Search Results

Search found 7625 results on 305 pages for 'sj dev'.

Page 91/305 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• Why is my root filesystem always scanned at boot?

  - by luri

  I always have a pause at boot saying my filesystems are being checked (with a "press C to cancel" note, too). Actually (seeing boot.log) I think it's the / fs, which is located at /dev/sdb5 Several questions altoghether, here (hope this does not break any rule): Is this normal? Can I (or even should I) prevent this anyhow? According to boot.log (below) the fs does not seem to be 'clean', or, at least, it's in an state or condition that makes fsck always can it for errors for a while (just a few seconds). How can I fix it? Edit: This is my boot.log: fsck desde util-linux-ng 2.17.2 udevd[515]: can not read '/etc/udev/rules.d/z80_user.rules' /dev/sdb5: 249045/32841728 ficheros (0.3% no contiguos), 20488485/131338752 bloques init: ureadahead-other main process (1111) terminated with status 4 init: ureadahead-other main process (1116) terminated with status 4 Password: * Starting AppArmor profiles [160G Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox [154G[ OK ] * Setting sensors limits [160G [154G[ OK ] And this is dumpe2fs results for the filesystem being checked (well, the relevant part of the log): Filesystem volume name: <none> Last mounted on: / Filesystem UUID: 42509bf9-f3e6-460a-8947-ec0f5c1fbcc8 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 32841728 Block count: 131338752 Reserved block count: 6566937 Free blocks: 110850356 Free inodes: 32592701 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 992 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 Flex block group size: 16 Filesystem created: Fri Dec 10 19:44:15 2010 Last mount time: Mon Feb 14 17:00:02 2011 Last write time: Mon Feb 14 16:59:45 2011 Mount count: 1 Maximum mount count: 33 Last checked: Mon Feb 14 16:59:45 2011 Check interval: 15552000 (6 months) Next check after: Sat Aug 13 17:59:45 2011 Lifetime writes: 331 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 28049496 Default directory hash: half_md4 Directory Hash Seed: d3d24459-514b-4413-b840-e970b766095b Journal backup: inode blocks Journal features: journal_incompat_revoke Tamaño de fichero de transacciones: 128M Journal length: 32768 Journal sequence: 0x0005e0c4 Journal start: 1 This is the relevant (at least I think this is the fs being checked) line in fstab: #Entry for /dev/sdb5 : UUID=42509bf9-f3e6-460a-8947-ec0f5c1fbcc8 / ext4 errors=remount-ro 0 1

  Read the article

• MySQL Connector/Net 6.8.1 beta has been released

  - by Roberto Garcia

  Dear MySQL users, MySQL Connector/Net 6.8.1, a new version of the all-managed .NET driver for MySQL has been released. This is a beta release for 6.8.x and it's not recommended for production environments. It is appropriate for use with MySQL server versions 5.0-5.6 It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.8.1 version of MySQL Connector/Net has support for Entity Framework 6.0 and includes: - Changed EF migration history table to use a single column as primary key.- Removed installer validation when MySql for Visual Studio is installed.- Added idempotent script for Entity Framework 6 migrations.- Fix for WI #824, Connector/NET writes wrong version for binding redirects.- Fix for WI #825, Connector/NET 6.8.1 writes wrong namespace for binding redirects. The release is available to download at http://dev.mysql.com/downloads/connector/net/#downloads Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.6/en/connector-net.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows You can also post questions on our forums at http://forums.mysql.com/ Enjoy and thanks for the support! Connector/NET Team

  Read the article

• How do I get OBDII software working?

  - by NoBugs

  I have an ODBII USB cable for vehicle diagnostics, unfortunately I haven't been able to get it working on Ubuntu 12.04. The closest I've come is using the VAG-COM software with wine, using the ln -s /dev/ttyUSB0 ~/.wine/dosdevices/com1 trick and running stty -F /dev/ttyUSB0 speed 9600 repeatedly. It will connect and show the vehicle is OBDII, but none of the useful features seem to be working. I tried: Scantool - says it's connecting to the /dev/device in terminal, but doesn't. obdgpslogger - times out all the time. pyobd - This seems to be the most up-to-date source I could find, I had to adjust the code a bit to work (see here for changes). Still, in obd_io.py interpret_result function, it says it's looking for 4 space separated numbers, where the usb-serial is receiving bogus code "0100" instead? The device shows up in lsusb as: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Is the problem that these native tools don't expect a USB serial, or a serial of this type? Or are these apps too old to recognize OBD2 of this vehicle?

  Read the article

• Ubuntu hangs after replugging the modem

  - by Iftekhar Ahmed Shafi

  I am facing this issue on Ubuntu 12.04, which is for my Wimax modem with beceem chipset. If I replug the device Ubuntu goes in hang state. Its happens very often. If I plug the USB and restart it works most of the time. But it is very annoying to restart every time it hangs. The modem works smoothly in Windows 7. And it used to work OK in Ubuntu 11.10. Jun 13 19:25:54 iftekhar-HP-520-Notebook-PC dbus[1102]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper) Jun 13 19:25:54 iftekhar-HP-520-Notebook-PC dbus[1102]: [system] Successfully activated service 'org.freedesktop.UDisks' Jun 13 19:26:00 iftekhar-HP-520-Notebook-PC goa[2168]: goa-daemon version 3.4.0 starting [main.c:112, main()] Jun 13 19:26:47 iftekhar-HP-520-Notebook-PC udevd[432]: timeout 'cdrom_id --lock-media /dev/sr1' Jun 13 19:26:48 iftekhar-HP-520-Notebook-PC udevd[432]: timeout: killing 'cdrom_id --lock-media /dev/sr1' [1072] Jun 13 19:26:49 iftekhar-HP-520-Notebook-PC kernel: [ 85.820162] sr 2:0:0:0: Device offlined - not ready after error recovery Jun 13 19:26:49 iftekhar-HP-520-Notebook-PC udevd[432]: timeout: killing 'cdrom_id --lock-media /dev/sr1' [1072] Jun 13 19:27:20 udevd[432]: last message repeated 31 times Jun 13 19:27:25 udevd[432]: last message repeated 4 times What can I do to avoid this hangs and restarts?

  Read the article

• My laptop with Linux/ Ubuntu isn't working

  - by Andy Campos

  I have a dell laptop with ubuntu linux. A day I tried to start it up and a black screen just appeared that says: GNU GRUB version1.98+20100804-5ubuntu3 (and these clickable options:) -Ubuntu, with Linux 2.6.35-22-generic -Ubuntu, with Linux 2.6.35-22-generic (recovery mode) -Memory test (memtest86+) -Memory test (memtest86+, serial console 115200) When I click the first one, a bunch of text appears like: mount: mounting /dev/disk/by-uuid/8396a225... failed: invalid argument mount: mounting /dev on /root/dev failed: no such file or directory mount: mounting /sys on /root/sys failed: no such file or directory mount: mounting /proc on /root/proc failed: no such file or directory Target file system doesn't have requested /sbin/init No init found. Try passing init= bootarg Enter 'help' for a list of built-in commands BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) (initramfs) When I enter 'help' a bunch more incomprehensible text appears. Whenever I press the enter key all that pops up is (intetramfs) If anyone can make rhyme or reason out of this please, please help me out so it can boot up normally and i can be set. If there's some kind of special code I have to type in or something I know nothing about computers.

  Read the article

• MPlayer does not work

  - by Soham Pal

  Using the xubuntu desktop, on Ubuntu Raring updated from Quantal. MPlayer never really worked. No video, no audio, nothing. I really can't be any more helpful, so here's the log: petey@home-pc:~$ mplayer "/home/petey/Downloads/Polar Bear Cafe (480p)HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv" MPlayer SVN-r35984-4.7 (C) 2000-2013 MPlayer Team Playing /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv. libavformat version 55.0.100 (internal) libavformat file format detected. [lavf] stream 0: video (h264), -vid 0 [lavf] stream 1: audio (aac), -aid 0 [lavf] stream 2: subtitle (ass), -sid 0 VIDEO: [H264] 848x480 0bpp 23.810 fps 0.0 kbps ( 0.0 kbyte/s) Clip info: creation_time: 2012-04-05 21:36:10 Load subtitles in /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/ Can't open /dev/fb0: Permission denied [fbdev2] Can't open /dev/fb0: Permission denied VO: [v4l2] No such file or directory vo_cvidix: No vidix driver name provided, probing available ones (-v option for details)! [cyberblade] Error occurred during pci scan: Operation not permitted [mach64] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [nvidia_vid] Error occurred during pci scan: Operation not permitted [pm3] Error occurred during pci scan: Operation not permitted [radeon] Error occurred during pci scan: Operation not permitted [rage128] Error occurred during pci scan: Operation not permitted [s3_vid] Error occurred during pci scan: Operation not permitted [SiS] Error occurred during pci scan: Operation not permitted [unichrome] Error occurred during pci scan: Operation not permitted [VO_SUB_VIDIX] Couldn't find working VIDIX driver. ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 55.0.100 (internal) Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264) ========================================================================== ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 44100 Hz, 2 ch, floatle, 0.0 kbit/0.00% (ratio: 0->352800) Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio)) ========================================================================== [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory DVB card number must be between 1 and 4 AO: [null] 44100Hz 2ch floatle (4 bytes per sample) Starting playback... Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [null] 848x480 = 854x480 Planar YV12 A: 4.7 V: 4.7 A-V: 0.002 ct: 0.083 0/ 0 22% 0% 0.5% 0 0 MPlayer interrupted by signal 2 in module: sleep_timer A: 4.7 V: 4.7 A-V: 0.001 ct: 0.083 0/ 0 21% 0% 0.5% 0 0 Exiting... (Quit)

  Read the article

• Unable to start VMWare Workstation after upgrade to 13.04

  - by pst007x

  After upgrading to 13.04 I am unable to start VMWorkstation. I get the following message: Before you can run VMware, several modules must be compiled and loaded into the running kernel. Kernel Headers 3.8.0-19-generic Kernel headers for version 3.8.0-19-generic were not found. If you have installed them in a non-default path you can specify the path below. Does anyone have any idea what to do next? Ubuntu 13.04 64bit If I direct the path to: /usr/src/linux-headers-3.8.0-19-generic I get the following message: C header files matching your running kernel were not found. Thanks Additional: As suggested I run this in terminal: cd /lib/modules/$(uname -r)/build/include/linux sudo ln -s ../generated/utsrelease.h sudo ln -s ../generated/autoconf.h sudo ln -s ../generated/uapi/linux/version.h However, now I get the following: Before you can run VMware, several modules must be compiled and loaded into the kernel CANCEL / INSTALL I INSTALL, the window closes and nothing happens.... Any ideas? ADDITIONAL: I installed this: sudo apt-get install open-vm-tools open-vm-tools-dev open-vm-dkms open-vm-toolbox open-vm-tools-dev And it all launched... Many thanks for the suggestions and help... This is what I love about Ubuntu... it has a great helpful community... ! Note: Also found this which may help others too: HERE ADDITIONAL ERROR: Could not open /dev/vmmon: Is a directory. Please make sure that the kernel module `vmmon' is loaded. Failed to initialize monitor device. Monitor settings all greyed out RESOLUTION: Re-installation of Nvidia Drivers

  Read the article

• compile error in Ubuntu 10

  - by yozloy

  Hey guys I got a vps which run solusVM. I'm now trying to install ruby 1.9.2 in it. I follow this guide: after I run this command apt-get update apt-get -y install build-essential zlib1g zlib1g-dev libxml2 libxml2-dev libxslt-dev I got this error below root@makserver:/usr/local/src/ruby-1.9.2-p0# apt-get -f install Reading package lists... Done Building dependency tree... Done Correcting dependencies... Done The following extra packages will be installed: libc6 Suggested packages: glibc-doc The following packages will be upgraded: libc6 1 upgraded, 0 newly installed, 0 to remove and 80 not upgraded. Need to get 0B/4252kB of archives. After this operation, 4096B disk space will be freed. Do you want to continue [Y/n]? y debconf: apt-extracttemplates failed: Bad file descriptor (Reading database ... 21594 files and directories currently installed.) Preparing to replace libc6 2.11.1-0ubuntu7.2 (using .../libc6_2.11.1-0ubuntu7.8_amd64.deb) ... open2: fork failed: Cannot allocate memory at /usr/share/perl5/Debconf/ConfModule.pm line 59 dpkg: error processing /var/cache/apt/archives/libc6_2.11.1-0ubuntu7.8_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 12 Errors were encountered while processing: /var/cache/apt/archives/libc6_2.11.1-0ubuntu7.8_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Anybody can tell me how can I correct this. Thanks

  Read the article

• Is it correct to fix bugs without adding new features when releasing software for system testing?

  - by Pratik

  This question is to experienced testers or test leads. This is a scenario from a software project: Say the dev team have completed the first iteration of 10 features and released it to system testing. The test team has created test cases for these 10 features and estimated 5 days for testing. The dev team of course cannot sit idle for 5 days and they start creating 10 new features for next iteration. During this time the test team found defects and raised some bugs. The bugs are prioritised and some of them have to be fixed before next iteration. The catch is that they would not accept the new release with any new features or changes to existing features until all those bugs fixed. The test team says that's how can we guarantee a stable release for testing if we also introduce new features along with the bug fix. They also cannot do regression tests of all their test cases each iteration. Apparently this is proper testing process according to ISQTB. This means the dev team has to create a branch of code solely for bug fixing and another branch where they continue development. There is more merging overhead specially with refactoring and architectural changes. Can you agree if this is a common testing principle. Is the test team's concern valid. Have you encountered this in practice in your project.

  Read the article

• Please help me decide if I should I change jobs [closed]

  - by KindaNewbie

  About me: I am very entrepreneurial and believe I would do well working solo as a consultant and possibly hiring help. I do want to do that at some point. I love to learn and a good challenge. Please help me make this decision! Current job (I am there for about 4 years): Pros: secure job good pay (I guess I am 80 percentile for my level/geographical area) large corporation - main business is not software excellent health insurance for low cost to me, pension, 401k matching, 6 weeks paid time off per year small dev team use of latest technologies (mostly WPF/silverlight) low supervision (I can do personal things all the time) I get to do a lot of moonlighting and my goal was to go solo full-time in a year or so. Cons: small team of non-professional devs 50% of my time I do things I don't enjoy projects are not meaningful to the organization If I left it wouldn't be too hard for them - business would resume as usual. Nobody besides my small team of 3 has any idea about software development whatsoever. Prospect job: Pros: small/agile software company same salary as current job same size dev team but all are very sharp (I would probably be the weakest of the team in the beginning) technology used is outside my comfort zone (latest cool web technolgies such as html5/jquery/...) - I am not a web dev and they know that. ton of learning opportunity Start-up - possibility of stock option/partial ownership of some sort Cons: Small office space - not able to do personal things as often (may be pro) No room for moonlighting less benefits (but salary can compensate for that)

  Read the article

• Impossible to boot Ubuntu on a USB stick (OS X Montain Lion)

  - by user109513

  I know this has been discussed over and over but I still cannot run Ubuntu on a USB stick. Here's the step I followed: 1. I downloaded Ubuntu 12.10 (ubuntu-12.10-desktop-i386.iso) from http://www.ubuntu.com/download/desktop which I renamed 'ubuntu.iso'. I bought my Mac mid-2010, it has an Intel processor. 2. I formated my 16GB USB stick with HFS+ File System following this tutorial: http://www.switchingtomac.com/tutorials/how-to-format-a-drive-or-partition-with-the-hfs-file-system 3. I opened a terminal and typed: hdiutil convert -format UDRW -o ~/Downloads/ubuntu.img ~/Downloads/ubuntu.iso It created ubuntu.iso.dmg 4. I ran 'diskutil list' and identified the device node assigned to the USB. 5. I unmounted it: diskutil unmountDisk /dev/disk2 6. Then, I entered the command: sudo dd if=~/Downloads/ubuntu.img.dmg of=/dev/rdisk2 bs=1m. It seemed to work. A Mac message poped up saying that the system doesn't recognized the disk, I pressed 'ignore'. 7. I ejected the USB using diskutil eject /dev/disk2, then removed the USB. 8. I rebooted the computer, plugged the USB key, pressed ALT.I could see my Macintosh partition and my Windows partition, but couldn't see my USB stick. Any help will be very appreciated :) Victor

  Read the article

• Why can't I install 10.04 on a system that already has 8.04?

  - by Android Eve

  Ubuntu 10.04 is beautiful. I love it. I am dying to install it on my PC, alongside the existing Ubuntu 8.04 (from which I write this message right now). But... it won't let me! When I reach the partitioning stage (manual!) Ubuntu 10.04 sees my two HDDs as one RAID volume. It doesn't see all the partitions I already have in place in /dev/sda and /dev/sdb. Even Windows 7 doesn't behave like this... (yes, I actually managed to install Windows 7 64-bit in dual-boot configuration with Ubuntu 8.04 on this same system). Note: GParted on Ubuntu 10.04 (live CD) sees the partition intended for Ubuntu 10.04 (/dev/sda4) perfectly, but is unable to format it. Note: I also removed that partition trying to reformat it via GParted once 10.04 LiveCD is loaded. It didn't help. I believe that the problem lies in Ubuntu "deciding for me" that the HDDs should be "seen" as a RAID, hence any partition is seen by GParted as "busy" or "locked". Any idea how to solve this problem?

  Read the article

• How can I make an unmounted / unmountable NTFS disk not show up in the nautilus devices area?

  - by Dennis

  I have an idea that my /etc/fstab is a real mish-mash and I don't remember how it got that way, first of all it looks like this UUID=9EB80807B807DD21 /media/Storage ntfs-3g users 0 0 UUID=a60397fd-964a-45b1-ad35-53c8a4bee010 / ext4 defaults 0 1 UUID=1764825d-b8ba-4620-b3b0-e979b6f4f5c4 swap swap sw 0 0 UUID=255DA1E406E29DBC /media/sda2 ntfs-3g defaults 0 0 UUID=2CCCF161CCF1262C /mnt/sda1 ntfs-3g umask=000 0 0 /dev/fd0 /media/floppy0 vfat noauto 0 0 I started with an old XP install on disk /dev/sda that I don't use anymore but didn't want to delete, so I shrunk the XP partition, added a NTFS partition that would be common to both systems (Labeled it "Common" in XP), then installed Lucid on an extended ext4 partition. On this disk of course the ext4 system partition comes up as /, the go between partition auto-mounts on /media/sda1 but shows up in Nautilus as COMMOM, while the XP system disk does not show up in Nautilus, but I can get to it by navigating to /mnt/sda1. A second hard drive (/dev/sdb) that I stuck in was already formatted NTFS with a bunch of stuff and labeled "Storage". It auto-mounts to /media/Storage but another un-mounted disk also shows up in the Nautilus device area called Storage but it can't be mounted (Here and in the "Places" are the only times it appears) I would primarily like this non-existant (or already mounted depending on how you look at it) disk to not show up, but I wouldn't mind an explanation of why one labeled partition auto-mounts to a /media mount point but shows up by label, one does not show up as mounted at all but mounts to a /mnt mount point and is there for navigation, and one is mounted to a directory of the same name as the label. I would love to have some consistancy / direction on what is proper in this circumstance. No doubt I caused this with the fstab but I really don't remember what my rational was if I edited it manually

  Read the article

• Burg Custom Icons work only with specific themes

  - by el10780

  I have made a custom icon for burg loader for my Lenovo Recovery Partition.I have made 3 icons : large_qdrive.png (128 X 128 pixels) small_qdrive.png (24 X 24 pixels) grey_qdrive.png (128 x 128 pixels) The .png icons that I created I made them using gimp from a qdrive.ico file that I found in the Lenovo Recovery Partition. I transferred the icons to the /boot/burg/themes/icons folder and I added to the class list of the grey,large,small and the hover files the following lines : -qdrive { image = "$$/large_qdrive.png" } in the large file -qdrive { image = "$$/small_qdrive.png" } in the small file -qdrive { image = "$$/grey_qdrive.png" } in the grey file -qdrive { image = "$$/grey_qdrive.png:$$/large_qdrive.png" } in the hover file I ran sudo update-burg and after that I modified the following line in the burg.cfg file : menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { to menuentry "Windows 7 (loader) (on /dev/sda2)" --class qdrive --class os { and I also tried to change the title for the Lenovo Recovery Partition,so I tried this as well: menuentry "Lenovo Recovery Partition (on /dev/sda2)" --class qdrive --class os { None of this tries enforced actually burg loader to use the custom icon that I made and I can't figure out why. I have to mention also that there are a few themes that I have installed in burg which actually are able to use the small_qdrive.png icon that I made,but all the others which use either the large_qdrive.png or the grey_qdrive.png weren't able to use the custom icons. I have double checked for typos in all the files that I have created or I modified,so I am pretty sure that I haven't misspelled anything. I have checked also the title of the custom icons that I made and neither of them have a typo. I have looked also if there are any other folder that the themes might use to retrieve the icons,but it seems that all of them except for **Fortune** theme,which I downloaded from OMG!UBUNTU,use the icons folder which is located in /boot/burg/themes/icons I tried to add the custom icons to the icons folder of the theme **Fortune**,but still nothing happened.

  Read the article

• Running CORN job on Ubuntu server for SugarCRM

  - by Logik

  i am pretty inexperienced in Linux.So be descriptive on your answer. My environment :Local Linux server 12.04 hosting Sugar CRM 6.5.2. There is area in sugar CRM called scheduler. I can configured some predefined jobs here. in my case i am trying to run email reminders (ever min/hour/day/month). For this scheduler to be effective, i read some where i need to setup CRON job. So i did some research & finally put following lines in CRONTAB for the root user, as per instructions given in sugarCRM. cd /var/www/crm; php -f cron.php /dev/null 2&1 Well i am creating contracts in my sugarCRM (AOS module) & i want email reminders to be sent for these contracts to the concern person. Now my sugarCRM email is configured correctly & i can send test emails using it. But the CRON + scheduler not giving any result. I can't receive any emails. Then i tried to read /var/log/syslog & it is showing entry for following line each minute. Oct 27 15:03:01 unicomm CRON[28182]: (root) CMD (cd /var/www/crm; php -f cron.php /dev/null 2&1) I've few questions: 1) what does the CRON job line i've added in crontab mean? cd /var/www/crm; php -f cron.php /dev/null 2&1 is not making any sense to me. 2) How am i suppose to get this thing work? I've searched a lot (including SugarCRM forum), but no luck.

  Read the article

• Grub does not show a Windows 8 option after dual boot

  - by skytreader

  So, I've successfully dual-booted my Windows 8 machine with Ubuntu 12.04 . However, I still don't have a convenient method of choosing what OS to load at boot time. After installing Ubuntu, my computer still loads Windows 8 directly. I then added grubx64.efi to the white list of my boot loader. But after that, my machine loads Ubuntu directly without even a shadow of GRUB showing up! I used boot-repair and I got this paste.ubuntu URL: paste.ubuntu.com/1326074. After running boot-repair (and re-white listing the grubx64.efi file), GRUB now shows up but without any Windows 8 option! Lastly, I ran sudo fdisk -l and it gave me this: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x6396389f Device Boot Start End Blocks Id System /dev/sda1 1 1465149167 732574583+ ee GPT Partition 1 does not start on physical sector boundary. I'm guessing my problem has something to do with the warning from fdisk above but I don't know what to do with it. How do I proceed now?

  Read the article

• How to auto-mount a copied encrypted home

  - by LedZ

  How can I auto-mount and use my encrypted home that I copied to another partition on the same hard disk? I'm running Ubuntu 11.10. My encrypted home is on sda1. There I've 2 users: userA and userB. Another partition is sda3 on which I have some other Data. BTW, sda1 is formatted as EXT4, sda3 is formatted as EXT3. I did the following: I logged out from GUI (Gnome) and changed (using Ctrl+Alt+F1) to the shell. From there I logged in, changed to sudo (using sudo -s) . After then I created a new mountpoint (tmp) under /mnt (mkdir /mnt/tmp) mounted /dev/sda3 on that mountpoint /mnt/tmp (mount /dev/sda3 /mnt/tmp) copied my encrypted /home to /mnt/tmp using rsync (rsync --acvxASXH --progress --stats /home/ /mnt/tmp/). After the “copy-procedure” I looked to my “new home” in /mnt/tmp and there I found the following 3 folders: userA, userB, .ecryptfs My structure for /dev/sda3 mounted on /mnt/tmp looks like the following (userB in ecryptfs I've not listed): -userA ¦ +userB ¦ +.ecryptfs ¦ +userA ¦ + auto-mount ¦ + auto-umount ¦ + Private.mnt ¦ + Private.sig ¦ + wrapped-passphrase ¦ + .wrapped-passphrase.recorded ¦ + .Private + (encrypted file_1) + (encrypted file_2) + (encrypted file_n) Now I would like that this copy of the original home-directory should act with the same behavior as the original home-directory means, that it should be auto-mounted at reboot and give me access to my unencrypted files and after logout all my files should be encrypted again. Any suggestions?

  Read the article

• JEOS

  - by john.graves(at)oracle.com

  JEOS stands for Just Enough Operating System.  It is  great environment for building virtual machines without all the clutter of a windowing system, games, office products, etc.  It is from Ubuntu and you install it using the Ubuntu server install, but rather than picking a standard install, press F4 and choose “Install a minimal system.” Note: The “Install a minimal virtual machine” is specific to VMWare and I plan to use VirtualBox. Be sure to include Open SSH in the install so that it installs sshd. *** Also, if you plan to install XE, you’ll need to modify the partitions to have a larger swap space (at least 1.5 G). *** Once the install is done, I find it useful to install a few other items. Update Ubuntu apt-get update Install some other tools apt-get openjdk-6-jre Yes, java will be included in any of the WebLogic installs, but I need this one if I want to do remote display (for config wizards, etc). apt-get gcc Some apps require to rebuild the kernel modules, so you’ll need a basic compiler. Install guest additions (Choose the VirtualBox Devices->Install Guest Additions…” option.  This sets up a /dev/cdrom or /dev/cdrom1.  You’ll need to manually mount this temporarily: sudo mount /dev/cdrom /mnt Then run the linux .bin file. Update nofile limits.  Most java apps fail with the standard ubuntu settings: edit /etc/security/limits.conf and add these lines at the end: *     soft nofile 65535 *     hard nofile 65535 root  soft nofile 65535 root  hard nofile 65535 These numbers are very high and I wouldn’t do this on a production system, but for this environment it is fin. To get rid of the annoying piix error on boot, add the following line to the /etc/modprobe.d/blacklist.conf file blacklist i2c_piix4

  Read the article

• Is it a must to focus on one specific IT subject to be succesful?

  - by Ahmet Yildirim

  Lately I'm deeply disturbed by the thought that I'm still not devoted to one specific IT subject after so many years of doing it as a hobby. I've been in so many different IT related hobbies since I was 12. I have spent 8 years and now I'm 20 and just finished freshman year at Computer Eng. Just to summarize the variety: 3D Game Dev. and Modelling (Acknex, Irrlicht , OpenGL, GLES, 3DSMAX) Mobile App.Dev (Symbian, Maemo, Android) Electronis (Arduino) Web.Dev. (PHP, MYSQL, Javascript, Jquery, RaphaelJS, Canvas, Flash etc.) Computer Vision (OpenCV) I need to start making money. But I'm having problem to pick the correct IT business to do so. Is it a problem to have interest in so many different IT subjects?(in business world) I'm having a lot of fun by doing all those stuff from time to time. Other than making money I also noticed that having so many different interests is lowering my productivity. But I'm still having difficulty to pick one. I'm feeling close to all those subjects (time to time).

  Read the article

• Still can't mount windows 8 drive after restart

  - by Ishai Bloch

  After following the instructions in other posts, I am still getting the same error when I try to mount my Windows 8 drive in Ubuntu 14.04 on a dual boot system. I have disabled fast start after shutdown, hybrid hibernation, and the preinstalled Asus Instant On service. I have tried restarting Windows rather than shutting down. In all cases I get the same error message, namely: Error mounting /dev/sda4 at /media/jesse/OS: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sda4" "/media/jesse/OS"' exited with non-zero exit status 14: Windows is hibernated, refused to mount. Failed to mount '/dev/sda4': Operation not permitted The NTFS partition is in an unsafe state. Please resume and shutdown Windows fully (no hibernation or fast restarting), or mount the volume read-only with the 'ro' mount option. I did not have the same issue before upgrading from Ubuntu 12 to 14. For what it's worth my computer is supposedly a "hybrid" with an SSD drive installed, although I can't see that the SSD drive is being used at all with my present settings. Any thoughts?

  Read the article

• What can I do to utilize all my hard disk space?

  - by Twatcher

  I had windows XP running on my computer. Then I installed Ubuntu from under windows. Then I decided I wanted to have only Ubuntu also because I got a system message that I am out of disk space. I loaded up my system from a live Ubuntu DVD and deleted the partition with windows on it and also the other partition that had my data on it. I expanded the partition which I thought to be the system partition (since there was no other partition left It had ext format. After that Ubuntu was working fine and I thought I have enough disk space, since my harddrive is an 80 GB ATA Maxtor. I left a small partition as backup. But after downloading a small amount of files I got the message again, that I am running out of disk space. I don't now. How can UI make my disk space bigger? I am not used to Ubuntu's file system, and I don't have the overview on how I can actually see how much space there is left for me to use. I have basically now 1 partition with the system on it and one small backup (as far as I understand). My system is (from system utility) Ubuntu 12.04 LS 3,9 GB Intel Core 2 2,4 Ghz 80 GB ATA Maxtor Here are the results for sudo fdisk -l Disk /dev/sda: 80.0 GB, 79998918144 bytes<br> 255 heads, 63 sectors/track, 9725 cylinders, total 156247887 sectors<br> Units = sectors of 1 * 512 = 512 bytes<br> Sector size (logical/physical): 512 bytes / 512 bytes<br> I/O size (minimum/optimal): 512 bytes / 512 bytes<br> Disk identifier: 0x41ab2316<br> Device Boot Start End Blocks Id System<br> /dev/sda1 * 63 123750399 61875168+ 7 HPFS/NTFS/exFAT<br> /dev/sda2 123750400 156246015 16247808 7 HPFS/NTFS/exFAT<br>

  Read the article

• Help with dual booting Windows 8.1 Professional and Ubuntu 13.10

  - by user1292548

  I recently installed a clean version of Windows 8.1 Professional on my Lenovo Y500 (with Samsung 256GB 840 Pro SSD). I have Windows all set up and running normally. I am trying to dual boot Windows 8.1 and Ubuntu 13.10, but the installation procedure don't allow me to either "Install alongside..." or shows my SSD partitions correctly when I chose the "Something Else" option. I have created a 25GB partition of free space in the Windows disk manager, but on the installation screen on Ubuntu, it shows the whole drive as a free space. I have tried installing with a burned .ISO disk and a bootable USB, the results are the same for both. Windows Disk Management screen: http://imageshack.us/a/img855/9504/59zu.jpg The Ubuntu installation screen: http://imageshack.us/a/img62/2712/9g6i.jpg I've ran into this problem before when trying to dual boot Ubuntu and Windows 7 Professional a month ago. But I gave up and never resolved the issue. --EDIT-- I tried what Eero Aaltonen suggested, and this is my result: ubuntu@ubuntu:~$ sudo parted /dev/sda print Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA Samsung SSD 840 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags ubuntu@ubuntu:~$

  Read the article

• Who keeps removing that file?

  - by mgerdts

  Over the years, I've had many times when some file gets removed and there's no obvious culprit.  With dtrace, it is somewhat easy to figure out:  #! /usr/sbin/dtrace -wqs syscall::unlinkat:entry /cleanpath(copyinstr(arg1)) == "/dev/null"/ {         stop();         printf("%s[%d] stopped before removing /dev/null\n", execname, pid);         system("ptree %d; pstack %d", pid, pid); } That script will stop the process trying to remove /dev/null before it does it.  You can allow it to continue by restarting (unstopping?) the command with prun(1) or killing it with kill -9.  If you want the command to continue automatically after getting the ptree and pstack output, you can add "; prun %d" and another pid argument to the system() call.

  Read the article

• What are some efficient ways to set up my environment when working on a remote site?

  - by Prefix

  Hello fellow Programmers, I am still a relatively new programmer and have recently gotten my first on-campus programming position. I am the sole dev responsible for 8 domains as well as 3 small sized PHP web apps. The campus has its web environment divided into staging and live servers -- we develop on the staging via SFTP and then push the updates to the live server through a web GUI. I use Sublime Text 2 and the Sublime SFTP plugin currently for all my dev work (its my preferred editor). If I am just making an edit to a page I'll open that individual file via the ftp browser. If I am working on the PHP web app projects, I have the app directory mapped to a local folder so that when I save locally the file is auto-uploaded through Sublime SFTP. I feel like this workflow is slow and sub-optimal. How can I improve my workflow for working with remote content? I'd love to set up a local environment on my machine as that would eliminate the constant SFTP upload/download, but as I said there are many sites and the space required for a local copy of the entire domain would be quite large and complex; not to mention keeping it updated with whatever the latest on the staging server is would be a nightmare. Anyone know how I can improve my general web dev workflow from what I've described? I'd really like to cut out constantly editing over FTP but I'm not sure where to start other than ripping the entire directory and dumping it into XAMP.

  Read the article

• Ubuntu is not detecting my android device

  - by user3514160

  I am new to android. I have just downloaded and installed android sdk. Now when I run the application from eclipse, my device is not getting detected. I have googled and was brought up with this as my solution, but that also didn't worked. Here's the 51-android.rules SUBSYSTEMS=="usb", ATTR{idProduct}=="0bb4", ATTR{idProduct}=="0c03", MODE="0666", GROUP="plugindev", OWNER="<username>" After that I rebooted my laptop, and ran this command: username@laptopname:~/Android/adt-bundle/sdk/platform-tools$ adb devices The output i get is: * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached ???????????? no permissions EDIT crazydeveloper@crazydeveloper:~$ lsusb Bus 002 Device 004: ID 0bb4:0c03 HTC (High Tech Computer Corp.) Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 04f2:b337 Chicony Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub crazydeveloper@crazydeveloper:~$ ls -l /dev/bus/usb/004/ ls: cannot access /dev/bus/usb/004/: No such file or directory crazydeveloper@crazydeveloper:~$ Edit: 2 After the answer submitted here's the output that i got: crazydeveloper@crazydeveloper:~$ ls -l /dev/bus/usb/002 total 0 crw-rw-r-- 1 root root 189, 128 May 7 09:45 001 crw-rw-r--+ 1 root root 189, 129 May 7 09:45 002 crw-rw-rw- 1 root plugdev 189, 130 May 7 09:48 003 I am using Micromax Canvas 2.2 A114 - Android Version 4.2.2 Please help me. Thanks.

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >