Search Results

Search found 5564 results on 223 pages for 'rollover effect'.

Page 91/223 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• Why are USB 2.0 devices crashing my system?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic baby-ATX motherboard with no identifying markings. CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. There's one stamp on the motherboard that says "Rev.B". On board it has 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. It has an 80Gb Western Digital hard drive freshly formatted and built with Windows XP Professional with Service Pack 3 and all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 crashes the machine as soon as it starts up). It's got a Daytek MV150 15" touch screen running through the VGA and COM1 with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem If I hook any USB 2.0 devices to this machine, it hangs the whole machine and I have to hard boot it to get it back up. Workarounds found I can plug the same devices into the on board USB 1.0 connectors and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions I've tried disabling all the on board devices that I'm not using - such as the on board LAN, the second COM port, the AGP connector etc. through the BIOS in an (perhaps misguided or futile) attempt to reduce the power consumption... I don't think it had any effect but it didn't do any harm. I was wondering if the PSU wattage just isn't enough to drive the USB 2.0 devices; I've seen this suggested but haven't found any confirmation that this could really be an issue - nor have I found a way to work around this issue - if indeed it is one. Any ideas? The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference. I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself. Other thoughts Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

  Read the article

• Parallel processing slower than sequential?

  - by zebediah49

  EDIT: For anyone who stumbles upon this in the future: Imagemagick uses a MP library. It's faster to use available cores if they're around, but if you have parallel jobs, it's unhelpful. Do one of the following: do your jobs serially (with Imagemagick in parallel mode) set MAGICK_THREAD_LIMIT=1 for your invocation of the imagemagick binary in question. By making Imagemagick use only one thread, it slows down by 20-30% in my test cases, but meant I could run one job per core without issues, for a significant net increase in performance. Original question: While converting some images using ImageMagick, I noticed a somewhat strange effect. Using xargs was significantly slower than a standard for loop. Since xargs limited to a single process should act like a for loop, I tested that, and found it to be about the same. Thus, we have this demonstration. Quad core (AMD Athalon X4, 2.6GHz) Working entirely on a tempfs (16g ram total; no swap) No other major loads Results: /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 0m3.784s user 0m2.240s sys 0m0.230s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 0m9.097s user 0m28.020s sys 0m0.910s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 0m9.844s user 0m33.200s sys 0m1.270s Can anyone think of a reason why running two instances of this program takes more than twice as long in real time, and more than ten times as long in processor time to complete the same task? After that initial hit, more processes do not seem to have as significant of an effect. I thought it might have to do with disk seeking, so I did that test entirely in ram. Could it have something to do with how Convert works, and having more than one copy at once means it cannot use processor cache as efficiently or something? EDIT: When done with 1000x 769KB files, performance is as expected. Interesting. /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.679s user 5m6.980s sys 0m6.340s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.152s user 5m6.140s sys 0m6.530s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 2m7.578s user 5m35.410s sys 0m6.050s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 4 convert -auto-level real 1m36.959s user 5m48.900s sys 0m6.350s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 1m36.392s user 5m54.840s sys 0m5.650s

  Read the article

• USB connection is unstable with Nexus S 2.3.4 on AMD 64 running 64-bit Windows 7, but works with 32-bit Windows Vista

  - by Mike

  The USB connection is unstable with Nexus S (Android 2.3.4) on AMD 64 running 64-bit Windows 7, but it works with 32-bit Windows Vista. Problem Description: On the 64-bit Windows 7 machine my Nexus S appears to connect, but then it disconnects moments later. Neither accessing USB storage or loading an Android application package file (APK) using the Android Debug Bridge (ADB) work. On 32-bit Windows Vista using the same USB cable, USB storage works. I haven't tried the ADB on 32-bit Windows Vista. Reproduction steps for USB storage: (I have provided the reproduction steps for USB storage and not ADB, because if one isn't working, then the other isn't working either and the USB storage reproduction steps are shorter to document.) Connect the USB cable to the Nexus S and my Windows 7 machine. Effect: The "USB Mass Storage, USB Connected" dialog appears with the button "Turn on USB storage." Click "Turn on USB Storage" Effect: The "working circle" appears. A dialog briefly appears saying "USB storage in use," then it either returns me to Step 1 (now that I am running 2.3.4) or is replaced with the Nexus S's application homepage (while I was running 2.3.3). I'm not sure if the version matters, but I mention it for completeness. On the 32-bit Windows Vista machine the connection is stable. I am able to navigate through the Nexus S file system create, read, update, and delete files, etc. I haven't tried connecting with the ADB. Troubleshooting summary: Tried and failed: Uninstalling and reinstalling the Android USB drivers including removing the files. Uninstalling my custom software Pulling the Nexus S's battery Restarting the Nexus S Restarting 64-bit Windows 7 Changing USB ports on the 64-bit Windows 7 box Compared the dates and file size on the DLLs in my google-usb_driver\amd64 directory and the windows\System32 directory. They match. The sizes for the google-usb_driver\i386 directory do not match (expected). Turning off Debugging mode on the Nexus S does not resolve the problem. Searching Google. Tried and succeeded: Connecting to another machine (Windows Vista) using the same USB cable and Nexus S phone. Troubleshooting observations: I notice that uninstalling the device drivers and deleting the files, then reinstalling the drivers, then rebooting 64-bit Windows 7 then unplugging the Nexus S, then plugging it back in occasionally helps for a short amount of time (minutes to hours, not days). When it is working, I can both access the Nexus S's drive and load/test applications using the ADB. I have observed some wonky behavior in the Device Manager that I haven't tracked down. Sometimes the black Nexus S image appears in the list of devices. Sometimes the image displays as a computer with a green ISA card. Sometimes it neither appears on the top level of devices nor under “other devices,” but it does appear under "disk drives" as "Android UMS Composite USB Device." System configuration: The Nexus S is running Android OS 2.3.4's "Settings\about phone\System updates" indicates that it is up to date as of May 21st 2011. Both 32-bit Windows Vista and 64-bit Windows 7 are up to date. The Windows Vista system is running on an Intel 32-bit processor. Windows 7 is running on an AMD 64-bit processor. I have done Android development on both systems, but I usually develop on the 64-bit Windows 7 machine.

  Read the article

• Adobe Photoshop Vs Lightroom Vs Aperture

  - by Aditi

  Adobe Photoshop is the standard choice for photographers, graphic artists and Web designers. Adobe Photoshop Lightroom  & Apple’s Aperture are also in the same league but the usage is vastly different. Although Photoshop is most popular & widely used by photographers, but in many ways it’s less relevant to photographers than ever before. As Lightroom & Aperture is aimed squarely at photographers for photo-processing. With this write up we are going to help you choose what is right for you and why. Adobe Photoshop Adobe Photoshop is the most liked tool for the detailed photo editing & designing work. Photoshop provides great features for rollover and Image slicing. Adobe Photoshop includes comprehensive optimization features for producing the highest quality Web graphics with the smallest possible file sizes. You can also create startling animations with it. Designers & Editors know how important precise masking is, PhotoShop lets you do that with various detailing tools. Art history brush, contact sheets, and history palette are some of the smart features, which add to its viability. Download Whether you’re producing printed pages or moving images, you can work more efficiently and produce better results because of its smooth integration across other adobe applications. Buy supporting layer effects, it allows you to quickly add drop shadows, inner and outer glows, bevels, and embossing to layers. It also provides Seamless Web Graphics Workflow. Photoshop is hands-down the BEST for editing. Photoshop Cons: • Slower, less precise editing features in Bridge • Processing lots of images requires actions and can be slower than exporting images from Lightroom • Much slower with editing and processing a large number of images Aperture Apple Aperture is aimed at the professional photographer who shoots predominantly raw files. It helps them to manage their workflow and perform their initial Raw conversion in a better way. Aperture provides adjustment tools such as Histogram to modify color and white balance, but most of the editing of photos is left for Photoshop. It gives users the option of seeing their photographs laid out like slides or negatives on a light table. It boasts of – stars, color-coding and easy techniques for filtering and picking images. Aperture has moved forward few steps than Photoshop, but most of the editing work has been left for Photoshop as it features seamless Photoshop integration. Aperture Pros: Aperture is a step up from the iPhoto software that comes with every Mac, and fairly easy to learn. Adjustments are made in a logical order from top to bottom of the menu. You can store the images in a library or any folder you choose. Aperture also works really well with direct Canon files. It is just $79 if you buy it through Apple’s App Store Moving forward, it will run on the iPad, and possibly the iPhone – Adobe products like Lightroom and Photoshop may never offer these options It is much nicer and simpler user interface. Lightroom Lightroom does a smashing job of basic fixing and editing. It is more advanced tool for photographers. They can use it to have a startling photography effect. Light room has many advanced features, which makes it one of the best tools for photographers and far ahead of the other two. They are Nondestructive editing. Nothing is actually changed in an image until the photo is exported. Better controls over organizing your photos. Lightroom helps to gather a group of photos to use in a slideshow. Lightroom has larger Compare and Survey views of images. Quickly customizable interface. Simple keystrokes allow you to perform different All Lightroom controls are kept available in panels right next to the photos. Always-available History palette, it doesn’t go when you close lightroom. You gain more colors to work with compared to Photoshop and with more precise control. Local control, or adjusting small parts of a photo without affecting anything else, has long been an important part of photography. In Lightroom 2, you can darken, lighten, and affect color and change sharpness and other aspects of specific areas in the photo simply by brushing your cursor across the areas. Photoshop has far more power in its Cloning and Healing Brush tools than Lightroom, but Lightroom offers simple cloning and healing that’s nondestructive. Lightroom supports the RAW formats of more cameras than Aperture. Lightroom provides the option of storing images outside the application in the file system. It costs less than photoshop. Download Why PhotoShop is advanced than Lightroom? There are countless image processing plug-ins on the market for doing specialized processing in Photoshop. For example, if your image needs sophisticated noise reduction, you can use the Noiseware plug-in with Photoshop to do a much better job or noise removal than Lightroom can do. Lightroom’s advantages over Aperture 3 Will always have better integration with Photoshop. Lightroom is backed by bigger and more active user community (So abundant availability for tutorials, etc.) Better noise reduction tool. Especially for photographers the Lens-distortion correction tool  is perfect Lightroom Cons: • Have to Import images to work on them • Slows down with over 10,000 images in the catalog • For processing just one or two images this is a slower workflow Photoshop Pros: • ACR has the same RAW processing controls as Lightroom • ACR Histogram is specialized to the chosen color space (Lightroom is locked into ProPhoto RGB color space with an sRGB tone curve) • Don’t have to Import images to open in Bridge or ACR • Ability to customize processing of RAW images with Photoshop Actions Pricing and Availability Get LightRoomGet PhotoShop Latest version Of Photoshop can be purchased from Adobe store and Adobe authorized reseller and it costs US$999. Latest version of Aperture can be bought for US$199 from Apple Online store or Mac App Store. You can buy latest version of LightRoom from Adobe Store or Adobe Authorized reseller for US$299. Related posts:Adobe Photoshop CS5 vs Photoshop CS5 extended Web based Alternatives to Photoshop 10 Free Alternatives for Adobe Photoshop Software

  Read the article

• float right image pushes down text in table below in IE9 [migrated]

  - by Cheers and hth. - Alf

  I'm not a webmaster, not even a web developer, but I'm tasked with adding content to a Wordpress site developed by Someone Else(TM). Here's a page illustrating the problem: http://www.reginedagan.no/program/fiskekonkurranse-i-hovden/. It shows up nice in Firefox: But in IE9 the floated picture pushed down the text in the table below, so that it looks rather awful: I found some related questions on the web, e.g. "CSS: Float right in IE doesn't work!" and "why does a floating DIV mess up table positioning?", and the suggestions there led me to set clear: none on the div around the table, the table itself, and then each individual tr and finally even on each individual td. I also set width="99%" on the table, and tried (but I don't know how correctly) to apply the IE6 quirk fix margin-right: -3px. So here's the content as written in Wordpress, including the unsuccessful attempted fixes: <h1><div style="float: right"><a href="http://www.reginedagan.no/?attachment_id=671"><img src="http://www.reginedagan.no/wp-content/uploads/2012/06/fiskekonkurranse-2011-bilde-3-nedskalert.jpg" alt="Fra fiskekonkurransen i 2011" title="Fra fiskekonkurransen i 2011" width="200" height="242" class="size-full wp-image-671"/></a></div>Fiskekonkurranse i Hovden!</h1> <div style="background-color: #FAF0F0; clear: none;"><table width="99%" style="clear: none; right-margin: -3px;"> <tr style=" clear: none;"> <td style="text-align: left; clear: none;">Dato:</td> <td style="text-align: left; clear: none;">Lørdag 21.juli</td> </tr> <tr style=" clear: none;"> <td style="text-align: left; padding-left: 2em"; clear: none;>/ barn, Flytebrygga</td> <td style="text-align: left; clear: none;">15.00 &ndash; 16.00</td> </tr> <tr style=" clear: none;"> <td style="text-align: left; padding-left: 2em; clear: none;">/ voksne (over 12 år), Moloen</td> <td style="text-align: left; clear: none;">15.00 &ndash; 17.00 </td> </tr> <tr style=" clear: none;"> <td style="text-align: left; clear: none;">Sted:</td> <td style="text-align: left; clear: none;">Hovden</td> </tr> <tr style=" clear: none;"> <td style="text-align: left; clear: none;">Pris:</td> <td style="text-align: left; clear: none;">voksen (over 12 år) kr. 50,-, barn kr. 30,-</td> </tr style=" clear: none;"> <tr> <td style="text-align: left; clear: none;">Arrangør:</td> <td style="text-align: left; clear: none;">Hovden Grendelag</td> </tr> </table></div> Velkommen til den årlige Fiskekonkurransen i Hovden lørdag 21. juli! <a href="http://www.reginedagan.no/program/fiskekonkurranse-i-hovden/fiskekonkurranse-2011-bilde-nedskalertjpg/" rel="attachment wp-att-672"><img src="http://www.reginedagan.no/wp-content/uploads/2012/03/fiskekonkurranse-2011-bilde-nedskalertjpg.jpg" alt="Fra fiskekonkurransen i 2011" title="Fra fiskekonkurransen i 2011" width="400" height="267" class="alignleft size-full wp-image-672" /></a>Det blir stangfiske fra moloen og egen barnekonkurranse fra flytebrygga. Premiering for størst fisk, størst antall kg og flest antall stk. Premiering for barn kl. 16:30 på moloen. Alle premieres. Premiering for voksne på festen om kvelden. Salg av pølser og brus, vafler og kaffe, samt sluker. <div style="clear: left; border: 1px dashed gray; padding: 1em;"> Fest på Hovden samfunnshus kl. 21 &ndash; 02. Musikk: «Mister West», Steinar Aarsnes, Andøya. CC. Salg av øl/vin og snacks. </div> VEL MØTT &mdash; SKITT FISKE! And the resulting HTML served to a browser (only the relevant first part): <div style="float: right;"><a href="http://www.reginedagan.no/?attachment_id=671"><img src="http://www.reginedagan.no/wp-content/uploads/2012/06/fiskekonkurranse-2011-bilde-3-nedskalert.jpg" alt="Fra fiskekonkurransen i 2011" title="Fra fiskekonkurransen i 2011" class="size-full wp-image-671" height="242" width="200"></a></div> <p>Fiskekonkurranse i Hovden!</p></h1> <div style="background-color: rgb(250, 240, 240); clear: none;"> <table style="clear: none;" width="99%"> <tbody><tr style="clear: none;"> <td style="text-align: left; clear: none;">Dato:</td> <td style="text-align: left; clear: none;">Lørdag 21.juli</td> </tr> The able to reproduce the effect with simpler code by setting clear: right on the table. However, I'm unable to reproduce the effect with default styling or with clear: none (as above). So it seems maybe it's something Wordpress does, or maybe it's something the theme thing or whatever it is does – but it's very similar to what others have observed, so there is strong indication that it's also a quirk in IE. Help?

  Read the article

• CodePlex Daily Summary for Sunday, May 30, 2010

  CodePlex Daily Summary for Sunday, May 30, 2010New ProjectsAviva Solutions C# Coding Guidelines: A set of C# coding guidelines, coding standards, layout rules, FxCop rulesets and (upcoming) custom FxCop and StyleCop rules for improving the over...BKWork: private project.classbook: du an trong vong 10 ngay. Nhom (Do Bao Linh, Phan Thanh Tai, Nguyen Dang Loc)Du an - 01: Du an mon thay LuongEndNote助手: EndNote Helper is a assistant tool for EndNote, which make your task of reference management more convinent. EndNote 助手是一个用于辅助EndNote进行文献管理的小工具，它可...Evoucher: Simple Evoucher Sales SystemFiddler Delayed Responses Extension: A fiddler extension that help developers delay the delivery of HTML Responses to applications. Some delay user stories: - Delivery of css to HTML ...Generic Entity Model 2: GEM2 is lightweight entity framework for building custom business solutions. It enables rapid approach to entity logic design, while offering out o...GY06: 这个是长大工院于2009年发起的项目，因为种种原因没有完成。JoshDOS: JoshDOS is a command line operating system kernel based off COSMOS. It can be booted from actual hardware and built in Visual Studio using .NET la...PhysicsFMUDeluxe.NET: Este projeto é desenvolvido com o intuíto de treinar o desenvolvimento de aplicações em C#. Ele contém ferramentas para cálculos de física e matemá...Reactor Services Platform: Reactor is a service composition and deployment grid that streamlines developing, composing, deploying and managing services. Reactor Services are ...SerafinApartment: Simple MVC 2 application for apartment rental. It is multingual booking system, that allows users to register, book and subscribe for notifications...Silverlight Audio Effect Box: This is a C# Silverlight 4 sample application which process audio sample in near real time. It allows to capture the default audio input device and...Smart Voice: Smart Voice let's you control Skype using your voice. It allows you to write messages, issue phone calls, etc. This application was developed think...WebDotNet - The minimalist web framework inspired by web.py: WebDotNet is an experiment in web frameworks. Inspired by the python web framework, web.py, it is an exercise in extreme minimalism in a framework...New ReleasesAcies: Acies - Alpha Build 0.0.7: Alpha release. Requires Microsoft XNA Framework Redistributable 3.1 (http://www.microsoft.com/downloads/details.aspx?FamilyID=53867a2a-e249-4560-...AdventureWorksLT 2008 Sample Database Script: AdventureWorksLT 2008 R2 DB Script: This script is based on latest download from the Sample database for SQL Server 2008 R2. The original download from the sample is approx 84 MB and ...ASP.NET Wiki Control: Release 1.3.1: - Removed ASP.NET Session dependency. BreadCrumbs will now work with sessions disabled. Can now also share a URL and have the breadcrumb appropriat...Aviva Solutions C# Coding Guidelines: Visual Studio 2010 Rule Sets: Rule Sets targetting different styles of projects.bvcms - Bellevue Church Management System: Source: This source was used to build the latest {church}.bvcms.comCC.Yacht: CC.Yacht 1.0.10.529: This is the initial release of CC.Yacht. Marked as beta since I don't have any testing/feedback beyond that of myself and my wife.Community Forums NNTP bridge: Community Forums NNTP Bridge V14: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has add...Community Forums NNTP bridge: Community Forums NNTP Bridge V15: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has add...Coronasoft Cryostasis scripting engine: CCSE v0.0.1.0 BETA: This is the 0.0.1.0 Beta Release. If you find any bugs Post them as a comment or in the Discussions tabEndNote助手: EndNote助手2.1.0..0: 去除了注册验证机制。Fiddler Delayed Responses Extension: v0.1: Version 0.1 of Fiddler Delayed Responses Extension. See ChangeLog for more information.Generic Entity Model 2: GEM2 build 52510: This is first BETA release of GEM2! Following implementation is still missing from initial plan: Detailed documentation MySQL operational databa...JoshDOS: JoshDOS Souce: This is the souce for the JoshDOS 1.0 OS kernel. You need the COSMOS user kit to use.JoshDOS: Shell Version 1.0: Whats in this download *JoshDOS user kit *JoshDOS VStudio starter kit *JoshDOS documentation Note: You will need the COSMOS user kit to start deve...miniTodo: mini Todo version 0.3: Todo完了時に音が出なかったのを修正Model Virtual Casting - ASPItalia.com: Model Virtual Casting 0.2: Model Virtual Casting 0.2Questa seconda release di ModelVC è corrispondente a quella mostrata in occasione della Real Code Conference 4.0 tenutasi ...PhysicsFMUDeluxe.NET: PhysicsFMUDeluxe.NET - Setup: Primeira versão pública do PhysicsFMUDeluxe.NETSilverlight Audio Effect Box: Echo Box 1.0: First realease - zip contains : web page + xap file :Smart Voice: Smart Voice 0.1: Here is the first alpha release of Smart Voice. Please remember this was done for a curricular unit project at my university and i understand that ...StyleCop Contrib: Custom rules v0.2: This release of the custom rules target StyleCop 4.3.3. Included rules are: Spacing Rules - NoTrailingWhiteSpace - IndentUsingTabs Ordering Rules ...System.ComponentModel.DataAnnotations Contrib: 0.2.46280.0: Built with Visual Studio 2010/.Net 4.0. Compiled from source code changeset 46280.VB Styler: VB Styler Suite V 1.3.0.0: This is the newest version of the VB Styler. Here are the new features. New Imaging ColorPicker A template for getting colors via sliders ColorR...VCC: Latest build, v2.1.30529.0: Automatic drop of latest buildWPF Application Framework (WAF): WPF Application Framework (WAF) 1.0.0.90 RC: Version: 1.0.0.90 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. ...XNA Collision Detection: XNA Collision Detection Sample Program: I have coded a compact program which shows the collision detection working, and provides a camera class for rendering and moving the "player." Agai...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active ProjectsAStar.netpatterns & practices – Enterprise LibraryCommunity Forums NNTP bridgeBlogEngine.NETGMap.NET - Great Maps for Windows Forms & PresentationIonics Isapi Rewrite FilterRawrCustomer Portal Accelerator for Microsoft Dynamics CRMFacebook Developer ToolkitPAP

  Read the article

• How can a code editor effectively hint at code nesting level - without using indentation?

  - by pgfearo

  I've written an XML text editor that provides 2 view options for the same XML text, one indented (virtually), the other left-justified. The motivation for the left-justified view is to help users 'see' the whitespace characters they're using for indentation of plain-text or XPath code without interference from indentation that is an automated side-effect of the XML context. I want to provide visual clues (in the non-editable part of the editor) for the left-justified mode that will help the user, but without getting too elaborate. I tried just using connecting lines, but that seemed too busy. The best I've come up with so far is shown in a mocked up screenshot of the editor below, but I'm seeking better/simpler alternatives (that don't require too much code). [Edit] Taking the heatmap idea (from: @jimp) I get this and 3 alternatives - labelled a, b and c: The following section describes the accepted answer as a proposal, bringing together ideas from a number of other answers and comments. As this question is now community wiki, please feel free to update this. NestView The name for this idea which provides a visual method to improve the readability of nested code without using indentation. Contour Lines The name for the differently shaded lines within the NestView The image above shows the NestView used to help visualise an XML snippet. Though XML is used for this illustration, any other code syntax that uses nesting could have been used for this illustration. An Overview: The contour lines are shaded (as in a heatmap) to convey nesting level The contour lines are angled to show when a nesting level is being either opened or closed. A contour line links the start of a nesting level to the corresponding end. The combined width of contour lines give a visual impression of nesting level, in addition to the heatmap. The width of the NestView may be manually resizable, but should not change as the code changes. Contour lines can either be compressed or truncated to keep acheive this. Blank lines are sometimes used code to break up text into more digestable chunks. Such lines could trigger special behaviour in the NestView. For example the heatmap could be reset or a background color contour line used, or both. One or more contour lines associated with the currently selected code can be highlighted. The contour line associated with the selected code level would be emphasized the most, but other contour lines could also 'light up' in addition to help highlight the containing nested group Different behaviors (such as code folding or code selection) can be associated with clicking/double-clicking on a Contour Line. Different parts of a contour line (leading, middle or trailing edge) may have different dynamic behaviors associated. Tooltips can be shown on a mouse hover event over a contour line The NestView is updated continously as the code is edited. Where nesting is not well-balanced assumptions can be made where the nesting level should end, but the associated temporary contour lines must be highlighted in some way as a warning. Drag and drop behaviors of Contour Lines can be supported. Behaviour may vary according to the part of the contour line being dragged. Features commonly found in the left margin such as line numbering and colour highlighting for errors and change state could overlay the NestView. Additional Functionality The proposal addresses a range of additional issues - many are outside the scope of the original question, but a useful side-effect. Visually linking the start and end of a nested region The contour lines connect the start and end of each nested level Highlighting the context of the currently selected line As code is selected, the associated nest-level in the NestView can be highlighted Differentiating between code regions at the same nesting level In the case of XML different hues could be used for different namespaces. Programming languages (such as c#) support named regions that could be used in a similar way. Dividing areas within a nesting area into different visual blocks Extra lines are often inserted into code to aid readability. Such empty lines could be used to reset the saturation level of the NestView's contour lines. Multi-Column Code View Code without indentation makes the use of a multi-column view more effective because word-wrap or horizontal scrolling is less likely to be required. In this view, once code has reach the bottom of one column, it flows into the next one: Usage beyond merely providing a visual aid As proposed in the overview, the NestView could provide a range of editing and selection features which would be broadly in line with what is expected from a TreeView control. The key difference is that a typical TreeView node has 2 parts: an expander and the node icon. A NestView contour line can have as many as 3 parts: an opener (sloping), a connector (vertical) and a close (sloping). On Indentation The NestView presented alongside non-indented code complements, but is unlikely to replace, the conventional indented code view. It's likely that any solutions adopting a NestView, will provide a method to switch seamlessly between indented and non-indented code views without affecting any of the code text itself - including whitespace characters. One technique for the indented view would be 'Virtual Formatting' - where a dynamic left-margin is used in lieu of tab or space characters. The same nesting-level data used to dynamically render the NestView could also used for the more conventional-looking indented view. Printing Indentation will be important for the readability of printed code. Here, the absence of tab/space characters and a dynamic left-margin means that the text can wrap at the right-margin and still maintain the integrity of the indented view. Line numbers can be used as visual markers that indicate where code is word-wrapped and also the exact position of indentation: Screen Real-Estate: Flat Vs Indented Addressing the question of whether the NestView uses up valuable screen real-estate: Contour lines work well with a width the same as the code editor's character width. A NestView width of 12 character widths can therefore accommodate 12 levels of nesting before contour lines are truncated/compressed. If an indented view uses 3 character-widths for each nesting level then space is saved until nesting reaches 4 levels of nesting, after this nesting level the flat view has a space-saving advantage that increases with each nesting level. Note: A minimum indentation of 4 character widths is often recommended for code, however XML often manages with less. Also, Virtual Formatting permits less indentation to be used because there's no risk of alignment issues A comparison of the 2 views is shown below: Based on the above, its probably fair to conclude that view style choice will be based on factors other than screen real-estate. The one exception is where screen space is at a premium, for example on a Netbook/Tablet or when multiple code windows are open. In these cases, the resizable NestView would seem to be a clear winner. Use Cases Examples of real-world examples where NestView may be a useful option: Where screen real-estate is at a premium a. On devices such as tablets, notepads and smartphones b. When showing code on websites c. When multiple code windows need to be visible on the desktop simultaneously Where consistent whitespace indentation of text within code is a priority For reviewing deeply nested code. For example where sub-languages (e.g. Linq in C# or XPath in XSLT) might cause high levels of nesting. Accessibility Resizing and color options must be provided to aid those with visual impairments, and also to suit environmental conditions and personal preferences: Compatability of edited code with other systems A solution incorporating a NestView option should ideally be capable of stripping leading tab and space characters (identified as only having a formatting role) from imported code. Then, once stripped, the code could be rendered neatly in both the left-justified and indented views without change. For many users relying on systems such as merging and diff tools that are not whitespace-aware this will be a major concern (if not a complete show-stopper). Other Works: Visualisation of Overlapping Markup Published research by Wendell Piez, dated from 2004, addresses the issue of the visualisation of overlapping markup, specifically LMNL. This includes SVG graphics with significant similarities to the NestView proposal, as such, they are acknowledged here. The visual differences are clear in the images (below), the key functional distinction is that NestView is intended only for well-nested XML or code, whereas Wendell Piez's graphics are designed to represent overlapped nesting. The graphics above were reproduced - with kind permission - from http://www.piez.org Sources: Towards Hermenutic Markup Half-steps toward LMNL

  Read the article

• General monitoring for SQL Server Analysis Services using Performance Monitor

  - by Testas

  A recent customer engagement required a setup of a monitoring solution for SSAS, due to the time restrictions placed upon this, native Windows Performance Monitor (Perfmon) and SQL Server Profiler Monitoring Tools was used as using a third party tool would have meant the customer providing an additional monitoring server that was not available.I wanted to outline the performance monitoring counters that was used to monitor the system on which SSAS was running. Due to the slow query performance that was occurring during certain scenarios, perfmon was used to establish if any pressure was being placed on the Disk, CPU or Memory subsystem when concurrent connections access the same query, and Profiler to pinpoint how the query was being managed within SSAS, profiler I will leave for another blogThis guide is not designed to provide a definitive list of what should be used when monitoring SSAS, different situations may require the addition or removal of counters as presented by the situation. However I hope that it serves as a good basis for starting your monitoring of SSAS. I would also like to acknowledge Chris Webb’s awesome chapters from “Expert Cube Development” that also helped shape my monitoring strategy:http://cwebbbi.spaces.live.com/blog/cns!7B84B0F2C239489A!6657.entrySimulating ConnectionsTo simulate the additional connections to the SSAS server whilst monitoring, I used ascmd to simulate multiple connections to the typical and worse performing queries that were identified by the customer. A similar sript can be downloaded from codeplex at http://www.codeplex.com/SQLSrvAnalysisSrvcs.     File name: ASCMD_StressTestingScripts.zip. Performance MonitorWithin performance monitor,  a counter log was created that contained the list of counters below. The important point to note when running the counter log is that the RUN AS property within the counter log properties should be changed to an account that has rights to the SSAS instance when monitoring MSAS counters. Failure to do so means that the counter log runs under the system account, no errors or warning are given while running the counter log, and it is not until you need to view the MSAS counters that they will not be displayed if run under the default account that has no right to SSAS. If your connection simulation takes hours, this could prove quite frustrating if not done beforehand JThe counters used……  Object Counter Instance Justification System Processor Queue legnth N/A Indicates how many threads are waiting for execution against the processor. If this counter is consistently higher than around 5 when processor utilization approaches 100%, then this is a good indication that there is more work (active threads) available (ready for execution) than the machine's processors are able to handle. System Context Switches/sec N/A Measures how frequently the processor has to switch from user- to kernel-mode to handle a request from a thread running in user mode. The heavier the workload running on your machine, the higher this counter will generally be, but over long term the value of this counter should remain fairly constant. If this counter suddenly starts increasing however, it may be an indicating of a malfunctioning device, especially if the Processor\Interrupts/sec\(_Total) counter on your machine shows a similar unexplained increase Process % Processor Time sqlservr Definately should be used if Processor\% Processor Time\(_Total) is maxing at 100% to assess the effect of the SQL Server process on the processor Process % Processor Time msmdsrv Definately should be used if Processor\% Processor Time\(_Total) is maxing at 100% to assess the effect of the SQL Server process on the processor Process Working Set sqlservr If the Memory\Available bytes counter is decreaing this counter can be run to indicate if the process is consuming larger and larger amounts of RAM. Process(instance)\Working Set measures the size of the working set for each process, which indicates the number of allocated pages the process can address without generating a page fault. Process Working Set msmdsrv If the Memory\Available bytes counter is decreaing this counter can be run to indicate if the process is consuming larger and larger amounts of RAM. Process(instance)\Working Set measures the size of the working set for each process, which indicates the number of allocated pages the process can address without generating a page fault. Processor % Processor Time _Total and individual cores measures the total utilization of your processor by all running processes. If multi-proc then be mindful only an average is provided Processor % Privileged Time _Total To see how the OS is handling basic IO requests. If kernel mode utilization is high, your machine is likely underpowered as it's too busy handling basic OS housekeeping functions to be able to effectively run other applications. Processor % User Time _Total To see how the applications is interacting from a processor perspective, a high percentage utilisation determine that the server is dealing with too many apps and may require increasing thje hardware or scaling out Processor Interrupts/sec _Total  The average rate, in incidents per second, at which the processor received and serviced hardware interrupts. Shoulr be consistant over time but a sudden unexplained increase could indicate a device malfunction which can be confirmed using the System\Context Switches/sec counter Memory Pages/sec N/A Indicates the rate at which pages are read from or written to disk to resolve hard page faults. This counter is a primary indicator of the kinds of faults that cause system-wide delays, this is the primary counter to watch for indication of possible insufficient RAM to meet your server's needs. A good idea here is to configure a perfmon alert that triggers when the number of pages per second exceeds 50 per paging disk on your system. May also want to see the configuration of the page file on the Server Memory Available Mbytes N/A is the amount of physical memory, in bytes, available to processes running on the computer. if this counter is greater than 10% of the actual RAM in your machine then you probably have more than enough RAM. monitor it regularly to see if any downward trend develops, and set an alert to trigger if it drops below 2% of the installed RAM. Physical Disk Disk Transfers/sec for each physical disk If it goes above 10 disk I/Os per second then you've got poor response time for your disk. Physical Disk Idle Time _total If Disk Transfers/sec is above  25 disk I/Os per second use this counter. which measures the percent time that your hard disk is idle during the measurement interval, and if you see this counter fall below 20% then you've likely got read/write requests queuing up for your disk which is unable to service these requests in a timely fashion. Physical Disk Disk queue legnth For the OLAP and SQL physical disk A value that is consistently less than 2 means that the disk system is handling the IO requests against the physical disk Network Interface Bytes Total/sec For the NIC Should be monitored over a period of time to see if there is anb increase/decrease in network utilisation Network Interface Current Bandwidth For the NIC is an estimate of the current bandwidth of the network interface in bits per second (BPS). MSAS 2005: Memory Memory Limit High KB N/A Shows (as a percentage) the high memory limit configured for SSAS in C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config\msmdsrv.ini MSAS 2005: Memory Memory Limit Low KB N/A Shows (as a percentage) the low memory limit configured for SSAS in C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config\msmdsrv.ini MSAS 2005: Memory Memory Usage KB N/A Displays the memory usage of the server process. MSAS 2005: Memory File Store KB N/A Displays the amount of memory that is reserved for the Cache. Note if total memory limit in the msmdsrv.ini is set to 0, no memory is reserved for the cache MSAS 2005: Storage Engine Query Queries from Cache Direct / sec N/A Displays the rate of queries answered from the cache directly MSAS 2005: Storage Engine Query Queries from Cache Filtered / Sec N/A Displays the Rate of queries answered by filtering existing cache entry. MSAS 2005: Storage Engine Query Queries from File / Sec N/A Displays the Rate of queries answered from files. MSAS 2005: Storage Engine Query Average time /query N/A Displays the average time of a query MSAS 2005: Connection Current connections N/A Displays the number of connections against the SSAS instance MSAS 2005: Connection Requests / sec N/A Displays the rate of query requests per second MSAS 2005: Locks Current Lock Waits N/A Displays thhe number of connections waiting on a lock MSAS 2005: Threads Query Pool job queue Length N/A The number of queries in the job queue MSAS 2005:Proc Aggregations Temp file bytes written/sec N/A Shows the number of bytes of data processed in a temporary file MSAS 2005:Proc Aggregations Temp file rows written/sec N/A Shows the number of bytes of data processed in a temporary file 

  Read the article

• Process.Start() and ShellExecute() fails with URLs on Windows 8

  - by Rick Strahl

  Since I installed Windows 8 I've noticed that a number of my applications appear to have problems opening URLs. That is when I click on a link inside of a Windows application, either nothing happens or there's an error that occurs. It's happening both to my own applications and a host of Windows applications I'm running. At first I thought this was an issue with my default browser (Chrome) but after switching the default browser to a few others and experimenting a bit I noticed that the errors occur - oddly enough - only when I run an application as an Administrator. I also tried switching to FireFox and Opera as my default browser and saw exactly the same behavior. The scenario for this is a bit bizarre: Running on Windows 8 Call Process.Start() (or ShellExecute() in Win32 API) with a URL or an HTML file Run 'As Administrator' (works fine under non-elevated user account!) or with UAC off A browser other than Internet Explorer is set as your Default Web Browser Talk about a weird scenario: Something that doesn't work when you run as an Administrator which is supposed to have rights to everything on the system! Instead running under an Admin account - either elevated with a User Account Control prompt or even when running as a full Administrator fails. It appears that this problem does not occur for everyone, but when I looked for a solution to this, I saw quite a few posts in relation to this with no clear resolutions. I have three Windows 8 machines running here in the office and all three of them showed this behavior. Lest you think this is just a programmer's problem - this can affect any software running on your system that needs to run under administrative rights. Try it out Now, in order for this next example to fail, any browser but Internet Explorer has to be your default browser and even then it may not fail depending on how you installed your browser. To see if this is a problem create a small Console application and call Process.Start() with a URL in it:namespace Win8ShellBugConsole { class Program { static void Main(string[] args) { Console.WriteLine("Launching Url..."); Process.Start("http://microsoft.com"); Console.Write("Press any key to continue..."); Console.ReadKey(); Console.WriteLine("\r\n\r\nLaunching image..."); Process.Start(Path.GetFullPath(@"..\..\sailbig.jpg")); Console.Write("Press any key to continue..."); Console.ReadKey(); } } } Compile this code. Then execute the code from Explorer (not from Visual Studio because that may change the permissions). If you simply run the EXE and you're not running as an administrator, you'll see the Web page pop up in the browser as well as the image loading. Now run the same thing with Run As Administrator: Now when you run it you get a nice error when Process.Start() is fired: The same happens if you are running with User Account Control off altogether - ie. you are running as a full admin account. Now if you comment out the URL in the code above and just fire the image display - that works just fine in any user mode. As does opening any other local file type or even starting a new EXE locally (ie. Process.Start("c:\windows\notepad.exe"). All that works, EXCEPT for URLs. The code above uses Process.Start() in .NET but the same happens in Win32 Applications that use the ShellExecute API. In some of my older Fox apps ShellExecute returns an error code of 31 - which is No Shell Association found. What's the Deal? It turns out the problem has to do with the way browsers are registering themselves on Windows. Internet Explorer - being a built-in application in Windows 8 - apparently does this correctly, but other browsers possibly don't or at least didn't at the time I installed them. So even Chrome, which continually updates itself, has a recent version that apparently has this registration issue fixed, I was unable to simply set IE as my default browser then use Chrome to 'Set as Default Browser'. It still didn't work. Neither did using the Set Program Associations dialog which lets you assign what extensions are mapped to by a given application. Each application provides a set of extension/moniker mappings that it supports and this dialog lets you associate them on a system wide basis. This also did not work for Chrome or any of the other browsers at first. However, after repeated retries here eventually I did manage to get FireFox to work, but not any of the others. What Works? Reinstall the Browser In the end I decided on the hard core pull the plug solution: Totally uninstall and re-install Chrome in this case. And lo and behold, after reinstall everything was working fine. Now even removing the association for Chrome, switching to IE as the default browser and then back to Chrome works. But, even though the version of Chrome I was running before uninstalling and reinstalling is the same as I'm running now after the reinstall now it works. Of course I had to find out the hard way, before Richard commented with a note regarding what the issue is with Chrome at least: http://code.google.com/p/chromium/issues/detail?id=156400 As expected the issue is a registration issue - with keys not being registered at the machine level. Reading this I'm still not sure why this should be a problem - an elevated account still runs under the same user account (ie. I'm still rickstrahl even if I Run As Administrator), so why shouldn't an app be able to read my Current User registry hive? And also that doesn't quite explain why if I register the extensions using Run As Administrator in Chrome when using Set as Default Browser). But in the end it works… Not so fast It's now a couple of days later and still there are some oddball problems although this time they appear to be purely Chrome issues. After the reinstall Chrome seems to pop up properly with ShellExecute() calls both in regular user and Admin mode. However, it now looks like Chrome is actually running two completely separate user profiles for each. For example, when I run Visual Studio in Admin mode and go to View in browser, Chrome complains that it was installed in Admin mode and can't launch (WTF?). Then you retry a few times later and it ends up working. When launched that way some of the plug-ins installed don't show up with the effect that sometimes they're visible sometimes they're not. Also Chrome seems to loose my configuration and Google sign in between sessions now, presumably when switching user modes. Add-ins installed in admin mode don't show up in user mode and vice versa. Ah, this is lovely. Did I mention that I freaking hate UAC precisely because of this kind of bullshit. You can never tell exactly what account your app is running under, and apparently apps also have a hard time trying to put data into the right place that works for both scenarios. And as my recent post on using Windows Live accounts shows it's yet another level of abstraction ontop of the underlying system identity that can cause all sort of small side effect headaches like this. Hopefully, most of you are skirting this issue altogether - having installed more recent versions of your favorite browsers. If not, hopefully this post will take you straight to reinstallation to fix this annoying issue.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Windows  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #048

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Order of Result Set of SELECT Statement on Clustered Indexed Table When ORDER BY is Not Used Above theory is true in most of the cases. However SQL Server does not use that logic when returning the resultset. SQL Server always returns the resultset which it can return fastest.In most of the cases the resultset which can be returned fastest is the resultset which is returned using clustered index. Effect of TRANSACTION on Local Variable – After ROLLBACK and After COMMIT One of the Jr. Developer asked me this question (What will be the Effect of TRANSACTION on Local Variable – After ROLLBACK and After COMMIT?) while I was rushing to an important meeting. I was getting late so I asked him to talk with his Application Tech Lead. When I came back from meeting both of them were looking for me. They said they are confused. I quickly wrote down following example for them. 2008 SQL SERVER – Guidelines and Coding Standards Complete List Download Coding standards and guidelines are very important for any developer on the path of a successful career. A coding standard is a set of guidelines, rules and regulations on how to write code. Coding standards should be flexible enough or should take care of the situation where they should not prevent best practices for coding. They are basically the guidelines that one should follow for better understanding. Download Guidelines and Coding Standards complete List Download Get Answer in Float When Dividing of Two Integer Many times we have requirements of some calculations amongst different fields in Tables. One of the software developers here was trying to calculate some fields having integer values and divide it which gave incorrect results in integer where accurate results including decimals was expected. Puzzle – Computed Columns Datatype Explanation SQL Server automatically does a cast to the data type having the highest precedence. So the result of INT and INT will be INT, but INT and FLOAT will be FLOAT because FLOAT has a higher precedence. If you want a different data type, you need to do an EXPLICIT cast. Renaming SP is Not Good Idea – Renaming Stored Procedure Does Not Update sys.procedures I have written many articles about renaming a tables, columns and procedures SQL SERVER – How to Rename a Column Name or Table Name, here I found something interesting about renaming the stored procedures and felt like sharing it with you all. The interesting fact is that when we rename a stored procedure using SP_Rename command, the Stored Procedure is successfully renamed. But when we try to test the procedure using sp_helptext, the procedure will be having the old name instead of new names. 2009 Insert Values of Stored Procedure in Table – Use Table Valued Function It is clear from the result set that , where I have converted stored procedure logic into the table valued function, is much better in terms of logic as it saves a large number of operations. However, this option should be used carefully. The performance of the stored procedure is “usually” better than that of functions. Interesting Observation – Index on Index View Used in Similar Query Recently, I was working on an optimization project for one of the largest organizations. While working on one of the queries, we came across a very interesting observation. We found that there was a query on the base table and when the query was run, it used the index, which did not exist in the base table. On careful examination, we found that the query was using the index that was on another view. This was very interesting as I have personally never experienced a scenario like this. In simple words, “Query on the base table can use the index created on the indexed view of the same base table.” Interesting Observation – Execution Plan and Results of Aggregate Concatenation Queries Working with SQL Server has never seemed to be monotonous – no matter how long one has worked with it. Quite often, I come across some excellent comments that I feel like acknowledging them as blog posts. Recently, I wrote an article on SQL SERVER – Execution Plan and Results of Aggregate Concatenation Queries Depend Upon Expression Location, which is well received in the community. 2010 I encourage all of you to go through complete series and write your own on the subject. If you write an article and send it to me, I will publish it on this blog with due credit to you. If you write on your own blog, I will update this blog post pointing to your blog post. SQL SERVER – ORDER BY Does Not Work – Limitation of the View 1 SQL SERVER – Adding Column is Expensive by Joining Table Outside View – Limitation of the View 2 SQL SERVER – Index Created on View not Used Often – Limitation of the View 3 SQL SERVER – SELECT * and Adding Column Issue in View – Limitation of the View 4 SQL SERVER – COUNT(*) Not Allowed but COUNT_BIG(*) Allowed – Limitation of the View 5 SQL SERVER – UNION Not Allowed but OR Allowed in Index View – Limitation of the View 6 SQL SERVER – Cross Database Queries Not Allowed in Indexed View – Limitation of the View 7 SQL SERVER – Outer Join Not Allowed in Indexed Views – Limitation of the View 8 SQL SERVER – SELF JOIN Not Allowed in Indexed View – Limitation of the View 9 SQL SERVER – Keywords View Definition Must Not Contain for Indexed View – Limitation of the View 10 SQL SERVER – View Over the View Not Possible with Index View – Limitations of the View 11 2011 Startup Parameters Easy to Configure If you are a regular reader of this blog, you must be aware that I have written about SQL Server Denali recently. Here is the quickest way to reach into the screen where we can change the startup parameters. Go to SQL Server Configuration Manager >> SQL Server Services >> Right Click on the Server >> Properties >> Startup Parameters 2012 Validating Unique Columnname Across Whole Database I sometimes come across very strange requirements and often I do not receive a proper explanation of the same. Here is the one of those examples. For example “Our business requirement is when we add new column we want it unique across current database.” Read the solution to this strange request in this blog post. Excel Losing Decimal Values When Value Pasted from SSMS ResultSet It is very common when users are coping the resultset to Excel, the floating point or decimals are missed. The solution is very much simple and it requires a small adjustment in the Excel. By default Excel is very smart and when it detects the value which is getting pasted is numeric it changes the column format to accommodate that. Basic Calculation and PEMDAS Order of Operation Read this interesting blog post for fantastic conversation about the subject. Copy Column Headers from Resultset – SQL in Sixty Seconds #027 – Video http://www.youtube.com/watch?v=x_-3tLqTRv0 Delete From Multiple Table – Update Multiple Table in Single Statement There are two questions which I get every single day multiple times. In my gmail, I have created standard canned reply for them. Let us see the questions here. I want to delete from multiple table in a single statement how will I do it? I want to update multiple table in a single statement how will I do it? Read the answer in the blog post. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Cost Comparison Hard Disk Drive to Solid State Drive on Price per Gigabyte - dispelling a myth!

  - by tonyrogerson

  It is often said that Hard Disk Drive storage is significantly cheaper per GiByte than Solid State Devices – this is wholly inaccurate within the database space. People need to look at the cost of the complete solution and not just a single component part in isolation to what is really required to meet the business requirement. Buying a single Hitachi Ultrastar 600GB 3.5” SAS 15Krpm hard disk drive will cost approximately £239.60 (http://scan.co.uk, 22nd March 2012) compared to an OCZ 600GB Z-Drive R4 CM84 PCIe costing £2,316.54 (http://scan.co.uk, 22nd March 2012); I’ve not included FusionIO ioDrive because there is no public pricing available for it – something I never understand and personally when companies do this I immediately think what are they hiding, luckily in FusionIO’s case the product is proven though is expensive compared to OCZ enterprise offerings. On the face of it the single 15Krpm hard disk has a price per GB of £0.39, the SSD £3.86; this is what you will see in the press and this is what sales people will use in comparing the two technologies – do not be fooled by this bullshit people! What is the requirement? The requirement is the database will have a static size of 400GB kept static through archiving so growth and trim will balance the database size, the client requires resilience, there will be several hundred call centre staff querying the database where queries will read a small amount of data but there will be no hot spot in the data so the randomness will come across the entire 400GB of the database, estimates predict that the IOps required will be approximately 4,000IOps at peak times, because it’s a call centre system the IO latency is important and must remain below 5ms per IO. The balance between read and write is 70% read, 30% write. The requirement is now defined and we have three of the most important pieces of the puzzle – space required, estimated IOps and maximum latency per IO. Something to consider with regard SQL Server; write activity requires synchronous IO to the storage media specifically the transaction log; that means the write thread will wait until the IO is completed and hardened off until the thread can continue execution, the requirement has stated that 30% of the system activity will be write so we can expect a high amount of synchronous activity. The hardware solution needs to be defined; two possible solutions: hard disk or solid state based; the real question now is how many hard disks are required to achieve the IO throughput, the latency and resilience, ditto for the solid state. Hard Drive solution On a test on an HP DL380, P410i controller using IOMeter against a single 15Krpm 146GB SAS drive, the throughput given on a transfer size of 8KiB against a 40GiB file on a freshly formatted disk where the partition is the only partition on the disk thus the 40GiB file is on the outer edge of the drive so more sectors can be read before head movement is required: For 100% sequential IO at a queue depth of 16 with 8 worker threads 43,537 IOps at an average latency of 2.93ms (340 MiB/s), for 100% random IO at the same queue depth and worker threads 3,733 IOps at an average latency of 34.06ms (34 MiB/s). The same test was done on the same disk but the test file was 130GiB: For 100% sequential IO at a queue depth of 16 with 8 worker threads 43,537 IOps at an average latency of 2.93ms (340 MiB/s), for 100% random IO at the same queue depth and worker threads 528 IOps at an average latency of 217.49ms (4 MiB/s). From the result it is clear random performance gets worse as the disk fills up – I’m currently writing an article on short stroking which will cover this in detail. Given the work load is random in nature looking at the random performance of the single drive when only 40 GiB of the 146 GB is used gives near the IOps required but the latency is way out. Luckily I have tested 6 x 15Krpm 146GB SAS 15Krpm drives in a RAID 0 using the same test methodology, for the same test above on a 130 GiB for each drive added the performance boost is near linear, for each drive added throughput goes up by 5 MiB/sec, IOps by 700 IOps and latency reducing nearly 50% per drive added (172 ms, 94 ms, 65 ms, 47 ms, 37 ms, 30 ms). This is because the same 130GiB is spread out more as you add drives 130 / 1, 130 / 2, 130 / 3 etc. so implicit short stroking is occurring because there is less file on each drive so less head movement required. The best latency is still 30 ms but we have the IOps required now, but that’s on a 130GiB file and not the 400GiB we need. Some reality check here: a) the drive randomness is more likely to be 50/50 and not a full 100% but the above has highlighted the effect randomness has on the drive and the more a drive fills with data the worse the effect. For argument sake let us assume that for the given workload we need 8 disks to do the job, for resilience reasons we will need 16 because we need to RAID 1+0 them in order to get the throughput and the resilience, RAID 5 would degrade performance. Cost for hard drives: 16 x £239.60 = £3,833.60 For the hard drives we will need disk controllers and a separate external disk array because the likelihood is that the server itself won’t take the drives, a quick spec off DELL for a PowerVault MD1220 which gives the dual pathing with 16 disks 146GB 15Krpm 2.5” disks is priced at £7,438.00, note its probably more once we had two controller cards to sit in the server in, racking etc. Minimum cost taking the DELL quote as an example is therefore: {Cost of Hardware} / {Storage Required} £7,438.60 / 400 = £18.595 per GB £18.59 per GiB is a far cry from the £0.39 we had been told by the salesman and the myth. Yes, the storage array is composed of 16 x 146 disks in RAID 10 (therefore 8 usable) giving an effective usable storage availability of 1168GB but the actual storage requirement is only 400 and the extra disks have had to be purchased to get the  IOps up. Solid State Drive solution A single card significantly exceeds the IOps and latency required, for resilience two will be required. ( £2,316.54 * 2 ) / 400 = £11.58 per GB With the SSD solution only two PCIe sockets are required, no external disk units, no additional controllers, no redundant controllers etc. Conclusion I hope by showing you an example that the myth that hard disk drives are cheaper per GiB than Solid State has now been dispelled - £11.58 per GB for SSD compared to £18.59 for Hard Disk. I’ve not even touched on the running costs, compare the costs of running 18 hard disks, that’s a lot of heat and power compared to two PCIe cards!Just a quick note: I've left a fair amount of information out due to this being a blog! If in doubt, email me :)I'll also deal with the myth that SSD's wear out at a later date as well - that's just way over done still, yes, 5 years ago, but now - no.

  Read the article

• I see no LOBs!

  - by Paul White

  Is it possible to see LOB (large object) logical reads from STATISTICS IO output on a table with no LOB columns? I was asked this question today by someone who had spent a good fraction of their afternoon trying to work out why this was occurring – even going so far as to re-run DBCC CHECKDB to see if any corruption had taken place.  The table in question wasn’t particularly pretty – it had grown somewhat organically over time, with new columns being added every so often as the need arose.  Nevertheless, it remained a simple structure with no LOB columns – no TEXT or IMAGE, no XML, no MAX types – nothing aside from ordinary INT, MONEY, VARCHAR, and DATETIME types.  To add to the air of mystery, not every query that ran against the table would report LOB logical reads – just sometimes – but when it did, the query often took much longer to execute. Ok, enough of the pre-amble.  I can’t reproduce the exact structure here, but the following script creates a table that will serve to demonstrate the effect: IF OBJECT_ID(N'dbo.Test', N'U') IS NOT NULL DROP TABLE dbo.Test GO CREATE TABLE dbo.Test ( row_id NUMERIC IDENTITY NOT NULL,   col01 NVARCHAR(450) NOT NULL, col02 NVARCHAR(450) NOT NULL, col03 NVARCHAR(450) NOT NULL, col04 NVARCHAR(450) NOT NULL, col05 NVARCHAR(450) NOT NULL, col06 NVARCHAR(450) NOT NULL, col07 NVARCHAR(450) NOT NULL, col08 NVARCHAR(450) NOT NULL, col09 NVARCHAR(450) NOT NULL, col10 NVARCHAR(450) NOT NULL, CONSTRAINT [PK dbo.Test row_id] PRIMARY KEY CLUSTERED (row_id) ) ; The next script loads the ten variable-length character columns with one-character strings in the first row, two-character strings in the second row, and so on down to the 450th row: WITH Numbers AS ( -- Generates numbers 1 - 450 inclusive SELECT TOP (450) n = ROW_NUMBER() OVER (ORDER BY (SELECT 0)) FROM master.sys.columns C1, master.sys.columns C2, master.sys.columns C3 ORDER BY n ASC ) INSERT dbo.Test WITH (TABLOCKX) SELECT REPLICATE(N'A', N.n), REPLICATE(N'B', N.n), REPLICATE(N'C', N.n), REPLICATE(N'D', N.n), REPLICATE(N'E', N.n), REPLICATE(N'F', N.n), REPLICATE(N'G', N.n), REPLICATE(N'H', N.n), REPLICATE(N'I', N.n), REPLICATE(N'J', N.n) FROM Numbers AS N ORDER BY N.n ASC ; Once those two scripts have run, the table contains 450 rows and 10 columns of data like this: Most of the time, when we query data from this table, we don’t see any LOB logical reads, for example: -- Find the maximum length of the data in -- column 5 for a range of rows SELECT result = MAX(DATALENGTH(T.col05)) FROM dbo.Test AS T WHERE row_id BETWEEN 50 AND 100 ; But with a different query… -- Read all the data in column 1 SELECT result = MAX(DATALENGTH(T.col01)) FROM dbo.Test AS T ; …suddenly we have 49 LOB logical reads, as well as the ‘normal’ logical reads we would expect. The Explanation If we had tried to create this table in SQL Server 2000, we would have received a warning message to say that future INSERT or UPDATE operations on the table might fail if the resulting row exceeded the in-row storage limit of 8060 bytes.  If we needed to store more data than would fit in an 8060 byte row (including internal overhead) we had to use a LOB column – TEXT, NTEXT, or IMAGE.  These special data types store the large data values in a separate structure, with just a small pointer left in the original row. Row Overflow SQL Server 2005 introduced a feature called row overflow, which allows one or more variable-length columns in a row to move to off-row storage if the data in a particular row would otherwise exceed 8060 bytes.  You no longer receive a warning when creating (or altering) a table that might need more than 8060 bytes of in-row storage; if SQL Server finds that it can no longer fit a variable-length column in a particular row, it will silently move one or more of these columns off the row into a separate allocation unit. Only variable-length columns can be moved in this way (for example the (N)VARCHAR, VARBINARY, and SQL_VARIANT types).  Fixed-length columns (like INTEGER and DATETIME for example) never move into ‘row overflow’ storage.  The decision to move a column off-row is done on a row-by-row basis – so data in a particular column might be stored in-row for some table records, and off-row for others. In general, if SQL Server finds that it needs to move a column into row-overflow storage, it moves the largest variable-length column record for that row.  Note that in the case of an UPDATE statement that results in the 8060 byte limit being exceeded, it might not be the column that grew that is moved! Sneaky LOBs Anyway, that’s all very interesting but I don’t want to get too carried away with the intricacies of row-overflow storage internals.  The point is that it is now possible to define a table with non-LOB columns that will silently exceed the old row-size limit and result in ordinary variable-length columns being moved to off-row storage.  Adding new columns to a table, expanding an existing column definition, or simply storing more data in a column than you used to – all these things can result in one or more variable-length columns being moved off the row. Note that row-overflow storage is logically quite different from old-style LOB and new-style MAX data type storage – individual variable-length columns are still limited to 8000 bytes each – you can just have more of them now.  Having said that, the physical mechanisms involved are very similar to full LOB storage – a column moved to row-overflow leaves a 24-byte pointer record in the row, and the ‘separate storage’ I have been talking about is structured very similarly to both old-style LOBs and new-style MAX types.  The disadvantages are also the same: when SQL Server needs a row-overflow column value it needs to follow the in-row pointer a navigate another chain of pages, just like retrieving a traditional LOB. And Finally… In the example script presented above, the rows with row_id values from 402 to 450 inclusive all exceed the total in-row storage limit of 8060 bytes.  A SELECT that references a column in one of those rows that has moved to off-row storage will incur one or more lob logical reads as the storage engine locates the data.  The results on your system might vary slightly depending on your settings, of course; but in my tests only column 1 in rows 402-450 moved off-row.  You might like to play around with the script – updating columns, changing data type lengths, and so on – to see the effect on lob logical reads and which columns get moved when.  You might even see row-overflow columns moving back in-row if they are updated to be smaller (hint: reduce the size of a column entry by at least 1000 bytes if you hope to see this). Be aware that SQL Server will not warn you when it moves ‘ordinary’ variable-length columns into overflow storage, and it can have dramatic effects on performance.  It makes more sense than ever to choose column data types sensibly.  If you make every column a VARCHAR(8000) or NVARCHAR(4000), and someone stores data that results in a row needing more than 8060 bytes, SQL Server might turn some of your column data into pseudo-LOBs – all without saying a word. Finally, some people make a distinction between ordinary LOBs (those that can hold up to 2GB of data) and the LOB-like structures created by row-overflow (where columns are still limited to 8000 bytes) by referring to row-overflow LOBs as SLOBs.  I find that quite appealing, but the ‘S’ stands for ‘small’, which makes expanding the whole acronym a little daft-sounding…small large objects anyone? © Paul White 2011 email: [email protected] twitter: @SQL_Kiwi

  Read the article

• Pixel Shader Giving Black output

  - by Yashwinder

  I am coding in C# using Windows Forms and the SlimDX API to show the effect of a pixel shader. When I am setting the pixel shader, I am getting a black output screen but if I am not using the pixel shader then I am getting my image rendered on the screen. I have the following C# code using System; using System.Collections.Generic; using System.Linq; using System.Windows.Forms; using System.Runtime.InteropServices; using SlimDX.Direct3D9; using SlimDX; using SlimDX.Windows; using System.Drawing; using System.Threading; namespace WindowsFormsApplication1 { // Vertex structure. [StructLayout(LayoutKind.Sequential)] struct Vertex { public Vector3 Position; public float Tu; public float Tv; public static int SizeBytes { get { return Marshal.SizeOf(typeof(Vertex)); } } public static VertexFormat Format { get { return VertexFormat.Position | VertexFormat.Texture1; } } } static class Program { public static Device D3DDevice; // Direct3D device. public static VertexBuffer Vertices; // Vertex buffer object used to hold vertices. public static Texture Image; // Texture object to hold the image loaded from a file. public static int time; // Used for rotation caculations. public static float angle; // Angle of rottaion. public static Form1 Window =new Form1(); public static string filepath; static VertexShader vertexShader = null; static ConstantTable constantTable = null; static ImageInformation info; [STAThread] static void Main() { filepath = "C:\\Users\\Public\\Pictures\\Sample Pictures\\Garden.jpg"; info = new ImageInformation(); info = ImageInformation.FromFile(filepath); PresentParameters presentParams = new PresentParameters(); // Below are the required bare mininum, needed to initialize the D3D device. presentParams.BackBufferHeight = info.Height; // BackBufferHeight, set to the Window's height. presentParams.BackBufferWidth = info.Width+200; // BackBufferWidth, set to the Window's width. presentParams.Windowed =true; presentParams.DeviceWindowHandle = Window.panel2 .Handle; // DeviceWindowHandle, set to the Window's handle. // Create the device. D3DDevice = new Device(new Direct3D (), 0, DeviceType.Hardware, Window.Handle, CreateFlags.HardwareVertexProcessing, presentParams); // Create the vertex buffer and fill with the triangle vertices. (Non-indexed) // Remember 3 vetices for a triangle, 2 tris per quad = 6. Vertices = new VertexBuffer(D3DDevice, 6 * Vertex.SizeBytes, Usage.WriteOnly, VertexFormat.None, Pool.Managed); DataStream stream = Vertices.Lock(0, 0, LockFlags.None); stream.WriteRange(BuildVertexData()); Vertices.Unlock(); // Create the texture. Image = Texture.FromFile(D3DDevice,filepath ); // Turn off culling, so we see the front and back of the triangle D3DDevice.SetRenderState(RenderState.CullMode, Cull.None); // Turn off lighting D3DDevice.SetRenderState(RenderState.Lighting, false); ShaderBytecode sbcv = ShaderBytecode.CompileFromFile("C:\\Users\\yashwinder singh\\Desktop\\vertexShader.vs", "vs_main", "vs_1_1", ShaderFlags.None); constantTable = sbcv.ConstantTable; vertexShader = new VertexShader(D3DDevice, sbcv); ShaderBytecode sbc = ShaderBytecode.CompileFromFile("C:\\Users\\yashwinder singh\\Desktop\\pixelShader.txt", "ps_main", "ps_3_0", ShaderFlags.None); PixelShader ps = new PixelShader(D3DDevice, sbc); VertexDeclaration vertexDecl = new VertexDeclaration(D3DDevice, new[] { new VertexElement(0, 0, DeclarationType.Float3, DeclarationMethod.Default, DeclarationUsage.PositionTransformed, 0), new VertexElement(0, 12, DeclarationType.Float2 , DeclarationMethod.Default, DeclarationUsage.TextureCoordinate , 0), VertexElement.VertexDeclarationEnd }); Application.EnableVisualStyles(); MessagePump.Run(Window, () => { // Clear the backbuffer to a black color. D3DDevice.Clear(ClearFlags.Target | ClearFlags.ZBuffer, Color.Black, 1.0f, 0); // Begin the scene. D3DDevice.BeginScene(); // Setup the world, view and projection matrices. //D3DDevice.VertexShader = vertexShader; //D3DDevice.PixelShader = ps; // Render the vertex buffer. D3DDevice.SetStreamSource(0, Vertices, 0, Vertex.SizeBytes); D3DDevice.VertexFormat = Vertex.Format; // Setup our texture. Using Textures introduces the texture stage states, // which govern how Textures get blended together (in the case of multiple // Textures) and lighting information. D3DDevice.SetTexture(0, Image); // Now drawing 2 triangles, for a quad. D3DDevice.DrawPrimitives(PrimitiveType.TriangleList , 0, 2); // End the scene. D3DDevice.EndScene(); // Present the backbuffer contents to the screen. D3DDevice.Present(); }); if (Image != null) Image.Dispose(); if (Vertices != null) Vertices.Dispose(); if (D3DDevice != null) D3DDevice.Dispose(); } private static Vertex[] BuildVertexData() { Vertex[] vertexData = new Vertex[6]; vertexData[0].Position = new Vector3(-1.0f, 1.0f, 0.0f); vertexData[0].Tu = 0.0f; vertexData[0].Tv = 0.0f; vertexData[1].Position = new Vector3(-1.0f, -1.0f, 0.0f); vertexData[1].Tu = 0.0f; vertexData[1].Tv = 1.0f; vertexData[2].Position = new Vector3(1.0f, 1.0f, 0.0f); vertexData[2].Tu = 1.0f; vertexData[2].Tv = 0.0f; vertexData[3].Position = new Vector3(-1.0f, -1.0f, 0.0f); vertexData[3].Tu = 0.0f; vertexData[3].Tv = 1.0f; vertexData[4].Position = new Vector3(1.0f, -1.0f, 0.0f); vertexData[4].Tu = 1.0f; vertexData[4].Tv = 1.0f; vertexData[5].Position = new Vector3(1.0f, 1.0f, 0.0f); vertexData[5].Tu = 1.0f; vertexData[5].Tv = 0.0f; return vertexData; } } } And my pixel shader and vertex shader code are as following // Pixel shader input structure struct PS_INPUT { float4 Position : POSITION; float2 Texture : TEXCOORD0; }; // Pixel shader output structure struct PS_OUTPUT { float4 Color : COLOR0; }; // Global variables sampler2D Tex0; // Name: Simple Pixel Shader // Type: Pixel shader // Desc: Fetch texture and blend with constant color // PS_OUTPUT ps_main( in PS_INPUT In ) { PS_OUTPUT Out; //create an output pixel Out.Color = tex2D(Tex0, In.Texture); //do a texture lookup Out.Color *= float4(0.9f, 0.8f, 0.0f, 1); //do a simple effect return Out; //return output pixel } // Vertex shader input structure struct VS_INPUT { float4 Position : POSITION; float2 Texture : TEXCOORD0; }; // Vertex shader output structure struct VS_OUTPUT { float4 Position : POSITION; float2 Texture : TEXCOORD0; }; // Global variables float4x4 WorldViewProj; // Name: Simple Vertex Shader // Type: Vertex shader // Desc: Vertex transformation and texture coord pass-through // VS_OUTPUT vs_main( in VS_INPUT In ) { VS_OUTPUT Out; //create an output vertex Out.Position = mul(In.Position, WorldViewProj); //apply vertex transformation Out.Texture = In.Texture; //copy original texcoords return Out; //return output vertex }

  Read the article

• how to define a field of view for the entire map for shadow?

  - by Mehdi Bugnard

  I recently added "Shadow Mapping" in my XNA games to include shadows. I followed the nice and famous tutorial from "Riemers" : http://www.riemers.net/eng/Tutorials/XNA/Csharp/Series3/Shadow_map.php . This code work nice and I can see my source of light and shadow. But the problem is that my light source does not match the field of view that I created. I want the light covers the entire map of my game. I don't know why , but the light only affect 2-3 cubes of my map. ScreenShot: (the emission of light illuminates only 2-3 blocks and not the full map) Here is my code i create the fieldOfView for LightviewProjection Matrix: Vector3 lightDir = new Vector3(10, 52, 10); lightPos = new Vector3(10, 52, 10); Matrix lightsView = Matrix.CreateLookAt(lightPos, new Vector3(105, 50, 105), new Vector3(0, 1, 0)); Matrix lightsProjection = Matrix.CreatePerspectiveFieldOfView(MathHelper.PiOver2, 1f, 20f, 1000f); lightsViewProjectionMatrix = lightsView * lightsProjection; As you can see , my nearPlane and FarPlane are set to 20f and 100f . So i don't know why the light stop after 2 cubes. it's should be bigger Here is set the value to my custom effect HLSL in the shader file /* SHADOW VALUE */ effectWorld.Parameters["LightDirection"].SetValue(lightDir); effectWorld.Parameters["xLightsWorldViewProjection"].SetValue(Matrix.Identity * .lightsViewProjectionMatrix); effectWorld.Parameters["xWorldViewProjection"].SetValue(Matrix.Identity * arcadia.camera.View * arcadia.camera.Projection); effectWorld.Parameters["xLightPower"].SetValue(1f); effectWorld.Parameters["xAmbient"].SetValue(0.3f); Here is my custom HLSL shader effect file "*.fx" // This sample uses a simple Lambert lighting model. float3 LightDirection = normalize(float3(-1, -1, -1)); float3 DiffuseLight = 1.25; float3 AmbientLight = 0.25; uniform const float3 DiffuseColor = 1; uniform const float Alpha = 1; uniform const float3 EmissiveColor = 0; uniform const float3 SpecularColor = 1; uniform const float SpecularPower = 16; uniform const float3 EyePosition; // FOG attribut uniform const float FogEnabled ; uniform const float FogStart ; uniform const float FogEnd ; uniform const float3 FogColor ; float3 cameraPos : CAMERAPOS; texture Texture; sampler Sampler = sampler_state { Texture = (Texture); magfilter = LINEAR; minfilter = LINEAR; mipfilter = LINEAR; AddressU = mirror; AddressV = mirror; }; texture xShadowMap; sampler ShadowMapSampler = sampler_state { Texture = <xShadowMap>; magfilter = LINEAR; minfilter = LINEAR; mipfilter = LINEAR; AddressU = clamp; AddressV = clamp; }; /* *************** */ /* SHADOW MAP CODE */ /* *************** */ struct SMapVertexToPixel { float4 Position : POSITION; float4 Position2D : TEXCOORD0; }; struct SMapPixelToFrame { float4 Color : COLOR0; }; struct SSceneVertexToPixel { float4 Position : POSITION; float4 Pos2DAsSeenByLight : TEXCOORD0; float2 TexCoords : TEXCOORD1; float3 Normal : TEXCOORD2; float4 Position3D : TEXCOORD3; }; struct SScenePixelToFrame { float4 Color : COLOR0; }; float DotProduct(float3 lightPos, float3 pos3D, float3 normal) { float3 lightDir = normalize(pos3D - lightPos); return dot(-lightDir, normal); } SSceneVertexToPixel ShadowedSceneVertexShader(float4 inPos : POSITION, float2 inTexCoords : TEXCOORD0, float3 inNormal : NORMAL) { SSceneVertexToPixel Output = (SSceneVertexToPixel)0; Output.Position = mul(inPos, xWorldViewProjection); Output.Pos2DAsSeenByLight = mul(inPos, xLightsWorldViewProjection); Output.Normal = normalize(mul(inNormal, (float3x3)World)); Output.Position3D = mul(inPos, World); Output.TexCoords = inTexCoords; return Output; } SScenePixelToFrame ShadowedScenePixelShader(SSceneVertexToPixel PSIn) { SScenePixelToFrame Output = (SScenePixelToFrame)0; float2 ProjectedTexCoords; ProjectedTexCoords[0] = PSIn.Pos2DAsSeenByLight.x / PSIn.Pos2DAsSeenByLight.w / 2.0f + 0.5f; ProjectedTexCoords[1] = -PSIn.Pos2DAsSeenByLight.y / PSIn.Pos2DAsSeenByLight.w / 2.0f + 0.5f; float diffuseLightingFactor = 0; if ((saturate(ProjectedTexCoords).x == ProjectedTexCoords.x) && (saturate(ProjectedTexCoords).y == ProjectedTexCoords.y)) { float depthStoredInShadowMap = tex2D(ShadowMapSampler, ProjectedTexCoords).r; float realDistance = PSIn.Pos2DAsSeenByLight.z / PSIn.Pos2DAsSeenByLight.w; if ((realDistance - 1.0f / 100.0f) <= depthStoredInShadowMap) { diffuseLightingFactor = DotProduct(xLightPos, PSIn.Position3D, PSIn.Normal); diffuseLightingFactor = saturate(diffuseLightingFactor); diffuseLightingFactor *= xLightPower; } } float4 baseColor = tex2D(Sampler, PSIn.TexCoords); Output.Color = baseColor*(diffuseLightingFactor + xAmbient); return Output; } SMapVertexToPixel ShadowMapVertexShader(float4 inPos : POSITION) { SMapVertexToPixel Output = (SMapVertexToPixel)0; Output.Position = mul(inPos, xLightsWorldViewProjection); Output.Position2D = Output.Position; return Output; } SMapPixelToFrame ShadowMapPixelShader(SMapVertexToPixel PSIn) { SMapPixelToFrame Output = (SMapPixelToFrame)0; Output.Color = PSIn.Position2D.z / PSIn.Position2D.w; return Output; } /* ******************* */ /* END SHADOW MAP CODE */ /* ******************* */ / For rendering without instancing. technique ShadowMap { pass Pass0 { VertexShader = compile vs_2_0 ShadowMapVertexShader(); PixelShader = compile ps_2_0 ShadowMapPixelShader(); } } technique ShadowedScene { /* pass Pass0 { VertexShader = compile vs_2_0 VSBasicTx(); PixelShader = compile ps_2_0 PSBasicTx(); } */ pass Pass1 { VertexShader = compile vs_2_0 ShadowedSceneVertexShader(); PixelShader = compile ps_2_0 ShadowedScenePixelShader(); } } technique SimpleFog { pass Pass0 { VertexShader = compile vs_2_0 VSBasicTx(); PixelShader = compile ps_2_0 PSBasicTx(); } } I edited my fx file , for show you only information and functions about the shadow ;-)

  Read the article

• GLSL: Strange light reflections [Solved]

  - by Tom

  According to this tutorial I'm trying to make a normal mapping using GLSL, but something is wrong and I can't find the solution. The output render is in this image: Image1 in this image is a plane with two triangles and each of it is different illuminated (that is bad). The plane has 6 vertices. In the upper left side of this plane are 2 identical vertices (same in the lower right). Here are some vectors same for each vertice: normal vector = 0, 1, 0 (red lines on image) tangent vector = 0, 0,-1 (green lines on image) bitangent vector = -1, 0, 0 (blue lines on image) here I have one question: The two identical vertices does need to have the same tangent and bitangent? I have tried to make other values to the tangents but the effect was still similar. Here are my shaders Vertex shader: #version 130 // Input vertex data, different for all executions of this shader. in vec3 vertexPosition_modelspace; in vec2 vertexUV; in vec3 vertexNormal_modelspace; in vec3 vertexTangent_modelspace; in vec3 vertexBitangent_modelspace; // Output data ; will be interpolated for each fragment. out vec2 UV; out vec3 Position_worldspace; out vec3 EyeDirection_cameraspace; out vec3 LightDirection_cameraspace; out vec3 LightDirection_tangentspace; out vec3 EyeDirection_tangentspace; // Values that stay constant for the whole mesh. uniform mat4 MVP; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Output position of the vertex, in clip space : MVP * position gl_Position = MVP * vec4(vertexPosition_modelspace,1); // Position of the vertex, in worldspace : M * position Position_worldspace = (M * vec4(vertexPosition_modelspace,1)).xyz; // Vector that goes from the vertex to the camera, in camera space. // In camera space, the camera is at the origin (0,0,0). vec3 vertexPosition_cameraspace = ( V * M * vec4(vertexPosition_modelspace,1)).xyz; EyeDirection_cameraspace = vec3(0,0,0) - vertexPosition_cameraspace; // Vector that goes from the vertex to the light, in camera space. M is ommited because it's identity. vec3 LightPosition_cameraspace = ( V * vec4(LightPosition_worldspace,1)).xyz; LightDirection_cameraspace = LightPosition_cameraspace + EyeDirection_cameraspace; // UV of the vertex. No special space for this one. UV = vertexUV; // model to camera = ModelView vec3 vertexTangent_cameraspace = MV3x3 * vertexTangent_modelspace; vec3 vertexBitangent_cameraspace = MV3x3 * vertexBitangent_modelspace; vec3 vertexNormal_cameraspace = MV3x3 * vertexNormal_modelspace; mat3 TBN = transpose(mat3( vertexTangent_cameraspace, vertexBitangent_cameraspace, vertexNormal_cameraspace )); // You can use dot products instead of building this matrix and transposing it. See References for details. LightDirection_tangentspace = TBN * LightDirection_cameraspace; EyeDirection_tangentspace = TBN * EyeDirection_cameraspace; } Fragment shader: #version 130 // Interpolated values from the vertex shaders in vec2 UV; in vec3 Position_worldspace; in vec3 EyeDirection_cameraspace; in vec3 LightDirection_cameraspace; in vec3 LightDirection_tangentspace; in vec3 EyeDirection_tangentspace; // Ouput data out vec3 color; // Values that stay constant for the whole mesh. uniform sampler2D DiffuseTextureSampler; uniform sampler2D NormalTextureSampler; uniform sampler2D SpecularTextureSampler; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Light emission properties // You probably want to put them as uniforms vec3 LightColor = vec3(1,1,1); float LightPower = 40.0; // Material properties vec3 MaterialDiffuseColor = texture2D( DiffuseTextureSampler, vec2(UV.x,-UV.y) ).rgb; vec3 MaterialAmbientColor = vec3(0.1,0.1,0.1) * MaterialDiffuseColor; //vec3 MaterialSpecularColor = texture2D( SpecularTextureSampler, UV ).rgb * 0.3; vec3 MaterialSpecularColor = vec3(0.5,0.5,0.5); // Local normal, in tangent space. V tex coordinate is inverted because normal map is in TGA (not in DDS) for better quality vec3 TextureNormal_tangentspace = normalize(texture2D( NormalTextureSampler, vec2(UV.x,-UV.y) ).rgb*2.0 - 1.0); // Distance to the light float distance = length( LightPosition_worldspace - Position_worldspace ); // Normal of the computed fragment, in camera space vec3 n = TextureNormal_tangentspace; // Direction of the light (from the fragment to the light) vec3 l = normalize(LightDirection_tangentspace); // Cosine of the angle between the normal and the light direction, // clamped above 0 // - light is at the vertical of the triangle -> 1 // - light is perpendicular to the triangle -> 0 // - light is behind the triangle -> 0 float cosTheta = clamp( dot( n,l ), 0,1 ); // Eye vector (towards the camera) vec3 E = normalize(EyeDirection_tangentspace); // Direction in which the triangle reflects the light vec3 R = reflect(-l,n); // Cosine of the angle between the Eye vector and the Reflect vector, // clamped to 0 // - Looking into the reflection -> 1 // - Looking elsewhere -> < 1 float cosAlpha = clamp( dot( E,R ), 0,1 ); color = // Ambient : simulates indirect lighting MaterialAmbientColor + // Diffuse : "color" of the object MaterialDiffuseColor * LightColor * LightPower * cosTheta / (distance*distance) + // Specular : reflective highlight, like a mirror MaterialSpecularColor * LightColor * LightPower * pow(cosAlpha,5) / (distance*distance); //color.xyz = E; //color.xyz = LightDirection_tangentspace; //color.xyz = EyeDirection_tangentspace; } I have replaced the original color value by EyeDirection_tangentspace vector and then I got other strange effect but I can not link the image (not eunogh reputation) Is it possible that with this shaders is something wrong, or maybe in other place in my code e.g with my matrices?

  Read the article

• Looking into the JQuery Cycle Plugin

  - by nikolaosk

  I have been using JQuery for a couple of years now and it has helped me to solve many problems on the client. You can find all my posts about JQuery in this link. In this post I will be providing you with a hands-on example on the JQuery Cycle Plugin.I have been using extensively this plugin in my websites.You can rotate a series of images using various transitions with this plugin.It is a slideshow type of experience. I will be writing more posts regarding the most commonly used JQuery Plugins.  In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here.  You can download this plugin from this link I launch Expression Web 4.0 and then I type the following HTML markup (I am using HTML 5) <!DOCTYPE html><html lang="en">  <head>    <title>Liverpool Legends</title>        <meta http-equiv="Content-Type" content="text/html;charset=utf-8" >            <script type="text/javascript" src="jquery-1.8.3.min.js"> </script>     <script type="text/javascript" src="jquery.cycle.all.js"></script>              <script type="text/javascript">        $(function() {            $('#main').cycle({ fx: 'fade'});        });    </script>       </head>  <body>    <header>        <h1>Liverpool Legends</h1>    </header>        <div id="main">                   <img src="championsofeurope.jpg" alt="Champions of Europe">                        <img src="steven_gerrard.jpg" alt="Steven Gerrard">                        <img src="ynwa.jpg" alt="You will never walk alone">                       </div>            <footer>        <p>All Rights Reserved</p>      </footer>     </body>  </html> This is a very simple markup. I have added three photos (make sure you use your own when trying this example)I have added references to the JQuery library (current version is 1.8.3) and the JQuery Cycle Plugin. Then I have added 3 images in the main div element.The Javascript code that makes it all happen follows.  <script type="text/javascript">        $(function() {            $('#main').cycle({ fx: 'fade'});        });    </script>  It couldn't be any simpler than that. I view my simple in Internet Explorer 10 and it works as expected. I have this series of images transitioning one after the other using the "fade" effect. I have tested this simple solution in all major browsers and it works fine.We can have a different transition effect by changing the JS code. Have a look at the code below       <script type="text/javascript">        $(function() {            $('#main').cycle({                     fx: 'cover',        speed: 500,        timeout: 2000                        });        });    </script>   We set the speed to 500 milliseconds, that is the speed we want to have for the ‘cover’ transition.The timeout is set to two seconds which is the time the photo will show until the next transition will take place.We can customise this plugin further but this is a short introduction to the plugin.Hope it helps!!!

  Read the article

• Simplifying Human Capital Management with Mobile Applications

  - by HCM-Oracle

  By Aaron Green If you're starting to think 'mobility' is a recurring theme in your reading, you'd be right. For those who haven't started to build organisational capabilities to leverage it, it's fair to say you're late to the party. The good news: better late than never. Research firm eMarketer says the worldwide smartphone audience will total 1.75 billion this year, while communications technology and services provider Ericsson suggests smartphones will triple to 5.6 billion globally by 2019. It should be no surprise, smart phone adoption is reaching the farthest corners of the globe; the subsequent impact of enterprise applications enabled by these devices is driving business performance improvement and will continue to do so. Companies using advanced workforce analytics can add significantly to the bottom line, while impacting customer satisfaction, quality and productivity. It's a statement that makes most business leaders sit forward in their chairs. Achieving these three standards is like sipping The Golden Elixir for the business world. No-one would argue their importance. So what are 'advanced workforce analytics?' Simply, they're unprecedented access to workforce trends and performance markers. Many are made possible by a mobile world and the enterprise applications that come with it on smart devices. Some refer to it as 'the consumerisation of IT'. As this phenomenon has matured and become more widely appreciated it has impacted the spectrum of functional units within an enterprise differently, but powerfully. Whether it's sales, HR, marketing, IT, or operations, all have benefited from a more mobile approach. It has been the catalyst for improvement in, and management of, the employee experience. The net result of which is happier customers. The obvious benefits but the lesser realised impact Most people understand that mobility allows for greater efficiency and productivity, collaboration and flexibility, but how that translates into business outcomes within the various functional groups is lesser known. In actuality mobility has helped galvanise partnerships between cross-functional groups within the enterprise. Where in some quarters it was once feared mobility could fragment a workforce, its rallying cry of support is coming from what you might describe as an unlikely source - HR. As the bedrock of an enterprise, it is conceivable HR might contemplate the possible negative impact of a mobile workforce that no-longer sits in an office, at the same desks every day. After all, who would know what they were doing or saying? How would they collaborate? It's reasonable to see why HR might have a legitimate claim to try and retain as much 'perceived control' as possible. The reality however is mobility has emancipated human capital and its management. Mobility and enterprise applications are expediting decision making. Google calls it Zero Moment of Truth, or ZMOT. It enables smoother operation and can contribute to faster growth. From a collaborative perspective, with the growing use of enterprise social media, which in many cases is being driven by HR, workforce planning and the tangible impact of change is much easier to map. This in turn provides a platform from which individuals and teams can thrive. With more agility and ability to anticipate, staff satisfaction and retention is higher, and real time feedback constant. The management team can save time, energy and costs with more accurate data, which is then intelligently applied across the workforce to truly engage with staff, customers and partners. From a human capital management (HCM) perspective, mobility can help you close the loop on true talent management. It can enhance what managers can offer and what employees can provide in return. It can create nested relationships and powerful partnerships. IT and HR - partners and stewards of mobility One effect of enterprise mobility is an evolution in the nature of the relationship between HR and IT from one of service provision to partnership. The reason for the dynamic shift is largely due to the 'bring your own device' (BYOD) movement, which is transitioning to a 'bring your own application' (BYOA) scenario. As enterprise technology has in some ways reverse-engineered its solutions to help manage this situation, the partnership between IT (the functional owner) and HR (the strategic enabler) is deeply entrenched. And it has to be. The CIO and the HR leader are faced with compliance and regulatory issues and concerns around information security and personal privacy on a daily basis, complicated by global reach and varied domestic legislation. There are tens of thousands of new mobile apps entering the market each month and, unlike many consumer applications which get downloaded but are often never opened again after initial perusal, enterprise applications are being relied upon by functional groups, not least by HR to enhance people management. It requires a systematic approach across all applications in use within the enterprise in order to ensure they're used to best effect. No turning back, and no desire to With real time analytics on performance and the ability for immediate feedback, there is no turning back for managers. In my experience with Oracle, our customers' operational efficiency is at record levels. It's clear as a result of the combination of individual KPIs and organisational goals, CIOs have been able to give HR leaders the ability to build predictive models that feed into an enterprise organisations' evolving strategy. It also helps them ensure regulatory compliance much more easily. Once an arduous task, with mobile enabled automation and quality data, compliance is simpler. Their world has changed for the better. For the CIO, mobility also assists them to optimise performance. While it doesn't come without challenges, mobile-enabled applications and the native experience users have with them means employees don't need high-level technical expertise to train users. It reduces the training and engagement required from the IT team so they can focus on other things that deliver value to the bottom line; all the while lowering the cost of assets and related maintenance work by simplifying processes. Rewards of a mobile enterprise outweigh risks With mobile tools allowing us to increasingly integrate our personal and professional lives, terms like "office hours" are becoming irrelevant, so work/life balance is a cultural must. Enterprises are expected to offer tools that enable workers to access information from anywhere, at any time, from any device. Employees want simplicity and convenience but it doesn't stop at private enterprise. This is a societal shift. Governments, which traditionally have been known to be slower to adopt newer technology, are also offering support for local businesses to go mobile. Several state government websites have advice on how to create mobile apps and more. And as recently as last week the Victorian Minister for Technology Gordon Rich-Phillips unveiled his State government's ICT roadmap for the next two years, which details an increased use of the public cloud, as well as mobile communications, and improved access to online data-sets. Tech giants are investing significantly in solutions designed to simplify mobile deployment and enablement. The mobility trend is creating a wave of change in the industry and driving transformation in the enterprise. If you're not on that wave, the business risk continues to rise as your competitiveness drops. Aaron is the Vice President of HCM Strategy at Oracle Corporation where he is responsible for researching and identifying emerging trends in the practice of Human Resources and works to deliver industry-leading technology solutions. Other responsibilities include, ownership of Oracle's innovative HCM solutions across JAPAC and enabling organisations to transform and modernise their workforce tools. Follow him on Twitter @aaronjgreen

  Read the article

• GLSL: Strange light reflections

  - by Tom

  According to this tutorial I'm trying to make a normal mapping using GLSL, but something is wrong and I can't find the solution. The output render is in this image: Image1 in this image is a plane with two triangles and each of it is different illuminated (that is bad). The plane has 6 vertices. In the upper left side of this plane are 2 identical vertices (same in the lower right). Here are some vectors same for each vertice: normal vector = 0, 1, 0 (red lines on image) tangent vector = 0, 0,-1 (green lines on image) bitangent vector = -1, 0, 0 (blue lines on image) here I have one question: The two identical vertices does need to have the same tangent and bitangent? I have tried to make other values to the tangents but the effect was still similar. Here are my shaders Vertex shader: #version 130 // Input vertex data, different for all executions of this shader. in vec3 vertexPosition_modelspace; in vec2 vertexUV; in vec3 vertexNormal_modelspace; in vec3 vertexTangent_modelspace; in vec3 vertexBitangent_modelspace; // Output data ; will be interpolated for each fragment. out vec2 UV; out vec3 Position_worldspace; out vec3 EyeDirection_cameraspace; out vec3 LightDirection_cameraspace; out vec3 LightDirection_tangentspace; out vec3 EyeDirection_tangentspace; // Values that stay constant for the whole mesh. uniform mat4 MVP; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Output position of the vertex, in clip space : MVP * position gl_Position = MVP * vec4(vertexPosition_modelspace,1); // Position of the vertex, in worldspace : M * position Position_worldspace = (M * vec4(vertexPosition_modelspace,1)).xyz; // Vector that goes from the vertex to the camera, in camera space. // In camera space, the camera is at the origin (0,0,0). vec3 vertexPosition_cameraspace = ( V * M * vec4(vertexPosition_modelspace,1)).xyz; EyeDirection_cameraspace = vec3(0,0,0) - vertexPosition_cameraspace; // Vector that goes from the vertex to the light, in camera space. M is ommited because it's identity. vec3 LightPosition_cameraspace = ( V * vec4(LightPosition_worldspace,1)).xyz; LightDirection_cameraspace = LightPosition_cameraspace + EyeDirection_cameraspace; // UV of the vertex. No special space for this one. UV = vertexUV; // model to camera = ModelView vec3 vertexTangent_cameraspace = MV3x3 * vertexTangent_modelspace; vec3 vertexBitangent_cameraspace = MV3x3 * vertexBitangent_modelspace; vec3 vertexNormal_cameraspace = MV3x3 * vertexNormal_modelspace; mat3 TBN = transpose(mat3( vertexTangent_cameraspace, vertexBitangent_cameraspace, vertexNormal_cameraspace )); // You can use dot products instead of building this matrix and transposing it. See References for details. LightDirection_tangentspace = TBN * LightDirection_cameraspace; EyeDirection_tangentspace = TBN * EyeDirection_cameraspace; } Fragment shader: #version 130 // Interpolated values from the vertex shaders in vec2 UV; in vec3 Position_worldspace; in vec3 EyeDirection_cameraspace; in vec3 LightDirection_cameraspace; in vec3 LightDirection_tangentspace; in vec3 EyeDirection_tangentspace; // Ouput data out vec3 color; // Values that stay constant for the whole mesh. uniform sampler2D DiffuseTextureSampler; uniform sampler2D NormalTextureSampler; uniform sampler2D SpecularTextureSampler; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Light emission properties // You probably want to put them as uniforms vec3 LightColor = vec3(1,1,1); float LightPower = 40.0; // Material properties vec3 MaterialDiffuseColor = texture2D( DiffuseTextureSampler, vec2(UV.x,-UV.y) ).rgb; vec3 MaterialAmbientColor = vec3(0.1,0.1,0.1) * MaterialDiffuseColor; //vec3 MaterialSpecularColor = texture2D( SpecularTextureSampler, UV ).rgb * 0.3; vec3 MaterialSpecularColor = vec3(0.5,0.5,0.5); // Local normal, in tangent space. V tex coordinate is inverted because normal map is in TGA (not in DDS) for better quality vec3 TextureNormal_tangentspace = normalize(texture2D( NormalTextureSampler, vec2(UV.x,-UV.y) ).rgb*2.0 - 1.0); // Distance to the light float distance = length( LightPosition_worldspace - Position_worldspace ); // Normal of the computed fragment, in camera space vec3 n = TextureNormal_tangentspace; // Direction of the light (from the fragment to the light) vec3 l = normalize(LightDirection_tangentspace); // Cosine of the angle between the normal and the light direction, // clamped above 0 // - light is at the vertical of the triangle -> 1 // - light is perpendicular to the triangle -> 0 // - light is behind the triangle -> 0 float cosTheta = clamp( dot( n,l ), 0,1 ); // Eye vector (towards the camera) vec3 E = normalize(EyeDirection_tangentspace); // Direction in which the triangle reflects the light vec3 R = reflect(-l,n); // Cosine of the angle between the Eye vector and the Reflect vector, // clamped to 0 // - Looking into the reflection -> 1 // - Looking elsewhere -> < 1 float cosAlpha = clamp( dot( E,R ), 0,1 ); color = // Ambient : simulates indirect lighting MaterialAmbientColor + // Diffuse : "color" of the object MaterialDiffuseColor * LightColor * LightPower * cosTheta / (distance*distance) + // Specular : reflective highlight, like a mirror MaterialSpecularColor * LightColor * LightPower * pow(cosAlpha,5) / (distance*distance); //color.xyz = E; //color.xyz = LightDirection_tangentspace; //color.xyz = EyeDirection_tangentspace; } I have replaced the original color value by EyeDirection_tangentspace vector and then I got other strange effect but I can not link the image (not eunogh reputation) Is it possible that with this shaders is something wrong, or maybe in other place in my code e.g with my matrices? SOLVED Solved... 3 days needed for changing one letter from this: glBindBuffer(GL_ARRAY_BUFFER, vbo); glVertexAttribPointer ( 4, // attribute 3, // size GL_FLOAT, // type GL_FALSE, // normalized? sizeof(VboVertex), // stride (void*)(12*sizeof(float)) // array buffer offset ); to this: glBindBuffer(GL_ARRAY_BUFFER, vbo); glVertexAttribPointer ( 4, // attribute 3, // size GL_FLOAT, // type GL_FALSE, // normalized? sizeof(VboVertex), // stride (void*)(11*sizeof(float)) // array buffer offset ); see difference? :)

  Read the article

• Why doesn't this code work correctly?

  - by MisterSir

  I'm working on a website that displays galleries, using jCarousel. But no matter what I try, I can't get it to work, and I need to finish this by today. I have a very urgent schedule. My code basically takes image URLs from a database and sends them to AJAX, which passes it to jCarousel which makes the gallery. But there are a few problems: It doesn't display correctly! I can only get the last item pulled from the database, and it displays on the bottom-most row. After the item pulled from the database is displayed, the first time I click on "prev" there's no scroll effect, and the item just disappears! Only if I click on "next" 2-3 times there's a scroll effect and the item remains visible. My items are always displayed at the end of the carousel! This is urgent.. Please help me fix this. about.html: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-us"> <head> <script type="text/javascript" src="jquery-1.4.4.min.js"></script> <script type="text/javascript" src="/lib/jquery.jcarousel.min.js"></script> <link rel="stylesheet" type="text/css" href="/skins/tango/skin.css" /> <!--<style type="text/css"> #wrapper { width: 700px; margin-left: auto; margin-right: auto; } #carousel { margin-top: 120px; padding-left: 120px; } #side { padding-left: 550px; position: absolute; padding-top: 120px; } #hidden { color: #FFFFFF; } </style>--> <script type="text/javascript"> jQuery.easing['BounceEaseOut'] = function(p, t, b, c, d) { if ((t/=d) < (1/2.75)) { return c*(7.5625*t*t) + b; } else if (t < (2/2.75)) { return c*(7.5625*(t-=(1.5/2.75))*t + .75) + b; } else if (t < (2.5/2.75)) { return c*(7.5625*(t-=(2.25/2.75))*t + .9375) + b; } else { return c*(7.5625*(t-=(2.625/2.75))*t + .984375) + b; } }; function mycarousel_initCallback(carousel) { jQuery('#mycarousel-next').bind('click', function() { carousel.next(); return false; }); jQuery('#mycarousel-prev').bind('click', function() { carousel.prev(); return false; }); }; jQuery(document).ready(function() { jQuery('#mycarousel').jcarousel({ easing: 'BounceEaseOut', wrap: "first", initCallback: mycarousel_initCallback, animation: 1000, scroll: 3, visible: 3, buttonNextHTML: null, buttonPrevHTML: null }); jQuery('#mycarousel2').jcarousel({ easing: 'BounceEaseOut', animation: 1000, wrap: "first", initCallback: mycarousel_initCallback, scroll: 3, visible: 3, buttonNextHTML: null, buttonPrevHTML: null }); jQuery('#mycarousel3').jcarousel({ easing: 'BounceEaseOut', animation: 1000, scroll: 3, wrap: "first", initCallback: mycarousel_initCallback, visible: 3, buttonNextHTML: null, buttonPrevHTML: null }); }); var prevButton = null; function getObject(b, el) { var currbutton = b; var http; var url = "about.php"; var parameters = "d=carousel&cat=" + currbutton; try { http = new XMLHttpRequest(); } catch(e) { try { http = new ActiveXObject("Msxml2.XMLHTTP"); } catch(e) { http = new ActiveXObject("Microsoft.XMLHTTP"); } } function getServer() { if (http.readyState == 4) { var i = 0; var liArr = http.responseText; var built = liArr.split(", "); var li = document.createElement("li"); var ul1 = document.getElementById("mycarousel"); var ul2 = document.getElementById("mycarousel2"); var ul3 = document.getElementById("mycarousel3"); if (el != prevButton) { prevButton = el; while (ul1.hasChildNodes() ) {ul1.removeChild(ul1.lastChild);} while (ul2.hasChildNodes() ) {ul2.removeChild(ul2.lastChild);} while (ul3.hasChildNodes() ) {ul3.removeChild(ul3.lastChild);} } else return 0; while (i < (built.length) / 3) { li.innerHTML = built[i]; ul1.appendChild(li); i++; } while (i < ((built.length) / 3)*2) { li.innerHTML = built[i]; ul2.appendChild(li); i++; } while (i < (built.length)) { li.innerHTML = built[i]; ul3.appendChild(li); i++; } } } http.open("POST", url, true); http.setRequestHeader("Content-type", "application/x-www-form-urlencoded"); http.setRequestHeader("Content-length", parameters.length); http.setRequestHeader("Connection", "close"); http.onreadystatechange = getServer; http.send(parameters); } </script> </head> <body> <span id="hidden"> </span> <div id="wrapper"> <div id="side"> <form name="cats"> <input type="button" value="Hats" onclick="getObject('hats', this);"/><br /> <input type="button" value="Pants" onclick="getObject('pants', this);"/><br /> <input type="button" value="Shirts" onclick="getObject('shirts', this);"/><br /> </form> </div> <div id="carousel"> <ul id="mycarousel" class="jcarousel-skin-tango"> </ul> <ul id="mycarousel2" class="jcarousel-skin-tango"> </ul> <ul id="mycarousel3" class="jcarousel-skin-tango"> </ul> <input type="button" id="mycarousel-prev" value="prev" /> <input type="button" id="mycarousel-next" value="next" /> </div> </div> </body> </html> I commented the CSS because I thought it was giving me trouble, but honestly I have no idea what the hell's going on with jCarousel. about.php: <?php echo "<img width='75' height='75' src='http://static.flickr.com/66/199481236_dc98b5abb3_s.jpg' />, hi, hi, hi, hi, hi, hi, hi, hi"; ?> Also, even if there are no other items than what is displayed, I'm still able to scroll back, but not forward, assumingly because my item is always placed at the end of the carousel. I know it looks like a lot of code but it's really not! My formatting takes a lot of lines, the commented CSS takes a lot, and a lot of the code is HTML and jCarousel configuration, and there's also the BounceEasing effect which takes a few lines. There's not much actual code! So as I said, this is urgent and I need this fixed. But I can't get it to work. Please help me! Thanks for your time! EDIT: I changed the code a bit, but it still does not work. I really need help on this one!! EDIT: I added document.createElement("li"); to each while loop. Now all my items are displayed, but they are displayed vertically and not horizontally on each row. Other than that all other problems are the same. EDIT: Oh and also, in the row my image displays, only the image is there. Maybe jCarousel doesn't accept img and text, I don't know.

  Read the article

• Stretch VMWare Player guest OS to fullscreen

  - by Synetech

  I’m using VMWare Player to play an old 16-bit Windows game. Unfortunately the game uses only 640x480 and I cannot figure out how to stretch the VM window to full-screen on the host. I set the guest OS to 640x480, but the screen is still small, in the middle of the screen as seen in figure 1. I even tried setting the compatibility mode to Windows 95 and 640x480, but it has no effect (figure 2) and looks exactly the same as when I set the VM to full-screen (1366x768 on the laptop) and start the game normally. There are few references to stretching a VM. One page mentions setting a Stretch Guest option, but there is no such option, at least not in VMWare Player 4.0.3. I know that VirtualBox has a stretching option, but I’m trying to find a solution for VMWare (Player, not Workstation). Figure 1: Guest OS is pillar-boxed Figure 2: Using compatibility mode

  Read the article

• openVPN GUI does not run error about error opening registry for reading HKLM\SOFTWARE\OpenVPN

  - by Coder

  I'm trying to run OpenVPN as a portable application and to that effect i have installed it on a Windows 7 machine, copied the files to another windows 7 machine and manually restored the registry settings using a .reg file. Whenever i try to run open vpn GUI i get the following error error opening registry for reading HKLM\SOFTWARE\OpenVPN I have verified that the key mentioned is indeed in the registry at the correct location with the correct values yet the GUI still complains. I have tried running the gui as an administrator (i'm logged in as an administrator) and also the compatibility modes but none helped. I have also tried openVPN portable "OpenVPNPortable_1.6.6.paf.exe" and it has the same problem. Can anybody help me with this issue?

  Read the article

• Outlook 2007 unable to connect to exchange server

  - by mattwarren

  I came into the office a week ago and outlook has refused to connect ever since, it just says "Disconnected" in the bottom right-hand corner. I've tried restarting it, rebooting Windows etc. I'm the only one if our office who is having this problem, so it's not a general problem with the server. Things I've tried Pinging the server via IP address and host name, both work fine Connecting via OWA, this works using the same machine name Connecting to Exchange via HTTP ("Outlook Anywhere") doesn't work None of the suggestions in this question helped, http://serverfault.com/questions/21755/can-ping-exchange-server-cant-connect-outlook-to-it Disabling Windows firewall on my laptop also has no effect. There are no items in the event viewer that indicate that anything it up. Also no permissions have changed on the server since when it worked. What else can I do to diagnose this, any suggestions?

  Read the article

• Continual "The Windows Filtering Platform has blocked a connection" errors?

  - by Richard

  Our systems have been compromised by something recently which has lead us to carry out a more detailed look at what is happening on our workstations. I have noticed an issue where the Security log of this Windows 7 workstation is continually logging a security "Audit Failure" where the detail is that "The Windows Filtering Platform has blocked a connection". This is happening thousands of times a day and would appear to be our BT Business Broadband HGV 2700 ADSL router attempting to connect to Port 137 (NET Bios) on my workstation and being blocked. This has unfortunately had the effect of filling up the log files so much that anything which might have been of use which was logged over the weekend to help debug the intrusion has been "overwritten off the end" of the Security log. (I've since increased the log file size limits massively and turned on archiving). Does anyone know if this is standard behaviour of a BT ADSL router or whether this indicates that the router is compromised in some way or malfunctioning, or have any further suggestions as to how to diagnose this problem?

  Read the article

• Exchange 2010 periodically stops responding to SMTP events with error 421 4.4.1 Connection timed out

  - by Michael Shimmins

  After some help diagnosing why Exchange 2010 Enterprise stops responding to SMTP events. I can't find a pattern to it. It doesn't appear to be an actual timeout, as the server responds immediately with the error. To reproduce it I telnet into the server on port 25 and issue a EHLO. The server immediately replies with the 421: 421 4.4.1 Connection timed out Once this starts happening I've found restarting the exchange box is the only reliable way to get it flowing again. Sometimes restarting the Transport service or the mailbox attendant service seems to fix it, but this could be coincidental as it often has no effect.

  Read the article

• Windows 7: how to let AutoConfigURL change be effective immediately?

  - by Jeroen Pluimers

  I want to set both the script and the "Use automatic configuration script" checkbox in Windows 7 using a script that immediately affects anything using wininet.dll (Internet Explorer, Chrome, .NET apps, etc). I've done a before/after registry diff, and tried doing this through the registry, but things like the reg files below require the apps to be restarted. Chaning the settings by pressing the "LAN Settings" button through this Control panel shortcut has immediate affect: %windir%\system32\control.exe Inetcpl.cpl,,4 How can I script this immediate effect? These are the registry script files: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings] “AutoConfigURL”=”http://www.company.com/proxy.pac” (registry scripts borrowed from http://danny.quantumspark.net/wordpress/) [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings] “AutoConfigURL”=- --jeroen (who is checking out the notify function at superuser.com)

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >