Search Results

Search found 2601 results on 105 pages for 'commit'.

Page 93/105 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

• How to lock a transaction for reading a row and then inserting in Hibernate?

  - by at

  I have a table with a name and a name_count. So when I insert a new record, I first check what the maximum name_count is for that name. I then insert the record with that maximum + 1. Works great... except with mysql 5.1 and hibernate 3.5, by default the reads don't respect transaction boundaries. 2 of these inserts for the same name could happen at the same time and end up with the same name_count, which completely screws my application! Unfortunately, there are some specific situations where the above is actually fairly common. So what do I do? I assume I can do a pessimistic lock where any row I read is locked for further reading until I commit or roll-back my transaction. Or I can do an optimistic lock with a version column that automatically keeps trying until there are no conflicts? What's the best approach for my situation and how do I specify it in Hibernate 3.5 and mysql 5.1? The above table is massive and accessed frequently.

  Read the article

• sending the data from form to db in django

  - by BharatKrishna

  I have a form in which I can input text through text boxes. How do I make these data go into the db on clicking submit. this is the code of the form in the template. <form method="post" action="app/save_page"> <p> Title:<input type="text" name="title"/> </p> <p> Name:<input type="text" name="name"/> </p> <p> Phone:<input type="text" name="phone"/> </p> <p> Email:<input type="text" name="email"/> </p> <p> <textarea name="description" rows=20 cols=60> </textarea><br> </p> <input type="submit" value="Submit"/> </form> I have a function in the views.py for saving the data in the page. But I dont know how to impliment it properly: def save_page(request): title = request.POST["title"] name = request.POST["name"] phone = request.POST["phone"] email = request.POST["email"] description = request.POST["description"] Now how do I send these into the db? And what do I put in views.py so that those data goes into the db? so how do I open a database connection and put those into the db and save it? should I do something like : connection=sqlite3.connect('app.db') cursor= connection.cursor() ..... ..... connection.commit() connection.close() Thank you.

  Read the article

• While in a transaction, how can reads to an affected row be prevented until the transaction is done?

  - by Mahn

  I'm fairly sure this has a simple solution, but I haven't been able to find it so far. Provided an InnoDB MySQL database with the isolation level set to SERIALIZABLE, and given the following operation: BEGIN WORK; SELECT * FROM users WHERE userID=1; UPDATE users SET credits=100 WHERE userID=1; COMMIT; I would like to make sure that as soon as the select inside the transaction is issued, the row corresponding to userID=1 is locked for reads until the transaction is done. As it stands now, UPDATEs to this row will wait for the transaction to be finished if it is in process, but SELECTs simply will read the previous value. I understand this is the expected behaviour in this case, but I wonder if there is a way to lock the row in such a way that SELECTs will also wait until the transaction is finished to return the values? The reason I'm looking for that is that at some point, and with enough concurrent users, it could happen that while the previous transaction is in process someone else reads the "credits" to calculate something else. Ideally the code run by that someone else should wait for the transaction to finish to use the new value, because otherwise it could lead to irreversible desync issues. Note that I don't want to lock the entire table for reads, just the specific row. Also, I could add a boolean "locked" field to the tables and set it to 1 every time I'm starting a transaction but I don't really feel this is the most elegant solution here, unless there is absolutely no other way to handle this through mysql directly.

  Read the article

• How can I unobtrusively disable submit buttons with Javascript and Prototype?

  - by Frew

  So I found this recommendation, but I can't quite seem to figure out how. This is the code I originally started with: function greySubmits(e) { var value = e.srcElement.defaultValue; // This doesn't work, but it needs to $(e).insert('<input type="hidden" name="commit" value="' + value + '" />'); // This causes IE to not submit at all $$("input[type='submit']").each(function(v) {v.disabled = true;}) } // This works fine Event.observe(window, 'load', function() { $$("input[type='submit']").each(function(e) { Event.observe(e, 'click', greySubmits); }); }); Anyway, I am pretty close, but I can't seem to get any further. Thanks for any help at all! Update: Sorry, I guess I wasn't entirely clear. I'd like to disable all of the submit buttons when someone clicks a submit button. But I do need to send along the value of the submit button so the server knows which button I clicked, hence the insert call. (Note: insert does not create a child of the element you call it on.) And then after disabling the submit buttons I need to call the containing form of the submit buttons submit call, as IE will not submit after you disable the button. Does that make sense?

  Read the article

• How do you protect yourself from runaway memory consumption bringing down the PC?

  - by romkyns

  Every now and again I find myself doing something moderately dumb that results in my program allocating all the memory it can get and then some. This kind of thing used to cause the program to die fairly quickly with an "out of memory" error, but these days Windows will go out of its way to give this non-existent memory to the application, and in fact is apparently prepared to commit suicide doing so. Not literally of course, but it will starve itself of usable physical RAM so badly that even running the task manager will require half an hour of swapping (after all the runaway application is still allocating more and more memory all the time). This doesn't happen too often, but when it does it's disastrous. I usually have to reset my machine, causing data loss from time to time and generally a lot of inconvenience. Do you have any practical advice on making the consequences of such a mistake less dire? Perhaps some registry tweak to limit the max amount of virtual memory an app is allowed to allocate? Or some CLR flag that will limit this only for the current application? (It's usually in .NET that I do this to myself.) ("Don't run out of RAM" and "Buy more RAM" are no use - the former I have no control over, and the latter I've already done.)

  Read the article

• on click submit button move itsplace

  - by Mayur

  Hi All, I m Using submit button for my form its work fine in all browser except ie7 when an user click on it it moved please suggest me what to do .confirm-button-submit { width : 79px; font : bold 12px sans-serif;; color : #000; background : url("../images/confirm-btn.png") 0 -33px no-repeat; text-decoration : none; margin-top :0px; text-align:center; border:0px; cursor : pointer; height:32px; padding : 8px 0px 12px 0px; } .confirm-button-submit:hover { width : 79px; font : bold 12px sans-serif;; color : #fff; background : url("../images/confirm-btn.png") 0 0 no-repeat; text-decoration : none; margin-top :0px; text-align:center; border:0px; cursor : pointer; height:32px; padding : 8px 0px 12px 0px; } i used this css please tell me what to do code: <input type="button" value="Show" name="commit" onclick="range_validation(this)" class="confirm-button-submit"/>`

  Read the article

• CodeGolf: Find the Unique Paths

  - by st0le

  Here's a pretty simple idea, in this pastebin I've posted some pair of numbers. These represent Nodes of a directed graph. The input to stdin will be of the form, (they'll be numbers, i'll be using an example here) c d q r a b b c d e p q so x y means x is connected to y (not viceversa) There are 2 paths in that example. a->b->c->d->e and p->q->r. You need to print all the unique paths from that graph The output should be of the format a->b->c->d->e p->q->r Notes You can assume the numbers are chosen such that one path doesn't intersect the other (one node belongs to one path) The pairs are in random order. They are more than 1 paths, they can be of different lengths. All numbers are less than 1000. If you need more details, please leave a comment. I'll amend as required. Shameless-Plug For those who enjoy Codegolf, please Commit at Area51 for its very own site:) (for those who don't enjoy it, please support it as well, so we'll stay out of your way...)

  Read the article

• Is there command-line tool to extract typedef, structure, enumeration, variable, function from a C or C++ file?

  - by FooF

  I am desiring a command-line tool to extract a definition or declaration (typedef, structure, enumeration, variable, or function) from a C or C++ source file. Also a way to replace an existing definition/declaration would be handy (after transforming the extracted definition by a user-submitted script). Is there such generic tool available, or is some resonably close approximation of such a tool? Scriptability and ability to hook-up with user created scripts or programs is of importance here, although I am academically curious of GUI programs too. Open source solutions for Unix/Linux camp are preferred (although I am curious of Windows and OS X tools too). Primary language interests are C and C++ but more generic solution would be even better (I think we do not need super accurate parsing capabilities for finding, extracting and replacing a definition in a program source file). Sample Use Cases (extra - for the curious mind): Given deeply nested structs and variable (array) initializations of these types, suppose there is a need to change a struct definition by adding or reordering fields or rewriting the variable/array definitions in more readable format without introducing errors resulting from manual labor. This would work by extracting the old initializations, then using a script/program to write the new initializations to replace the old ones. For implementing a code browsing tool - extract a definition. Decorative code generation (e.g. logging function entries / returns). Scripted code structuring (e.g. extract this and that thing and put in different place without change - version control commit comment could document the command to perform this operation to make it evident and verifiable that nothing changed). Note about tags: More accurate tag than code-generation would be code-transformation but it does not exist.

  Read the article

• svn copy causes "...(403 Forbidden) in reponse to PROPFIND", other actions work

  - by Hops

  Just for a short bit of background, the reason I'm tracking this particular subversion oddity down is because I found it troubleshooting our new Maven setup (specifically the release plugin). release:prepare gives me the same error buried in a stack trace. Executing this command... svn copy http://[server]/svn/tran1/myproject/trunk http://[server]/svn/tran1/myproject/tags/testtag ...gives me the following error: svn: Server sent unexpected return value (403 Forbidden) in response to PROPFIND request for '/svn/tran1' I thought this might be an authentication issue, but I'm able to do pretty much every other subversion thing I can think of. Checkout, add, commit and update all work from the command line. And here's where it gets really weird... I can create branches using Eclipse's Subclipse plugin. This might not be all that strange if Eclipse isn't actually doing an svn copy. tran1 also has a sibling subversion repository next to it. The copy command works fine there. The URL it's trying to get permission for also looks wrong. It's asking about /svn/tran1, when the permissions are set up one level deeper /svn/tran1/myproject/ Any ideas what might be causing my error? Thanks.

  Read the article

• retrieving and restoring textview information from sharedpreferences

  - by user1742524

  I have an activity that allows user to enter notes and store them in dynamically created textviews. However, when the use leaves the activity and returns, all the created textviews disappear. How can i store store or retrieve all of these created textviews, whenever i return to the activity? Also, i think that my sharedpreferences will be overwriting each time a new textview is added. Any suggestions? public class DocNoteActivity extends Activity { private LinearLayout nLayout; private EditText etDocNote; private Button btnAdd1; public static final String PREFS_NAME = "MyPrefsFile"; @Override protected void onCreate(Bundle savedInstanceState) { // TODO Auto-generated method stub super.onCreate(savedInstanceState); setContentView(R.layout.adddocnote); etDocNote = (EditText) findViewById(R.id.editDocNote); btnAdd1 = (Button) findViewById(R.id.btnAdd1); nLayout = (LinearLayout) findViewById(R.id.linearLayout); TextView tvNote = new TextView(this); tvNote.setText(""); btnAdd1.setOnClickListener(onClick()); } private OnClickListener onClick() { // TODO Auto-generated method stub return new OnClickListener(){ public void onClick(View v) { // TODO Auto-generated method stub String newDocNote = etDocNote.getText().toString(); nLayout.addView(createNewTextView(newDocNote)); getSharedPreferences("myprefs", 0).edit().putString("etDocNote", newDocNote).commit(); } }; } private TextView createNewTextView(String newText) { // TODO Auto-generated method stub LayoutParams lparams = new LayoutParams(LayoutParams.WRAP_CONTENT, LayoutParams.WRAP_CONTENT); TextView tvNote = new TextView(this); tvNote.setLayoutParams(lparams); tvNote.setText(newText); return tvNote; } }

  Read the article

• Looking for something to add some standard rules for my c++ project.

  - by rkb

  Hello all, My team is developing a C++ project on linux. We use vim as editor. I want to enforce some code standard rules in our team in such a way that if the code is not in accordance with it, some sort of warning or error will be thrown when it builds or compiles. Not necessarily it builds but at least I can run some plugin or tools on that code to make sure it meets the standard. So that before committing to svn everyone need to run the code through some sort of plugin or script and make sure it meets the requirement and then only he/she can commit. Not sure if we can add some rules to vim, if there are any let me know about it. For eg. In our code standards all the member variables and private functions should start with _ class A{ private: int _count; float _amount; void _increment_count(){ ++_count; } } So I want to throw some warning or error or some sort of messages for this class if the variables are declared as follows. class A{ private: int count; float amount; void increment_count(){ ++_count; } } Please note that warning and error are not from compiler becoz program is still valid. Its from the tool I want to use so that code goes to re-factoring but still works fine on the executable side. I am looking for some sort of plugin or pre parsers or scripts which will help me in achieving all this. Currently we use svn; just to anser the comment.

  Read the article

• Need help to solve sharedPreference probem

  - by HFherasen

  I am working on this app where I have one EditText field where you can write somthing and then it get saved and added to a list(TextView). I save the content of the EditText in this way : saved += "*" + editTextFelt.getText().toString() + ". \n"; saved is a String. Everything works fine, I can even reload the app and it's still displayed in the TextView, but if i try to write somthing and save it everything that was there, now dissapear. anyone know why ? It's kind of confusing, and I have to get it to work! Thank's!! CODE: init Mehtod() sp = getSharedPreferences(fileName, 0); betaView = (TextView)findViewById(R.id.betaTextView); Ive got a button to send the text, and this is like: p ublic void onClick(View v) { switch(v.getId()){ case R.id.btnSend: saved += "*" + editTextFelt.getText().toString() + ". \n"; SharedPreferences.Editor editor = sp.edit(); editor.putString("SAVED", saved); editor.commit(); betaView.setText(sp.getString("SAVED", "Empty"));

  Read the article

• Cannot translate date formats from rails form to mysql db

  - by Steve

  I have a simple search form in rails 3 that has two date fields. I'm having a problem getting these dates into my mysql db. I've tried using the american_date gem, specifying date formats in my initializers, in the config/locales/en.yml file, and directly on the date on the date fields themselves. Currently, I'm setting the rails-approved date format in the view - <%= f.text_field :depart_date, :value=> Date.today.strftime('%Y-%m-%d') %> The dateformat in my DB is also YYYY-mm-dd, so things should be going smoothly. The console tells me that the two date fields are both class = "Date" I think I've found the disconnect. From the logs - Started POST "/searches" for 127.0.0.1 at 2013-10-30 17:43:26 -0400 Processing by SearchesController#create as HTML Parameters: {"utf8"=>"v","search"=>{"depart_date"=>"2013-10-30", "return_date"=>"2013-11-09"} ?[1m?[35m (0.0ms)?[0m BEGIN ?[1m?[36mSQL (0.0ms)?[0m ?[1mINSERT INTO `searches` (`depart_date`,`return_date`) VALUES ('2013-30-10','2013-09-11')?[0m ?[1m?[35m (2.0ms)?[0m COMMIT Note that the month and day values are switched in the insert statement. How can I prevent this from happenening?

  Read the article

• Git development?production workflow – how to set up repo?

  - by Blixt

  I'm working on a relatively small, but fast-changing project (a web application) with a few other developers. We're using Git for source control. We started out creating a stable branch which is what is deployed to the live production web server. The master branch is what is deployed to a secondary "unstable" server for testing purposes. Whenever we felt that the master branch was ready to go live, we merged it into stable. However, we came to a point where we wanted one of the later master commits, but not some of the commits before it, so we used cherry-pick to pull that change into stable. This creates a new commit with the same change as the one in master, and it feels as if we're losing the nice history that Git otherwise provides. Are there better ways of handling this type of unstable/stable deployment model? One solution I thought of was using feature branches, and only ever merging a feature branch into master once we want it to go live. Then we'll tag every deployment instead of having a stable branch.

  Read the article

• VPN iptables Forwarding: Net-to-net

  - by Mike Holler

  I've tried to look elsewhere on this site but I couldn't find anything matching this problem. Right now I have an ipsec tunnel open between our local network and a remote network. Currently, the local box running Openswan ipsec with the tunnel open can ping the remote ipsec box and any of the other computers in the remote network. When logged into on of the remote computers, I can ping any box in our local network. That's what works, this is what doesn't: I can't ping any of the remote computers via a local machine that is not the ipsec box. Here's a diagram of our network: [local ipsec box] ----------\ \ [arbitrary local computer] --[local gateway/router] -- [internet] -- [remote ipsec box] -- [arbitrary remote computer] The local ipsec box and the arbitrary local computer have no direct contact, instead they communicate through the gateway/router. The router has been set up to forward requests from local computers for the remote subnet to the ipsec box. This works. The problem is the ipsec box doesn't forward anything. Whenever an arbitrary local computer pings something on the remote subnet, this is the response: [user@localhost ~]# ping 172.16.53.12 PING 172.16.53.12 (172.16.53.12) 56(84) bytes of data. From 10.31.14.16 icmp_seq=1 Destination Host Prohibited From 10.31.14.16 icmp_seq=2 Destination Host Prohibited From 10.31.14.16 icmp_seq=3 Destination Host Prohibited Here's the traceroute: [root@localhost ~]# traceroute 172.16.53.12 traceroute to 172.16.53.12 (172.16.53.12), 30 hops max, 60 byte packets 1 router.address.net (10.31.14.1) 0.374 ms 0.566 ms 0.651 ms 2 10.31.14.16 (10.31.14.16) 2.068 ms 2.081 ms 2.100 ms 3 10.31.14.16 (10.31.14.16) 2.132 ms !X 2.272 ms !X 2.312 ms !X That's the IP for our ipsec box it's reaching, but it's not being forwarded. On the IPSec box I have enabled IP Forwarding in /etc/sysctl.conf net.ipv4.ip_forward = 1 And I have tried to set up IPTables to forward: *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [759:71213] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 25 -j ACCEPT -A INPUT -p udp -m state --state NEW -m udp --dport 500 -j ACCEPT -A INPUT -p udp -m state --state NEW -m udp --dport 4500 -j ACCEPT -A INPUT -m policy --dir in --pol ipsec -j ACCEPT -A INPUT -p esp -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -s 10.31.14.0/24 -d 172.16.53.0/24 -j ACCEPT -A FORWARD -m policy --dir in --pol ipsec -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT Am I missing a rule in IPTables? Is there something I forgot? NOTE: All the machines are running CentOS 6.x Edit: Note 2: eth1 is the only network interface on the local ipsec box.

  Read the article

• How to add an iptables rule with source IP address

  - by ???

  I have a bash script that starts with this: if [[ $EUID -ne 0 ]]; then echo "Permission denied (are you root?)." exit 1 elif [ $# -ne 1 ] then echo "Usage: install-nfs-server <client network/CIDR>" echo "$ bash install-nfs-server 192.168.1.1/24" exit 2 fi; I then try to add the iptables rules for NFS as follows: iptables -A INPUT -i eth0 -p tcp -s $1 --dport 111 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p udp -s $1 --dport 111 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 111 -m state --state ESTABLISHED -j ACCEPT service iptables save service iptables restart I get the error: Try iptables -h' or 'iptables --help' for more information. Bad argument111' Try iptables -h' or 'iptables --help' for more information. Bad argument111' Saving firewall rules to /etc/sysconfig/iptables: ^[[60G[^[[0;32m OK ^[[0;39m]^M Flushing firewall rules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Setting chains to policy ACCEPT: filter ^[[60G[^[[0;32m OK ^[[0;39m]^M Unloading iptables modules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Applying iptables firewall rules: ^[[60G[^[[0;32m OK ^[[0;39m]^M Loading additional iptables modules: ip_conntrack_netbios_ns ^[[60G[^[[0;32m OK ^[[0;39m]^M When I open /etc/sysconfig/iptables these are the rules: # Generated by iptables-save v1.3.5 on Mon Mar 26 08:00:42 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [466:54208] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A OUTPUT -o eth0 -p tcp -m tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --sport 111 -m state --state ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m state --state NEW -m udp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 111 -j ACCEPT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp -m icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p esp -j ACCEPT -A RH-Firewall-1-INPUT -p ah -j ACCEPT -A RH-Firewall-1-INPUT -d 224.0.0.251 -p udp -m udp --dport 5353 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Mon Mar 26 08:00:42 2012 ~ "/etc/sysconfig/iptables" 32L, 1872C I've also tried: iptables -I RH-Firewall-1-INPUT 1 -m state --state NEW -m tcp -p tcp --source $1 --dport 111 -j ACCEPT iptables -I RH-Firewall-1-INPUT 2 -m udp -p udp --source $1 --dport 111 -j ACCEPT

  Read the article

• Abnormal hangs and restarts Ubuntu 8.04

  - by jai-ho

  Hi, I am using Ubuntu 8.04 LTS and seeing the following behaviors: The system hangs after a while and becomes completely unresponsive. The system sometimes restarts itself ! Can you please help me identify what is the problem? Also please mention where should I look for the possible cause of this error. Thanks. EDIT: Got the following from the dmesg output (the system got hung and had to restart) [ 15.452015] Driver 'sr' needs updating - please use bus_type methods [ 15.456882] Driver 'sd' needs updating - please use bus_type methods [ 15.457987] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray [ 15.457993] Uniform CD-ROM driver Revision: 3.20 [ 15.458058] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 15.463028] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463051] sd 1:0:0:0: [sda] Write Protect is off [ 15.463055] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463083] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463151] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 15.463167] sd 1:0:0:0: [sda] Write Protect is off [ 15.463171] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.463197] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.463202] sda:<5sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 15.464634] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 15.470120] sda1 sda2 < sda5 [ 15.495536] sd 1:0:0:0: [sda] Attached SCSI disk [ 15.759549] Attempting manual resume [ 15.759554] swsusp: Resume From Partition 8:5 [ 15.759556] PM: Checking swsusp image. [ 15.759742] PM: Resume from disk failed. [ 15.779964] EXT3-fs: INFO: recovery required on readonly filesystem. [ 15.779970] EXT3-fs: write access will be enabled during recovery. [ 19.904204] kjournald starting. Commit interval 5 seconds [ 19.904235] EXT3-fs: sda1: orphan cleanup on readonly fs [ 19.904245] ext3_orphan_cleanup: deleting unreferenced inode 303260 [ 19.904304] ext3_orphan_cleanup: deleting unreferenced inode 303329 [ 19.932763] ext3_orphan_cleanup: deleting unreferenced inode 3801871 [ 19.932785] ext3_orphan_cleanup: deleting unreferenced inode 3801874 [ 19.932798] ext3_orphan_cleanup: deleting unreferenced inode 3801910 [ 19.951253] ext3_orphan_cleanup: deleting unreferenced inode 3801912 [ 19.951266] ext3_orphan_cleanup: deleting unreferenced inode 3801914 [ 19.951278] ext3_orphan_cleanup: deleting unreferenced inode 3959212 [ 19.951299] ext3_orphan_cleanup: deleting unreferenced inode 3959213 [ 19.960335] ext3_orphan_cleanup: deleting unreferenced inode 3959215 [ 19.963531] ext3_orphan_cleanup: deleting unreferenced inode 3801875 [ 19.963545] ext3_orphan_cleanup: deleting unreferenced inode 3663727 [ 19.963565] ext3_orphan_cleanup: deleting unreferenced inode 3663708 [ 19.963577] ext3_orphan_cleanup: deleting unreferenced inode 4072122 [ 19.963597] ext3_orphan_cleanup: deleting unreferenced inode 4072157 [ 19.968616] ext3_orphan_cleanup: deleting unreferenced inode 4072159 [ 19.970252] ext3_orphan_cleanup: deleting unreferenced inode 4072160 [ 19.970264] ext3_orphan_cleanup: deleting unreferenced inode 4072161 [ 19.992889] ext3_orphan_cleanup: deleting unreferenced inode 4072264 [ 19.992903] ext3_orphan_cleanup: deleting unreferenced inode 4072267 [ 19.999585] ext3_orphan_cleanup: deleting unreferenced inode 4072268 [ 20.008329] ext3_orphan_cleanup: deleting unreferenced inode 4072270 [ 20.008343] ext3_orphan_cleanup: deleting unreferenced inode 4072123 [ 20.008360] ext3_orphan_cleanup: deleting unreferenced inode 4072452 [ 20.008374] ext3_orphan_cleanup: deleting unreferenced inode 4072453 [ 20.008385] ext3_orphan_cleanup: deleting unreferenced inode 4072124 [ 20.008398] ext3_orphan_cleanup: deleting unreferenced inode 311574 [ 20.008413] ext3_orphan_cleanup: deleting unreferenced inode 967890 [ 20.008420] EXT3-fs: sda1: 28 orphan inodes deleted [ 20.008423] EXT3-fs: recovery complete. [ 20.082622] EXT3-fs: mounted filesystem with ordered data mode. [ 29.025379] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 29.187133] Linux agpgart interface v0.102 [ 29.225338] iTCO_vendor_support: vendor-support=0 [ 29.259662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

  Read the article

• Secure openVPN using IPTABLES

  - by bob franklin smith harriet

  Hey, I setup an openVPN server and it works ok. The next step is to secure it, I opted to use IPTABLES to only allow certain connections through but so far it is not working. I want to enable access to the network behind my openVPN server, and allow other services (web access), when iptables is disabaled or set to allow all this works fine, when using my following rules it does not. also note, I already configured openVPN itself to do what i want and it works fine, its only failing when iptables is started. Any help to tell me why this isnt working will appreciated here. These are the lines that I added in accordance with openVPN's recommendations, unfortunately testing these commands shows that they are requiered, they seem incredibly insecure though, any way to get around using them? # Allow TUN interface connections to OpenVPN server -A INPUT -i tun+ -j ACCEPT #allow TUN interface connections to be forwarded through other interfaces -A FORWARD -i tun+ -j ACCEPT # Allow TAP interface connections to OpenVPN server -A INPUT -i tap+ -j ACCEPT # Allow TAP interface connections to be forwarded through other interfaces -A FORWARD -i tap+ -j ACCEPT These are the new chains and commands i added to restrict access as much as possible unfortunately with these enabled, all that happens is the openVPN connection establishes fine, and then there is no access to the rest of the network behind the openVPN server note I am configuring the main iptables file and I am paranoid so all ports and ip addresses are altered, and -N etc appears before this so ignore that they dont appear. and i added some explanations of what i 'intended' these rules to do, so you dont waste time figuring out where i went wrong : 4 #accepts the vpn over port 1192 -A INPUT -p udp -m udp --dport 1192 -j ACCEPT -A INPUT -j INPUT-FIREWALL -A OUTPUT -j ACCEPT #packets that are to be forwarded from 10.10.1.0 network (all open vpn clients) to the internal network (192.168.5.0) jump to [sic]foward-firewall chain -A FORWARD -s 10.10.1.0/24 -d 192.168.5.0/24 -j FOWARD-FIREWALL #same as above, except for a different internal network -A FORWARD -s 10.10.1.0/24 -d 10.100.5.0/24 -j FOWARD-FIREWALL # reject any not from either of those two ranges -A FORWARD -j REJECT -A INPUT-FIREWALL -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT-FIREWALL -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT-FIREWALL -j REJECT -A FOWARD-FIREWALL -m state --state RELATED,ESTABLISHED -j ACCEPT #80 443 and 53 are accepted -A FOWARD-FIREWALL -m tcp -p tcp --dport 80 -j ACCEPT -A FOWARD-FIREWALL -m tcp -p tcp --dport 443 -j ACCEPT #192.168.5.150 = openVPN sever -A FOWARD-FIREWALL -m tcp -p tcp -d 192.168.5.150 --dport 53 -j ACCEPT -A FOWARD-FIREWALL -m udp -p udp -d 192.168.5.150 --dport 53 -j ACCEPT -A FOWARD-FIREWALL -j REJECT COMMIT now I wait :D

  Read the article

• Problem connecting to SSH in office network

  - by Jeune

  I have trouble connecting via SSH to a server whenever I am in the office. I get as far as being prompted for my password and then after that there's a long wait which always ends in a Write failed: Broken pipe This is only for connecting via SSH. I use svn to commit files to a repository hosted on the same server and there are no hitches. Furthermore, this only happens in our office. When I go the university or whenever I am at home or at the coffee shop I am able to connect seamlessly. There are no firewalls in our office. It's just a basic wireless router connected to a modem setup. It's the same setup I have at home and I guess the same setup in the coffee shop. What are the causes for a broken pipe and why does this phenomenon only happen when I try connect via SSH and not when I work with svn on the same server? Updated: Some debug logs after authentication: debug3: packet_send2: adding 48 (len 64 padlen 16 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env SSH_AGENT_PID debug3: Ignored env TERM debug3: Ignored env SHELL debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env GTK_MODULES debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env LIBGL_DRIVERS_PATH debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env DEFAULTS_PATH debug3: Ignored env SESSION_MANAGER debug3: Ignored env USERNAME debug3: Ignored env XDG_CONFIG_DIRS debug3: Ignored env DESKTOP_SESSION debug3: Ignored env LIBGL_ALWAYS_INDIRECT debug3: Ignored env PATH debug3: Ignored env PWD debug3: Ignored env GDM_KEYBOARD_LAYOUT debug1: Sending env LANG = en_PH.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env GNOME_KEYRING_PID debug3: Ignored env MANDATORY_PATH debug3: Ignored env GDM_LANG debug3: Ignored env GDMSESSION debug3: Ignored env SHLVL debug3: Ignored env HOME debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env XDG_DATA_DIRS debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env DISPLAY debug3: Ignored env LESSCLOSE debug3: Ignored env XAUTHORITY debug3: Ignored env COLORTERM debug3: Ignored env OLDPWD debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 UPDATE 2011-14-07: I am able to connect to the server via SSH now. I didn't do anything but that's because there is no one in the office but me! Having said that, is it possible that it has something to do with the number of sessions an SSH server can handle? UPDATE 2011-14-07: I try to login via SSH through Putty on another machine running windows together with my current SSH session in Ubuntu and now it seems my SSH session in Ubuntu has been dropped. I can't type into the terminal. Is Putty the culprit now?

  Read the article

• Event ID 17890 (A significant part... paged out.) with SQL Server 2008

  - by Godeke

  I have a machine that has SQL Server 2008 Standard installed. Periodically (about once an hour) I am getting Event ID 17890 several times in a row. An example: 6:28:54 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 0 seconds. Working set (KB): 10652, committed (KB): 628428, memory utilization: 1%%. 6:34:27 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 332 seconds. Working set (KB): 169780, committed (KB): 546124, memory utilization: 31%%." 6:38:55 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 600 seconds. Working set (KB): 245068, committed (KB): 546124, memory utilization: 44%%." This pattern repeated at 7:26 - 7:37, 8:26 - 8:36, 9:24 - 9:35 and so with the same increasing working set and memory utilization pattern. I don't have any (known) background tasks running at this time. Backups run at 2:00 This subsided from 11:00 at night until it resumed at 4:00 in the morning and has been continuing the intermittent 10 minute glitch periods. As this server has plenty of RAM (the commit charge has peaked at 2,871,564 of 4,194,012 physical) I disabled the paging files after reading several items I dug up searching Google and not finding any of them changing the situation. This pattern I am documented is after removing the paging files, so I'm not even sure where we are paging the SQL process could be going. I also changed the SQL process memory to have a minimum of 500MB and a maximum of 2GB of RAM (as this is a light duty database server serving only a small workgroup). Has anyone encountered this? Prior to disabling the page files this error would cause 5 minutes of disk thrashing that disabled access to the databases, files, IIS webs and so on. Since disabling the page files it just logs strange things, but I'm not seeing a performance drop at least. Any suggestions would be welcome.

  Read the article

• iptables : how to correctly allow incoming and outgoing traffic for certain ports?

  - by Rubytastic

  Im trying to get incoming and outgoing traffic to be enabled on specific ports, because I block everything at the end of the iptables rules. INPUT and FORWARD reject. What would be the appropiate way to open certain ports for all traffic incoming and outgoing? From docs I found below but one has to really define both lines? iptables -A INPUT -i eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT I try to open ports for xmpp service and some other deamons running on server. Rules: *filter # Allow all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT -d 127.0.0.0/8 -j REJECT # Accept all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow all outbound traffic - you can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allow HTTP # Prevent DDOS attacks (http://blog.bodhizazen.net/linux/prevent-dos-with-iptables/) # Disallow HTTPS -A INPUT -p tcp --dport 80 -m state --state NEW -m limit --limit 50/minute --limit-burst 200 -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -m limit --limit 50/second --limit-burst 50 -j ACCEPT -A INPUT -p tcp --dport 443 -j DROP # Allow SSH connections # The -dport number should be the same port number you set in sshd_config -A INPUT -p tcp -s <myip> --dport ssh -j ACCEPT -A INPUT -p tcp -s <myip> --dport 5984 -j ACCEPT -A INPUT -p tcp --dport ssh -j REJECT # Attempt to block portscans # Anyone who tried to portscan us is locked out for an entire day. -A INPUT -m recent --name portscan --rcheck --seconds 86400 -j DROP -A FORWARD -m recent --name portscan --rcheck --seconds 86400 -j DROP # Once the day has passed, remove them from the portscan list -A INPUT -m recent --name portscan --remove -A FORWARD -m recent --name portscan --remove # These rules add scanners to the portscan list, and log the attempt. -A INPUT -p tcp -m tcp --dport 139 -m recent --name portscan --set -j LOG --log-prefix "Portscan:" -A INPUT -p tcp -m tcp --dport 139 -m recent --name portscan --set -j DROP -A FORWARD -p tcp -m tcp --dport 139 -m recent --name portscan --set -j LOG --log-prefix "Portscan:" -A FORWARD -p tcp -m tcp --dport 139 -m recent --name portscan --set -j DROP # Stop smurf attacks -A INPUT -p icmp -m icmp --icmp-type address-mask-request -j DROP -A INPUT -p icmp -m icmp --icmp-type timestamp-request -j DROP -A INPUT -p icmp -m icmp -j DROP # Drop excessive RST packets to avoid smurf attacks -A INPUT -p tcp -m tcp --tcp-flags RST RST -m limit --limit 2/second --limit-burst 2 -j ACCEPT # Don't allow pings through -A INPUT -p icmp -m icmp --icmp-type 8 -j DROP # Log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT

  Read the article

• 2nd Year College - Learning - Microsoft Server Products

  - by Ryan

  As the title says, I just finished my first year of college (majoring in Software Engineering). Fortunately my school likes Microsoft enough, and I can get pretty much anything I want that Microsoft sells. I also can get IBM Websphere and the like for free as well. Earlier this year, I set up an oldish computer (2.6 Pentium D, x64) to run ubuntu server headless. I'm predominately a Java developer, so Apache, Maven, Nexus, Sonar, SVN, etc made it onto the machine. It worked really well for personal and school projects, especially team projects (quick ramp up). Anyways, I started to pick up C# to complement my Java knowledge (don't judge me :P), and am interested in working with some of the associated Microsoft equivalents. The machine currently has the Ubuntu install, as well as Windows 7 Ultimate. I do all of my actual development work off my laptop, also running Windows 7 Ultimate. I was wondering what software you would recommend putting on the machine. I’m not actually serving anything off the machine itself, but in Ubuntu I had it doing integration tests with Hudson on every commit, and profiling my applications, etc, etc. The machine would be running headless, and I would remote into it. Here is what I am currently leaning towards / wondering about: Windows 7 Ultimate vs Windows Server 2008 (R2) (no one is really clear why I should go with one over the other) Windows Team Foundation Sharepoint (Never used it before, kind of meh about it) IBM Websphere or Glassfish (Some Java EE web server) SQL Server 2008 A DVCS In order to better control product conflicts / limit resource use, I’m wondering if I should install things into virtual machines (I can get VmWare or Microsoft Virtualization Products) I also plan on installing everything I had running under Linux (it’s almost entirely Java based development software, so it’ll run on both, only reason I went with ubuntu during the year was because the apache build seemed better). I’m primarily looking to become familiar with enterprise software development tools, as well as get something functional that will help my development process. (IE, I’ll still use project and assign tasks even though I might be the only one to assign tasks to, just to practice doing so). Is there any other software / configuration details I should explore? Opinions on my current list? I primarily use C#, Java, and PHP. I'm familiar with ruby, and python as well. Thanks!

  Read the article

• How to setup GIT repo on server with need for working dir (non- bare)

  - by OrangeTux

  I want to have configurate a GIT repo for a website. Multiple users will have a clone of the repo on their local machine and on the end of each day they push their work to the server. I can setup a bare repo, but I want a working dir/non-bare repository. The idea is that the working dir of the repository will the root folder for the website. At the end of each day all changes will be visible directly. But I can't find a way to do this. Initializing the server repo with git init gives the following error when a client is trying to push some files: git push origin master [email protected]'s password: Counting objects: 3, done. Writing objects: 100% (3/3), 227 bytes, done. Total 3 (delta 0), reused 0 (delta 0) remote: error: refusing to update checked out branch: refs/heads/master remote: error: By default, updating the current branch in a non-bare repository remote: error: is denied, because it will make the index and work tree inconsistent remote: error: with what you pushed, and will require 'git reset --hard' to match remote: error: the work tree to HEAD. remote: error: remote: error: You can set 'receive.denyCurrentBranch' configuration variable to remote: error: 'ignore' or 'warn' in the remote repository to allow pushing into remote: error: its current branch; however, this is not recommended unless you remote: error: arranged to update its work tree to match what you pushed in some remote: error: other way. remote: error: remote: error: To squelch this message and still keep the default behaviour, set remote: error: 'receive.denyCurrentBranch' configuration variable to 'refuse'. To ssh://[email protected]/home/orangetux/www/ ! [remote rejected] master -> master (branch is currently checked out) error: failed to push some refs to 'ssh://[email protected]/home/orangetux/www/' So I'm wondering if this the right way to setup a GIT repo for a website? If so, how do I have to do this? If not, what is a better way to setup a GIT repo for the development of a website? EDIT you can't push to a non-bare repository Oke, clear. But whats the way to solve my problem? Create a bare repository on the server and have a clone of this repo on the same server in the htdocs folder? This looks a bit clumsy to me. To see the result of a commit I've to clone the repository each time.

  Read the article

• I can't connect to mysql on a remote server

  - by eisaacson

  I'm trying to connect from an Ubuntu server to a RHEL6 server using mysql. I've tried telneting into the server as well as trying to connect with mysql. I've tried commenting out the bind-address but didn't have any success with that either. I don't get an error code or anything with telnet. It just fails after a minute or so. With mysql, I get this error code ERROR 2003 (HY000): Can't connect to MySQL server on 'SERVER_IP' (111). "SERVER_IP" is of course a placeholder where actual error gives that actual IP. I've included my my.cnf as well as well as my iptables from the destination server. On Destination Server... my.cnf: [mysqld] bind-address=0.0.0.0 tmp_table_size=512M max_heap_table_size=512M sort_buffer_size=32M read_buffer_size=128K read_rnd_buffer_size=256K table_cache=2048 key_buffer_size=512M thread_cache_size=50 query_cache_type=1 query_cache_size=256M query_cache_limit=24M #query_alloc_block_size=128 #query_cache_min_res_unit=128 innodb_log_buffer_size=16M innodb_flush_log_at_trx_commit=2 innodb_file_per_table innodb_log_files_in_group=2 innodb_buffer_pool_size=32G innodb_log_file_size=512M innodb_additional_mem_pool_size=20M join_buffer_size=128K max_allowed_packet=100M max_connections=256 wait_timeout=28800 interactive_timeout=3600 # modify isolation method for faster inserting. # Do not uncomment the line below unless you understand what this does. # transaction-isolation = READ-COMMITTED # do not reverse lookup clients skip-name-resolve #long_query_time=6 #log_slow_queries=/var/log/mysqld-slow.log #log_queries_not_using_indexes=On #log_slow_admin_statements=On datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 #Added by Magento ECG long_query_time=1 slow_query_log [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid iptables: :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 225 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp -i eth1 --dport 11211 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT sudo netstat -ntpl Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:11211 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:2123 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:1581 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN - tcp 0 0 :::11211 :::* LISTEN - tcp 0 0 :::22 :::* LISTEN - tcp 0 0 :::225 :::* LISTEN -

  Read the article

• Oracle HRMS API – Create or Update Employee Salary

  - by PRajkumar

  API --  hr_maintain_proposal_api.cre_or_upd_salary_proposal   Note - Salary Basis is required to be assigned to employee assignment before to run Salary Proposal API Example --   DECLARE     lb_inv_next_sal_date_warning      BOOLEAN;     lb_proposed_salary_warning         BOOLEAN;     lb_approved_warning                       BOOLEAN;     lb_payroll_warning                            BOOLEAN;     ln_pay_proposal_id                           NUMBER;     ln_object_version_number                NUMBER; BEGIN    -- Create or Upadte Employee Salary Proposal    -- ----------------------------------------------------------------     hr_maintain_proposal_api.cre_or_upd_salary_proposal     (    -- Input data elements          -- ------------------------------          p_business_group_id                   => fnd_profile.value('PER_BUSINESS_GROUP_ID'),          p_assignment_id                            => 33561,          p_change_date                                => TO_DATE('13-JUN-2011'),          p_proposed_salary_n                   => 1000,          p_approved                                      => 'Y',          -- Output data elements          -- --------------------------------          p_pay_proposal_id                       => ln_pay_proposal_id,          p_object_version_number           => ln_object_version_number,            p_inv_next_sal_date_warning  => lb_inv_next_sal_date_warning,          p_proposed_salary_warning     => lb_proposed_salary_warning,          p_approved_warning                   => lb_approved_warning,          p_payroll_warning                        => lb_payroll_warning     );    COMMIT; EXCEPTION        WHEN OTHERS THEN                           ROLLBACK;                           dbms_output.put_line(SQLERRM); END; / SHOW ERR;  

  Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >