Search Results

Search found 7940 results on 318 pages for 'intel wireless'.

Page 96/318 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

• Force Windows 8 Metro apps to run lower resolutions below 1024x768?

  - by piokuc

  I have installed Windows 8 Consumer Preview on my Samsung NB30 netbook. I was very excited to try it on this little box cause it has a touchscreen and Windows 8 is supposed to be optimized for touchscreen devices. The installation was quick and smooth and all the drivers seem to work well including the one for the touchscreen. There is one major problem, though: when I try to tap one of the tiles on the Metro UI it displays This app can't open. The screen resolution is too low for this app to run. The machine has Intel Atom N450 processor and Intel GMA 3159 integrated graphics card and has maximum resolution 1024x600. I've read that Metro requires at least 1024x768. Is there a solution to this problem? Is there a way to force Windows 8 Metro apps to run in lower resolutions?

  Read the article

• I can't set the resolution to that recommended by my monitor

  - by F4r-20

  Firstly, I have looked here but didn't find what I needed. I have a Dell Optiplex 380 only using the on-board graphics (believe its the Intel G41 Express Chipset) but I can't seem to get the resolution right. The monitor I'm using (HP LE1901w) wants me to use 1440x900 but the only options I get are: 1600 x 1200 1366 x 768 1360 x 768 1280 x 1024 1280 x 960 1152 x 864 1024 x 768 800 x 600 So it will allow me to go higher or lower but not 1440x900. I've tried getting the driver from various different sources (Dell, Intel, Windows 7 Update) but still can't get that option. Does anybody know what else I can try?

  Read the article

• D-Link router WiFi and LAN segment

  - by StreetStrider

  I have D-Link 2650 router. Some wireless and wired clients connected to it. The problem is there is no interconnection between wireless and wired devices. For instance, when I start webserver on PC connected to wired LAN, WiFi devices cannot access it (other wired devices can). However all devices are in the same subnet: 192.168.1.x. How can I connect WiFi and LAN devices to one network? Or maybe what I should know first (any information with which I can proceed)?

  Read the article

• I need a wirless interenet card thingy for my stationary computer

  - by user60859

  Going to move my stationary computer and hook it up to the TV. Which is far away from the wireless router. So i'm going to need a way to go on the Internet wirelessly from my stationary computer. I was looking at some of those.. wireless pci adapter things. But i have no idea which one would be compatible with my computer. How can i tell? oh i have a pentium 4, Windows XP like 600 megs of ram in case any of that matters.

  Read the article

• Intercepting LAN network traffic via WiFi

  - by user1613655

  Let's get straight to the point. This is my fictive network architecture: My question is: Would it be possible for Laptop B to intercept traffic sent and received by Laptop A? Please note that B only has WiFi access and no physical control over Router B. Furthermore, Router A and B create different wireless networks with different encryption keys. If both shared the same wireless network or Laptop B had LAN-access to Router B, the answer would be trivial, but I'm not sure how the answer turns out in this scenario :-/ Thanks for your valuable help!

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• Wifi network stopped being visible (and usable) (Linksys wag320n)

  - by s427

  Basically, my wifi network simply stopped working for no apparent reason. It doesn't appear in the list of the available networks anymore. I can see all my neighbors' networks, but not mine. It's as if it doesn't exist anymore. The internet connection (non-wifi), which goes through the same modem/router, is fine though. I already had a similar problem about one year ago (see here: Wifi network SSID not visible ), just after buying this very modem. I finally got it to work after performing two factory resets and getting rid of the Cisco "Magic" software; but this time it's not working. I use a linksys router-modem (WAG320N) which is directly connected (via network cable) to my desktop computer (Windows 7). I have (mainly) two devices that use the wifi network: my phone (Samsung Galaxy Nexus) and an Asus tablet (TF201, aka Transformer Prime). I also resurrected an old laptop computer (Dell, running Windows XP) to test that, and it doesn't see anything either (apart from the 20 other wifi networks, of course ^^). This wifi network was working just fine and has been for about a year. I haven't touched the modem settings so I have no idea what's causing the problem. I tried: making my phone "forget" about my network, hoping it would see it again after that: no luck. re-entering the network informations (SSID/password) manually on my phone: still no luck (says it's not in range) exporting the modem configuration, resetting the modem (factory reset, via modem admin), restarting it, importing the configuration: nope. factory reset, turning it off for 15 minutes, restarting, re-factory reset, and entering the configuration manually: still nothing. Has anybody experienced something similar before? Have you any suggestion to fix that? Thanks in advance. PS: to clear things up, here are the settings of my modem regarding wifi: Basic wireless settings: Configuration: manual Radio Band: 2.4GHz Wireless Network Mode: B/G/N-Mixed SSID: s427 Channel Bandwidth: Wide - 40 MHz Channel Wide Channel: 9 - 2.452GHz Standard Channel: 11 - 2.462GHz SSID Broadcast: Enable Advanced Wireless Settings AP Isolation: Disable Authentication Type: Auto Basic Rate: Default Transmission Rate: Auto N Transmission Rate: Auto CTS Protection Mode: Disable Beacon Interval: 100 DTIM Interval: 1 Fragmentation Threshold: 2346 RTS Threshold: 2346

  Read the article

• How to get the finer resolution for asus eee pc 1000hd after installing windows7?

  - by vij

  Hi i have installed windows 7 on my 2 year old ASUS EEE PC 1000HD. The default Operating system it came with was windows xp. Now the system is working fine but there are some display problems which i am going to state now: Firstly, during booting windows 7 logo is missing. There are no options for resolution changes. The only option possible is 800x600. The boot time is quite long when compared to xp. The graphics driver used in this system is STANDARD VGA GRAPHICS ADAPTER. The processor is intel celeron with 1GB RAM. I think with these requirements it is possible to get windows 7 with finer resolution. But why these problems are occurring?I even tried to install graphics driver provided by intel for this system. But i ve got the error message "this system doesn't meet the necessary requirements". So how to overcome this problem??

  Read the article

• How to programmatically detect Cipher type and Encryption level from a wireless network device from

  - by amexn

  Now my team working in a network project using windows application c#. I didn't know how to programmatically detect Cipher type and Encryption level from a wireless network device from windows 2003 server. After searching i got WMI (Windows Management Instrumentation) for solving the problem.+ Please suggest example/reference for finding Cipher type and Encryption level from a wireless network device from windows 2003 server

  Read the article

• How to access "Manage wireless networks" in acer netbook (windows 7)

  - by George Kas

  I have windows 7 prof on a aspire acer one netbook. I want to access the "Manage wireless networks" panel from Control Panel - Network and Internet - Network and Sharing Center - Manage wireless networks (on the left bar) I click it, but it just won't open!

  Read the article

• Unable to Use Bluetooth Mighty Mouse or Wireless Keyboard with Boot Camp

  - by Kristopher Johnson

  I have Windows 7 64-bit running on a MacBook Pro in a Boot Camp partition. I am trying to pair with my Bluetooth Mighty Mouse and wireless keyboard under Windows, but whenever I try to do so, here's what happens: While on the Add a device window, I turn on the mouse or press a key on the keyboard, and the mouse or keyboard shows up in the list of available devices. I click the device and then the Next button, and the window displays Connecting to device... Time passes. Eventually, I get this error message indicating that the device could not be accessed. The error code is 0x80070015. I've run Windows Update and Apple Software Update.

  Read the article

• Wireless clients have no route to ethernet clients in OpenWrt router

  - by superjoe30

  I'm using OpenWrt Kamikaze 8.09 on a Linksys WRT54g v1.1 router. I just flashed it with default settings and got everything working, except my wireless laptop cannot ping my desktop which is wired to the router. What can I do to fix this? (My desktop can ping other desktops wired to the router) My routing table: config 'defaults' option 'syn_flood' '1' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'zone' option 'name' 'lan' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'zone' option 'name' 'wan' option 'input' 'REJECT' option 'output' 'ACCEPT' option 'forward' 'REJECT' option 'masq' '1' config 'forwarding' option 'src' 'lan' option 'dest' 'wan' option 'mtu_fix' '1' config 'redirect' option 'src' 'wan' option '_name' 'ssh' option 'proto' 'tcp' option 'src_dport' '22' option 'dest_ip' '192.168.1.100' option 'dest_port' '22' config 'redirect' option 'src' 'wan' option '_name' 'http' option 'proto' 'tcp' option 'src_dport' '8888' option 'dest_ip' '192.168.1.100' option 'dest_port' '8888'

  Read the article

• Setting up Dynamic DNS for Wireless Cameras And Accessing them Remotely

  - by Mike Szp.

  I've been trying to set up two TP LINK wireless N cameras that I bought so that I can see them remotely. I've set it up so that each has it's own ip address (192...105/192...106) and I can access them if I type that into the browser of a local computer The thing is that I don't know how to access them from another remote PC. My current setup is a a each camera connected to the router which then connects to the modem. When I set up the Dynamic DNS, and I access the "webpage" for my IP through a remote computer, it just goes to the configuration page of the modem. I have no idea how to make it go to the router or to the cameras. the router has its own ip range of 192.168.1.x while the modem has 192.168.2.x To access the cameras I type into the web browser: 192.168.1.114:100 on the local computer but I have no idea how to get there through the webpage of my Dynamic DNS remotely.

  Read the article

• Vista machine hardwired cannot see xp laptop on wireless

  - by Kahega

  I have a laptop with windows xp, connected to my wireless router. I am trying to view the shared files on the laptop with my vista desktop computer. The desktop computer is hardwired to the same router. I can see the desktop pc fine on the xp laptop, and view the shared folders. I cannot see the xp laptop when on the desktop pc. I have tried installing the link update for xp, that is not the issue. I have also tried turning off firewalls, no dice. I have scoured google for this issue, and do not see any resolutions. Any suggestions would be appreciated.

  Read the article

• Set up ad hoc wireless connection between Windows Vista and Mac OS X

  - by Skarab

  I have the following problem - Windows Vista does not connect to adhoc wireless network created on my Macbook. I have tried to create secured (with 40 bit key) and unsecured network but Windows Vista still has problems to connect. Windows VISTA informs me -- after 5 minutes of attempts - that setting up the connection -- with my adhoc network -- took too much time. My question: do I need to configure some settings on Vista to connect it to my Macbook? Maybe it is a problem with DHCP? Edited: I have tried the other way: http://superuser.com/questions/202890/set-up-an-adhoc-network-in-windows-vista-to-connect-to-and-share-the-internet-con

  Read the article

• Microsoft Wireless Mouse 5000 Scroll Not Working

  - by Nathan Totten

  I have a Microsoft Wireless Mouse 5000 with Intellipiont 7.1 installed on Windows 7 x64. The scroll has stopped working before, but a restart or two always seemed to resolve it. I tested the mouse on another computer and it worked. I also tested an Microsoft Arc mouse on this computer and the scroll worked. I have checked everything I could find on google and nothing helps. I have reinstalled intellipoint two times. Tried to change my mouse to another model in the intellipoint settings as suggested in many forums. Nothing. If anyone has any suggestions that would be great. Otherwise, I think my next step is to pitch this mouse and get a logitech at Best Buy tomorrow.

  Read the article

• Connecting two pcs through cable, at the same time as wireless

  - by Steffen

  I've got 2 pcs setup with WLAN - however when I copy files between the machines it takes forever (obviously, since I run 801.11g). So I thought, why not just connect them directly with a cable (my wireless router is the other end of the house, that's why I don't use cables to that) However how should I configure the LAN connection on each machine, so I can use it for transferring files between them, whilst using my WLAN to access the Internet ? I was thinking about letting one machine be gateway, but then Windows pops up with a lot of warnings (basically it says this won't work when you're using two disjoint networks) And now I'm at a loss as to what to try.

  Read the article

• Set up ad hoc wireless connection between Windows Vista and Mac OS X

  - by Skarab

  I have the following problem - Windows Vista does not connect to adhoc wireless network created on my Macbook. I have tried to create secured (with 40 bit key) and unsecured network but Windows Vista still has problems to connect. Windows VISTA informs me -- after 5 minutes of attempts - that setting up the connection -- with my adhoc network -- took too much time. My question: do I need to configure some settings on Vista to connect it to my Macbook? Maybe it is a problem with DHCP? Edited: I have tried the other way: http://superuser.com/questions/202890/set-up-an-adhoc-network-in-windows-vista-to-connect-to-and-share-the-internet-con

  Read the article

• Speeding up Connection Between Computer and Wireless/Bridged Router

  - by Justian Meyer

  Hey everyone, I looked through other questions, but didn't find useful responses. Our main computer has a dl speed of 6 Mbps, but some of our other computers are getting only 40-200 Kb! The router is wireless, but all computers are connected using a Netgear Wall-Plugged Bridge XE102, which transmits information via the building's powerline. It can't be the hardware itself, however, because some computers still manage decent speeds. The computers afflicted are running on Microsoft XP Service Packs 2 and 3, but so are computers that are totally functional. These speeds severely impede on productivity and are excruciatingly frustrating when trying to cram in time in the early hours. Could it be an issue with the computer? Location? Router? Many thanks in advance, Justian

  Read the article

• Restarted computer, now wireless and Visual Studio is broken

  - by Earlz

  I installed the new update for TortoiseSVN which requires a restart. Upon restarting a lot of things broke. I'm currently running a virus scan, but what would cause this? Among the things that no longer work is Visual Studio. It now says "Invalid License Data. A reinstall is required" and my wireless internet does not work. When I go to connect to my network it will say "Can not connect" and then when I diagnose the problem it says "The connection to accesspoint-name was cancelled" (and yes, canceled is misspelt like that) What could have caused this? My computer did not install any updates or anything like that upon restarting and it was running fine before I restarted it.

  Read the article

• Windows VPN not authenticating from ADSL to Wireless link

  - by deanvz

  I have a normal windows VPN on a computer connecting to a 196.201.x.x/24 IP. If this VPN tries to connect from any address in the 41.x.x.x range it cant get there. The server is a normal windows 2008 server, running exchange with a PPPoE IP natted to a public IP on the public gateway of the wireless network as the server is on site and its connectivity is derived from Mikrotik RB's. The computer on the 41 range can traceroute and ping the server, but the VPN does not authenticate. When on the network or any other, the VPN works fine. Is there something that could be configured on the VPN client? All firewall settings of a standard ADSL router have been checked and found to block only ICMP's. Is this a VPN configuration problem or a network issue?

  Read the article

• Sharing wireless internet connection between 2 Ubuntu 10.04 systems using cross-over cable

  - by Gary

  I have a Lenovo T60 with Ubuntu 10.04 connected with a cross-over cable to a Dell Vostro 1400, also running Ubuntu 10.04. My internet is coming into the Lenovo through an external wireless antennae, and I want to share the internet with the Dell. On the Lenovo: eth0 connection has IPv4 Settings 'Shared to other computers' I can ping the Dell (10.42.43.10) successfully I can use mtr to trace to www.google.com successfully On the Dell: eth0 connection has IPv4 Settings 'Automatic DHCP' I can ping the Lenovo (10.42.43.1) successfully when I use mtr to trace to www.google.com, I can only reach 10.42.43.1 I must be missing some setting, but cannot see what it is; can anyone help me?

  Read the article

• Linksys Wireless-N ADSL2 WAG160N losing connection

  - by Sam1973

  It seems that recently I have to turn off and then turn on my router every time I want to connect my laptop(s) to the internet. This is what's happens: When I want to connect to the internet on my laptop, the network icon in the system tray states that I am connected to the wireless network but there's no "internet connectivity" I turn off the router and turn it back on and then I can connect to the internet. I am sure there is something that needs to be done. Can you guys point me to the right direction?

  Read the article

• automated printouts from a wireless printer

  - by Piotr

  I have a wireless printer which is always on, and an always on fanless linux server. Looking at the mprinter project on Kickstarter I started to wonder if there is an app somewhere in the internet already that will allow to prepare an automated daily printout based on some settings. things to be printed could include - weather forecast for my locations, todo`s scheduled for that day, a "quote of a day" or "word of the day", stats from google analytics for my site, and many more ... I would set a printout at 6:15 every work day so its on my printer when I am already up, having a coffee. anyone knows something that can be used for such purpose? While I know this can be done by combining the power of TeX, cron and a script language to manage the dynamic part of the PDF I believe this is a use case someone has already addressed.

  Read the article

• WDS (Wireless Distribution System) not work [migrated]

  - by xdevel2000

  I've a dlink di-524 as main router (192.168.0.1) connected to Internet and a second router (192.168.0.2), a tplink wr841n, with WDS enabled and correctly configured to "join" with dlink. After I connect via wireless a laptop (192.168.0.100) to tplink and both work good but with the laptop I can't go to Internet. It seems as WDS not work. With the laptop I can only ping the tplink but other ping (the dlink or other LAN computer not responding). What's the problem? Perhaps also the dlink must have the WDS option? Thanks.

  Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >