cable modem - Page 93 - Developer IT

issues with ASUS S301L ultrabooks

- by Wuerze

I just like to tell you what still is a Problem in Ubuntu 14.04 and should be solved for a nice experience of this distribution. Unfortunately I do not have any hints to tell you, because I am just a user and know not much about programming. Anyway, I hope it helps. 1) Intel open source Graphics issues (proprietary) -when attaching HDMI-cable the screen switches to the external monitor and it's fine, but there is no switching back unless restart with HDMI deattached -black screen appears for like 2 seconds as if I would change screen in the settings; frequency increases with intensity of driver use (i.e. videos or video games) 2) hotkeys (commonly recognised) -there is no possibility to adjust brightness with the hotkeys (Fn+F5 and Fn+F6) 3) touchscreen (commonly recognised) -the touchscreen is behaving like a mouse -configuring gestures for the multi touch screen seems to always end in disabling touch pad gestures 4) panel symbols -battery symbol has got a low accuracy while it determines accurately the energy left; only 5 steps of energy are shown by the symbol Thank you all for participating in the solution of these problems! I will stay tuned and edit this list if something has been solved.

Read the article

Wired card not connecting after trying to connect

- by Mike

I have an Ubuntu 12.10 PC. When I plug in my internet cable it starts connecting and after a minute it says it can't connect. I tried different cables but nothing works. Wlan works. I think it's the network driver but I don't know how to install/update it. Here's the ifconfig info (if it helps): eth0 Link encap:Ethernet HWaddr 00:01:6c:39:2a:8d inet6 addr: fe80::201:6cff:fe39:2a8d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2011 errors:0 dropped:362 overruns:0 frame:0 TX packets:586 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:175452 (175.4 KB) TX bytes:147211 (147.2 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9779 errors:0 dropped:0 overruns:0 frame:0 TX packets:9779 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8460080 (8.4 MB) TX bytes:8460080 (8.4 MB) wlan0 Link encap:Ethernet HWaddr 08:10:74:35:99:9d inet6 addr: fe80::a10:74ff:fe35:999d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1790 errors:0 dropped:0 overruns:0 frame:0 TX packets:3250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:401664 (401.6 KB) TX bytes:2898773 (2.8 MB)

Read the article

Kubuntu not showing eth0

- by Laurbert515

I just installed Kubuntu 12.04.2 and do not have an internet connection. I also cannot access the Desktop and only have the terminal. When I enter xlcock I get Error: Can't open display:. I believe this is because I do not have the correct drivers and need to download them ... using the internet which I can't access. So here's what's going on ... ifconfig gives: lo Link ecap: Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:0 RX bytes:1296 (1.2 KB) TX bytes:1296 (1.2 KB) wlan0 Link encap: Ethernet HWaddr 68:17:29:58:49:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lspci -nnk gives: 07:00.0 Network Controller [0280] Intel Corporation Centrino Wireless-N 2230 [8086:0887] (rev c4) Subsystem: Intel Coporation Centrino Wireless-N 2230 BGN [8086:4062] Kernel driver in use: iwlwifi Kernel modules: iwlwifi 0d:00.0 Ethernet Controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 10) Subsystem: Toshiba America Info Systems Device [1179:fa77] I believe this means that it is using the ethernet connection but thinks it is a wireless connection. sudo lshw -class network gives: *-network description: Wireless interface product: Centrino Wireless=N 2230 ... *network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet I want to get the internet working so I can fix the GPU driver, etc. but I can't seem to get it working even though I have my ethernet cable plugged in (and I'm sure it is working).

Read the article

External monitor on old Dell 700m?

- by Adam Henne

Okay, linux noob. I installed 10.04 on an old Dell 700m in hopes of using it as a media center device. That seems to work great, except now it won't output to the external monitor. VGA cable works fine, TV recognizes other computers fine, it's the laptop that won't output. Turns out that the 700m, unlike every other computer out there, doesn't have a Fn hotkey to switch monitors. The only way to do it in Windows was to go through the Control Panel. In Ubuntu, though, the Monitor setup won't detect or recognize any monitors. The laptop display works fine, but I can't adjust or add anything. I did a little research and found suggestions for older Ubuntu builds involving the xorg.conf. I tried one out, in spite of my unfamiliarity, and it's screwed the whole display big time. I can fix that with a clean reinstall, that's no problem, but I'm cautious about editing xorg again. Any suggestions? Thank you!

Read the article

WIFI/LAN not working after Installing Ubuntu 13.10

- by user183025

I can't connect to my WIFI after installing Ubuntu 13.10. I tried re-installing it three times (thinking that I did something wrong during the installation) but I still can't connect to my WIFI. It just gives me the message that I'm offline and that I can't connect to my WIFI. I also tried connecting to the internet using LAN cable but with the same results. I tried google but it seems that there's no solution to this yet.... Anybody knows how to solve this? Thanks! FYI: H/W path Device Class Description ====================================================== system RC530/RC730 (To be filled by O.E.M.) /0 bus RC530/RC730 /0/0 memory 64KiB BIOS /0/4 processor Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz /0/4/5 memory 32KiB L1 cache /0/41 memory 4GiB System Memory /0/41/0 memory DIMM [empty] /0/41/1 memory 4GiB SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) /0/100 bridge 2nd Generation Core Processor Family DRAM Controller 02:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34) Subsystem: Intel Corporation Centrino Wireless-N 130 BGN Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7200000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) Subsystem: Samsung Electronics Co Ltd Device c0c1 Flags: bus master, fast devsel, latency 0, IRQ 41 I/O ports at b000 [size=256] Memory at f2104000 (64-bit, prefetchable) [size=4K] Memory at f2100000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169

Read the article

Automatic switching between monitor configurations

- by Michael Aquilina

I have a laptop and an external monitor and i was wondering if there was a simple approach to switching between multiple monitor configurations based on the detected available displays. For example: When i am at home and i plug in my external monitor i would like this to automatically become enabled and the laptop screen to become disabled. As soon as i pull out the display cable for the external monitor, i would like the laptop screen to automatically become enabled. I was expecting this to just "work" just like it does in windows - but it seems to be much harder than that. I am aware of the xrandr command to turn displays on and off but i cannot seem to find a way to get this to work the way i describe above. I had also found this post about switching between multiple monitor configurations and the results seem a bit inconclusive. However i was hoping that with xrandr there would be a simpler solution. For me, the fact that when i pull out my external monitor the screen just goes black and i get an error message is a big issue holding me back from making the complete switch to linux as i move around alot as a student. My OS of choice is currently Kubuntu 12.04 but i am willing to change to something else if it provides a better way of setting up the described setup.

Read the article

Wired connection not working

- by YokoBlac

I am using a Acer Aspire One. Here is the Ubuntu Wiki Page about my computer. I have a working wireless connection however when I plug a cat5 (Ethernet) cable in the lights flicker on the computer, but then nothing happens. Output of iconfig: eth0 Link encap:Ethernet HWaddr 00:1e:68:96:1a:6b inet6 addr: fe80::21e:68ff:fe96:1a6b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:43 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2622 (2.6 KB) TX bytes:936 (936.0 B) Interrupt:28 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) wlan0 Link encap:Ethernet HWaddr 00:22:68:92:7f:36 inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::222:68ff:fe92:7f36/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5702 errors:0 dropped:0 overruns:0 frame:0 TX packets:5284 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4117327 (4.1 MB) TX bytes:936709 (936.7 KB) Any understanding of this output is greatly appreciated.

Read the article

Accidentally Changed Dual Monitor Setup and don't know how to reset it

- by user203783

I have a dual monitor setup with my laptop and an external Asus monitor running under Ubuntu 11.10. When I first started using Ubuntu, it synced both screens. What showed up on my laptop showed up on my eternal monitor. Last night, I accidentally knocked the HDMI cable from its port (not that unusual in the tight space I work in). When I plugged it back in, as usual, the external monitor only displayed my wallpaper. Usually, I just restart Ubuntu and it resets, but last night what I now realize was the display console came up and somehow I changed the setup. Now the two screens show different jobs so to speak. Also, the external monitor doesn't display the ribbon, making switching between Firefox tabs and windows or apps jarring. I write for a living and need to quickly check bits of research, notes or sources while writing and the extra switching between mouse pad and external mouse to get one or the other screen to respond interrupts my work flow. The only technical help I can offer is when the display console popped up, the graphical representation of the screens was that the external screen appeared layered over by about one-quarter of the laptop screen. Again, these were icons. I tried to replicate that after I obviously screwed things up. If someone could help. I would appreciate it. If I have to use terminal, that's fine. I started using computers for writing back when they were green DOS prompts. There's a certain elegance to prompt commands to me. Maybe it's the writer in me. Again, if anyone can help me return my screens to sync under Ubuntu 11.10, I would greatly appreciate it.

Read the article

How do I force the system to look for new sound devices?

- by John Zeringue

I have a small flat screen TV (Toshiba) that I often connect via HDMI to my laptop (an HP Pavilion dv4) and use as a computer monitor. When I do this, I prefer to use the TV's speakers, particularly when I'm watching video, because the sound quality is much better. However, when I connect the HDMI cable after turning on my computer (rather than having it plugged in before booting up), Sound Settings does not list the TV as an output device, and I am forced to reboot. I was curious if there is an easier solution to this, perhaps a CLI command to check for new sound outputs. Does anyone know of something like this or have another solution? To clarify, I believe this is a software problem. The HDMI always works, and I can switch my desktop over to the TV at any time. The issue is that, if the HDMI wasn't connected during start up, the TV will not appear as an output option in the Sound Settings GUI. So, unless I'm mistaken, my question is not HDMI specific, but rather a general usage question about manipulating sound settings from the command line.

Read the article

How do I get my Intel HD graphics to work alongside my HD7850, as my second(HDMI out) monitor?

- by AlexTes

Title says it all. Further info: Motherboard: http://www.asrock.com/mb/Intel/Z77%20Pro3/ Processor: http://ark.intel.com/products/65520/Intel-Core-i5-3570K-Processor-%286M-Cache-up-to-3_80-GHz%29 So currently my main screen is running on my HD7850. Got drivers from the amd website. I have looked through dozens of questions here. I'm about to try booting Ubuntu from a stick and seeing if the xorg-edgers drivers might help. When booting, all action goes down on the very screen I'm trying to get to work.*EDIT never mind this. Seems to be special boot magic. As the screen only displays whiteline errors once the gui of ubuntu has kicked in and everything graphic is happening through my graphics card again. Connected through HDMI(motherboard)-DVI. So unless having multiple displays is a huge deal the solution hopefully isn't that complicated. I just feel I'm missing something simple. If this really is complicated, I should probably just hook up the display to my graphics card. My CPU is usually the one chilling out though so I'd like to try to get that to work. Also just because I don't want to buy an extra cable and this set up makes me feel warm and fuzzy inside. Tell me what to try or look up, I'll be most appreciative. Thank you! **UPDATE The x-swat ppa installed some intel stuff. Booting with one monitor plugged into the motherboard gives nothing. Doing it with the pc already on gives the purple "Ubuntu" with 5 dots boot/shutdown screen.

Read the article

Data recovery on a Samsung SV1203N HDD

- by Jim Conace

Let me start by saying that I am a beginner in Ubuntu, but pretty knowledgeable with Windows. I am having a strange problem trying to recover data from a Samsung SV1203N HDD (120 GiB). I have tried numerous things in both Windows 7 and Ubuntu 12.04 LTS (on a flash drive, an external HDD and a Live CD). This drive has some very important data on it and I am praying some of you Ubuntu geeks can help me get it back. Here's my problem. The HDD is clicking while I am booting, but it stops when I get into Ubuntu or Windows. It refuses to be detected in the bios, so I cant perform any tests on it. I have tried numerous things in both Windows (repair CD, Jumpers, etc.) and Ubuntu (Boot-Fix, GParted, Testdisk, Photorec, forcing a mount, etc.). But it all seems to lead me back to the fact that the drive is not being recognized in the BIOS. I've even tried chilling the drive in the fridge, which worked well for another drive I work on, and I recovered all of the data in Ubuntu flawlessly. I am assuming that since the drive stops clicking when I get into the OS' that there is hope for recovery. I am going to try an IDE/SATA to USB cable, and replacing the Logic Board, but I want to exhaust all other possibilities before I do that. Any help would be greatly appreciated Bye

Read the article

Cannot connect to Internet via Wifi

- by lvogel

I have a laptop that's currently configured as a dual-boot. The problem: I cannot connect to the Internet in the home wireless network through Ubuntu in the apartment where I currently live. The strange part: I can connect to it just fine through Windows (as right now), and I can use the Internet through Ubuntu on this computer with all the other wireless networks I have tried. The problem is only with this particular combination. The only possible explanations I can think of are either that this network is WPS, or that it's a driver problem--Vodafone router. The router 'sees' the computer--and it says it's connected; however, I keep getting prompted for a password, and I enter the key that works with Windows, but in Ubuntu it just keeps asking for it repeatedly, and I can't access the Internet. I don't have an ethernet cable at the moment, but if someone would be so kind as to ask me questions I will gladly answer, and if you have suggestions, I will do them--the only thing is, I am subletting this apartment from someone who is away on vacation, so I don't want to screw with the router settings unless I know what I'm doing! - I do not have Wicd - Yes, I have the router's information (key works in Windows) - Feedback of lshw says that the wireless card is Ultimate N Wifi Link 5300, vendor: Intel Corporation, physical id: 0 ,etc. The first two commands I was told to try work OK, but when I typed sudo ifconfig wlan0 essid ..... I got back 'essid: Unknown host' Would my question be better on the Ubuntu forums than here on AU?

Read the article

Lubuntu 13.04, kernel still 3.8.0-32-generic

- by Blue Ice

My question is very similar to Ubuntu 13.10, kernel still 3.8.0-31-generic. Recently was updating to Saucy and the ethernet cable got unplugged. So I decided to run Software Update again, to reinstall files. It returned that "everything is up to date". But according to these command-line searches, that is incorrect. How can I install Saucy now safely from the command line? sudo apt-get install lubuntu-desktop Reading package lists... Done Building dependency tree Reading state information... Done lubuntu-desktop is already the newest version. The following package was automatically installed and is no longer required: linux-image-extra-3.8.0-19-generic Use 'apt-get autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. sudo apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. sudo apt-get update Get:1 http://extras.ubuntu.com raring Release.gpg [72 B] Hit http://extras.ubuntu.com raring Release Get:2 http://az-1.hpcloud.mirror.websitedevops.com raring Release.gpg Hit http://extras.ubuntu.com raring/main Sources Hit http://extras.ubuntu.com raring/main i386 Packages Get:3 http://az-1.hpcloud.mirror.websitedevops.com raring-updates Release.gpg Get:4 http://az-1.hpcloud.mirror.websitedevops.com raring-backports Release.gpg Get:5 http://az-1.hpcloud.mirror.websitedevops.com raring-security Release.gpg Get:6 http://az-1.hpcloud.mirror.websitedevops.com raring Release Ign http://extras.ubuntu.com raring/main Translation-en_US Ign http://extras.ubuntu.com raring/main Translation-en Hit http://ppa.launchpad.net raring Release.gpg Ign http://az-1.hpcloud.mirror.websitedevops.com raring Release E: GPG error: http://az-1.hpcloud.mirror.websitedevops.com raring Release: The following signatures were invalid: NODATA 1 NODATA 2 lsb_release -rd Description: Ubuntu 13.04 Release: 13.04 uname -r 3.8.0-32-generic

Read the article

Very slow wireless connection (unrelated to power management) using Netgear N150 WNA1100 in 12.04

- by vgaldikas

I am using a Netgear N150 WNA1100 USB Adapter. The network driver is: ath9k_htc. When I use Ubuntu 12.04 my wireless connection is much slower than when I use the WNA1100 with my Windows 7 installation on the same machine. I have been researching this and the most common reason for this seems to be related to power management. However for me this is off by default. I had entered a bunch of different commands and, at one stage, I got it to work at full power. But then I rebooted the machine and it went back to slow again. After entering the different commands I was afraid that I may have messed something up, so I performed a fresh install of Ubuntu. I still have the same problem. My wireless connection is still much slower when using Ubuntu than when using Windows 7. I am not sure what other info could help... EDIT: Ok, I have made live usb from the iso file I used to install Ubuntu on this pc, and ran it on my laptop. Still the same problem. However la[top works grand on cable. I suppose this means that my wireless adapter or network driver can be eliminated as root of the problem.. So maybe to do with router itself? I use ZyXEL P-660HW-D1

Read the article

No sound after video card replaced (AMD Radeon HD 7770)

- by Sean

Issue: no sound System: Dual boot Windows 7 (sda) Ubuntu 12.04 (sdb) 2 harddrives Dell XPS 730 Video card: AMD Radeo HD 7770 Diamond Multimedia Sound card: Creative Labs SB X-Fi Additional info: My sound used to work. Then, my old video card (NVIDIA geforce 280) died. I bought and installed a new video card: Radeon HD 7770. After this, my sound no longer worked in ubuntu (Win7 audio still works). Everything else in ubuntu, such as video, works fine. I suspect it has something to do with the fact that the Radeon card includes sound capability. Problem Details: If I click on System Settings - Sound, the panel freezes and stops responding indefinitely. The sound volume icon at the top of the screen (by the clock) shows 3 dashes beside it "---", and an empty drop-down box shows if I click on it. (Possibly related to 1.) When I reboot my machine, I get the message: "gnome settings daemon not responding". I have to force the reboot. I reinstalled ubunbu (perserving my home directory) and the problem persists. Diagnostics info: Following procedure outlined here: https://help.ubuntu.com/community/SoundTroubleshooting The following is a list of terminal commands, and their output: $ aplay -l List of PLAYBACK Hardware Devices There is no listing beyond that, and the command freezes until I hit control-c $ lspci -v | grep -A7 -i "audio" 00:0f.1 Audio device: NVIDIA Corporation MCP55 High Definition Audio (rev a2) Subsystem: Dell Device 0224 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at dfff0000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel -- 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device aab0 Subsystem: Diamond Multimedia Systems Device aab0 Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at dfefc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel -- 03:0a.0 Audio device: Creative Labs SB X-Fi Subsystem: Creative Labs Device 6002 Flags: bus master, medium devsel, latency 32, IRQ 18 Memory at dbff4000 (32-bit, non-prefetchable) [size=16K] Memory at dbc00000 (64-bit, non-prefetchable) [size=2M] Memory at d4000000 (64-bit, non-prefetchable) [size=64M] I/O ports at 8c00 [size=32] Capabilities: <access denied> Notice the Diamond Multimedia Systems Device - that seems to be my video card sound. My video card is Diamond multimedia. Also there's the weird NVIDIA device in there. That must either be a remnant of my now removed NVIDIA graphics card, or else some kind of on-board thing. Not sure which. $ killall pulseaudio This allows me to open system settings - sound. But the "Test Sound" button makes no sound And the output volume + mute controls are greyed / disabled at 0 volume. It also allows me to click on the sound control in the "task bar" (beside the clock), and a volume slider drops down, but it is disabled / greyed at 0 volume. $ find /lib/modules/uname -r | grep snd /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-88pm860x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic3x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8900.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8978.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320dac33.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm9090.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-sta32x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max98088.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max9850.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-rt5631.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8903.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8580.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8523.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max9877.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ads117x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8955.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8804.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-sgtl5000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8750.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm2000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic32x4.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4642.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad193x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8753.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4535.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8985.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8350.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-dfbmcs320.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs42l51.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic26.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8737.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-uda1380.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8776.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8995.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tpa6130a2.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8727.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm5100.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8991.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8510.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-jz4740-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8400.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-lm4857.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8960.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-alc5623.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs4270.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic23.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8993.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8961.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8940.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-uda134x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad1836.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8994.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8782.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs4271.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8974.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8983.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8962.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4641.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm-hubs.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8971.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8996.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wl1273.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-adav80x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-spdif.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-pcm3008.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cx20442.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4671.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8711.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad73311.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max98095.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm9081.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8741.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm1250-ev1.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8988.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-adau1373.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8731.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-l3.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ssm2602.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-da7210.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4104.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8904.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8728.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8770.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8990.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/snd-soc-core.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/synth/emux/snd-emux-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/synth/snd-util-mem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-hrtimer.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-hwdep.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-pcm.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-rawmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/oss/snd-mixer-oss.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-page-alloc.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-dummy.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-virmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-device.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi-event.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi-emul.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-timer.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pcmcia/vx/snd-vxpocket.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/6fire/snd-usb-6fire.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/snd-usbmidi-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/caiaq/snd-usb-caiaq.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/usx2y/snd-usb-usx2y.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/usx2y/snd-usb-us122l.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/snd-usb-audio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/misc/snd-ua101.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl3/snd-opl3-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl3/snd-opl3-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl4/snd-opl4-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl4/snd-opl4-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-portman2x4.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-serial-u16550.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-mts64.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-mtpav.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/mpu401/snd-mpu401.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/vx/snd-vx-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-dummy.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-aloop.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/pcsp/snd-pcsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-virmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-firewire-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-firewire-speakers.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-isight.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-tea6330t.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-tea575x-tuner.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4113.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-pt2258.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4117.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4xxx-adda.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4114.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-cs8427.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-i2c.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/korg1212/snd-korg1212.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8830.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8820.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8810.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/aw2/snd-aw2.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-sis7019.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ens1371.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/vx222/snd-vx222.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-via82xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-es1968.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-atiixp-modem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cs4281.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-sonicvibes.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-intel8x0.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-maestro3.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ac97/snd-ac97-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-es1938.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-fm801.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/nm256/snd-nm256.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-realtek.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-cmedia.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-conexant.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-intel.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-analog.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-hdmi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-idt.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-ca0110.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-cirrus.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-via.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-ca0132.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-si3054.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/riptide/snd-riptide.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ens1370.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-als4000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-intel8x0m.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ca0106/snd-ca0106.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cs5530.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/cs5535audio/snd-cs5535audio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-rme32.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ymfpci/snd-ymfpci.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ctxfi/snd-ctxfi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-azt3328.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/cs46xx/snd-cs46xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/lx6464es/snd-lx6464es.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice1712.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice17xx-ak4xxx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice1724.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/mixart/snd-mixart.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ali5451/snd-ali5451.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/lola/snd-lola.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-oxygen-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-oxygen.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-virtuoso.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-via82xx-modem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/pcxhr/snd-pcxhr.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigo.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-echo3g.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-mona.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-layla20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-gina20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-layla24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-mia.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigoiox.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-darla24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigoio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigodjx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-gina24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-darla20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigodj.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cmipci.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/asihpi/snd-asihpi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ad1889.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-rme9652.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-hdspm.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-hdsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/trident/snd-trident.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-atiixp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-als300.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-bt87x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-rme96.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-miro.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti92x-ad1848.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti93x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti92x-cs4231.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusextreme.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-interwave.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusmax.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-interwave-stb.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gus-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusclassic.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-emu8000-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16-dsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sbawe.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb8-dsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb-common.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16-csp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb8.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-jazz16.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-es18xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-azt2320.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-cmi8330.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-als100.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-classic.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-pinnacle.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/cs423x/snd-cs4231.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/cs423x/snd-cs4236.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/es1688/snd-es1688-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/es1688/snd-es1688.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-adlib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/ad1848/snd-ad1848.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/ad1816a/snd-ad1816a.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/galaxy/snd-azt1605.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/galaxy/snd-azt2316.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/wavefront/snd-wavefront.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/wss/snd-wss-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-sc6000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-sscape.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-opl3sa2.ko

Read the article

What is hogging my connection?

- by SF.

At times it seems like dozens, if not hundreds of root-owned HTTP connections spring up. This is not much of a problem on LAN or WLAN as each of them seems to transfer very little, but if I use GPRS link, my ping times go into minutes (seriously, 80000ms is not infrequent!) and all connections grind to a halt waiting till these end. This usually lasts some 15 minutes and ends about when I start troubleshooting it for real. I've managed to capture a fragment of Nethogs output NetHogs version 0.8.0 PID USER PROGRAM DEV SENT RECEIVED ? root 37.209.147.180:59854-141.101.114.59:80 0.013 0.000 KB/sec ? root 37.209.147.180:59853-141.101.114.59:80 0.000 0.000 KB/sec ? root 37.209.147.180:52804-173.194.70.95:80 0.000 0.000 KB/sec 1954 bw /home/bw/.dropbox-dist/dropbox ppp0 0.000 0.000 KB/sec ? root 37.209.147.180:59851-141.101.114.59:80 0.000 0.000 KB/sec ? root 37.209.147.180:59850-141.101.114.59:80 0.000 0.000 KB/sec ? root 37.209.147.180:52801-173.194.70.95:80 0.000 0.000 KB/sec 13301 bw /usr/lib/firefox/firefox ppp0 0.000 0.000 KB/sec ? root unknown TCP 0.000 0.000 KB/sec Unfortunately, it doesn't display the owning process of these. Does anyone recognize these addresses or is able to suggest how to troubleshoot it further or disable it? Is it some automatic update or something like that? EDIT: per request; netstat -n, for obvious reason that normal netstat won't ever launch as all DNS requests are hogged just the same. netstat -n Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 1 93.154.166.62:51314 198.252.206.16:80 FIN_WAIT1 tcp 0 1 37.209.147.180:44098 198.252.206.16:80 FIN_WAIT1 tcp 0 1 37.209.147.180:59855 141.101.114.59:80 FIN_WAIT1 tcp 1 0 192.168.43.224:38237 213.189.45.39:443 CLOSE_WAIT tcp 1 0 93.154.146.186:35167 75.101.152.29:80 CLOSE_WAIT tcp 1 0 192.168.43.224:32939 199.15.160.100:80 CLOSE_WAIT tcp 1 0 192.168.43.224:55619 63.245.217.207:443 CLOSE_WAIT tcp 1 0 93.154.146.186:60210 75.101.152.29:443 CLOSE_WAIT tcp 1 0 192.168.43.224:32944 199.15.160.100:80 CLOSE_WAIT tcp 0 1 37.209.147.180:52804 173.194.70.95:80 FIN_WAIT1 tcp 1 0 93.154.146.186:46606 23.21.151.181:80 CLOSE_WAIT tcp 1 0 93.154.146.186:52619 107.22.246.76:80 CLOSE_WAIT tcp 415 0 93.154.146.186:36156 82.112.106.104:80 CLOSE_WAIT tcp 1 0 93.154.146.186:50352 107.22.246.76:443 CLOSE_WAIT tcp 1 0 192.168.43.224:55000 213.189.45.44:443 CLOSE_WAIT tcp 0 1 37.209.147.180:59853 141.101.114.59:80 FIN_WAIT1 tcp 1 0 192.168.43.224:32937 199.15.160.100:80 CLOSE_WAIT tcp 1 0 192.168.43.224:56055 93.184.221.40:80 CLOSE_WAIT tcp 415 0 93.154.146.186:36155 82.112.106.104:80 CLOSE_WAIT tcp 0 1 37.209.147.180:44097 198.252.206.16:80 FIN_WAIT1 tcp 1 0 93.154.146.186:35166 75.101.152.29:80 CLOSE_WAIT tcp 1 0 192.168.43.224:32943 199.15.160.100:80 CLOSE_WAIT tcp 1 0 93.154.146.186:46607 23.21.151.181:80 CLOSE_WAIT tcp 1 0 93.154.146.186:36422 23.21.151.181:443 CLOSE_WAIT tcp 1 0 192.168.43.224:36081 93.184.220.148:80 CLOSE_WAIT tcp 1 0 192.168.43.224:44462 213.189.45.29:443 CLOSE_WAIT tcp 1 0 192.168.43.224:32938 199.15.160.100:80 CLOSE_WAIT tcp 1 0 93.154.146.186:36419 23.21.151.181:443 CLOSE_WAIT tcp 0 497 93.154.166.62:51313 198.252.206.16:80 FIN_WAIT1 tcp 0 1 37.209.147.180:59851 141.101.114.59:80 FIN_WAIT1 tcp 0 1 37.209.147.180:44095 198.252.206.16:80 FIN_WAIT1 tcp 1 0 93.154.146.186:46611 23.21.151.181:80 CLOSE_WAIT tcp 1 0 192.168.43.224:38236 213.189.45.39:443 CLOSE_WAIT tcp 0 171 37.209.147.180:45341 173.194.113.146:443 ESTABLISHED tcp 0 1 37.209.147.180:52801 173.194.70.95:80 FIN_WAIT1 tcp 1 0 192.168.43.224:36080 93.184.220.148:80 CLOSE_WAIT tcp 0 1 37.209.147.180:59856 141.101.114.59:80 FIN_WAIT1 tcp 0 1 37.209.147.180:44096 198.252.206.16:80 FIN_WAIT1 tcp 0 1 93.154.166.62:57471 108.160.162.49:80 FIN_WAIT1 tcp 0 1 37.209.147.180:59854 141.101.114.59:80 FIN_WAIT1 tcp 0 171 37.209.147.180:45340 173.194.113.146:443 ESTABLISHED tcp 0 168 37.209.147.180:45334 173.194.113.146:443 FIN_WAIT1 tcp 1 0 93.154.146.186:46609 23.21.151.181:80 CLOSE_WAIT tcp 0 1248 93.154.166.62:58270 64.251.23.59:443 FIN_WAIT1 tcp 0 1 37.209.147.180:59850 141.101.114.59:80 FIN_WAIT1 tcp 1 0 93.154.146.186:35181 75.101.152.29:80 CLOSE_WAIT tcp 232 0 93.154.172.168:46384 198.252.206.25:80 ESTABLISHED tcp 1 0 93.154.146.186:52618 107.22.246.76:80 CLOSE_WAIT tcp 1 0 93.154.172.168:36298 173.194.69.95:443 CLOSE_WAIT tcp 1 0 93.154.146.186:60209 75.101.152.29:443 CLOSE_WAIT tcp 0 168 37.209.147.180:45335 173.194.113.146:443 FIN_WAIT1 tcp 415 0 93.154.146.186:36157 82.112.106.104:80 CLOSE_WAIT tcp 1 0 192.168.43.224:36082 93.184.220.148:80 CLOSE_WAIT tcp 1 0 192.168.43.224:32942 199.15.160.100:80 CLOSE_WAIT tcp 1 0 93.154.146.186:50350 107.22.246.76:443 CLOSE_WAIT tcp 1 0 192.168.43.224:32941 199.15.160.100:80 CLOSE_WAIT tcp 0 534 37.209.147.180:44089 198.252.206.16:80 FIN_WAIT1 tcp 1 0 93.154.146.186:46608 23.21.151.181:80 CLOSE_WAIT tcp 1 0 93.154.146.186:46612 23.21.151.181:80 CLOSE_WAIT udp 0 0 37.209.147.180:49057 193.41.112.14:53 ESTABLISHED udp 0 0 37.209.147.180:51631 193.41.112.18:53 ESTABLISHED udp 0 0 37.209.147.180:34827 193.41.112.18:53 ESTABLISHED udp 0 0 37.209.147.180:35908 193.41.112.14:53 ESTABLISHED udp 0 0 37.209.147.180:44106 193.41.112.14:53 ESTABLISHED udp 0 0 37.209.147.180:42184 193.41.112.14:53 ESTABLISHED udp 0 0 37.209.147.180:54485 193.41.112.14:53 ESTABLISHED udp 0 0 37.209.147.180:42216 193.41.112.18:53 ESTABLISHED udp 0 0 37.209.147.180:51961 193.41.112.14:53 ESTABLISHED udp 0 0 37.209.147.180:48412 193.41.112.14:53 ESTABLISHED The interesting lines from ping got lost, but the summary over past few hours is: --- 8.8.8.8 ping statistics --- 107459 packets transmitted, 104376 received, +22 duplicates, 2% packet loss, time 195427362ms rtt min/avg/max/mdev = 24.822/528.132/90538.257/2519.263 ms, pipe 90 EDIT: Per request: Happened again, reboot didn't help but cleaned up all "hanging" processes. Currently netstat shows: bw@pony:/var/log$ netstat -n -t Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 93.154.188.68:42767 74.125.239.143:443 TIME_WAIT tcp 0 0 93.154.188.68:50270 173.194.69.189:443 ESTABLISHED tcp 0 0 93.154.188.68:45250 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:53488 173.194.32.198:80 ESTABLISHED tcp 0 0 93.154.188.68:53490 173.194.32.198:80 ESTABLISHED tcp 0 159 93.154.188.68:42741 74.125.239.143:443 LAST_ACK tcp 0 0 93.154.188.68:45808 198.252.206.25:80 ESTABLISHED tcp 0 0 93.154.188.68:52449 173.194.32.199:443 ESTABLISHED tcp 0 0 93.154.188.68:52600 173.194.32.199:443 TIME_WAIT tcp 0 0 93.154.188.68:50300 173.194.69.189:443 TIME_WAIT tcp 0 0 93.154.188.68:45253 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:46252 173.194.32.204:443 ESTABLISHED tcp 0 0 93.154.188.68:45246 190.93.244.58:80 ESTABLISHED tcp 0 0 93.154.188.68:47064 173.194.113.143:443 ESTABLISHED tcp 0 0 93.154.188.68:34484 173.194.69.95:443 ESTABLISHED tcp 0 0 93.154.188.68:45252 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:54290 173.194.32.202:443 ESTABLISHED tcp 0 0 93.154.188.68:47063 173.194.113.143:443 ESTABLISHED tcp 0 0 93.154.188.68:53469 173.194.32.198:80 TIME_WAIT tcp 0 0 93.154.188.68:45242 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:53468 173.194.32.198:80 ESTABLISHED tcp 0 0 93.154.188.68:50299 173.194.69.189:443 TIME_WAIT tcp 0 0 93.154.188.68:42764 74.125.239.143:443 TIME_WAIT tcp 0 0 93.154.188.68:45256 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:58047 108.160.162.105:80 ESTABLISHED tcp 0 0 93.154.188.68:45249 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:50297 173.194.69.189:443 TIME_WAIT tcp 0 0 93.154.188.68:53470 173.194.32.198:80 ESTABLISHED tcp 0 0 93.154.188.68:34100 68.232.35.121:443 ESTABLISHED tcp 0 0 93.154.188.68:42758 74.125.239.143:443 ESTABLISHED tcp 0 0 93.154.188.68:42765 74.125.239.143:443 TIME_WAIT tcp 0 0 93.154.188.68:39000 173.194.69.95:80 TIME_WAIT tcp 0 0 93.154.188.68:50296 173.194.69.189:443 TIME_WAIT tcp 0 0 93.154.188.68:53467 173.194.32.198:80 ESTABLISHED tcp 0 0 93.154.188.68:42766 74.125.239.143:443 TIME_WAIT tcp 0 0 93.154.188.68:45251 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:45248 190.93.244.58:80 TIME_WAIT tcp 0 0 93.154.188.68:45247 190.93.244.58:80 ESTABLISHED tcp 0 159 93.154.188.68:50254 173.194.69.189:443 LAST_ACK tcp 0 0 93.154.188.68:34483 173.194.69.95:443 ESTABLISHED Output of ps: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.8 0.0 3628 2092 ? Ss 16:52 0:03 /sbin/init root 2 0.0 0.0 0 0 ? S 16:52 0:00 [kthreadd] root 3 0.1 0.0 0 0 ? S 16:52 0:00 [ksoftirqd/0] root 4 0.1 0.0 0 0 ? S 16:52 0:00 [kworker/0:0] root 6 0.0 0.0 0 0 ? S 16:52 0:00 [migration/0] root 7 0.0 0.0 0 0 ? S 16:52 0:00 [watchdog/0] root 8 0.0 0.0 0 0 ? S 16:52 0:00 [migration/1] root 10 0.1 0.0 0 0 ? S 16:52 0:00 [ksoftirqd/1] root 11 0.0 0.0 0 0 ? S 16:52 0:00 [watchdog/1] root 12 0.0 0.0 0 0 ? S 16:52 0:00 [migration/2] root 14 0.1 0.0 0 0 ? S 16:52 0:00 [ksoftirqd/2] root 15 0.0 0.0 0 0 ? S 16:52 0:00 [watchdog/2] root 16 0.0 0.0 0 0 ? S 16:52 0:00 [migration/3] root 17 0.0 0.0 0 0 ? S 16:52 0:00 [kworker/3:0] root 18 0.1 0.0 0 0 ? S 16:52 0:00 [ksoftirqd/3] root 19 0.0 0.0 0 0 ? S 16:52 0:00 [watchdog/3] root 20 0.0 0.0 0 0 ? S< 16:52 0:00 [cpuset] root 21 0.0 0.0 0 0 ? S< 16:52 0:00 [khelper] root 22 0.0 0.0 0 0 ? S 16:52 0:00 [kdevtmpfs] root 23 0.0 0.0 0 0 ? S< 16:52 0:00 [netns] root 24 0.0 0.0 0 0 ? S 16:52 0:00 [sync_supers] root 25 0.0 0.0 0 0 ? S 16:52 0:00 [bdi-default] root 26 0.0 0.0 0 0 ? S< 16:52 0:00 [kintegrityd] root 27 0.0 0.0 0 0 ? S< 16:52 0:00 [kblockd] root 28 0.0 0.0 0 0 ? S< 16:52 0:00 [ata_sff] root 29 0.0 0.0 0 0 ? S 16:52 0:00 [khubd] root 30 0.0 0.0 0 0 ? S< 16:52 0:00 [md] root 42 0.0 0.0 0 0 ? S 16:52 0:00 [khungtaskd] root 43 0.0 0.0 0 0 ? S 16:52 0:00 [kswapd0] root 44 0.0 0.0 0 0 ? SN 16:52 0:00 [ksmd] root 45 0.0 0.0 0 0 ? SN 16:52 0:00 [khugepaged] root 46 0.0 0.0 0 0 ? S 16:52 0:00 [fsnotify_mark] root 47 0.0 0.0 0 0 ? S 16:52 0:00 [ecryptfs-kthrea] root 48 0.0 0.0 0 0 ? S< 16:52 0:00 [crypto] root 59 0.0 0.0 0 0 ? S< 16:52 0:00 [kthrotld] root 70 0.1 0.0 0 0 ? S 16:52 0:00 [kworker/2:1] root 71 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_0] root 72 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_1] root 73 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_2] root 74 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_3] root 75 0.0 0.0 0 0 ? S 16:52 0:00 [kworker/u:2] root 76 0.0 0.0 0 0 ? S 16:52 0:00 [kworker/u:3] root 79 0.0 0.0 0 0 ? S 16:52 0:00 [kworker/1:1] root 99 0.0 0.0 0 0 ? S< 16:52 0:00 [deferwq] root 100 0.0 0.0 0 0 ? S< 16:52 0:00 [charger_manager] root 101 0.0 0.0 0 0 ? S< 16:52 0:00 [devfreq_wq] root 102 0.1 0.0 0 0 ? S 16:52 0:00 [kworker/2:2] root 106 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_4] root 107 0.0 0.0 0 0 ? S 16:52 0:00 [usb-storage] root 108 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_5] root 109 0.0 0.0 0 0 ? S 16:52 0:00 [usb-storage] root 271 0.1 0.0 0 0 ? S 16:52 0:00 [kworker/1:2] root 316 0.0 0.0 0 0 ? S 16:52 0:00 [jbd2/sda1-8] root 317 0.0 0.0 0 0 ? S< 16:52 0:00 [ext4-dio-unwrit] root 440 0.1 0.0 2820 608 ? S 16:52 0:00 upstart-udev-bridge --daemon root 478 0.0 0.0 3460 1648 ? Ss 16:52 0:00 /sbin/udevd --daemon root 632 0.0 0.0 3348 1336 ? S 16:52 0:00 /sbin/udevd --daemon root 633 0.0 0.0 3348 1204 ? S 16:52 0:00 /sbin/udevd --daemon root 782 0.0 0.0 2816 596 ? S 16:52 0:00 upstart-socket-bridge --daemon root 822 0.0 0.0 6684 2400 ? Ss 16:52 0:00 /usr/sbin/sshd -D 102 834 0.2 0.0 4064 1864 ? Ss 16:52 0:01 dbus-daemon --system --fork root 857 0.0 0.1 7420 3380 ? Ss 16:52 0:00 /usr/sbin/modem-manager root 858 0.0 0.0 4784 1636 ? Ss 16:52 0:00 /usr/sbin/bluetoothd syslog 860 0.0 0.0 31068 1496 ? Sl 16:52 0:00 rsyslogd -c5 root 869 0.1 0.1 24280 5564 ? Ssl 16:52 0:00 NetworkManager avahi 883 0.0 0.0 3448 1488 ? S 16:52 0:00 avahi-daemon: running [pony.local] avahi 884 0.0 0.0 3448 436 ? S 16:52 0:00 avahi-daemon: chroot helper root 885 0.0 0.0 0 0 ? S< 16:52 0:00 [kpsmoused] root 892 0.0 0.1 25696 4140 ? Sl 16:52 0:00 /usr/lib/policykit-1/polkitd --no-debug root 923 0.0 0.0 0 0 ? S 16:52 0:00 [scsi_eh_6] root 959 0.0 0.0 0 0 ? S< 16:52 0:00 [krfcommd] root 970 0.0 0.1 7536 3120 ? Ss 16:52 0:00 /usr/sbin/cupsd -F colord 976 0.1 0.3 55080 10396 ? Sl 16:52 0:00 /usr/lib/i386-linux-gnu/colord/colord root 979 0.0 0.0 4632 872 tty4 Ss+ 16:52 0:00 /sbin/getty -8 38400 tty4 root 987 0.0 0.0 4632 884 tty5 Ss+ 16:52 0:00 /sbin/getty -8 38400 tty5 root 994 0.0 0.0 4632 884 tty2 Ss+ 16:52 0:00 /sbin/getty -8 38400 tty2 root 995 0.0 0.0 4632 868 tty3 Ss+ 16:52 0:00 /sbin/getty -8 38400 tty3 root 998 0.0 0.0 4632 876 tty6 Ss+ 16:52 0:00 /sbin/getty -8 38400 tty6 root 1022 0.0 0.0 2176 680 ? Ss 16:52 0:00 acpid -c /etc/acpi/events -s /var/run/acpid.socket root 1029 0.0 0.0 3632 664 ? Ss 16:52 0:00 /usr/sbin/irqbalance daemon 1030 0.0 0.0 2476 120 ? Ss 16:52 0:00 atd root 1031 0.0 0.0 2620 880 ? Ss 16:52 0:00 cron root 1061 0.1 0.0 0 0 ? S 16:52 0:00 [kworker/3:2] root 1064 0.0 1.0 34116 31072 ? SLsl 16:52 0:00 lightdm root 1076 13.4 1.2 118688 37920 tty7 Ssl+ 16:52 0:55 /usr/bin/X :0 -core -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswit root 1085 0.0 0.0 0 0 ? S 16:52 0:00 [rts_pstor] root 1087 0.0 0.0 0 0 ? S 16:52 0:00 [rtsx-polling] root 1095 0.0 0.0 0 0 ? S< 16:52 0:00 [cfg80211] root 1127 0.0 0.0 0 0 ? S 16:52 0:00 [flush-8:0] root 1130 0.0 0.0 6136 1824 ? Ss 16:52 0:00 /sbin/wpa_supplicant -B -P /run/sendsigs.omit.d/wpasupplicant.pid -u -s -O /va root 1137 0.0 0.1 24604 3164 ? Sl 16:52 0:00 /usr/lib/accountsservice/accounts-daemon root 1140 0.0 0.0 0 0 ? S< 16:52 0:00 [hd-audio0] root 1188 0.0 0.1 34308 3420 ? Sl 16:52 0:00 /usr/sbin/console-kit-daemon --no-daemon root 1425 0.0 0.0 4632 872 tty1 Ss+ 16:52 0:00 /sbin/getty -8 38400 tty1 root 1443 0.1 0.1 29460 4664 ? Sl 16:52 0:00 /usr/lib/upower/upowerd root 1579 0.0 0.1 16540 3272 ? Sl 16:53 0:00 lightdm --session-child 12 19 bw 1623 0.0 0.0 2232 644 ? Ss 16:53 0:00 /bin/sh /usr/bin/startkde bw 1672 0.0 0.0 4092 204 ? Ss 16:53 0:00 /usr/bin/ssh-agent /usr/bin/gpg-agent --daemon --sh --write-env-file=/home/bw/ bw 1673 0.0 0.0 5492 384 ? Ss 16:53 0:00 /usr/bin/gpg-agent --daemon --sh --write-env-file=/home/bw/.gnupg/gpg-agent-in bw 1676 0.0 0.0 3848 792 ? S 16:53 0:00 /usr/bin/dbus-launch --exit-with-session /usr/bin/startkde bw 1677 0.5 0.0 5384 2180 ? Ss 16:53 0:02 //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session root 1704 0.3 0.1 25348 3600 ? Sl 16:53 0:01 /usr/lib/udisks/udisks-daemon root 1705 0.0 0.0 6620 728 ? S 16:53 0:00 udisks-daemon: not polling any devices bw 1736 0.0 0.0 2008 64 ? S 16:53 0:00 /usr/lib/kde4/libexec/start_kdeinit +kcminit_startup bw 1737 0.0 0.5 115200 15588 ? Ss 16:53 0:00 kdeinit4: kdeinit4 Running... bw 1738 0.1 0.2 116756 8728 ? S 16:53 0:00 kdeinit4: klauncher [kdeinit] --fd=9 bw 1740 0.6 1.0 340524 31264 ? Sl 16:53 0:02 kdeinit4: kded4 [kdeinit] bw 1742 0.0 0.0 8944 2144 ? S 16:53 0:00 /usr/lib/i386-linux-gnu/gconf/gconfd-2 bw 1746 0.2 0.4 92028 14688 ? S 16:53 0:00 /usr/bin/kglobalaccel bw 1748 0.0 0.4 90804 13500 ? S 16:53 0:00 /usr/bin/kwalletd bw 1752 0.1 0.5 103764 15152 ? S 16:53 0:00 /usr/bin/kactivitymanagerd bw 1758 0.0 0.0 2144 280 ? S 16:53 0:00 kwrapper4 ksmserver bw 1759 0.1 0.5 150016 16088 ? Sl 16:53 0:00 kdeinit4: ksmserver [kdeinit] bw 1763 2.2 1.0 178492 32100 ? Sl 16:53 0:08 kwin bw 1772 0.2 0.5 106292 16340 ? Sl 16:53 0:00 /usr/bin/knotify4 bw 1777 0.9 1.1 246120 32912 ? Sl 16:53 0:03 /usr/bin/krunner bw 1778 6.3 2.7 389884 80216 ? Sl 16:53 0:23 /usr/bin/plasma-desktop bw 1785 0.0 0.0 2844 1208 ? S 16:53 0:00 ksysguardd bw 1789 0.1 0.4 82036 14176 ? S 16:53 0:00 /usr/bin/kuiserver bw 1805 0.3 0.1 61560 5612 ? Sl 16:53 0:01 /usr/bin/akonadi_control root 1806 0.0 0.0 0 0 ? S 16:53 0:00 [kworker/0:2] bw 1808 0.1 0.2 211852 8460 ? Sl 16:53 0:00 akonadiserver bw 1810 0.4 0.8 244116 25360 ? Sl 16:53 0:01 /usr/sbin/mysqld --defaults-file=/home/bw/.local/share/akonadi/mysql.conf --da bw 1874 0.0 0.0 35284 2956 ? Sl 16:53 0:00 /usr/bin/xsettings-kde bw 1876 0.0 0.3 68776 9488 ? Sl 16:53 0:00 /usr/bin/nepomukserver bw 1884 0.4 0.9 173876 29240 ? SNl 16:53 0:01 /usr/bin/nepomukservicestub nepomukstorage bw 1902 6.1 2.1 451512 63924 ? Sl 16:53 0:21 /home/bw/.dropbox-dist/dropbox bw 1906 3.8 1.0 142368 32376 ? Rl 16:53 0:13 /usr/bin/yakuake bw 1933 0.0 0.1 54636 4680 ? Sl 16:53 0:00 /usr/bin/zeitgeist-datahub bw 1943 0.5 1.5 164836 46836 ? Sl 16:53 0:01 python /usr/bin/printer-applet bw 1945 0.1 0.1 99636 5048 ? S<l 16:53 0:00 /usr/bin/pulseaudio --start --log-target=syslog rtkit 1947 0.0 0.0 21336 1248 ? SNl 16:53 0:00 /usr/lib/rtkit/rtkit-daemon bw 1958 0.0 0.1 44204 3792 ? Sl 16:53 0:00 /usr/bin/zeitgeist-daemon bw 1972 0.0 0.0 27008 2684 ? Sl 16:53 0:00 /usr/lib/gvfs/gvfsd bw 1974 0.1 0.5 90480 16660 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_akonotes_resource akonadi_akonotes_res bw 1984 0.1 0.5 90472 16636 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_akonotes_resource akonadi_akonotes_res bw 1985 0.3 0.9 148800 28304 ? S 16:53 0:01 /usr/bin/akonadi_archivemail_agent --identifier akonadi_archivemail_agent bw 1992 0.1 0.5 90020 16148 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_contacts_resource akonadi_contacts_res bw 1993 0.1 0.5 90132 16452 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_contacts_resource akonadi_contacts_res bw 1994 0.1 0.5 90564 16332 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_ical_resource akonadi_ical_resource_0 bw 1995 0.1 0.5 90676 16732 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_ical_resource akonadi_ical_resource_1 bw 1996 0.1 0.5 90468 16800 ? Sl 16:53 0:00 /usr/bin/akonadi_agent_launcher akonadi_maildir_resource akonadi_maildir_resou bw 1999 0.2 0.6 99324 19276 ? S 16:53 0:00 /usr/bin/akonadi_maildispatcher_agent --identifier akonadi_maildispatcher_agen bw 2006 0.3 0.9 148808 28332 ? S 16:53 0:01 /usr/bin/akonadi_mailfilter_agent --identifier akonadi_mailfilter_agent bw 2017 0.0 0.1 50256 4716 ? Sl 16:53 0:00 /usr/lib/zeitgeist/zeitgeist-fts bw 2024 0.2 0.6 103632 18376 ? Sl 16:53 0:00 /usr/bin/akonadi_nepomuk_feeder --identifier akonadi_nepomuk_feeder bw 2043 0.0 0.0 4484 280 ? S 16:53 0:00 /bin/cat bw 2101 0.2 0.7 113600 22396 ? Sl 16:53 0:00 /usr/lib/kde4/libexec/polkit-kde-authentication-agent-1 bw 2105 0.2 0.7 114196 22072 ? Sl 16:53 0:00 /usr/bin/nepomukcontroller bw 2156 0.3 1.0 333188 31244 ? Sl 16:54 0:01 /usr/bin/kmix bw 2167 0.0 0.0 6548 2724 pts/2 Ss 16:54 0:00 /bin/bash bw 2177 0.2 0.7 113496 22960 ? Sl 16:54 0:00 /usr/bin/klipper bw 2394 3.5 1.2 52932 35596 ? SNl 16:54 0:11 /usr/bin/virtuoso-t +foreground +configfile /tmp/virtuoso_hX1884.ini +wait root 2460 0.0 0.0 6184 1876 pts/2 S 16:54 0:00 sudo -s root 2500 0.0 0.0 6528 2700 pts/2 S 16:54 0:00 /bin/bash root 2599 0.0 0.0 5444 1280 pts/2 S+ 16:54 0:00 /bin/bash bin/aero root 2606 0.1 0.0 9836 2500 pts/2 S+ 16:54 0:00 wvdial aero2 root 2619 0.0 0.0 3504 1280 pts/2 S 16:54 0:00 /usr/sbin/pppd 57600 modem crtscts defaultroute usehostname -detach user aero bw 2653 0.0 0.0 6600 2880 pts/3 Ss 16:54 0:00 /bin/bash bw 2676 0.4 0.8 130296 24016 ? SNl 16:54 0:01 /usr/bin/nepomukservicestub nepomukfilewatch bw 2679 0.1 0.7 101636 22252 ? SNl 16:54 0:00 /usr/bin/nepomukservicestub nepomukqueryservice bw 2681 0.2 0.8 109836 24280 ? SNl 16:54 0:00 /usr/bin/nepomukservicestub nepomukbackupsync bw 3833 46.0 9.7 829272 288012 ? Rl 16:55 1:46 /usr/lib/firefox/firefox bw 3903 0.0 0.0 35128 2804 ? Sl 16:55 0:00 /usr/lib/at-spi2-core/at-spi-bus-launcher bw 4708 0.1 0.0 6564 2736 pts/4 Ss 16:56 0:00 /bin/bash root 5210 0.0 0.0 0 0 ? S 16:57 0:00 [kworker/u:0] root 6140 0.2 0.0 0 0 ? S 16:58 0:00 [kworker/0:1] root 6371 0.5 0.0 6184 1868 pts/4 S+ 16:59 0:00 sudo nethogs ppp0 root 6411 17.7 0.2 8616 6144 pts/4 S+ 16:59 0:05 nethogs ppp0 bw 6787 0.0 0.0 5464 1220 pts/3 R+ 16:59 0:00 ps auxw

Read the article

Ubuntu 10.10 Network Issues (wireless as well as wired)

- by user9054

down vote favorite Hi Friends, I have got this issue with Ubuntu 10.10 . I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd . so happily i installed ubuntu 10.10 . As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer . The net was on and i was able to surf the net . all hunky dory so far . However on the next boot the fun started . It did not detect the wireless network . I could not see the network manager icon in the systray . I used ifconfig and saw that the entry for eth1 was missing .I used ifup eth1 and it said that eth1 was already up . Then i installed wifi-radar . Wifi-Radar detected the wireless network . I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings . However on clicking connect wifi-radar started looking for a DHCP IP , needless to say it failed . For the love of god i cannot understand why wifi-radar is using DHCP when i have specified manual settings . Next i decided to use the wired network to surf the net looking for a solution . So i plugged in the network cable from my modem , it detected the plugged in connection , i configured eth0 , used pppoeconf and connected to the net . Then i foolishly decided to reboot my PC . And wonders of wonders , the same problem appeared . I cannot see eth0 in my ifconfig anymore . i used pon to start the dsl-provider connection and it said something about network error or something . Now my ifconfig shows only lo , both eth0 and eth1 have disappeared .Can anybody help me on this ? Is it a problem with ipv6 , if so how do you disable ipv6 on ubuntu 10.10 ? OR is this is a known issue with ubuntu 10.10 ? .PS : 1) i tried linux mint 10 and had the same issue . on rebooting wireless network was not getting detected . 2) i have made myself the administrator so that there is no issue of rights or anything. Any help is appreciated.

Read the article

Networking works on Live CD but not after installation.

- by user9054

Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd, so happily I installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started . It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up. Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP. I cannot understand why wifi-radar is using DHCP when I have specified manual settings. Then I decided to use the wired network to surf the net looking for a solution. So I plugged in the network cable from my modem , configured eth0 , used pppoeconf and connected the net. Then I foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon and it said something about network error or something. Now my ifconfig shows only lo .Can anybody help me on this. PS : 1) I tried linux mint 10 and had the same issue . on rebooting wireless network was not getting detected. 2) I have made myself the administrator so that there is no issue of rights or anything.

Read the article

Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

- by Anega

Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

Read the article

Booting Ubuntu on HP Pavilion g7 - 13.04 [duplicate]

- by death2040

This question already has an answer here: My computer boots to a black screen, what options do I have to fix it? 24 answers I have a HP Pavilion G7 with an AMD A4 processor and Radeon graphics. I want to install Ubuntu on my laptop but whenever I put the Ubuntu live CD in it and boot to it, the screen shows the Ubuntu logo and the four little dots then after about a minute or two the screen goes black. I can tell the screen is still on but it doesn't have anything on it. I'm beginning to wonder if its a driver problem but I can't really install the drivers when I cant even get Ubuntu to show anything except a loading screen. I've already tried using 12.04 and 12.10 and all the others down to Ubuntu 10. none of them worked. All the other versions don't even show the Ubuntu logo. I'd prefer to have Ubuntu 13.04 on it if its possible but I haven't had any luck finding a solution. I've also tried using WUBI installer in Windows 7 but all that did was make my computer slower for windows and it does the same with the screen when i boot it to Ubuntu. I'm trying to use Ubuntu alongside Windows 7. I cant find any solution on Google. It wont load anything and I know that there is a program called grub on Ubuntu that I used on my desktop computer when it had graphics trouble but the trouble with my desktop was minor things like the screen would flash and then show weird patterns on the screen. But I can't find anything on what to do with the HP laptop. Please help. I use this laptop a lot for games on Windows 7 and I just want to use Ubuntu for when I take my laptop to school and for school stuff. Edit: I just tried booting it in nomodeset and some other things and still didn't work. It did boot up but now when it goes to install alongside windows it crashes and says Ubuntu is forcing reboot or something like that Also, this question is different from the black screen at boot issue because when I do use nomodeset on my computer and select install Ubuntu it will go as far as the screen where you can choose to replace Windows or run alongside Windows. Then after I click continue it ejects the live CD and turns off my computer without installing anything. The error message it shows when it ejects the disk says signal 15, shutting down - modem manager [1675]: <info> Caught nm-dispatcher.action: Caught signal 15, shutting down... *Deconfiguring network interfaces... Please remove installation media and close the tray (if any) then press ENTER *Deactivating swap... *Stopping remaining crypto disks... *stopping early crypto disks... unmount: /run/lock: not mounted unmount: /run/shm: not mounted

Read the article

Test your internet connection - Emtel Mobile Internet

After yesterday's report on Emtel Fixed Broadband (I'm still wondering where the 'fixed' part is), I did the same tests on Emtel Mobile Internet. For this I'm using the Huawei E169G HSDPA USB stick, connected to the same machine. Actually, this is my fail-safe internet connection and the system automatically switches between them if a problem, let's say timeout, etc. has been detected on the main line. For better comparison I used exactly the same servers on Speedtest.net. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 31.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Mobile Internet) Speedtest.net result of 31.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Mobile Internet) As you might easily see, there is a big difference in speed between national and international connections. More interestingly are the results related to the download and upload ratio. I'm not sure whether connections over Emtel Mobile Internet are asymmetric or symmetric like the Fixed Broadband. Might be interesting to find out. The first test result actually might give us a clue that the connection could be asymmetric with a ratio of 3:1 but again I'm not sure. I'll find out and post an update on this. It depends on network coverage Later today I was on tour with my tablet, a Samsung Galaxy Tab 10.1 (model GT-P7500) running on Android 4.0.4 (Ice Cream Sandwich), and did some more tests using the Speedtest.net app. The results are actually as expected and in areas with better network coverage you will get better results after all. At least, as long as you stay inside the national networks. For anything abroad, it doesn't really matter. But see for yourselves: Speedtest.net result of 31.05.2013 between Cascavelle and servers in Rose Hill, Mauritius (Emtel - Mobile Internet), Port Louis, Mauritius and Kuala Lumpur, Malaysia It's rather shocking and frustrating to see how the speed on international destinations goes down. And the full capability of the tablet's integrated modem (HSDPA: 21 Mbps; HSUPA: 5.76 Mbps) isn't used, too. I guess, this demands more tests in other areas of the island, like Ebene, Pailles or Port Louis. I'll keep you updated... The question remains: Alternatives? After the publication of the test results on Fixed Broadband I had some exchange with others on Facebook. Sadly, it seems that there are really no alternatives to what Emtel is offering at the moment. There are the various internet packages by Mauritius Telecom feat. Orange, like ADSL, MyT and Mobile Internet, and there is Bharat Telecom with their Bees offer which is currently limited to Ebene and parts of Quatre Bornes.

Read the article

Ubuntu won't connect to wired network

- by djeikyb

I'm running 10.04, upgraded from 9.10, maybe, but probably not upgraded from 9.04. I have two wifi routers. Zeus is connected to the dsl modem. Hermes uses a wds bridge with Zeus to extend the network. My desktop (Daedalus) is ethernetted to Hermes. My laptop (Clyde) is wifi, switching to Hermes or Zeus as needed. Occasionally, as in whenever I transfer a large file from desktop to laptop, the wds bridge will die. Fixing it means restarting both routers, though it seems Hermes should boot first. This is ridiculous, and eventually I'll get around to asking you guys to help me stop it from happening. More importantly is that my desktop requires a reboot to get back on the network. WTF. ifconfig shows my nic has no ip. /etc/init.d/networking restart doesn't do anything, not even give me a lousy ip. dhcpcd eth1 grants me an ip address, but doesn't help with internet access. route -n shows what looks like my normal routing table, but pinging google.com informs me it's an unknown host. jake@daedalus:~$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 10.1.1.1 0.0.0.0 UG 0 0 0 eth1 It may be worth noting that I can ping both Zeus (10.1.1.1) and Hermes (10.1.1.4) and my laptop (10.1.1.55). Much obliged for any help. Rebooting is, well, trivial in this instance. But it's stupid. I switched to linux because I like the idea that if one part breaks, you fix it instead of reboot reboot reboot. I've left my poor desktop in disarray, confining myself to my little netbook. My desktop is broken, awaiting magical commands from you brilliant folk. (and yes, i know clyde the netbook should be named icarus. it was its original name. ironically the ssd burned out, and i felt it wasn't right when it came to reinstalling)

Read the article

Wired and Wireless Network Issues with PPPoE

- by user9054

down vote favorite Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd. So happily i installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started. It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up . Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP , needless to say it failed. For the love of god i cannot understand why wifi-radar is using DHCP when i have specified manual settings . Next i decided to use the wired network to surf the net looking for a solution . So i plugged in the network cable from my modem , it detected the plugged in connection , i configured eth0 , used pppoeconf and connected to the net. Then i foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon to start the dsl-provider connection and it said something about network error or something . Now my ifconfig shows only lo , both eth0 and eth1 have disappeared. Can anybody help me on this ? Is it a problem with ipv6 , if so how do you disable ipv6 on ubuntu 10.10 ? OR is this is a known issue with ubuntu 10.10 ? PS : 1) i tried linux mint 10 and had the same issue. On rebooting wireless network was not getting detected . 2) i have made myself the administrator so that there is no issue of rights or anything. Any help is appreciated.

Read the article

Ubuntu 12.04 share the internet over WiFi from wvdial?

- by Sour Lemon

I have just installed Ubuntu 12.04 on a separate partition on my hard drive so I can dual boot to either Windows 7 or Ubuntu. I am living in Japan and so I'm using a mobile broadband USB device called "Softbank C02LC". By default it seems that this device isn't recognised so I did the following: Terminal: sudo su nano /usr/bin/usbModemScript Nano: #!/bin/bash echo 1c9e 9900 > /sys/bus/usb-serial/drivers/option1/new_id Terminal: chmod +x /usr/bin/usbModemScript nano /etc/udev/rules.d/option.rules Nano: ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/usr/bin/usbModemScript" ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/sbin/modprobe option" which made the device visible from the network manager etc. However even though I set up my details correctly when I created a new connection (Correct username, APN etc) as soon as I try to connect it almost immediately disconnects. Because of this I then followed the instructions at this site: http://debugitos.main.jp/index.php?Ubuntu%2F%A5%E2%A5%D0%A5%A4%A5%EB%A5%A4%A5%F3%A5%BF%A1%BC%A5%CD%A5%C3%A5%C8 And I ended up using the c02lc_connect script at the bottom of the page to connect to the internet. The file contains the following bash script: #!/bin/sh usbinterfece=/dev/ttyUSB2 VID=1c9e PID=9900 WRONG_PID=f000 LSUSB=/usr/sbin/lsusb GREP=/bin/grep MODPROBE=/sbin/modprobe SWITCH=/usr/sbin/usb_modeswitch SWITCH_D=/etc/usb_modeswitch.d WVDIAL=/usr/bin/wvdial SLEEP=/bin/sleep SUDO=/usr/bin/sudo WHICH=/usr/bin/which switch_config="$SWITCH_D/$VID:$WRONG_PID" if ! [ -x $WVDIAL -a -x $SWITCH ]; then echo "Install wvdial and usb_modeswitch." exit 0 fi check_usb() { local vid="$1" local pid="$2" ($LSUSB | $GREP "$vid:$pid") } if ! (check_usb "$VID" "$PID"); then echo "Cannot find modem device..." if (check_usb "$VID" "$WRONG_PID") && ( [ -f "$switch_config" ] ); then echo "The device is attached but its mode is wrong." echo "Try usb_modeswitch..." $SUDO $SWITCH -c "$switch_config" $SLEEP 1 if (check_usb "$VID" "$PID"); then echo "Successfully switched the mode." else echo "Failed to switch the mode..." exit 1 fi else exit 1 fi fi if [ ! -c "$usbinterface" ]; then $SUDO $MODPROBE usbserial vendor=0x$VID product=0x$PID $SLEEP 2 fi $SUDO $WVDIAL which works completely fine - no problems what-so-ever. But we also have 1 more laptop here which I need to share the internet connection with. In Windows 7 I do this with the Connectify program, and in Ubuntu I have seen that you can do things like set up hotspots etc. But because I am using WvDial I am not sure how I would share the internet. I am only beginning to use Ubuntu but unfortunately until I can figure out how to share the internet over WiFi when connected via WvDial I have to stick with Windows. If you have any ideas on how to do this it would be much appreciated!

Read the article

No client internet access when setting up these iptables rules

- by Siriss

I have read many other posts but cannot figure this out. eth0 is my external connected to a Comcast modem. The server has internet access with no issues. eth1 is internal and running DHCP for the clients. I have DHCP working just fine, all my clients can get an IP and ping the server but they cannot access the internet. I am using ISC-DHCP-SERVER and have set /etc/default/isc-dhcp-server to INTERFACE="eht1" Here is my dhcpd.conf file located in /etc/dhcp/dhcpd.conf ddns-update-style interim; ignore client-updates; subnet 10.0.10.0 netmask 255.255.255.0 { range 10.0.10.10 10.0.10.200; option routers 10.0.10.2; option subnet-mask 255.255.255.0; option domain-name-servers 208.67.222.222, 208.67.220.220; #OpenDNS # option domain-name "example.com"; default-lease-time 21600; max-lease-time 43200; authoritative; } I have made the *net.ipv4.ip_forward=1* change in /etc/sysctl.conf here is my interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp iface eth1 inet static address 10.0.10.2 netmask 255.255.255.0 network 10.0.10.0 auto eth1 And finally- here is my iptables.conf file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *nat :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.10.0/24 -o eth0 -j MASQUERADE #-A PREROUTING -i eth0 -p tcp --dport 59668 -j DNAT --to-destination 10.0.10.2:59668 COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth1 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 53 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 53 -j ACCEPT -A FORWARD -s 10.0.10.0/24 -o eth0 -j ACCEPT -A FORWARD -d 10.0.10.0/24 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT -A FORWARD -p icmp -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -i eth1 -j ACCEPT #-A FORWARD -i eth0 -m state --state NEW -m tcp -p tcp -d 10.0.10.2 --dport 59668 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT I am completely stuck. I cannot figure out why the clients cannot access the internet. Am I missing a service? Is a service not running? Any help would be greatly appreciated. I tried to be as thorough as possible but please let me know if I have missed something. Thank you!

Search Results

Search found 2968 results on 119 pages for 'cable modem'.

Page 93/119 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100 | Next Page >

- by Wuerze

- by Mike

- by Laurbert515

- by Adam Henne

- by user183025

- by Michael Aquilina

- by YokoBlac

- by user203783

- by John Zeringue

- by AlexTes

- by Jim Conace

- by lvogel

- by Blue Ice

- by vgaldikas

- by Sean

- by SF.

- by user9054

- by user9054

- by Anega

- by death2040

- by djeikyb

- by user9054

- by Sour Lemon

- by Siriss

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100 | Next Page >