Search Results

Search found 9816 results on 393 pages for 'named conf'.

Page 92/393 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

  • Ubuntu 12.04.1 LTS and Nvidia dirver (304.51) 64bit: problem 640x480

    - by nibianaswen
    I have a problem with this configuration: Asus K55V, Ubuntu 12.04 LTS and Nvidia driver 304.51. I have remove the nouveau driver with: apt-get --purge remove xserver-xorg-video-nouveau I installed the official nvidia driver (from www.nvidia.com) but when I reboot the PC the resolution of screen is only 640x480 and the monitor is resized. Mo solution at this problem if i change the xorg.conf. Now i have uninstall the nvidia driver and reinstall with sudo apt-get purge nvidia-current sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current When I reboot the screen resolution and size is OK, but if I start nvidia-setting I received the message: You do not appear to be using the NVIDIA X driver. and with command: sudo lshw -c display | grep driver I received configuration: driver=i915 latency=0 This sound like the system is using the Intel card. When I launch command lspci | grep VGA the output is: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1058 (rev ff) And there is no /etc/X11/xorg.conf. I have read a lot of guides on internet but without success.. How i can use nvidia card with the driver that i have installed?

    Read the article

  • JEOS

    - by john.graves(at)oracle.com
    JEOS stands for Just Enough Operating System.  It is  great environment for building virtual machines without all the clutter of a windowing system, games, office products, etc.  It is from Ubuntu and you install it using the Ubuntu server install, but rather than picking a standard install, press F4 and choose “Install a minimal system.” Note: The “Install a minimal virtual machine” is specific to VMWare and I plan to use VirtualBox. Be sure to include Open SSH in the install so that it installs sshd. *** Also, if you plan to install XE, you’ll need to modify the partitions to have a larger swap space (at least 1.5 G). *** Once the install is done, I find it useful to install a few other items. Update Ubuntu apt-get update Install some other tools apt-get openjdk-6-jre Yes, java will be included in any of the WebLogic installs, but I need this one if I want to do remote display (for config wizards, etc). apt-get gcc Some apps require to rebuild the kernel modules, so you’ll need a basic compiler. Install guest additions (Choose the VirtualBox Devices->Install Guest Additions…” option.  This sets up a /dev/cdrom or /dev/cdrom1.  You’ll need to manually mount this temporarily: sudo mount /dev/cdrom /mnt Then run the linux .bin file. Update nofile limits.  Most java apps fail with the standard ubuntu settings: edit /etc/security/limits.conf and add these lines at the end: *     soft nofile 65535 *     hard nofile 65535 root  soft nofile 65535 root  hard nofile 65535 These numbers are very high and I wouldn’t do this on a production system, but for this environment it is fin. To get rid of the annoying piix error on boot, add the following line to the /etc/modprobe.d/blacklist.conf file blacklist i2c_piix4

    Read the article

  • Live Updates in PrimeFaces Line Chart

    - by Geertjan
    In the Facelets file: <p:layoutUnit position="center"> <h:form> <p:poll interval="3" update=":chartPanel" autoStart="true" /> </h:form> <p:panelGrid columns="1" id="chartPanel"> <p:lineChart xaxisLabel="Time" yaxisLabel="Position" value="#{chartController.linearModel}" legendPosition="nw" animate="true" style="height:400px;width: 1000px;"/> </p:panelGrid> </p:layoutUnit> The controler: import java.io.Serializable; import javax.inject.Named; import org.primefaces.model.chart.CartesianChartModel; import org.primefaces.model.chart.ChartSeries; @Named public class ChartController implements Serializable { private CartesianChartModel model; private ChartSeries data; public ChartController() { createLinearModel(); } private void createLinearModel() { model = new CartesianChartModel(); model.addSeries(getStockChartData("Stock Chart")); } private ChartSeries getStockChartData(String label) { data = new ChartSeries(); data.setLabel(label); for (int i = 1; i <= 20; i++) { data.getData().put(i, (int) (Math.random() * 1000)); } return data; } public CartesianChartModel getLinearModel() { return model; } } Based on this sample.

    Read the article

  • Subdomain redirect to WWW

    - by manix
    I have the domain example.com and the test.example.com running on apache server. For some reason when I try to visit test.example it is redirected to www.test.example and by consequence a Server not found error is displayed in the browser. Both .htaccess (root and subdomain folder) files are empty. Additional facts I have another subdomain xyz.example.com pointed to public_html/xyz directory with some content inside (index.html with "hello world message") and it works fine if I use xyz.example.com instead of www.xyz.example.com. So, can you help me to point to the right direction in order. I have a vps and I am able to change any file if is required. Below you can find my virtual host configuration. <VirtualHost xx.xxx.xxx:80> ServerName test.example.com ServerAlias www.test.example.com DocumentRoot /home/example/public_html/test ServerAdmin [email protected] UseCanonicalName Off CustomLog /usr/local/apache/domlogs/test.example.com combined CustomLog /usr/local/apache/domlogs/test.example.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." ScriptAlias /cgi-bin/ /home/example/public_html/test/cgi-bin/ # To customize this VirtualHost use an include file at the following location # Include "/usr/local/apache/conf/userdata/std/2/example/test.example.com/*.conf" </VirtualHost>

    Read the article

  • How do you run XBMC on nvidia dual screen and stop it from taking over the keyboard and mouse?

    - by Paul Swartout
    I have set up dual screen under Ubuntu 12.04. I have a GeForce 8500 GT and have used the nVidia control panel to set up dual screen in "Separate screen mode". Here's the resulting xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Maxdata/Belinea B1925S1W" HorizSync 31.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "CRT-1: 1280x768 +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-1: 1360x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection All well and good and I have a nice blank XWindow displayed on my TV (the 2nd monitor). I then fire up XBMC from a terminal on the PC monitor using DISPLAY=:0.1 xbmc XBMC fires up quite nicely on the TV however I can no longer use the main PC monitor / mouse / keyboard as XBMC on the TV screen seems to have focus. I was hoping to have XBMC running on the TV and let the kids use the MCE remote whilst I get on with my work on the PC monitor. Does anyone have any idea how to overcome this? I'm presuming there's some xorg.conf fun and games needed but I've no idea where to start to be honest.

    Read the article

  • Existing laravel 4 project gives 404 in browser

    - by Richard A
    I'm trying to set up a development environment on a virtual machine running Ubuntu 14.04 LTS using Nginx and HHVM. To do this, I followed the tutorial here. This goes well with a new installation of Laravel. But when I import an existing Laravel 4 project and try to open that on my actual machine (which will serve as the client running Windows 7), I'm getting a 404 File Not Found error on the screen while connecting to http://sav.savrichard.dev. I did add this to the hosts file with the correct IP Address. The virtual machine is receiving the request and responds with a 404 error. How do I solve this error? I'm pretty new to Ubuntu so I'm not exactly sure what's wrong. The project is located at /var/www/sav.savrichard.net The server configuration is as follow: server { listen 80 default_server; root /var/www/sav.savrichard.net/public; index index.html index.htm index.php; server_name sav.savrichard.dev; access_log /var/log/nginx/localhost.sav.savrichard.dev-access.log; error_log /var/log/nginx/localhost.sav.savrichard.dev-error.log error; charset utf-8; location / { try_files \$uri \$uri/ /index.php?\$query_string; } location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { log_not_found off; access_log off; } error_page 404 /index.php; include hhvm.conf; # Deny .htaccess file access location ~ /\.ht { deny all; } } And the hhvm.conf file is: location ~ \.(hh|php)$ { fastcgi_keep_conn on; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; }

    Read the article

  • mount issue in ubuntu 12.10

    - by Vipin Ms
    I'm having issue with latest Ubuntu 12.10. Let me make it more clear. I'm having the following partitions in my Laptop. Device Boot Start End Blocks Id System /dev/sda1 2048 39997439 19997696 83 Linux /dev/sda2 * 40001850 81947564 20972857+ 83 Linux /dev/sda3 81947565 123877214 20964825 83 Linux /dev/sda4 123887614 976773119 426442753 5 Extended /dev/sda5 123887616 333602815 104857600 83 Linux /dev/sda6 333604864 543320063 104857600 83 Linux /dev/sda7 543322112 753037311 104857600 83 Linux /dev/sda8 753039360 976773119 111866880 83 Linux I have also two users named "ms" and abc. Here ms is for administrative tasks and abc for my friends. When I mount any drive under "abc" user, I cannot access it under my other user "ms". Same as in the case with "ms" user. I found possible reason behind the issue. When I mount any drive under "abc" user, Ubuntu will try to mount it under "/media/abc/volume_name" instead of "/media/volume_name" . Same as in the case with "ms" user. # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 19G 11G 7.5G 59% / udev 1.5G 4.0K 1.5G 1% /dev tmpfs 599M 896K 598M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.5G 620K 1.5G 1% /run/shm none 100M 92K 100M 1% /run/user /dev/sda2 20G 172M 19G 1% /media/abc/TEST /dev/sdb1 466G 353G 114G 76% /media/abc/F088F74288F7063E /dev/sdb2 466G 318G 148G 69% /media/abc/New Volume /dev/sda5 99G 94G 323M 100% /media/abc/Songs /dev/sda6 99G 31G 63G 34% /media/ms/Films Here, you can see that "TEST" was mounted under "/media/abc/TEST". When I try to access the already mounted partition named '/media/abc/TEST" in my "ms" session I'm getting the following error. How to fix this error? Is it a bug? Is there any way to fix this without modifying the underlying file-system structure?

    Read the article

  • Intel N10 graphics

    - by Rapsag1980
    Español: Buen día. Instalé en una notebook ubuntu 12.04 pero me da el problema que solamente me da dos resoluciones de pantallas 800x600 y 1024x768... En la primera se ve muy grotesca la pantalla y en la segunda se ve bien, pero falta un pedazo de pantalla arriba y abajo... He tratado de buscar información sobre el tema pero parece uno de esos "bugs" que no han conseguido ser erradicados... Intenté hacer el Xorg.conf y esas cosas y nomas no se puede... Recurro a su sapiencia y experiencia en este tipo de problemas... La mini es una Lanix Neuron lt, procesador intel atom n450 y la tarjeta Intel corporation N10 family integrated graphics controller.... Inglés: Good day. I installed ubuntu 12.04 on a notebook but I get the problem that only gives me two screen resolutions of 800x600 and 1024x768 ... The first screen looks very grotesque and the second looks good, but missing a piece of screen up and down ... I tried to find information on the subject but it seems one of those "bugs" that have failed to be eradicated ... I tried to do the Xorg.conf nomas and stuff and you can not ... I appeal to your wisdom and experience in this kind of problem ... The mini is a Neuron Lanix lt, Intel Atom N450 processor and the Intel integrated graphics family corporation N10 controller ....

    Read the article

  • Are null references really a bad thing?

    - by Tim Goodman
    I've heard it said that the inclusion of null references in programming languages is the "billion dollar mistake". But why? Sure, they can cause NullReferenceExceptions, but so what? Any element of the language can be a source of errors if used improperly. And what's the alternative? I suppose instead of saying this: Customer c = Customer.GetByLastName("Goodman"); // returns null if not found if (c != null) { Console.WriteLine(c.FirstName + " " + c.LastName + " is awesome!"); } else { Console.WriteLine("There was no customer named Goodman. How lame!"); } You could say this: if (Customer.ExistsWithLastName("Goodman")) { Customer c = Customer.GetByLastName("Goodman") // throws error if not found Console.WriteLine(c.FirstName + " " + c.LastName + " is awesome!"); } else { Console.WriteLine("There was no customer named Goodman. How lame!"); } But how is that better? Either way, if you forget to check that the customer exists, you get an exception. I suppose that a CustomerNotFoundException is a bit easier to debug than a NullReferenceException by virtue of being more descriptive. Is that all there is to it?

    Read the article

  • Why is apt-cache so slow?

    - by Damn Terminal
    After upgrade to Trusty (14.04) from Saucy (13.10), all apt operations are very slow. Even those that do not include downloading anything, or connecting to any servers. For example, displaying the apt policy # time apt-cache policy [...] real 0m8.951s user 0m5.069s sys 0m3.861s takes almost ten seconds! Mostly a weird lag right after issuing the command. And it's the same even if I issue the same command again. On another system it doesn't take a tenth of a second real 0m0.096s user 0m0.070s sys 0m0.023s The other system is a little beefier but there was no noticeable difference before the upgrade. It's the same with apt-get, anything apt-related. How do I find out the source of this lag and fix it? Additional info: # cat /etc/nsswitch.conf # /etc/nsswitch.conf # # Example configuration of GNU Name Service Switch functionality. # If you have the `glibc-doc-reference' and `info' packages installed, try: # `info libc "Name Service Switch"' for information about this file. passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis BTW is my understanding of how apt-cache works correct? It doesn't make any network connections when I run apt-cache policy, right? In case I'm wrong and it matters, here are my sources https://gist.github.com/anonymous/02920270ff68e23fc3ec

    Read the article

  • radeon display driver clones monitors while using Xinerama

    - by gregmuellegger
    I'm trying to get my two Radeon HD 4770 cards working with three monitors. Xinerama works so far in the way that I have two fully working monitors were I can move windows from one to the other. My problem now is that my third monitor is a clone of my second monitor (displaying the exact same thing). These monitors are connected to the same graphic card ("Screen Middle" and "Screen Right" in the xorg.conf below). Here is my xorg.conf: Section "ServerLayout" Identifier "ThreeMonitors" Screen "Screen Left" 0 0 Screen "Screen Middle" RightOf "Screen Left" Screen "Screen Right" RightOf "Screen Middle" Option "Xinerama" EndSection Section "Monitor" Identifier "Monitor Left" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Middle" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Right" Option "DPMS" EndSection Section "Device" Identifier "Device Left" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:3:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Left" Device "Device Left" Monitor "Monitor Left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Middle" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Middle" Device "Device Middle" Monitor "Monitor Middle" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Right" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:1" Screen 1 EndSection Section "Screen" Identifier "Screen Right" Device "Device Right" Monitor "Monitor Right" SubSection "Display" Depth 24 EndSubSection EndSection I'm using a fresh Kubuntu 10.10 installation with propsed-updates enabled since this repo contains a xorg fix for using multiple graphic cards. I hope someone can help me out. Very many thanks!!

    Read the article

  • Nvidia GeForce Gt-520M-cn on intel dh61ww Ubuntu 12.04

    - by j goseeped
    hi people i hope you can help a little bit , i appreciate your time look: i have a this desktop i7 2600, 8gb ram ddr3, board intel dh61ww, Geforce Nvidia GT520-cn 2Gb ddr3, i just install ubuntu 64bits 12.04 kernel 3.2.0-23-generic , i want to setup two monitors samsung led 22" and get start mi video card 1) i download and installed nvidia driver 295.59 and also try with 302.17 to apt-update and upgrade, apt-get install build-essential linux-headers-$(uname -r), apt-get remove --purge nvidia*, apt-get remove --purge xserver-xorg-video-nouveau, vim /etc/modprobe.d/blacklist.conf blacklist vga16fb blacklist nouveau blacklist rivafb blacklist nvidiafb blacklist rivatv sh NVIDIA.run, sudo service lightdm start, reboot, nvidia-xorgconf 2)after reboot i get 800x600 and nvidia-settings say this. You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. 3) i change a little bit xorg.conf to set up a resolution to work property 4) i dont have any image in the monito and i dont have any option on Nvidia X server settings lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520] (rev a1) egrep -i 'glx|nvidia' /var/log/Xorg.0.log [ 12.005] (II) LoadModule: "glx" [ 12.005] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12.575] (II) Module glx: vendor="NVIDIA Corporation" [ 12.585] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012 [ 12.585] (II) Loading extension GLX [ 13.037] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9) glxinfo | grep direct Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig sorry my english is no very well. and thanks guys

    Read the article

  • Xorg crashes ever since using Nvidia dual monitors

    - by legion
    Well ever since I have used dual monitors with the NVIDIA X Server Settings program my xorg process has been crashing after a while, and its generally a pretty long while of like 6 hours afterwards. Before NVIDIA changed my xorg.conf file I only had xorg crash like twice in 2 months, I can't figure out what is going on. I am running ubuntu 12.04 with the MATE desktop environment v 1.2.0 xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LEN" HorizSync 51.8 - 55.8 VertRefresh 40.0 - 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "NVS 3100M" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0, CRT: nvidia-auto-select +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinViewXineramaInfoOrder" "DFP-1" Option "TwinView" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Windows domain full hostnames cannot be resolved resulting in intranet not working

    - by OpethR
    the domain: is foo.bar.local full hostname is: bla.foo.bar.local short hostname is: bla I installed winbind. here is my smb.conf: name resolve order = lmhosts host wins bcast here is my nsswitch.conf: hosts: files mdns4_minimal [NOTFOUND=return] dns wins mdns4 when I try to ping full hostname, I get: "ping: unknown host" when I ping short hostname it works and shows me PING bla.foo.bar.local (10.11.20.135) 56(84) bytes of data. 64 bytes from bla.foo.bar.local (10.11.20.135): icmp_req=1 ttl=62 time=49.7 ms *notice that it manages to get the full hostname!? :S now the only reason I need it is cuz I'm trying to reach intranet websites. when I type short hostname "bla" in firefox address bar, it automatically changes it to the full hostname (which is good, right?!) but then it says: Server not found Firefox can't find the server at bla.foo.bar.local. what am I doing wrong? it's driving me nutz. so if you are wandering then yes, it is company intranet I'm trying to reach from ubuntu. If I use my crappy winxp everything is working perfectly well.

    Read the article

  • Deploying InfoPath forms &ndash; idiosyncrasies

    - by PointsToShare
    Well, I have written a sophisticated PowerShell script to expedite the deployment of InfoPath forms - .XSN file.  Along the way by way of trial and error (mostly error and error), I discovered a few little things. Here they are. •    Regardless of how the install command is run – PowerShell or the GUI in Central Admin – SharePoint enwraps the XSN inside a solution – WSP, then installs and deploys the solution. •    The solution is named by concatenating “form-“ with the first 16 characters (or less if the file name is shorter than 16) of the file name and the required WSP at the end. So if the form name was MyInfopathForm.xsn the solution name will be form-MyInfopathForm.wsp, but for WithdrawalOfRequestsForRefund.xsn it will be named form-WithdrawalOfRequ.wsp •    It only gets worse! Had there already been a solution file with the same name, Microsoft appends a three digit number to the name, like MyInfopathForm-123.wsp. Remember a digit is a finger, I suspect a middle finger, so when you deploy the same form – many versions of it, or as it was in my case – testing a script time and again, you’ll end up with many such digit (middle finger) appended solutions, all un-deployed except the last one. This is not a bug. It’s a feature!   Well, there are ways around it. When by hand, remove the solution from the solution store before deploying the form again. In the script I do the same thing. And finally - an important caveat; Make sure that all your form names are unique in the first 16 characters. If you also have a form with the name forWithdrawalOfRequestForRelief.xsn, you’re in trouble! That’s all folks!

    Read the article

  • htaccess and htpasswd trouble

    - by hjpotter92
    This is the first time that I have ever tried working with .htpasswd and .htaccess files, so please point out my childish works. I have my apache document root set to /www/ on my debian server. Inside it, there's a folder named Logs/ which I want to restrict access using a htpasswd. I created my htpasswd file using the shell's htpasswd command. And this is the result: > user:<encoded password here> > hjp:<encoded password here> > hjpotter92:<encoded password here> I put this file named .htaccess inside /www/. The Logs/ has following htaccess file in it: > AuthName "Restricted Area" > AuthType Basic > AuthUserFile /www/.htpasswd > AuthGroupFile /dev/null > require valid-user This was again created using an online tool(I forgot its name/link, and can't search the browser-history now). The problem, as it might've already struck you is that I am experiencing no change on my Logs folder access. The folder is still accessible to everyone. I am running apache as root user(if that matters/helps). Please help/guide me. I've tried reading some htaccess guides and have followed some of older SO questions, but still haven't figured out a way to restrict access to Logs folder with a password.

    Read the article

  • Boundary conditions for testing

    - by Loggie
    Ok so in a programming test I was given the following question. Question 1 (1 mark) Spot the potential bug in this section of code: void Class::Update( float dt ) { totalTime += dt; if( totalTime == 3.0f ) { // Do state change m_State++; } } The multiple choice answers for this question were. a) It has a constant floating point number where it should have a named constant variable b) It may not change state with only an equality test c) You don't know what state you are changing to d) The class is named poorly I wrongly answered this with answer C. I eventually received feedback on the answers and the feedback for this question was Correct answer is a. This is about understanding correct boundary conditions for tests. The other answers are arguably valid points, but do not indicate a potential bug in the code. My question here is, what does this have to do with boundary conditions? My understanding of boundary conditions is checking that a value is within a certain range, which isn't the case here. Upon looking over the question, in my opinion, B should be the correct answer when considering the accuracy issues of using floating point values.

    Read the article

  • External Full HD monitor and Virtual Desktop Size

    - by Stefan
    I have two FullHD monitors attached to my ATI graphics card [2]. The resolution of both of them is detected properly without any modifications to /etc/X11/xorg.conf. I can run both of them in clone mode. However, when I try to run them next to each other, I got the following error: The selected configuration for displays could not be applied. If tried to fix this according to [1]. My xorg.conf now looks like this: Section "Module" Load "glx" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" # The 1088 is the smallest multiple of 32 >= 1088 # see manpages Virtual 1920 1088 EndSubSection EndSection This does not seem to be parsed properly. After restarting X, I cannot set resolutions beyond 1600 or so any more. /var/log/Xorg.0.log gives: [ 15.676] (II) fglrx(0): Not using mode "1920x1080" (width too large for virtual size) [ 15.676] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size) Are my modifications syntactically incorrect? According to the man page, it should be fine. Any ideas? OS: Ubuntu 11.10 64bit [1] http://askubuntu.com/a/75546/5023 [2] 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]

    Read the article

  • Using onboard and pci-e graphics card at the same time

    - by Endle
    Hello wonderful people. I know there are several other posts with similar questions. I also know how to use Google. I also have read up on posts discussing bumblebee, crossfire, ati catylist and many other interesting topics. I would just like someone to give me advice on how to use the onboard and pci-e graphics at the same time. I know the computer is capable of doing this. It works in Windows. I can use the VGA and DVI onboard port and the HDMI port of the add on card all at the same time. Works great in Windows 7, In Ubuntu, it seems only one or the other will work. I can use any combination of two displays on either adapter: VGA and HDMI..HDMI and DVI..so forth and so on. I have started experimenting with xorg.conf files, but have not been able to get any of them to work. Here is my last attempt at writing an xorg.conf file: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" Screen 2 "Screen2" LeftOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Device" Identifier "Onboard Video" Driver "radeon" BusID "PCI:01:05.0" EndSection Section "Device" Identifier "Graphics Card" Driver "radeon" BusID "PCI:02:00.0" EndSection Section "Monitor" Identifier "CRT2" Option "VendorName" "ViewSonic" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DVI1" VendorName "ACR" ModelName "P224W" Option "DPMS" EndSection Section "Monitor" Identifier "DVI2" Option "VendorName" "Acer" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "Screen0" Device "Onboard Video" Monitor "CRT2" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Graphics Card" Monitor "DVI1" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection

    Read the article

  • How do I get HDMI output working on a Dell XPS 15 L502x?

    - by Jones
    Recently I've bought my dream's notebook, a Dell XPS 15 but since then this dream became a kind of endless nightmare. I'm almost getting crazy to make my graphic card driver work properly, but it seems to be just impossible. Yes, I have a 2GB NVIDIA GeForce GT 540m (Optimus) in it! It simply doesn't work. Every time I generate the xorg.conf Ubuntu hangs on while starting up, which forces me to remove this file to be able to start the notebook with the standard graphic settings. Another problem is that the Dell XPS 15 does NOT have a VGA output, but a HDMI. So, to be able to use a second monitor I have to configure it by the NVIDIA X Server Settings, which just works if the driver is properly initialized with the xorg.conf. I've also tried to make it work with the Bumblebee, but unfortunately it didn't help me much with the HDMI output. Do you guys have any idea to solve this deadlock? Is there any way for me to use my second monitor?

    Read the article

  • .NET XPath Returns No Results

    - by Stacy Vicknair
    When using XPath in .NET one of the gotchas to be aware of is that all namespaces must be named, otherwise you’ll end up with no results. Default namespaces that are specified with xmlns alone still need to be recognized in the XPath query! Say I had a bit of XML like what is returned from the QueryService web service in Sharepoint: 1: <?xml version="1.0" encoding="UTF-8"?> 2: <ResponsePacket xmlns="urn:Microsoft.Search.Response"> 3: <Response> 4: <Range> 5: ... 6: <Results> 7: <Document xmlns="urn:Microsoft.Search.Response.Document" relevance="849"> 8: ...   When consuming and navigating this response with XPath it is necessary to name all namespaces. Then those named namespaces must be used in reference to the individual element being requested (i.e. doc:Document). In VB: 1: Dim xdoc = new XPathDocument(reader) 2: Dim nav = xdoc.CreateNavigator() 3: Dim nsMgr = new XmlNamespaceManager(nav.NameTable) 4: nsMgr.AddNamespace("resp", "urn:Microsoft.Search.Response") 5: nsMgr.AddNamespace("doc", "urn:Microsoft.Search.Response.Document") 6:  7: Dim results = nav.Select("//doc:Document", nsMgr)   In C#: 1: var xdoc = new XPathDocument(reader); 2: var nav = xdoc.CreateNavigator(); 3: var nsMgr = new XmlNamespaceManager(nav.NameTable); 4:  5: nsMgr.AddNamespace("resp", "urn:Microsoft.Search.Response"); 6: nsMgr.AddNamespace("doc", "urn:Microsoft.Search.Response.Document"); 7:  8: var results = nav.Select("//doc:Document", nsMgr);

    Read the article

  • Wine causes twin view to break

    - by deanvz
    I have endlessly been playing around with the Nvidia X Server settings and changing my xorg.conf file to try and work for me and on most days its fine. In each instance I get it working for a while and then this morning the most bizarre thing happens. The moment I open any type of Wine program (which never use to be a problem) my Twin View setup disappears and am left with mirrored displays. I try and change the settings in the Nvidia driver, but its not interested and the screens remain mirrored. I have a work around. Restart my pc... Below are the contents of my current xorg.conf file. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:43:34 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LG Electronics W1934" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9400 GT" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1440+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Ubuntu 14.04: Fine tuning Touchpad for ThinkPad S431

    - by ramgorur
    I am using Ubuntu 14.04 on Lenovo ThinkPad S431. The touchpad is very bumpy, tricky to use. Slides down with a small touch, sometimes jerks erratically. I have tried to modify the settings in /usr/share/X11/xorg.conf.d/50-synaptics.conf file as below -- Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "JumpyCursorThreshold" "250" Option "VertResolution" "100" # Option "HorizResolution" "65" # Option "MinSpeed" "1" # Option "MaxSpeed" "1" # Option "AccelerationProfile" "1" # Option "AdaptiveDeceleration" "8" # Option "ConstantDeceleration" "1" # Option "VelocityScale" "128" Option "HorizHysteresis" "150" Option "VertHysteresis" "150" EndSection There are lots of options here, does anyone know how to get a fine-tuned values for the above options (for ThinkPad S431)? The Hysteresis values seems to alleviate the problem a little bit, but failed to get a perfect result. EDIT: According to this bug report for ThinkPad X230 (+X230t), I set these values and quite good for now -- Option "VertResolution" "100" Option "HorizResolution" "65" Option "MinSpeed" "1" Option "MaxSpeed" "1" Option "AccelerationProfile" "2" Option "AdaptiveDeceleration" "16" Option "ConstantDeceleration" "16" Option "VelocityScale" "32" Option "HorizHysteresis" "50" Option "VertHysteresis" "50" and then you need to increase the cursor speed manually from the Unity mouse settings. But I am still looking for a fully functional (possibly with all the gestures) and a fine-tuned touchpad settings for S431. Further help is appreciated.

    Read the article

  • How can I redirect all files in a directory that doesn't conform to a certain filename structure?

    - by user18842
    I have a website where a previous developer had updated several webpages. The issue is that the developer had made each new webpage with new filenames, and deleted the old filenames. I've worked with .htaccess redirects for a few months now, and have some understanding of the usage, however, I am stumped with this task. The old pages were named like so: www.domain.tld/subdir/file.html The new pages are named: www.domain.tld/subdir/file-new-name.html The first word of all new files is the exact name of the old file, and all new files have the same last 2 words. www.domain.tld/subdir/file1-new-name.html www.domain.tld/subdir/file2-new-name.html www.domain.tld/subdir/file3-new-name.html ect. We also need to be able to access the url: www.domain.tld/subdir/ The new files have been indexed by google (the old urls cause 404s, and need redirected to the new so that google will be friendly), and the client wants to keep the new filenames as they are more descriptive. I've attempted to redirect it in many different ways without success, but I'll show the one that stumps me the most RewriteBase / RewriteCond %{THE_REQUEST} !^subdir/.*\-new\-name\.html RewriteCond %{THE_REQUEST} !^subdir/$ RewriteRule ^subdir/(.*)\.html$ http://www.domain.tld/subdir/$1\-new\-name\.html [R=301,NC] When visiting www.domain.tld/subdir/file1.html in the browser, this causes a 403 Forbidden error with a url like so: www.domain.tld/subdir/file1-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name-new-name.html I'm certain it's probably something simple that I'm overlooking, can someone please help me get a proper redirect? Thanks so much in advance! EDIT I've also got all the old filenames saved on a separate document in case I need them set up like the following example: (file(1|2|3|4|5)|page(1|2|3|4|5)|a(l(l|lowed|ter)|ccept)

    Read the article

  • How do I get dynamic subdomains on domain aliases in Plesk? [closed]

    - by mitchdesign
    I am running a site that is available via many domains. So all domains depend on the same code, but depending on the requested domain, the correct information is shown to the user. In Plesk, I have one domain set up and it has domain aliases for all the others. This works ok. Now, I'd like to be able to use subdomains on those aliased domains. Like the domains, the subdomains will be used as input for the system to display the correct information. So, they are not a fixed set. What I have done: - In DNS I have added *.example.com CNAME example.com to the main domain. This is automatically copied by Plesk to all the aliases. So DNS-wise, I think it's ok. - I have added a vhost.conf file to the main domain, containing ServerAlias *.maindomain.tld. This works for the main domain. But still, not for the aliased domains. And there is no place to put vhost.conf files for the aliased domains.. How do I tell the server to respond to those domain's subdomains as well?

    Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >