Search Results

Search found 5097 results on 204 pages for 'office'.

Page 93/204 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

• What does this strange network/subnet mask mean?

  - by dunxd

  I'm configuring a new ASA 5505 for deployment as a VPN endpoint in a remote office. After configuring it and connecting the VPN, I get the following messages: WARNING: Pool (10.6.89.200) overlap with existing pool. ERROR: IP address,mask <10.10.0.0,93.137.70.9> doesn't pair 10.6.89.200 is the address I configured for the ASA. It has the subnet mask 255.255.255.0. The ip address 10.10.0.0 corresponds to one of our subnets, but it certainly wouldn't have a subnet mask of 93.137.70.9. That looks more like a public IP address (and resolves to an ADSL connection somewhere). I am sure if we had such a subnet configured, that it would indeed overlap with 10.6.89.200. There is no reference to 93.137.70.9 in the config of this ASA or our head office ASA. Can anyone shed light on what is going on here? The sudden appearance of a strange subnet mask is a bit alarming.

  Read the article

• Simple options for port forwarding to a different port?

  - by Nick

  I have three network printers at our local office, all of which listen on port 9100. Non of them offer the option of changing the listening port. We have a single public static IP address, and access to our main network is through a Linksys WRT-54G. We need to be able to print to these printers from outside the office. The problem is, with the 54G, I can only forward a port to the SAME port on a particular IP address. What I really need though is a way to forward to an ip address and a DIFFERENT port. I need to do this: In port Destination 9100 192.168.1.1 : 9100 9101 192.168.1.2 : 9100 9102 192.168.1.3 : 9100 So I'm looking for options. I could setup an old computer with two network cards and IPtables I suppose, but that seems like a lot of overhead for something relatively simple. Is there a way a virtual machine (read: one network card) could do the advanced port forwarding? Where I forward all traffic to it, and it forwards it on to the right printer? Or what about those mini Linux distros that replace the WRT-54G's firmware? Do any of those support what I need "out of the box"? I have a spare WRT- could I make it an IP tables router? Recommendations for mini distros? Or is there an off-the-shelf product that does this (cheap/local preferred)? Any advice / options appreciated. Thanks!

  Read the article

• DNS issue for internal website routing internet connection from remote location

  - by Michael Paul

  I have an issue that I could use some help with. Our company has a main location and a remote location. Previously, the remote location was connected to the main location through an internet connection VPN tunnel. The connection was pitifully slow at 1.5Mbps, so we upgraded it with a 75Mbps direct link. That meant the remote location lost it's internet access, so we routed their access through the main office internet connection. Everything works perfect except for one thing. The website we host is not accessible from the remote location unless the IP address is used. If I do NSLOOKUP on our website address from a machine connected to the main location network, it resolves correctly to the inside IP address. However, if I do the same from a remote location machine, it resolves to the website's outside IP address. Our internal DNS server(s) have a pointer and CNAME records set up, and everything was working perfectly before the connection was upgraded. In addition, the remote location has a domain controller, DNS server and DHCP server to service these requests at the remote location and prevent these requests from getting routed back and forth over the link. So I think was it happening is that for some reason the DNS server at the remote location is not resolving our website name correctly and passing the requests on to the routers, which then push the request out to the internet DNS system. That resolves the name to our external IP. This is purely a DNS issue, everything else works just fine. I am just stumped on this one. Any ideas on how to fix this? Edit: I forgot to mention that at the remote side of the link is a Cisco ASA-5505 and at the main office there is a Cisco ASA-5510. The link is connected between these 2 devices and the routing is handled in the 5510. Thanks, Michael

  Read the article

• SharePoint: what does "System.Runtime.InteropServices.COMException (0x81071003)" mean?

  - by kpinhack

  Hallo, i've got some code that imports documents into a SharePoint (WSS 3.0 SP1) document-library. That code works most of the time without any problems, but sometimes the document is not imported into the document-library and i get this nasty exception instead. Microsoft.SharePoint.SPException: Unable to update the information in the Microsoft Office document myFileName. ---> System.Runtime.InteropServices.COMException (0x81071003): Unable to update the information in the Microsoft Office document myFileName. bei Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish) bei Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish) What does this exception mean? And why does it occur only sometimes? Thanks!

  Read the article

• Reliable applicance for routing IT emergency calls (SIP and ISDN)

  - by chiborg

  We have a fairly big IT installation and our IT staff needs to be reachable 24/7. At the moment we have the following setup for "emergency" calls to our IT staff on our main Asterisk box: An incoming emergency number (connected via SIP trunk and a BRI card in case the SIP trunk goes down). When the number is called during the office hours, all the SIP phones of the IT staff are called simultaneously. When the number is called out of office hours interface, a list of mobile phone numbers is called, one after another until someone picks up. The list can be changed by the IT staff via command line script. The setup works well, but the Asterisk is heavily used in a call center, has experienced some outages and misconfigurations, each of them bringing down the IT emergency number. So we'd like to put the IT emergency call functionality on a separate device. This does not need to be a big server, it even does not need to be Asterisk, it only has one purpose and should do it reliably. It should be very low-maintenance. Any suggestions for hard- and software?

  Read the article

• Can I use CNAME with ip address? Why If works (sometimes)?

  - by Maciek Sawicki

  I believe that the easiest answer for the first question is "No, You have "A" for this", but I accidentally setup some subdomain using CNAME pointing to ip address and it worked on few computers in my office. I wonder how it was possible? Now, when I'm checking it from home I have following error: beast:~ viroos$ host somesubdomain.somedomain.com Host somesubdomain.somedomain.com not found: 3(NXDOMAIN) I'm 100% it used to work at my office (currently it looks like it doesn't, but I'm checking it on different machine). Therefore I'm not 100% if it worked due to some special network setup or because I tested it just after adding DNS entry. I know this story sounds, a little crazy/incredibly, but can someone help me solve this puzzle. //edit: I'm adding dig output ; <<>> DiG 9.6-ESV-R4-P3 <<>> somesubdomain.somedomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 60224 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;somesubdomain.somedomain.com. IN A ;; ANSWER SECTION: somesubdomain.somedomain.com. 67 IN CNAME xxx.xxx.xxx.xx1. ;; AUTHORITY SECTION: . 1800 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2012040901 1800 900 604800 86400 ;; Query time: 72 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Tue Apr 10 00:11:01 2012 ;; MSG SIZE rcvd: 136

  Read the article

• OpenVPN IPV6 Tunnel Radvd

  - by Arenstar

  Hello.. I have an interesting question regarding ipv6 + openvpn.. My Version is OpenVPN 2.1.1 i have been given a native /64 ipv6 network ( for this example 2001:acb:132:acb::/64 ) The plan was/is, route this block through openvpn and into an office ( for testing purposes ) Soo to explain.. I have a Centos Box as the first linux "router" in a datacenter & a Ubuntu box as the second linux "router" in the office I have created a simple point-to-point tunnel using tun ( based off ipv4 address to start the tunnel ) I have assigned to Centos /sbin/ip addr add fed1::1/128 dev eth0 /sbin/ip addr add fed2::2/128 dev tun0 /sbin/ip route add 2001:acb:132:acb::/64 dev tun0 ## ipv6 Block down the tunnel /sbin/ip route add ::/0 dev eth0 ## Default out to Gateway I have assigned to Ubuntu /sbin/ip addr add fed1::3/128 dev tun0 /sbin/ip addr add fed1::4/128 dev eth0 /sbin/ip route add 2001:acb:132:acb::/64 dev eth0 ## ipv6 Block down to eth0 /sbin/ip route add ::/0 dev tun0 ## Default up the tunnel I have also included on both servers.. sysctl -w net.inet6.ip6.forwarding=1 Looks Good... right??? Wrong.. :( I am not able to ping fed1::1 from fed1::4 (Ubuntu) (can ping :4,:3,:2) However, i can ping fed1::1 fed1::2 from :3 ?????? ( very strange ) I am able to access the internet from any ipv6 interface on the Centos Box but clearly not from the Ubuntu box.. Further, i will eventually run radvd on the Ubuntu box eth0, and autoconf the network with ipv6 address's Anyone with some advice / tips to help me out.. ??? Cheers

  Read the article

• Connecting 2 different subnet masks

  - by Jonathan

  I'm no network genius, but I have managed to get most things running. I get confused about subnets and gateways though. We have an office server connected to around 20 PC's that all communicate fine. We have just gotten a cutting machine that won't connect to our network. The server has DHCP, but that fails on the cutting machine, so I've been trying to set the IP manually. Server details are as follows: IP: 10.1.1.12 SUBNET: 255.255.255.0 GATEWAY: 10.1.1.1 Internet connection is via the modem which is 10.1.1.1 An office PC is ussually set up through DHCP and has the following settings: IP: 10.1.1.36 SUBNET: 255.255.255.0 GATEWAY: 10.1.1.1 PRIMARY DNS: 10.1.1.12 Cutting Machine computer has 2 network ports. 1 is specifically for the communication between the PC and the cutting machine. It's details must be as follows: IP: 10.100.100.2 SUBNET: 255.255.255.252 GATEWAY: BLANK The other network port need to connect to the server. I was told that the IP and SUBNET need to be as follows: IP: 10.100.100.1 SUBNET: 255.255.255.252 GATEWAY: ?? How can I connect this port to the server and/or the internet. If anyone can offer assistance, it would really be appreaciated.

  Read the article

• RRAS Problem routing to central site from RRAS server only?

  - by TomTom

  Given is an office connected to headquarters using a RRAS bridge (2 virtual machines using RRAS to route between the two networks). Naming: The office is A, the RRAS on A is a-lnk. THe headquartters is B, b-lnk the RRAS machine there. The VPN works perfectly - machines can ping and work between the sites. Domain controllers on both ends replicating, DFS working, remote desktop working. All in all... everything is fine. EXCEPT: a-lnk itself can not reach any machine in B. This would normally not be troublesome (noone ever does anything on a-lnk), but there are two exceptions: * a-lnk is supposed to get it's license from a KMS in B, so not being able to reach B means it is not prolonging. * a-lnk is supposed to pull updates from a WSUS in B - and not being able to reach B means - no updates. Given that thigns work (and security is a minor issue - A-lnk is not reachable from the internet as it is behing a NAT hardware anyway) this got not handled for months. I just wan to get this item ticked off now. Anyone an idea what this is? It definitely is not a "dns does not work" or "routing in general is bad" item, as any computer in A can connect to any computer in B, and the other way arount - only the RRAS computer itself seems to do something really awkward. Platform for both: 2008 R2 standard.

  Read the article

• Can I get a domain controller not to act as DNS for the members?

  - by rsw

  Hi, Let me try to explain my current setup. I have one linux machine acting as DHCP and DNS (dhcpd3 and bind) in my network. This works fine, all computers I hook up to the network gets an IP address and proper DNS servers set. Let's call it 10.12.0.10 However, we also have a Windows Server 2003 Domain Controller in our network to which we add our Windows computers (running XP), let's call it 10.12.0.20. I noticed that when I run 'nslookup' on one of the windows machines, it says that the primary DNS is 10.12.0.20. This have not been much of a problem since: The Windows clients are stationary The Windows server in itself point out my real DHCP/DNS, since I can reach everything specified in it However, this turns out to be a problem when we use Laptops. They connect to the domain here and gets a DNS server, but when the user travels or connect the computer from home, we hit a problem. They are connected to their internet, but their DNS is 10.12.0.20 which they can't reach since they're at home and not at the office network. I solved this by removing the register key called "NameServer" with the value 10.12.0.20, but it gets set again whenever they logon to the domain the next time (when they get back to the office). Can I somehow make the computers take whatever DNS server they are handed when connecting to the internet or a home network, instead of always trying to reach the Domain Controller?

  Read the article

• Issues with VPN functionality

  - by Xorandor

  I've been working on setting up VPN connectivity to our office location. We bought a Cisco WRV210 which have a builtin VPN server. Cisco has some software QuickVPN, which is not as quick and easy as I had thought. I've had mixed experiences on different machines with connecting. Instead I configured an IPSec VPN tunnel following a guide from TheGreenBow here http://www.thegreenbow.com/doc/tgbvpn_cg_linksys_wrv200_en.pdf I followed their instructions and tried out an evaluation of their software, and VPN connection should be working ok. I'm able to do RDP to a machine on the network (using IP address, not machine name) and ping the router etc. What I'm trying to solve are two things: It's not like I'm "really" on the network. Or at least I'm restricted to some degree when going through the VPN. I can't access a machine on the network using machine name, only IP. I can't ping a machine, but the router just fine. Could this be that something is not set up properly? If so, I can ofcourse supply additional information. Second, when I log onto the VPN, I would really like my outgoing connection to go through the internet connection of the remote location. Basically if I connect to the VPN I want my outgoing IP to be that of the remote location's (needed for some IP resctrictions on some of our servers). At a previous work location it worked like this when we connected to our office VPN over PPTP and the builtin windows VPN client. I'm not a huge expert on the topic, so any hints will be appreciated.

  Read the article

• How to diagnose remote assistance problem

  - by cantabilesoftware

  I have a long standing issue with remote assistance between a home and work PC. My wife and I both use MSN messenger and I used to be able to control her PC at home via MSN Remote Assistance. Some time ago however this stopped working and I don't know why. We're both running the latest versions of MSN Live Messenger and I've checked the appropriate firewall ports are open, but it still doesn't work and MSN just says something useless like "The person isn't responding". Any suggestions for how can I diagnose this? More info: I just tried direct Remote Desktop between work PC and home PC and it works fine - so I presume all the appropriate ports are open. Just Remote Assistance doesn't work. I'd like to get RA working so I can demonstrate how to do things remotely. With Remote Desktop the person at the other end gets booted off and can't see. With Remote Assistance they can follow along step by step. Some comments below suggest using other solutions, which is fine and do work, but there must be a way to diagnose RA and get it working. Experimenting with this some more, the notebook that I was using at work today that refused to connect works fine for remote assistance when I bring it home. So I guess this must be a problem with our network configuration at work. I've checked that 3389 is open on firewall on office router and remote desktop works both ways.... just not remote assistance. I've read that remote assitance won't work if client and server are both behind Non-UPnP/NAT routers. If one has UPnP it's supposed to work. Office router doesn't have UPnP enabled but my home one does. I've also scoured the event logs on both ends, nothing noteworthy - unless I'm looking in the wrong spot). Note (copied from comment): I've just tried ShowMyPC which is based on VNC and it works, but I'd still like to figure out what's wrong with RA - it's just bugging me. The question is only about Remote Assistance, no need to propose solutions based on other programs.[/edit by Gnoupi]

  Read the article

• Registry remotley hacked win 7 need help tracking the perp

  - by user577229

  I was writing some .VBS code at thhe office that would allow certain file extensions to be downloaded without a warning dialog on a w7x32 system. The system I was writing this on is in a lab on a segmented subnet. All web access is via a proxy server. The only means of accessing my machine is via the internet or from within the labs MSFT AD domain. While writing and testing my code I found a message of sorts. Upon refresing the registry to verify my code changed a dword, instead the message HELLO was written and visible in regedit where the dword value wass called for. I took a screen shot and proceeded to edit my code. This same weird behavior occurred last time I was writing registry code except on another internal server. I understand that remote registry access exists for windows systems. I will block this immediately once I return to the office. What I want to know is, can I trace who made this connection? How would I do this? I suspect the cause of this is the cause of other "odd" behaviors I'm experiencing at work such as losing control of my input director master control for over an hour and unchanged code that all of a sudden fails for no logical region. These failures occur at funny times, whenver I'm about to give a demonstration of my test code. I know this sounds crazy however knowledge of the registry component makes this believable. Once the registry can be accessed, the entire system is compromised. Any help or sanity checking is appreciated.

  Read the article

• IPSec tunnelling with ISA Server 2000...

  - by Izhido

  Believe it or not, our corporate network still uses ISA Server 2000 (in a Windows Server 2003 machine) to enable / control Internet access to / from it. I was asked recently to configure that ISA Server to create a site-to-site VPN for a new branch in a office about 25 km. away from it. The idea is basically to enable not only computers, but also Palm devices (WiFi-enabled, of course), to be able to see other computers in both sites. I was also told that a simple VPN-enabled wireless AP/router (in this case, a Cisco WRV210 unit) should be enough to establish communications with the main office. To be fair, the router looks easy to configure; it was confusing at first, but further understanding of how site-to-site VPNs work cleared all doubts about it. Now I need to make modifications to our ISA Server in order to recognize the newly installed & configured "remote" VPN site. Thing is, either my Googling skills are pathethically horrible, or there doesn't seem to be much (or any, at all) information about how to configure an ISA Server 2000 for this purpose. Lots of stuff on 2004, of course; also, I think I saw something for 2006. But nothing I could find about 2000. Reading about 2004, it seems that the only way I can do site-on-site with a Cisco router (read: a non-ISA-Server machine) is through something they call a "IPSec tunnel". Fair enough. However, I can't figure for the life of me how could I even start to find, leave alone configure, such a thing. Do you, people, happen to know how to do IPSec tunelling on a ISA Server 2000, so I can connect to a Cisco WRV210 VPN-enabled router, and build a site-to-site VPN for both networks? Or is this not possible at all? (Meaning I should change anything in this configuration to make it work...)

  Read the article

• Is Cloud Print to blame for my inability to print?

  - by VarLogRant

  I have just moved to the Chrome beta (first 9.something and currently 10.0.648.127) on my Windows 7 64-bit machine, and my good web browsers (Firefox Beta and Chrome) can no longer print, and neither can Komodo Edit. The problem seems to have started when I tried to enable Google Cloud Print. Frustratingly, I can still print from IE 9 RC, and also from other machines in the office, which means the problem is entirely on this Windows machine. When I try to print from Chrome, first time I get the printer dialog, and once I click print, it waits, then pops up "Something went wrong", and each time after, it pops up with "No Printer Found". Under Firefox, I get "An unknown error occurred while printing", as does Komodo. I have printed from these applications before, and have even printed from Google Cloud Print. Once. But then it stopped. I really don't know where to go next in debugging this thing, and the Google results I see tend to be from 2007. I'm not ready for the paperless office yet, so please help!

  Read the article

• Pair programming with tmux and Vagrant

  - by neezer

  Does anyone have a clear step-by-step guide for setting up a shared tmux session on a Vagrant vbox that my coworkers (on our local office lan) could SSH into? The articles I've found online only seem to cover setting this up from machine to machine (no virtualbox setups), and I'm not very good at networking, so I haven't been able to extrapolate a solution... We're all running the latest Macs in our office, btw. Here's one article I've found but haven't been able to get working with Vagrant: http://blog.voxdolo.me/remote-pairing-with-vim-and-tmux.html EDIT: To clarify, I don't really know how I should be setting up Vagrant to allow me to SSH into it from a machine outside the one hosting the VM. The article above suggests that I add the tunnels host on my physical machine running the VM (here-on referred to as the MBP), so I did that. Next is the ProxyCommand host declaration, which I have also assumed should live on the MBP. So next I try SSHing into the MBP from a guest machine (another separate physical machine on my network), and that seems to work... but that only gets me into the MBP, not the Vagrant image running on the MBP. I normally login Vagrant image on the MBP via vagrant ssh (per the docs), and I know how to forward ports on the Vagrant VM to the MBP, but it's unclear to me how I could forward ports/SSH from the MBP to the Vagrant VM, which I assume I would need to do so that my guest machine could SSH in--through the MBP--to my Vagrant image. That, in a nutshell, is what I'm trying to accomplish. I do my development work in Vagrant VMs which keeps my MBP nice and clean of any dev-related cruft and also keeps my dev environments totally isolated from one another, yet I would like to start pair-programming with my coworkers via tmux, thus the reason why I've asked this question. I would like to accomplish all of this without setting up an additional user account on the MBP, or giving my coworkers access to my local user account on the MBP to get to my Vagrant VM, if that's at all possible.

  Read the article

• Having trouble mapping Sharepoint document library as a Network Place

  - by Sdmfj

  I am using Office 365, Sharepoint Online 2013. Using Internet Explorer these are the steps I have taken: ticked the keep me signed in on the portal.microsoftonline.com page. It redirects me to Godaddy login page because Office 365 was purchased through them. I have added these sites to trusted sites (as well as every page in the process) and chose auto logon in Internet explorer. Once on the document library I open as explorer and copy the address as text. I go to My Computer and right click to add a network place and paste in the document library address. It successfully adds the library as a network place 30% of the time. I can do this same process 3 times in a row and it will fail the first 2 times and then succeeds. It works for a little while and then I get an error that the DNS cannot be found. I need multiple users in our organization to be able to access this document library as if it was a mapped network drive on our local network. Is there an easier way to do this? I may just sync using the One Drive app but thought that direct access to the files without worrying about users keeping their files synced.

  Read the article

• Why does Outlook 2007 lose connection to Exchange when Windows 7 64-bit turns off display?

  - by Greg R.

  The problem: When Windows 7 puts the display to sleep, Outlook 2007 and also Microsoft Office Communicator 2005 lose the connection to the Exchange server. When I unlock the computer, Outlook is logged out of Exchange and prompts me for credentials (although usually I have to restart Outlook to get it to reconnect). The network connection is still active, e.g. other applications don't lose their connection to the network or Internet when Windows 7 puts the display to sleep. I'm using a Dell E5400 notebook running Windows 7 Enterprise 64-bit with Outlook 2007 connecting to a corporate Exchange server (not sure if it's Exchange 2007 or 2010). The Dell is typically docked and connected via DVI (through the dock) to two Dell monitors. The Power Options in Windows 7 are set as follows: Turn Off The Display: 15 minutes Put The Computer To Sleep: never Those are the "Plugged In" settings but the problematic behavior is the same when running on battery. When Windows 7 turns off the display, it automatically locks the computer. E.g., I have to re-enter my credentials to access the machine. This is per corporate policy. The equivalent set up on my previous Dell notebook running Windows XP SP3 did not result in this problem with Outlook 2007 or Office Communicator 2005 connecting the very same exchange server. The problem began when I switched to the new Dell E5400 with Windows 7.

  Read the article

• What is it safe to let Revo Uninstaller cleanup leftovers?

  - by msorens

  I have been a user of Revo Uninstaller (free) for sometime and find it does a very good cleanup job with typical applications. Today I wanted to clean up my machine a bit more so I proceeded to remove Visual Studio 2005 with Revo Uninstaller. The VS installer removed the app with no issues, then Revo reported about 20,000 leftover registry keys. I am used to basically just see Arpcache and Muicache... since I am not a registry expert I had no clue about most of the 20,000 listed. So I backed up the registry then let Revo remove the 20,000. It next reported about 1500 leftover files which included my Microsoft Office applications(!) that I knew it should not be touching. So I did not delete any files with Revo. Suspecting that some of the removed keys were also Office-related, I tried to open Word and Excel, both of which knew something was up, as the installer kicked in (albeit just briefly) for each of them. At this point, since I knew there were issues, I just restored the registry and I am now (seemingly) running OK. My question, then: When is it safe to trust Revo Uninstaller? As a seasoned software professional, my own answer to this would be the obvious "When the keys it reports are something you understand and know are safe to delete" but then that makes Revo of little use except to registry experts, does it not...?

  Read the article

• Terminal Server in Windows Server 2003

  - by Hemal

  I have a confusion regarding what I am doing here. At present I have a Windows Server 2003 server with SP2. I have assigned RAS/VPN server role to it (through Manage my server wizard) and in my router, I setup the IP address of my RAS/VPN server as PPTP server. Staff leave their workstations ON all the time and access them from home through RDP. They first connect thorugh VPN & in the RDC they simply type their respective IP or computer name to access the office network from home. Everything works fine so far except: Staff have to leave compuers always ON in the office Speed is very slow depend how many staff members access the VPN network I was told to install and configure Terminal service to improve this situation. I already added TS Role in the server but I don't know how to clients can access the TS server from home or remote location. I really appreciate any good links or guidence from the experts in this group regarding this. Thank you in advance for any replies!

  Read the article

• Simplest DNS solution for remote offices

  - by dunxd

  I look after a bunch of remote offices that connect via VPN - a Cisco ASA 5505 in each office acts as Firewall and VPN end point. Beyond that we keep things as simple as possible in the offices to minimise the support burden. We don't have any kind of server except in offices large enough to justify having someone dedicated to IT. Basically there is the ASA, some computers, a network printer and a switch. One of the problems I am seeing in a lot of offices is that DNS requests looking up hosts inside our network often fail - I'm assuming timeouts due to the offices internet connection (they are all in developing world countries) having some sub-optimal qualities (e.g. high latency caused by VSAT segments, or packet loss. The obvious solution to this is to have some sort of local DNS service that can serve local requests - so I think it would need to do zone transfers from our Microsoft Windows 2008 R2 DNS servers at HQ. However, simply installing Windows Servers in each office is both expensive, and creates a support burden. This got me thinking about pfsense/m0n0wall on embedded devices - those can act as a DNS server, and could be configured at HQ and sent out as just something that needs to be plugged into the network and can then be forgotten about by the staff locally. Maybe there are some alternatives to the ASA 5505 that include some DNS functionality. Has anyone here dealt with the problem, either using some kind of embedded device, or found some other solution? Any gotchas or reasons to avoid what I have suggested?

  Read the article

• SharePoint, Exchange and Incoming Emails Without Directory Management Services

  - by Nariman

  Trying to keep this as simple as possible. We've already created the email accounts that we need (e.g. account[1-20]@domain.com) on Exchange/AD. We'd like to now enable incoming emails on SharePoint 2007 lists corresponding to these accounts. My thinking is we don’t need to configure Directory Management Services [2] – the architecture will be simpler without it and the application doesn’t require these services. However, we still need to route messages from Exchange to either local SMTP services (via the connector described in the articles below) or by user-specific drop-folder settings (if permitted by Exchange). So the question is: can we instruct Exchange to use a drop folder just for accounts account[1-20]@domain.com? or do we need to change the accounts to account[1-20]@sharepointsmtp.domain.com and re-route those message to the local SMTP service that will drop them on disk? I've read the material below. [1] - http://www.combined-knowledge.com/Downloads/2007/How%20to%20configure%20Email%20Enabled%20Lists%20in%20Moss2007%20RTM%20using%20Exchange%202007.pdf http://social.msdn.microsoft.com/Forums/en/sharepointdevelopment/thread/91e0c3d2-afe6-469d-b1bc-6ae7a9aa287e http://gj80blogtech.blogspot.com/2009/12/configure-incoming-email-setting-in.html http://www.jasonslater.co.uk/2007/08/10/configuring-incoming-mail-on-moss-2007-and-exchange-2007/ http://technet.microsoft.com/en-us/library/cc262947%28office.12%29.aspx http://technet.microsoft.com/en-us/library/cc263260%28office.12%29.aspx [2] – http://graycloud.com/sharepoint/incoming-mail-configuration-what-permissions-are-require-t39483.html

  Read the article

• Microsoft Access: computer freezes when user tries to update record

  - by CarlF

  A colleague and I have developed an Access 2003 database which is used throughout our department. Currently about four dozen people do data entry using one of two very similar forms. If 47 of us use them, they work perfectly. If Mr. 48 clicks the "Save" button, Windows XP freezes and a hard reset is needed. The problem has to be on his specific computer (Dell latitude D630) and not in the code because this problem only affects him. Complicating the matter: I don't work for IS, and this project is not supported by IS. If I'm going to get our tech support to fix the problem I had better be able to explain exactly what to do and how to do it, because they aren't going to invest any resources. I don't even have admin rights on the computer (and neither does its regular user). I've asked him to bring his laptop the next time he visits my building. (Just to make matters worse, he doesn't usually work in the same location as me or the other developer.) Any suggestions on debugging the problem? My first try will be to uninstall and reinstall Office, which I can do using corporate utilities without being admin. Note: yes, those are old versions of Office and Windows. We expect to upgrade later this year.

  Read the article

• Mac mini simple customized, Mac mini server or other?

  - by microspino

  I'm in front of a big IT choice for my little office and I need some advice. We have 5 users, 1 super user, 1 HP500 DesignJet Plotter, other 4 laser printers, 1 HP Fax/Print/Scan/Copy machine. All the clients are XP Sp3 boxes. We would like to: centralize and share 90Gb of files using a Dropbox (this way we will have LAN sync of local working directories + internet backup + access our files wherever we are). centralize our plotter, printers and fax machine backup all the workstations share outlook calendar and tasks run 24x7 saving some energy Of course this setup It's just the first step to a more serious and creative network management of our office, so we are open to new ideas. The budget vary from 400€ to 900€, we are not tech gurus but at least one of us is a power user close to become a geek. I've read some articles on macminicolo about a mac mini either normal or with snow leopard server. I heard about Windows Home Server too on the lifehacker website but I'm in a sort of analysis - paralysis can You help me?

  Read the article

• Preventing applications from performing run once tasks for multiple users

  - by JohnyV

  In our environment we have several applications that are installed that have a need to run a little prompt the first time they run eg Media player, Google earth etc. The problem is we have many users on many different computers. And the computers have deepfreeze running on them which removes the users profile once the computer is restarted. So next time that user logs in they have to go through the whole thing of run once again. I have managed to prevent IE runonce using group policy and office run once from using the office customisation tool. Is there a way to make this happen for other applications. On windows xp we used to copy a user that has run all the apps and place their default profile into the default profile so that new users get that profile template. Now with windows 7 the process of copy profiles is not as easy. Is there an easy way to copy profiles in win 7 or is there a better way (eg modify reg or app data) to prevent apps from performing an initial run. Thanks

  Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >