Search Results

Search found 5472 results on 219 pages for 'jack low'.

Page 9/219 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • Mobile CPU vs. Ultra-low CPU: performance

    - by Mike
    I'm choosing a new laptop and one of the questions is a type of CPU — mobile or ultra-low voltage. If to be more precise, I'm torn between two models of Intel Core i5 — i5-2410M and i5-3317U. Here is a comparison table. According to official specs the first-one has 2.3 GHz clock speed, while the second-one has only 1.7 GHz, that's about 25% difference. Is it really important parameter and which CPU is more preferable for a laptop for development, media and internet purposes?

    Read the article

  • Low CPU usage but High fan speed

    - by dhasu
    The problem I am facing is the CPU fan rotates with high speed even though the CPU usage is very low, less than 10%. I even cleaned the Dust off the Fan, I replaced the Thermal Material on the Processor. Installed an Extra Fan. Nothing seems to Work. Please Help.

    Read the article

  • Why is network utilization so low

    - by dean20007
    My network utilization in windows never seems to get above 1%. This seems absolutely tiny, does anyone know why it is so low and if there is anyway to increase it(or if it indeed does need increased) FYI: I use a D-LINK USB wireless adaptor

    Read the article

  • Installed ASUS HD4670, now unable to install ANY Debian due to low memory corruption

    - by Alfabravo
    I have a desktop PC which initially had the Intel D946gzis mobo, its chipset as video controller, some RAM and so. There I installed Debian without a problem alongside WindowsXP. I've bought an ASUS HD 4670 video card, installed it on the PC and now the installed Debian does not work, while the Ubuntu live CD refuses to run no matter if I set acpi, apic on or off... it throws me some low memory corruption at position just like shown here. With normal configuration, Debian throws kernel panic (keyboard lights blinking). Anyone have faced this before? Ideas? Thanks!! (meanwhile, debian hides in a virtualbox :'( ) Edited: Tried Ubuntu 9.10 x64 (due to the fact i've a core2duo at 2GHz) and it throws a kernel-panic to me (flashing caps and num LEDs). On screen, can be read different lines with things like: ... [ 1.957161] [] rb_erase+0xd6/0x160 [ 1.957266] [] page_fault+0x25/0x30 Could it be something about this new video card having ddr3?

    Read the article

  • Good low-cost SSL certificate providers

    - by phenry
    We need an SSL certificate to facilitate remote access and administration by a small number of employees. I don't want to have to train a bunch of non-technical users to install a self-published cert on their home computers, so I'd prefer to purchase one from a well-trusted provider. We won't be using it for any kind of e-commerce or things like that, so it seems hard to justify paying the prices demanded by some of the big-name providers. Who are some good low-cost providers to consider? What are the important differences between the offerings that are available at different price points? (And is the certificate business really as much of a racket as it seems?)

    Read the article

  • After low level formatting can microsoft track previously pirated windows installed on pc

    - by Neelabh
    I am getting call from Microsoft and they are forcing me to purchase so many licensed software but my budget is not that much.. So they are asking for On-Site Audit (SAM Review)... So I did low level formatting of my All PC's and Installed Ubuntu. So can they track I installed pirated windows xp earlier on these system or I need to change hardware.. After formatting on what parameter Microsoft Track earlier piracy: 1) By any Harddisk ID 2) By any Motherboard ID 3) By any IP Address Please help me otherwise I have to borrow so much money for licensing fee. Thanks in Advance..

    Read the article

  • Reverse Proxy Methods for Hosting a Low-Bandwidth Dynamic Website

    - by Casey
    I am building a webcam w/ HTTP server that will be running from a low-bandwith connection. The content on the site will be changing every 5 to 10 minutes. Instead of serving files directly from this connection, are there hosting companies that can act as a reverse proxy for my site? Therefore, if nobody is using the site, the local internet connection remains idle. And if I receive 1000 hits all at the same time, only one HTTP GET is required, and the hosting company (on a fat pipe) continues serving the other 999 requests? This doesn't sound like a very common usage model, but I feel like this would be the optimal solution to my situation.

    Read the article

  • Which browsers support Window's Low Integrity level?

    - by Ian Boyd
    Normally i like running ie, but it's rendering speed at high-dpi is poor. More recently i've switched to Chrome, but it does not support high-dpi displays. i'm interested in trying other browsers, but they must support protected mode. Are there any other browsers, besides IE and Chrome, that support Mandatory Integrity Levels (i.e. protected mode)? Browsers that i do know about: Browser Protected Mode High-dpi Aware ============== =============== ============== Internet Explorer Yes Yes Chrome Yes No Firefox No No Opera No No Are there any other? And just as an fyi, the clear, unambiguous, non-argumentative, non-subjective, question is: Are there any browsers, aside from Internet Explorer, available for Windows, that run at the Windows Low Mandatory integrity level, and support high-dpi (i.e. non-96 dpi) displays?

    Read the article

  • Proxy Methods for Hosting a Low-Bandwidth Dynamic Website

    - by Casey
    I am building a webcam w/ HTTP server that will be running from a low-bandwith connection. The content on the site will be changing every 5 to 10 minutes. Instead of serving files directly from this connection, are there hosting companies that can act as a public proxy for my site? Therefore, if nobody is using the site, the local internet connection remains idle. And if I receive 1000 hits all at the same time, only one HTTP GET is required, and the hosting company (on a fat pipe) continues serving the other 999 requests? This doesn't sound like a very common usage model, but I feel like this would be the optimal solution to my situation.

    Read the article

  • Caching Reverse-Proxy ISP Host for a Low-Bandwidth Server

    - by Casey
    I am building a webcam w/ HTTP server that will be running from a low-bandwith connection. The content on the site will be changing every 5 to 10 minutes. Instead of serving files directly from this connection, are there hosting companies that can act as a reverse proxy for my site? Therefore, if nobody is using the site, the local internet connection remains idle. And if I receive 1000 hits all at the same time, only one HTTP GET is required, and the hosting company (on a fat pipe) continues serving the other 999 requests? This doesn't sound like a very common usage model, but I feel like this would be the optimal solution to my situation.

    Read the article

  • VMWare Headphone Issue

    - by Ash_Geek_Pickney
    I am running VMWare Workstation Version 7 on a Windows 7 partition on a Macbook Pro. I have built a virtual XP machine within vmware to run some old music programs. The sound from my virtual machines comes out of my macbook speakers but the volume is not controllable using my macbook volume controls, only by using the volume control on the XP machine. My problem is that i need to use headphones, and when i plug a headphone jack into my macbook, the sound from my vmware virtual machines still comes out of the macbook speakers. I am baffled. Please help. Thanks in advance...

    Read the article

  • How can i get more low memory with the following setup:

    - by user539484
    Modules using memory below 1 MB: Name Total = Conventional + Upper Memory -------- ---------------- ---------------- ---------------- MSDOS 14 317 (14K) 14 317 (14K) 0 (0K) HIMEM 1 120 (1K) 1 120 (1K) 0 (0K) EMM386 3 120 (3K) 3 120 (3K) 0 (0K) OAKCDROM 36 064 (35K) 36 064 (35K) 0 (0K) POWER 80 (0K) 80 (0K) 0 (0K) NLSFUNC 2 784 (3K) 2 784 (3K) 0 (0K) COMMAND 2 928 (3K) 2 928 (3K) 0 (0K) MSCDEX 15 712 (15K) 15 712 (15K) 0 (0K) SMARTDRV 30 384 (30K) 13 984 (14K) 16 400 (16K) KEYB 6 752 (7K) 6 752 (7K) 0 (0K) MOUSE 17 296 (17K) 17 296 (17K) 0 (0K) DISPLAY 8 336 (8K) 0 (0K) 8 336 (8K) SETVER 512 (1K) 0 (0K) 512 (1K) DOSKEY 4 144 (4K) 0 (0K) 4 144 (4K) POWER 4 672 (5K) 0 (0K) 4 672 (5K) Free 552 944 (540K) 539 088 (526K) 13 856 (14K) Memory Summary: Type of Memory Total = Used + Free ---------------- ---------- ---------- ---------- Conventional 653 312 114 224 539 088 Upper 47 920 34 064 13 856 Reserved 0 0 0 Extended (XMS)* 64 898 256 2 671 824 62 226 432 ---------------- ---------- ---------- ---------- Total memory 65 599 488 2 820 112 62 779 376 Total under 1 MB 701 232 148 288 552 944 Total Expanded (EMS) 33 947 648 (33 152K Free Expanded (EMS)* 33 538 048 (32 752K * EMM386 is using XMS memory to simulate EMS memory as needed. Free EMS memory may change as free XMS memory changes. Largest executable program size 538 976 (526K) Largest free upper memory block 7 488 (7K) MS-DOS is resident in the high memory area. I'm running MS-DOS 6.22 on VMWare virtual hardware. This is memory state after memmaker pass, so i'm looking for optimization beyond memmaker. Note: NLS drivers (DISPLAY, KEYB, NSLFUNC) are essential for me. Thanks to @mtone for valuable reminder about MSCDEX /E which gave me 16KiB of low memory (see the diff)!

    Read the article

  • Pinging switch results in alternating high/low response times

    - by Paul Pringle
    We have two switches that are behaving strangely. When I ping them the responses alternate between high and low results: C:\Users\paul>ping sw-linksys1 -t Pinging sw-linksys1.sep.com [172.16.254.235] with 32 bytes of data: Reply from 172.16.254.235: bytes=32 time=39ms TTL=64 Reply from 172.16.254.235: bytes=32 time=154ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Reply from 172.16.254.235: bytes=32 time=142ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Reply from 172.16.254.235: bytes=32 time=143ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Reply from 172.16.254.235: bytes=32 time=146ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Reply from 172.16.254.235: bytes=32 time=152ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Reply from 172.16.254.235: bytes=32 time=153ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Reply from 172.16.254.235: bytes=32 time=153ms TTL=64 Reply from 172.16.254.235: bytes=32 time=2ms TTL=64 Other switches in the network behave normally. I've rebooted the switches, but the behavior still is there with the ping. Any ideas on how to troubleshoot this? Thanks!

    Read the article

  • Incredble low disk performance on HP DL385 G7

    - by 3molo
    Hi, As a test of the Opteron processor family, I bought a HP DL385 G7 6128 with HP Smart Array P410i Controller - no memory. The machine has 20GB ram 2x146GB 15k rpm SAS + 2x250GB SATA2, both in Raid 1 configurations. I run Vmware ESXi 4.1. Problem: Even with one virtual machine only, tried Linux 2.6/Windows server 2008/Windows 7, the VMs' feel really sluggish. With windows 7, the vmware converter installation even timed out. Tried both SATA and SAS disks and SATA disks are nearly unsusable, while SAS disks feels extremely slow.I can't see a lot of disk activity in the infrastructure client, but I haven't been looking for causes or even tried diagnostics because I have a feeling that it's either because of the cheap raid controller - or simply because of the lack of memory for it. Despite the problems, I continued and installed a virtual machine that serves a key function, so it's not easy to take it down and run diagnostics. Would very much like to know what you guys have to say of it, is it more likely to be a problem with the controller/disks or is it low performance because of budget components? Thanks in advance,

    Read the article

  • Low-traffic WordPress website on Apache keeps crashing server

    - by OC2PS
    I have recently moved my low-moderate traffic (1000 UAUs, 5000 pageviews on a busy day) website from shared hosting to a Centos 6 64-bit VPS with Apache and cPanel running on 4 quad-core processor (likely oversold) and 3GB memory (Xen). We've had problems from the beginning. The server keeps crashing. It seems PHP keeps expanding till it consumes all the memory and crashes the server. Some folks have suggested that I should abandon Apache/cPanel/PHP/mySQL and go with nginX/Varnish/PHP-FPM/SQLite. But that's just not possible for me as I am not very tech savvy and need a simple GUI like cPanel to be able to manage the mundane management tasks (can't afford to hire system administrator or get fully managed hosting). I have come across several posts discussing optimization of Apache for WordPress. But all of these lead to articles that are pretty dated such as this ~4 year old one from Jan 2009 - http://thethemefoundry.com/blog/optimize-apache-wordpress/ The article is pretty detailed and seems helpful, but I stumble even on the first step. My httpd.conf only has 2 loadmodule commands LoadModule fastinclude_module modules/mod_fastinclude.so LoadModule bwlimited_module modules/mod_bwlimited.so So I go total bust right there. Further, my httpd.conf says Direct modifications to the Apache configuration file may be lost upon subsequent regeneration of the configuration file. To have modifications retained, all modifications must be checked into the configuration system by running: /usr/local/cpanel/bin/apache_conf_distiller I am having trouble finding where to change the modules in WHM. Please can someone help me with updated guidelines on how to optimize Apache for WordPress? Many thanks! P.S. The WordPress installation also has WP Super Cache installed. P.P.S. I also have phpBB, OpenCart, and Menalto Gallery installed.

    Read the article

  • MonoTouch and CoreBluetooth Low Energy Required?

    - by user856232
    We are making MFi hardware and an iOS app. We will want to have the BT device notify our app even if we are not running periodically when certain events happen. I know the CoreBluetooth API is the one to use, but can't tell for sure if that API only works with BT Low Energy devices or if it will also work with regular (MFi of course) BT 2.1 and higher devices. So my question is: Does the CoreBluetooth API only work with Bluetooth Low Energy devices or will it also work with 2.1 devices?

    Read the article

  • Low Voting {API(Five Star)} Feedback

    - by D.J.
    Is there any module in drupal which provides low rating feedback. eg If someone wants to vote a content as <= 2 (out of 5). Before he does so, there will be a pop up window displaying text "Are you sure you want to rate so low?" etc. If there is no such module then is there any easy way of doing it?

    Read the article

  • Run a pc on battery for 3 days?

    - by Zen 8000k
    I am looking for a low power, low end pc able to run 24/7 without overheating and a way to support it in case of power failure. Power failures can be up to 72 hours. The pc dosen't need a monitor or keyboard. A modem must also be protected in case of power failure. When i say low end, i don't mean crap. The cpu needs to be x86 and have at least 1k cpu in this chart: http://www.cpubenchmark.net/index.php What's the best way to do this?

    Read the article

  • Determine if the current thread has low I/O priority

    - by Magnus Hoff
    I have a background thread that does some I/O-intensive background type work. To please the other threads and processes running, I set the thread priority to "background mode" using SetThreadPriority, like this: SetThreadPriority(GetCurrentThread(), THREAD_MODE_BACKGROUND_BEGIN); However, THREAD_MODE_BACKGROUND_BEGIN is only available in Windows Server 2008 or newer, as well as Windows Vista and newer, but the program needs to work well on Windows Server 2003 and XP as well. So the real code is more like this: if (!SetThreadPriority(GetCurrentThread(), THREAD_MODE_BACKGROUND_BEGIN)) { SetThreadPriority(GetCurrentThread(), THREAD_PRIORITY_LOWEST); } The problem with this is that on Windows XP it will totally disrupt the system by using too much I/O. I have a plan for a ugly and shameful way of mitigating this problem, but that depends on me being able to determine if the current thread has low I/O priority or not. Now, I know I can store which thread priority I ended up setting, but the control flow in the program is not really well suited for this. I would rather like to be able to test later whether or not the current thread has low I/O priority -- if it is in "background mode". GetThreadPriority does not seem to give me this information. Is there any way to determine if the current thread has low I/O priority?

    Read the article

  • unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

    - by jon
    I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

    Read the article

  • High Linux loads on low CPU/memory usage

    - by user13323
    Hi. I have quite strange situation, where my CentOS 5.5 box loads are high, but the CPU and memory used are pretty low: top - 20:41:38 up 42 days, 6:14, 2 users, load average: 19.79, 21.25, 18.87 Tasks: 254 total, 1 running, 253 sleeping, 0 stopped, 0 zombie Cpu(s): 3.8%us, 0.3%sy, 0.1%ni, 95.0%id, 0.6%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 4035284k total, 4008084k used, 27200k free, 38748k buffers Swap: 4208928k total, 242576k used, 3966352k free, 1465008k cached free -mt total used free shared buffers cached Mem: 3940 3910 29 0 37 1427 -/+ buffers/cache: 2445 1495 Swap: 4110 236 3873 Total: 8050 4147 3903 Iostat also shows good results: avg-cpu: %user %nice %system %iowait %steal %idle 3.83 0.13 0.41 0.58 0.00 95.05 Here is the ps aux output: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 10348 80 ? Ss 2010 2:11 init [3] root 2 0.0 0.0 0 0 ? S< 2010 0:00 [migration/0] root 3 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/0] root 4 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/0] root 5 0.0 0.0 0 0 ? S< 2010 0:02 [migration/1] root 6 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/1] root 7 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/1] root 8 0.0 0.0 0 0 ? S< 2010 0:02 [migration/2] root 9 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/2] root 10 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/2] root 11 0.0 0.0 0 0 ? S< 2010 0:02 [migration/3] root 12 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/3] root 13 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/3] root 14 0.0 0.0 0 0 ? S< 2010 0:03 [migration/4] root 15 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/4] root 16 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/4] root 17 0.0 0.0 0 0 ? S< 2010 0:01 [migration/5] root 18 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/5] root 19 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/5] root 20 0.0 0.0 0 0 ? S< 2010 0:11 [migration/6] root 21 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/6] root 22 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/6] root 23 0.0 0.0 0 0 ? S< 2010 0:01 [migration/7] root 24 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/7] root 25 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/7] root 26 0.0 0.0 0 0 ? S< 2010 0:00 [migration/8] root 27 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/8] root 28 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/8] root 29 0.0 0.0 0 0 ? S< 2010 0:00 [migration/9] root 30 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/9] root 31 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/9] root 32 0.0 0.0 0 0 ? S< 2010 0:08 [migration/10] root 33 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/10] root 34 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/10] root 35 0.0 0.0 0 0 ? S< 2010 0:05 [migration/11] root 36 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/11] root 37 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/11] root 38 0.0 0.0 0 0 ? S< 2010 0:02 [migration/12] root 39 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/12] root 40 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/12] root 41 0.0 0.0 0 0 ? S< 2010 0:14 [migration/13] root 42 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/13] root 43 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/13] root 44 0.0 0.0 0 0 ? S< 2010 0:04 [migration/14] root 45 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/14] root 46 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/14] root 47 0.0 0.0 0 0 ? S< 2010 0:01 [migration/15] root 48 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/15] root 49 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/15] root 50 0.0 0.0 0 0 ? S< 2010 0:00 [events/0] root 51 0.0 0.0 0 0 ? S< 2010 0:00 [events/1] root 52 0.0 0.0 0 0 ? S< 2010 0:00 [events/2] root 53 0.0 0.0 0 0 ? S< 2010 0:00 [events/3] root 54 0.0 0.0 0 0 ? S< 2010 0:00 [events/4] root 55 0.0 0.0 0 0 ? S< 2010 0:00 [events/5] root 56 0.0 0.0 0 0 ? S< 2010 0:00 [events/6] root 57 0.0 0.0 0 0 ? S< 2010 0:00 [events/7] root 58 0.0 0.0 0 0 ? S< 2010 0:00 [events/8] root 59 0.0 0.0 0 0 ? S< 2010 0:00 [events/9] root 60 0.0 0.0 0 0 ? S< 2010 0:00 [events/10] root 61 0.0 0.0 0 0 ? S< 2010 0:00 [events/11] root 62 0.0 0.0 0 0 ? S< 2010 0:00 [events/12] root 63 0.0 0.0 0 0 ? S< 2010 0:00 [events/13] root 64 0.0 0.0 0 0 ? S< 2010 0:00 [events/14] root 65 0.0 0.0 0 0 ? S< 2010 0:00 [events/15] root 66 0.0 0.0 0 0 ? S< 2010 0:00 [khelper] root 107 0.0 0.0 0 0 ? S< 2010 0:00 [kthread] root 126 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/0] root 127 0.0 0.0 0 0 ? S< 2010 0:03 [kblockd/1] root 128 0.0 0.0 0 0 ? S< 2010 0:01 [kblockd/2] root 129 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/3] root 130 0.0 0.0 0 0 ? S< 2010 0:05 [kblockd/4] root 131 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/5] root 132 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/6] root 133 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/7] root 134 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/8] root 135 0.0 0.0 0 0 ? S< 2010 0:02 [kblockd/9] root 136 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/10] root 137 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/11] root 138 0.0 0.0 0 0 ? S< 2010 0:04 [kblockd/12] root 139 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/13] root 140 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/14] root 141 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/15] root 142 0.0 0.0 0 0 ? S< 2010 0:00 [kacpid] root 281 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/0] root 282 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/1] root 283 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/2] root 284 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/3] root 285 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/4] root 286 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/5] root 287 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/6] root 288 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/7] root 289 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/8] root 290 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/9] root 291 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/10] root 292 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/11] root 293 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/12] root 294 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/13] root 295 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/14] root 296 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/15] root 299 0.0 0.0 0 0 ? S< 2010 0:00 [khubd] root 301 0.0 0.0 0 0 ? S< 2010 0:00 [kseriod] root 490 0.0 0.0 0 0 ? S 2010 0:00 [khungtaskd] root 493 0.1 0.0 0 0 ? S< 2010 94:48 [kswapd1] root 494 0.0 0.0 0 0 ? S< 2010 0:00 [aio/0] root 495 0.0 0.0 0 0 ? S< 2010 0:00 [aio/1] root 496 0.0 0.0 0 0 ? S< 2010 0:00 [aio/2] root 497 0.0 0.0 0 0 ? S< 2010 0:00 [aio/3] root 498 0.0 0.0 0 0 ? S< 2010 0:00 [aio/4] root 499 0.0 0.0 0 0 ? S< 2010 0:00 [aio/5] root 500 0.0 0.0 0 0 ? S< 2010 0:00 [aio/6] root 501 0.0 0.0 0 0 ? S< 2010 0:00 [aio/7] root 502 0.0 0.0 0 0 ? S< 2010 0:00 [aio/8] root 503 0.0 0.0 0 0 ? S< 2010 0:00 [aio/9] root 504 0.0 0.0 0 0 ? S< 2010 0:00 [aio/10] root 505 0.0 0.0 0 0 ? S< 2010 0:00 [aio/11] root 506 0.0 0.0 0 0 ? S< 2010 0:00 [aio/12] root 507 0.0 0.0 0 0 ? S< 2010 0:00 [aio/13] root 508 0.0 0.0 0 0 ? S< 2010 0:00 [aio/14] root 509 0.0 0.0 0 0 ? S< 2010 0:00 [aio/15] root 665 0.0 0.0 0 0 ? S< 2010 0:00 [kpsmoused] root 808 0.0 0.0 0 0 ? S< 2010 0:00 [ata/0] root 809 0.0 0.0 0 0 ? S< 2010 0:00 [ata/1] root 810 0.0 0.0 0 0 ? S< 2010 0:00 [ata/2] root 811 0.0 0.0 0 0 ? S< 2010 0:00 [ata/3] root 812 0.0 0.0 0 0 ? S< 2010 0:00 [ata/4] root 813 0.0 0.0 0 0 ? S< 2010 0:00 [ata/5] root 814 0.0 0.0 0 0 ? S< 2010 0:00 [ata/6] root 815 0.0 0.0 0 0 ? S< 2010 0:00 [ata/7] root 816 0.0 0.0 0 0 ? S< 2010 0:00 [ata/8] root 817 0.0 0.0 0 0 ? S< 2010 0:00 [ata/9] root 818 0.0 0.0 0 0 ? S< 2010 0:00 [ata/10] root 819 0.0 0.0 0 0 ? S< 2010 0:00 [ata/11] root 820 0.0 0.0 0 0 ? S< 2010 0:00 [ata/12] root 821 0.0 0.0 0 0 ? S< 2010 0:00 [ata/13] root 822 0.0 0.0 0 0 ? S< 2010 0:00 [ata/14] root 823 0.0 0.0 0 0 ? S< 2010 0:00 [ata/15] root 824 0.0 0.0 0 0 ? S< 2010 0:00 [ata_aux] root 842 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_0] root 843 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_1] root 844 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_2] root 845 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_3] root 846 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_4] root 847 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_5] root 882 0.0 0.0 0 0 ? S< 2010 0:00 [kstriped] root 951 0.0 0.0 0 0 ? S< 2010 4:24 [kjournald] root 976 0.0 0.0 0 0 ? S< 2010 0:00 [kauditd] postfix 990 0.0 0.0 54208 2284 ? S 21:19 0:00 pickup -l -t fifo -u root 1013 0.0 0.0 12676 8 ? S<s 2010 0:00 /sbin/udevd -d root 1326 0.0 0.0 90900 3400 ? Ss 14:53 0:00 sshd: root@notty root 1410 0.0 0.0 53972 2108 ? Ss 14:53 0:00 /usr/libexec/openssh/sftp-server root 2690 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/0] root 2691 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/1] root 2692 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/2] root 2693 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/3] root 2694 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/4] root 2695 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/5] root 2696 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/6] root 2697 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/7] root 2698 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/8] root 2699 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/9] root 2700 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/10] root 2701 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/11] root 2702 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/12] root 2703 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/13] root 2704 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/14] root 2705 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/15] root 2706 0.0 0.0 0 0 ? S< 2010 0:00 [kmpath_handlerd] root 2755 0.0 0.0 0 0 ? S< 2010 4:35 [kjournald] root 2757 0.0 0.0 0 0 ? S< 2010 3:38 [kjournald] root 2759 0.0 0.0 0 0 ? S< 2010 4:10 [kjournald] root 2761 0.0 0.0 0 0 ? S< 2010 4:26 [kjournald] root 2763 0.0 0.0 0 0 ? S< 2010 3:15 [kjournald] root 2765 0.0 0.0 0 0 ? S< 2010 3:04 [kjournald] root 2767 0.0 0.0 0 0 ? S< 2010 3:02 [kjournald] root 2769 0.0 0.0 0 0 ? S< 2010 2:58 [kjournald] root 2771 0.0 0.0 0 0 ? S< 2010 0:00 [kjournald] root 3340 0.0 0.0 5908 356 ? Ss 2010 2:48 syslogd -m 0 root 3343 0.0 0.0 3804 212 ? Ss 2010 0:03 klogd -x root 3430 0.0 0.0 0 0 ? S< 2010 0:50 [kondemand/0] root 3431 0.0 0.0 0 0 ? S< 2010 0:54 [kondemand/1] root 3432 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/2] root 3433 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/3] root 3434 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/4] root 3435 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/5] root 3436 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/6] root 3437 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/7] root 3438 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/8] root 3439 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/9] root 3440 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/10] root 3441 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/11] root 3442 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/12] root 3443 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/13] root 3444 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/14] root 3445 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/15] root 3461 0.0 0.0 10760 284 ? Ss 2010 3:44 irqbalance rpc 3481 0.0 0.0 8052 4 ? Ss 2010 0:00 portmap root 3526 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/0] root 3527 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/1] root 3528 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/2] root 3529 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/3] root 3530 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/4] root 3531 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/5] root 3532 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/6] root 3533 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/7] root 3534 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/8] root 3535 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/9] root 3536 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/10] root 3537 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/11] root 3538 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/12] root 3539 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/13] root 3540 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/14] root 3541 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/15] root 3563 0.0 0.0 10160 8 ? Ss 2010 0:00 rpc.statd root 3595 0.0 0.0 55180 4 ? Ss 2010 0:00 rpc.idmapd dbus 3618 0.0 0.0 21256 28 ? Ss 2010 0:00 dbus-daemon --system root 3649 0.2 0.4 563084 18796 ? S<sl 2010 179:03 mfsmount /mnt/mfs -o rw,mfsmaster=web1.ovs.local root 3702 0.0 0.0 3800 8 ? Ss 2010 0:00 /usr/sbin/acpid 68 3715 0.0 0.0 31312 816 ? Ss 2010 3:14 hald root 3716 0.0 0.0 21692 28 ? S 2010 0:00 hald-runner 68 3726 0.0 0.0 12324 8 ? S 2010 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket 68 3730 0.0 0.0 12324 8 ? S 2010 0:00 hald-addon-keyboard: listening on /dev/input/event0 root 3773 0.0 0.0 62608 332 ? Ss 2010 0:00 /usr/sbin/sshd ganglia 3786 0.0 0.0 24704 988 ? Ss 2010 14:26 /usr/sbin/gmond root 3843 0.0 0.0 54144 300 ? Ss 2010 1:49 /usr/libexec/postfix/master postfix 3855 0.0 0.0 54860 1060 ? S 2010 0:22 qmgr -l -t fifo -u root 3877 0.0 0.0 74828 708 ? Ss 2010 1:15 crond root 3891 1.4 1.9 326960 77704 ? S<l 2010 896:59 mfschunkserver root 4122 0.0 0.0 18732 176 ? Ss 2010 0:10 /usr/sbin/atd root 4193 0.0 0.8 129180 35984 ? Ssl 2010 11:04 /usr/bin/ruby /usr/sbin/puppetd root 4223 0.0 0.0 18416 172 ? S 2010 0:10 /usr/sbin/smartd -q never root 4227 0.0 0.0 3792 8 tty1 Ss+ 2010 0:00 /sbin/mingetty tty1 root 4230 0.0 0.0 3792 8 tty2 Ss+ 2010 0:00 /sbin/mingetty tty2 root 4231 0.0 0.0 3792 8 tty3 Ss+ 2010 0:00 /sbin/mingetty tty3 root 4233 0.0 0.0 3792 8 tty4 Ss+ 2010 0:00 /sbin/mingetty tty4 root 4234 0.0 0.0 3792 8 tty5 Ss+ 2010 0:00 /sbin/mingetty tty5 root 4236 0.0 0.0 3792 8 tty6 Ss+ 2010 0:00 /sbin/mingetty tty6 root 5596 0.0 0.0 19368 20 ? Ss 2010 0:00 DarwinStreamingServer qtss 5597 0.8 0.9 166572 37408 ? Sl 2010 523:02 DarwinStreamingServer root 8714 0.0 0.0 0 0 ? S Jan31 0:33 [pdflush] root 9914 0.0 0.0 65612 968 pts/1 R+ 21:49 0:00 ps aux root 10765 0.0 0.0 76792 1080 ? Ss Jan24 0:58 SCREEN root 10766 0.0 0.0 66212 872 pts/3 Ss Jan24 0:00 /bin/bash root 11833 0.0 0.0 63852 1060 pts/3 S+ 17:17 0:00 /bin/sh ./launch.sh root 11834 437 42.9 4126884 1733348 pts/3 Sl+ 17:17 1190:50 /usr/bin/java -Xms128m -Xmx512m -XX:+UseConcMarkSweepGC -jar /JavaCore/JavaCore.jar root 13127 4.7 1.1 110564 46876 ? Ssl 17:18 12:55 /JavaCore/fetcher.bin root 19392 0.0 0.0 90108 3336 ? Rs 20:35 0:00 sshd: root@pts/1 root 19401 0.0 0.0 66216 1640 pts/1 Ss 20:35 0:00 -bash root 20567 0.0 0.0 90108 412 ? Ss Jan16 1:58 sshd: root@pts/0 root 20569 0.0 0.0 66084 912 pts/0 Ss Jan16 0:00 -bash root 21053 0.0 0.0 63856 28 ? S Jan30 0:00 /bin/sh /usr/bin/WowzaMediaServerd /usr/local/WowzaMediaServer/bin/setenv.sh /var/run/WowzaM root 21054 2.9 10.3 2252652 418468 ? Sl Jan30 314:25 java -Xmx1200M -server -Djava.net.preferIPv4Stack=true -Dcom.sun.management.jmxremote=true - root 21915 0.0 0.0 0 0 ? S Feb01 0:00 [pdflush] root 29996 0.0 0.0 76524 1004 pts/0 S+ 14:41 0:00 screen -x Any idea what could this be, or where I should look for more diagnostic information? Thanks.

    Read the article

  • A good interpreted language for a small embedded project

    - by Earlz
    I have an mbed which has a small ARM Cortex M3 on it. Basically, my effective resources for the project are ~25Kb of RAM and ~400Kb of Flash. For I/O I'll have a PS/2 keyboard, a VGA framebuffer(with character output), and an SD card for saving/loading programs(up to a couple of Mb maybe) The reason I ask this here is because I'm trying to figure out what programming language to implement on the thing. I'm looking for an interpreted language that's easy for me to implement, and won't break the bank on my resources. I also intend for this to be at least possible to write on th device itself, though the editor can be interpreted(yay bootstrapping) Anyway, I've looked at a few simple languages. Some nice candidates: Forth BASIC Scheme? Has anyone done something like this or know of any languages that can fit this bill or have comments about my three candidates so far?

    Read the article

  • What Are Some Advantages/Disadvantages of Using C over Assembly?

    - by Daniel
    I'm currently studying engineering in Telecommunications and Electronics and we have migrated from assembler to C in microprocessor programming. I have doubts that this is a good idea. What are some advantages and disadvantages of C compared to assembly? The advantages/disadvantages I see are: Advantages: I can tell that C syntax is a lot easier to learn than Assembler syntax. C is easier to use for making more complex programs. Learning C is somehow more productive than learning assembler cause there is more developing stuff around C than Assembler. Disadvantages: Assembler is a lower level programming language than C,so this makes it a good for programming directly to hardware. Is a lot more flexible alluding you to work with memory,interrupts,micro-registers,etc.

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >