Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 9/314 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • OpenVPN connected but not internet access on the client

    - by Stefan
    I've setup OpenVPN following this tutorial, and everything works fine except that I don't have an internet connection on the client while connected to VPN. http://www.howtoforge.com/internet-and-lan-over-vpn-using-openvpn-linux-server-windows-linux-clients-works-for-gaming-and-through-firewalls My VPS server config is as follows (Ubuntu): dev tun proto udp port 1194 ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem user nobody group nogroup server 10.8.0.0 255.255.255.0 persist-key persist-tun status /var/log/openvpn-status.log verb 3 client-to-client push "redirect-gateway local def1" #set the dns servers push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" log-append /var/log/openvpn comp-lzo plugin /usr/lib/openvpn/openvpn-auth-pam.so common-auth My client config is as follows (Windows 7): dev tun client proto udp remote XXX.XXX.XXX.XXX 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert stefan.crt key stefan.key comp-lzo verb 3 auth-user-pass redirect-gateway local def1 I've turned off the firewall on the server for testing purposes (it doesn't help), and tried both wired and wireless connecting on the client. I've tried many Google results... but nothing seems to help. Can you help me? Thanks so far...

    Read the article

  • My Linux desktop sees my HDMI-connected monitor, but my monitor says "No signal"

    - by hrunting
    I have a Gigabyte H55M-UD2H motherboard and an Acer S271HL monitor. When I connect the monitor to the motherboard via VGA, signal works perfectly. When I connect the monitor via HDMI, the system "sees" the connection, but the monitor receives no signal (the monitor shows a blue box which reads "No Signal" and then the monitor goes into power-saving state). Some fun facts about this: if I hook a different monitor to this box via HDMI, the monitor receives the output without issue (same computer/motherboard, same cable, different monitor) if I connect a different computer to the monitor via HDMI, the monitor receives the output without issue (different computer, same cable, same monitor) no signal is received whether in the OS or in the BIOS there are no BIOS options for controlling video output other than for selection of onboard vs. PCI/PCI-E-based video card (the system has no dedicated video card installed) The box is running Linux, so I have the output of xrandr which shows the connection and the monitor modes detected via DDC: ~$ xrandr --prop Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm EDID: 00ffffffffffff000472ca028d128022 1c160103803c2278ca7b45a4554aa227 0b5054bfef80714f8140818081c08100 9500b300d1c0023a801871382d40582c 450056502100001e000000fd00384c1f 5311000a202020202020000000fc0053 323731484c0a202020202020000000ff 004c55573044303130383531300a01e5 020324f14f0102030405060790111213 1415161f230907078301000067030c00 1000382d023a801871382d40582c4500 56502100001f011d8018711c1620582c 250056502100009f011d007251d01e20 6e28550056502100001e8c0ad08a20e0 2d10103e960056502100001800000000 000000000000000000000000000000de Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 HDMI3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on How do I get this monitor to recognize the output from this HDMI socket?

    Read the article

  • It takes a long time until Windows XP recognize I connected USB drive

    - by Pavol G
    I have a problem with my new USB disk. When I connect it to my laptop with Windows XP SP2 it takes about 4-5min until Windows recognizes it and shows it as a new disk. I can also see (disk's LED is blinking) that something is scanning the disk when I connect it; when this is done Windows immediately recognize it. Also when I'm copying data to this disk the speed is about 3.5MB/sec. It's connected using USB2.0. I tried to check for spyware (using Spybot), also tried running Windows in safe mode. But still have the same problems. Do you have any idea what could help to solve this problem? On Windows Vista (another laptop) everything is ok, disk loads in about 15sec and speed is about 20-30MB/sec. Edit: I tried to update to SP3 - no change Edit2: When this "strange" scanning occurs I can see that DPCs process is taking about 50% of CPU. When the scan ends (after 5min) this process take 0% again. Edit3: About the scan time, currently it's taking about 5min, but this time is growing as I'm adding more data to the disk, currently its about 40GB and I don't want to see how long it will take with 1000GB. Thanks a lot for every advice!

    Read the article

  • Two parts: linux startup script to connect to bluetooth and cron to keep it connected

    - by D.R.
    I have a mini bluetooth keyboard and a Raspberry Pi running a Debian-based distro. I know the MAC address of the keyboard but for this question, let's just use AA:BB:CC:DD:EE:FF. Right now I have to have a wired keyboard connected as well as my bluetooth dongle for the mini-keyboard and on the wired keyboard, I have to run the following when the device boots up: sudo hidd --connect AA:BB:CC:DD:EE:FF If the device goes idle for too long, then the bluetooth disconnects and I have to pull out my wired keyboard and retype that same command. What I'm looking for it a way to have that command run at startup and a way to sense if it gets disconnected so that it will auto reconnect. The annoying thing is that they keyboard has to be in pairing mode (even though it has already been paired) when I run that command, otherwise it tells me the host is down. So perhaps the script needs to prevent it from disconnecting due to inactivity, otherwise I'll have to put it back in pairing mode to reconnect. So to recap: - A script to connect at startup (I can make sure to put the keyboard into pairing mode before turning it on) - A script to prevent it from disconnecting (maybe some sort of signal to send to it every 60 seconds or something?) Any help with this is greatly appreciated! StackOverflow is always the best place to find answers to weird questions! I've been searching long and hard for an answer, but finally had to resort to coming here! Thanks!

    Read the article

  • Using public interfaces on a server connected through a GRE tunnel

    - by Evan
    I'm pretty new to networking so please forgive any terminology mistakes. I have 2 servers connected with a GRE tunnel. Server1 (10.0.0.1) ---- Server2 (10.0.0.2) I want to be able to bind to the public IPs on Server2 using Server1. To do this, I setup virtual interfaces with Server2's public IPs on Server1 and then used routing rules on Server1 to route the packets through the GRE tunnel. On Server1: ip rule add from [Server2's first public IP] table gre ip rule add from [Server2's second public IP] table gre ip route add default via 10.0.0.2 dev gre1 table gre This works great and I can see the packets arriving via GRE on Server2. I can see the packet exiting the tunnel on Server2's gre1 device as shown: From Server1: ping -I [Server2's public ip] google.com tcpdump from Server2's GRE tunnel device: 12:07:17.029160 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) [Server2's public ip] > 74.125.225.38: ICMP echo request, id 6378, seq 50, length 64 This is exactly the packet I want. However, I'm not seeing it go out at all on eth0:0 (where Server2's public IP is bound to). I've tried to use routing rules to get packets coming from Server2's public IP (which would be coming out of dev gre1) to go through dev eth0 on the public default gateway and that doesn't work either. I'm at a loss, thank you to anyone who can help.

    Read the article

  • Outlook won't re-connect to exchange after network is re-connected

    - by stan503
    I have a setup at my desk where I connect my computer to a an RJ45 switch that switches between two networks. One network is the corporate network, which is maintained by my company's IT, and the other is my own private network where I do testing (the two networks have to be separated). The corporate network hosts the exchange server where I get e-mail. When I switch from the private network to the corporate network, I expect Outlook to re-connect to the exchange server. However, I have found that sometimes when I come back, Outlook take an extremely long time to re-connect. Send/Receive will give me back the error 'The server is not available' (0x8004011D). It will sit there for 10 minutes to a few hours before it finally re-connects. The only other option is to reboot my computer, which is a huge pain for me since I run multiple VMs on it. This usually happens when I'm connected to the private network for a significant amount of time, so I'm thinking it's because Outlook has cached the network status. Is there a way to force Outlook to do a 'hard' re-connect to the exchange server? I'm using Windows XP SP 3 with Outlook 2007.

    Read the article

  • when vpn is connected intenet is not accessible

    - by javapowered
    I need vpn to access certain lan. The problem is - when I connect to vpn intenet stop working. But I need to have access to lan and intenet at the same time. When VPN is connected and I try tracert, I receive "The network is unreachable" message. Sorry about Russian language below, this is copy-pasted from console: C:\Users\Oleg>tracert 173.194.69.102 ??????????? ???????? ? bk-in-f102.1e100.net [173.194.69.102] ? ???????????? ?????? ??????? 30: 1 * * * ???????? ???????? ???????? ??? ???????. 2 1.1.1.1 ????????: ???????? ???? ??????????. ??????????? ?????????. How can I fix this problem?

    Read the article

  • External SATA drive does not work without the optional USB cable *also* connected

    - by Software Monkey
    I have Vantec NST-260SU external eSATA/USB drive enclosure (which came with an optional separate power supply) connected to a relatively new Windows 7 computer. The drive should work as a SATA drive with either the separate power supply or using a USB cable solely for power. I would prefer to use the external power supply because I have used all my rear USB ports. Now, if I connect both the eSATA and USB cable, then: The drive shows in the BIOS list of AHCI drives (and not in the list of attached USB devices). Everything I can see about it in Computer Management seems to show it as a SATA driver (for example, it shows as "Location 0 (Channel 5, Target 0, Lun 0)" like my other SATA drives (and not "on USB Mass Storage Device" like my USB flash-drives). It seems very fast, very much faster than my USB flash drives. However, if I disconnect the USB cable and attach the power adapter instead, the drive does not show in the BIOS list and cannot be seen by Windows. The power LED on the enclosure is lit, and the drive enclosure becomes warm after running for a bit, so I am sure it is receiving power. Does anyone know if this device requires both the USB and eSATA cable, and if so, why? Or is there possibly something I need to do to reset the enclosure to not need the USB - the install instructions are pretty clear that you must connect the SATA cable before connecting the USB cable in order for the drive to function as SATA, which I am sure I did. PS: I have reviewed the small manual which came with it, which has not been of help.

    Read the article

  • Trouble printing to local printer when connected to VPN with split-tunneling enabled

    - by Marve
    I'm a volunteer network admin for a multi-tenant non-profit office space. One of our new tenants uses a VPN to connect to remote resources using RRAS and Small Business Server 2008. They also have a local network printer for the workstations in our office. When connected to the VPN, they cannot print to the local printer. I informed their network admin that they need to enable split-tunneling to fix this. Their network admin enabled split-tunneling, but apparently printing still didn't work. He told me that I need to open port 1723 on our office firewall to allow it to work. I'm just a novice administrator and not familiar with RRAS, but this doesn't sound right to me and I haven't been able to find anything on the web to validate it. Additionally, my understanding of split-tunneling is that it is handled entirely by the VPN client and should work irrespective of firewall settings. Is my understanding of the situation incorrect? What steps should I take to resolve this problem?

    Read the article

  • 1080p monitor: connected through VGA - perfect, HDMI - awful

    - by develroot
    When I connect my 23" monitor (1920x1080) to my pc through HDMI, I encourage some problems. It's not full screen That's it. There are ~1cm black borders on right and left side and ~0,5cm black borders on the top and the bottom of the monitor. That's pretty frustrating. I tried adjusting overscan, but I can't mannualy type the % of overscan that I need. I can only select between ex. 8 and 10% in AMD Vision Engine Control center, but what I need is 9%. Next, even if i select 10% and the image fits all the corners, but after log off all the settings are lost and I have to do it again and again. Text, images, everything looks blurry That surprised me a lot. Should'nt HDMI quality be better than VGA's one? When connected through HDMI, the text isn't readable. It's like a very low refresh rate, although i'm running at 60Hz. Also the text has something like little shadows, very very annoying. Are there any tips to get the same quality as with VGA, with HDMI ? (running on integrated ATI Radeon HD4200, which, appearently, is the best card I have ever seen in terms of integrated ones)

    Read the article

  • How To Monitor Home Wireless Network Connected Devices Bandwith

    - by GWLlosa
    (Originally posted on SuperUser, not sure if it might be better suited here) I have in my home a standard Comcast cable internet connection. I have it going from the wall to a cable modem, and from the modem to a late-series Linksys router, which provides wired and wireless networking. The vast majority of the users are wireless connections. For day-to-day tasks, this connection is fully sufficient for all my needs. However, on regular occassions, we have social gatherings that involve many people bringing laptops and other PCs and using the network and internet simultaneously, frequently for gaming. I have no administrative oversight over these machines; they have been known to be riddled with spyware and/or bloatware or be running torrents, legal or otherwise. The only reason I care is that on a regular basis, one of the machines will flatline my internet bandwith, and consume it all in order to upload/download/spam people/whatever. When this happens, the latency of the connections for gaming and the like becomes unacceptable, and everyone suffers. My question is: Is there a system I can set up whereby I can easily monitor the various systems connected to my wireless connection, see how much bandwith each one is using, and for what ends? That way, at a glance, I can spot the offending machine and kick it from the connection, without having to go from machine to machine, checking each one's "bandwith used" properties manually, and dealing with the owner's indignant protests all the while. I understand this will likely involve 3rd-party software and/or hardware; my issue is I don't even know where to begin.

    Read the article

  • Windows 7 computer apparently connected to working wireless network but can't access router page or internet

    - by Hemmer
    I can consistently connect successfully to both the router and the internet using both my phone and two different computers which strongly suggests that the issue is at the desktop end. Only my Windows 7 desktop machine has stopped getting internet connectivity. It manages to connect to the router's network using the Windows 7 wireless dialog, but can't access either the router configuration page (192.168.1.1) or the internet in general once connected. The strange thing is the wireless network icon in the notification bar shows a full strength signal, sometimes with the yellow warning triangle. The output of ipconfig /all is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-12-17-94-98-90 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.102(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 08 June 2011 10:32:16 Lease Expires . . . . . . . . . . : 08 June 2011 12:32:16 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 NetBIOS over Tcpip. . . . . . . . : Enabled I've tried renewing DCHP settings disabling IPv6 resetting TCP stack uninstalling and reinstalling WLAN card drivers I've not installed anything new or made any changes to my knowledge, this just happened out of the blue. The only possible change is my friend connected his macbook to the network, but that has gone now and shouldn't have any lasting effects? TCP/IPv4 is set to automatically find an IP address. Antivirus is MSE (up to date) and doesn't detect anything unusual. Any ideas where to go next? Any help is greatly appreciated. For reference, the results of ipconfig /all on one of the working computers is: Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-16-CF-67-E5-97 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 Lease Obtained. . . . . . . . . . : 08 June 2011 10:26:38 Lease Expires . . . . . . . . . . : 08 June 2011 12:26:38 UPDATE: Still not working, but I've managed to find a temporary workaround by tethering my Android phone, effectively becoming a new wifi adapter. Will be moving to a new flat so will test if it is a network specific thing - maybe the card has got damaged somehow? Also will see if the card is working with Linux soon.

    Read the article

  • Web Part Error: This page has exceeded its data fetch limit for connected Web Parts

    - by user348515
    Hi Experts, I have a display form with two custom list forms and both are connected to each other and they display the results according to the filter. But when ever I sort on any field, it gives the following error: Web Part Error: This page has exceeded its data fetch limit for connected Web Parts. Try disconnecting one or more Web Parts to correct the problem. I appreciate any help. Thanks SP

    Read the article

  • Help finding longest non-repeating path through connected nodes - Python

    - by Jordan Magnuson
    I've been working on this for a couple of days now without success. Basically, I have a bunch of nodes arranged in a 2D matrix. Every node has four neighbors, except for the nodes on the sides and corners of the matrix, which have 3 and 2 neighbors, respectively. Imagine a bunch of square cards laid out side by side in a rectangular area--the project is actually simulating a sort of card/board game. Each node may or may not be connected to the nodes around it. Each node has a function (get_connections()), that returns the nodes immediately around it that it is connected to (so anywhere from 0 to 4 nodes are returned). Each node also has an "index" property, that contains it's position on the board matrix (eg '1, 4' - row 1, col 4). What I am trying to do is find the longest non-repeating path of connected nodes given a particular "start" node. I've uploaded a couple of images that should give a good idea of what I'm trying to do: In both images, the highlighted red cards are supposedly the longest path of connected cards containing the most upper-left card. However, you can see in both images that a couple of cards that should be in the path have been left out (Romania and Maldova in the first image, Greece and Turkey in the second) Here's the recursive function that I am using currently to find the longest path, given a starting node/card: def get_longest_trip(self, board, processed_connections = list(), processed_countries = list()): #Append this country to the processed countries list, #so we don't re-double over it processed_countries.append(self) possible_trips = dict() if self.get_connections(board): for i, card in enumerate(self.get_connections(board)): if card not in processed_countries: processed_connections.append((self, card)) possible_trips[i] = card.get_longest_trip(board, processed_connections, processed_countries) if possible_trips: longest_trip = [] for i, trip in possible_trips.iteritems(): trip_length = len(trip) if trip_length > len(longest_trip): longest_trip = trip longest_trip.append(self) return longest_trip else: print card_list = [] card_list.append(self) return card_list else: #If no connections from start_card, just return the start card #as the longest trip card_list = [] card_list.append(board.start_card) return card_list The problem here has to do with the processed_countries list: if you look at my first screenshot, you can see that what has happened is that when Ukraine came around, it looked at its two possible choices for longest path (Maldova-Romania, or Turkey, Bulgaria), saw that they were both equal, and chose one indiscriminantly. Now when Hungary comes around, it can't attempt to make a path through Romania (where the longest path would actually be), because Romania has been added to the processed_countries list by Ukraine. Any help on this is EXTREMELY appreciated. If you can find me a solution to this, recursive or not, I'd be happy to donate some $$ to you. I've uploaded my full source code (Python 2.6, Pygame 1.9 required) to: http://www.necessarygames.com/junk/planes_trains.zip The relevant code is in src/main.py, which is all set to run.

    Read the article

  • New monitor connected to HDMI adaptor doesn't show output after booting

    - by Paul
    Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you. Thank you Anees Bakrain Only the ATI Radeon HD 4300/4500 Series adapter is displayed in the Device Manager, for that reason I have to assume that the onboard display adaptor is not active. All 40 drivers of Sarastro2 are up to date and the HDMI cable can not be the problem because both monitors displayed the boot sequence up to the moment when Windows 7 was loaded completely. This was the moment, when the Asus monitor lost its signal. Both connectors, HDMI and DVI are connected and removing the DVI connector would not solve my problem of running both monitors simultaneously. However, your suggestions shifted my seventy one year old brain into the next gear. The only question remaining is; “Why the signals to the Asus monitor stop after the sequence is complete”. The ATI Radeon HD 4300/4500 Series adapter seems to be capable of sending simultaneous HDMI and DVI signals, what is done during the boot sequence. Why do the signals change after the boot sequence is complete is the key question or der springende Punkt? Is this a correct assumption slhck?

    Read the article

  • how to use iptables to block the IP of device connected to openwrt router

    - by scola
    I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

    Read the article

  • How to stay connected to the programming community?

    - by Anton
    I often find myself detached from the programming community and I generally find out about all the "cool" things that are happening after they have already happened. So my question is how do you stay connected and up to date with the programming community? Podcasts, blogs, meet ups, conventions, twitter, talking with your co-workers whatever it may be that keeps you connected. Please provide actual examples of which blogs, talks, etc you use.

    Read the article

  • HTTP 403.9 - Access Forbidden: Too many users are connected

    - by sdsd
    hi I have created an application in VStudio. It ran nicely in debugging mode, but my computer became slower and slower as I worked until it finaly became frozen. after I manualy restarted it, the app wasn't running any more in debug and I get this execption in the browser. Only I am connected right now to the app. I have restarted the computer so there coudn't be any instance of a client connected I have removed and reinstalled the IIS what is wrong?

    Read the article

  • Minimum cost strongly connected digraph

    - by Kazoom
    I have a digraph which is strongly connected (i.e. there is a path from i to j and j to i for each pair of nodes (i, j) in the graph G). I wish to find a strongly connected graph out of this graph such that the sum of all edges is the least. To put it differently, I need to get rid of edges in such a way that after removing them, the graph will still be strongly connected and of least cost for the sum of edges. I think it's an NP hard problem. I'm looking for an optimal solution, not approximation, for a small set of data like 20 nodes. Edit A more general description: Given a grap G(V,E) find a graph G'(V,E') such that if there exists a path from v1 to v2 in G than there also exists a path between v1 and v2 in G' and sum of each ei in E' is the least possible. so its similar to finding a minimum equivalent graph, only here we want to minimize the sum of edge weights rather than sum of edges. Edit: My approach so far: I thought of solving it using TSP with multiple visits, but it is not correct. My goal here is to cover each city but using a minimum cost path. So, it's more like the cover set problem, I guess, but I'm not exactly sure. I'm required to cover each and every city using paths whose total cost is minimum, so visiting already visited paths multiple times does not add to the cost.

    Read the article

  • Ensure connection to a POSPrinter connected via COM

    - by Alexander
    Hi, I need to make sure that the connection to a POS printer is successful before writing data to the database and then printing a receipt. The POSprinter is normally of type BTP 2002NP but may differ. The common thing is that they are all connected via COM-port and NOT usb, so no drivers installed at all on the client. Can I send some kind of "ping" on a COM-port and check if a device is connected and turned on? Any help or suggestions are very much appreciated. Additional information, the application is developed in VB.net and Visual Studio 2008

    Read the article

  • What is the typical method to separate connected letters in a word using OCR

    - by Maysam
    I am very new to OCR and almost know nothing about the algorithms used to recognize words. I am just getting familiar to that. Could anybody please advise on the typical method used to recognize and separate individual characters in connected form (I mean in a word where all letters are linked together)? Forget about handwriting, supposing the letters are connected together using a known font, what is the best method to determine each individual character in a word? When characters are written separately there is no problem, but when they are joined together, we should know where every single character starts and ends in order to go to the next step and match them individually with a letter. Is there any known algorithm for that?

    Read the article

  • Multiple INET sockets (mulple IP's too) connected to UNIX sockets

    - by Andrew
    HOST = same host all the time, accepts multiple connection. I have a dedicated server and I will buy extra IP's. Socket 1 connects to HOST:PORT, from IP-1 Socket 2 connects to HOST:PORT, from IP-1 Socket 3 connects to HOST:PORT, from IP-1 Socket 4 connects to HOST:PORT, from IP-2 Socket 5 connects to HOST:PORT, from IP-2 Socket 6 connects to HOST:PORT, from IP-2 After creating all sockets I want to access them easy as UNIX sockets from PHP. /sys/socket1 /sys/socket2 /sys/socket3 /sys/socket4 /sys/socket5 /sys/socket6 I want the sockets to work in background (like daemon) and I want to be able to connect from PHP to any of this sockets and RECV/SEND whatever I want. I saw "socat" and I think that's the solution for me, please tell me how to use socat, or how to do it other way. Thankyou!

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >