Search Results

Search found 61071 results on 2443 pages for 'system io log'.

Page 90/2443 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• Changing the Operating System with only Ubuntu installed

  - by Games Brainiac

  I really wanted to dive into the world of Open Source operating systems, so I downloaded the latest version of Ubuntu (13.10), and installed it on a clean(no operating system installed, absolutely nothing) Lenovo ThinkPad machine. After a few days, I wanted to try out a different Operating System (Elementary OS). I downloaded the ISO file, burned it to a USB, tested that the USB booted from a different computer (I have 2, one is the Lenovo, the other a HP). I was able to get the bootscreen, and everything worked like a charm after I set the BIOS to boot from USB Disk Drive instead of HD. After this, I went back to Lenovo, and tried to open up the boot menu, by pressing F12, so that I could load from a temporary device. To my surprise, nothing but the HD was listed. There was no Optical Drive, No USB Drive, absolutely nothing. So, I thought that these devices were probably disabled. So I went into my BIOS and checked to see what was the case. I saw that all my devices were enabled. USB and all the other devices such as network cable and the rest were all enabled. So, I thought this probably had something to do wit UEFI and Legacy Boot options. So, I made sure that both were enabled. This did not solve the problem either. Again, I got nothing but the option to boot from my Hard Disk. I thought the USB had to be at fault. I tried different ports, but to no avail. Next, I tried with a Live CD, which had Ubuntu on it. This failed too. I simply could not boot from anything other than my hard disk. Okay, so at this point, I was pretty desperate, so I installed Boot-Repair through: sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install boot-repair What this did is lead me to GRUB. Ideally, its just a screen that gives me the option to load from Ubuntu or Advanced Settings. The Advanced settings had nothing but Ubuntu options in it. So, I kept on pressing ESC and that led me to the the grub console, and thats where I am right now with my Lenovo. I've also tried updating the BIOS, but Lenovo only has packages for Red Hat and Windows. So, a dead end there too. Right now, I need to know if there is any way that I can just delete everything from my Lenovo? I want to revert it back to its blank factory condition. How can I achieve this? I have tried to elaborate my problem as best I could. If there is any important information that I've missed out, please do not hesitate to leave a comment. I would have included some screen shots, but BIOS screen shots are a little hard to manage. However, I can provide a camera Image of the boot screen if needed (doing that as we speak).

  Read the article

• SQL Server rolling forward lots of transactions, what should I look at?

  - by Anthony D

  I am running SQL Server Express on a Windows XP Embedded box. It runs for a day or two, doing some transactional processing for a POS type system, and with another system pulling data out to an OLAP DB for processing. After a while, I see in the event viewer the sequence SQL Server puts out when it restarts, copy rights, command line parameters, and so on. It seems like that coincides with our OLAP process crashing. I then see that when it restarts our transaction DB, it does a recovery, pulling in 10K or so in transactions that need to be rolled forward. Does this mean SQL has crashed? I don't really see much to indicate what happened. Update 1 I noticed I have my memory limit set to 1MB per query and 2TB for the server. These are the defaults. I only have one GB in the box. We have seen SQL crash a whole box by just using all the system memory. In this case though the whole box is up when we get to it.

  Read the article

• not able to write log file to specified path(Microsoft Enterprise Library Logging)

  - by prince23

  hi, i am trying to implement the logging Configuration using Microsoft Enterprise Library Logging class Program { static void Main(string[] args) { LogEntry entry = new LogEntry() { Message = "Hello Ent. Lib. Logging" }; Logger.Write(entry); } } here the entry conyain she details. but these details are not written in the file i web config i have the settings done like this. <?xml version="1.0" encoding="utf-8"?> <configuration> <configSections> <section name="loggingConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.LoggingSettings, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <section name="exceptionHandling" type="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Configuration.ExceptionHandlingSettings, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> </configSections> <loggingConfiguration name="Logging Application Block" tracingEnabled="true" defaultCategory="General" logWarningsWhenNoCategoriesMatch="true"> <listeners> <add fileName="C:\Inetpub\wwwroot\trace.log" header="----------------------------------------" footer="----------------------------------------" formatter="" listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.FlatFileTraceListenerData, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" traceOutputOptions="None" filter="All" type="Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FlatFileTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="FlatFile TraceListener" /> <add source="Enterprise Library Logging" formatter="Text Formatter" log="Application" machineName="" listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.FormattedEventLogTraceListenerData, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" traceOutputOptions="None" filter="All" type="Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FormattedEventLogTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="Formatted EventLog TraceListener" /> </listeners> <formatters> <add template="Timestamp: {timestamp}&#xD;&#xA;Message: {message}&#xD;&#xA;Category: {category}&#xD;&#xA;Priority: {priority}&#xD;&#xA;EventId: {eventid}&#xD;&#xA;Severity: {severity}&#xD;&#xA;Title:{title}&#xD;&#xA;Machine: {machine}&#xD;&#xA;Application Domain: {appDomain}&#xD;&#xA;Process Id: {processId}&#xD;&#xA;Process Name: {processName}&#xD;&#xA;Win32 Thread Id: {win32ThreadId}&#xD;&#xA;Thread Name: {threadName}&#xD;&#xA;Extended Properties: {dictionary({key} - {value}&#xD;&#xA;)}" type="Microsoft.Practices.EnterpriseLibrary.Logging.Formatters.TextFormatter, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="Text Formatter" /> </formatters> <categorySources> <add switchValue="All" name="General"> <listeners> <add name="Formatted EventLog TraceListener" /> </listeners> </add> </categorySources> <specialSources> <allEvents switchValue="All" name="All Events" /> <notProcessed switchValue="All" name="Unprocessed Category" /> <errors switchValue="All" name="Logging Errors &amp; Warnings"> <listeners> <add name="Formatted EventLog TraceListener" /> </listeners> </errors> </specialSources> </loggingConfiguration> <exceptionHandling> <exceptionPolicies> <add name="Exception Policy"> <exceptionTypes> <add type="System.Exception, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" postHandlingAction="NotifyRethrow" name="Exception" /> </exceptionTypes> </add> </exceptionPolicies> </exceptionHandling> </configuration> i am trying by best to solve this from past 2 days. if any one knw what is the issue here. why my log file is not written in the specified path. and even the details of log are not written in the file path fileName="C:\Inetpub\wwwroot\trace.log"

  Read the article

• C# Web Service gets stuck waiting for lock, does not return

  - by blue

  We have a C#(2.0) application which talks to our server(in java) via web services. Lately we have started seeing following behavior in (ONLY)one of our lab machines(XP): Once in a while(every few days), one of the webservice request will just get stuck, will not return or timeout. Following is the stacktrace where it seem to be stuck. Have no clue what is going on here. Any pointer would be of great help. ESP EIP 05eceeec 7c90eb94 [GCFrame: 05eceeec] 05ecefbc 7c90eb94 [HelperMethodFrame_1OBJ: 05ecefbc] System.Threading.Monitor.Enter(System.Object) 05ecf014 7a5b0034 System.Net.ConnectionGroup.Disassociate(System.Net.Connection) 05ecf040 7a5aeaa7 System.Net.Connection.PrepareCloseConnectionSocket(System.Net.ConnectionReturnResult ByRef) 05ecf0a4 7a5ac0e1 System.Net.Connection.ReadStartNextRequest(System.Net.WebRequest, System.Net.ConnectionReturnResult ByRef) 05ecf0e8 7a5b1119 System.Net.ConnectStream.CallDone(System.Net.ConnectionReturnResult) 05ecf0fc 7a5b3b5a System.Net.ConnectStream.ReadChunkedSync(Byte[], Int32, Int32) 05ecf114 7a5b2b90 System.Net.ConnectStream.ReadWithoutValidation(Byte[], Int32, Int32, Boolean) 05ecf160 7a5b29cc System.Net.ConnectStream.Read(Byte[], Int32, Int32) 05ecf1a0 79473cab System.IO.StreamReader.ReadBuffer(Char[], Int32, Int32, Boolean ByRef) 05ecf1c4 79473bd6 System.IO.StreamReader.Read(Char[], Int32, Int32) 05ecf1e8 69c29119 System.Xml.XmlTextReaderImpl.ReadData() 05ecf1f8 69c2ad70 System.Xml.XmlTextReaderImpl.ParseDocumentContent() 05ecf20c 69c292d7 System.Xml.XmlTextReaderImpl.Read() 05ecf21c 69c2929d System.Xml.XmlTextReader.Read() 05ecf220 6991b3e7 System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(System.Web.Services.Protocols.SoapClientMessage, System.Net.WebResponse, System.IO.Stream, Boolean) 05ecf268 69919ed1 System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(System.String, System.Object[])

  Read the article

• A Communication System for XAML Applications

  - by psheriff

  In any application, you want to keep the coupling between any two or more objects as loose as possible. Coupling happens when one class contains a property that is used in another class, or uses another class in one of its methods. If you have this situation, then this is called strong or tight coupling. One popular design pattern to help with keeping objects loosely coupled is called the Mediator design pattern. The basics of this pattern are very simple; avoid one object directly talking to another object, and instead use another class to mediate between the two. As with most of my blog posts, the purpose is to introduce you to a simple approach to using a message broker, not all of the fine details. IPDSAMessageBroker Interface As with most implementations of a design pattern, you typically start with an interface or an abstract base class. In this particular instance, an Interface will work just fine. The interface for our Message Broker class just contains a single method “SendMessage” and one event “MessageReceived”. public delegate void MessageReceivedEventHandler( object sender, PDSAMessageBrokerEventArgs e); public interface IPDSAMessageBroker{  void SendMessage(PDSAMessageBrokerMessage msg);   event MessageReceivedEventHandler MessageReceived;} PDSAMessageBrokerMessage Class As you can see in the interface, the SendMessage method requires a type of PDSAMessageBrokerMessage to be passed to it. This class simply has a MessageName which is a ‘string’ type and a MessageBody property which is of the type ‘object’ so you can pass whatever you want in the body. You might pass a string in the body, or a complete Customer object. The MessageName property will help the receiver of the message know what is in the MessageBody property. public class PDSAMessageBrokerMessage{  public PDSAMessageBrokerMessage()  {  }   public PDSAMessageBrokerMessage(string name, object body)  {    MessageName = name;    MessageBody = body;  }   public string MessageName { get; set; }   public object MessageBody { get; set; }} PDSAMessageBrokerEventArgs Class As our message broker class will be raising an event that others can respond to, it is a good idea to create your own event argument class. This class will inherit from the System.EventArgs class and add a couple of additional properties. The properties are the MessageName and Message. The MessageName property is simply a string value. The Message property is a type of a PDSAMessageBrokerMessage class. public class PDSAMessageBrokerEventArgs : EventArgs{  public PDSAMessageBrokerEventArgs()  {  }   public PDSAMessageBrokerEventArgs(string name,     PDSAMessageBrokerMessage msg)  {    MessageName = name;    Message = msg;  }   public string MessageName { get; set; }   public PDSAMessageBrokerMessage Message { get; set; }} PDSAMessageBroker Class Now that you have an interface class and a class to pass a message through an event, it is time to create your actual PDSAMessageBroker class. This class implements the SendMessage method and will also create the event handler for the delegate created in your Interface. public class PDSAMessageBroker : IPDSAMessageBroker{  public void SendMessage(PDSAMessageBrokerMessage msg)  {    PDSAMessageBrokerEventArgs args;     args = new PDSAMessageBrokerEventArgs(      msg.MessageName, msg);     RaiseMessageReceived(args);  }   public event MessageReceivedEventHandler MessageReceived;   protected void RaiseMessageReceived(    PDSAMessageBrokerEventArgs e)  {    if (null != MessageReceived)      MessageReceived(this, e);  }} The SendMessage method will take a PDSAMessageBrokerMessage object as an argument. It then creates an instance of a PDSAMessageBrokerEventArgs class, passing to the constructor two items: the MessageName from the PDSAMessageBrokerMessage object and also the object itself. It may seem a little redundant to pass in the message name when that same message name is part of the message, but it does make consuming the event and checking for the message name a little cleaner – as you will see in the next section. Create a Global Message Broker In your WPF application, create an instance of this message broker class in the App class located in the App.xaml file. Create a public property in the App class and create a new instance of that class in the OnStartUp event procedure as shown in the following code: public partial class App : Application{  public PDSAMessageBroker MessageBroker { get; set; }   protected override void OnStartup(StartupEventArgs e)  {    base.OnStartup(e);     MessageBroker = new PDSAMessageBroker();  }} Sending and Receiving Messages Let’s assume you have a user control that you load into a control on your main window and you want to send a message from that user control to the main window. You might have the main window display a message box, or put a string into a status bar as shown in Figure 1. Figure 1: The main window can receive and send messages The first thing you do in the main window is to hook up an event procedure to the MessageReceived event of the global message broker. This is done in the constructor of the main window: public MainWindow(){  InitializeComponent();   (Application.Current as App).MessageBroker.     MessageReceived += new MessageReceivedEventHandler(       MessageBroker_MessageReceived);} One piece of code you might not be familiar with is accessing a property defined in the App class of your XAML application. Within the App.Xaml file is a class named App that inherits from the Application object. You access the global instance of this App class by using Application.Current. You cast Application.Current to ‘App’ prior to accessing any of the public properties or methods you defined in the App class. Thus, the code (Application.Current as App).MessageBroker, allows you to get at the MessageBroker property defined in the App class. In the MessageReceived event procedure in the main window (shown below) you can now check to see if the MessageName property of the PDSAMessageBrokerEventArgs is equal to “StatusBar” and if it is, then display the message body into the status bar text block control. void MessageBroker_MessageReceived(object sender,   PDSAMessageBrokerEventArgs e){  switch (e.MessageName)  {    case "StatusBar":      tbStatus.Text = e.Message.MessageBody.ToString();      break;  }} In the Page 1 user control’s Loaded event procedure you will send the message “StatusBar” through the global message broker to any listener using the following code: private void UserControl_Loaded(object sender,  RoutedEventArgs e){  // Send Status Message  (Application.Current as App).MessageBroker.    SendMessage(new PDSAMessageBrokerMessage("StatusBar",      "This is Page 1"));} Since the main window is listening for the message ‘StatusBar’, it will display the value “This is Page 1” in the status bar at the bottom of the main window. Sending a Message to a User Control The previous example sent a message from the user control to the main window. You can also send messages from the main window to any listener as well. Remember that the global message broker is really just a broadcaster to anyone who has hooked into the MessageReceived event. In the constructor of the user control named ucPage1 you can hook into the global message broker’s MessageReceived event. You can then listen for any messages that are sent to this control by using a similar switch-case structure like that in the main window. public ucPage1(){  InitializeComponent();   // Hook to the Global Message Broker  (Application.Current as App).MessageBroker.    MessageReceived += new MessageReceivedEventHandler(      MessageBroker_MessageReceived);} void MessageBroker_MessageReceived(object sender,  PDSAMessageBrokerEventArgs e){  // Look for messages intended for Page 1  switch (e.MessageName)  {    case "ForPage1":      MessageBox.Show(e.Message.MessageBody.ToString());      break;  }} Once the ucPage1 user control has been loaded into the main window you can then send a message using the following code: private void btnSendToPage1_Click(object sender,  RoutedEventArgs e){  PDSAMessageBrokerMessage arg =     new PDSAMessageBrokerMessage();   arg.MessageName = "ForPage1";  arg.MessageBody = "Message For Page 1";   // Send a message to Page 1  (Application.Current as App).MessageBroker.SendMessage(arg);} Since the MessageName matches what is in the ucPage1 MessageReceived event procedure, ucPage1 can do anything in response to that event. It is important to note that when the message gets sent it is sent to all MessageReceived event procedures, not just the one that is looking for a message called “ForPage1”. If the user control ucPage1 is not loaded and this message is broadcast, but no other code is listening for it, then it is simply ignored. Remove Event Handler In each class where you add an event handler to the MessageReceived event you need to make sure to remove those event handlers when you are done. Failure to do so can cause a strong reference to the class and thus not allow that object to be garbage collected. In each of your user control’s make sure in the Unloaded event to remove the event handler. private void UserControl_Unloaded(object sender, RoutedEventArgs e){  if (_MessageBroker != null)    _MessageBroker.MessageReceived -=         _MessageBroker_MessageReceived;} Problems with Message Brokering As with most “global” classes or classes that hook up events to other classes, garbage collection is something you need to consider. Just the simple act of hooking up an event procedure to a global event handler creates a reference between your user control and the message broker in the App class. This means that even when your user control is removed from your UI, the class will still be in memory because of the reference to the message broker. This can cause messages to still being handled even though the UI is not being displayed. It is up to you to make sure you remove those event handlers as discussed in the previous section. If you don’t, then the garbage collector cannot release those objects. Instead of using events to send messages from one object to another you might consider registering your objects with a central message broker. This message broker now becomes a collection class into which you pass an object and what messages that object wishes to receive. You do end up with the same problem however. You have to un-register your objects; otherwise they still stay in memory. To alleviate this problem you can look into using the WeakReference class as a method to store your objects so they can be garbage collected if need be. Discussing Weak References is beyond the scope of this post, but you can look this up on the web. Summary In this blog post you learned how to create a simple message broker system that will allow you to send messages from one object to another without having to reference objects directly. This does reduce the coupling between objects in your application. You do need to remember to get rid of any event handlers prior to your objects going out of scope or you run the risk of having memory leaks and events being called even though you can no longer access the object that is responding to that event. NOTE: You can download the sample code for this article by visiting my website at http://www.pdsa.com/downloads. Select “Tips & Tricks”, then select “A Communication System for XAML Applications” from the drop down list.

  Read the article

• Security in Software

  The term security has many meanings based on the context and perspective in which it is used. Security from the perspective of software/system development is the continuous process of maintaining confidentiality, integrity, and availability of a system, sub-system, and system data. This definition at a very high level can be restated as the following: Computer security is a continuous process dealing with confidentiality, integrity, and availability on multiple layers of a system. Key Aspects of Software Security Integrity Confidentiality Availability Integrity within a system is the concept of ensuring only authorized users can only manipulate information through authorized methods and procedures. An example of this can be seen in a simple lead management application.  If the business decided to allow each sales member to only update their own leads in the system and sales managers can update all leads in the system then an integrity violation would occur if a sales member attempted to update someone else’s leads. An integrity violation occurs when a team member attempts to update someone else’s lead because it was not entered by the sales member.  This violates the business rule that leads can only be update by the originating sales member. Confidentiality within a system is the concept of preventing unauthorized access to specific information or tools.  In a perfect world the knowledge of the existence of confidential information/tools would be unknown to all those who do not have access. When this this concept is applied within the context of an application only the authorized information/tools will be available. If we look at the sales lead management system again, leads can only be updated by originating sales members. If we look at this rule then we can say that all sales leads are confidential between the system and the sales person who entered the lead in to the system. The other sales team members would not need to know about the leads let alone need to access it. Availability within a system is the concept of authorized users being able to access the system. A real world example can be seen again from the lead management system. If that system was hosted on a web server then IP restriction can be put in place to limit access to the system based on the requesting IP address. If in this example all of the sales members where accessing the system from the 192.168.1.23 IP address then removing access from all other IPs would be need to ensure that improper access to the system is prevented while approved users can access the system from an authorized location. In essence if the requesting user is not coming from an authorized IP address then the system will appear unavailable to them. This is one way of controlling where a system is accessed. Through the years several design principles have been identified as being beneficial when integrating security aspects into a system. These principles in various combinations allow for a system to achieve the previously defined aspects of security based on generic architectural models. Security Design Principles Least Privilege Fail-Safe Defaults Economy of Mechanism Complete Mediation Open Design Separation Privilege Least Common Mechanism Psychological Acceptability Defense in Depth Least Privilege Design PrincipleThe Least Privilege design principle requires a minimalistic approach to granting user access rights to specific information and tools. Additionally, access rights should be time based as to limit resources access bound to the time needed to complete necessary tasks. The implications of granting access beyond this scope will allow for unnecessary access and the potential for data to be updated out of the approved context. The assigning of access rights will limit system damaging attacks from users whether they are intentional or not. This principle attempts to limit data changes and prevents potential damage from occurring by accident or error by reducing the amount of potential interactions with a resource. Fail-Safe Defaults Design PrincipleThe Fail-Safe Defaults design principle pertains to allowing access to resources based on granted access over access exclusion. This principle is a methodology for allowing resources to be accessed only if explicit access is granted to a user. By default users do not have access to any resources until access has been granted. This approach prevents unauthorized users from gaining access to resource until access is given. Economy of Mechanism Design PrincipleThe Economy of mechanism design principle requires that systems should be designed as simple and small as possible. Design and implementation errors result in unauthorized access to resources that would not be noticed during normal use. Complete Mediation Design PrincipleThe Complete Mediation design principle states that every access to every resource must be validated for authorization. Open Design Design PrincipleThe Open Design Design Principle is a concept that the security of a system and its algorithms should not be dependent on secrecy of its design or implementation Separation Privilege Design PrincipleThe separation privilege design principle requires that all resource approved resource access attempts be granted based on more than a single condition. For example a user should be validated for active status and has access to the specific resource. Least Common Mechanism Design PrincipleThe Least Common Mechanism design principle declares that mechanisms used to access resources should not be shared. Psychological Acceptability Design PrincipleThe Psychological Acceptability design principle refers to security mechanisms not make resources more difficult to access than if the security mechanisms were not present Defense in Depth Design PrincipleThe Defense in Depth design principle is a concept of layering resource access authorization verification in a system reduces the chance of a successful attack. This layered approach to resource authorization requires unauthorized users to circumvent each authorization attempt to gain access to a resource. When designing a system that requires meeting a security quality attribute architects need consider the scope of security needs and the minimum required security qualities. Not every system will need to use all of the basic security design principles but will use one or more in combination based on a company’s and architect’s threshold for system security because the existence of security in an application adds an additional layer to the overall system and can affect performance. That is why the definition of minimum security acceptably is need when a system is design because this quality attributes needs to be factored in with the other system quality attributes so that the system in question adheres to all qualities based on the priorities of the qualities. Resources: Barnum, Sean. Gegick, Michael. (2005). Least Privilege. Retrieved on August 28, 2011 from https://buildsecurityin.us-cert.gov/bsi/articles/knowledge/principles/351-BSI.html Saltzer, Jerry. (2011). BASIC PRINCIPLES OF INFORMATION PROTECTION. Retrieved on August 28, 2011 from  http://web.mit.edu/Saltzer/www/publications/protection/Basic.html Barnum, Sean. Gegick, Michael. (2005). Defense in Depth. Retrieved on August 28, 2011 from  https://buildsecurityin.us-cert.gov/bsi/articles/knowledge/principles/347-BSI.html Bertino, Elisa. (2005). Design Principles for Security. Retrieved on August 28, 2011 from  http://homes.cerias.purdue.edu/~bhargav/cs526/security-9.pdf

  Read the article

• VMWare Esxi Looking for Bottlenecks

  - by nextgenneo

  I have a VMWare ESxi box, 22GB ram, Dual Quad Core Xeon, 2 Sas drives + Write caching raid controller etc. Anyways, have about 30 small XP VM's running on it and starting to get some very slow boot times and other performance issues. I THINK its I/O but looking at the graphs not too sure what to look for. Any ideas on what to look for would be appreciated. Here is the data I've got so far: (I feel like my IO is high but not sure what to bench it against)

  Read the article

• Log - Server kernel: INFO: task httpd:000000 blocked for more than 120 seconds

  - by valter

  Almost everyday my server is crashing due to hight server load, and even restarting apache or mysql can't solve the problem. I need to reboot the server to solve, or it crash again due to the high load. The log system records something like this when it crashes: Aug 11 18:33:53 server kernel: INFO: task httpd:20008 blocked for more than 120 seconds. Aug 11 18:33:53 server kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 11 18:33:53 server kernel: httpd D ffffffff801538ac 0 20008 5816 20066 19809 (NOTLB) Aug 11 18:33:53 server kernel: ffff81025a299dc8 0000000000000082 ffff81033b4c0740 ffffffff80009a14 Aug 11 18:33:53 server kernel: ffff8101063f8d80 0000000000000009 ffff8100b758f7e0 ffff8101c57187e0 Aug 11 18:33:53 server kernel: 00009436d4100b6c 000000000001d50f ffff8100b758f9c8 000000083b531588 Aug 11 18:33:53 server kernel: Call Trace: Aug 11 18:33:53 server kernel: [<ffffffff80009a14>] __link_path_walk+0x173/0xfb9 Aug 11 18:33:53 server kernel: [<ffffffff8002cc16>] mntput_no_expire+0x19/0x89 Aug 11 18:33:53 server kernel: [<ffffffff80063c4f>] __mutex_lock_slowpath+0x60/0x9b Aug 11 18:33:53 server kernel: [<ffffffff80023908>] __path_lookup_intent_open+0x56/0x97 Aug 11 18:33:53 server kernel: [<ffffffff80063c99>] .text.lock.mutex+0xf/0x14 Aug 11 18:33:53 server kernel: [<ffffffff8001b21f>] open_namei+0xea/0x712 Aug 11 18:33:54 server kernel: [<ffffffff8002768a>] do_filp_open+0x1c/0x38 Aug 11 18:33:54 server kernel: Firewall: *UDP_IN Blocked* IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:30:48:9e:6e:99:08:00 SRC=208.43.135.158 DST=255.255.255.255 LEN=151 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=38354 DPT=6112 LEN=131 Aug 11 18:33:54 server kernel: [<ffffffff8001a061>] do_sys_open+0x44/0xbe Aug 11 18:33:54 server kernel: [<ffffffff8005d28d>] tracesys+0xd5/0xe0 I googled a lot trying to find a solution. But it looks that the solution is just to update the kernel or disk driver, thinks that I don't know how to do. In this url http://bugs.centos.org/view.php?id=4515 a lot o people report similar problems, except the fact that they are not related to httpd like mine. According to one member, one solution would be to add "elevator=noop " to /etc/grub.conf like in this example: title CentOS (2.6.18-238.12.1.el5xen) root (hd0,0) kernel /vmlinuz-2.6.18-238.12.1.el5xen ro root=/dev/VolGroup00/LogVol00 elevator=noop initrd /initrd-2.6.18-238.12.1.el5xen.img Would this really solve the problem? My disk are working in RAID. Can this cause some problem to my server? Is there any other solution?

  Read the article

• How do I write to a file and print to a terminal cuncurrently in Unix?

  - by bias

  I have a little bash function to log my Macports outputs to a file (since installs often spew little tidbits that are easy to lose in terminal noise), then I just cat the file to the terminal: function porti { command sudo port install $@ >> $1.log 2>&1; cat $1.log } Is there a way to do this concurrently? I don't care about it being in Bash, that's just how I started it. BTW I pass $@ to install but only $1 for the file name so that I can do something like: porti git-gore +bash_completion and only get the file git-core.log however someone else might prefer to include variants in the file name ...

  Read the article

• Unable to locate Windows Server Error log files

  - by Sam007

  I am getting an error in my application on 500 Internal Server Error. The firebug gives me, NetworkError: 500 Internal Server Error - http://webgis.arizona.edu/ArcGIS/rest/services/webGIS/Shock_Models/GPServer/Income_Log/jobs/jc09c501156564f71abc5d98393581267/results/final_shp?dpi=96&transparent=true&format=png8&imageSR=102100&f=image&bbox=%7B%22xmin%22%3A-14519891.438356264%2C%22ymin%22%3A637618.0139790997%2C%22xmax%22%3A-6692739.741956295%2C%22ymax%22%3A6507981.786279075%2C%22spatialReference%22%3A%7B%22wkid%22%3A102100%7D%7D&bboxSR=102100&size=800%2C600 And when I goto that particular link, I get this error, Server Error - Object reference not set to an instance of an object. Any idea how I can correct it? UPDATE I was told to use fiddler and see the error details that is occurring over the network and this is the output that I got, SESSION STATE: Done. Response Entity Size: 849 bytes. == FLAGS ================== BitFlags: [ClientPipeReused, ServerPipeReused] 0x18 X-CLIENTPORT: 2010 X-RESPONSEBODYTRANSFERLENGTH: 849 X-EGRESSPORT: 2023 X-HOSTIP: 128.196.53.161 X-PROCESSINFO: firefox:2248 X-CLIENTIP: 127.0.0.1 X-SERVERSOCKET: REUSE ServerPipe#2 == TIMING INFO ============ ClientConnected: 15:53:51.383 ClientBeginRequest: 15:53:51.494 GotRequestHeaders: 15:53:51.494 ClientDoneRequest: 15:53:51.494 Determine Gateway: 0ms DNS Lookup: 0ms TCP/IP Connect: 0ms HTTPS Handshake: 0ms ServerConnected: 15:52:45.077 FiddlerBeginRequest: 15:53:51.495 ServerGotRequest: 15:53:51.495 ServerBeginResponse: 15:53:51.679 GotResponseHeaders: 15:53:51.679 ServerDoneResponse: 15:53:51.679 ClientBeginResponse: 15:53:51.679 ClientDoneResponse: 15:53:51.679 Overall Elapsed: 00:00:00.1850106 The response was buffered before delivery to the client. == WININET CACHE INFO ============ This URL is not present in the WinINET cache. [Code: 2] * Note: Data above shows WinINET's current cache state, not the state at the time of the request. * Note: Data above shows WinINET's Medium Integrity (non-Protected Mode) cache only. But I am still confused as to what the error is? This is the application. I am not sure if the error is due to the ArcGIS-Server or the Windows Server 2008. I am new on working with the Windows Server and wanted to know where can I look for the error lof files? This is the link which gives the details and the log info of the job executed. This is the output.

  Read the article

• Inspection of Insert Statement When Using LINQ's SubmitChanges

  - by Code Sherpa

  Hi. I want to see what my insert statement would look like as if I was wiring up an text-based ADO.NET command. How do I do this? I have been following the below link: http://damieng.com/blog/2008/07/30/linq-to-sql-log-to-debug-window-file-memory-or-multiple-writers And have added the DebugTextWriter class to my project. So, now, in my code I have the following which doesn't really do anything and I don't think its right: using(WorkbookDataContext dc = _conn.GetContext()) { if(profile.ProfileId > 0) { dc.Profiles.Attach(profile, true); } else { dc.Profiles.InsertOnSubmit(profile); } dc.Log = new DebugTextWriter(); #if DEBUG dc.Log = new System.IO.StreamWriter("linq-to-sql.log") { AutoFlush = true }; #endif dc.SubmitChanges(); } Any ideas what I am doing wrong and/or how to inspect my LINQ insert statement correctly? Thanks

  Read the article

• C Remove the first line from a text file without rewriting file

  - by Tom Van den Bon

  Hi, I've got a service which runs all the time and also keeps a log file. It basically adds new lines to the log file every few seconds. I'm written a small file which reads these lines and then parses them to various actions. The question I have is how can I delete the lines which I have already parsed from the log file without disrupting the writing of the log file by the service? Usually when I need to delete a line in a file then I open the original one and a temporary one and then I just write all the lines to the temp file except the original which I want to delete. Obviously this method will not word here. So how do I go about deleting them ?

  Read the article

• Is the XP VMM a bottleneck on a multi core machine?

  - by JeffV

  I have a dual Xeon hex core machine running an IO intensive application. (WinXP 32) I am seeing a hardware driver (1/2 user mode, 1/2 kernel, streaming data) that is using 6k delta page faults per second. When other applications load or allocate large amounts of memory the driver's hardware buffer gets an underrun (application not feeding it fast enough). Could this be because the kernel is only using one core to service page fault interrupts?

  Read the article

• Google’s April Fools Day Prank– Google Maps For Nintendo Entertainment System(NES)

  - by Gopinath

  Google is a funny organization and they celebrate most of events we love, in a geeky way. On the occasion of April Fool’s day 2012, Google released 8 bit Google Maps for Nintendo Entertainment System(NES). Here is the screen grab of Buckingham Palace, on 8 bit Google Maps. For those who are not aware of NES,  it is XBox of 1980’s.  NES is considered one of the most influential video game systems ever produced. Released in 1983, NES conquered millions of gamers heart and had a long lasting impact of 20 years. In the year of 2003, Nintendo finally stopped production of NES. Check out the embedded Google’s launch video of 8 Bit Google Maps for NES If you interested to take a tour the 8 bit Google Maps, go to Google Maps and click on the quest button available on right top corner. The guys at techi.com has a good collection of screen grabs taken from 8 Bit Google Maps, check it out here.

  Read the article

• "Operation System not found" Dell XPS 15Z L511Z

  - by akikara

  Although title is the same problem is different. I've installed Ubuntu 14.04 Trusty on my HP EliteBook 6930p Notebook. And I was trying to create a bootable usb for my DELL XPS 15z. After successful creation of usb with usb-creator-gtk I plugged in bootable usb stick to DELL laptop. The error message was "Operation System not found". I tried several things but could not make it. When I check from working Ubuntu, I can see that usb is bootable and has files for installation.

  Read the article

• Yelp Like Adjective Rating System

  - by clifgray

  I am building a website that has users list their outdoor adventures (skydiving, surfing, base jumping, etc) and the other people can comment on them. I want to have a rating system like Yelp which has "Useful, Funny, or Cool" but with different adjectives. I have thought of a few such as Daring, Adventurous, and Unique but I wanted to get some feedback on what a few other good adjectives would be. Also does anyone have experience with other such systems or advice for better systems? Primarily I just want the user to have somewhat more descriptive voting options than u and down or 1 though 5.

  Read the article

• NTFS partitions hidden under EXT4 file system / partition...want to recover files from NTFS

  - by user7534

  I am new to ubuntu, but very impressed with the system. so one day i tried installing ubuntu 10.10 along with windows in dual boot first place it didnt get installed properly and during second attempt i could do it right but oh...i lost my windows 7 , here is my problem and what i have done till now. i have hdd installed with ubuntu same disk have windows partitions and i need to extract data from those ...very very important i tried to access the same from ubuntu ...can not access it, 3.reinstalled the windows 7 , hdd is not detected 4.during installation ubuntu gone , so reintalled scan in ubuntu says hdd is fine and DiskInternals linux reader actual show the NTFS partitions , recovery tool not able to get any data out. , please help i need data from these partitions...please I feel that i have put ext4 partition on ntfs filesystem...and now not able to access it

  Read the article

• IBM System x3650 M2: Benchmark of Oracle's JDE 9.0 with Oracle VM

  - by didier.wojciechowski

  The IBM Oracle International Competency Center (ICC) in Denver, Colorado in a joint effort with the Oracle JD Edwards performance team was the first to execute a certified JD Edwards EnterpriseOne benchmark running on the new Intel® Xeon® processor 5500 series (Nehalem). This benchmark configuration included the IBM System x3650 M2, partitioned using Oracle Virtual Machine (VM), and Oracle's robust "Day in the Life" (DIL) test kit. In October, 2009 the benchmark scaled to 700 users with early code. In January 2010, with GA level code, the benchmark scaled successfully to 1000 users with sub-second response time.

  Read the article

• NTFS partitions hidden under EXT4 file system / partion...want to recover files from NTFS

  - by user7534

  Hi all, I am new to ubuntu, but very impressed with the system. so one day i tried installing ubuntu 10.10 along with windows in dual boot first place it didnt get installed properly and during second attempt i could do it right but oh...i lost my windows 7 , here is my problem and what i have done till now. i have hdd installed with ubuntu same disk have windows partitions and i need to extract data from those ...very very important i tried to access the same from ubuntu ...can not access it, 3.reinstalled the windows 7 , hdd is not detected 4.during installation ubuntu gone , so reintalled scan in ubuntu says hdd is fine and DiskInternals linux reader actual show the NTFS partitions , recovery tool not able to get any data out. , please help i need data from these partitions...please I feel that i have put ext4 partition on ntfs filesystem...and now not able to access it

  Read the article

• Using Lazy<T> and abstract wrapper class to lazy-load complex system parameters

  - by DigiMortal

  .NET Framework 4.0 introduced new class called Lazy<T> and I wrote blog post about it: .Net Framework 4.0: Using System.Lazy<T>. One thing is annoying for me – we have to keep lazy loaded value and its value loader as separate things. In this posting I will introduce you my Lazy<T> wrapper for complex to get system parameters that uses template method to keep lazy value loader in parameter class. Problem with original implementation Here’s the sample code that shows you how Lazy<T> is usually used. This is just sample code, don’t focus on the fact that this is dummy console application. class Program {     static void Main(string[] args)     {         var temperature = new Lazy<int>(LoadMinimalTemperature);           Console.WriteLine("Minimal room temperature: " + temperature.Value);         Console.ReadLine();     }       protected static int LoadMinimalTemperature()     {         var returnValue = 0;           // Do complex stuff here           return true;     } } The problem is that our class with many lazy loaded properties will grow messy if it has all value loading code inside it. This code may be complex for more than one parameter and in this case it is better to use separate class for this parameter. Defining base class for parameters As a first step I will define base class for all lazy-loaded parameters. This class is wrapper around Lazy<T> and it also offers one template method that parameter classes have to override to provide loaded data. public abstract class LazyParameter<T> {     private Lazy<T> _lazyParam;       public LazyParameter()     {         _lazyParam = new Lazy<T>(Load);     }       protected abstract T Load();       public T Value     {         get { return _lazyParam.Value; }     } } It is also possible to extend Lazy<T> but I don’t prefer to do it as Lazy<T> has six constructors we have to take care of. Also I don’t like to expose Lazy<T> public interface to users of my parameter classes. Creating parameter class Now it’s time to create our first parameter class. Notice how few stuff we have in this class besides overridden Load() method. public class MinimalRoomTemperature : LazyParameter<int> {     protected override int Load()     {         var returnValue = 0;           // Do complex stuff here           return returnValue;     } } Using parameter class is simple. Here’s my test code. class Program {     static void Main(string[] args)     {         var parameter = new MinimalRoomTemperature();         Console.WriteLine("Minimal room temperature: " + parameter.Value);         Console.ReadLine();     } } Conclusion Lazy<T> is useful class that you usually don’t want to use outside from API-s. I like this class but I don’t like when people are using this class directly in application code. In this posting I showed you how to use Lazy<T> with wrapper class to get complex parameter loading code out from classes that use this parameter. We ended up with generic base class for parameters that you can also use as base for other similar classes (you have to find better name to base class in this case).

  Read the article

• Event system architecture for networking when performance is concerned

  - by Vandell

  How should I design a system for an action game (think in Golden Axe) where events can happen remotely? I'm using TCP for this because the client is in flash. There's so many options, I can make a binary protocol (I don't like this idea, I found it to be too hard to mantain) but I was also thinking that passing jsons through clients and server can be slow (Is that a exaggerated concern?). What about the internal architecture for the server? And for the client? I'm really lost, If it's a question that is too big, please indicate me some material so I can formulate a better question next time.

  Read the article

• SQL SERVER – A Quick Look at Logging and Ideas around Logging

  - by pinaldave

  This blog post is written in response to the T-SQL Tuesday post on Logging. When someone talks about logging, personally I get lots of ideas about it. I have seen logging as a very generic term. Let me ask you this question first before I continue writing about logging. What is the first thing comes to your mind when you hear word “Logging”? Now ask the same question to the guy standing next to you. I am pretty confident that you will get  a different answer from different people. I decided to do this activity and asked 5 SQL Server person the same question. Question: What is the first thing comes to your mind when you hear the word “Logging”? Strange enough I got a different answer every single time. Let me just list what answer I got from my friends. Let us go over them one by one. Output Clause The very first person replied output clause. Pretty interesting answer to start with. I see what exactly he was thinking. SQL Server 2005 has introduced a new OUTPUT clause. OUTPUT clause has access to inserted and deleted tables (virtual tables) just like triggers. OUTPUT clause can be used to return values to client clause. OUTPUT clause can be used with INSERT, UPDATE, or DELETE to identify the actual rows affected by these statements. Here are some references for Output Clause: OUTPUT Clause Example and Explanation with INSERT, UPDATE, DELETE Reasons for Using Output Clause – Quiz Tips from the SQL Joes 2 Pros Development Series – Output Clause in Simple Examples Error Logs I was expecting someone to mention Error logs when it is about logging. The error log is the most looked place when there is any error either with the application or there is an error with the operating system. I have kept the policy to check my server’s error log every day. The reason is simple – enough time in my career I have figured out that when I am looking at error logs I find something which I was not expecting. There are cases, when I noticed errors in the error log and I fixed them before end user notices it. Other common practices I always tell my DBA friends to do is that when any error happens they should find relevant entries in the error logs and document the same. It is quite possible that they will see the same error in the error log  and able to fix the error based on the knowledge base which they have created. There can be many different kinds of error log files exists in SQL Server as well – 1) SQL Server Error Logs 2) Windows Event Log 3) SQL Server Agent Log 4) SQL Server Profile Log 5) SQL Server Setup Log etc. Here are some references for Error Logs: Recycle Error Log – Create New Log file without Server Restart SQL Error Messages Change Data Capture I got surprised with this answer. I think more than the answer I was surprised by the person who had answered me this one. I always thought he was expert in HTML, JavaScript but I guess, one should never assume about others. Indeed one of the cool logging feature is Change Data Capture. Change Data Capture records INSERTs, UPDATEs, and DELETEs applied to SQL Server tables, and makes a record available of what changed, where, and when, in simple relational ‘change tables’ rather than in an esoteric chopped salad of XML. These change tables contain columns that reflect the column structure of the source table you have chosen to track, along with the metadata needed to understand the changes that have been made. Here are some references for Change Data Capture: Introduction to Change Data Capture (CDC) in SQL Server 2008 Tuning the Performance of Change Data Capture in SQL Server 2008 Download Script of Change Data Capture (CDC) CDC and TRUNCATE – Cannot truncate table because it is published for replication or enabled for Change Data Capture Dynamic Management View (DMV) I like this answer. If asked I would have not come up with DMV right away but in the spirit of the original question, I think DMV does log the data. DMV logs or stores or records the various data and activity on the SQL Server. Dynamic management views return server state information that can be used to monitor the health of a server instance, diagnose problems, and tune performance. One can get plethero of information from DMVs – High Availability Status, Query Executions Details, SQL Server Resources Status etc. Here are some references for Dynamic Management View (DMV): SQL SERVER – Denali – DMV Enhancement – sys.dm_exec_query_stats – New Columns DMV – sys.dm_os_windows_info – Information about Operating System DMV – sys.dm_os_wait_stats Explanation – Wait Type – Day 3 of 28 DMV sys.dm_exec_describe_first_result_set_for_object – Describes the First Result Metadata for the Module Transaction Log Impact Detection Using DMV – dm_tran_database_transactions Log Files I almost flipped with this final answer from my friend. This should be probably the first answer. Yes, indeed log file logs the SQL Server activities. One can write infinite things about log file. SQL Server uses log file with the extension .ldf to manage transactions and maintain database integrity. Log file ensures that valid data is written out to database and system is in a consistent state. Log files are extremely useful in case of the database failures as with the help of full backup file database can be brought in the desired state (point in time recovery is also possible). SQL Server database has three recovery models – 1) Simple, 2) Full and 3) Bulk Logged. Each of the model uses the .ldf file for performing various activities. It is very important to take the backup of the log files (along with full backup) as one never knows when backup of the log file come into the action and save the day! How to Stop Growing Log File Too Big Reduce the Virtual Log Files (VLFs) from LDF file Log File Growing for Model Database – model Database Log File Grew Too Big master Database Log File Grew Too Big SHRINKFILE and TRUNCATE Log File in SQL Server 2008 Can I just say I loved this month’s T-SQL Tuesday Question. It really provoked very interesting conversation around me. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Optimization, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Installing Ubuntu 12.04 on EFI system

  - by aniruddhabhide

  Fellas, need help. Trying to install Ubuntu 12.04 on laptop to dual boot alongside Win7. I have UEFI and GPT partitioning scheme. It has optional Legacy boot mode though. I can boot from Ubuntu USB/CD in both Legacy and UEFI modes. But when I reach partition selection step, it gives me error "ubi-partman failed with exit code 141". I searched forums for this but those who encountered this error said it was resolved when they detached one of two HDs in their system. But I have only one hard disk attached and I am sure Ubuntu's GRUB supports GPT. But looks like it is not able to read GPT partitions on my HD. Any help regarding this will be appreciated.

  Read the article

• OutOfMemoryException in Microsoft WSE 3.0 Diagnostics.TraceInputFilter

  - by Michael Freidgeim

  We are still using Microsoft WSE 3.0 and on test server started to get   Event Type:        Error Event Source:    Microsoft WSE 3.0 WSE054: An error occurred during the operation of the TraceInputFilter: System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.    at System.String.GetStringForStringBuilder(String value, Int32 startIndex, Int32 length, Int32 capacity)    at System.Text.StringBuilder.GetThreadSafeString(IntPtr& tid)    at System.Text.StringBuilder.set_Length(Int32 value)    at System.Xml.BufferBuilder.Clear()    at System.Xml.BufferBuilder.set_Length(Int32 value)    at System.Xml.XmlTextReaderImpl.ParseText()    at System.Xml.XmlTextReaderImpl.ParseElementContent()    at System.Xml.XmlTextReaderImpl.Read()    at System.Xml.XmlLoader.LoadNode(Boolean skipOverWhitespace)    at System.Xml.XmlLoader.LoadDocSequence(XmlDocument parentDoc)    at System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace)    at System.Xml.XmlDocument.Load(XmlReader reader)    at System.Xml.XmlDocument.Load(Stream inStream)    at Microsoft.Web.Services3.Diagnostics.TraceInputFilter.OpenLoadExistingFile(String path)    at Microsoft.Web.Services3.Diagnostics.TraceInputFilter.Load(String path)    at Microsoft.Web.Services3.Diagnostics.TraceInputFilter.TraceMessage(String messageId, Collection`1 traceEntries).   After investigation it was found, that the problem related to trace files, that become too big. When they were deleted and new files were created, error gone.

  Read the article

• Can a Guy with Embedded System Background go into Game Development

  - by NANDAGOPAL

  Well, I finished my Masters in Embedded Systems, and I am working in GUI development, and working with graphic tools and images and GUI's keep me glued to my seat more than working on code for MUP/MUC . And I want to give game development a Fair chance, try out developing a game from scratch using basic libraries then tryout the same in a free/open source game engine and there is a good chance I may fall in love with it, but it is poissible for a person with an Electrical and Electronics Bachelors and Embedded Systems Masters ( just a years experience in the field) go into game development and be successful in the profession. And I asked the same question @ stackoverflow.com (wrong place to ask ) http://stackoverflow.com/questions/13794822/can-a-guy-with-embedded-system-background-go-into-game-development/13794943#13794943 And I received good but a very generic answer. I would be happy to know the actual pro's and con's of a master's in embedded systems migrating to Game Dev

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >