Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 5/314 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• My NetGear router suddenly started showing limited access for all wifi connected laptops

  - by Yasser

  I have netgear n300 router which I had installed about 6 months back. Here is how the setup is, I have a local internet provider by the name of "Hathway" they have this modem which is in turn connected to the router and a wire from router is connected to my desktop. As shown in this pic below, except for the laptop I use a desktop rest all the connection is same So with this connection and the below configuration, every thing worked fine. The desktop would work also all my laptops and mobile devices would connect and be able to access the internet without any problem. Now suddenly since yesterday (with no changes made whatsoever to this config) all my laptops start showing the limited connection message and cannot connect to the internet. However the desktop which is connected can access the internet. Can someone please guide me on this.

  Read the article

• My wifi internet router connection resets when more devices connected

  - by joeeoj

  The wifi internet router is connected directly to Internet cable. The main Pc is attached to it via LAN cable, while 1 laptop and 3 mobile phones connect to it via wifi. Whenever 2 or more devices connect via wifi, the internet connection breaks after one minute and internet connection resets. I tracked this behaviour for weeks, and came to conclusion: It seems like some 'device 1' got IP then it went to suspend mode. Then 'device 2' connected to router and got the same IP. Then the 'device 1' woke up from suspend mode and tried to use his old IP. The router sees that 2 same IP addresses exists and automatically reset internet connection. Is this possible? Have I tracked the problem correctly and how to solve it? The router is set to lease 100 IP addresses to devices who try to connect. The password is strong and no hacker's device is being connected to my wifi network. Tried changing password and AP's name.

  Read the article

• X11 display over ssh with monitor connected to remote machine

  - by Sumit

  I have the following setup: Machine A (a.corp, 192.168.100.130, local machine) and Machine B (b.corp, remote machine) and a monitor is connected to each of these machines. When I ssh from a.corp to b.corp as $ ssh -X b.corp $ xclock Error: Can't open display: I tried setting the DISPLAY variable as $ ssh -X b.corp $ export DISPLAY=`echo $SSH_CLIENT|cut -f1 -d\ `:0.0 $ echo $DISPLAY 192.168.100.130:0.0 $ xclock xclock's display opens up but on the monitor connected to b.corp (remote machine) and not on the monitor connected to a.corp (local machine). Is there a way to force the display to appear on the monitor of the local machine (a.corp)?

  Read the article

• Remote access not working without connected monitor

  - by winSharp93

  I am trying to configure a Windows Server 2008 as a Home Server for my personal use (mainly for storing documents, hosting source-control, etc.). The "server" consists of an Intel Atom 2700DC board and an Intel SSD. Configuring remote access to the server, I am confronted with a very strange problem: As long as a monitor is connected to my server, remote access works without any problems. However, when no monitor is connected at boot-time, remote access simply won't work (I keep getting errors when trying to connect that the remote server was not found or that remote access is disabled). Windows definitely boots when no monitor is connected as I receive a message asking me whether to enter safe mode when booting after powering the server down by plugging the power cord. When I plug in a monitor after boot, it stays turned off and remote desktop connections still fail. Do you have any ideas about what I could try?

  Read the article

• Internet wireless connected with limited access, windows vista

  - by Wawa wiya

  Hello I had some malware in my computer so I did a bit of manual work to remove it including resetting TCP/IP. Now the malware is gone. I can see my home wireless network and I can get connected to it but when connected I get the Internet wireless connected with limited access message. When I go to the IE I cannot browse. When I tried to ping 192.168.1.1 I got an Error Code 1231 Unconnected Network Problem. I have deactivated my Windows firewall as I thought it could be hyperactive security. Still no luck. I have Norton but it is not active, I have also Avast and AVG installed but they are not active. Any ideas?

  Read the article

• Internet connection in android emulator always displays connected state

  - by ganesh

  hi I tried in many ways to check Internet connection in my android emulator ConnectivityManager conMgr = (ConnectivityManager)getSystemService(Context.CONNECTIVITY_SERVICE); NetworkInfo info= conMgr.getActiveNetworkInfo(); if(info != null || info.isConnected()) { Log.v("NetworkInfo","Connected State"); } else{ Log.v("NetworkInfo","Not Connected state"); Log.v("Reason",info.getReason()); } even if i disable Internet connection in my system ,my code seems to display Connected state so i guessed this may work if ( conMgr.getNetworkInfo(1).getState() == NetworkInfo.State.CONNECTED || conMgr.getNetworkInfo(0).getState() == NetworkInfo.State.CONNECTED ) { Log.v("Congr","Connection Present"); } else if ( conMgr.getNetworkInfo(1).getState() == NetworkInfo.State.DISCONNECTED || conMgr.getNetworkInfo(0).getState() == NetworkInfo.State.DISCONNECTED) { Log.v("conMgr"," No Connection"); } but the above code also displays "Connection Present" even when i disconnect Internet cables. .Please help to find a correct way to do this .I have ACCESS_NETWORK_STATE and INTERNET permission in my manifest file

  Read the article

• Weakly connected balanced digraph

  - by user1074557

  How can I prove that if a balanced digraph is weakly connected, then it is also strongly connected? (balanced digraph means that for every node, it's indegree and outdegree is the same and weakly connected means the non-directed version of this graph is connected). What I can think of so far is: if the graph is balanced, it means it is a union of directed cycles. So if I remove any cycle, it will stay balanced. Also each vertex in the cycle has one edge coming into it and one edge leading out of it.. Then I guess I need to use some contradiction or induction to prove that the graph is strongly connected.. That's where I confused.

  Read the article

• Automatically run script after connected to PPTP server

  - by hvtuananh

  Hi all, I'm using PPTP connection to connect to my office And I want to add a static route after connected to PPTP server. My problem is my IP on this connection is automatic Is there any way to run a script to manually add a route to route table when connected to PPTP server? I'm using Windows XP SP3

  Read the article

• Win 7 Wireless Connected With Good Signal But No Internet Access

  - by c00lryguy

  In Windows 7 I was connected wirelessly for about a week when one day I came home and the wireless was connected with a strong signal but it said that I had "No Internet Access" It's been 3 days since then now and I have yet to find a way to fix it. My wireless drivers are right off the disk that came with the wireless card. Can anyone help me? My problem is similar to these: http://forums.cnet.com/5208-7589_102-0.html?threadID=120346 http://social.answers.microsoft.com/Forums/en-US/w7network/thread/90841fe7-c910-424b-82d7-48be7ef69f39

  Read the article

• Use WiFi router connected to Ethernet not directly to Modem

  - by Mr. Man

  I have a spare router and the WiFi is really bad in some places in my house and I was wondering if it was possible to use the spare router connected to Ethernet and not directly connected to the modem. Thanks in advance!

  Read the article

• Wireless Connection unstable when multiple devices connected

  - by KingIsulgard

  My wireless network works perfectly when only 1 device is connected. Super fast, full strength. But as soon as multiple devices are connected to the wireless network the connections become unstable (constantly losing connection). It's quite annoying. I have a Sitecom Wireless 300N XR Gigabit Router WL-306, which should be a decent router so I'm guessing there must be something wrong with my configuration. Does any of you know what might cause this? Thanks

  Read the article

• ASUS N45SF - play subwoofer with audio connected

  - by Jaroslav Bucko

  I have notebook ASUS N45SF. It comes with dedicated subwoofer, which is connected to separate audio jack. When I connect any audio device to audio jack, internal speakers remain silent, but subwoofer too. I want to let subwoofer play even with audio device connected to jack. Are there any drivers or settings in OS, which would eneble this behaviour? I have Win7/Ubuntu dualboot so OS doesnt matter. Thanks

  Read the article

• Determine hostname of connected ethernet switch

  - by Beastcraft

  I've a bonding on two interfaces. I'd like to monitor wether they are connected to different switches (the switches have hostnames). ethX should be connected to switchX and ethY to switchY. Currently I'm checking this with following command: tcpdump -vv -s0 -i ethX ether host 01:00:0c:cc:cc:cc After a minute it prints out the hostname (and much more information) from the switch. Are there any other solutions to monitor this? Greeting

  Read the article

• How to control DVR connected cameras as IP Cameras

  - by Ajay

  We have analog IR cameras (not IP Cameras) and they are connected to DVR model no is (DVR Model: DVR H264, 16 Channel - ECOR264-16X1). We assigned a static IP to DVR and able to view all the cameras connected to it. Our requirement is to view individual cameras and recording option in remote location (the recorded data should store in remote) as like IP Cameras. Is it possible, if not, are there any DVR Model which can support like this.

  Read the article

• Vista is showing contents of flash drive that was previously connected

  - by user701510

  Today, after I clicked "folder X" in my external hard drive, instead of seeing the contents of "folder X", I see the contents of my flash drive (the last time it was connected)...which is not connected to my computer. My flash drive's files show for a couple of seconds before I am brought to "folder X" which was the folder I wanted to go to as mentioned in the beginning of this post. Any idea why this happened? I'm using Vista 32-bit business edition.

  Read the article

• Directly connected HP server and CX4 with fibre

  - by Ulysses Mpasdekis

  I have direcly connected (with fibre) a HP ProLiant BL460c G7 with a EMC CX4. I installed VMWare Esxi 5.0. The problem is that cx4 cannot connect to the blade. It seems that there is no connectivity problem, because the server can be connected to fibre switch with other equipment (EVA 4000) and also cx4 is already atteched to one same server. The problem seems to exist somewhere between the cx4 and esxi when they are direclty attached. Any ideas??

  Read the article

• VPN says connected but cannot ping tunnel ip

  - by Owl

  I have a VPN set up on a Symantec Gateway 320 and the status of the VPN is connected but the feature it provides is not working which means it is not actually connected..The only way to test it other than trying to use it in the program that utilizes it is to ping the remote subnet IP we use. mask numbers match, no settings have been changed it just stopped working.

  Read the article

• Windows 7 doesn't boot when second hard disk is connected

  - by kenshin9786

  I'm sorry for my bad english on beforehand. I have two hard disks, one SATA and another IDE. I have windows XP and 7 on the SATA one, and Ubuntu on the IDE. Both of them boots and works, bios recognizes them, just works. After I installed Windows 7, and connected the IDE drive, it freezes on "Starting Windows" (the black screen with the Windows logo). I unplug the IDE drive, and it starts normally. Windows XP starts normally on both situations (with or without the IDE one connected), same for Ubuntu (it works with both disks connected or just the IDE where it is). The IDE drive is on good status according to SMART. The IDE is first on boot order. It goes to the Ubuntu's grub first, then by default it goes to the Windows 7 bootloader, and then to XP. I think the problem is not about the bootloader or grub. I just read that it can be solved formatting the "problematic" hard disk because Windows 7 cannot handle so many active partitions or something like that. But that's not an option for me, I don't want to lose my Ubuntu nor have it unbootable. How can I solve this without this consecuences I mentioned? Any help would be appreciated.

  Read the article

• Folder Redirection/Offline Files on Win 7 | Folders are empty when not connected to the domain

  - by Matt

  I've been struggling with this issue for days and cannot seem to find anyone else with a similar issue. I will note first that I have tried using both roaming profiles and the group policy setting for force local profiles.... now onto the problem. What I am trying to do is have my teachers accounts log onto their laptops using their domain credentials. Once logged in their desktop and documents are redirected to a network share //server/redirects/documents/. This works fine when the computer is connected to the domain network. Offline File Sync works great and caches the files locally. However this all breaks down when the user logs in when the computer is no longer connected to the domain network. When the user logs in the desktop and documents are empty. What I find very odd is if I manually go to the offline file folder all of the files are there, The group policy folder redirection does not execute to the offline folder. Is this by Design? (It does not work like this on Vista, I have the exact same group policy settings set on vista machines and it works flawlessly). Additional Info When I look at the event log there is no folder redirection events at all when user logs in and is not connected to the network. In addition a new profile is create in c:/users/username.domain.00x. Every log in creates an additional profile. There is a event that states that a registry files were still in use. Any help would be appreciated.

  Read the article

• Wireless router that supports Bonjour between wire- and wireless- connected machines

  - by cefstat

  At home I have an ADSL modem that I use also as router. For the record, it is a DavoLink DV-2020 provided by Tele2 in the Netherlands. It turns out that if a computer is connected with a cable to the router and another computer is connected wirelessly, then they cannot see each other's services that are advertised through Bonjour (Apple's service discovery protocol, an implementation of Zeroconf). The combinations wired/wired and wireless/wireless work fine. This means that somehow wire- and wireless- connected machines are on different physical networks although their IPs are in the same range (192.168.1.*). The modem in question doesn't provide many options that I could play with. So, I was thinking of buying a second router to connect to the modem, and then connect all my machines to this second router. The problem is that I am afraid that I will have again the same problem. I am looking for suggestions on routers that offer the functionality I want (Bonjour between wired and wireless connections). I suppose that one solution would be Apple's Airport Extreme Base Station but at 160€ it is ridiculously expensive. Any other options out there? And why is it so difficult to find in the technical characteristics if wired and wireless connections are on the same physical network?

  Read the article

• Problem routing between directly connected Subnets w/ ASA-5510

  - by Zephyr Pellerin

  This is an issue I've been struggling with for quite some time, with a seemingly simple answer (Aren't all IT problems?). And that is the problem of passing traffic between two directly connected subnets with an ASA While I'm aware that best practice is to have Internet - Firewall - Router, in many cases this isn't possible. For example, In have an ASA with two interfaces, named OutsideNetwork (10.19.200.3/24) and InternalNetwork (10.19.4.254/24). You'd expect Outside to be able to get to, say, 10.19.4.1, or at LEAST 10.19.4.254, but pinging the interface gives only bad news. Result of the command: "ping OutsideNetwork 10.19.4.254" Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.19.4.254, timeout is 2 seconds: ????? Success rate is 0 percent (0/5) Naturally, you'd assume that you could add a static route, to no avail. [ERROR] route Outsidenetwork 10.19.4.0 255.255.255.0 10.19.4.254 1 Cannot add route, connected route exists At this point, you might gander if its a NAT or Access list problem. access-list Outsidenetwork_access_in extended permit ip any any access-list Internalnetwork_access_in extended permit ip any any There is no dynamic nat (or static nat for that matter), and Unnatted traffic is permitted. When I try pinging the above address (10.19.4.254 from Outsidenetwork), I get this error message from level 0 logging (debugging). Routing failed to locate next hop for icmp from NP Identity Ifc:10.19.200.3/0 to Outsidenetwork:10.19.4.1/0 This led me to set same-security traffic permit, and assigned the same, lesser and greater security numbers between the two interfaces. Am I overlooking something obvious? Is there a command to set static routes that are classified higher than connected routes?

  Read the article

• Fedora 15: em1 recently dissapeared and hostapd no longer serves internet to wirelessly connected devices

  - by Daniel K

  I have a laptop running hostapd, phpd, and mysql. This laptop uses an Ethernet connection to connect to the internet and acts as a wireless access point for my workplace's wifi devices. After installing some software and reconnecting my Ethernet elsewhere, my "em1" device is no longer present and wirelessly connected devices can no longer reach the internet. The software I recently installed is: pptp, pptpd, and updated some fedora libraries. I have also recently moved my desk and laptop to another location and thus had to reconnect the Ethernet elsewhere. Wifi devices no longer have access to the internet. Wirelessly connected devices are able to successfully log into the laptop, showing full strength, correct SSID, and uses the proper password. However, when I tried to connect to a site like google, the request times out. The device "em1" also no longer appears on my machine. Running: # ifup em1 will give me the following output: ERROR : [/etc/sysconfig/network-scripts/ifup-eth] Device em1 does not seem to be present, delaying initialization. And running: # dhclient em1 has the following output: Cannot find device "em1" When I run # dmesg|grep renamed, I get the following: renamed network interface eth0 to p4p1. I've tried to connect to the internet through p4p1 directly from the laptop and was successful. However, my wireless devices connected to my laptop are not able to connect to the internet. I have uninstalled pptp and pptpd using # yum erase ... but the problem still persists. To install pptp I used: # yum install pptp To install pptpd I did the following: # rpm -Uvh http://poptop.sourceforge.net/yum/stable/fc15/pptp-release-current.noarch.rpm # yum install pptpd To update my fedora libraries I used: # yum check-update # yum update EDIT: Running # route produces the following results: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.11.200.1 0.0.0.0 UG 0 0 0 p4p1 10.11.200.0 * 255.255.252.0 U 0 0 0 p4p1 172.16.100.0 * 255.255.255.0 U 0 0 0 wlan0

  Read the article

• Internet Problem: Wireless connected but no connection to internet

  - by Josh K

  Hey i have a interesting network setup on a laptop here and for some reason the internet isnt working. I am connected to a secure network via wireless router and taskbar says i am connected and with good signal strength but in my internet browser i cant connect to any websites, the error is: This webpage is not available. (Chrome) I am using Chrome, but websites dont work on IE either. Heres a little background on the setup i have. I have a Ethernet connected to the laptop with a static ip, and then i have the wireless setup with DHCP enabled. I am using the ethernet to connect to the network (for remote desktop) but the wireless for internet (to avoid the network firewalls). this set up has worked fine for a few months, but i cant figure out what is going on now. Might be worth it to note it is a Lenovo Thinkpad and i just uninstalled ThinkVantage Access Connections (as it was giving me ample problems prior to this one, which i consider a step up) Tried repairing connection as well, let me know if you guys have any ideas please! EDIT: Solved-Dead Modem in the server room.... Sorry guys didn't have access to that myself

  Read the article

• SATA-II motherboard and drives but only connected at SATA-I

  - by Shevek

  I have an Abit AB9 QuadGT motherboard which has a SATA-II controller. Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA. Both SSD and HDD are SATA-II and the optical drives are SATA-I. I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA-I (1.5 Gbps), not SATA-II (3.0 Gbps). I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA-II? I'm running Windows 7 Ultimate.

  Read the article

• SATA 300 mobo and drives but only connected at SATA 150

  - by Shevek

  I have an Abit AB9 QuadGT motherboard which supports SATA 300 drives Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA Both SSD and HDD are SATA 300 and the optical drives are SATA 150 I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA 150, not SATA 300. I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA 300? I'm running Windows 7 Ultimate

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >