data set of time and CPU usage. But the times at which CPU measurements are taken in different machines are not in sync. For example in 1st machine CPU may be measured in time 1, 5, 9. In the second machine CPU may be measured in time 2, 5, 8. I want to get an average data series from these different data sets. Could you point me to some resources? Thanks - Supun.

    Read the article

  • Partition External Harddrive already using Time Machine?

    - by Wex
    I have a 1TB external that I've used to backup my Mac for the past year using Time Machine. Unfortunately, my hard drive is getting close to full, and I'd like to move some of the stuff off of my Mac onto the same external drive. The problem is that the external drive is already full with my Time Machine Backups. I'd like to partition 750GB to the Time Machine Backups, and save the other 250GB for personal use. Is there any way I can go about this without corrupting my current backups? I'm willing to delete some of the older backups if necessary; again I'm just worried about corrupting the data.

    Read the article

  • OSX 10.9 Time Machine backup to NAS

    - by user214577
    I recently upgraded from 10.6.8 to 10.9. on snow leopard i was able to make time machine backups over the network to my nas, i think i had to tweak some settings but i dont recall what i did. now that i upgraded to mavericks, i cannot do backups to my nas using time machine. my question is, what do i have to do to allow time machine backups over the network in 10.9? i tried looking for solutions online but did not find anything relating to mavericks.

    Read the article

  • Excel 2007: Using a time to set XY chart axis scaling like in 2003

    - by CookieOfFortune
    In Excel 2003, when you created a XY chart using time as an axis, you could set the scaling of these axes by typing in the date. In Excel 2007, you have to use the decimal version of the time (eg. How many days since some arbitrary earlier date). I was wondering if there was a way to avoid having to make such a calculation? A developer posted on a blog that this issue would be fixed in a future release, but all versions of Excel 2007 I have tried have not resolved this issue. The relevant quote: Those of you familiar with this technique of converting time to a decimal may recall that Excel 2003 allowed you to enter a date and time like “1/1/07 11:00 AM” directly in the axis option min/max fields and Excel would calculate the appropriate decimal representation. This currently does not work in Excel 2007 but will be fixed in a subsequent release.

    Read the article

  • configure time sync for azure VMs

    - by Pharao2k
    I have several ExtraSmall-sized Azure VMs (PaaS / Cloud Service based) that are all experiencing drifting of the Windows clock. Research showed that this is quite common, especially in VMs with shared cores. Unfortunately even after configuring the w32time service to sync with time.windows.com and forcing a resync (w32tm /resync), there seems to be a time difference of 2 seconds to the configured NTP server. Though Microsoft states that w32tm is not meant as a high-precision sync tool, a difference of 2 seconds is (IMO) quite a lot for server-activities/processing. What does one have to do to get more accurate time sync?

    Read the article

  • What are the advantages of GLSL's compilation model?

    - by Kos
    GLSL is fundamentally different from other shader solutions because the server (GPU driver) is responsible for shader compilation. Cg and HLSL are (afaik) generally compiled a priori and sent to the GPU in that way. This causes some real-world practical issues: many drivers provide buggy compilers compilers differ in terms of strictness (one GPU can accept a program while another won't) also we can't know how the assembler code will be optimised What are the upsides of GLSL's current approach? Is it worth it?

    Read the article

  • How does operating system software maintains time clocks?

    - by Neeraj
    Hi everyone, This may sound a bit less relevant but I couldn't think of a better place to ask this question. Now consider this situation, you install an OS on your system, set the timezone and time, do some stuff and turn it off. (Note that there is no power going in to the computer). Now next time (say after some hours or days) you turn it on again, and you see the updated time. How is this possible even when my computer is not connected to the internet and was consuming no power during the period it was down.(Is there some kind of hardware hack?) please clarify!

    Read the article

  • Setting up a Time Capsule with port forwarding

    - by Kaji
    Our old AirPort Extreme station hit EOL, so we decided to upgrade it to a Time Capsule. Along the way, we're trying to also set it up with a separate guest network and port forwarding/NAT, however we're having trouble setting it up so that the time capsule is handling the DHCP leases instead of the router. We've got DSL through Verizon through a Westell modem/router to the Time Capsule. Done the RTFM thing, and we haven't been able to get it to work. Can anyone explain how to get things set up properly for this configuration?

    Read the article

  • Setting up a Time Capsule with port forwarding

    - by Kaji
    Our old AirPort Extreme station hit EOL, so we decided to upgrade it to a Time Capsule. Along the way, we're trying to also set it up with a separate guest network and port forwarding/NAT, however we're having trouble setting it up so that the time capsule is handling the DHCP leases instead of the router. We've got DSL through Verizon through a Westell modem/router to the Time Capsule. Done the RTFM thing, and we haven't been able to get it to work. Can anyone explain how to get things set up properly for this configuration?

    Read the article

  • Time Machine (archive) of pre-Leopard systems?

    - by benc
    I want to get off an older Mac OS X system permanently. It is an iBook G3, so that has two important characteristics: Power PC, not Intel based. Runs only Tiger, not Leopard. This means, as far as I can tell: Cannot run Time Machine directly. Here's the approach I have been contemplating: Mount the drive in Firewire mode. Back up the drive as a external drive to the Time Machine volume. Disconnect the drive (permanently). However, I'm concerned that this drive will eventually age out, when the Time Machine volume fills up, and the old-system-as-external-drive is gone. Would it be better to do a single backup with another utility, to shared disk?

    Read the article

  • Time Machine does not recognize my MacBook Pro

    - by qwertyuu
    Due to a clicking and beeping problem on my Macbook Pro (MBP), I got a 1 to 1 replacement from Apple which arrived today. I was able to my original setting using Time Machine restore. That works great. But after the restore and software update, the click on Time Machine to back up. But it says it doesn't recognize the backups. Now I am doing a full backup again that will take me a better of an hour. So what's the problem? How come Time Machine does not recognise the backups it restore from?

    Read the article

  • Time machine link error

    - by robinjam
    When attempting to perform a Time Machine backup, the backup appears to proceed as normal, until it finishes copying files at which point it complains that an "error occurred while linking files for" one of my external hard disks. During the previous backup that particular disk was in fact empty, and therefore I can't understand why Time Machine is attempting to link back to it. But alas. I've verified all my disks using Disk Utility and they all appear to be fine. Does anybody know what causes this error, and how I might go about fixing it? Failing that is there a way to force Time Machine to create a brand new backup rather than an incremental one? Thanks in advance!

    Read the article

  • System time wrong after running ntpdate because DST ignored

    - by Ian Dunn
    When I run ntpdate, my system clock displays the time as an hour behind what it should be. I know that ntpdate does everything in UTC, so I'm guessing there's a timezone setting wrong and it's ignoring Daylight Savings Time, but I can't figure it out. Here's what I've done so far: ln -sf /usr/share/zoneinfo/EST /etc/localtime to set the timezone Set UTC=true in /etc/sysconfig/clock so that DST will be automatically applied date -s hh:mm::ss to set system clock correctly hwclock -systohc --utc to set the hardware clock correctly At this point date and hwclock both display the correct time. But if I then run ntpdate 0.us.pool.ntp.org, the date output is an hour behind what it should be. I've looked at a dozen tutorials and can't figure out what I'm doing wrong. Does anyone have any ideas?

    Read the article

  • Copying single files into a folder that changes name every time the batch file is executed

    - by Daniel Jochem
    Can you please help, I am using this to put the text files made by the batch file into the folder created by the batch file as well. but my problem is that the name is changed of the new folder every time because it is named by the date and time it was created. This is the code: @echo off for /F " tokens=1,2,3* delims=/, " %%i IN ('date /T') DO ( set CUR_DAY_OF_WEEK=%%i set CUR_MONTH=%%j set CUR_DAY=%%k set CUR_YEAR=%%l) for /F " tokens=1,2,3* delims=:, " %%i IN ('time /T') DO ( set CUR_HOUR=%%i set CUR_MIN=%%j set AM_PM=%%k) if not exist E:\Private goto :F cd E:\Private md "E:\Private\%CUR_HOUR%.%CUR_MIN%%AM_PM% %j%%CUR_MONTH%-%CUR_DAY%-%CUR_YEAR%" goto :start :F if not exist F:\Private goto :G cd F:\Private md "F:\Private\%CUR_HOUR%.%CUR_MIN%%AM_PM% %j%%CUR_MONTH%-%CUR_DAY%-%CUR_YEAR%" goto :start :G cd G:\Private md "G:\Private\%CUR_HOUR%.%CUR_MIN%%AM_PM% %j%%CUR_MONTH%-%CUR_DAY%-%CUR_YEAR%" goto :start :start start /min A /stext A.txt start /min B /stext B.txt start /min C /stext C.txt start /min D /stext D.txt (As the directory (E:-G:) changes, how can I check all without an error? And once that is found, then put all these text files into the date folder.

    Read the article

  • Vista: "Change date and time" causes permissions error

    - by alexsome
    I double-click on the time in the bottom right to open the date and time panel. Then I click on the "Change date and time..." button (which has a shield) and I get the UAC dialog. I click "Continue", then am presented with an error that reads: Unable to continue You do not have permission to perform this task. Please contact your computer administrator for help. I will mention I have Comodo installed, but I have turned it off to test this out and I get the same results. All that I've found while googling were suggestions to turn UAC off, but I am interested in learning what the actual problem is. Thanks in advance.

    Read the article

  • Time Synch Architecture in Windows Domain Environment

    - by Param
    I just read the following article -- "In a domain, time synchronization takes place when Windows Time Service turns on during system startup and periodically while the system is running." ( http://technet.microsoft.com/en-us/library/cc779145%28v=ws.10%29.aspx ) From the above article i get to know that the first sync it take as soon as i start my system, but after that in how many minutes or second or in how many periodic interval my windows client ( Window XP, window7 or window server 2008 member ) synch with my Domain controller (PDC emulator )??? Do you have any idea, and how should i verify my synch time interval? My Domain Controller is Window server 2008 R2 Standard

    Read the article

  • Permissions restoring from Time Machine - Finder copy vs "cp" copy

    - by Ben Challenor
    Note: this question was starting to sprawl so I rewrote it. I have a folder that I'm trying to restore from a Time Machine backup. Using cp -R works fine, but certain folders cannot be restored with either the Time Machine UI or Finder. Other users have reported similar errors and the cp -R workaround was suggested (e.g. Restoring from Time Machine - Permissions Error). But I wanted to understand: Why cp -R works when the Finder and the Time Machine UI do not. Whether I could prevent the errors by changing file permissions before the backup. There do indeed seem to be some permissions that Finder works with and some that it does not. I've narrowed the errors down to folders with the user ben (that's me) and the group wheel. Here's a simplified reproduction. I have four folders with the owner/group combinations I've seen so far: ben ~/Desktop/test $ ls -lea total 16 drwxr-xr-x 7 ben staff 238 27 Nov 14:31 . drwx------+ 17 ben staff 578 27 Nov 14:29 .. 0: group:everyone deny delete -rw-r--r--@ 1 ben staff 6148 27 Nov 14:31 .DS_Store drwxr-xr-x 3 ben staff 102 27 Nov 14:30 ben-staff drwxr-xr-x 3 ben wheel 102 27 Nov 14:30 ben-wheel drwxr-xr-x 3 root admin 102 27 Nov 14:31 root-admin drwxr-xr-x 3 root wheel 102 27 Nov 14:31 root-wheel Each contains a single file called file with the same owner/group: ben ~/Desktop/test $ cd ben-staff ben ~/Desktop/test/ben-staff $ ls -lea total 0 drwxr-xr-x 3 ben staff 102 27 Nov 14:30 . drwxr-xr-x 7 ben staff 238 27 Nov 14:31 .. -rw-r--r-- 1 ben staff 0 27 Nov 14:30 file In the backup, they look like this: ben /Volumes/Deimos/Backups.backupdb/Ben’s MacBook Air/Latest/Macintosh HD/Users/ben/Desktop/test $ ls -leA total 16 -rw-r--r--@ 1 ben staff 6148 27 Nov 14:34 .DS_Store 0: group:everyone deny write,delete,append,writeattr,writeextattr,chown drwxr-xr-x@ 3 ben staff 102 27 Nov 14:51 ben-staff 0: group:everyone deny add_file,delete,add_subdirectory,delete_child,writeattr,writeextattr,chown drwxr-xr-x@ 3 ben wheel 102 27 Nov 14:51 ben-wheel 0: group:everyone deny add_file,delete,add_subdirectory,delete_child,writeattr,writeextattr,chown drwxr-xr-x@ 3 root admin 102 27 Nov 14:52 root-admin 0: group:everyone deny add_file,delete,add_subdirectory,delete_child,writeattr,writeextattr,chown drwxr-xr-x@ 3 root wheel 102 27 Nov 14:52 root-wheel 0: group:everyone deny add_file,delete,add_subdirectory,delete_child,writeattr,writeextattr,chown Of these, ben-staff can be restored with Finder without errors. root-wheel and root-admin ask for my password and then restore without errors. But ben-wheel does not prompt for my password and gives the error: The operation can’t be completed because you don’t have permission to access “file”. Interestingly, I can restore the file from this folder by dragging it directly to my local drive (instead of dragging its parent folder), but when I do so its permissions are changed to ben/staff. Here are the permissions after the restore for the three folders that worked correctly, and the file from ben-wheel that was changed to ben/staff. ben ~/Desktop/test-restore $ ls -leA total 16 -rw-r--r--@ 1 ben staff 6148 27 Nov 14:46 .DS_Store drwxr-xr-x 3 ben staff 102 27 Nov 14:30 ben-staff -rw-r--r-- 1 ben staff 0 27 Nov 14:30 file drwxr-xr-x 3 root admin 102 27 Nov 14:31 root-admin drwxr-xr-x 3 root wheel 102 27 Nov 14:31 root-wheel Can anyone explain this behaviour? Why do Finder and the Time Machine UI break with the ben / wheel permissions? And why does cp -R work (even without sudo)?

    Read the article

  • Windows Server 2008 R2 time keeps changing unexpectedly

    - by lmhost
    There is a serious problem with one of my servers time. At some random hours (5:59 localtime in the following example) it goes 1 hour back and keeps doing this again and again next times it reaches 5:59. Like this: 5:59-4:59 … 5:59- 4:59 and so on. It stays in the loop until I manually update its time. The server OS is Windows 2008 R2 Standard x64, acting as a standalone web server on the internet. time zone (UTC-05:00). system log: Information 4/13/2012 5:59:34 PM Kernel-General 1 None Information 4/13/2012 5:59:34 PM Kernel-General 1 None Information 4/13/2012 5:59:34 PM Kernel-General 1 None Information 4/13/2012 5:59:34 PM Kernel-General 1 None Information 4/13/2012 5:59:34 PM Kernel-General 1 None Information 4/13/2012 5:59:34 PM Kernel-General 1 None all of the above entries have same content: The system time has changed to ?2012?-?04?-?13T21:59:34.500000000Z from ?2012?-?04?-?13T22:59:34.500000000Z. Details XML View: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Microsoft-Windows-Kernel-General" Guid="{A68CA8B7-004F-D7B6-A698-07E2DE0F1F5D}" /> <EventID>1</EventID> <Version>0</Version> <Level>4</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000010</Keywords> <TimeCreated SystemTime="2012-04-13T21:59:34.500000000Z" /> <EventRecordID>4060</EventRecordID> <Correlation /> <Execution ProcessID="4" ThreadID="80" /> <Channel>System</Channel> <Computer>********</Computer> <Security UserID="S-1-5-18" /> </System> - <EventData> <Data Name="NewTime">2012-04-13T21:59:34.500000000Z</Data> <Data Name="OldTime">2012-04-13T22:59:34.500000000Z</Data> </EventData> </Event> Any idea about what’s going on? Thanks

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >