Search Results

Search found 7940 results on 318 pages for 'intel wireless'.

Page 94/318 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

• Can't set-up Wifi Adhoc on my Raspberry Pi with an USB dongle

  - by Wouter

  I am trying to set-up an access point (ad-hoc) for my Raspberry Pi. That means I'm trying to "share" the ethernet connection over Wi-Fi. I am doing this using my Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter. When following a tutorial (or actually every tutorial), it immediately goes wrong. root@pinkypi:/home/pi# iwconfig wlan0 mode ad-hoc Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; Device or resource busy. I already tried ifdown and not having it in the USB port at the startup. If it helps, every action with the thing fail (or at least setting the mode). I am using Debian. I'm sure I'm overseeing something, but I can't find out what. What is wrong?

  Read the article

• Intel i7 vs Xeon quad core processor?

  - by jasondavis

  I know the Xeon processors have been around for a long time and are mostly used in servers but I am curious, why do people not use the xeon's in a high performance desktop? As far as I know about the best desktop processor out there now is the i7 line. The i7's and xeons are both quad-core processors, what is the main difference in these? I just saw that the mac pro's are using the quad core xeons instead of the i7's

  Read the article

• Mac OS X: network disabled because security breach

  - by fireeyedboy

  Dear all, I just recieved a message on my Mac OS X system telling me (loosely translated from Dutch): "The network has been temporarily disabled because the network's security was breached." (It's a wireless WPA2-PSK secured network BTW) I looked in the logs of my router (a Zyxel P-2602HW-D1A) only to see a few (outbound) "syn flood TCP ATTACK" logs, but those were from like a week ago, other than that nothing. What tools on Mac OS X do I have to analyse this security breach occurence? Are there some security logs on Mac OS X that I can inspect? What other measurements should I take? And how serious should I take this warning from Mac OS X? System: Macbook Pro Intel Core 2 Duo 2.2 Ghz OS: Mac OS X 10.5.8 Network: wireless WPA2-PSK Relevant software: Parallels Desktop with Windows XP (was open, but stopped at the time) Other systems on my network: Windows XP SP3 desktop (was running at the time) If you need any more info, don't hestitate to ask. Thanks in advance.

  Read the article

• New SSD freezing on older motherboard (intel G31)

  - by DJM

  I have an ECS G31T-M motherboard running a Core2 Quad processor, 4gb RAM, Windows 7 32bit, Geforce 9600GT. Bought a Sandisk Extreme III 120GB (SDSSDX-120G-G25) and installed today. I'm outputting this from my 9600GT with included TV-out adapter to Component video (to my HDTV). This motherboard is SATA 2 and from what I can tell, SSDs run on the IDE controller and there is nothing fancy to set up advanced features of SSDs. I've noticed on other forums (but not verifying with ECS) this board does not support AHCI. I have two versions of Windows 7 installed on two drives, the SSD and an old 500G disc drive. When booted from my older 500G HDD, video plays fine on the HDTV. When booting the SSD windows 7 install, I am freezing constantly, as in, video plays OK for a minute, then picture freezes for 1-3 minutes (sometimes as audio continues playing) and returns for 20-30 seconds before doing the same thing again. Other tasks such as basic maneuvering through file folders seems to be no problem. Please help!! Do I need a new system for this thing to work, or could there be other fixes? I updated firmware to R201 to no avail. DJM

  Read the article

• How to get Windows 7 to automatically connect to an ad-hoc network?

  - by George Edison

  I have two machines - one is running Ubuntu 12.04 64-bit and the other is running Windows 7 Starter Edition (32-bit). The Ubuntu machine is connected to the Internet via the eth0 interface. That machine also has a wireless network interface (wlan0) that is currently functioning as an ad-hoc network. I can connect to the ad-hoc network just fine with the Windows machine but each time I wish to do so, I must manually initiate the connection and enter the password. Is there some way to instruct Windows to automatically connect to this network (an option I have for standard wireless networks but not ad-hoc networks)?

  Read the article

• DDWRT or similar as repeater in a network.

  - by Quantumplation

  I have a friend with sever connection issues due to her wireless router being on the bottom floor of her house, and the computer being a story or two away. I have several old Linksys routers lying about, one of which is currently running DDWRT for my network. Would it be a good idea (effective) to configure one of these routers as a wireless bridge of some kind in an intermediary floor to improve her connection? Is there any specific configuration beyond the standard DDWRT setup that I would need to do? Thanks for your help. =)

  Read the article

• Network Bridging for WiFi-to-Ethernet in linux

  - by shakaran

  It is possible Network Bridging for WiFi-to-Ethernet in linux instead of Ethernet-to-Ethernet? I have a CentOS 6.3 machine. I am using KVM and I want perform a brigde for virtualize more machines. This machine is connected only via wireless connection and it doesn't have a ethernet connection. So, I did a bridge over the WiFi interface like: # cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE="br0" NM_CONTROLLED="yes" ONBOOT=yes TYPE=Bridge BOOTPROTO=none IPADDR=192.168.1.50 PREFIX=24 GATEWAY=192.168.1.1 DNS1=8.8.8.8 DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System br0" Then I edit my wireless conection like: # cat /etc/sysconfig/network-scripts/ifcfg-mywireless ESSID="mywireless" MODE=Managed KEY_MGMT=WPA-PSK WPA_ALLOW_WPA2=yes CIPHER_PAIRWISE=CCMP CIPHER_GROUP=CCMP TYPE=Wireless #BOOTPROTO=none #IPADDR=192.168.1.50 #PREFIX=24 #GATEWAY=192.168.1.1 #DNS1=8.8.8.8 #DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="Auto mywireless" UUID=874***** ONBOOT=yes LAST_CONNECT=1355923469 BRIDGE=br0 After, I restart the network: # /etc/init.d/network restart Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface Auto_mywireless: Error: Unknown connection: 874***** [FAILED] Bringing up interface br0: [ OK ] But as you can see, it show a error. My ifconfig output shows now: # ifconfig br0 Link encap:Ethernet HWaddr 6E:20:AD:CE:D8:AB inet addr:192.168.1.50 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6c20:adff:fece:d8ab/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:6393 (6.2 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:432 errors:0 dropped:0 overruns:0 frame:0 TX packets:432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:62433 (60.9 KiB) TX bytes:62433 (60.9 KiB) ra0 Link encap:Ethernet HWaddr 00:22:F7:2B:87:E5 inet addr:192.168.1.42 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::222:f7ff:fe2b:87e5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:46 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:487894880 (465.2 MiB) TX bytes:148136473 (141.2 MiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:5B:30:9A inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:70 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:5838 (5.7 KiB) But this doesn't give internet connection and I loss access to 192.168.1.50. So, it is possible setup this networking bridge WiFi-to-Ethernet?

  Read the article

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

• Intel mobile CPU power consumption at idle levels?

  - by Ivan Petrushev

  I was wondering if someone has observations (or specifications) of different mobile processors power consumption levels when idle? Let's define 'idle' with 'browsing web sites trough wifi, no flash, no multitasking'. There are different series processors, recognizable by their first letter. The letter tells about the maximum TDP. For example: T - 30-39W P - max 25W L - 12-19W U - <12W However this is about maximum consumptions during load. Is there any difference in power levels when the CPU is idling?

  Read the article

• S3200SH error 5220 every boot (CMOS/NVRAM Cleared by jumper)

  - by TechAUmNu

  I have a S3200SH Intel server board with a Intel Xeon 3220 Quad Core. Every time I boot it, I get error 5220 (CMOS/NVRAM Cleared by jumper). The jumper is not installed and I have replaced the lithium battery. The board overheated once, although still seems to work fine apart from this error. Also if I leave the board sitting in the bios for a while it sometimes randomly turns off, with all 4 diagnostic LED's red. I have moved the 2GB DIMM to another slot, which seems to have fixed this problem. Any ideas would be greatly appreciated.

  Read the article

• 2 routers, both DHCP, no IP assigned

  - by piobyz

  I can't get DHCP to assign IP to my wireless devices. My network config is as follows: Nanostation5 Linksys WRT350N, which is connected with Nanostation via its INTERNET port. Nanostation: LAN IP Address: 192.168.1.20 WLAN IP Address: 192.168.0.79 Network Mode: Router and is getting its IP via DHCP from my ISP Netmask: 255.255.255.0 Gateway IP: 192.168.1.1 LAN Network settings: IP Address: 192.168.1.20 Netmask: 255.255.255.0 Enable NAT: YES ENABLE DHCP Server: YES Range 192.168.1.100 ~ 250 Netmask: 255.255.255.0 Enable DNS Proxy: YES Linksys: Internet Connection Type: DHCP Router IP: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP: Enabled Start IP: 192.168.2.100 ~ 120 Advanced Routing: NAT: Enabled What I can do is connecting manually with this config: IP: 192.168.2.101 Subnet Mask: 255.255.255.0 Router: 192.168.2.1 DNS: 192.168.1.20 Search domains: WRT350N I want to be able to connect to both routers independently(now its 192.168.1.20 for Nanostation, and 192.168.2.1 for Linksys) and connect any wireless device using DHCP. What should be IP ranges, masks, etc. on both devices?

  Read the article

• How to enable Hardware-assisted decoding in Ubuntu 9.10, specifically for Totem and/or Gnome MPlayer

  - by techtechmo

  Hi all, just wanted to ask about Hardware-assisted 720p video playback on an Intel Atom D510 machine, running on Ubuntu 9.10 Karmic Koala. When I use Boxee with Hardware Assisted Decoding activated, I am able to play 720p videos -- whether on the local harddisk drive or on a remote server, through LAN. However when I play the same 720p videos through Totem or through Gnome MPlayer, the resulting playback suffers from stuttering and slideshow-like slowdowns. Would it be possible to make 720p video playback on Totem and Gnome MPlayer more smooth given that my machine's processor in the Intel Atom D510? If yes, how? Boxee seems to manage, so I assume it should also be possible to tweak Totem and/or Gnome MPlayer to be able to do the same. As an added note, I the machine's OS is Linux Mint 8. Installed RAM is 2GB.

  Read the article

• Configuring Wireless on Cisco 851W

  - by Aequitarum Custos

  Either a powersurge or something caused our router's configuration to get wiped, and our last backup was before the wireless network was setup. We have not been able to reconfigure the wireless since then, so was curious if anyone here would be able to determine what configuration is needed. We are using a Cisco 851W running 12.4(15)T9 We would like to use WPA encryption, and have it on the same network as the rest of the office network. Config file is below: User Access Verification Building configuration... Current configuration : 3857 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption no service dhcp ! hostname BOB ! boot-start-marker boot-end-marker ! enable secret 5 ********************* ! no aaa new-model ! ! dot11 syslog no ip source-route ! ! ip cef no ip bootp server ip domain name BOB.com ip name-server 61.11.1.1 ip name-server 61.11.1.2 ! ! ! username BOBB privilege 15 password 7 ************************* ! ! archive log config hidekeys ! ! ip tcp synwait-time 10 ! ! ! interface FastEthernet0 no cdp enable ! interface FastEthernet1 no cdp enable ! interface FastEthernet2 no cdp enable ! interface FastEthernet3 no cdp enable ! interface FastEthernet4 description WAN Connection$ETH-WAN$ ip address 61.11.1.14 255.255.254.0 ip nat outside ip virtual-reassembly duplex auto speed auto no cdp enable ! interface Dot11Radio0 no ip address shutdown ! encryption mode ciphers tkip speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root no cdp enable ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no cdp enable bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding ! interface Dot11Radio0.20 ip access-group Guest-ACL in no cdp enable ! interface Vlan1 description Internal Network ip address 192.168.2.60 255.255.255.0 ip nat inside ip nat enable ip virtual-reassembly ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 61.11.2.14 ! ip http server no ip http secure-server ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended Guest-ACL deny ip any 192.0.0.0 0.0.0.255 permit ip any any ! access-list 1 permit 192.0.0.0 0.0.0.255 access-list 100 remark SDM_ACL Category=2 access-list 100 permit ip 192.0.0.0 0.0.0.255 any no cdp run ! control-plane ! !

  Read the article

• Intel mobile CPU consumption at idle levels?

  - by Ivan Petrushev

  Hello, I was wondering if someone has observations (or specifications) of different mobile processors power consumption levels when idle? Let's define 'idle' with 'browsing web sites trough wifi, no flash, no multitasking'. There are different series processors, recognizable by their first letter. The letter tells about the maximum TDP. For example: T - 30-39W P - max 25W L - 12-19W U - <12W source However this is about maximum consumptions during load. Is there any difference in power levels when the CPU is idling?

  Read the article

• How do I set up a shared internet on a network using computer hooked up to a router

  - by Skadlig

  I got a wireless broadband modem (Huawei E1750) hooked up to my computer (call it A., running Windows-7) whose internet I wish to share to my other computer (call it B., also running Windows-7). A. is hooked up to my d-link DIR-600 router using a wired connection to port 1 on the router. B. is connected to the router using a wireless connection. Now I have tried setting up the sharing according to the help files for ICS but I have not been able to get it working. I suspect that there is something in my hardware configuration that is making it difficult. I would appreciate some tips and pointers as to what could be the reason to my problems.

  Read the article

• Windows XP unknown location popup annoyance

  - by mcgyver5

  I'm plagued by a popup from Windows XP when I use wireless. It says, "You are in an Unknown Location..." It always pops above whatever window I'm using, but does not take focus, so while it does not interrupt my typing, it gets in the way and I can't dismiss it with a keystroke. I'd like to find a way to disable this popup. I've searched in control panel -- Network Connections. I'm not referring to "balloon tips" that appear related to the wireless connection in a new location.

  Read the article

• Internet connection slower than network connection speed

  - by Mike Pateras

  I've got a computer connected to a wireless router on a different floor. When I look at the network connection, I'm told the signal strength is low, and that I've got a connection of about 26mbps (often higher). However, my internet connection on that machine is very slow. Speedtests show it at about 1-2mbps, and it really shows when loading pages and video. I have fiber optic internet access, and the machine that's connected to the router/modem via cable gets the 20mbps on speed tests, and is extremely fast in every day use. My question is, is the advertised 26mbps+ connection speed perhaps inaccurate, and that my wireless bandwidth is the likely bottleneck here? Or is the signal strength what's key here? And what might I do about this? Power cycling the router helped a bit, a speed test went as high as 6mbps after doing that.

  Read the article

• How to use Ralink RT2501/RT2573 as wifi access point in Debian Linux

  - by user60813

  Hi, I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable. I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that. I have tried installed wicd, but it does not help. I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff. So my question is: How do I set up this USB wifi card as wireless access point in Debian Lenny?

  Read the article

• Core i7 c1e and speedstepping - BSOD on shutdown

  - by DeaconDesperado

  I'm having an interesting problem with my recent Core i7 Digital Audio workstation build that I am curious to see if others have encountered. First, here are the specs on the machine. ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB Intel Core i7-950 3.06Ghz 8M LGA1366 CPU CORSAIR DOMINATOR 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 Western Digital Caviar Black WD5001AALS 500GB Plus a couple ASUS optical drives and a 750W Corsair PSU. Running Windows 7 x64. All this is connected to the nefarious Digi 002 firewire audio interface for use with Pro Tools. I following mostly the specs posted by many other I7 users in the digidesign community who pooled their collective knowledge in this thread. Now after completing my build, I fell victim to the "UD5 squeal" described at that forum thread. So taking the advice posted, I disabled c1e advanced halt state and Intel speed stepping (I would likely have done this anyway to maintain a stable clock, power consumption isn't really a relevant concern on this machine.) I enabled XMP to set the ram timings properly as well. What I am experiencing is a BSOD upon shutdown, but only immediately after windows fully exits and ends all processes. The error is a MACHINE_CHECK_EXCEPTION 0x000000. The funny thing is that it is extremely intermitent and only occurs if the shutdown immediately followed a period of relative idleness. It does not a generate a minidump, I suspect because windows monitoring has terminated by the time this error occurs. No damage is evident and one can simply turn off manually and the system will act as though a proper shutdown had occurred. If anything it is a annoyance, I just want to be certain it is not affecting my long term stability. I have read that the i7 950 does not like DRAM voltages past 1.65, but that they are acceptable if they are within .5 of the BLCK setting. I have tried disabling XMP and setting all timings to auto and the problem still manifests in an identical way. It is suspect that the cpu idleness preceding shutdown is the determining factor, as both c1e and speedstepping are both settings intended to modify handling of this state. Any suggestions or prior experiences would be greatly appreciated. EDIT: The behavior very closely resembles what's described in this thread: http://www.tomshardware.com/forum/12003-63-shut-problem-windows The benign nature of it of is identical. I can't seem to download the hotfix cited there however.

  Read the article

• Step by step USB Wi-Fi driver install for mint 15

  - by Andy

  I'm running Linux mint 15 32 bit on a Dell inspiron 2200. I have given up trying to get the Broadcom BCM4318 built in wireless working, so bought a Dynamode Nano 802.11n wireless USB adapter. It came with an install disc. I have no idea how to install it. Could someone please point me in the right direction for full, idiot proof, step by step instructions. I've been using Ubuntu 12.04 but am totally new to mint 15, so best to assume no previous knowledge. Thanks in advance.

  Read the article

• Why would you use EAP-TTLS instead of PEAP?

  - by Ivan Macek

  As I understood EAP-TTLS and PEAP share same level of security when implemented in wireless networks. Both only provide server side authentication via certificate. The drawback of EAP-TTLS can be non native support in Microsoft Windows so every user has to install additional software. The benefit of EAP-TTLS can be support for less secure authentication mechanisms (PAP, CHAP, MS-CHAP) but why would you need them in modern and properly secure wireless system? What are you opinions? Why should I implement EAP-TTLS instead of PEAP? Let's say that I have most Windows users, medium Linux users and least iOS, OSX users.

  Read the article

• How can I make my monitor run at it's native resolution under Kubuntu 9.10?

  - by Adam Matan

  Hi, I have installed Kubuntu 9.10 afresh on an HP desktop computer with a Samsung SyncMaster 2243 and Intel integrated graphics card. The screen resolution is fixed on 1280x1024 instead of the native 1680x1050, which makes my eyes bleed. $ lspci -k |grep "VGA" -A2 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) Kernel driver in use: i915 Kernel modules: i915 and my xorg.conf: /etc/X11$ cat xorg.conf Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection Any ideas how to make this driver work? I found no working solutions on Google searches. Thanks, Adam

  Read the article

• Why is my Wifi connection slower than ethernet even though bandwidth should saturated?

  - by supercheetah

  I'm wondering why it is that my wireless connection is slower than my wired connection for things going to the outside world (so, not files being transferred within the network), which is should be faster than the outside connection, which, I would think, would mean that downloading something like an ISO or other large file from the Internet should be the same either way since that should saturate the connection anyway. Does it have something to do with the encryption (WPA)? Could it have something to do with MTU since the MTU for ethernet can be in the range of 1500 to 9000 bytes, and 2304 bytes for 802.11? Do wireless packets have to be buffered, whereas this wouldn't be an issue with ethernet? What's the math behind the difference?

  Read the article

• My new Intel X25-M G2 and the alignment thingy

  - by Oli

  I just bought a new SSD for my laptop, which is going to be a server running ArchLinux with grub2, GPT and btrfs. My layout should look like this: (grub-partition?) /boot ext2 75MB / btrfs 15GB /home btrfs remaining What do I need to do to create these partitions in a correctly aligned fashion using parted? Do I need to consider alignment when formatting each partition with the desired file system?

  Read the article

• Limited connection whenever I connect to a Wi-Fi network outside the company

  - by anderZubi

  Whenever I connect my work laptop to a wireless network outside of my company, the connection shows as Limited, and there is no internet access. I have tried several times by disabling/enabling the network adapter, restarting the computer... without success. Sometimes, after a while, without taking any action, it shows fine, and I have internet access. But can pass 2 hours before this happens. My computer is under a domain network, but I don't think that's the problem, because I can successfuly connect other computers belonging to same domain to other networks. I'm running Windows 8 Pro and my network adapter is the following: Qualcomm Atheros AR9285 Wireless Network Adapter Any idea of which is the problem and how to solve it?

  Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >