Search Results

Search found 4049 results on 162 pages for 'serial communication'.

Page 91/162 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• openvpn WARNING: No server certificate verification method has been enabled

  - by tmedtcom

  I tried to install openvpn on debian squeez (server) and connect from my fedora 17 as (client). Here is my configuration: server configuration ###cat server.conf # Serveur TCP ** proto tcp** port 1194 dev tun # Cles et certificats ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem # Reseau #Adresse virtuel du reseau vpn server 192.170.70.0 255.255.255.0 #Cette ligne ajoute sur le client la route du reseau vers le serveur push "route 192.168.1.0 255.255.255.0" #Creer une route du server vers l'interface tun. #route 192.170.70.0 255.255.255.0 # Securite keepalive 10 120 #type d'encryptage des données **cipher AES-128-CBC** #activation de la compression comp-lzo #nombre maximum de clients autorisés max-clients 10 #pas d'utilisateur et groupe particuliers pour l'utilisation du VPN user nobody group nogroup #pour rendre la connexion persistante persist-key persist-tun #Log d'etat d'OpenVPN status /var/log/openvpn-status.log #logs openvpnlog /var/log/openvpn.log log-append /var/log/openvpn.log #niveau de verbosité verb 5 ###cat client.conf # Client client dev tun [COLOR="Red"]proto tcp-client[/COLOR] remote <my server wan IP> 1194 resolv-retry infinite **cipher AES-128-CBC** # Cles ca ca.crt cert client.crt key client.key # Securite nobind persist-key persist-tun comp-lzo verb 3 Message from the host client (fedora 17) in the log file / var / log / messages: Dec 6 21:56:00 GlobalTIC NetworkManager[691]: <info> Starting VPN service 'openvpn'... Dec 6 21:56:00 GlobalTIC NetworkManager[691]: <info> VPN service 'openvpn' started (org.freedesktop.NetworkManager.openvpn), PID 7470 Dec 6 21:56:00 GlobalTIC NetworkManager[691]: <info> VPN service 'openvpn' appeared; activating connections Dec 6 21:56:00 GlobalTIC NetworkManager[691]: <info> VPN plugin state changed: starting (3) Dec 6 21:56:01 GlobalTIC NetworkManager[691]: <info> VPN connection 'Connexion VPN 1' (Connect) reply received. Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]: OpenVPN 2.2.2 x86_64-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] built on Sep 5 2012 Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]:[COLOR="Red"][U][B] WARNING: No server certificate verification method has been enabled.[/B][/U][/COLOR] See http://openvpn.net/howto.html#mitm for more info. Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]:[COLOR="Red"] WARNING: file '/home/login/client/client.key' is group or others accessible[/COLOR] Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]: UDPv4 link local: [undef] Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]: UDPv4 link remote: [COLOR="Red"]<my server wan IP>[/COLOR]:1194 Dec 6 21:56:01 GlobalTIC nm-openvpn[7472]: [COLOR="Red"]read UDPv4 [ECONNREFUSED]: Connection refused (code=111)[/COLOR] Dec 6 21:56:03 GlobalTIC nm-openvpn[7472]: [COLOR="Red"]read UDPv4[/COLOR] [ECONNREFUSED]: Connection refused (code=111) Dec 6 21:56:07 GlobalTIC nm-openvpn[7472]: read UDPv4 [ECONNREFUSED]: Connection refused (code=111) Dec 6 21:56:15 GlobalTIC nm-openvpn[7472]: read UDPv4 [ECONNREFUSED]: Connection refused (code=111) Dec 6 21:56:31 GlobalTIC nm-openvpn[7472]: read UDPv4 [ECONNREFUSED]: Connection refused (code=111) Dec 6 21:56:41 GlobalTIC NetworkManager[691]: <warn> VPN connection 'Connexion VPN 1' (IP Conf[/CODE] ifconfig on server host(debian): ifconfig eth0 Link encap:Ethernet HWaddr 08:00:27:16:21:ac inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe16:21ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9059 errors:0 dropped:0 overruns:0 frame:0 TX packets:5660 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:919427 (897.8 KiB) TX bytes:1273891 (1.2 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.170.70.1 P-t-P:192.170.70.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on the client host (fedora 17) as0t0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 5.5.0.1 netmask 255.255.252.0 destination 5.5.0.1 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 200 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2 bytes 321 (321.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 as0t1: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 5.5.4.1 netmask 255.255.252.0 destination 5.5.4.1 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 200 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2 bytes 321 (321.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 as0t2: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 5.5.8.1 netmask 255.255.252.0 destination 5.5.8.1 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 200 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2 bytes 321 (321.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 as0t3: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 5.5.12.1 netmask 255.255.252.0 destination 5.5.12.1 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 200 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2 bytes 321 (321.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 **p255p1**: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::21d:baff:fe20:b7e6 prefixlen 64 scopeid 0x20<link> ether 00:1d:ba:20:b7:e6 txqueuelen 1000 (Ethernet) RX packets 4842070 bytes 3579798184 (3.3 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3996158 bytes 2436442882 (2.2 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 16 p255p1 is label for eth0 interface and on the server : root@hoteserver:/etc/openvpn# tree . +-- client ¦** +-- ca.crt ¦** +-- client.conf ¦** +-- client.crt ¦** +-- client.csr ¦** +-- client.key ¦** +-- client.ovpn ¦* ¦** +-- easy-rsa ¦** +-- build-ca ¦** +-- build-dh ¦** +-- build-inter ¦** +-- build-key ¦** +-- build-key-pass ¦** +-- build-key-pkcs12 ¦** +-- build-key-server ¦** +-- build-req ¦** +-- build-req-pass ¦** +-- clean-all ¦** +-- inherit-inter ¦** +-- keys ¦** ¦** +-- 01.pem ¦** ¦** +-- 02.pem ¦** ¦** +-- ca.crt ¦** ¦** +-- ca.key ¦** ¦** +-- client.crt ¦** ¦** +-- client.csr ¦** ¦** +-- client.key ¦** ¦** +-- dh1024.pem ¦** ¦** +-- index.txt ¦** ¦** +-- index.txt.attr ¦** ¦** +-- index.txt.attr.old ¦** ¦** +-- index.txt.old ¦** ¦** +-- serial ¦** ¦** +-- serial.old ¦** ¦** +-- server.crt ¦** ¦** +-- server.csr ¦** ¦** +-- server.key ¦** +-- list-crl ¦** +-- Makefile ¦** +-- openssl-0.9.6.cnf.gz ¦** +-- openssl.cnf ¦** +-- pkitool ¦** +-- README.gz ¦** +-- revoke-full ¦** +-- sign-req ¦** +-- vars ¦** +-- whichopensslcnf +-- openvpn.log +-- openvpn-status.log +-- server.conf +-- update-resolv-conf on the client: [login@hoteclient openvpn]$ tree . |-- easy-rsa | |-- 1.0 | | |-- build-ca | | |-- build-dh | | |-- build-inter | | |-- build-key | | |-- build-key-pass | | |-- build-key-pkcs12 | | |-- build-key-server | | |-- build-req | | |-- build-req-pass | | |-- clean-all | | |-- list-crl | | |-- make-crl | | |-- openssl.cnf | | |-- README | | |-- revoke-crt | | |-- revoke-full | | |-- sign-req | | `-- vars | `-- 2.0 | |-- build-ca | |-- build-dh | |-- build-inter | |-- build-key | |-- build-key-pass | |-- build-key-pkcs12 | |-- build-key-server | |-- build-req | |-- build-req-pass | |-- clean-all | |-- inherit-inter | |-- keys [error opening dir] | |-- list-crl | |-- Makefile | |-- openssl-0.9.6.cnf | |-- openssl-0.9.8.cnf | |-- openssl-1.0.0.cnf | |-- pkitool | |-- README | |-- revoke-full | |-- sign-req | |-- vars | `-- whichopensslcnf |-- keys -> ./easy-rsa/2.0/keys/ `-- server.conf the problem source is cipher AES-128-CBC ,proto tcp-client or UDP or the interface p255p1 on fedora17 or file authentification ta.key is not found ????

  Read the article

• Google Talk Chat/Conference Solutions

  - by Adam Davis

  I started using the old confbot python conference script in 2005 for my family. This essentially implements an IRC like conference room over Google Talk (or any Jabber/XMPP server). It has significantly increased family communication, and has become rather indispensable due to this. Recently it's begun to have severe problems (people can't see each other in the conference room) which has nearly killed the usefulness of it. Before I develop my own software or debug confbot (probably not - it uses an older jabber library that hasn't been updated since 2003) I wanted to see what other solutions exist that meet our needs: Supports Google Talk (Sorry, I'm not going to try to convince everyone involved to move to a new IM or other client) Free and open source (ideal, but not required) Runs on Windows (Not a web service run by someone else) Implements basic functionality such as kick/ban, emotes Remembers who joined the conference room across restarts Obeys Do Not Disturb and Busy status Archives all activity -Adam

  Read the article

• Root certificate authority works windows/linux but not mac osx - (malformed)

  - by AKwhat

  I have created a self-signed root certificate authority which if I install onto windows, linux, or even using the certificate store in firefox (windows/linux/macosx) will work perfectly with my terminating proxy. I have installed it into the system keychain and I have set the certificate to always trust. Within the chrome browser details it says "The certificate that Chrome received during this connection attempt is not formatted correctly, so Chrome cannot use it to protect your information. Error type: Malformed certificate" I used this code to create the certificate: openssl genrsa -des3 -passout pass:***** -out private/server.key 4096 openssl req -batch -passin pass:***** -new -x509 -nodes -sha1 -days 3600 -key private/server.key -out server.crt -config ../openssl.cnf If the issue is NOT that it is malformed (because it works everywhere else) then what else could it be? Am I installing it incorrectly? To be clear: Within the windows/linux OS, all browsers work perfectly. Within mac only firefox works if it uses its internal certificate store and not the keychain. It's the keychain method of importing a certificate that causes the issue. Thus, all browsers using the keychain will not work. Root CA Cert: -----BEGIN CERTIFICATE----- **some base64 stuff** -----END CERTIFICATE----- Intermediate CA Cert: Certificate: Data: Version: 3 (0x2) Serial Number: 1 (0x1) Signature Algorithm: sha1WithRSAEncryption Issuer: C=*****, ST=*******, L=******, O=*******, CN=******/emailAddress=****** Validity Not Before: May 21 13:57:32 2014 GMT Not After : Jun 20 13:57:32 2014 GMT Subject: C=*****, ST=********, O=*******, CN=*******/emailAddress=******* Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (4096 bit) Modulus (4096 bit): 00:e7:2d:75:38:23:02:8e:b9:8d:2f:33:4c:2a:11: 6d:d4:f8:29:ab:f3:fc:12:00:0f:bb:34:ec:35:ed: a5:38:10:1e:f3:54:c2:69:ae:3b:22:c0:0d:00:97: 08:da:b9:c9:32:c0:c6:b1:8b:22:7e:53:ea:69:e2: 6d:0f:bd:f5:96:b2:d0:0d:b2:db:07:ba:f1:ce:53: 8a:5e:e0:22:ce:3e:36:ed:51:63:21:e7:45:ad:f9: 4d:9b:8f:7f:33:4c:ed:fc:a6:ac:16:70:f5:96:36: 37:c8:65:47:d1:d3:12:70:3e:8d:2f:fb:9f:94:e0: c9:5f:d0:8c:30:e0:04:23:38:22:e5:d9:84:15:b8: 31:e7:a7:28:51:b8:7f:01:49:fb:88:e9:6c:93:0e: 63:eb:66:2b:b4:a0:f0:31:33:8b:b4:04:84:1f:9e: d5:ed:23:cc:bf:9b:8e:be:9a:5c:03:d6:4f:1a:6f: 2d:8f:47:60:6c:89:c5:f0:06:df:ac:cb:26:f8:1a: 48:52:5e:51:a0:47:6a:30:e8:bc:88:8b:fd:bb:6b: c9:03:db:c2:46:86:c0:c5:a5:45:5b:a9:a3:61:35: 37:e9:fc:a1:7b:ae:71:3a:5c:9c:52:84:dd:b2:86: b3:2e:2e:7a:5b:e1:40:34:4a:46:f0:f8:43:26:58: 30:87:f9:c6:c9:bc:b4:73:8b:fc:08:13:33:cc:d0: b7:8a:31:e9:38:a3:a9:cc:01:e2:d4:c2:a5:c1:55: 52:72:52:2b:06:a3:36:30:0c:5c:29:1a:dd:14:93: 2b:9d:bf:ac:c1:2d:cd:3f:89:1f:bc:ad:a4:f2:bd: 81:77:a9:f4:f0:b9:50:9e:fb:f5:da:ee:4e:b7:66: e5:ab:d1:00:74:29:6f:01:28:32:ea:7d:3f:b3:d7: 97:f2:60:63:41:0f:30:6a:aa:74:f4:63:4f:26:7b: 71:ed:57:f1:d4:99:72:61:f4:69:ad:31:82:76:67: 21:e1:32:2f:e8:46:d3:28:61:b1:10:df:4c:02:e5: d3:cc:22:30:a4:bb:81:10:dc:7d:49:94:b2:02:2d: 96:7f:e5:61:fa:6b:bd:22:21:55:97:82:18:4e:b5: a0:67:2b:57:93:1c:ef:e5:d2:fb:52:79:95:13:11: 20:06:8c:fb:e7:0b:fd:96:08:eb:17:e6:5b:b5:a0: 8d:dd:22:63:99:af:ad:ce:8c:76:14:9a:31:55:d7: 95:ea:ff:10:6f:7c:9c:21:00:5e:be:df:b0:87:75: 5d:a6:87:ca:18:94:e7:6a:15:fe:27:dd:28:5e:c0: ad:d2:91:d3:2d:8e:c3:c0:9f:fb:ff:c0:36:7e:e2: d7:bc:41 Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Subject Alternative Name: DNS:localhost, DNS:dropbox.com, DNS:*.dropbox.com, DNS:filedropper.com, DNS:*.filedropper.com X509v3 Subject Key Identifier: F3:E5:38:5B:3C:AF:1C:73:C1:4C:7D:8B:C8:A1:03:82:65:0D:FF:45 X509v3 Authority Key Identifier: keyid:2B:37:39:7B:9F:45:14:FE:F8:BC:CA:E0:6E:B4:5F:D6:1A:2B:D7:B0 DirName:/C=****/ST=******/L=*******/O=*******/CN=******/emailAddress=******* serial:EE:8C:A3:B4:40:90:B0:62 X509v3 Basic Constraints: CA:TRUE Signature Algorithm: sha1WithRSAEncryption 46:2a:2c:e0:66:e3:fa:c6:80:b6:81:e7:db:c3:29:ab:e7:1c: f0:d9:a0:b7:a9:57:8c:81:3e:30:8f:7d:ef:f7:ed:3c:5f:1e: a5:f6:ae:09:ab:5e:63:b4:f6:d6:b6:ac:1c:a0:ec:10:19:ce: dd:5a:62:06:b4:88:5a:57:26:81:8e:38:b9:0f:26:cd:d9:36: 83:52:ec:df:f4:63:ce:a1:ba:d4:1c:ec:b6:66:ed:f0:32:0e: 25:87:79:fa:95:ee:0f:a0:c6:2d:8f:e9:fb:11:de:cf:26:fa: 59:fa:bd:0b:74:76:a6:5d:41:0d:cd:35:4e:ca:80:58:2a:a8: 5d:e4:d8:cf:ef:92:8d:52:f9:f2:bf:65:50:da:a8:10:1b:5e: 50:a7:7e:57:7b:94:7f:5c:74:2e:80:ae:1e:24:5f:0b:7b:7e: 19:b6:b5:bd:9d:46:5a:e8:47:43:aa:51:b3:4b:3f:12:df:7f: ef:65:21:85:c2:f6:83:84:d0:8d:8b:d9:6d:a8:f9:11:d4:65: 7d:8f:28:22:3c:34:bb:99:4e:14:89:45:a4:62:ed:52:b1:64: 9a:fd:08:cd:ff:ca:9e:3b:51:81:33:e6:37:aa:cb:76:01:90: d1:39:6f:6a:8b:2d:f5:07:f8:f4:2a:ce:01:37:ba:4b:7f:d4: 62:d7:d6:66:b8:78:ad:0b:23:b6:2e:b0:9a:fc:0f:8c:4c:29: 86:a0:bc:33:71:e5:7f:aa:3e:0e:ca:02:e1:f6:88:f0:ff:a2: 04:5a:f5:d7:fe:7d:49:0a:d2:63:9c:24:ed:02:c7:4d:63:e6: 0c:e1:04:cd:a4:bf:a8:31:d3:10:db:b4:71:48:f7:1a:1b:d9: eb:a7:2e:26:00:38:bd:a8:96:b4:83:09:c9:3d:79:90:e1:61: 2c:fc:a0:2c:6b:7d:46:a8:d7:17:7f:ae:60:79:c1:b6:5c:f9: 3c:84:64:7b:7f:db:e9:f1:55:04:6e:b5:d3:5e:d3:e3:13:29: 3f:0b:03:f2:d7:a8:30:02:e1:12:f4:ae:61:6f:f5:4b:e9:ed: 1d:33:af:cd:9b:43:42:35:1a:d4:f6:b9:fb:bf:c9:8d:6c:30: 25:33:43:49:32:43:a5:a8:d8:82:ef:b0:a6:bd:8b:fb:b6:ed: 72:fd:9a:8f:00:3b:97:a3:35:a4:ad:26:2f:a9:7d:74:08:82: 26:71:40:f9:9b:01:14:2e:82:fb:2f:c0:11:51:00:51:07:f9: e1:f6:1f:13:6e:03:ee:d7:85:c2:64:ce:54:3f:15:d4:d7:92: 5f:87:aa:1e:b4:df:51:77:12:04:d2:a5:59:b3:26:87:79:ce: ee:be:60:4e:87:20:5c:7f -----BEGIN CERTIFICATE----- **some base64 stuff** -----END CERTIFICATE-----

  Read the article

• Dedicated NIC or dedicated port for iSCSI?

  - by Newt

  When spec'ing and configuring a machine that will utilise shared iSCSI storage, I've read a lot of documentation which suggests a dedicated network adapter should be used for iSCSI communication. That makes a lot of sense and I have no problem with it. The question I do have, is this - should that suggestion be taken to mean that a separate physical NIC should be used, or will a dedicated port/ports on a dual/quad port NIC be just as good? My suspicion is that simply using dedicated port(s) on a shared NIC would be just as good. Any input greatly appreciated.

  Read the article

• OpenVPN performance: how many concurrent clients are possible?

  - by Steffen Müller

  I am evaluating a system for a client where many OpenVPN clients connect to a OpenVPN server. "Many" means 50000 - 1000000. Why do I do that? The clients are distributed embedded systems, each sitting behind the system owners dsl router. The server needs to be able to send commands to the clients. My first naive approach is to make the clients connect to the server via an openvpn network. This way, the secure communication tunnel can be used in both directions. This means that all clients are always connected to the server. There are many clients summing up over the years. The question is: does the OpenVPN server explode when reaching a certain number of clients? I am already aware of a maximum TCP connection number limit, therefore (and for other reasons) the VPN would have to use UDP transport. OpenVPN gurus, what is your opinion?

  Read the article

• Load balancing and HTTPS strategies

  - by Dan

  I am faced with the following problem: Servers get saturated since current load balancing strategy is based on client IP. Some corporate clients access our servers from behind large proxies so all clients appear with same IP to our load balancer. I think we are using some hardware load balancing device (can investigate further if necessary). We need to maintain session affinity (site is constructed in ASP), so all requests with same IP get routed to the same node. Since all the communication goes over the HTTPS, no request data (like session Id) is available to balancer as a client discriminator. Is there a way to use some other data besides the IP to distinguish between clients and route the clients even when coming from same IP to different nodes? Note: I need to maintain the traffic between the balancer and nodes safe (encrypted).

  Read the article

• WinXP How to Tunnel LPT over USB

  - by Michael Pruitt

  I have a windows program that accesses a device connected to a LPT (1-3) 25 pin port. The communication is bidirectional, and I suspected the control lines are also accessed directly. I would like to migrate the device to a machine that does not have a LPT port. I saw the dos2usb software, but that takes the output (from a DOS program) and 'prints' it formatted for a specific printer. I need a raw LPT connection, and a cable that provides access to all the control signals. I do have a USB to 36-pin Centronics that may have the extra signals. I use it with a vinyl cutter that doesn't like most of the USB dongles. It comes up as USB001. Would adding and sharing a generic printer, then mapping LPT1 to the share get me closer? Would that work for a parallel port scanner? My preferred solution is a USB cable with a driver that will map it to LPT1, LPT2, or LPT3.

  Read the article

• Assigning static IP and domain name mapping to local server in LAN

  - by yashbinani

  I have developed a web application which will be deployed in a LAN environemnt. Clients will be Computers/Android Tablets/IPAD In order for communication between client and local server 1) need to assign a static IP to local server. 2) need a domian name mapping for that IP address in Local environment. 3) router should assign the same static IP if it gets restarted etc. I am using a windows XP machine as Local server OS. Do i need to take care of router configurations before buying one, or all routers will have same capability to perform this task. I am not a network specialist, so Sorry if this question sounds stupid. Thanks

  Read the article

• Website Upgrade - Avoid Downtime

  - by nolan.sipos

  I have been requested to investigate how I can reduce the downtime of our website upgrades. We maintain a DNN site with both public facing pages and member only pages. The member only pages are directly linked to our core application database while the public pages are not. Our current process is to redirect website users as soon as the upgrade process begins, which includes Backup of the Prod DB Update Prod DB Update Executables (Application) Upgrade Website Application (If this requires an update) Install Dependencies Upgrade sub systems like communication engine and payment broker Update various configuration files Perform testing of systems Restart all services Allow access to site This process can take from 2 to 8 hours depending on upgrade required, scripts to be run, size of database and number or portals. My initial thoughts are to restrict users to read only pages and any update pages would be unavailable. Could anyone please offer suggestions as to the best practices for what I would think to be a common problem so that we can reduce this down time and if we need infrastructure changes, I can put this to our technical department.

  Read the article

• Seperator in dock in osx

  - by sagar

  I have placed too many icons in my dock. there is by default a separator in dock between applications & trash. I want to add more separators in my dock - for grouping purpose. say for example finder, preview, itunes, system pref.,activity monitor FOR Mac osx group Mozilla, safari - for Browsing group Odesk, skype, ipmessanger, adium, team viewer for communication Means, I just want to add separator to identify them very quickly. Is it possible ? if yes - how ? Thanks in advance for sharing your knowledge. sagar

  Read the article

• Locking down a box on the web

  - by glowcoder

  I'm a Java developer who is looking to put a game on the web. I'm not much of a web or server guy, though, and frankly I seem a little lost at where I should start with putting something on the web. My application works fine on my machine, and I'm sure I can make it work fine on any box I put it on. But the security of that box is pretty important. If I sign up for a standard hosting package (let's say from GoDaddy or something) can I simply tell them "make port 12345 open for communication" and let them handle the rest of the security details? If I can't, what are the things I'm going to need to know to prevent my game server from getting hacked to shreds? (Links to solid resources fine by me!) Thanks!

  Read the article

• Network wide rule to forwared IP address

  - by Patrick

  Hi, we have a virtual machine which hosts a web based bug tracker in our network which is reached internally via e.g. 192.168.1.5:9800. From the outside we made a port forwarding in our firewall so that the web site can be reached via e.g. 72.10.10.10:9800. Now that works fine but the problem is that we got different IP addresses to reach the same service depending if we are in the office or at home and when the service sends out an email the link doesn't always work :) So we are looking for a solution to fix it. One could be to make a rule in out firewall that all communication to 72.10.10.10:9800 is forwarded to 192.168.1.5:9800... If that's possible that is considering it's an IP address + a port. The reason we used a port is because we only got one static public IP address but multiple virtual web appliances. Thanks for any suggestions or solutions :) Patrick PS: The network is a Win 2008 R2 domain by the way

  Read the article

• development server?

  - by ajsie

  for a project there will be me and one more programmer to develop a web service. i wonder how the development environment should be like. cause we need central storage (documents, pictures, business materials etc), file version handling, lamp (testing the web service) etc. i have never set up an environment for this before and want to have suggestions from experienced people which tools to use for effective collaboration. what crossed my mind: seperate applications: - google wave (for communication forth and back, setting up guide lines, other information) - team viewer (desktop sharing) - skype (calling) vps (ubuntu server): - svn (version tracking) - ftp (central storage) - lamp (testing the web service) - ssh (managing the vps) is this an appropriate programming environment? and regarding the vps, is it best practice to use ONE vps for all tasks listed up there? all suggestions and feedbacks are welcome!

  Read the article

• voice transmission using Wi-Fi in Ad hoc networking mode

  - by iam0hot

  We are looking to create Inter Vehicle communication system. So, a couple of vehicles should get connected automatically and could be able to share voice.. We decided to implement ad-hoc networking using Wi-Fi.. we are expecting it to cover a radius of 100 mts. If we could create a system like this.. and one of the user sends a voice information, does all people in the network get that ? What are the things we require to get this project done ?

  Read the article

• Light Voip and IM server for small teams

  - by Sihan Zheng

  So I have a small group that would need a self hosted Im/voip and possibly video conferencing solution. My goal is for a small group of people (no more than 40) to be able to collaborate within a local area network. I need something that is self hosted, so unfortunately outside solutions like Skype and hosted Lync would not work. I'm looking for something that would allow both one on one, and group communication, so and IRC server would not work. I'm hopefully looking for something that does not require multiple servers, or is too complex to set up. As a student, I have a license of Lync 2013, but setting that up on a single server without active directory is practically impossible. Would Lync 2010 be easier to do on a single server? Are there any other good solutions? Thanks

  Read the article

• MySQL-5.5.10 - Lost connection to MySQL server during query (Both Web Clients and MySQL Slaves)

  - by kwiksand

  We've just upgraded our existing MySQL5.1 DB servers to newer (much better) hardware with MySQL 5.5, and things have been going mostly smoothly for almost 6 weeks. Just the last few days, I've noticed a few errors, such as: From a MySQL Slave: [ERROR] Error reading packet from server: Lost connection to MySQL server during query ( server_errno=2013) Or From Apache/Other: Lost connection to MySQL server at 'reading initial communication packet', system error: 110 At one point this evening, many webnodes reported this error for a three minute period (many such reports as this was in a busy period). However, the issues don't appear to correspond with any times of extreme load. For all intents and purposes, the connection/thread load on MySQL is at a normal rate (between about 10 and 40 connected threads), and Web load has been a LOT higher at times over the last few weeks. Could there bee other reasons for these connection errors, that I'm not seeing?

  Read the article

• Sharing information between nodes in Beowulf Cluster

  - by Alejandro Sazo

  I am setting up a beowulf cluster and I've been reading that it might be necessary to make the home directory of the cluster users shared between them (assuming this users are local to each machine). The other case is leave each user with its own home and the communication is up to the master node. Another idea that came up was to use an LDAP unique user logged on each machine in the cluster, that keeps the idea of the shared home between nodes (but is only one home of one user). Which approach is better for this kind of cluster? Edit: The cluster is running openmpi and it will support cuda and opencl

  Read the article

• Linux does not communicate to Windows subinterface

  - by artaxerxe

  I set my NIC on Windows so that I have two interfaces: one (the first one) has IP 192.168.0.5 the other one has IP 10.10.10.1. On a Linux machine I set an interface to 10.10.10.2. On another Linux machine I set the interface to 10.10.10.3. And tried to ping those machines. Here is the result. Linux to Linux is ok. Windows to Linux also is ok. But Linux to Windows does not work. Can you help me on getting the communication between Linux and Windows? What should I do for this? I have to mention that those machines are connected through a switch. If you need any details, ask me please! Thanks in advance!

  Read the article

• Windows 2008R2 two node failover cluster creation fails

  - by Francois Wolmarans

  We have just installed two Windows 2008R2 Enterprise machines with identical hardware. When running the cluster validation everything is ok. When creating the cluster it fails with the following error: An error occurred while creating the cluster. An error occurred creating cluster 'CLUSTER04'. The parameter is incorrect The logfile on the first node where we are running our config from, does not show any errors. On the second node we get: The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk. I've double checked and all communication between the servers are fine. Even when creating a one node cluster it gives the error. There are other failover clusters we have setup without any issues.

  Read the article

• securing server to server http post

  - by ad-inf

  Website is developed on JSF, Servlet, using apache web server. In my website, I accept data submission from few restricted websites using HTTP POST method. We exchange some secure key to ensure that correct source is sending data. But is there any way to ensure that the data is submitted from specific domain / IP address only? In application level I can check request.header('Referer') , but some proxy or firewall might hide the referer. Can this configuration done on firewall or webserver level to authenticate server to server communication? Eg. Say my website is a payment gateway website, integrated with www.abc.com. I want only abc.com to submit data. So a user using abc.com should be able to submit data to my website only through abc.com, and not any other website.

  Read the article

• secure synchronization of large amount of data

  - by goncalopp

  I need to automatically mirror a large amount (terabytes) of files in two unix machines over a slow link (1 Mbps). This needs to be done frequently, but the data doesn't change too much (delta transmission doesn't saturate the link). The usual solution would be rsync, but there's an additional requirement: it's undesirable, from a security standpoint, that either the source or destination machines have (keyless) ssh keys to each other, or any kind of filesystem access. All communication between the two machines should thus be initialized (and mediated) through a third machine. I've asked a separate question about rsync in particular here. Are there other obvious solutions I'm missing?

  Read the article

• Configure VPN to access remote LAN network on Windows7

  - by PiotrK

  Situation: I have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all I've get: IP Address: 192.168.1.101 Mask: 255.255.255.255 Gateway: (none) LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?

  Read the article

• NFS-Root not working when booting over PXE

  - by Randy

  I am desperately trying to get a diskless client running over PXE-Boot using a NFS-Share as a root file system. I did this before some years ago but for some reason I am stucked at this since days. The TFTP-Server itself is running fine and booting a netinstaller works also fine. The kernel and initrd are loaded also but the bootprocess stops with this (screenshot) kernel panic. I'm using the squeeze standard i386-Kernel and I have prepared the initrd with this config: MODULES=most BUSYBOX=y KEYMAP=n COMPRESS=gzip BOOT=nfs DEVICE= NFSROOT=auto I also tried MODULES=netboot with the same outcome. My PXE-configuration looks like this: LABEL linux KERNEL diskless/debian-default/vmlinuz-2.6.32-5-686 APPEND root=/dev/nfs initrd=diskless/debian-default/vmlinuz-2.6.32-5-686 nfsroot=192.168.140.2:/storage/nfs-boot-images/default-squeeze ip=dhcp rw Furthermore I have captured the network communication of the client via tcpdump and learned that the client isn't even trying to connect to the NFS-share. Does anybody has got an idea what is going wrong here?

  Read the article

• In Debian, how can I route rtorrent to a certain network interface, say ppp0?

  - by Timo

  I have purchased a PPTP account from StrongVPN and configured the setup by these (http://pptpclient.sourceforge.net/howto-debian.phtml#configure_by_hand) instructions and now I want to have rtorrent do its communication to the Internet through this VPN tunnel. So I have a ppp0 interface, which has the VPN tunnel. What is the next step? I guess it has something to do with the routing tables? I am new to routing, so please be elementary and precise so that I understand! Thank you!

  Read the article

• All nework interfaces hang for seconds while one interface goes up/down

  - by user3698377

  I am building a client/server application that uses several network interfaces in parallel for redundancy, and I have noticed that while one network interface goes down or goes up, the communication on other interfaces hangs for several seconds. I could reproduce this behavior without my application in a simple way: there are 2 interfaces available on computer 1 ( Ethernet and WiFi ) ping from computer 2 the IP address of the Ethernet connection of computer 1 disconnect the WiFi of computer 1 ping hangs for seconds, and then the packets are traveling again between the 2 computers. The hanging happens as well if I turn back on the WiFi connection on computer 1. It happens as well if I ping the WiFi IP, and turn off/on the Ethernet connection ( or unplug/plug the cable). I am using Linux Ubuntu 12.04 on both computers. Any ideas why is this happening, and if / how can it be avoided?

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >