Search Results

Search found 7396 results on 296 pages for 'ms dos'.

Page 9/296 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• Airport Express chokes Wi-Fi for a few seconds, several times per hour. Any idea why?

  - by user13727

  I'm using a MacBookPro connected to an AiportExpress' Wi-FI network. Every once in a while, the Wi-Fi will choke up and either drop some packets, or lag horribly for several seconds. I'm losing hair over this because every time I chat on Skype, the call hangs randomly due to this problem. Any idea what's wrong? Some more details: two networks are set up: 2.4Ghz and 5Ghz, and the issue happens on both the network uses WPA2 Personal for security the Airport is in the same room with my computer the Airport is fairly new, bought this summer, model number off the back: A1392 tried connecting to a neighbours wifi to see if it's a problem with my computer, or interference. It's not, it doesn't happen on their network. tried resetting it several times tried changing channels manually Ping results are below, so you can see what I'm talking about. EDIT: 10.0.1.1 is the Airport's IP 64 bytes from 10.0.1.1: icmp_seq=1795 ttl=255 time=0.813 ms 64 bytes from 10.0.1.1: icmp_seq=1796 ttl=255 time=3.335 ms 64 bytes from 10.0.1.1: icmp_seq=1797 ttl=255 time=3.403 ms 64 bytes from 10.0.1.1: icmp_seq=1798 ttl=255 time=3.414 ms 64 bytes from 10.0.1.1: icmp_seq=1799 ttl=255 time=3.227 ms 64 bytes from 10.0.1.1: icmp_seq=1800 ttl=255 time=3.274 ms 64 bytes from 10.0.1.1: icmp_seq=1801 ttl=255 time=3.253 ms 64 bytes from 10.0.1.1: icmp_seq=1802 ttl=255 time=3.292 ms >>>> choke starts <<< 64 bytes from 10.0.1.1: icmp_seq=1803 ttl=255 time=53.977 ms 64 bytes from 10.0.1.1: icmp_seq=1804 ttl=255 time=35.049 ms 64 bytes from 10.0.1.1: icmp_seq=1805 ttl=255 time=19.820 ms >>>> choke ends <<< 64 bytes from 10.0.1.1: icmp_seq=1806 ttl=255 time=0.716 ms 64 bytes from 10.0.1.1: icmp_seq=1807 ttl=255 time=0.705 ms 64 bytes from 10.0.1.1: icmp_seq=1808 ttl=255 time=0.919 ms 64 bytes from 10.0.1.1: icmp_seq=1809 ttl=255 time=0.659 ms 64 bytes from 10.0.1.1: icmp_seq=1810 ttl=255 time=0.877 ms 64 bytes from 10.0.1.1: icmp_seq=1811 ttl=255 time=0.679 ms 64 bytes from 10.0.1.1: icmp_seq=1812 ttl=255 time=0.854 ms 64 bytes from 10.0.1.1: icmp_seq=1813 ttl=255 time=0.644 ms 64 bytes from 10.0.1.1: icmp_seq=1814 ttl=255 time=3.779 ms ... time passes .. 64 bytes from 10.0.1.1: icmp_seq=1599 ttl=255 time=0.674 ms 64 bytes from 10.0.1.1: icmp_seq=1600 ttl=255 time=0.930 ms 64 bytes from 10.0.1.1: icmp_seq=1601 ttl=255 time=0.665 ms 64 bytes from 10.0.1.1: icmp_seq=1602 ttl=255 time=1.085 ms Request timeout for icmp_seq 1603 Request timeout for icmp_seq 1604 64 bytes from 10.0.1.1: icmp_seq=1605 ttl=255 time=104.969 ms 64 bytes from 10.0.1.1: icmp_seq=1606 ttl=255 time=11.521 ms 64 bytes from 10.0.1.1: icmp_seq=1607 ttl=255 time=0.926 ms 64 bytes from 10.0.1.1: icmp_seq=1608 ttl=255 time=0.993 ms 64 bytes from 10.0.1.1: icmp_seq=1609 ttl=255 time=0.745 ms And the Signal-Noise ratio:

  Read the article

• MS Query returns data inside itself but does not export it to Excel

  - by kappa

  Hi, I'm having a strange problem with Excel and MS Query: I'm using MS Query to run a T-SQL query against a Microsoft SQL Server 2000 and return the results to Excel. To do this, I open Excel, go to Data - Import external data - New database query, select my data source, paste the SQL script in MS Query and click File - Return data to Microsoft Office Excel, leaving all the query options to their defaults. This works fine for many other Excel files, but this time although MS Query shows the correct data when I paste the SQL script, after returning to Excel all I get is the query name in the upper left cell, with no data returned. I fear the cause could be the SQL script, as it contains some advanced functions like union all, UDFs and variables. Here's the script: declare @date smalldatetime set @date = dateadd(day, datediff(day, 0, getdate()), 0) select [date], sum([hours]) as [hours] from ( select [date], [hours] from [server].[dbo].[udf] (84, '2010-01-01', @date) union all select [date], [hours] from [server].[dbo].[udf] (89, '2010-01-01', @date) union all select [date], [hours] from [server].[dbo].[udf] (93, '2010-01-01', @date) ) as [a] group by [date] order by [date] asc I can't get rid of the UDF as inside them are done advanced groupings involving cursors and temporary tables, nor I can remove the variable as the UDF won't accept dateadd(day, datediff(day, 0, getdate()), 0) as parameter. Any ideas? Thanks in advance, Andrea.

  Read the article

• Traceroute, * at first router

  - by Jérôme

  When using traceroute on my mac to check the path to any website, the first line is always 3 stars. imac:~ Jerome$ traceroute google.com traceroute: Warning: google.com has multiple addresses; using 173.194.70.113 traceroute to google.com (173.194.70.113), 64 hops max, 52 byte packets 1 * * * 2 217-168-54-101.static.cablecom.ch (217.168.54.101) 9.515 ms 8.757 ms 10.104 ms 3 172.31.208.73 (172.31.208.73) 14.512 ms 14.605 ms 14.264 ms 4 ch-zrh01b-ra1-ae-1.aorta.net (84.116.134.142) 13.587 ms 12.892 ms 13.936 ms 5 74.125.49.101 (74.125.49.101) 13.966 ms 14.850 ms 14.915 ms 6 72.14.232.120 (72.14.232.120) 26.573 ms 72.14.232.88 (72.14.232.88) 20.072 ms 19.758 ms 7 72.14.236.68 (72.14.236.68) 26.913 ms 72.14.236.20 (72.14.236.20) 26.825 ms 72.14.239.62 (72.14.239.62) 25.381 ms 8 209.85.254.118 (209.85.254.118) 22.240 ms 22.365 ms 209.85.254.112 (209.85.254.112) 24.826 ms 9 * * * 10 fa-in-f113.1e100.net (173.194.70.113) 25.715 ms 26.960 ms 25.191 ms As far as I know, * means no answer from the router. How come I have stars at the very first line ?

  Read the article

• Private IP getting routed over Internet

  - by WernerCD

  We are setting up an internal program, on an internal server that uses the private 172.30.x.x subnet... when we ping the address 172.30.138.2, it routes across the internet: C:\>tracert 172.30.138.2 Tracing route to 172.30.138.2 over a maximum of 30 hops 1 6 ms 1 ms 1 ms xxxx.xxxxxxxxxxxxxxx.org [192.168.28.1] 2 * * * Request timed out. 3 12 ms 13 ms 9 ms xxxxxxxxxxx.xxxxxx.xx.xxx.xxxxxxx.net [68.85.xx.xx] 4 15 ms 11 ms 55 ms te-7-3-ar01.salisbury.md.bad.comcast.net [68.87.xx.xx] 5 13 ms 14 ms 18 ms xe-11-0-3-0-ar04.capitolhghts.md.bad.comcast.net [68.85.xx.xx] 6 19 ms 18 ms 14 ms te-1-0-0-4-cr01.denver.co.ibone.comcast.net [68.86.xx.xx] 7 28 ms 30 ms 30 ms pos-4-12-0-0-cr01.atlanta.ga.ibone.comcast.net [68.86.xx.xx] 8 30 ms 43 ms 30 ms 68.86.xx.xx 9 30 ms 29 ms 31 ms 172.30.138.2 Trace complete. This has a number of us confused. If we had a VPN setup, it wouldn't show up as being routed across the internet. If it hit an internet server, Private IP's (such as 192.168) shouldn't get routed. What would let a private IP address get routed across servers? would the fact that it's all comcast mean that they have their routers setup wrong?

  Read the article

• How to list all files on all hard drives with output in MS-DOS batch?

  - by Leandro

  How can I list all files (including system and hidden) on all hard drives (not removable drives)? I think in something like a: dir -a -h *.* /s > file.txt but this is for the specific drive where I'm. How can I do something like that but with C:, D:, etc, but I don't know the DOS's name of the drivers, and i need a .bat to do this (an automatic listing). Implementer can't also know the names of drivers.

  Read the article

• Windows XP running as OpenSSH server through cygwin. Can I remotely execute MS-DOS commands?

  - by user14383

  I tried typing cmd or cmd.exe at the bash line which then takes to the DOS shell. But from there I tried executing something like trial.bat which contains some lines to access a series of executable commands, but to no avail. Is this the correct way to go about it? Thanks ~

  Read the article

• Linux based MS Office thumbnail generation

  - by El Yobo

  I've been taken on board to work on a PHP based web application. One part of the application generates thumbnail images for MS Office documents on demand, and it uses MS Office + the VeryPDF docprint utility to do this. Because of this one requirement, the system is running on Windows Server 2003 + IIS. I would prefer to have the system running on a Linux server, rather than MS, as I have far more experience in administering Linux systems than Windows and we have no other in-house technical staff. Does anyone know a way to handle the document conversion using native Linux software? I would love something PHP native, but am willing to look outside that if necessary. Thanks for your suggestions.

  Read the article

• DOS application to allow remote management of files over serial link

  - by tomlogic

  Harken back to the days of DOS. I have an embedded DOS handheld device, and I'm looking for a tool to manage the files stored on it. I picture an application I can launch on the device that opens COM1 up for commands to get a directory listing, send/receive files via x/y/zmodem, move/delete files, and create/move/delete directories. A Windows application can then download a recursive file listing and then manage those files (for example, synchronizing with a local directory). Keep in mind that this is DOS -- 8.3 filenames, 640K of RAM and a 19200bps serial link (yuk!). I'd prefer something with source in case we need to add additional features (for example, the ability to get a checksum of a file for change detection). Now that I've written this description, I realize I'm asking for something like LapLink or pcAnywhere. Norton no longer sells DOS versions of pcAnywhere and LapLink V for DOS seems pricy at $50. Are you aware of any similar apps from those good old days?

  Read the article

• SQL Azure Security: DoS Part II

  - by Herve Roggero

  Ah!  When you shoot yourself in the foot... a few times... it hurts! That's what I did on Sunday, to learn more about the behavior of the SQL Azure Denial Of Service prevention feature. This article is a short follow up to my last post on this feature. In this post, I will outline some of the lessons learned that were the result of testing the behavior of SQL Azure from two machines. From the standpoint of SQL Azure, they look like one machine since they are behind a NAT. All logins affected The first thing to note is that all the logins are affected. If you lock yourself out to a specific database, none of the logins will work on that database. In fact the database size becomes "--" in the SQL Azure Portal.   Less than 100 sessions I was able to see 50+ sessions being made in SQL Azure (by looking at sys.dm_exec_sessions) before being locked out. The the DoS feature appears to be triggered in part by the number of open sessions. I could not determine if the lockout is triggered by the speed at which connection requests are made however.   Other Databases Unaffected This was interesting... the DoS feature works at the database level. Other databases were available for me to use.   Just Wait Initially I thought that going through SQL Azure and connecting from there would reset the database and allow me to connect again. Unfortunately this doesn't seem to be the case. You will have to wait. And the more you lock yourself out, the more you will have to wait... The first time the database became available again within 30 seconds or so; the second time within 2-3 minutes and the third time... within 2-3 hours...   Successful Logins The DoS feature appears to engage only for valid logins. If you have a login failure, it doesn't seem to count. I ran a test with over 100 login failures without being locked.

  Read the article

• How to display Extended ASCII in a DOS Console

  This demo shows how to display ASCII graphics ( Above 127 Characters ) in a DOS ( Windows ) Console from a text File.

  Read the article

• MS Access Premiere Products Exercise

  - by rynwtts

  I am working with Microsoft Access, Premiere Products Exercises for a college course. I can't seem to get past a specific question. We are working with DBDL and E-R Diagrams. The question is here. Indicate the changes you need to make to the design of the Premiere Products database to support the following situation. A customer is not necessarily represented by a single sales rep but can be represented by several sales reps. when a customer places an order, the sales rep who gets the commission on the order must be one of the collection of sales reps who represents the customer. In the database already each customer is represented by a sales rep. Which yields a one to one relationship. I need to enable a customer to have several sales reps, and make it so that only those sales rep will be eligible for commission upon each order.

  Read the article

• How to change ms office 2010 beta key

  - by user23950

  I have installed office 2010, using a key that I found on forums on the internet. It said it was used to many times already. But when I try to use the mak key that is on my account, it says that it is invalid. How do I change the key, if a key is still installed and is available for 30 days.

  Read the article

• MS Office Communicator: Long delays in setting up audio connection when starting a call

  - by geofftnz

  I am using Microsoft Office Communicator with a USB headset as my work phone. OCS is connected to our PABX so we can take and make calls to regular, non-OCS phones. When making an external call to a cellphone, it can take up to 5-10 seconds for audio to start flowing. eg: Work Phone Cellphone - dial cellphone (ringing) (ringing) answer cellphone (hearing nothing) speak "1" . speak "2" . speak "3" . ... . speak "14" hear "15" speak "15" hear "16" speak "16" Has anyone experienced this kind of thing with an OCS setup? Any pointers?

  Read the article

• Does MS Forefront TMG cache authentication?

  - by SnOrfus

  I'm testing a client machine that makes requests to a biztalk server using a forefront machine as a web proxy. Upon first test I put in an invalid name/password into the receive port and received the correct error message (407). Then, I set the correct name/password and everything worked correctly. From there, I kept the correct information in the receive port but put an invalid name/password into the send adapter but the process completed successfully (should have failed with 407). I've ensured that both the recieve and send ports are not bypassing the proxy for local addresses. So the only thing that seems to make sense is if TMG is caching the authentication request coming from the machine I'm working on. Is this thinking correct, and if so, does anyone know how to disable it in TMG?

  Read the article

• MS Word - Keeps requesting user to save Normal template

  - by MikeT505

  We have Small Business Server 2008 setup on a couple of our clients networks and we have the following issue. Whenever they logon, Microsoft word automatically opens and requests them to save their changes to the template 'Normal'. It constantly happens, we have a mixture of Win 2000 and XP machines and it seems to happen more often on XP than 2000. Any idea why this might be happening and how we can resolve it, it's just frustrating for the end users. PS: This is happening on Office 2000 and Office 2003.

  Read the article

• MS Word reports files read-only on Win Server 2003 file server

  - by Larry Hamelin

  I'm not a sysadmin, but I play one on TV: I'm trying to fix a problem for my mom's tiny non-profit company's server. I set up a Windows Server 2003 machine as a domain controller and file server. Everything has been working well for a few months, but lately when she tries to save changes to a Word (Office XP) document stored on the server, Word will intermittently report that the file is read-only. Saving to an alternate file in the same directory works, and when she closes Word and re-opens the original document, it'll save changes just fine. No one else ever has these files open. I've checked security and share permissions, and everything's OK. We've tried rebooting the server, but the problem continues, but intermittently. I have no clue what's going on. Help!

  Read the article

• Migrate reports from MS Access to OOo Base

  - by John Gardeniers

  I'm currently looking at upgrading our office machines from Office XP to Office 2010. For most users the standard edition is fine but just a few of us use Access. There are only a couple of standalone Access databases but the program is used fairly extensively (mostly by myself) as a front end to MySQL. As the cost different between standard and pro versions of Office 2010 is about $170 (AUD) I'm looking at possible alternatives to Access. I'm no huge fan of Open Office but could be convinced to use it if I can find a way to migrate the many reports we currently have in Access. The data is not a problem. So far I've found nothing to suggest this is even possible/practical but perhaps someone here knows otherwise. I'm also open to suggestions for other alternatives to Access but it must be able to produce flexible reports easily. That is the one real strength of Access in my view. Because of its subjective nature I'm making this community wiki.

  Read the article

• MS Publisher 2003 - hangs when saving to desktop

  - by Chris

  We have a win 7 home prem pc, amd cpu, 8G ram, plenty of free disk space. Whenever user is working in publisher 20003, and tries to save a publisher 2003 document to the desktop, the save as dialog hangs and takes 2-3 minutes to display the desktop save location. I've tested excel 2003, it has no problems immediately displaying the desktop save as location and saving the file.

  Read the article

• MS Publisher 2003 - hangs when saving to desktop

  - by Chris

  We have a win 7 home prem pc, amd cpu, 8G ram, plenty of free disk space. Whenever user is working in publisher 20003, and tries to save a publisher 2003 document to the desktop, the save as dialog hangs and takes 2-3 minutes to display the desktop save location. I've tested excel 2003, it has no problems immediately displaying the desktop save as location and saving the file.

  Read the article

• Parsing an MS Project 2007 xml project file.

  - by fred-22

  Has anyone got any idea how to read the XML file saved by MS Project 2007? The standard binary format is .MPP but I'd like to view a project in a different viewer. I've saved the project spec as XML and the viewer I'm using needs the parent task Id for each task. Where can i find that in the rather huge amount of XML data created by ms project?

  Read the article

• How to use sqlite from MS Access ?

  - by Phong

  I would like to use sqlite inside MS Access in order to use (transfer would be good enough) the content of sqlite database table in MS-Access. How can this be done in VBA ?

  Read the article

• hibernate configuration property file MS Access database

  - by GK

  Hi all, I have MS Access database and i want to use hibernate as a persistent layer for my application. So needed a sample hibernate config file entries for MS Access database. Thanks

  Read the article

• Strip OLE header information (MS Access / SQL Server)

  - by crimson13

  I have a C++ application that needs to support binary database content (images, etc). When using MS Access or MS SQL Server this data is wrapped inside an OLE object. How do I strip this OLE header information? Note that I can't just look for the beginning of a specific tag as the content can be png, jpg and a whole heap of other formats. Should I use something like COleDataObject?

  Read the article

• synchronize ms access and mySQL in different host

  - by Margareth

  Hi, Would like to ask is there any way to synchronize Ms Access and mySQL but are hosted in different hosting. If I update the Ms Access, the mySQL database in different Host is updated automatically. Thank you.

  Read the article

• Truncated MySQL field when connections from MS Access

  - by PNG Programmer

  I have created a linked table to a MySQL table in MS Access 2003. I used the the mysql-connector-odbc-5.1.6-win32 driver I found on the MySQL site. When I view the table I can only see 70 characters in a VARCHAR(255) field. Has anybody had any luck using MySQL from MS Access?

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >