Search Results

Search found 11311 results on 453 pages for 'ip fragmentation'.

Page 9/453 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• assign auto static ip on ubuntu 10.04

  - by ronakin

  I'm trying to set auto static ip. I've set the content of /etc/network/interfaces to be: auto lo auto eth0 iface eth0 inet static address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1. and /etc/resolv.conf to be: nameserver 192.168.1.1. It seems that the ip address have set successfully. However, when I plug out the lan cable and then plug it back, the ip address is not set. How can I make it automatically set the static ip when the lan cable is connected?

  Read the article

• ESXi Static IP setup with gateway on different subnet

  - by Erik Nelson

  I've got an ESXi server that I'm trying to assign a static IP to. I'm having trouble setting the gateway because (I presume) the gateway is on a different subnet. I've been able to accomplish this task on normal Linux servers by doing the following: route add 172.50.99.254 eth0 route add -net default gw 172.50.99.254 eth0 Now using the GUI config tools for ESXi I've tried setting the following IP: 172.50.5.151 Netmask: 255.255.252.0 Gateway: 172.50.99.254 The gateway does not stick, and when I try to add the gateway manually using esxcfg-route it says it has no route to the gateway IP. How can I get this static IP set correctly? (I don't have any control over the network setup).

  Read the article

• Convert IP Address format from ForeFront Firewall logs with SQL

  - by TrevJen

  I am trying to query IP addresses from Forefront Firewall logs, and I am a little stuck on the IP formatting C0A8E008-FFFF-0000-0000-000000000000 Can anyone give me the MSSQL command to turn this into standard human redable? UPDATE, I now see that I kust need to convert the first 8 charecters from hex to decimal....which I can then convert to IP. the trick is to parse those first charecters from the field with SQL

  Read the article

• Remotely viewing IP camera on Belkin N450 DB router

  - by Mike Miller

  I need to setup a wireless IP camera (Trendnet TV-IP501W) on my network so that it is remotely visible from anywhere. Right now I successfully connected it to my home network but nothing else. My router is a Belkin N450 DB. Any help would be much appreciated, including what this would be referred to as so I could more easily ask another forum. I believe it is something like "port forwarding" but I'm not sure. Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong? Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?

  Read the article

• Discover all websites that point to an IP address

  - by crn

  Our company owns over 60 domains and a few external IP addresses (several domains share an external IP address). How do I discover all the domains that use a particular IP address (e.g. 69.x.x.7) without going through the DNS information on each domain? The particular webserver is running Windows 2003 and IIS6. Thanks, in advance, for your help!

  Read the article

• Windows Firewall rule based on domain name instead of IP

  - by DennyDotNet

  I'm trying to allow a service to a set of machines via Windows Firewall. I'd like to add my home machine to the firewall but my home machine has a dynamic ip address. I use dyndns so that I have a hostname which I can always connect to. So I'm trying to see if there is a way I can use my hostname instead of an IP. Thanks Update Let me add a little more information, perhaps there are other ways to resolve my issue. The server is a web server hosted by RackSpace. I only want to allow RDP access from my work (static IP, so no problem) and home (dynamic). My home IP doesn't change too often, just often enough to annoy me. So maybe there is a better way to do this... maybe VPN?

  Read the article

• Different Ip adress range from provider

  - by victor

  I have different ip-range on the network, the dhcp is from the bordaband that says it uses different iprange as balancednetwork. however this causes issue as my nas and other computer gets the otner iprange of 84 and some computer gets iprange start at 94.254. i have use netgear switches gs108v2 but still get the issue with different ip adress. would apriciate answer on how i can get all devies on the same ip-range thanks

  Read the article

• Providing a static IP for resources behind AWS Elastic Load Balancer (ELB)

  - by tharrison

  I need a static IP address that handles SSL traffic from a known source (a partner). Our servers are behind an AWS Elastic Load Balancer (ELB), which cannot provide a static IP address; many threads about this here. My thought is to create an instance in EC2 whose sole purpose in life is to be a reverse proxy server having it's own IP address; accepting HTTPS requests and forwarding them to the load balancer. Are there better solutions?

  Read the article

• How to have 2 windows machines on the same network with the same IP address

  - by Stu

  I have a custom made ADC device that is spitting out data by addressed UDP packets. I have that device plugged into a 4 port switch. I have one windows embedded standard 7 machine which is the normal recipient of that data. To be able to receive the data (Using LabVIEW) the windows network adapter IPv4 settings must have a static IP address that corresponds to the UDP packet destination. I would like to add a second windows machine (This one is just regular Win 7 Pro) to simultaneously catch the data, however with all devices connected to the switch, the Win 7 Pro machine recognizes an IP address conflict and will not take the setting for the required static IP address. (The network adaptor settings show that the correct value has been entered but ipconfig shows that it is not actually set.) Neither windows machine needs to transmit network data, they only need to be able to receive the UDP data from the ADC device. Is there any way to disable this IP address conflict detection 'feature' of windows networking?

  Read the article

• I need to somehow change my ip address

  - by tric

  hello. i`m in a lan using iptables/masquerade. what i want to do, is to login in a web application.i write my user and passwd and click login and everything is fine, but if i try to modify something in that aplication it tells me that i have a wrong ip address.i knwo for sure that this app only allows ip 10.3.x.x .how can i trick that application to think that i have an ip from class 10.3.x.x and not my wan ip? 10x sorry for my bad english!

  Read the article

• Discover the public ip of a network without being connected

  - by Martin Trigaux

  Let say, I'm next to a network and can see the traffic (with airodump or similar tool) but can not decipher it (because I am not connected on the network). Is it possible to discover the public ip address of the network ? I know the MAC address of the users connected on the network but do I know the one of the router ? If yes, maybe there is a way to do the matching. I know IP addresses are not forever but some addresses are static and never change. Maybe there is a database of MAC address having recorded that. Google has a database that match MAC address and geographical coordinates so why not with IP addresses ? Other idea, if I know where am I, I can maybe guess the IP range used in the city by the ISP (is it findable ?) and then try to "ping" each IP on the range (if it is a /24, it's possible, even /16 maybe). Will I get some information like the MAC of the box or see some traffic on the network ? These are two ideas I had. I don't know if they are doable, certainly not perfect. Do you think of some others ? By trying several methods, maybe I can get a guess with a bit of luck. Thank you

  Read the article

• BIG IP - HTTPS Health Monitor setup

  - by djo

  I have a Web site that we have setup a health monitoring pages so we can take our servers in and out of the Big-IP as we see fit. Now we have just moved onto Big-IP and the issue I have hit is that you setup Health Monitors for port 80 and 443, now the 80 check works fine but when I to get the 443 check to look at our file it fails. Now I am aware as I am hitting the this page on the IP address over HTTPS is going to cause a cert error but I would have guessed that BIG-Ip would have been setup just to accept the cert and carry on with the check. Is what I am wanting to do possible? Also is there a way of just using a HTTP monitor for HTTPS? Because if port 80 has stopped sending traffic then if i use the same monitor for 443 it will stop traffic to that. Any help would be great! Thanks

  Read the article

• Accessing server by dedicated IP address

  - by Sherwin Flight

  I'm having an issue with my hosting provider after migrating to a new account. It's taking some time to get the problem sorted out, so I am hoping someone here can shed some light on the situation. The server is running WHM/cPanel, and the site I am trying to access has a dedicated IP address. When I connect to the server like this http://IP.HERE instead of showing my the website the way I would expect, it is showing the contents of a subfolder. So, while I would expect it to load public_html/ it is loading public_html/somefolder/ instead. Any idea why this is happening instead of showing the sites homepage the way I would expect? EDIT It is not redirecting, so the url is just http://IP.ADDRESS/, but the files listed are from a subfolder. So, it LOOKS at though I went to http://IP.ADDRESS/subfolder, when the URL says it should be showing the main folder contents. When I access the site using the domain name, it works properly, so I assume the document root is set correctly.

  Read the article

• moving my site, IP change worries...

  - by Sherif Buzz

  Hi all, my site has outgrown the shared hosting account it's on and i've setup a VPS that i'll be moving to soon. I cannot keep the same IP between my new account and the old one and I'm a bit at loss as to how to minimize user downtime while the new IP is reflected in all DNS caches. Note I cannot have the site running on both accounts at the same time as it's a dating site and this would cause data inconsistency. Here's what i am planning to do : Put up a 'under maintenance' page on old host Get the site up and running on new host, and update domain to point to new host. Hope downtime isn't too long. Would it be a good idea to have a link on the page in (1) that opens the new site but using it's ip ? Or even redirect all requests at the old host, to the new one (again by ip) ? Any advice much appreciated.

  Read the article

• Windows 2008 R2 Not resolving IP's or domains

  - by InsaneAR

  I have two servers with Microsoft Windows Server 2008 R2 x64, and today I realized that one of them don't resolve IP's or domain names. If I ping the same machine IP, it respond, but if I ping an external IP (like 8.8.8.8 or any other) it does not work. The same with domain names. At Windows Event Viewer I'm having Warning 1014: Name resolution for the name timed out after none of the configured DNS servers responded THE SERVER HAS CONNECTIVITY, I'm connected remotely and the services and incoming traffic (like FTP, etc) are working OK. Things I've done & tested: Run Kaspersky Virus Removal 10 Restart/Turn off the DNS Client service Clean the hosts file Reboot the server Turn off the Windows Firewall (there's not another firewall) Quit or replace the current DNS servers I just can ping the same machine IP or the gateway! Can anybody help me?

  Read the article

• Failure Scenarios in IP networks [closed]

  - by Karthik

  I am searching for a list of faults that may occur in a traditional IP network. To give you a better understanding of what I am looking for: For an MPLS-IP network the set of faults may be something as given in this cisco site. I want pointers to such kind of faults for a traditional IP network. Individual suggestions from you are welcome, but in doing so, please also provide a link to the official site from which you came with those failure scenarios.

  Read the article

• SBS 2003 CEICW - Multiple IP's causing error

  - by mushmush

  two IP adresses (different subnets) are assigned to one networkcard. In the Properties window the order is right, however the Server always picks the wrong one as the "default ip". This causes CEICW to fail with an "The DHCP Server service is started, but the DHCP scope does not match the network address of the server's local area network (LAN) adapter." error. The DHCP Server is installed and configured, but not for the other subnet as it is not needed. If i remove the other subnets IP everything works fine. Is there any way around that without temporarily removing the IP adress or configuring DHCP for one more Subnet?

  Read the article

• pretty-printing IP packets

  - by pts

  I'm receiving IP packets using the SLIP protocol, and I'd like to pretty-print them similarly to how tcpdump does it. My program is able to decode the SLIP protocol and create a single string containing an IP packet if necessary. I couldn't find any relevant tcpdump command-line flags except for -r. The file format is documented at http://www.tcpdump.org/pcap/pcap.html , but it looks a bit too complicated. Is there a Linux tool for pretty-printing raw IP packets?

  Read the article

• How to assign foo.example.com to one IP address and example.com to a different one?

  - by Guillaume Pierre

  Say that I have a domain name called example.com and two server located at 2 different IP addresses: 1.2.3.4 and 6.7.8.9. How could I assign example.com to 1.2.3.4 and the subdomain foo.example.com to 6.7.8.9? [EDIT] I did try to put a A record linking from @ to the first IP address and from foo.example.com to the second IP address, as illustrated below: And I did configure a vhosts called foo.example.com on my server at IP address 2. The @ record works. But after 3 hours waiting for the result (DNS delay), nothing happened with foo.example.com, which link to nothing. Why?

  Read the article

• What is the SEO impact of moving my domain to another IP address and what is the right way of doing this?

  - by ElHaix

  I am planning to move several websites to a new hosting provider - keeping the same URL but will resolve to different IP addresses. For example, some sites are Canadian content-only sites, hosted on .CA domains sitting on Canadian IP addresses. I want to move these to Amazon servers which have US IP addresses. The domain names will remain the same. (1) What is the SEO impact of this? (2) Will the site lose some ranking if the sites are moved to a new IP address (Canadian or not), and if so, what is the cleanest way of accomplishing this (some kind of 301's)?

  Read the article

• Windows Server 2008: specifying the default IP address when NIC has multiple addresses

  - by Cédric Boivin

  I have a Windows Server which has ~10 IP addresses statically bound. The problem is I don't know how to specify the default IP address. Sometimes when I assign a new address to the NIC, the default IP address changes with the last IP entered in the advanced IP configuration on the NIC. This has the effect (since I use NAT) that the outgoing public IP changes too. Even though this problem is currently on Windows Server 2008 How can you set the default IP address on a NIC when it has multiple IP addresses bound? There is more explication on my probleme. Here is the ipconfig DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.99.49(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.51(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.52(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.53(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.54(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.55(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.56(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.57(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.58(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.59(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.60(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.61(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.62(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.64(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.65(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.66(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.67(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.68(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.70(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.71(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.100(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.108(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.109(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.112(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.63(Duplicate) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.99.1 If i do a pathping there is the answer, the first up is the 99.49, also if my default ip is 99.100 Tracing route to www.l.google.com [72.14.204.99] over a maximum of 30 hops: 0 Machine [192.168.99.49] There is the routing table on the machine Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.99.1 192.168.99.49 261 10.10.10.0 255.255.255.0 On-link 10.10.10.10 261 10.10.10.10 255.255.255.255 On-link 10.10.10.10 261 10.10.10.255 255.255.255.255 On-link 10.10.10.10 261 192.168.99.0 255.255.255.0 On-link 192.168.99.49 261 192.168.99.49 255.255.255.255 On-link 192.168.99.49 261 192.168.99.51 255.255.255.255 On-link 192.168.99.49 261 192.168.99.52 255.255.255.255 On-link 192.168.99.49 261 192.168.99.53 255.255.255.255 On-link 192.168.99.49 261 192.168.99.54 255.255.255.255 On-link 192.168.99.49 261 192.168.99.55 255.255.255.255 On-link 192.168.99.49 261 192.168.99.56 255.255.255.255 On-link 192.168.99.49 261 192.168.99.57 255.255.255.255 On-link 192.168.99.49 261 192.168.99.58 255.255.255.255 On-link 192.168.99.49 261 192.168.99.59 255.255.255.255 On-link 192.168.99.49 261 192.168.99.60 255.255.255.255 On-link 192.168.99.49 261 192.168.99.61 255.255.255.255 On-link 192.168.99.49 261 192.168.99.62 255.255.255.255 On-link 192.168.99.49 261 192.168.99.64 255.255.255.255 On-link 192.168.99.49 261 192.168.99.65 255.255.255.255 On-link 192.168.99.49 261 192.168.99.66 255.255.255.255 On-link 192.168.99.49 261 192.168.99.67 255.255.255.255 On-link 192.168.99.49 261 192.168.99.68 255.255.255.255 On-link 192.168.99.49 261 192.168.99.70 255.255.255.255 On-link 192.168.99.49 261 192.168.99.71 255.255.255.255 On-link 192.168.99.49 261 192.168.99.100 255.255.255.255 On-link 192.168.99.49 261 192.168.99.108 255.255.255.255 On-link 192.168.99.49 261 192.168.99.109 255.255.255.255 On-link 192.168.99.49 261 192.168.99.112 255.255.255.255 On-link 192.168.99.49 261 192.168.99.255 255.255.255.255 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 10.10.10.10 261 255.255.255.255 255.255.255.255 On-link 192.168.99.49 261 255.255.255.255 255.255.255.255 On-link 10.10.10.10 261 How i can be sure the ip use in the image ( suppose to be the default ip address ) will be use by my server as the default address ?

  Read the article

• My Ip Address - Windows Vista - ipconfig : Cant find my ip address

  - by meyosef

  Hi, I type in doc $ ipconfig but not get My Ip Address. I get other values but not my ip address. Please help me, Thanks Yosef My Computer: Windows Vista adsl router (for few computers) My Ip is temp each time that i connect web he change

  Read the article

• Cannot resolve Hostname to IP, but IP to hostname works

  - by dotnetdev

  I have deployed a bunch of windows server VMs on a cloud hosting service. These machines are all joined to a domain controller on the same service, which also hosts DNS. All of the domain-joined machines have dynamic IP (along with the DC). If I try to resolve any of the hostnames remotely, it fails. For example, I am in SQL Server Reporting Services and I need to connect to a remote server. I provide the hostname of the desired target server and this fails, but then if I provide the IP, this works. How can I pass the hostname and have this resolve to IP? Is there anything I need to look for in the DNS server? It has records of the hostnames (in forward lookup I think), but reverse is empty. Isn't it the case that forward lookup resolves ip to hostname and reverse resolves hostname to ip? Also, I don't know what he subnet mask because this is not in my control, so the machines may not be in the same subnet - can this be a cause of the problem? Where is the problem? Thanks

  Read the article

• Cannot resolve Hostname to IP, but IP to hostname works

  - by blade

  Hi, I have deployed a bunch of windows server VMs on a cloud hosting service. These machines are all joined to a domain controller on the same service, which also hosts DNS. All of the domain-joined machines have dynamic IP (along with the DC). If I try to resolve any of the hostnames remotely, it fails. For example, I am in SQL Server Reporting Services and I need to connect to a remote server. I provide the hostname of the desired target server and this fails, but then if I provide the IP, this works. How can I pass the hostname and have this resolve to IP? Is there anything I need to look for in the DNS server? It has records of the hostnames (in forward lookup I think), but reverse is empty. Isn't it the case that forward lookup resolves ip to hostname and reverse resolves hostname to ip? Also, I don't know what he subnet mask because this is not in my control, so the machines may not be in the same subnet - can this be a cause of the problem? Where is the problem? Thanks

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user53864

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >