Search Results

Search found 13518 results on 541 pages for 'graphical interface'.

Page 91/541 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• Cisco ASA 8.2 ACL For NAT

  - by javano

  Sadly I have gone back in time to ASA 8.2(5)33 which I am not so familiar with. I have configured NAT between two interfaces but traffic isn't passing becasue I can't get the ACL to work; (The full config which isn't very big is here but to keep this post tidy I have just pasted the important parts below); interface Ethernet0/0 switchport access vlan 108 ! interface Ethernet0/6 switchport access vlan 104 ! interface Ethernet0/7 switchport access vlan 105 ! interface Vlan104 description BUILDING2 nameif BUILDING2 security-level 0 ip address 10.104.0.1 255.255.255.0 ! interface Vlan105 description BUILDING1 nameif BUILDING1 security-level 0 ip address 10.105.0.1 255.255.255.0 ! interface Vlan108 description Main LAN VLAN nameif lan security-level 0 ip address 172.22.0.215 255.255.255.0 ! object-group network obj_net_Remote_Hosts network-object host 111.111.111.3 network-object host 111.111.111.65 object-group network obj_host_pc1_eth1 network-object host 10.104.0.111 object-group network obj_host_pc2_eth1 network-object host 10.104.0.112 object-group network obj_host_pc3_eth1 network-object host 10.104.0.106 object-group network obj_host_pc4_eth1 network-object host 10.104.0.107 object-group network obj_net_PCs description IPs of PCs group-object obj_host_pc1_eth1 group-object obj_host_pc2_eth1 group-object obj_host_pc3_eth1 group-object obj_host_pc4_eth1 access-list acl_NAT_pc1_91 extended permit tcp host 10.104.0.111 host 111.111.111.3 eq 8101 access-list acl_Permit_PCs extended permit tcp object-group obj_net_PCs object-group obj_net_Remote_Hosts eq 8101 ! global (BUILDING1) 11 111.111.222.91 netmask 255.255.255.255 nat (BUILDING2) 11 access-list acl_NAT_pc1_91 access-group acl_Permit_PCs in interface BUILDING2 route BUILDING1 111.111.111.3 255.255.255.255 10.105.0.2 1 route BUILDING1 111.111.111.65 255.255.255.255 10.105.0.2 1 When I try and connect from PC1 to ip 111.111.111.3 I see the following error logged on the ASA console; %ASA-2-106001: Inbound TCP connection denied from 10.104.0.111/38495 to 111.111.111.3/8101 flags SYN on interface blades What the duce!

  Read the article

• CAD like 3D geometry .NET library

  - by Naszta

  I am looking for a good 3D CAD like library. I need basic geometry shapes (cube, sphere, torus etc.) and the library should make the surface mesh - based on the shapes and some boolean operations. I have found many libraries on google (wrapped on C++), but most of them are not really comfortable, and/or do not support union/intersection. http://www.geometros.com/sgcore/index.htm - it has wrapped interface, http://www.opencsg.org/ - I haven't found wrapped interface, http://carve-csg.com/ - I haven't found wrapped interface, http://gts.sourceforge.net/ - I haven't found wrapped interface, http://www.ogre3d.org/ - I haven't found basic geometric shapes and boolean operators, http://brlcad.org/ - its interface is not clear for me, I haven't found wrapped interface, http://www.cgal.org/ - currently I try to make it work, I haven't found wrapped interface, http://www.k-3d.org/ - I haven't found wrapped interface, http://www.opencascade.org/ - I haven't found wrapped interface, http://ilnumerics.net/ - it does not support solid boolean operations, http://www.techsoft3d.com/ - seems to be really good one. Support both C++ and C#, http://www.devdept.com/products/eyeshot/ - one more C# library. It was not tested. Open source would be nice, but not necessary. Many thanks for help. P.S.: the previous topic Update: in C# we will use Eyeshot project.

  Read the article

• TCL How to read , extract and count the occurent in .txt file (Current Directory)

  - by Passion

  Hi Folks, I am beginner to scripting and vigorously learning TCL for the development of embedded system. I have to Search for the files with only .txt format in the current directory, count the number of cases of each different "Interface # nnnn" string in .txt file, where nnnn is a four or 32 digits max hexadecimal no and o/p of a table of Interface number against occurrence. I am facing implementation issues while writing a script i.e, Unable to implement the data structure like Linked List, Two Dimensional array. I am rewriting a script using multi dimension array (Pass values into the arrays in and out of procedure) in TCL to scan through the every .txt file and search for the the string/regular expression ‘Interface # ’ to count and display the number of occurrences. If someone could help me to complete this part will be much appreciated. Search for only .txt extension files and obtain the size of the file Here is my piece of code for searching a .txt file in present directory set files [glob *.txt] if { [llength $files] > 0 } { puts "Files:" foreach f [lsort $files] { puts " [file size $f] - $f" } } else { puts "(no files)" } I reckon these are all the possible logical steps behind to complete it i) Once searched and find the .txt file then open all .txt files in read only mode ii) Create a array or list using the procedure (proc) Interface number to NULL and Interface count to zero 0 iii) Scan thro the .txt file and search for the string or regular expression "interface # iv) When a match found in .txt file, check the Interface Number and increment the count for the corresponding entry. Else add new element to the Interface Number list v) If there are no files return to the first directory My o/p is like follows Interface Frequency 123f 3 1232 4

  Read the article

• slow SQL command

  - by Retrocoder

  I need to take some data from one table (and expand some XML on the way) and put it in another table. As the source table can have thousands or records which caused a timeout I decided to do it in batches of 100 records. The code is run on a schedule so doing it in batches works ok for the customer. If I have say 200 records in the source database the sproc runs very fast but if there are thousands it takes several minutes. I'm guessing that the "TOP 100" only takes the top 100 after it has gone through all the records. I need to change the whole code and sproc at some point as it doesn't scale but for now is there a quick fix to make this run quicker ? INSERT INTO [deviceManager].[TransactionLogStores] SELECT TOP 100 [EventId], [message].value('(/interface/mac)[1]', 'nvarchar(100)') AS mac, [message].value('(/interface/device) [1]', 'nvarchar(100)') AS device_type, [message].value('(/interface/id) [1]', 'nvarchar(100)') AS device_id, [message].value('substring(string((/interface/id)[1]), 1, 6)', 'nvarchar(100)') AS store_id, [message].value('(/interface/terminal/unit)[1]', 'nvarchar(100)') AS unit, [message].value('(/interface/terminal/trans/event)[1]', 'nvarchar(100)') AS event_id, [message].value('(/interface/terminal/trans/data)[1]', 'nvarchar(100)') AS event_data, [message].value('substring(string((/interface/terminal/trans/data)[1]), 9, 11)', 'nvarchar(100)') AS badge, [message].value('(/interface/terminal/trans/time)[1]', 'nvarchar(100)') AS terminal_time, MessageRecievedAt_UTC AS db_time FROM [deviceManager].[TransactionLog] WHERE EventId > @EventId --WHERE MessageRecievedAt_UTC > @StartTime AND MessageRecievedAt_UTC < @EndTime ORDER BY terminal_time DESC

  Read the article

• USB mouse does not work on boot

  - by Uku Loskit

  My problem is pretty much a duplicate of the one described in USB mouse late to load , but the solution there has not worked for me. I'm running the same OS and experiencing the exact same issue. It disappears after 10 seconds or so. Booting with the options specified in the other question did not fix it :/ Thanks in advance. sheepz@sheepz-desktop:~$ dmesg | egrep "hci|usb" [ 0.188000] usbcore: registered new interface driver usbfs [ 0.188000] usbcore: registered new interface driver hub [ 0.188000] usbcore: registered new device driver usb [ 0.358613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.358627] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.358637] uhci_hcd: USB Universal Host Controller Interface driver [ 0.358683] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.358691] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.358695] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.358726] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.358758] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100 [ 0.358927] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.358932] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.358935] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.358964] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 0.358991] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200 [ 0.359132] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.359137] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.359139] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.359165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 0.359193] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300 [ 0.359327] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.359332] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.359334] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.359360] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 0.359387] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 0.731933] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 1.023859] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 16.136175] usb 1-2: device descriptor read/64, error -110 [ 31.352481] usb 1-2: device descriptor read/64, error -110 [ 31.568485] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 46.680794] usb 1-2: device descriptor read/64, error -110 [ 61.903555] usb 1-2: device descriptor read/64, error -110 [ 62.119671] usb 1-2: new full speed USB device using uhci_hcd and address 5 [ 72.541078] usb 1-2: device not accepting address 5, error -110 [ 72.653194] usb 1-2: new full speed USB device using uhci_hcd and address 6 [ 83.066637] usb 1-2: device not accepting address 6, error -110 [ 83.178615] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 83.562546] usbcore: registered new interface driver hiddev [ 83.578827] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input3 [ 83.579016] generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0 [ 83.579244] usbcore: registered new interface driver usbhid [ 83.579246] usbhid: USB HID core driver [114025.224407] usb 3-1: USB disconnect, address 2 sheepz@sheepz-desktop:~$ dmesg | egrep "hci|usb" [ 0.188000] usbcore: registered new interface driver usbfs [ 0.188000] usbcore: registered new interface driver hub [ 0.188000] usbcore: registered new device driver usb [ 0.358613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.358627] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.358637] uhci_hcd: USB Universal Host Controller Interface driver [ 0.358683] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.358691] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.358695] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.358726] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.358758] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100 [ 0.358927] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.358932] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.358935] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.358964] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 0.358991] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200 [ 0.359132] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.359137] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.359139] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.359165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 0.359193] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300 [ 0.359327] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.359332] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.359334] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.359360] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 0.359387] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 0.731933] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 1.023859] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 16.136175] usb 1-2: device descriptor read/64, error -110 [ 31.352481] usb 1-2: device descriptor read/64, error -110 [ 31.568485] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 46.680794] usb 1-2: device descriptor read/64, error -110 [ 61.903555] usb 1-2: device descriptor read/64, error -110 [ 62.119671] usb 1-2: new full speed USB device using uhci_hcd and address 5 [ 72.541078] usb 1-2: device not accepting address 5, error -110 [ 72.653194] usb 1-2: new full speed USB device using uhci_hcd and address 6 [ 83.066637] usb 1-2: device not accepting address 6, error -110 [ 83.178615] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 83.562546] usbcore: registered new interface driver hiddev [ 83.578827] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input3 [ 83.579016] generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0 [ 83.579244] usbcore: registered new interface driver usbhid [ 83.579246] usbhid: USB HID core driver

  Read the article

• Music Notation Editor - Refactoring view creation logic elsewhere

  - by Cyril Silverman

  Let me preface by saying that knowing some elementary music theory and music notation may be helpful in grasping the problem at hand. I'm currently building a Music Notation and Tablature Editor (in Javascript). But I've come to a point where the core parts of the program are more or less there. All functionality I plan to add at this point will really build off the foundation that I've created. As a result, I want to refactor to really solidify my code. I'm using an API called VexFlow to render notation. Basically I pass the parts of the editor's state to VexFlow to build the graphical representation of the score. Here is a rough and stripped down UML diagram showing you the outline of my program: In essence, a Part has many Measures which has many Notes which has many NoteItems (yes, this is semantically weird, as a chord is represented as a Note with multiple NoteItems, individual pitches or fret positions). All of the relationships are bi-directional. There are a few problems with my design because my Measure class contains the majority of the entire application view logic. The class holds the data about all VexFlow objects (the graphical representation of the score). It contains the graphical Staff object and the graphical notes. (Shouldn't these be placed somewhere else in the program?) While VexFlowFactory deals with actual creation (and some processing) of most of the VexFlow objects, Measure still "directs" the creation of all the objects and what order they are supposed to be created in for both the VexFlowStaff and VexFlowNotes. I'm not looking for a specific answer as you'd need a much deeper understanding of my code. Just a general direction to go in. Here's a thought I had, create an MeasureView/NoteView/PartView classes that contains the basic VexFlow objects for each class in addition to any extraneous logic for it's creation? but where would these views be contained? Do I create a ScoreView that is a parallel graphical representation of everything? So that ScoreView.render() would cascade down PartView and call render for each PartView and casade down into each MeasureView, etc. Again, I just have no idea what direction to go in. The more I think about it, the more ways to go seem to pop into my head. I tried to be as concise and simplistic as possible while still getting my problem across. Please feel free to ask me any questions if anything is unclear. It's quite a struggle trying to dumb down a complicated problem to its core parts.

  Read the article

• Are there programming languages that allow you to do set arithmetic on types?

  - by Will Brown

  Out of curiosity, are there languages that allow you to do set arithmetic on types to create new types? Something like: interface A { void a(); void b(); } interface B { void b(); void c(); } interface C = A & B; // has b() interface D = A | B; // has a(), b() and c() interface E = (A & B) ^ B; // has c() I know that in some languages these ideas can be expressed (i.e., Java has List<Comparable & Serializable> for the union of the interfaces) but I've never heard of a language that supports type arithmetic. Thanks!

  Read the article

• VLC unable to open MRL

  - by faizal

  I am trying to play a VCD using : /usr/bin/vlc vcd:// But i get the error below : VLC media player 2.1.4 Rincewind (revision 2.1.4-0-g2a072be) [0x14ec1c8] main interface error: no suitable interface module [0x1486118] main libvlc error: interface "globalhotkeys,none" initialization failed [0x1486118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. [0x7f815c0009b8] main input error: open of `vcd://' failed [0x7f815c0009b8] main input error: Your input can't be opened [0x7f815c0009b8] main input error: VLC is unable to open the MRL 'vcd://'. Check the log for details. Any way to resolve this ?

  Read the article

• Music Notation Editor - Refactoring view creation logic elseware

  - by Cyril Silverman

  Let me preface by saying that knowing some elementary music theory and music notation may be helpful in grasping the problem at hand. I'm currently building a Music Notation and Tablature Editor (in Javascript). But I've come to a point where the core parts of the program are more or less there. All functionality I plan to add at this point will really build off the foundation that I've created. As a result, I want to refactor to really solidify my code. I'm using an API called VexFlow to render notation. Basically I pass the parts of the editor's state to VexFlow to build the graphical representation of the score. Here is a rough and stripped down UML diagram showing you the outline of my program: In essence, a Part has many Measures which has many Notes which has many NoteItems (yes, this is semantically weird, as a chord is represented as a Note with multiple NoteItems, individual pitches or fret positions). All of the relationships are bi-directional. There are a few problems with my design because my Measure class contains the majority of the entire application view logic. The class holds the data about all VexFlow objects (the graphical representation of the score). It contains the graphical Staff object and the graphical notes. (Shouldn't these be placed somewhere else in the program?) While VexFlowFactory deals with actual creation (and some processing) of most of the VexFlow objects, Measure still "directs" the creation of all the objects and what order they are supposed to be created in for both the VexFlowStaff and VexFlowNotes. I'm not looking for a specific answer as you'd need a much deeper understanding of my code. Just a general direction to go in. Here's a thought I had, create an MeasureView/NoteView/PartView classes that contains the basic VexFlow objects for each class in addition to any extraneous logic for it's creation? but where would these views be contained? Do I create a ScoreView that is a parallel graphical representation of everything? So that ScoreView.render() would cascade down PartView and call render for each PartView and casade down into each MeasureView, etc. Again, I just have no idea what direction to go in. The more I think about it, the more ways to go seem to pop into my head. I tried to be as concise and simplistic as possible while still getting my problem across. Please feel free to ask me any questions if anything is unclear. It's quite a struggle trying to dumb down a complicated problem to its core parts.

  Read the article

• Why does Java allow to implement different interfaces, each containing a method with the same signature?

  - by Software Engeneering Learner

  I've recently found that I can have two interfaces containing method with the same signature as a method in the other interface. And then I can have an interface or class that implements both of that interfaces. So the descendant class/interface has implicitly implements two different methods as a one method. Why is this allowed in Java? I can see a numerous problems that arises from that. Even eclipse only can find out about implementations for only one interface method, but for the second one it doesn't show any implementations at all. Also I believe there would be problems with automatic refactoring, like when you would like to change the signature of the method in one of the interfaces and IDE won't be able to correctly change that signature in all implementations, as they implement two different interfaces and how will IDE know what interface method it implementation descends. Why don't just make a compiler error like 'interfaces method names clashes' or something like that?

  Read the article

• i cant ping to my DMZ zone from the local inside PC

  - by Big Denzel

  HI everybody. Can anyone please help me on the following issue. I got a Cisco Asa 5520 configured at my network. I cant ping to my DMZ interface from a local inside network PC. so the only way a ping the DMZ is right from the Cisco ASA firewall, there i can pint to all 3 interfaces, Inside, Outside and DMZ,,,, But no PC from the Inside Network can access the DMZ. Can please any one help? I thank you all in advance Bellow is my Cisco ASA 5520 Firewall show run; ASA-FW# sh run : Saved : ASA Version 7.0(8) ! hostname ASA-FW enable password encrypted passwd encrypted names dns-guard ! interface GigabitEthernet0/0 description "Link-To-GW-Router" nameif outside security-level 0 ip address 41.223.156.109 255.255.255.248 ! interface GigabitEthernet0/1 description "Link-To-Local-LAN" nameif inside security-level 100 ip address 10.1.4.1 255.255.252.0 ! interface GigabitEthernet0/2 description "Link-To-DMZ" nameif dmz security-level 50 ip address 172.16.16.1 255.255.255.0 ! interface GigabitEthernet0/3 shutdown no nameif no security-level no ip address ! interface Management0/0 description "Local-Management-Interface" no nameif no security-level ip address 192.168.192.1 255.255.255.0 ! ftp mode passive access-list OUT-TO-DMZ extended permit tcp any host 41.223.156.107 eq smtp access-list OUT-TO-DMZ extended permit tcp any host 41.223.156.106 eq www access-list OUT-TO-DMZ extended permit icmp any any log access-list OUT-TO-DMZ extended deny ip any any access-list inside extended permit tcp any any eq pop3 access-list inside extended permit tcp any any eq smtp access-list inside extended permit tcp any any eq ssh access-list inside extended permit tcp any any eq telnet access-list inside extended permit tcp any any eq https access-list inside extended permit udp any any eq domain access-list inside extended permit tcp any any eq domain access-list inside extended permit tcp any any eq www access-list inside extended permit ip any any access-list inside extended permit icmp any any access-list dmz extended permit ip any any access-list dmz extended permit icmp any any access-list cap extended permit ip 10.1.4.0 255.255.252.0 172.16.16.0 255.255.25 5.0 access-list cap extended permit ip 172.16.16.0 255.255.255.0 10.1.4.0 255.255.25 2.0 no pager logging enable logging buffer-size 5000 logging monitor warnings logging trap warnings mtu outside 1500 mtu inside 1500 mtu dmz 1500 no failover asdm image disk0:/asdm-508.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (dmz,outside) tcp 41.223.156.106 www 172.16.16.80 www netmask 255.255.255 .255 static (dmz,outside) tcp 41.223.156.107 smtp 172.16.16.25 smtp netmask 255.255.2 55.255 static (inside,dmz) 10.1.0.0 10.1.16.0 netmask 255.255.252.0 access-group OUT-TO-DMZ in interface outside access-group inside in interface inside access-group dmz in interface dmz route outside 0.0.0.0 0.0.0.0 41.223.156.108 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute http server enable http 10.1.4.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh timeout 5 console timeout 0 management-access inside ! ! match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect dns maximum-length 512 inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! service-policy global_policy global Cryptochecksum: : end ASA-FW# Please Help. Big Denzel

  Read the article

• Netflix Rolls Out Polished New iPhone and Android Apps [Video]

  - by Jason Fitzpatrick

  If you’re a Netflix subscriber, you’ve got a brand spanking new mobile interface to take for a spin. Last week Netflix released a brand new iOS interface, this week it’s a brand new Android interface. The above video showcases the new iOS interface for mobile playback on devices like the iPhone and iPad. The slick new layout makes it even easier to browser new content and resume watching content you’ve paused at home or on the go. For a peek at the new (and similar) Android interface, check out the video below: For more information about the respective apps, visit their download pages to read up and grab a copy. Netflix for Android / iOS How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

  Read the article

• How do I enumerate a list of interfaces that are directly defined on an inheriting class/interface?

  - by Jordan

  Given the following C# class: public class Foo : IEnumerable<int> { // implementation of Foo and all its inherited interfaces } I want a method like the following that doesn't fail on the assertions: public void SomeMethod() { // This doesn't work Type[] interfaces = typeof(Foo).GetInterfaces(); Debug.Assert(interfaces != null); Debug.Assert(interfaces.Length == 1); Debug.Assert(interfaces[0] == typeof(IEnumerable<int>)); } Can someone help by fixing this method so the assertions don't fail? Calling typeof(Foo).GetInterfaces() doesn't work because it returns the entire interface hierarchy (i.e. interfaces variable contains IEnumerable<int> and IEnumerable), not just the top level.

  Read the article

• In which DLL is the COM interface iStream defined?

  - by Youval Bronicki

  I'm a complete newbie to Windows and COM programming, trying to use com4j in order to call a COM object from Java. Com4j generates Java interfaces from COM definitions "often found in .ocx, .dll, .exe, and/or .tlb files" . It was easy for me to locate the .ocx file of my target COM object, but I have no clue regarding the standard interface iStream. Microsoft's documentation mentions OLE32.DLL ( c:\Windows\Windows32\Ole32.dll ?) , but neither the com4j generator nor oleviewer succeed in opening this file. Any hints?

  Read the article

• Can I use a serial port as TCP/IP interface on Red Hat Linux?

  - by ShaChris23

  Background We want to run an FTP server on a Red Hat Enterprise OS. The problem is, the machine we have does not have an Ethernet port/interface (please don't ask why; it's just a project requirement). We only have a serial port. Question Is there COTS / open source software that I can use to make serial port "look" like a an Ethernet port? My project is commercial. We run Red Hat Enterprise Linux 5.3. Note: Pardon me if my post title is unclear. If you can think of a better title, please suggest or simply change the title.

  Read the article

• How can I create a web based administration interface.

  - by The HCD

  Hi all, I'm planning to create a simple web based interface that stores administration input in json format (for use later by an applicaiton running on the same host) example json output is here: http://www.json.org/example.html The content would be user contacts (email, name, phone number, photo etc..) There would need to be a conf file per logged in user. and an administrator user for viewing all config files in his group. I'm wondering what technology is best to create this framework. I could do it via servlets etc.. however, there may be something simpler.. Thanks to all for your replies in advance.

  Read the article

• No Carbon Human-Interface-Toolbox in OSX 64-bit binaries?

  - by yairchu

  I get the impression that Carbon Human Interface Toolbox does not work in 64-bit binaries. Apple's documentation says: The Carbon Help Manager is not available to 64-bit applications. ... The Control Manager is not available to 64-bit applications. ... The Data Browser is not available to 64-bit applications. ... I just want to verify that: There is no work-around around this. If this is simply the case. Why don't Apple's documentation simply state it as such?

  Read the article

• Want to build simple SQL admin interface to change a few values in a table.

  - by Adam McC

  i am currently building a system in MSSQL 2K5. i have a table that holds information about certain insurance schemes such as overheads and other things. these values will change occasionally and currently i administer the database straight through the management Studio. i would like to build a simple interface that will allow my colleagues to change these values by selecting the company in a dropdown and the current values will populate. they can then edit these values and submit them to the database. is this possible in the current Visual Studio supplied with MSSQL server 2K5 or do i need to get another product. i am confident that with the help of stack overflow and google i can build this myself, but i need pointed in the right direction as to which environment would be easiest and best to start building it. Many thanks, adam

  Read the article

• Python Desktop Application with the Browser as an interface?

  - by Eli

  I want to create an application that runs on the users computer, a stand-alone application, with installation and what-not, but I want the interface to be a browser, either internal and displayed as an OS window or external accessible using the browser (i.e. some http server). The reason would be because I know a little about Python, but I think I can manage as long as I have some basic roots that I can use and manipulate, and those would be HTML, CSS, and Javascript. I've yet to find a good GUI tool which I can use, and always abandon the idea after trying to mess around and eventually not getting anything.

  Read the article

• Virtual machine on ubuntu [closed]

  - by MITHIYA MOIZ

  I have configured virtual machine on ubuntu with the help of below article, https://help.ubuntu.com/9.04/serverguide/C/libvirt.html I managed to finish all the part except the major portion getting virtual host to talk to real network, Which I guess should be done only via bridge interface. Via virtual machine manager I try to choose any interface it gives me interface not bridged When I try to bridge the interceface eth0 as below auto br0 iface br0 inet static address 192.168.0.223 network 192.168.0.0 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off I cannot communicate with this interface to network, host server looses all the communication to network. But when I remote bridge interface from /etc/network/interfaces And configure eth0 as below it works fine The primary network interface auto eth0 iface eth0 inet static address 192.168.0.223 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 dns-nameservers 62.215.6.51 gateway 192.168.0.1 how can i setup bridge interface correctly and how would my /etc/netwrok/interfaces file would look a like.

  Read the article

• How do I make a class whose interface matches double, but upon which templates can be specialized?

  - by Neil G

  How do I make a class whose interface matches double, but whose templated types do not dynamic cast to double? The reason is that I have a run-time type system, and I want to be able to have a type that works just like double: template<int min_value, int max_value> class BoundedDouble: public double {}; And then inherit use template specialization to get run-time information about that type: template<typename T> class Type { etc. } template<int min_value, int max_value> class Type<BoundedDouble<min_value, max_value>> { int min() const { return min_value; } etc. } But, you can't inherit from double...

  Read the article

• iPhone interface design considerations: checkbox and drop-down menu ?

  - by Jesse Armand

  This may not be a programming question, but I don't know where to ask for this and it's still related. We all know that the checkbox and drop-down menu is a UI paradigm brought in from HTML or web interface. I'm not asking for code implementations here. A google search had produced many results. Although if anyone is willing to share that's great. So the question is: Is this a good design approach if we just want to provide a checkbox or drop-down functionality? (e.g. for quizzes, or forms)

  Read the article

• Why is my class method not visible when I implement an interface in my class?

  - by Phsika

  i can not see MyLoad.TreeLoader(.... but why i can not see? i implemented iloader to TreeViewLoad. i should see TreeLoader why? namespace Rekursive { public partial class Form1 : Form { public Form1() { InitializeComponent(); } private void Form1_Load(object sender, EventArgs e) { //treeView1.Nodes.Add("Test"); iloader MyLoad = new TreeViewLoad(); MyLoad.loader("test", treeView1, 1); // i can not see MyLoad.TreeLoader(.... but why i can not see? // i implemented iloader to TreeViewLoad. i should see TreeLoader why? //TreeViewLoad myloader = new TreeViewLoad(); } } interface iloader { void loader(string nodeName, TreeView myTre, int id); } class TreeViewLoad : iloader { public void TreeLoader(TreeView tre) { // i will call loader... } public void loader(string nodeName, TreeView myTre, int id) { myTre.Nodes.Add(nodeName + id.ToString()); if (id

  Read the article

• How do I put all types implementing a certain generic interface in a dictionary?

  - by James Wenday

  Given a particular interface ITarget<T> and a particular type myType, here's how you would determine T if myType implements ITarget<T>. (This code snippet is taken from the answer to an earlier question.) foreach (var i in myType.GetInterfaces ()) if (i.IsGenericType && i.GetGenericTypeDefinition() == typeof(ITarget<>)) return i.GetGenericArguments ()[0] ; However, this only checks a single type, myType. How would I create a dictionary of all such type parameters, where the key is T and the value is myType? I think it would look something like this: var searchTarget = typeof(ITarget<>); var dict = Assembly.GetExecutingAssembly().[???] .Where(t => t.IsGenericType && t.GetGenericTypeDefinition() == searchTarget) .[???]; What goes in the blanks?

  Read the article

• How to implement "drag n drop" user interface on website?

  - by Nikkeloodeni

  Hello, I was wondering what would be the best way to implement some kind of "drag n drop" user interface? What i mean is that there would be one main page and every link click (eg. other sections like about, gallery, contact form) would open a new drag n drop element on top of that main page. Something like windows desktop where you can move your application windows around the screen. Would it be best to call different functions with AJAX when a link is clicked? Like "gallery" link would call gallery-function and retrieve dynamically generated contents of that "window" with AJAX call and then just load that stuff on some div? Or would some other type of approach suit better for this? I hope I was able to explain this clearly enough. I'm looking for a proper "design pattern" to implement this. All suggestions are wellcome! :)

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >