Search Results

Search found 8715 results on 349 pages for 'bad sectors'.

Page 90/349 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

  • PAM Winbind Expired Password

    - by kernelpanic
    We've got Winbind/Kerberos setup on RHEL for AD authentication. Working fine however I noticed that when a password has expired, we get a warning but shell access is still granted. What's the proper way of handling this? Can we tell PAM to close the session once it sees the password has expired? Example: login as: ad-user [email protected]'s password: Warning: password has expired. [ad-user@server ~]$ Contents of /etc/pam.d/system-auth: auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth sufficient pam_krb5.so use_first_pass auth sufficient pam_winbind.so use_first_pass auth required pam_deny.so account [default=2 success=ignore] pam_succeed_if.so quiet uid >= 10000000 account sufficient pam_succeed_if.so user ingroup AD_Admins debug account requisite pam_succeed_if.so user ingroup AD_Developers debug account required pam_access.so account required pam_unix.so broken_shadow account sufficient pam_localuser.so account sufficient pam_succeed_if.so uid < 500 quiet account [default=bad success=ok user_unknown=ignore] pam_krb5.so account [default=bad success=ok user_unknown=ignore] pam_winbind.so account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok password sufficient pam_krb5.so use_authtok password sufficient pam_winbind.so use_authtok password required pam_deny.so session [default=2 success=ignore] pam_succeed_if.so quiet uid >= 10000000 session sufficient pam_succeed_if.so user ingroup AD_Admins debug session requisite pam_succeed_if.so user ingroup AD_Developers debug session optional pam_mkhomedir.so umask=0077 skel=/etc/skel session optional pam_keyinit.so revoke session required pam_limits.so session optional pam_mkhomedir.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so session optional pam_krb5.so

    Read the article

  • Windows 7 - Wireless Signal Good - Internet Often Says Limited or No Activity

    - by Anthony Trilussa Pizzo
    Hi - I have a New Dell Studio XPS latop that I hooked up in early January of 2010. The Dell Studio XPS laptop is connected to my wireless router (Belkin Wireless N). The router was purchased in Februaru of 2010 because I thought my router was bad (A D-Link router). Comcast is my ISP. Everyday, at random times, the internet will have a good signal (according to the little Win 7 icon on the taskbar) but I will receive a message saying limited or no internet access and I cannot access the internet. I have the internet setup to automatically get an IP and I did the IPCONFIG release / renew but with no success. I even had a WiFi enabled Blackberry right next to my computer and whenever the computer loses an WiFi connection, so does the Blackberry. The router isnt't bad, because the old router did the same thing - giving me limited or no internet access while working sometimes. I also tried using two other laptops in same physical position as my Dell Studio XPS laptop and they have the same problem. I am going crazy trying to figure this out as I have called the Router Company (Belkin), my ISP (Comcast), and my computer maker (Dell). Can anyone offer some suggestions and I can try them as we work through this and maybe one of the suggestion will be right one. Thanks in advance for even reading my problem. I searched for a problem similar to mine on the internet, but I have not been able to keep a steady internet connection. (Side note - I used to have an IBM thinkpad laptop and D - Link router and for years that wireless connection worked FLAWLESSLY, with the same physical set up - the laptop in my bedroom, and the router in the basement.)

    Read the article

  • Cygwin, ssh, and git on Windows Server 2008

    - by Paul
    Hi everyone. I'm trying to setup a git repository on an existing Windows 2008 (R2) server. I have successfully installed Cygwin & added git and ssh to the packages, and everything works perfectly (thanks to Mark for his article on it). I can ssh to localhost on the server, and I can do git operations locally on the server. When I try to do either from the client, however, I get the "port 22, Bad file number" error. Detailed SSH output is limited to this: OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Connecting to {myserver} [{myserver}] port 22. debug1: connect to address {myserver} port 22: Attempt to connect timed out without establishing a connection ssh: connect to host {myserver} port 22: Bad file number Google tells me that this means I'm being blocked, usually, by a firewall. So, double-checked the firewall settings on the server, rule is there allowing port 22 traffic. I even tried turning off the firewall briefly, no change in behavior. I can ssh just fine from that client to other servers. The hosting company swears that there's no other firewalls blocking that server on port 22 (or any other port, they claim, but I find that hard to believe). I have another trouble ticket into them, just in case the first support person was full of it, but meanwhile I wanted to see if anyone could think of anything else it can be. Thanks, Paul

    Read the article

  • How do I easily repair a single unreadable block on a Linux disk?

    - by Nelson
    My Linux system has started throwing SMART errors in the syslog. I tracked it down and believe the problem is a single block on the disk. How do I go about easily getting the disk to reallocate that one block? I'd like to know what file got destroyed in the process. (I'm aware that if one block fails on a disk others are likely to follow; I have a good ongoing backup and just want to try to keep this disk working.) Searching the web leads to the Bad block HOWTO, which describes a manual process on an unmounted disk. It seems complicated and error-prone. Is there a tool to automate this process in Linux? My only other option is the manufacturer's diagnostic tool, but I presume that'll clobber the bad block without any reporting on what got destroyed. Worst case, it might be filesystem metadata. The disk in question is the primary system partition. Using ext3fs and LVM. Here's the error log from syslog and the relevant bit from smartctl. smartd[5226]: Device: /dev/hda, 1 Currently unreadable (pending) sectors Error 1 occurred at disk power-on lifetime: 17449 hours (727 days + 1 hours) ... Error: UNC at LBA = 0x00d39eee = 13868782 There's a full smartctl dump on pastebin.

    Read the article

  • SSH over HTTPS with proxytunnel and nginx

    - by Thermionix
    I'm trying to setup an ssh over https connection using nginx. I haven't found any working examples, so any help would be appreciated! ~$ cat .ssh/config Host example.net Hostname example.net ProtocolKeepAlives 30 DynamicForward 8118 ProxyCommand /usr/bin/proxytunnel -p ssh.example.net:443 -d localhost:22 -E -v -H "User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Win32)" ~$ ssh [email protected] Local proxy ssh.example.net resolves to 115.xxx.xxx.xxx Connected to ssh.example.net:443 (local proxy) Tunneling to localhost:22 (destination) Communication with local proxy: -> CONNECT localhost:22 HTTP/1.0 -> Proxy-Connection: Keep-Alive -> User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Win32) <- <html> <- <head><title>400 Bad Request</title></head> <- <body bgcolor="white"> <- <center><h1>400 Bad Request</h1></center> <- <hr><center>nginx/1.0.5</center> <- </body> <- </html> analyze_HTTP: readline failed: Connection closed by remote host ssh_exchange_identification: Connection closed by remote host Nginx config on the server; ~$ cat /etc/nginx/sites-enabled/ssh upstream tunnel { server localhost:22; } server { listen 443; server_name ssh.example.net; location / { proxy_pass http://tunnel; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } ssl on; ssl_certificate /etc/ssl/certs/server.cer; ssl_certificate_key /etc/ssl/private/server.key; } ~$ tail /var/log/nginx/access.log 203.xxx.xxx.xxx - - [08/Feb/2012:15:17:39 +1100] "CONNECT localhost:22 HTTP/1.0" 400 173 "-" "-"

    Read the article

  • Environment variables in bash_profile or bashrc?

    - by Viriato
    I have found this question [blog]: Difference between .bashrc and .bash_profile very useful but after seeing the most voted answer (very good by the way) I have further questions. Towards the end of the most voted, correct answer I see the statement as follows : Note that you may see here and there recommendations to either put environment variable definitions in ~/.bashrc or always launch login shells in terminals. Both are bad ideas. Why is it a bad idea (I am not trying to fight, I just want to understand)? If I want to set an environment variable and add it to the PATH (for example JAVA_HOME) where it would be the best place to put the export entry? in ~/.bash_profile or ~/.bashrc? If the answer to question number 2 is ~/.bash_profile, then I have two further questions: 3.1. What would you put under ~/.bashrc? only aliases? 3.2. In a non-login shell, I believe the ~/.bash_profile is not being "picked up". If the export of JAVA_HOME entry was in bash_profile would I be able to execute javac & java commands? Would it find them on the PATH? Is that the reason why some posts and forums suggest setting JAVA_HOME and alike to ~/.bashrc? Thanks in advance.

    Read the article

  • Why can I not access the internet when Windows 7 finds no issue with the ethernet connection and the network can see my device?

    - by WannabeCoder
    So I just moved from a house to an apartment. In the house and the apartment I had Uverse set up - and in both I had my desktop connected via a ~40 foot long cat5 cable. However, upon moving to the apartment I found that my ethernet connection no longer provides internet. This would seem like a mundane problem if not for: The router can see the computer on the network Windows 7 (the desktop's OS) detects no problems with the ethernet connection. Connections over the internet (i.e. browser windows, Pandora, etc.) do not immediately fail. Instead they load for 2 minutes and then finally give up. Devices connected over the Wifi (PS4, Laptop) access the internet just fine While removing the cat5 cable from my house, I accidentally damaged the locking tab but managed to bend it back into the appropriate position. I would suspect that a bad cat5 cable might be to blame if not for the above issues (thought I've heard bad cat5 cables cause the most nonsensical problems) and the fact that I tested the cat5 cable by having it share internet between my laptop (working internet) to my desktop and it functioned just fine and provided the desktop with internet. My ipconfig /all successfully finds a default gateway, DHCP server, and DNS server. What could possibly be causing the problem?

    Read the article

  • Changing MX records in named zone file

    - by Paul England
    I forgot how all this works. I have a GoDaddy account, using my own DNS and whatnot. I'm having trouble getting my email to work. They said I need to update my MX records. basically, I have the following. 184.168.30.42 is the domain's IP address, obviously. gamengai.com. 14400 IN NS n1 gamengai.com. 14400 IN NS n2 ns1 14400 IN A 184.168.30.42 ns2 14400 IN A 184.168.30.42 gamengai.com. 14400 IN A 184.168.30.42 localhost 14400 IN A 127.0.0.1 ftp 14400 IN A 184.168.30.42 www 14400 IN A 184.168.30.42 mail 14400 IN A 184.168.30.42 subdomain 14400 IN A 184.168.30.42 gamengai.com 14400 IN MX 10 mail Mail doesn't work though... they say to make the following change: 0 smtp.secureserver.net 10 mailstore1.secureserver.net So should the last line point to mailstore1.secureserver.net instead of mail in the last field? What about the other line? I had this working at one time, but it's totally gotten away from me. It's a virtual dedicated server and their support for this stuff is pretty bad... almost as bad as my admin skills since I went the programmer route.

    Read the article

  • Problem configuring Apache/Wordpress on subdomain

    - by friism
    I have two servers (one LAMP, one Windows) and one website with an associated blog. I'm running the main site on the Windows server, and the blog on the LAMP server, using Wordpress. The main site is accessed at http://folketsting.dk (it's in Danish -- sorry), the blog is accessed at http://blog.folketsting.dk (this link is bad, read on). The main site works fine. The blog works, except for the frontpage. Example of working post: http://blog.folketsting.dk/2009/10/09/ftlive/. The frontpage of the blog (http://blog.folketsting.dk) shows html from http://folketsting.dk however (except for the css and javascript). In fact, any other URL than the frontpage "works", and gets served by Wordpress e.g. http://blog.folketsting.dk/foo. I cannot -- for the life of me -- understand how the LAMP server running http://blog.folketsting.dk manages to serve up content generated by the Windows server running http://folketsting.dk. Looking at the response headers at http://blog.folketsting.dk, it's evident that the content originates from Apache, not IIS. I'm pretty sure it's not a DNS-issue, since the problem is evident even when accessing the raw IP, eg. http://130.226.142.141/ vs. http://130.226.142.141/foo. I'm thinking it's a bad config in Apache... any clues?

    Read the article

  • Windows product key is valid but wont activate

    - by pnongrata
    Last month, I needed to install Windows XP (Pro Version 2002 SP3) from a Reinstallation CD a co-worker gave me, and with a product key the IT team told me to use. Everything installed successfully and I have been using the XP machine for the last 30 days without any problems; however it kept reminding me to activate Windows, and of course, I never did (laziness). It now has me locked out of my machine and won't let me log in until I activate it. So I proceed to the Activation Screen which asks me: Do you want to activate Windows now? I choose "Yes, let's activate Windows over the Internet now.", and click the Next button. It now asks me: Do you want to register while you are activating Windows? I choose "No, I don't want to register now; let's just activate Windows.", and click the Next button. I now see the following screen: Notice how the title reads "Unauthorized product key", and how there are only 3 buttons: Telephone Remind me later Retry Please note that the Retry button is disabled until I enter the full product key that IT gave me, then it enables. However, at no point in time do I see a Next button, indicating that the product key was valid/successful. So instead, I just click the Retry button, and the screen refreshes, this time with a different title Incorrect product key Could something be wrong with the Windows XP reinstallation CD (do they "expire" after a certain amount of time, etc.)? Or is this the normal/typical workflow for what happens when you just have a bad product key? I ask because, after this happened I emailed IT and they supplied me whether several other product keys to try. But every time its the same result, same thing happening over again and again. So I guess it's possible that IT has given me several bad keys, but it's more likely something else is going on here. Any thoughts or ways to troubleshoot? Thanks in advance!

    Read the article

  • Force spin-down of external hard-drive on linux (raspberry pi)

    - by user258346
    I'm currently setting up a home-server using a Raspberry Pi with an external hard-disk connected via usb. However, my hard-drive will never spin down when being idle. I tried already the hints provided at raspberrypi.org ... without any success. 1.) sudo hdparm -S5 /dev/sda returns /dev/sda: setting standby to 5 (25 seconds) SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2.) sudo hdparm -y /dev/sda returns /dev/sda: issuing standby command SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...and 3.) sudo sdparm --flexible --command=stop /dev/sda returns /dev/sda: HDD 1234 ... without spin-down of the drive. I use the following hardware: Inateck FDU3C-2 dual Ports USB 3.0 HDD docking station Western Digital WD10EZRX Green 1TB Is it possible, that the sent spin-down-signals are somewhere overwritten/lost/ignored?

    Read the article

  • How to create RPM for 32-bit arch from a 64-bit arch server?

    - by Gnanam
    Our production server is running CentOS5 64-bit arch. Because there are no RPM available currently for SQLite latest version (v3.7.3), I created RPM using rpmbuild the very first time by following the instructions given here. I was able to successfully create RPM for 64-bit (x86_64) architecture. But am not able to create RPM for 32-bit (i386) architecture. It failed with the following errors: ... ... ... + ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --target=i386-redhat-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-threadsafe checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for x86_64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking for C compiler default output file name... configure: error: C compiler cannot create executables See `config.log' for more details. error: Bad exit status from /var/tmp/rpm-tmp.73141 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.73141 (%build) This is the command I called: rpmbuild --target i386 -ba sqlite.spec My question is, how do I create RPM for 32-bit arch from a 64-bit arch server?

    Read the article

  • Cause of slow download speed on a particular EC2 instance?

    - by James
    I have a networking issue I'm trying to solve. I have two EC2 instances, same zone, same type. On one of the two EC2 instances (the 'bad' instance), the download speed is really poor (200k/s), while on the other (the 'good' instance), the download speed is fine, comfortable at 30M/s +). To clarify, I'm talking about downloading files to the EC2 instance while ssh'd into the server, e.g running wget with a large file. I've tried different files, including S3 objects and a large linux ISO from elsewhere. Running ethtool eth0 only returns 'Link detected: yes' for both. When running ifconfig, both return the same for most part, aside from how the good instance shows no error packets yet the bad instance shows many: UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:168372370 errors:5075643 dropped:0 overruns:0 frame:0 TX packets:122116480 errors:0 dropped:0 overruns:0 carrier:0 Both servers are configured the same, at least were supposed to be. How can I go about diagnosing the cause for the slow download speed? Is there anything particular to EC2 instances that could cause this? Having trouble knowing where to start. Thanks for any help!

    Read the article

  • How to create btrfs RAID-1 filesystem (assertion error in mkfs.btrfs)?

    - by amcnabb
    I tried to make a btrfs RAID-1 filesystem in "degraded mode" by following the btrfs UseCases instructions but hit a fatal assertion error. Why is this failing, and is there any workaround? The instructions I followed are at: https://btrfs.wiki.kernel.org/articles/u/s/e/UseCases_8bd8.html The output of the mkfs.btrfs and btrfs filesystem show commands is: # mkfs.btrfs -m raid1 -d raid1 /dev/sdd1 /dev/loop1 WARNING! - Btrfs Btrfs v0.19 IS EXPERIMENTAL WARNING! - see http://btrfs.wiki.kernel.org before using failed to read /dev/sr0 adding device /dev/loop1 id 2 mkfs.btrfs: volumes.c:802: btrfs_alloc_chunk: Assertion `!(ret)' failed. zsh: abort (core dumped) mkfs.btrfs -m raid1 -d raid1 /dev/sdd1 /dev/loop1 # btrfs filesystem show failed to read /dev/sr0 Label: none uuid: 773908b8-acca-4c30-85c5-6642b06de22b Total devices 1 FS bytes used 28.00KB devid 1 size 223.13GB used 2.04GB path /dev/sda5 Label: none uuid: 0f06f1a8-5f5f-4b92-a55c-b827bcbcc840 Total devices 2 FS bytes used 24.00KB devid 2 size 2.00GB used 0.00 path /dev/loop1 devid 1 size 1.36TB used 20.00MB path /dev/sdd1 Btrfs Btrfs v0.19 # EDIT: It turns out that the filesystem isn't mountable: # mount /dev/sdd1 /mnt/big2 mount: wrong fs type, bad option, bad superblock on /dev/sdd1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # So, why did the mkfs fail, and is there any workaround?

    Read the article

  • Problems mounting HPUX LVM+VXFS filesystem on Linux

    - by golimar
    I have a physical disk from a HPUX system that I need to access from a Debian Linux for ia64 system. From the hpux-lvm-tools project I have the tools to access the HPUX LVMs (Linux LVM has a different format) and I also have the freevxfs driver. I know beforehand that the disk has three partitions, and that the biggest one contains LVM volumes, and some of those are VxFS filesystems. I can see the partitions: # cat /proc/partitions major minor #blocks name 8 32 143374744 sdc 8 33 512000 sdc1 8 34 142452736 sdc2 8 35 409600 sdc3 It finds a VG in one of the disk partitions: # ./vgscan_hpux On /dev/sdc2 - vg1328874723 # ./pvdisplay_hpux /dev/sdc2 PV General Information ---------------------- VG Creation Time Fri Feb 10 12:52:03 2012 Physical Volume ID 1766760336 1328874723 Volume Group ID 1766760336 1328874723 Physical Volumes in VG 1766760336 1328874723 VG Actication Mode 0 - LOCAL PE Size 64 MBs Lvol sizes ---------- lvol1 - 8 Extents - 512 MBs lvol2 - 192 Extents - 12288 MBs lvol3 - 16 Extents - 1024 MBs ... lvol21 - 13 Extents - 832 MBs lvol22 - 224 Extents - 14336 MBs lvol23 - 16 Extents - 1024 MBs Then I activate that VG and some new devices appear in my system: # ./pvactivate_hpux /dev/sdc2 VG vg1328874723 Activated succesfully with 23 lvols. # # ll /dev/mapper/ total 0 crw------- 1 root root 10, 59 Nov 26 16:08 control lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol1 -> ../dm-0 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol10 -> ../dm-9 ... lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol8 -> ../dm-7 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol9 -> ../dm-8 But: # mount /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: you must specify the filesystem type # mount -t vxfs /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: wrong fs type, bad option, bad superblock on /dev/mapper/vg1328874723-lvol18, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # lsmod |grep vxfs freevxfs 23905 0 I also tried to identify the raw data with the file command and it just says 'data': # file -s /dev/mapper/vg1328874723-lvol18 /dev/mapper/vg1328874723-lvol18: symbolic link to `../dm-17' # file -s /dev/dm-17 /dev/dm-17: data # Any clues?

    Read the article

  • MacBook Pro (OSX Lion) - shutdown automatically before reaching login screen

    - by mkk
    When I try to lunch my MacBook Pro I can see a progress bar on loading screen. It goes to 1/15 or something like this and then it shut downs - I cannot reach even login screen. It happened to me 2 months ago, I have 'fixed' this by formatting my hard drive and installing OSX (Lion) again. This time I think that situation is a little bit different - I am able to enter single-user mode by pressing cmd + s. I then type /sbin/fsck -yf, I get the error: ** Checking Journaled HFS Plus volume. The volume name is Macintosh HD ** Checking extents overflow file. ** Checking catalog file. Invalid node structure (4, 24704) ** The volume Macintosh HD could not be verified completely. /dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8 but when I type exit, I can the login screen and I can log in. I tried a lot of things, booting from recovery partition and choosing disk utility to repair the disc, but I get error that it cannot be repaired. I have googled for hours and the only real solution I have found was to buy Disc warrior that might fix the issue. Any other suggestions? Secondary question is what causes this issue? I thought the reason are bad sectors, but Smart Utility haven't found any. I found suggestion that RAM could cause this kind of issue as well, so I downloaded rember and made memory test - all tests passed. Right now I have used my solution of entering single-mode user and then typing exit, however I am not sure how long it will 'work'. Of course I have back-uped what I considered important. Thanks for the help in advance! UPDATE: I guess Smart Utility was not very useful, I mnaged to get input/output error, which I believe is equivalent to bad sector.

    Read the article

  • windows 7: Event 55 The file system structure on the disk is corrupt and unusable

    - by Radio
    Here is a real bad one! Windows 7 RTM with SP1 installed [Version 6.1.7601]. Recently tried to delete some folder on my hard drive and Windows prompted "Error 0x80070570: The file or directory is corrupted and unreadable", and at the same time placed an Event 55 describing "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on \Device\HarddiskVolume2." Ran chkdsk, first with /f option, then with /r option. Result in both cases was: no errors found, 0 bad sectors. No problems chkdsk found at all! Went through StackExchange, Google and spent over 6 hours on this. Still cannot figure out the problem. Re-installing/Re-Formatting is not an option! What did I try: Hotfix - Windows6.1-KB982927-x64.msu - gave me an error about incompatibility with my computer, however it totally matches my system. CRC of hotfix was ok. Windows Repair Console found startup errors and fixed those, but this didn't help an issue, even by running chkdsk c: /R from it. http://support.microsoft.com/kb/246026 does not promise anything good. sfc /scannow does not help too. Replaced hard drive by cloning an old one using True Image, repeated all steps above. At the same time, some minor glitches started to appear in my Windows, like side panel and notification area settings are getting reset. Goal is to delete the folder and get rid of Event 55. Sounds like NTFS bug. Please help. This is completely ridiculous.

    Read the article

  • Diagnosing a BSOD involving USB

    - by David Ebbo
    [Running Win7 Ultimate 64 bit] My new HP Pavilion Elite HPE-450t has been plagued by BSDO crashes since I got it about 5 weeks ago. The crashes are somewhat rare, sometimes not occurring for 3 or 4 days. I have spent a lot of time trying to isolate the device that could be at fault, but I have seen crashes with only the keyboard and mouse plugged in (as USB devices), and I tried two sets of keyboard/mouse, so I'm running out of ideas. :( The WhoCrashed tool gave this info about my latest BSOD: crash dump file: C:\Windows\Minidump\121310-11887-01.dmp This was probably caused by the following module: usbport.sys (USBPORT+0x2DE4E) Bugcheck code: 0xFE (0x5, 0xFFFFFA8008F571A0, 0x80863B34, 0xFFFFFA80092F2510) Error: BUGCODE_USB_DRIVER file path: C:\Windows\system32\drivers\usbport.sys product: Microsoft® Windows® Operating System company: Microsoft Corporation description: USB 1.1 & 2.0 Port Driver Bug check description: This indicates that an error has occurred in a Universal Serial Bus (USB) driver. The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time. I looked at http://msdn.microsoft.com/en-us/library/ff560407(VS.85).aspx, and for Parameter1 = 0x5, it says "A hardware failure has occurred due to a bad physical address found in a hardware data structure. This is not due to a driver bug". Should I conclude that it's a hardware issue in the machine itself, rather than a bad USB driver or USB device? Here is the MiniDump, in case someone can get more info out of it: http://ewt52q.blu.livefilestore.com/y1peS4Ce8nSK1SXghzMDoxDWXlaEu-EKCJsv25y8y5DXXIUzZ9U0_tYgFJXd939fykwa0zRmx98IW0PYG18GioqKAuARYjtspSA/121310-11887-01.dmp?download&psid=2

    Read the article

  • How to find the real IP to which IPVS is routing a virtual IP

    - by Wayne Conrad
    I'm trying to find a problem server hiding behind a virtual IP (using LVS/ipvs). I've got a test program that sends requests to the virtual IP until it gets the bad response, but how can I tell to which real IP a request to the virtual IP got routed? On the box doing the virtual IP magic, here's the virtual IP configuration (for the service I care about): IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn ... TCP 10.1.0.254:5025 nq -> 10.1.0.5:5025 Route 1 0 1 -> 10.1.0.6:5025 Route 1 0 5 -> 10.1.0.7:5025 Route 1 0 2 -> 10.1.0.9:5025 Local 1 0 3 -> 10.1.0.11:5025 Route 1 0 3 ... My client program is sending TCP requests to 10.1.0.254:5025, usually getting a good response but sometimes a bad response. With this few servers, I could send my request to each server in turn until I discover the culprit, but I wonder if that technique will scale as we add servers. What means exist for me to find out where requests got routed? Kernel: Linux 2.6.32 OS: Debian testing (whatever that's called these days). ipvsadm is version 1.25, compiled with ipvs v1.2.1

    Read the article

  • Microsoft Windows DHCP: Steering IPv4 clients into specific scopes based on MAC

    - by Easter Sunshine
    We have visitors on our campus who bring their own laptops and devices and use our wireless and wired networks. When we receive a copyright infringement notice (typically BitTorrenting), we are required to quarantine that MAC address so that it no longer has Internet access. No matter what website it tries to visit, it is sent to a web page explaining to the user that the device has been quarantined. We have thus far implemented this in ISC DHCP on Linux. We have multiple VLANs with one or more public-IP subnets and one RFC1918 quarantine subnet each. All clients are leased IPs in the public-IP subnet(s) unless you're in a list of known bad MACs. Then, you are sent to the quarantine subnet so that your traffic is unroutable on the Internet (you are isolated by subnet only, not by VLAN). We would like to move to Windows DHCP in light of the IPAM role but I cannot figure out how to replicate this in Windows DHCP 2012 (Assign DHCP IPs for specific MAC prefixes on Windows Server 2008 R2 suggests it was not possible in 2008 R2), even while using policies. So here's what I'd like: The administrator/help desk provides and maintains a list of MAC addresses that are to be quarantined. The DHCP server places those MACs into the quarantine subnet on the respective VLAN, no matter which VLAN the client is in. I don't think reservations would work: We currently have about 300 registered bad MACs and about 12 VLANs. I don't want to make 300 x 12 reservations nor have to add 12 reservations per new MAC address. Not to mention all of the quarantine subnets are /24s. We do not have NPS/NAC. You do not have to register your MAC address get network access. We use Cisco routers/switches. Thanks.

    Read the article

  • transparent git-svn gateway

    - by azatoth
    Currently we have an subversion repository with the following layout: /trunc /group1 /proj1 /proj2 group2 /proj3 /etc.. /tags /group1 /proj1 /proj2 group2 /proj3 /etc.. /branch /anything temporary I believe this is an rather bad layout, but at the moment it's difficult to change it fully. Personally I dislike subversion, due mostly the long time it takes to check history, and also that branching and merging are cumbersome etc. so I really want to use git instead. Sadly we cant just switch to git as the mental capacity for some might be to overwhelming, so I was looking into git-svn to see if I could practically use that to solve the issue. Sadly that directly ends up in a bad situation as I want to break down each project into one git repo, and I don't want to have to recreate the git-svn checkout on each computer I work on. so I though perhaps there is an possibility to create some sort of transparent git ?? svn proxy/gateway, so that an push to that repo "commits" to the svn repo, and an commit to the svn repo updates the git repo. Google hasn't been my friend, have only found generic usage help to use git-svn, so I ask you if you have some good ideas to accomplish this.

    Read the article

  • Trouble cloning a Macbook Pro hard drive

    - by Mirko Froehlich
    I am trying to upgrade the 250GB hard drive in my MacBook Pro (early 2008 model) to a 750GB drive. I have connected the new drive via an external USB enclosure. The drive is recognized fine, I can format it, etc. However, every time I try to clone the drive, I am getting Input/Output errors. Before the clone operation, I have verified both the internal and the external drive using Disk Utility, and they both check out fine. After the clone operation, the external drive shows multiple "Invalid node structure" errors: I have tried two approaches for cloning the drive: Using Disk Utility, by starting from the OSX install DVD Using Carbon Copy Cloner The outcome is the same in both cases. The Carbon Copy Cloner logs show a handful of the following types of errors: rsync: mkstemp "<... an external filename ...>" failed: Input/output error (5) rsync: stat "<... an external filename ...>" failed: Input/output error (5) The actual files affected seem to be different across different runs of the application. Before the last run, I used Disk Utility to (once more) reformat the external drive and explicitly overwrite it with zeros, but this made no difference. I also tried running a surface scan in Tech Tool Pro overnight. It got about 2/3 of the way through before I had to disconnect the drive (had to take my MacBook Pro to work), but so far it didn't report any bad blocks. Assuming it scans the drive in the same order in which blocks would be allocated during actual use, it seems like if bad blocks were to blame for the clone failures, they should have been found already (given that the source drive is only 250GB). As a last attempt, I may try SuperDuper as well, although my understanding is that it uses the same underlying rsync approach as Carbon Copy Cloner, so it's unlikely to perform any better. Are there any other things I should try before I send the drive in for a replacement? Could these problems be caused by my internal drive, even though it works fine and checks out fine in Disk Utility?

    Read the article

  • Running Debian as guest operating system on a Hyper-V VM

    - by kce
    Hello. Layer-9 considerations are prompting a migration from Citrix XenServer to Hyper-V as our shop's virtualization platform of choice. This will require me to migrate our existing virtual machines from XenServer to Hyper-V. A hand full of these VMs are running Debian. Unfortunately, Debian does not seem to be on the list of approved/supported guest operating systems. In fact it seems that running Debian as a guest operating system of is rather difficult, although apparently not impossible. I have two interrelated questions: Does anyone have any experience running a Debian guest on Hyper-V? Is it one of those things where it just will not work at all or is more along the lines of "it will probably work fine, but we won't support it". Any experience here, positive or negative, would be helpful. How much of a bad idea is it to deviate from Hyper-V's list of supported guest operating systems? Again, is it either basically asking for Bad Things (TM) to happen or is just another instance of "it will probably work fine, but we won't support it"? Or is it somewhere in the middle? Thank you.

    Read the article

  • dovecot login issue with plain passwords

    - by user3028
    I am having an odd problem in dovecot, the first time I try to login via telnet dovecot gives a error, the second time it works, both within the same telnet session. This is the telnet session, note the 'BAD Error in IMAP command received by server' and the "a OK" just after that : telnet 192.168.1.2 143 * OK Waiting for authentication process to respond.. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN] Dovecot ready. a login someUserLogin supersecretpassword * BAD Error in IMAP command received by server. a login someUserLogin supersecretpassword a OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS] Logged in dovecot configuration >dovecot -n # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.5.0-34-generic x86_64 Ubuntu 12.04.2 LTS auth_debug = yes auth_verbose = yes disable_plaintext_auth = no login_trusted_networks = 192.168.1.0/16 mail_location = maildir:~/Maildir passdb { driver = pam } protocols = " imap" ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } This is the log file: Jul 3 12:27:51 linuxServer dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Jul 3 12:27:51 linuxServer dovecot: auth: Debug: auth client connected (pid=23499) Jul 3 12:28:06 linuxServer dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011secured#011no-penalty#011lip=192.168.1.2#011rip=192.169.1.3#011lport=143#011rport=50438#011resp=<hidden> Jul 3 12:28:06 linuxServer dovecot: auth-worker: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Jul 3 12:28:06 linuxServer dovecot: auth-worker: Debug: pam(someUserLogin,192.169.1.3): lookup service=dovecot Jul 3 12:28:06 linuxServer dovecot: auth-worker: Debug: pam(someUserLogin,192.169.1.3): #1/1 style=1 msg=Password: Jul 3 12:28:06 linuxServer dovecot: auth: Debug: client out: OK#0111#011user=someUserLogin Jul 3 12:28:06 linuxServer dovecot: auth: Debug: master in: REQUEST#0111823473665#01123499#0111#0113a58da53e091957d3cd306ac4114f0b9 Jul 3 12:28:06 linuxServer dovecot: auth: Debug: passwd(someUserLogin,192.169.1.3): lookup Jul 3 12:28:06 linuxServer dovecot: auth: Debug: master out: USER#0111823473665#011someUserLogin#011system_groups_user=someUserLogin#011uid=1000#011gid=1000#011home=/home/someUserLogin Jul 3 12:28:06 linuxServer dovecot: imap-login: Login: user=<someUserLogin>, method=PLAIN, rip=192.169.1.3, lip=192.168.1.2, mpid=23503, secured

    Read the article

  • Unable to receive emails from Ubuntu postfix mail server

    - by Paddington
    I am unable to receive emails on an Ubuntu 11.04 server running postfix with the Plesk control panel. I can't see the mails even on webmail. I am able to send emails and am not getting any error messages on the email client when I try to receive. Here is the output of the logs: *tail -f /usr/local/psa/var/log/maillog Aug 29 10:38:31 cp9 postfix/tlsmgr[3811]: fatal: open database /var/lib/postfix/smtpd_scache.db: Invalid argument Aug 29 10:38:32 cp9 postfix/master[27738]: warning: process /usr/lib/postfix/tlsmgr pid 3811 exit status 1 Aug 29 10:38:32 cp9 postfix/master[27738]: warning: /usr/lib/postfix/tlsmgr: bad command startup -- throttling Aug 29 10:38:36 cp9 pop3d: Connection, ip=[::ffff:196.201.7.158] Aug 29 10:38:36 cp9 pop3d: IMAP connect from @ [::ffff:196.201.7.158]INFO: LOGIN, [email protected], ip=[::ffff:196.201.7.158] Aug 29 10:38:37 cp9 pop3d: 1346229517.874008 LOGOUT, [email protected], ip=[::ffff:196.201.7.158], top=0, retr=0, time=1, rcvd=24, sent=1716, maildir=/var/qmail/mailnames/essentialhuku.co.za/earle/Maildir Aug 29 10:14:05 cp9 postfix/tlsmgr[1133]: fatal: open database /var/lib/postfix/smtpd_scache.db: Invalid argument Aug 29 10:14:06 cp9 postfix/master[27738]: warning: process /usr/lib/postfix/tlsmgr pid 1133 exit status 1 Aug 29 10:14:06 cp9 postfix/master[27738]: warning: /usr/lib/postfix/tlsmgr: bad command startup -- throttling Aug 29 10:14:08 cp9 pop3d: Connection, ip=[::ffff:196.201.7.158

    Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >