Search Results

Search found 407 results on 17 pages for 'purge'.

Page 9/17 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • NVIDIA GFORCE 610M drivers

    - by thefinn93
    I'm attempting to install drivers for my GFORCE 610M and none of the solutions seems to work. Generally people recommend using the jockey-gtk program, which doesn't detect the card and states that there's no propitiatory drivers to install. I tried download the official binary from the NVIDIA site, but that told me that I had to remove the Nouveau kernal driver, so I did that, following the instructions on the wiki (apt-get remove --purge xorg-something or other) and ignoring the "DON'T DO THIS" warning, after that didn't do anything i installed various packages (nvidia-common, nvidia-settings, etc) and eventually got the nvidia-settings program (and a very low screen resolution). Unfortunately when I open nvidia-settings it tells me to run nvidia-xconfig as root (i've done this several times, but to no avail) and doesn't let me configure anything. At this point I tried re-running the binary installer i downloaded from nvidia's site, and it said it worked but it didn't change a thing. So I'm out of ideas, what've you got?

    Read the article

  • Ubuntu 12.04 Nvidia GTX 460 video card installation

    - by aczietlow
    Currently testing Ubuntu 12.04 x64 for our development team. After upgrading from 11.10 I've been having video card issues. I'm using Nvidia GeForce GTX 460. When ever I try to launch Nvidia X server I get the following error message. You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. I've tried running sudo nvidia-xconfig multiple times and rebooting with no success. I've also tried getting the nvidia-current driver from the x-swat repo sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current Followed again by a reboot did nothing for me but knock my resolution down to 800x600 Finally I've tried sudo apt-get purge xserver-xorg sudo apt-get update sudo apt-get install xserver-xorg xserver-xorg-video-all sudo reboot Does anyone have any thoughts or directions they could point me in? To the best of my understanding my video card is suppose to be supported.

    Read the article

  • Pylibmc requiring libmemcached >= 0.32

    - by resopollution
    On Ubuntu, I installed libmemcached-dev using the following command: apt-get install libmemcached-dev Unfortunately it installs libmemcached version 0.31, and pylibmc requires that I compile with v 0.32+ to run, otherwise I get an import error. I've tried removing libmemcached-dev with apt-get --purge remove, then installing libmemcached v 0.38, then re-compiling pylibmc, but it still gives me the requires libmemcached v 0.32+ error.

    Read the article

  • ColdFusion Session Variables

    - by Faisal Abid
    Do the session variables in coldfusion expire or purge before the specified limit? Like say if the expiration is set to 24 hours, and the user only interacts with them for 10 minutes, do they expire if there not being used before the 24 hours?

    Read the article

  • Problems With Eclipse and Ruby Plugin

    - by Jesse J
    I installed Eclipse and then the Ruby Development Tools (RDT), but it would crash when I try to alter certain features, like having line numbers, how far back to have history, and the code coloring scheme didn't work fully. I decided to try to uninstall Eclipse by doing sudo aptitude remove eclipse and then sudo aptitude install eclipse but instead it installed it back with the broken Ruby plugin. I also tried aptitude purge but that didn't help either. How can I freshly reinstall eclipse and get a properly working Ruby plugin?

    Read the article

  • Problems Installing Eclipse and Ruby Plugin

    - by Jesse J
    I installed Eclipse on my Ubuntu machine and then the Ruby Development Tools (RDT), but it would crash when I try to alter certain features, like having line numbers, how far back to have history, and the code coloring scheme didn't work fully. I decided to try to uninstall Eclipse by doing sudo aptitude remove Eclipse and then sudo aptitude install eclipse but instead it installed it back with the broken Ruby plugin. I also tried aptitude purge but that didn't help either. How can I freshly reinstall Eclipse and get a properly working Ruby plugin?

    Read the article

  • What time/date do you stamp your deployed data/exe files when they appear on the target system?

    - by Brian Frost
    It seems a good and clean thing to ensure that your deployed files appear on the target system with a consistent time/date. Many Applications seem to do this but other than for care of overwriting Users' existing data I guess it has no real significance. I'm having a purge on my installer packaging and I'd like to know if there any good reasons for specific date/time handling.

    Read the article

  • Broken cups installation on a ubuntu server 64

    - by user67046
    Hi, I am having trouble with an cups installation. It seems to be in a broken state. When i try to reinstall it it stalls, the same if i try to remove it completely. I am running the server version 64 bit of Ubuntu 10.10 with kernel Linux version 2.6.35-22-server. When i try to start the cups daemon with the following command sudo service cups start It just stays there and nothing happens. I have tried to remove it, to be able to reinstall it, with the following command sudo apt-get purge cups It finally stalls with the following message Removing cups ... After that nothing happens. The process tree for the apt-get command looks like this. 1404 1404 1404 ? 00:00:00 sshd 26495 26495 26495 ? 00:00:00 sshd 26581 26495 26495 ? 00:00:00 sshd 26582 26582 26582 pts/4 00:00:00 bash 27158 27158 26582 pts/4 00:00:00 apt-get 27172 27172 27172 pts/2 00:00:00 dpkg 27176 27172 27172 pts/2 00:00:00 cups.prerm 27178 27172 27172 pts/2 00:00:00 stop I have tried to leave the process running for a while to see if i get any error messages but without success. To get out of it I have to kill the processes. sudo dpkg --configure cups dpkg: error processing cups (--configure): package cups is already installed and configured Errors were encountered while processing: cups sudo dpkg --status cups Package: cups Status: purge ok installed Priority: optional Section: net Installed-Size: 8292 Maintainer: Ubuntu Developers <[email protected]> Architecture: amd64 Version: 1.4.4-6ubuntu2.3 Replaces: cupsddk-drivers (<< 1.4.0) Provides: cupsddk-drivers Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.7), libcups2 (>= 1.4.4-3~), libcupscgi1 (>= 1.4.2), libcupsdriver1 (>= 1.4.0), libcupsimage2 (>= 1.4.0), libcupsmime1 (>= 1.4.0), libcupsppdc1 (>= 1.4.0), libdbus-1-3 (>= 1.0.2), libgcc1 (>= 1:4.1.1), libgnutls26 (>= 2.7.14-0), libgssapi-krb5-2 (>= 1.8+dfsg), libijs-0.35, libkrb5-3 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), libpam0g (>= 0.99.7.1), libpaper1, libpoppler7, libslp1, libstdc++6 (>= 4.1.1), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4), debconf (>= 1.2.9) | debconf-2.0, upstart-job, poppler-utils (>= 0.12), procps, ghostscript, lsb-base (>= 3), cups-common (>= 1.4.4), cups-client (>= 1.4.4-6ubuntu2.3), ssl-cert (>= 1.0.11), adduser, bc, ttf-freefont, cups-ppdc Recommends: foomatic-filters (>= 4.0), cups-driver-gutenprint, ghostscript-cups Suggests: cups-bsd, foomatic-db-compressed-ppds | foomatic-db, hplip, xpdf-korean | xpdf-japanese | xpdf-chinese-traditional | xpdf-chinese-simplified, cups-pdf, smbclient (>= 3.0.9), udev Breaks: foomatic-filters (<< 4.0) Conflicts: cupsddk-drivers (<< 1.4.0) Conffiles: /etc/fonts/conf.d/99pdftoopvp.conf a5221cfad70a981c80864229ef56586d /etc/logrotate.d/cups 5bb41fa9900f0d1c565954405a2bd7c4 /etc/default/cups 2b436fbb1a32b82b6aba45a76a1d7e40 /etc/pam.d/cups ff2488324854f7b1e892bb0df062d5f0 /etc/init/cups.conf 1a3cd022e8474e3d2b44640f33ce68e3 /etc/ufw/applications.d/cups 29e98a6d850da251e180c3d68dec2bd3 /etc/apparmor.d/usr.sbin.cupsd 60c4b26bfd5c033baa3dd48a3b2e9911 /etc/cups/cupsd.conf e2c7ec15835ea0939e5e86f7c6efcc03 /etc/cups/snmp.conf 2326a8af1e112676d55245bc5eb459ca /etc/cups/cupsd.conf.default a68d54d76021e857dd1d64edf57d36c5 Description: Common UNIX Printing System(tm) - server The Common UNIX Printing System (or CUPS(tm)) is a printing system and general replacement for lpd and the like. It supports the Internet Printing Protocol (IPP), and has its own filtering driver model for handling various document types. . This package provides the CUPS scheduler/daemon and related files. Original-Maintainer: Debian CUPS Maintainers <[email protected]> Would be greatful if someone could provide some help on how to solve this issue.

    Read the article

  • Windows can see Ubuntu Server printer, but can't print to it

    - by Mike
    I have an old desktop that I'm trying to set up as a home backup/print server. Backup was trivial, but am having issues getting the printing to work. The printer is connected to the server running Ubuntu Server 9.10 (no gui). If I access the printer via http://hostname:631/printers/, I am able to print a test page, so I know the printer is working; however, I am having no luck from Windows. Windows can see the printer when browsed via \hostname\, but I am unable to connect. Windows says "Windows cannot connect to the printer" without indicating why. Any suggestions? From /etc/samba/smb.conf: [global] workgroup = WORKGROUP dns proxy = no security = user username map = /etc/samba/smbusers encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user load printers = yes printing = cups printcap name = cups [printers] comment = All Printers browseable = no path = /var/spool/samba writable = no printable = yes guest ok = yes read only = yes create mask = 0700 [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = yes From /etc/cups/cupsd.conf: LogLevel warn SystemGroup lpadmin Port 631 Listen /var/run/cups/cups.sock Browsing On BrowseOrder allow,deny BrowseAllow all BrowseRemoteProtocols CUPS BrowseAddress @LOCAL BrowseLocalProtocols CUPS dnssd DefaultAuthType Basic <Location /> Order allow,deny Allow all </Location> <Location /admin> Order allow,deny Allow all </Location> <Location /admin/conf> AuthType Default Require user @SYSTEM Order allow,deny Allow all </Location> <Policy default> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document> Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices> AuthType Default Require user @SYSTEM Order deny,allow </Limit> <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> <Limit CUPS-Authenticate-Job> Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy> <Policy authenticated> <Limit Create-Job Print-Job Print-URI> AuthType Default Order deny,allow </Limit> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default> AuthType Default Require user @SYSTEM Order deny,allow </Limit> <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> <Limit Cancel-Job CUPS-Authenticate-Job> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy>

    Read the article

  • Reinstall Postfix

    - by Kevin
    I tried to reinstall Postfix, but I get this bunch of errors: root@***:/etc/init.d# sudo apt-get install -f postfix Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: procmail postfix-mysql postfix-pgsql postfix-ldap postfix-pcre resolvconf postfix-cdb mail-reader The following NEW packages will be installed: postfix 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/1,389kB of archives. After this operation, 3,531kB of additional disk space will be used. Preconfiguring packages ... Selecting previously deselected package postfix. (Reading database ... 56122 files and directories currently installed.) Unpacking postfix (from .../postfix_2.7.1-1ubuntu0.1_amd64.deb) ... Processing triggers for ureadahead ... Processing triggers for ufw ... Processing triggers for man-db ... Setting up postfix (2.7.1-1ubuntu0.1) ... Configuration file `/etc/init.d/postfix' ==> File on system created by you or by a script. ==> File also in package provided by package maintainer. What would you like to do about it ? Your options are: Y or I : install the package maintainer's version N or O : keep your currently-installed version D : show the differences between the versions Z : start a shell to examine the situation The default action is to keep your current version. *** postfix (Y/I/N/O/D/Z) [default=N] ? Y Installing new version of config file /etc/init.d/postfix ... Adding group `postfix' (GID 109) ... Done. Adding system user `postfix' (UID 106) ... Adding new user `postfix' (UID 106) with group `postfix' ... Not creating home directory `/var/spool/postfix'. Creating /etc/postfix/dynamicmaps.cf Adding tcp map entry to /etc/postfix/dynamicmaps.cf Adding group `postdrop' (GID 115) ... Done. setting myhostname: ***.net setting alias maps setting alias database setting myorigin setting destinations: ***.net, localhost.***.net, , localhost setting relayhost: setting mynetworks: 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 setting mailbox_size_limit: 0 setting recipient_delimiter: + setting inet_interfaces: all Postfix is now set up with a default configuration. If you need to make changes, edit /etc/postfix/main.cf (and others) as needed. To view Postfix configuration values, see postconf(1). After modifying main.cf, be sure to run '/etc/init.d/postfix reload'. Running newaliases postalias: fatal: /etc/mailname: cannot open file: Permission denied dpkg: error processing postfix (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: postfix E: Sub-process /usr/bin/dpkg returned an error code (1) I tried aptitude purge, remove, autoclean and all of dpkg options (configure, remove, purge) but nothing did the trick. /etc/mailname exists (0644 root:root) with as content *.net (fetched from hostname). What am I doing wrong?

    Read the article

  • duplicate cache pages: Varnish

    - by Sukhjinder Singh
    Recently we have configured Varnish on our server, it was successfully setup but we noticed that if we open any page in multiple browsers, the Varnish send request to Apache not matter page is cached or not. If we refresh twice on each browser it creates duplicate copies of the same page. What exactly should happen: If any page is cached by Varnish, the subsequent request should be served from Varnish itself when we are opening the same page in browser OR we are opening that page from different IP address. Following is my default.vcl file backend default { .host = "127.0.0.1"; .port = "80"; } sub vcl_recv { if( req.url ~ "^/search/.*$") { }else { set req.url = regsub(req.url, "\?.*", ""); } if (req.restarts == 0) { if (req.http.x-forwarded-for) { set req.http.X-Forwarded-For = req.http.X-Forwarded-For + ", " + client.ip; } else { set req.http.X-Forwarded-For = client.ip; } } if (!req.backend.healthy) { unset req.http.Cookie; } set req.grace = 6h; if (req.url ~ "^/status\.php$" || req.url ~ "^/update\.php$" || req.url ~ "^/admin$" || req.url ~ "^/admin/.*$" || req.url ~ "^/flag/.*$" || req.url ~ "^.*/ajax/.*$" || req.url ~ "^.*/ahah/.*$") { return (pass); } if (req.url ~ "(?i)\.(pdf|asc|dat|txt|doc|xls|ppt|tgz|csv|png|gif|jpeg|jpg|ico|swf|css|js)(\?.*)?$") { unset req.http.Cookie; } if (req.http.Cookie) { set req.http.Cookie = ";" + req.http.Cookie; set req.http.Cookie = regsuball(req.http.Cookie, "; +", ";"); set req.http.Cookie = regsuball(req.http.Cookie, ";(SESS[a-z0-9]+|SSESS[a-z0-9]+|NO_CACHE)=", "; \1="); set req.http.Cookie = regsuball(req.http.Cookie, ";[^ ][^;]*", ""); set req.http.Cookie = regsuball(req.http.Cookie, "^[; ]+|[; ]+$", ""); if (req.http.Cookie == "") { unset req.http.Cookie; } else { return (pass); } } if (req.request != "GET" && req.request != "HEAD" && req.request != "PUT" && req.request != "POST" && req.request != "TRACE" && req.request != "OPTIONS" && req.request != "DELETE") {return(pipe);} /* Non-RFC2616 or CONNECT which is weird. */ if (req.request != "GET" && req.request != "HEAD") { return (pass); } if (req.http.Accept-Encoding) { if (req.url ~ "\.(jpg|png|gif|gz|tgz|bz2|tbz|mp3|ogg)$") { # No point in compressing these remove req.http.Accept-Encoding; } else if (req.http.Accept-Encoding ~ "gzip") { set req.http.Accept-Encoding = "gzip"; } else if (req.http.Accept-Encoding ~ "deflate") { set req.http.Accept-Encoding = "deflate"; } else { # unknown algorithm remove req.http.Accept-Encoding; } } return (lookup); } sub vcl_deliver { if (obj.hits > 0) { set resp.http.X-Varnish-Cache = "HIT"; } else { set resp.http.X-Varnish-Cache = "MISS"; } } sub vcl_fetch { if (beresp.status == 404 || beresp.status == 301 || beresp.status == 500) { set beresp.ttl = 10m; } if (req.url ~ "(?i)\.(pdf|asc|dat|txt|doc|xls|ppt|tgz|csv|png|gif|jpeg|jpg|ico|swf|css|js)(\?.*)?$") { unset beresp.http.set-cookie; } set beresp.grace = 6h; } sub vcl_hash { hash_data(req.url); if (req.http.host) { hash_data(req.http.host); } else { hash_data(server.ip); } return (hash); } sub vcl_pipe { set req.http.connection = "close"; } sub vcl_hit { if (req.request == "PURGE") {ban_url(req.url); error 200 "Purged";} if (!obj.ttl > 0s) {return(pass);} } sub vcl_miss { if (req.request == "PURGE") {error 200 "Not in cache";} }

    Read the article

  • Networking Logs for MAC Addresses

    - by NetworkGuy
    I wanted to ask a multi-part question. Does Comcast Cable Internet services record MAC Addresses of the Router behind the cable modem. I know they record it for the modem itself. But is there a way for the Modem/Comcast to relay and keep logs of the MAC ID of the Router itself? Then does a windows operating system Log the MAC ID of the Router when its connected to it? If so where do I locate and purge this? Please let me know all areas where it is Logged within the operating system. Thank you!

    Read the article

  • MySQL, replacing &nbsp; with... nothing (delete those, please!)

    - by javipas
    I'm trying to purge my WordPress content from "false" carriage return (CR). These are caused after a migration of my content, that now presents from time to time a &nbsp; code that makes the web rendering engine to "paint" a CR where I would like to be nothing. The paragraphs seem to have a double CR because of this, and look too far apart. I'd like to be able to make a MySQL query in order to get rid of that strings, but at the moment I haven't found the key. What I've tried is UPDATE wp_posts set post_content = replace (post_content,'&nbsp;',' '); But i get <p> </p> where before were the &nbsp; strings. This seems not the answer at all. Could it have to be with the ampersand, and in that case, should I use something like &amp;nbsp; or something similar?

    Read the article

  • CUPS basic auth error through web interface

    - by Inaimathi
    I'm trying to configure CUPS to allow remote administration through the web interface. There's enough documentation out there that I can figure out what to change in my cupsd.conf (changing Listen localhost:631 to Port 631, and adding Allow @LOCAL to the /, /admin and /admin/conf sections). I'm now at the point where I can see the CUPS interface from another machine on the same network. The trouble is, when I try to Add Printer, I'm asked for a username and password, but my response is rejected even when I know I've gotten it right (I assume it's asking for the username and password of someone in the lpadmin group on the server machine; I've sshed in with credentials its rejecting, and the user I'm using has been added to the lpadmin group). If I disable auth outright, by changing DefaultAuthType Basic to DefaultAuthType None, I get an "Unauthorized" error instead of a password request when I try to Add Printer. What am I doing wrong? Is there a way of letting users from the local network to administer the print server through the CUPS web interface? EDIT: By request, my complete cupsd.conf (spoiler: minimally edited default config file that comes with the edition of CUPS from the Debian wheezy repos): LogLevel warn MaxLogSize 0 SystemGroup lpadmin Port 631 # Listen localhost:631 Listen /var/run/cups/cups.sock Browsing On BrowseOrder allow,deny BrowseAllow all BrowseLocalProtocols CUPS dnssd # DefaultAuthType Basic DefaultAuthType None WebInterface Yes <Location /> Order allow,deny Allow @LOCAL </Location> <Location /admin> Order allow,deny Allow @LOCAL </Location> <Location /admin/conf> AuthType Default Require user @SYSTEM Order allow,deny Allow @LOCAL </Location> # Set the default printer/job policies... <Policy default> # Job/subscription privacy... JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default # Job-related operations must be done by the owner or an administrator... <Limit Create-Job Print-Job Print-URI Validate-Job> Order deny,allow </Limit> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document> Require user @OWNER @SYSTEM Order deny,allow </Limit> # All administration operations require an administrator to authenticate... <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # All printer operations require a printer operator to authenticate... <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # Only the owner or an administrator can cancel or authenticate a job... <Limit Cancel-Job CUPS-Authenticate-Job> Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy> # Set the authenticated printer/job policies... <Policy authenticated> # Job/subscription privacy... JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default # Job-related operations must be done by the owner or an administrator... <Limit Create-Job Print-Job Print-URI Validate-Job> AuthType Default Order deny,allow </Limit> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> # All administration operations require an administrator to authenticate... <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # All printer operations require a printer operator to authenticate... <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # Only the owner or an administrator can cancel or authenticate a job... <Limit Cancel-Job CUPS-Authenticate-Job> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy>

    Read the article

  • How to disable Mac OS X from using swap when there still is "Inactive" memory?

    - by Motin
    A common phenomena in my day to day usage (and several other's according to various posts throughout the internet) of OS X, the system seems to become slow whenever there is no more "Free" memory available. Supposedly, this is due to swapping, since heavy disk activity is apparent and that vm_stat reports many pageouts. (Correct me from wrong) However, the amount of "Inactive" ram is typically around 12.5%-25% of all available memory (^1.) when swapping starts/occurs/ends. According to http://support.apple.com/kb/ht1342 : Inactive memory This information in memory is not actively being used, but was recently used. For example, if you've been using Mail and then quit it, the RAM that Mail was using is marked as Inactive memory. This Inactive memory is available for use by another application, just like Free memory. However, if you open Mail before its Inactive memory is used by a different application, Mail will open quicker because its Inactive memory is converted to Active memory, instead of loading Mail from the slower hard disk. And according to http://developer.apple.com/library/mac/#documentation/Performance/Conceptual/ManagingMemory/Articles/AboutMemory.html : The inactive list contains pages that are currently resident in physical memory but have not been accessed recently. These pages contain valid data but may be released from memory at any time. So, basically: When a program has quit, it's memory becomes marked as Inactive and should be claimable at any time. Still, OS X will prefer to start swapping out memory to the Swap file instead of just claiming this memory, whenever the "Free" memory gets to low. Why? What is the advantage of this behavior over, say, instantly releasing Inactive memory and not even touch the swap file? Some sources (^2.) indicate that OS X would page out the "Inactive" memory to swap before releasing it, but that doesn't make sense now does it if the memory may be released from memory at any time? Swapping is expensive, releasing is cheap, right? Can this behavior be changed using some preference or known hack? (Preferably one that doesn't include disabling swap/dynamic_pager altogether and restarting...) I do appreciate the purge command, as well as the concept of Repairing disk permissions to force some Free memory, but those are ways to painfully force more Free memory than to actually fixing the swap/release decision logic... Btw a similar question was asked here: http://forums.macnn.com/90/mac-os-x/434650/why-does-os-x-swap-when/ and here: http://hintsforums.macworld.com/showthread.php?t=87688 but even though the OPs re-asked the core question, none of the replies addresses an answer to it... ^1. UPDATE 17-mar-2012 Since I first posted this question, I have gone from 4gb to 8gb of installed ram, and the problem remains. The amount of "Inactive" ram was 0.5gb-1.0gb before and is now typically around 1.0-2.0GB when swapping starts/occurs/ends, ie it seems that around 12.5%-25% of the ram is preserved as Inactive by osx kernel logic. ^2. For instance http://apple.stackexchange.com/questions/4288/what-does-it-mean-if-i-have-lots-of-inactive-memory-at-the-end-of-a-work-day : Once all your memory is used (free memory is 0), the OS will write out inactive memory to the swapfile to make more room in active memory. UPDATE 17-mar-2012 Here is a round-up of the methods that have been suggested to help so far: The purge command "Used to approximate initial boot conditions with a cold disk buffer cache for performance analysis. It does not affect anonymous memory that has been allocated through malloc, vm_allocate, etc". This is useful to prevent osx to swap-out the disk cache (which is ridiculous that osx actually does so in the first place), but with the downside that the disk cache is released, meaning that if the disk cache was not about to be swapped out, one would simply end up with a cold disk buffer cache, probably affecting performance negatively. The FreeMemory app and/or Repairing disk permissions to force some Free memory Doesn't help releasing any memory, only moving some gigabytes of memory contents from ram to the hd. In the end, this causes lots of swap-ins when I attempt to use the applications that were open while freeing memory, as a lot of its vm is now on swap. Speeding up swap-allocation using dynamicpagerwrapper Seems a good thing to do in order to speed up swap-usage, but does not address the problem of osx swapping in the first place while there is still inactive memory. Disabling swap by disabling dynamicpager and restarting This will force osx not to use swap to the price of the system hanging when all memory is used. Not a viable alternative... Disabling swap using a hacked dynamicpager Similar to disabling dynamicpager above, some excerpts from the comments to the blog post indicate that this is not a viable solution: "The Inactive Memory is high as usual". "when your system is running out of memory, the whole os hangs...", "if you consume the whole amount of memory of the mac, the machine will likely hang" To sum up, I am still unaware of a way of disabling Mac OS X from using swap when there still is "Inactive" memory. If it isn't possible, maybe at least there is an explanation somewhere of why osx prefers to swap out memory that may be released from memory at any time?

    Read the article

  • How to add nvidia drivers after previous failure with linux mint?

    - by LessThanMe
    Before today, I had perfectly good drivers from nvidia for my linux mint (15) box. I decided to update it because my performance in TF2 is less than stellar, and then things went south. I used synaptic to install nvidia-331 and then rebooted, but when I selected Mint in GRUB I waited...and waited...and waited. Nothing happened, but the display stayed on (a completely black video was being output). So I went into recovery mode from GRUB, went to root access, and apt-get remove --purge nvidia*'d my way out of that mess, and installed nvidia-common. Now my performance in graphic intensive stuff (read: games, blender) sucks, so I've been through the same thing a few times trying to re-install nvidia-current. I just want to get it back how it was. Thanks for any help! Nvidia GTX 560

    Read the article

  • Purging old Exchange email/content on SBS2003

    - by Aitch
    We have a Windows SBS 2003 server that used to manage email, calendaring and such like for a small organisation via Exchange. We successfully migrated everything to Google Apps for Business about 18 months ago. The server only provides local network services now. We have backed up and virtualized this machine and would now like to purge any residual mail to save disk space and speed up backup etc. The disk space is such that I believe the Exchange mail is still on there somewhere. I've stumbled through System Manager and poked about but cannot confirm whether this is the case. Where would this live and how might I go about it? (Disclaimer: I'm not a Windows admin, Linux is my thing...)

    Read the article

  • Fix a tomcat6 error message "/bin/bash already running" when starting tomcat?

    - by Andrew Austin
    I have a Ubuntu 10.04 machine that has tomcat6 on it. When I start tomcat6 with /etc/init.d/tomcat6 start I get * Starting Tomcat servlet engine tomcat6 /bin/bash already running. and the server fails to start. Unfortunately, there is nothing in /var/log/tomcat/catalina.out to help debug the issue. With some cleverly placed echo statements it seems to be the line from /etc/init.d/tomcat6: start-stop-daemon --start -u "$TOMCAT6_USER" -g "$TOMCAT6_GROUP" \ -c "$TOMCAT6_USER" -d "$CATALINA_TMPDIR" \ -x /bin/bash -- -c "$AUTHBIND_COMMAND $TOMCAT_SH" The only thing I've changed in this script is TOMCAT6_USER=root. In servers.xml, the only thing I've changed is <Connector port="80" protocol="HTTP/1.1" from port 8080. I have tried reinstalling the package by first removing everything sudo apt-get --purge remove tomacat6 and then sudo apt-get install tomcat6 but this has not solved the issue. I have also restarted the server multiple times in hopes of some magic. Everything was working until I restarted my server. Any ideas?

    Read the article

  • Fix a tomcat6 error message "/bin/bash already running" when starting tomcat?

    - by Andrew Austin
    I have a Ubuntu 10.04 machine that has tomcat6 on it. When I start tomcat6 with /etc/init.d/tomcat6 start I get * Starting Tomcat servlet engine tomcat6 /bin/bash already running. and the server fails to start. Unfortunately, there is nothing in /var/log/tomcat/catalina.out to help debug the issue. With some cleverly placed echo statements it seems to be the line from /etc/init.d/tomcat6: start-stop-daemon --start -u "$TOMCAT6_USER" -g "$TOMCAT6_GROUP" \ -c "$TOMCAT6_USER" -d "$CATALINA_TMPDIR" \ -x /bin/bash -- -c "$AUTHBIND_COMMAND $TOMCAT_SH" The only thing I've changed in this script is TOMCAT6_USER=root. In servers.xml, the only thing I've changed is <Connector port="80" protocol="HTTP/1.1" from port 8080. I have tried reinstalling the package by first removing everything sudo apt-get --purge remove tomacat6 and then sudo apt-get install tomcat6 but this has not solved the issue. I have also restarted the server multiple times in hopes of some magic. Everything was working until I restarted my server. Any ideas?

    Read the article

  • How to set the PHP Api Version for phpize

    - by Tom Frost
    I'm upgrading php on my server but I'm running into a problem with phpize and compiling external modules. phpize -v reports: Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20090115 Zend Extension Api No: 220090115 But on my test server (which I'm trying to replicate) I get this: Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 I'm running debian squeeze, pulling the php 5.3.0-2 packages from the experimental repo. The difference betweent he two servers is that the first server has had old verisons of php on it, and the test server was installed with php 5.3.0-2 from the start. I've attempted uninstalling all PHP packages from the first server (using --purge to get rid of all the config files) and re-installing 5.3 fresh, but I'm still having the same issue. Help!

    Read the article

  • SQL 2008 Datawarehouse Collection Agent Fails with Mirrored Databases on instance

    - by Dale Wright
    I have a data collection job that fails when a Database on the instance is in Recovery Mode. The database in recovery is the MIRROR partner in the database mirror. The Job that fails is as follows. collection_set_1_noncached_collect_and_upload The job consists of the following steps dcexec -u -s 1 -i "INSTANCE03" EXEC [dbo].[sp syscollector purge collection logs] dcexec -u -s 1 -i "INSTANCE03" The job fails at Step 1. I have run the steps manually and they all appear to be ok. If I change the mirror database to be the principal the job completes successfully.

    Read the article

  • mysql client fails to start on command line

    - by Mark Basmayor
    Hi, I have been using the mysql command line client a lot before but I suddenly start getting this error when I try to launch it. mysql: relocation error: mysql: symbol strmov_overlapp, version libmysqlclient_16 not defined in file libmysqlclient.so.16 with link time reference The only significant event that comes into my mind is updating from Ubuntu 9.10 to 10.4. I'm not sure if there's anything else that I did to mess it up. I tried uninstalling both the mysql server and mysql client like so but to no avail. sudo aptitude purge mysql-server-5.1 Any help will be much appreciated, thanks.

    Read the article

  • Thunderbird segmentation fault problem

    - by Dariusz Górecki
    Hey all, my thunderbird crashes few seconds after it boots up regardless of in safe mode or normal, here is a strace log: http://pastebin.com/tccfYwcD I've searched google, ubuntu forums, and mozilla bug tracker about this problem, but any of found answers did not helped me :/ I've tried: nscd daemon install solutions posted earlier fresh clean instal of ubuntu 10.10 (32b) and thunderbird 3.1.7 from repos on a VM - problem still exists removed all thunderbrid related dot files and dot dirs, and setup profile from beginning Remove thunderbird and related stuff with apt purge, and install tb from official .deb package None of these steps helps me, tb still crashes with segmentation fault :/ I use gmail IMAP account, I've searched and found few other tips on google, but with no success. I've even tried to remove mails from web gui, that came after first notice of problem, still no luck. I'm not using any network fs, and not sharing this account with anyone, and I do not use filesystem or home encryption either just clean install :/ If You guys need some more info for this let me know. TB: 3.1.7 from repos and official package Ubuntu 32bit 10.10 with medibuntu repos, fully updated

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >