Search Results

Search found 9816 results on 393 pages for 'blade servers'.

Page 92/393 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Running Best Practice Analyzer on Windows 2012 yields error "Result file has not yet been generated"

  - by mhildreth

  Whenever I run the Best Practice Analyzer on a Windows 2012 server with IIS installed, I receive the error: "There has been a Best Practice Analyzer error for Model Id 'Microsoft/Windows/WebServer'. The Result file has not yet been generated. Please perform the scan first and try again." I'm doing this from the "Local Server" section of the Server Manager. I'm logged in as with a domain credential that has administrative rights on the server. I don't know how to generate the result file or where it would be located. I have 4 servers, all with IIS and this is happening on all of them. The servers are practically brand new so there isn't anything really exceptional about their setup. Any suggestions on how to generate the result file? Thanks in advance.

  Read the article

• DFS Replication only works in one direction

  - by depthless

  SERVER1 - SBS 2011 SERVER2 - Windows Server 2008r2 I'm using DFS-R. Changes work perfectly from 1 to 2 but nothing propagates from 2 to 1. When I attempt to run: dfsrdiag staticrpc /port:5001 /member:SERVER2 I get the error: [ERROR] Failed to connect to WMI services on computer: SERVER2.domain That command works just fine in the other direction. I've completely disabled the firewall on both ends. SERVER1 pings SERVER2 just fine. RPC Service is running on both servers. WMI Service is running on both servers.

  Read the article

• Why do I get Access Denied when using WinRM?

  - by Kev

  Following on from this question: Why does my PowerShell script hang when called in PSEXEC via a batch (.cmd) file? I took the advice from Jim B and installed WinRM. To recap I have two servers: HMon01 - runs Windows 2003 Standard SP2 Web1928 - runs Windows 2008 Standard SP2 Both servers are standalone. I installed WinRM for Windows 2003 from here and configured WinRM as follows on both machines: Client NetworkDelayms = 5000 URLPrefix = wsman AllowUnencrypted = false Auth Basic = true Digest = true Kerberos = true Negotiate = true Certificate = true DefaultPorts HTTP = 80 HTTPS = 443 TrustedHosts = * The problem I have is that if I remotely execute commands using the remote machine's built in Administrator account then all is well. However I have an account on the remote machine named remoteexec which is a member of the Administrators group (we disable our Administrator accounts). If I use this account then I get Access Denied errors. I've done all the usual things such as checking passwords and the like. Why would this be?

  Read the article

• Cacti: "An internal Net-Snmp error condition detected in Cacti snmp_count"

  - by Recc

  There's the odd forum topic about an error similarly obscure as this, but I haven't seen any for snmp_count in particular. Also I don't see graphing problems, though I can't simply go and eyeball all graphs. However the poller does time out and has to be stopped by its internal process preventing overruns. If I filter out the flood of this error in the log I dont get anything else except the poller timeout: 06/12/2014 12:48:00 PM - POLLER: Poller[0] Maximum runtime of 58 seconds exceeded. Exiting. 06/12/2014 12:48:00 PM - SYSTEM STATS: Time:58.8566 Method:spine Processes:1 Threads:40 Hosts:1923 HostsPerProcess:1923 DataSources:61584 RRDsProcessed:0 06/12/2014 12:48:00 PM - SPINE: Poller[0] ERROR: Spine Timed Out While Processing Hosts Internal I saw in the running processes /usr/local/spine/spine 0 2053 that's always left behind. When I kill it the flooding of the error stops. Of course it's the same on the next poll run as it goes through the devices. 2053 is apparently the DB ID for a device. I deleted it completely to see if that stops it. It doesn't, instead 2052 is seen there. I suspect It'll be the same if I keep deleting devices which I will not do. This started happening midday when I wasn't doing anything to the cacti server. I have tried reducing Maximum Threads per Process to 1 and Number of PHP Script Servers to 1. I've been running it at 10 script servers / 40 threads for months with poll cycle time of about 20 sec. I just found out Running snmpwalk on any host would begin returning the values but then timeout halfway through. This doesn't happen from different servers on the network this Cacti is suggesting still that it's a problem with it locally. Any suggestions? For one polling cycle I changed to use cmd.php instead. then I started getting errors like CMDPHP: Poller[0] Host[45] DS[541] WARNING: Result from SNMP not valid. Partial Result: U Perhaps as expected. Looking closely I see that every snmpwalk I do is interrupted at the same place as if some byte limit is hit and the connection torn down.

  Read the article

• RDS installation failure on 2012 R2 Server Core VM in Hyper-V Server

  - by Giles

  I'm currently installing a test-bed for my firms Infrastructure replacement. 10 or so Windows/Linux servers will be replaced by 2 physical servers running Hyper-V server. All services (DC, RDS, SQL) will be on Windows 2012 R2 Server Core VMs, Exchange on Server 2012 R2 GUI, and the rest are things like Elastix, MailArchiver etc, which aren't part of the equation thus far. I have installed Hyper-V server on a test box, and sucessfully got two virtual DC's running, SQL 2014 running, and 8.1 which I use for the RSAT tools. When trying to install RDS (The old fashioned kind, not the newer VDI(?) style), I get a failed installation due to the server not being able to reboot. A couple of articles have said not to do it locally, so I've moved on. Sitting at the Powershell prompt on the Domain Controller or SQL server (Both Server Core), I run the following commands: Import-Module RemoteDesktop New-SessionDeployment -ConnectionBroker "AlstersTS.Alsters.local" -SessionHost "AlstersTS.Alsters.local" The installation begins, carries on for 2 or 3 minutes, then I receive the following error message: New-SessionDeployment : Validation failed for the "RD Connection Broker" parameter. AlstersTS.Alsters.local Unable to connect to the server by using WindowsPowerShell remoting. Verify that you can connect to the server. At line:1 char:1 + NewSessionDeployment -ConnectionBroker "AlstersTS.Alsters.local" -SessionHost " ... + + CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorException + FullyQualifiedErrorID : Microsoft.PowerShell.Commands.WriteErrorException,New-SessionDeployment So far, I have: Triple, triple checked syntax. Tried various other commands, and a script to accomplish the same task. Checked DNS is functioning as it should. Checked to the best of my knowledge that AD is working as it should. Checked that the Network Service has the needed permissions. Created another VM and placed the two roles on different servers. Deleted all VMs, started again with a new domain name (Lather, rinse, repeat) Performed the whole installation on a second physical box running Hyper-V Server Pleaded with it Interestingly, if I perform the installation via a GUI installation, the thing just works! Now I know I could convert this to a Server Core role after installation, but this wouldn't teach me what was wrong in the first instance. I've probably got 10 pages through various Google searches, each page getting a little less relevant. The closest matches seem to have good information, but it doesn't seem to be the fix for my set-up. As a side note, I expected to be able to "tee" or "out-file" the error message into a text file, but couldn't get that to work either, so I've typed in the error message manually. Chaps, any suggestions, from the glaringly obvious, to the long-winded and complex? Thanks!

  Read the article

• SQL Cluster on Hyper V Failover Cluster

  - by Chris W

  We have a VM running SQL Server on a 6 node cluster of blades. The VM's data files are stored a SAN attached using a direct iSCSI connection. As this SQL server will be running a number of important databases we're debating whether we should be clustering the SQL Server or will the fact that the VM is running in the cluster itself sufficient to give us high availability. I'm used to running SQL clusters when dealing with physical servers but I'm a bit sketchy on what is best practice when all the servers are just VMs sat on Hyper V. If a blade running the VM fails I presume the VM will be started up on another load. I'm guessing the only benefit that adding a SQL cluster to the setup will give us it that the recovery time after a failure will be a little quicker? Are there any other benefits?

  Read the article

• Assigning a home DNS to be secondary only?

  - by Sanarothe

  Hi. I have a small domain lab set up at home, including DNS/DHCP on the Win2008 server. I'd like to be able to refer to my domain clients by name, but I find that I get a slowdown when using an internal DNS. Win DNS refers to my ISP's upstream dns (I also tried Google's DNS servers for a little while) but it feels like there's an extra couple seconds for each request when I'm using anything except the DNS servers fetched via DHCP from my ISP. I tried adding my local DNS to my router's DHCP (Need to use router to fetch DHCP info from ISP, even though none of it ever changes, since I'm behind NAT) So, my question is: Is there any way to set my internal DNS server to be secondary to a dynamically retrieved upstream DNS? I want the internal server to be queried only if the ISP dns fails, or to be queried only for a certain TLD (.iv right now. I guess for best practices I should change it to .internal)

  Read the article

• pxe boot fails with message: no DEFAULT or UI configuration directive found

  - by spockaroo

  I am trying to pxe-boot a machine (client), and in the process I am trying to setup a tftp server that this machine can boot off. On the server, which runs Ubuntu 10.10, I have setup dhcp, dns, nfs, and tftp-hpa servers. All the servers/deamons start fine. I tested the tftp server by using a tftp client and downloading a file that the server directory hosts. My /etc/xinet.d/tftp looks like this service tftp { disable = no socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -v -s /var/lib/tftpboot only_from = 10.1.0.0/24 interface = 10.1.0.1 } My /etc/default/tftpd-hpa looks like this RUN_DAEMON="yes" OPTIONS="-l -s /var/lib/tftpboot" TFTP_USERNAME="tftp" TFTP_DIRECTORY="/var/lib/tftpboot" TFTP_ADDRESS="0.0.0.0:69" TFTP_OPTIONS="--secure" My /var/lib/tftpboot/ directory looks like this initrd.img-2.6.35-25-generic-pae vmlinuz-2.6.35-25-generic-pae pxelinux.0 pxelinux.cfg -- default I did sudo chmod 644 /var/lib/tftpboot/pxelinux.cfg/default chmod 755 /var/lib/tftpboot/initrd.img-2.6.35-25-generic-pae chmod 755 /var/lib/tftpboot/vmlinuz-2.6.35-25-generic-pae /var/lib/tftpboot/pxelinux.cfg has the following contents SERIAL 0 19200 0 LABEL linux KERNEL vmlinuz-2.6.35-25-generic-pae APPEND root=/dev/nfs initrd=initrd.img-2.6.35-25-generic-pae nfsroot=10.1.0.1:/nfsroot ip=dhcp console=ttyS0,19200n8 rw I copied /var/lib/tftpboot/pxelinux.0 from /usr/lib/syslinux/ after installing the package syslinux-common. Also just for completeness, /etc/dhcp3/dhcpd.conf the following lines (relevant to this interface) subnet 10.1.0.0 netmask 255.255.255.0 { range 10.1.0.100 10.1.0.240; option routers 10.1.0.1; option broadcast-address 10.1.0.255; option domain-name-servers 10.1.0.1; filename "pxelinux.0"; } When I boot the client machine, and watch the output over the serial port, I notice that the client requests an ip address from the server and gets it. Then I see TFTP being displayed - indicating that it is trying to connect to the TFTP server. This succeeds, and I see TFTP.|, which return immediately displaying the following message PXELINUX 4.01 debian-20100714 Copyright (C) 1994-2010 H. Peter Anvin et al No DEFAULT or UI configuration directive found! boot: /var/log/syslog shows Feb 20 15:24:05 ch in.tftpd[2821]: tftp: client does not accept options What option is it talking about in the syslog? I assume it is referring to OPTIONS or TFTP_OPTIONS, but what am I doing wrong?

  Read the article

• Move exchange mailboxes cross forest

  - by Aceth

  Having a hard time migrating user mailboxes across 2 forests. I've set up ADMT 3.2, No dns issues and fully route-able between the domains etc. Have come to migrate user mailboxes and the exchange shell just comes back with ... [PS] C:New-MoveRequest -Identity "username" -TargetDatabase "maildb" -RemoteGlobalCatalog 'gdc.doman.local' -RemoteCredential (get-credential) -TargetDeliveryDomain 'sourcedomain.local' Parameter set cannot be resolved using the specified named parameters. + CategoryInfo : InvalidArgument: (:) [New-MoveRequest], ParameterBindingException + FullyQualifiedErrorId : AmbiguousParameterSet,New-MoveRequest We are running a mixed environment (windows server 2003 and up with exchange 2003 and exchange 2010 (different servers obviously)) as a source domain and full Server 2008 R2 servers in the target domain with only 1 exchange 2010 server. We have ran this command on the Exchange 2010 server on the target domain and when asked giving the credentials of an admin in source domain in the format : sourcedomain\source_administrator Any help would be greatly appreciated Thanks Rhys

  Read the article

• Can we configure windows 2008 DHCP server to not ignore the broadcast falg of DHCP requests?

  - by Mathieu Pagé

  We have a Cisco WAP4410N access point that does not relay broadcast packets from the wired network to the wireless clients when the network is secured by WPA2. This cause problem with Windows server's DHCP server that respond to DHCP request by broadcasting it's OFFER instead of Unicasting it like it's asked by Windows (and Android and iOS) clients. When we had a Windows 2003 server we configured the server not to ignore the broadcast flag (following these instructions) and it solved the problem. Now we upgraded our servers to Windows 2008 servers and the problem is back. Unfortunately, it seems Windows server 2008 ignore the IgnoreBroadcastFlag parameter. Is there any other way to make sure that Windows Server 2008 respond to DHCP requests using Unicast instead of broadcast? mp

  Read the article

• PXE-E32 TFTP Open Timeout While Attempting to PXE Boot from Windows Deployment Services

  - by bschafer

  I'm running Windows Deployment Services on Windows Server 2008 R2 on top of an ESX 4.0 box. This is the only function of this VM instance, although it had previously functioned as an AD Domain Controller. My DHCP server is running on our primary Domain Controller, which is also Server 2008 R2, but running on metal. Everything was working perfectly until we recently had our backup generator fail during a power outage, causing all of our servers and networking equipment to lose power for a period of time. When we brought all of our equipment back up, everything was working as expected except for WDS. Our network is split up into several different vlans. Now, depending on which vlan the client computer is on, it's behaving differently when attempting to PXE boot into WDS. Our servers are located on the 10.55.x.x vlan, which, due to the nature of it, has no DHCP server active in it. The first computer we plugged in happened to be in the 10.99.x.x vlan, which is supposed to be reserved for network management devices (i.e. switches), but we've been using it occasionally otherwise. That computer gave us PXE-E11 ARP Timeout errors. When we moved to a different computer on the 10.19.x.x vlan (for general purpose use), it finally gets an IP from DHCP, but it presents us with a very stumping PXE-E32 TFTP Open Timeout error. Before the power outage, it didn't matter which vlan a device was on; it would PXE boot and image just fine. I've made no changes to anything server-side. Everything is configured exactly the same way it was on my WDS and DHCP servers as before the power outage. I've tried several different computers, including different models. All of this, combined with the quirky behavior depending on the vlan, makes me think something went wrong in one or more of our switches, probably because of the power outage. Unfortunately, I'm no network guy, and I know very little about how to configure our switches properly. Is this an issue with switches, etc? If so, how can I fix it? Is there some magical option I'm not aware of? Does anybody out there have any hunches? I've pretty much exhausted my ideas. Our main switch is an HP Procurve 5406. We also have 3x HP Procurve 4208 switches. The ESX Server is an HP ProLiant DL380 G6. The WDS VM is currently using the VMXNET3 network adaptor, but we've also tried the E1000 adaptor.

  Read the article

• RewriteRule and Proxy

  - by Felipe Alvarez

  Two servers. example.net, and example.com On http://example.net, My httpd.conf contains # example.net RewriteEngine On RewriteRule ^/felipetest2 http://example.com/webpage [P] I am getting a 302 Moved, which is pointing to http://example.net/webpage, but should be http://example.com/webpage What's going on? I have control over both .net and .com servers in these examples. I know I can do the same with ProxyPass and ProxyPassReverse, but I'm trying to get my head around this one. Edit: Main Question: How do I show a maintenance page, without changing URL in the browser? On same domain, or across different domains?

  Read the article

• Vim: Use different ~/.vim/plugin/ directories for different versions of vim?

  - by Stefan Lasiewski

  Like many of you, my custom Vim configuration is stored in my ~/.vimrc, with the plugins, colors, etc. stored under ~/.vim/plugins, ~/.vim/colors, etc. I want to share a single Vim configuration among many servers. Some of these servers run Vim 7, some run the older Vim 6. Most Vim plugins are intended for Vim 7, but older versions still exist for those of us on older systems. See DirDiff for an example. If I am on a system which runs Vim 6, how can I configure Vim to only use Vim 6-compatible plugins? I was thinking about storing older plugins in a subdirectory like ~/.vim/plugins6/ and keep the Vim plugins in ~/.vim/plugins, but then how can I tell Vim6 to ignore ~/.vim/plugins and use ~/.vim/plugins6 instead?

  Read the article

• w2k3 chkdsk errors as vmware 1.8 guest

  - by Sean Kirkpatrick

  We have two Dell servers (CentOS 5.x) hosting a variety of VMs including 3 W2K3 and 1 W2K servers as guests as well as a handful of other Linux guests. Each Windows VM has 2 drives, C: and D:. on 2 of the W2K3 and the W2K boxes we have recurring errors appearing on a daily basis as reported by CHKDSK. We'll run CHKDSK /f and reboot all affected machines and the errors are reported as fixed. The next day CHKDSK will report the same errors. None of the linux guests nor either host report errors when the are rebooted. The RAID controllers are not reporting errors. We're beginning to think that these are phantom errors somehow, but I'm not willing to go to the bank on that just yet. Anybody have similar experiences or advice? Thanks! Sean

  Read the article

• svn: unknown hostname for hostname that does indeed exist

  - by tipu

  I am running a centos 5 image on the vmware player and as of recently, I was able to check out from a repository that is no longer working. I am now getting: svn: Unknown hostname 'www.kennykong.com' It is a valid hostname and I know this because I have this svn location on Windows and I can browse/checkout no problem. After doing some searching I have (mostly blindly) assumed it's a DNS error because for i in 'grep nameserver /etc/resolv.conf | cut -d " " -f 2' ; do dig @$i domain.com ; done returns done ; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5 <<>> @192.168.1.1 domain.com ; (1 server found) ;; global options: printcmd ;; connection timed out; no servers could be reached I am unsure what to do from here to get my centos to recognize more servers

  Read the article

• What does it mean when ARP shows <incomplete> on eth1

  - by Geoff Dalgas

  We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps.

  Read the article

• PHP FastCGI SAPI: Reloading PHP Configuration

  - by Emre

  I am using PHP FastCGI SAPI on my web hosting environment to run PHP applications. To spawn FCGI processes I use spawn-fcgi helper program. My problem is whenever I make a change to php.ini file, I have to kill and respawn each FastCGI server for the new configuration to take effect. Is there a way to reload PHP configuration(ie. php.ini directives) without respawning each FastCGI server? I try sending hangup signal (ie. kill -HUP PHPCGIPID) to the servers but this will result in termination of the servers.

  Read the article

• Domain Controllers group not reflected in domain controllers credentials

  - by Molotch

  I set up a small testlab in vbox consisting of four servers. Two domain controllers dc01, dc02, one offline root ca and one online enterprise sub ca, ca01. All servers are based on Windows Server 2008 R2 Standard. Everything works as excpected except one thing. If I issue a certificate template with read, enroll and autoenroll rights to the security group "domain controllers" it does not let dc01 or dc02 to enumerate or enroll for the certificate. I've restarted both domain controllers several times to update their credential tokens with the correct group memberhips. So I added dc01 to the "domain computers" group and gave that group read, enroll and autoenroll rights in the template, bam, the certificate was issued. So my question is, why isn't the domain controllers group memberhips reflected in the domain controllers (dc01 and dc02) credentials? Can I view the computers credentials somehow and how should I go about trying to resolve the issue?

  Read the article

• SOLVED: network issue ubuntu 8.04 in vmware esx

  - by hoberion

  ok, this is really pissing me off I have one ubuntu 8.04 instance running on vmware (esx) which decided after a reboot to stop resolving dns requests, I also cant connect to it using ssh although I can ping the server and its really that server (when I shutdown the server the ping also stops) stuff I tried: - reboot again :) - nslookup - serverip - setting networking to dhcp - offering some cute kittens to lucifer - removing the virtual nic and adding another (to get a different mac) - migrating the instance to another esx host - drinking 20 cups of espresso - stopped all services - running dnsmasq on another server and connecting to that dns - tcpdumping - disabling ip6 symptoms: cant resolve anything nslookup just says "no servers found..." although I can ping the servers traceroute to gateway doesnt work (even with traceroute -4 -n gatewayip) collegues laughing at me any thoughts solved it: a collegue told me to upgrade/reinstall the vmware tools, I did and it solved my issue after rebooting

  Read the article

• lsyncd + csync2 : cluster of 3 or more nodes

  - by sbrattla

  I've got 3 (and potentially more) web servers hosting the same content (fronted by a load balancer). Thus, I need to make sure that files on these web servers are the same. It appears that csync2 in combination with lsyncd is able to do synchronize a cluster of nodes, but according to this article there's a problem with cyclic events in such a setup. In other words, the author writes that a file change on one machine would trigger a replication event to other machines, which again would trigger a replication event back to the original machine. It appears that this is a consequence of the setup which uses lsyncd (and inotify) to catch file modification events and from there trigger csync2 to replicate the file tree. Does anyone have experience with lsyncd in combination with csync2. Have you had trouble with cyclic events?

  Read the article

• Determine nginx reverse-proxy load limits

  - by Aaron

  Hi all: I have an nginx server (CentOS 5.3, linux) that I'm using as a reverse-proxy load-balancer in front of 8 ruby on rails application servers. As our load on these servers increases, I'm beginning to wonder at what point will the nginx server become a bottleneck? The CPUs are hardly used, but that's to be expected. The memory seems to be fine. No IO to speak of. So is my only limitation bandwidth on the NICs? Currently, according to some cacti graphs, the server is hitting around 700Kbps ( 5 min average ) on each NIC during high load. I would think this is still pretty low. Or, will the limit be in sockets or some other resource in the operating system? Thanks for any thoughts and insights. Aaron

  Read the article

• Server 2008 print server down / access denied

  - by johnnyb10

  I have two Server 2008 servers (both running as VMs in VMware). One is a Full Installation, and the other is a Server Core installation. I just installed Print Services on both of them. In Print Management on the Full server, I added the Server Core print server (so now two print servers are listed in Print Management). However, the icon for my Server Core print server has a red, down-pointing arrow (indicating that it is down, I suppose). And when I right-click it and click Add Printer, I get a message saying that access is denied. Can someone tell me how to bring up or check on the status of the Server Core print server. Obviously, I'm somewhat of a noob with this stuff. Thanks in advance...

  Read the article

• Mac OS X 10.6 issues connecting via vpn to Microsoft server

  - by chris hough

  I am currently running Mac OS X Snow Leopard and trying to use the native vpn client to connect to our Microsoft vpn server. If I route all traffic via the vpn connection I am able to connect to our servers, however, external traffic to i.e. google or stack overflow is blocked. If I uncheck the checkbox to route all traffic via the vpn I can connect to the vpn, however, I can not connect to my servers, external traffic to google or stackoverflow works though. Is this a vpn client issue, do I need to purchase Mac OS X vpn software instead of the native client, or is there a Microsoft vpn server setting that has to be checked. I am not familiar with the server software, but I wanted to post this question here to help out our network admin with the Mac OS X machines.

  Read the article

• Automated Deployment of Windows Application

  - by Phillip Roux

  Our development team are looking to automate our application deployment on to multiple servers. We need to control multiple windows servers at once (Stopping Database server & Web Server). We have a ASP.NET project, database upgrade scripts, reports and various Windows services that potentially need to be updated during deployment. Currently we use Jenkins as our CI server to run our unit tests. If something goes wrong in the deployment process, we would like the ability to roll back. What tools are recommended to automate our deployment process?

  Read the article

• AVG 9 (Internet Security Business Edition) and IIS 6.0

  - by Dave Holland

  Are any of you using AVG 9 Internet Security Business Edition along with IIS 6.0 and if so have you experienced problems? We just went from 8.5 to 9.0... Luckily I tried on only one of the servers in the web farm first to run for a week to make sure it played well with my servers. A few hours after the install all web apps were giving a "connection refused" error. Neither iisrest or restarting world wide web publishing services resolves the issue, only rebooting the machine brings the webs back up. They are all ASP.Net sites by the way (v2.5). What's interesting is if I take the machine out of the load balancer, the machine runs fine and the webs are just fine for days... as soon as i put it back in the pool it's only a few hours before its sad. The only thing I can think of right now is that the Resident Shield may be causing an issue, any thoughts?

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >