Search Results

Search found 251 results on 11 pages for 'vsphere'.

Page 9/11 | < Previous Page | 5 6 7 8 9 10 11  | Next Page >

  • Move the ESXi service console from eth0 to eth1.123

    - by Mircea Vutcovici
    I have an VMware ESXi 4.0.0 with 2 physical network cards. First one, eth0, has only the Service Console and the other one, eth1, is a trunk with all VLANs (including the management VLAN used by the Service Console). I would like to free eth0 port to be able to connect a network storage and I would like to move the management IP from eth0 to eth1/VLAN123. Can I do this remotely? Is it possible from vSphere client? Should I do it from the ESXi console?

    Read the article

  • VM clients can not access WAN

    - by Saariko
    I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

    Read the article

  • Is there a way to obtain a Dell server's RAID configuration/level using only winrm/wsman? (ESXi servers)

    - by EGr
    I've seen videos describing how to configure RAID using wsman/winrm commands run against a server's iDRAC, but I can't seem to find anything that will just give me the current configuration and RAID levels. Is this possible? What uri would I use? If it matters, this is being run against M610s. Edit: If there is an easier way to obtain this information by running a script against the iDRAC, I'm not opposed to switching my methods. EDIT: The server is running ESXi, so if there is a way to obtain this through the vSphere client or PowerCLI, I can do that too. Overall, I just need a way to obtain the RAID configuration for multiple servers without having to query against the actual server (eg: via the iDRAC).

    Read the article

  • Iozone: sensible settings for a server with lots of RAM

    - by Frank Brenner
    I have just acquired a server with: 2x quadcore Xeons 48G ECC RAM 5x 160GB SSDs on an LSI 9260-8i Before deploying the target platform, I'd like to collect as much benchmark data as possible, testing I/O with hardware RAID in various configurations, ZFS zRAID, as well as I/O performance on vSphere and with KVM virtualization. In order to see real disk I/O performance without cache effects, I tried running Iozone with a maximum file of more than twice the physical RAM as recommended in the documentation, so: iozone -a -g100G However, as one might expect, this takes far too long to be practicable. (I stopped the run after seven hours..) I'd like to reduce the range of record and file sizes to values that might reflect realistic performance for an application server, hopefully getting the run times to under an hour or so. Any ideas? Thanks.

    Read the article

  • Unable to SSH into ESXi 4.1 host - "Access Denied"

    - by Andrew White
    I am unable to SSH into an existing ESXi server. I have a user which is in the "root" and "users" group and is able to connect via vSphere. However after enabling "Remote support (SSH)", attempting to connect by putty and entering my username/password when prompted I am presented with an "Access Denied" message. I have run through the options presented at this KB article to no avail. I have taken down the firewall on the machine (it is remote) temporarily to check if this helped - no change. The username/password are definitely correct and I can obviously get connectivity if I am presented with the username/password prompt. I am at a bit of a loss what else I can try. Thanks all

    Read the article

  • Hyper-V: determine the guest's name given the GUID

    - by syneticon-dj
    How would I go about determining the guest's name given its GUID or vice-versa, preferably with only the Hyper-V/Server Core stock install at hands? Rationale: I am in favor of having a repository of dirty tricks to revert to when in great need. To immediately quiesce all (storage) operations of a VM guest without losing the state, I used to run kill 17 <all VM's virtual processes> (signaling SIGSTOP) and resumed afterwards using kill 19 <all VM's virtual processes> (signaling SIGCONT) in ESXi/vSphere shell. I tried the same technique with Hyper-V using Process Explorer's "Suspend" functionality on the vmwp.exe processes and it seemed to work. I have yet to find a way for easily identifying the processes to suspend, though - the vmwp command line is only listing a GUID.

    Read the article

  • How can I move an existing VM's files to a new directory in the same datastore?

    - by blade
    Hi, I have some VMs deployed on ESX. In vSphere 4, I want to move these VMs into another directory in the datastore. So the VM directories are under root, but I want them in root/MyNewFolder. I tried this by turning off a VM, copying the VM's file (VMDK etc) into the directory I want, deleting the hard drive from the VM's settings, adding a new hard drive and then selecting the new path to the VMDK. When I press ok on the settings dialog box, having made this modification to the settings, I get the following error: not found. What I am trying to do also does not seem to be possible when making a new VM. I can only make VMs under root.

    Read the article

  • Where are iSCSI and volume information location on ESX 4.0?

    - by sec_goat
    Let me start by saying I am somewhat of a Vmware novice, I know just enought to manage and create servers at a basic level from the vSphere client. I have a VMWare server, ESX 4.0 connected over iSCSI to a SAN. The SAN is being used as storage for both RDMs and VMFS volumes. The SAN has died and I ordered a new one. Where can I see the settings related to the iSCSI and volume configuration so that I can try and replicate them on the new SAN when it arrives?

    Read the article

  • What VMWare should I choose?

    - by wbad
    I'm new to VMWare stuff. What I need to do is pretty basic: Just to install two different Windows 2008 versions on a server with 2x 4core CPU and 2x 3TB hard disks. I asked my datacenter to install the free version (VMware ESXi 4.1) but apparently it did not recognize 3TB disks. Now I'm wondering whether VMWare 5 can handle 3TB disks, and if so, what variant? There is a huge array of options there and some prices are astonishingly high: http://www.vmware.com/products/datacenter-virtualization/vsphere/pricing.html So I'm really confused and I appreciate your hints.

    Read the article

  • SAN for Medium Business - Where to start? [closed]

    - by Henson
    I've always run Linux on my home computers, and done PC repair for years, but this is my first experience with needing to buy a SAN. I thought I was knowledgeable, but I feel a bit lost. I need to be able to support 25 VMs, which are currently managed through vSphere. The company I'm at is growing quickly though, so I'd like to plan for the future. Ideally, I want a solution that I can just tack arrays onto and manage as one large, iSCSI drive. Suggestions? Good resources? If I can find something that appears to software as one large drive, am I better off going with a solution like FreeNAS or Starwind, or an all-in-one proprietary solution like NetApp? Cost, is (of course, and always I'm sure) an issue.

    Read the article

  • Automatic VM deployment

    - by Robert Wilson
    I have an idea to streamline deployments of prototypes within our team using VMs. The idea would be that a developer would be able to deploy their artifacts to Maven, then use a Web interface to pull them onto a development VM for integration/regression testing. They would then be able to to push those artifacts to a reference system, and finally onto production. I'm currently thinking of doing this myself using the vSphere Java API ( http://vijava.sourceforge.net/ ), and some simple scripting to grab artifacts from the Maven repository, configuration from SVN, and then start up a JBoss server. It feels like the kind of thing that may already be available though, has anyone heard of something similar?

    Read the article

  • Oracle VM networking under the hood and 3 new templates

    - by Chris Kawalek
    We have a few cool things to tell you about:  First up: have you ever wondered what happens behind the scenes in the network when you Live Migrate your Oracle VM server workload? Or how Oracle VM implements the network infrastructure you configure through your point & click action in the GUI? Really….how do they do this? For an in-depth view of the Oracle VM for x86 Networking model, Look ‘Under the Hood’ at Networking in Oracle VM Server for x86 with our best practices engineer in a blog post on OTN Garage. Next, making things simple in Oracle VM is what we strive every day to deliver to our user community. With that, we are pleased to bring you updates on three new Oracle Application templates: E-Business Suite 12.1.3 for Oracle ExalogicOracle VM templates for Oracle E-Business Suite 12.1.3 (x86 64-bit for Oracle Exalogic Elastic Cloud) contain all the required elements to create an Oracle E-Business Suite R12 demonstration system on an Exalogic server. You can use these templates to quickly build an EBS 12.1.3 demonstration environment, bypassing the operating system and the software install (via the EBS Rapid Install). For further details, please review the announcement.   JD Edwards EnterpriseOne 9.1 and JD Edwards EnterpriseOne Tools 9.1.2.1 for x86 servers and Oracle Exalogic The Oracle VM Templates for JD Edwards EnterpriseOne provide a method to rapidly install JD Edwards EnterpriseOne 9.1  and Tools 9.1.2.1. The complete stack includes Oracle Database 11g R2 and Oracle WebLogic Server 10.3.5 running on Oracle Linux 5. The templates can be installed to Oracle VM Server for x86 release 3.x and to the Oracle Exalogic Elastic Cloud.  PeopleSoft PeopleTools 8.5.2.10 for Oracle Exalogic This virtual deployment package delivers a "quick start" of PeopleSoft Middle-tier template on Oracle Linux for Oracle Exalogic Elastic Cloud. And last, are you wondering why we talk about “fast”, “rapid” when we refer to using Oracle VM templates to virtualize Oracle applications? Read the Evaluator Group Lab Validation report quantifying speeds of deployment up to 10x faster than with VMware vSphere. Or you can also check out our on demand webcast Quantifying the Value of Application-Driven Virtualization.

    Read the article

  • Impressions from VMworld - Clearing up Misconceptions

    - by Monica Kumar
    Gorgeous sunny weather…none of the usual summer fog…the Oracle Virtualization team has been busy at VMworld in San Francisco this week. From the time exhibits opened on Sunday, our booth staff was fully engaged with visitors. It was great to meet with customers and prospects, and there were many…most with promises to meet again in October at Oracle OpenWorld 2012. Interests and questions ran the gamut - from implementation details to consolidating applications to how does Oracle VM enable rapid application deployment to Oracle support and licensing. All good stuff! Some inquiries are poignant and really help us get at the customer pain points. Some are just based on misconceptions. We’d like to address a couple of common misconceptions that we heard: 1) Rapid deployment of enterprise applications is great but I don’t do this all the time. So why bother? While production applications don’t get updated or upgraded as often, development and QA staging environments are much more dynamic. Also, in today’s Cloud based computing environments, end users expect an entire solution, along with the virtual machine, to be provisioned instantly, on-demand, as and when they need to scale. Whether it’s adding a new feature to meet customer demands or updating applications to meet business/service compliance, these environments undergo change frequently. The ability to rapidly stand up an entire application stack with all the components such as database tier, mid-tier, OS, and applications tightly integrated, can offer significant value. Hand patching, installation of the OS, application and configurations to ensure the entire stack works well together can take days and weeks. Oracle VM Templates provide a much faster path to standing up a development, QA or production stack in a matter of hours or minutes. I see lots of eyes light up as we get to this point of the conversation. 2) Oracle Software licensing on VMware vSphere In the world of multi-vendor IT stacks, understanding license boundaries and terms and conditions for each product in the stack can be challenging.  Oracle’s licensing, though, is straightforward.  Oracle software is licensed per physical processor in the server or cluster where the Oracle software is installed and/or running.  The use of third party virtualization technologies such as VMware is not allowed as a means to change the way Oracle software is licensed.  Exceptions are spelled out in the licensing document labeled “Hard Partitioning". Here are some fun pictures! Visitors to our booth told us they loved the Oracle SUV courtesy shuttles that are helping attendees get to/from hotels. Also spotted were several taxicabs sporting an Oracle banner! Stay tuned for more highlights across desktop and server virtualization as we wrap up our participation at VMworld.

    Read the article

  • Partners - Steer Clear of the Unknown with Oracle Enterprise Manager12c and Plug-in Extensibility

    - by Get_Specialized!
    Imagine if you just purchased a new car and as you entered the vehicle to drive it home and you found there was no steering wheel. And upon asking the dealer you were told that it was an option and you had a choice now or later of a variety of aftermarket steering wheels that fit a wide variety of automobiles. If you expected the car to already have a steering wheel designed to manage your transportation solution, you might wonder why someone would offer an application solution where its management is not offered as an option or come as part of the solution... Using management designed to support the underlying technology and that can provide management and support  for your own Oracle technology based solution can benefit your business  a variety of ways: increased customer satisfaction, reduction of support calls, margin and revenue growth. Sometimes when something is not included or recommended , customers take their own path which may not be optimal when using your solution and has later impact on the customers satisfaction or worse a negative impact on their business. As an Oracle Partner, you can reduce your research, certification, and time to market by selecting and offering management designed, developed, and supported for Oracle product technology by Oracle with Oracle Enterprise Manager 12c. For partners with solution specific management needs or seeking to differentiate themselves in the market, Enterprise Manager 12c is extensible and provides partners the opportunity to create their own plug-ins as well as a validation program for them.  Today a number of examples by partners are available and Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} more on the way from such partners as NetApp for NetApp storage and Blue Medora for VMware vSphere. To review and consider further for applicability to your solution, visit  the Oracle PartnerNetwork KnowledgeZone for Enterprise Manager under the Develop Tab http://www.oracle.com/partners/goto/enterprisemanager

    Read the article

  • vCenter appliance won't use mail relay server

    - by Safado
    tl;dr: - sendmail is configured to use a relay server but still insists on using 127.0.01 as the relay, which results in mail not being sent. We have the open source vCenter appliance (v 5.0) managing our ESXi cluster. When connected to it via vSphere Client, you can configure the SMTP relay server to use by going to Administration > vCenter Server Settings > MAIL. There you can set the SMTP Server value. I looked through their documentation and also confirmed on the phone with support that all you have to do to configure mail is to put in the relay IP or fqdn in that box and hit OK. Well, I had done that and mail still wasn't sending. So I SSH into the server (which is SuSE) and look at /var/log/mail and it looks like it's trying to relay the email through 127.0.0.1 and it's rejecting it. So looking through the config files, I see there's /etc/sendmail.cf and /etc/mail/submit.cf. You can configure items in /etc/sysconfig/sendmail and run SuSEconfig --module sendmail to generate those to .cf files based on what's in /etc/sysconfig/sendmail. So playing around, I see that when you set the SMTP Server value in the vCenter gui, all that it does is change the "DS" line in /etc/mail/submit.cf to have DS[myrelayserver.com]. Looking on the internet, it would appear that the DS line is really the only thing you need to change in order to use a relay server. I got on the phone with VMWare support and spent 2 hours trying to modify ANY setting that had anything to do with relays and we couldn't get it to NOT use 127.0.0.1 as the relay. Just to note, any time we made any sort of configuration change, we restarted the sendmail service. Does anyone know whats going on? Have any ideas on how I can fix this?

    Read the article

  • ESXi 4.1 host not recognising existing VMFS datastore

    - by Graeme Donaldson
    Existing setup: host1 and host2, ESX 4.0, 2 HBAs each. lun1 and lun2, 2 LUNs belonging to the same RAID set (my terminology might be sketchy here). This has been working just fine all along. I added host3, ESXi 4.1, 2 HBAs. If I view Configuration / Storage Adapters, I can see that both HBAs see both LUNs, but if I view Configuration / Storage, I only see 1 datastore. host1/2 can see both LUNs and I have VMs running on both too. I have rescanned, refreshed and even rebooted, but host3 refuses to acknowledge 1 of the datastores. Does anyone know what's going on? Update: I re-installed the host with ESX (not i) 4.0, same version as the existing hosts and it's still not recognising the vmfs. I think I'm going to SVmotion everything off that datastore then format it. Update2: I've created the LUN from scratch and the problem gets even weirder. I've presented the LUN to all 3 hosts, and I can see the LUN in the vSphere client's Configuration / Storage Adapters section on all 3 hosts. If I create a datastore on the LUN via the Configuration / Storage section on host1, it works fine and I can create an empty folder via datastore browser, but the datastore is not seen by the host2 and host3. I can use the Add Storage wizard on host2 and it will see the LUN. At this point the "VMFS Label" column has the label I gave with "(head)" appended. If I try the Add Storage wizard's "Keep the existing signature" option, it fails with an error "Cannot change the host configuration." and a dialog box that says 'Call "HostStorageSystem.ResolveMultipleUnresolvedVmfsVolumes" for object "storageSystem-17" on vCenter Server "vcenter.company.local" failed.' If I try the Add Storage wizard's "Assign a new signature" option on host2, it will complete and the VMFS label will have "snap-(hexnumber)-" prepended. At this point its also visible on host3, but not host1. I have a similar setup in a different datacenter which didn't give me all this trouble.

    Read the article

  • How do I add a VMware ESXi Host to Microsoft Virtual Machine Manager?

    - by user63250
    I am trying to manage virtual machines running on a VMware ESXi host using Microsoft System Center Virtual Machine Manager. I was able to add the ESXi machine using the "Add VMware VirtualCenter server" option, but can't access any of the VMs on the datastore associated with this ESXi server. The datastore of the ESXi box is showing up with the correct name, but it won't let me see any of the VMs that have already been created; I get "There are no virtual machines on this host." Because I couldn't get any of the existing virtual machines to show up, I tried creating some new ones. When using VMM to connect to ESXi and create new VMs, I get the following error messages in the "rating explanation" section: The virtualization software on the selected host does not support virtual hard disks on an IDE bus. and The virtualization software on the host XXXXXX does not support the creation of dynamic virtual hard disk. Any ideas on why I can't manage existing machines and why I can't create new ones? The existing machines were created in vSphere. I should note that the ESXi server and the server running SCVMM are both on the same domain. I should also note that although the ESXi box has been added as a VirtualCetner server, when I try to add it through the "Add Host" option, I get an error message saying "Virtual Machine Manager cannot complete the VirtualCenter action on server EXSi because of the following error: The operation is not supported on the object."

    Read the article

  • ESXi Server with 12 physical cores maxed out with only 8 cores assigned in virtual machines

    - by Sam
    I have an ESXi 5 server running on a 2-processor, 12-core system with hyperthreading enabled. So: 12 physical cores, 24 logical ones. On this server are 4 Windows 7 VMs, each configured for 2 processors, each running VMware Tools. Looking at my stats in vSphere, my "core utilization" is constantly maxed out. Yes, these machines are working hard, but only 8 cores have been allocated. How is this possible? Should I look into reducing the processor count per machine as in this post: VMware ESX server? I checked to ensure that hardware virtualization is enabled in the BIOS of the machine (a DELL R410). I've also started reading up on configuration, but being a newbie there's a lot of material to catch up on. It also seems I should only bother with advanced settings and pools if I'm really pushing the load, and I don't think that I should be pushing it with so few VMs. I suspect that I have some basic, incorrect configuration setting, but it's also possible that I have some giant misconceptions about virtualization. Any pointers? EDIT: Given the responses I've gotten so far, it seems that this is a measurement problem and not a configuration problem, making this less critical. Perhaps the real question is: How does the core utilization of the server reach a higher percentage than all individual cores' core utilization, and given that this possibility makes the metric useless for overall server load, what is the best global metric for measuring CPU load on hyper-threaded systems?

    Read the article

  • Performance of Virtual machines on very low end machines

    - by TheLQ
    I am managing a few cheap servers as my user base isn't large enough to get much more powerful servers. I also don't have the money lying around to invest in a server to prepare for the larger user base. So I'm stuck with the old hardware I have. I am toying with the idea of virtualizing all the current OS's with most likely VMware vSphere Hypervisor (AKA ESXi) Xen (ESXi has too strict of an HCL, and my hardware is too old). Big reasons for doing so: Ability to upgrade and scale hardware rapidly - This is most likely what I'll be doing as I distribute services, get a bigger server, centralize (electricity bills are horrible), distribute, get a bigger server, etc... Manually doing this by reinstalling the entire OS would be a big pain Safety from me - I've made many rookie mistakes, like doing lots of risky work on a vital production server. With a VM I can just backup the state, work on my machine, test, and revert if necessary. No worries, and no OS reinstallation Safety from other factors - As I scale servers might go down, and a backup VM can instantly be started. Various other reasons. However the limiting factor here is hardware. And I mean very depressing hardware. The current server's run off of a Pentium 3 and 4, and have 512 MB and 768 MB RAM respectively (RAM can be upgraded soon however). Is the Virtualization layer small enough to run itself and a Linux OS effectively? Will performance be acceptable (50% CPU overhead for every operation isn't acceptable)? Does it leave enough RAM for the Linux OS? Is this even feasible?

    Read the article

  • vmware vmdk disk problem

    - by dmtr
    I have a VMware ESXi 4 server and 2 storage servers (mounted via nfs). Between the storage servers (Fedora 14) is a drbd cluster (dual primary) and ocfs2 filesystem; also every server has a local partition with an ext4 filesystem, both are mounted via nfs on the esxi server. When I tried to copy a virtual machine (naturally it was powered off) from the ext4 partition to the ocfs2 partition, the vmdk total file size is different, but the md5sum is the same. On the ext4 partition: # ls -la total 28492228 -rw------- 1 root root 42949672960 Jan 14 14:46 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 On the ocfs2 partition: # ls -la total 13974660 -rw------- 1 root root 42949672960 Jan 14 16:16 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 When I power on the virtual machine from the ocfs2 partition it dosn't work. I have a windows on the virtual machine and it freez?s after the windows logo. From the ext4 partition the virtual machine workes. I tested with linux (created and installed on ext4 partition and then copied to the ocfs2) and the same problem appears. When I create a virtual machine directly from ocfs2 partition, there are no problems. I tried to copy via vSphere client, and I have the same problem. Any suggestions?

    Read the article

  • Virtual (ESXi4) Win 2k8 R2 server hangs when adding role(s)

    - by Holocryptic
    I'm trying to provision a 2k8r2 Enterprise server in ESXi4. The OS installation goes fine, VMware tools, adding to domain, updates. All the basic stuff before you start adding Roles and Features. I've had this happen on two attempts already, and I'm not sure where the problem might be. I don't think it's hardware, because I have another 2k8r2 Standard server that's running fine. The only real difference is the install media. The server that's working was installed using a trial ISO and license. The one I'm having problems with is a full MAK installation. When I go to add a Role (the last case was Application Server) it gets all the way to "collecting installation results" before it hangs. CPU utilization in the vSphere client shows little spikes of activity with flatlines inbetween, but the whole console is locked up. The only way to release it is to power off and bring it back up. When you go to look at the added roles after bringing it back up, it shows that it is installed, but I don't trust that something didn't get wedged in all of that. The first install I did was with Thin Disk provisioning. The second attempt was with regular disk provisioning. In both cases 4GB of RAM, 2 vCPUs. VMware host is a HP Proliant DL380 G6, RAID-1 OS, RAID-5 data volume. 12 GB RAM. Has anyone else had this problem, or know where I should start poking around?

    Read the article

  • Firewall for internal networks

    - by Cylindric
    I have a virtualised infrastructure here, with separated networks (some physically, some just by VLAN) for iSCSI traffic, VMware management traffic, production traffic, etc. The recommendations are of course to not allow access from the LAN to the iSCSI network for example, for obvious security and performance reasons, and same between DMZ/LAN, etc. The problem I have is that in reality, some services do need access across the networks from time to time: System monitoring server needs to see the ESX hosts and the SAN for SNMP VSphere guest console access needs direct access to the ESX host the VM is running on VMware Converter wants access to the ESX host the VM will be created on The SAN email notification system wants access to our mail server Rather than wildly opening up the entire network, I'd like to place a firewall spanning these networks, so I can allow just the access required For example: SAN SMTP Server for email Management SAN for monitoring via SNMP Management ESX for monitoring via SNMP Target Server ESX for VMConverter Can someone recommend a free firewall that will allow this kind of thing without too much low-level tinkering of config files? I've used products such as IPcop before, and it seems to be possible to achieve this using that product if I re-purpose their ideas of "WAN", "WLAN" (the red/green/orange/blue interfaces), but was wondering if there were any other accepted products for this sort of thing. Thanks.

    Read the article

  • Virtual Fileserver

    - by Sergei
    Hi, We are planning to move our production servers to the datacenter and virtualize remaining servers in the process.Datacenter will have HP blades with vSphere on top.Currentliy we are using Celerra NS20 as fileserver.Since datacenter is using HP kit and EVA 4400 as SAN, we cannot have Celerra there, as EMC supoprt for Celerra does not work for non EMC array. I have searched for possible options and one of them was to have HP NAS blade X3800sb instead of Celerra.However this seems like overkill for me.We are only using Celerra for about 100 users and 50 servers and I think having X3800sb could be waste of resources. The other option would be to have a virtual fileserver as a part of vmware environment in datacenter.We only need CIFS to be provided.The only option I can think of is Windows Storage server.We had a bad expirience with Windows servers used as fileservers ( memory leaks one thing) in the past and this was one of the reasons we moved to Celerra. What are the other options?We need something as reliable as Celerra with as many options as possible.For example , Celerra has per folder quotas, deduplication, dynamic volume allocation, automatic failover, VTLU, replication. Also we would need to replicate NAS data to the failover site.We could use block level replication , SAN-to-SAN, but this would mean wasted bandwidth, as we need only subset of folders to be replicated.We used CA XSoft for windows servers in the past and Celerra has option for Celerra replication. Thank you very much in advance, Please ask me if I missed any details!

    Read the article

  • vmware vmdk disk problem

    - by dmtr
    Hello, I have a vmware esxi 4 server and 2 storage servers (mount as nfs). Between the storage servers (fedora 14) is made drbd cluster (dual primary) and ocfs2 filesystem, also every server has local partition with ext4 filesystem, both are mounted as nfs on esxi server. When i tried to copy a virtual machine (naturally it power off) files from ext4 partition to ocfs2 partition, vmdk total file size is different, but md5sum is the same. on ext4 partition: # ls -la total 28492228 -rw------- 1 root root 42949672960 Jan 14 14:46 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 on ocfs2 partition: # ls -la total 13974660 -rw------- 1 root root 42949672960 Jan 14 16:16 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 When i power on the virtual machine from ocfs2 partition it dosn't work. I have a windows on the virtual machine and it freez?s after windows logo. From ext4 partition the virtual machine is worked. Test with linux (create and install on ext4 partition and copy) the same problem appears. When i create a virtual machine directly from ocfs2 partition, there are no problems. I tried to copy via vSphere client, and i have the same problem. Any suggestions ?

    Read the article

  • ESXi 4.1 host not recognising existing VMFS datastore

    - by ThatGraemeGuy
    Existing setup: host1 and host2, ESX 4.0, 2 HBAs each. lun1 and lun2, 2 LUNs belonging to the same RAID set (my terminology might be sketchy here). This has been working just fine all along. I added host3, ESXi 4.1, 2 HBAs. If I view Configuration / Storage Adapters, I can see that both HBAs see both LUNs, but if I view Configuration / Storage, I only see 1 datastore. host1/2 can see both LUNs and I have VMs running on both too. I have rescanned, refreshed and even rebooted, but host3 refuses to acknowledge 1 of the datastores. Does anyone know what's going on? Update: I re-installed the host with ESX (not i) 4.0, same version as the existing hosts and it's still not recognising the vmfs. I think I'm going to SVmotion everything off that datastore then format it. Update2: I've created the LUN from scratch and the problem gets even weirder. I've presented the LUN to all 3 hosts, and I can see the LUN in the vSphere client's Configuration / Storage Adapters section on all 3 hosts. If I create a datastore on the LUN via the Configuration / Storage section on host1, it works fine and I can create an empty folder via datastore browser, but the datastore is not seen by the host2 and host3. I can use the Add Storage wizard on host2 and it will see the LUN. At this point the "VMFS Label" column has the label I gave with "(head)" appended. If I try the Add Storage wizard's "Keep the existing signature" option, it fails with an error "Cannot change the host configuration." and a dialog box that says 'Call "HostStorageSystem.ResolveMultipleUnresolvedVmfsVolumes" for object "storageSystem-17" on vCenter Server "vcenter.company.local" failed.' If I try the Add Storage wizard's "Assign a new signature" option on host2, it will complete and the VMFS label will have "snap-(hexnumber)-" prepended. At this point its also visible on host3, but not host1. I have a similar setup in a different datacenter which didn't give me all this trouble.

    Read the article

< Previous Page | 5 6 7 8 9 10 11  | Next Page >