Search Results

Search found 19419 results on 777 pages for 'network study'.

Page 94/777 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

• how to change interface ip in ifconfig with /etc/network/interfaces

  - by user2478348

  Hi everybody when modifiying /etc/network/interfaces, saving it and then executing ifconfig i can't see the modification i made..for example here is part of my /etc/network/interfaces: auto wlan1 iface wlan1 inet static address 192.168.0.60 netmask 255.255.255.0 gateway 192.168.0.61 you can see that the IP address of my wlan1 is 192.168.0.60 but when typing ifconfig i have this: wlan1 Link encap:Ethernet HWaddr 00:19:70:0f:c2:9c inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::219:70ff:fe0f:c29c/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:758 erreurs:0 :0 overruns:0 frame:0 TX packets:610 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:73490 (73.4 KB) Octets transmis:127883 (127.8 KB) (the inet adr:192.168.0.1 and not 198.168.0.60)..if someone can help me I'll be very thankful :)

  Read the article

• Does Cisco anyconnect replace original network connection session?

  - by Stan

  When using Cisco anyconnect VPN, it seems the existing network connection is still going through old connection session (Is there any way to find out)? The reason is because when using Cisco VPN client connect to gateway, usually the Messenger Live, Skype will be disconnected and requires to reconnect. But using anyconnect doesn't need to reconnect. So I am guessing if those old sessions still go through original network connection. Which means, both connection is existing at the same time. Take my case for example: connection 1: wireless NIC - cable modem - my cable ISP - internet connection 2: anyconnect - wireless NIC - cable modem - my cable ISP - VPN gateway - internet Am I correct? Is there any way to check this? Thanks.

  Read the article

• Setting up Kerberos SSO in Windows 2008 network

  - by Arturs Licis

  We recently introduced Kerberos (SPNEGO) Single Sign-on in our web-portal, and tested it on a Windows network with Windows 2003 domain controller. Now, trying to test it on Windows 2008 R2 controlled network, SSO just doesn't work due to defective tokens. Up to the moment I was pretty sure that there's something wrong about environment and that were NTLM tokens. We double checked IE settings etc, but nothing helped. Then we checked the following settings for both users (logged on a client test-machine, and the one used as a Service Principal): This account supports Kerberos AES 128 bit encryption. This account supports Kerberos AES 256 bit encryption. .. and error message changed to ' GSSException: Failure unspecified at GSS-API level (Mechanism level: Encryption type AES256CTS mode with HMAC SHA1-96 is not supported/enabled) It makes me think that Internet Explorer receives Kerberos tokens at all times, and there's just some configuration missing, or it was ktpass.exe to be incorrectly executed. Here's how ktpass.exe was invoked: C:ktpass /out portal1.keytab /mapuser USER /princ HTTP/[email protected] /pass *

  Read the article

• Add a netbook to an existing Windows XP home network

  - by GorillaSandwich

  I've got a home network set up with a couple of Windows XP computers. I'm now trying to add our new netbook to it - also running XP. (The goal is to share files and a printer.) I have run the Network Setup Wizard and made sure that the workgroup name is the same as the others, and have rebooted several times, but whenever I try to 'view workgroup computers,' the only one on it is the netbook. I have a Windows XP CD, but the netbook has no drive. The wizard has some options for floppy disks, but that's useless to me these days. What is this wizard actually trying to do, and can I do it manually? Surely it can't be this hard.

  Read the article

• Speed up file access on home network

  - by kurasa

  I have 2 PCs (Windows 7 Ultimate) and a Mac running Windows 7 using vmware fusion on my home network tied together using WRN1000 NETGEAR Router On one of the PC's I have a set of file (MYOB .myo). These use a data source to access the data in the files. Operations (reading,writing) to the .myo on the PC which hosts the files is fine but the other 2 it is painfully slow/unreliable and I am wondering what I can do to speed this up. Some ideas I have are 1. Turn off the Windows firewall on all the windows installations on the home network 2. Buy another router. Specifically a router which I can connect a USB flash drive on the back where I can put the .myo files and all the PC can access the files from the USB flash drive on the router (does this speed things up?) Any advice greatly appreciated on how I can speed up this access to data

  Read the article

• Ubuntu problem not connecting to wireless or wired network

  - by ToughPal

  I recently installed openvpn and things were working. But I got a weird screen after a few hours and on restart my wired and wireless connections are not working. Can someone help? cat /etc/network/interfaces auto lo iface lo inet loopback cat /etc/resolv.conf #Generated by NetworkManager Is there anything missing? I tried both wired and wireless and both are not working. Usually if I ever have a problem with wireless, the wired always work! My /etc/network/interfaces is looking wrong. Can you please send me yours? I am using ubuntu 9.10 and the internet was working correctly until today! Please help

  Read the article

• See network computer description in Explorer

  - by John Gardeniers

  When viewing the list of network computers in Windows Explorer on a Win 7 machine there appears to be no way of readily seeing the description field, which makes that pretty well useless. I believe this problem started with Vista but I'm seeing it for the first time because I was fortunate enough to skip over Vista. We're currently rolling out Win 7 on new boxes and although I'm changing the naming system to something more sensible, the old boxes have names such as FWS01, FWS02, etc. Managing a network of computers with such names is made more difficult when you can't readily see who's machine each one is. Googling the problem brought up a workaround involving creating a shortcut on an XP machine and copying that to the Win 7 box but that's a long way from ideal. Is there some kind of hack that can be applied to machines, the operator of which needs to be able to see the description field?

  Read the article

• Unexpected multiple network connections on Windows Vista

  - by Jens

  My Network and Sharing Center shows multiple connections to the internet, where only one is expected: My internet access works fine, but since the "Unidentified Network" is set to public after each boot, sharing and network discovery don't work as well. Similar questions on Google point mostly to the Bonjour service, but I am sure that this is not, and never was, installed on this machine. So: How can I get rid of the unidentified network? Output of ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : ***** Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mySuffix Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mySuffix Description . . . . . . . . . . . : Intel(R) 82567LF-3 Gigabit Network Connection Physical Address. . . . . . . . . : 00-19-99-65-F0-B2 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::c90:2d23:7651:42f%10(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.141.130(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 13 November 2012 09:40:54 Lease Expires . . . . . . . . . . : 21 November 2012 09:45:01 Default Gateway . . . . . . . . . : 192.168.141.109 192.168.141.108 DHCP Server . . . . . . . . . . . : 192.168.141.120 DHCPv6 IAID . . . . . . . . . . . : 218110361 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-DD-00-AF-00-19-99-65-F0-B2 DNS Servers . . . . . . . . . . . : 8.8.8.8 8.8.4.4 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 13: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : mySuffix Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes

  Read the article

• Some domain names not resolving on local network

  - by Solignis

  I am not really sure where to start with this one... I have a small network setup with some linux servers (Ubuntu 11.04 Server). 2 servers are running BIND 9 (NS01, NS02), they are configured as master and slave respectively. 1 server is running Zimbra ZCS 7.1.1 (MX01), it has a private BIND 9 server running to achieve a split DNS configuration. This DNS server does not interact with the other two, it forwards queries it can resolve to the other 2 that is it. No zone transfers. Zimbra is hosting 3 domains at the moment, solignis.local, solignis.com, campbellsurvey.net. The problem From with in my network I cannot connect to mail.campbellsurvey.net. When I mean I cannot connect, I mean if I open firefox and type https://mail.campbellsurvey.net I go nowhere, the address is supposed to connect to my Zimbra webmail. But it goes nowhere, the odd thing is if I try the same task from outside of the network it brings the website up like normal. If I try to create an account in thunderbird to connect to the same server using IMAP4 or POP3 I get an error saying that thunderbird cannot find the domain name. Even the zimbra client fails too. It is like from with in my own walls that campbellsurvey.net does not exist. But if step outside I can get it work with no problem at all. I had thought maybe the problem was with the DNS server (BIND 9), so just to eliminate it as a possibility I configured a windows server I use for VMware VCenter as a DNS server to see what would happen. The result was the same, its like something is preventing connections to those domains, but I have checked various firewalls and such. I checked port forwards, etc. So I am running out of ideas I know this is not a lot of information to work from and I can give more details about certain things as needed. I am just trying to figure out what could be going wrong. Any help you could offer would be much appreciated.

  Read the article

• Steps to make sure network is not blacklisted...Again

  - by msindle

  I have an interesting issue. I have a client that just got blacklisted due to spam being sent out over the last 2 days. I have my firewall configured to only allow mail to go outbound on port 25 from our mail server (Exchange 2010) exclusively and I have verified that there are no open relay's on our transport rules. We are running Vipre Business and after running deep scans with updated definitions all computers come back clean. I ran a message tracking report on our Exchange server that shows all mail sent via the mail server over the last couple of weeks and didn't see anything malicious or out of the ordinary. I have also verified that there are no home devices or rouge computers on the network. For all practical purposes it appears that the network is clean, but we still wound up on 5 or 6 blacklists...Where should I start looking next? Is there a "best practices" guide that can help eradicate this issue? Thanks in advance! msindle

  Read the article

• Windows 7 wifi reports "no network access" and "no internet access" but connects in fedora

  - by rick2047

  I am running windows 7 home basic (64bit) on a Acer 5742G laptop with Atheos wifi adapter in it. Yesterday, I hiberneted my computer as I always do and up untill then the wifi was working fine. When I booted my computer up again today I started having a strange problem: It detects my wifi but after connecting to it, it keeps on oscillating between states of no network access and no internet access. I can't connect to anything (the internet or my router). I tried to reset my internet protocol stack using this fixit file. I also tried to uninstall and reinstall my network driver. Neither helped. I am using the same laptop's fedora installation right now and the wifi is working perfectly fine. Please help. Edit To add additional details, I have Microsoft Security essentials as my antivirus software and I haven't messed with the firewall or the router configurations.

  Read the article

• Install a program from the network

  - by Gomibushi

  In Windows there is a place under the Control Panel called Get Programs and Install a program from the network (in Win 7 at least), possibly a slightly different name in Vista, but it was there too. The question is basically: How do you publish programs to that so users can go there and install? Bonus follow up: Is it a good way to deploy optional programs? (Compared to using GPO's.) In Windows 7 you can go to Control Panel, Programs, Programs and Features, and on the left hand menu: Install a program from the network.

  Read the article

• Can a virtual mikrotik box bridge a hyper-v internal network with a hyper-v external network?

  - by mcfrosty

  I am trying to set up a Mikrotik router as a transparent firewall on my network. I got the machine working on a hardware MT box, but my boss wants the MT virtualized. I have been trying the set up where my virtual windows box talks to the Mikrotik via private or internal network on the Hyper-V host. I can get the two machines to talk, but as soon as I set up a bridge on the MT, all traffic ceases between the two. Is it possible to create a bridge for this purpose (having the MT silently in front of my firewalled server)? I could really use some help.

  Read the article

• fstab mount after network initialization

  - by Philip

  I'm automatically mounting a NFS with fstab. Sometimes the mount fails because the hostname of the NFS mount cannot be resolved (getaddrinfo failed). I'm assuming that this happens because the network initialization is slower than the mounts. Is there any way to initialize the network before mounting any devices? I'm already using _netdev as a mount option but this does not help. This is my current fstab file: # <file system> <mount point> <type> <options> <dump> <pass> /dev/md2 / ext3 errors=remount-ro 0 1 /dev/md1 /boot ext3 errors=remount-ro 0 1 /dev/sda3 swap swap defaults 0 0 /dev/sdb3 swap swap defaults 0 0 connect.mygluster.net:/data /var/gluster/data glusterfs ro,_netdev 0

  Read the article

• How to use symbolic links in windows server 2008R2 across the network (mklink)

  - by server info

  I have One Server (Srv1) which holds data with file shares and the storage is full. Now I have second Server (Srv2) which has alot more space. No I would like to transfer all the data von Serv1 to Serv2 and have links to the new destination. I found mklink very useful here but unfortunately it does not work over the network. Which also points the docu out. People heavily rely on the path's so it would be helpful if somone has a pointer for me... how to handle symbolic links a cross the network with Windows Servers. I am running Windows Server 2008. Thanks for any help

  Read the article

• How can I use mobile network account at server so home sync works

  - by Mike Gallagher

  I would like to be able to use a mobile network account while sitting at my server. I had os x server 10.6 running on a mac mini server but recently got a new quad core iMac and want to take advantage of the extra power. My problem - I can sit at the server and log into the mobile network account but can not get it to sync back. When I attempt to sync it get error message that the afp share point is unavailable and that the files are hosted locally. My goal is to be able to use the new iMac as the server and set a user account so that it remains synced so when the account is accessed from other clients, particularly my macbook pro. Is mobile account the best route? Would an external account be a better option. Any advice or ideas of where to read up on this would be much appreciated.

  Read the article

• Laptop is super slow on network

  - by Gary

  So on our network we have a bunch of wireless macs and window Operating laptops, we have a network setup with 802.11g,b,n. All the laptops seem fine except one which is only getting speeds of 54Mb. I have changed the encryption from AES to TKIP and reset the connection, i have updated the drivers, tried plugging it into the LAN and still same slow speed. Apparently the laptop with the slow speed is fine on other networks. I don't know what to do, can anyone help me?

  Read the article

• How to analyze a wifi network with many devices

  - by Caveatrob

  My friend has a wifi network with an x-box, a wii, a playstation, and two nintendo portables. She's also got 2-3 PC's and a network printer. She's got a wifi repeater as well. She claims that she didn't have any issues for months with everything working together, and suddenly everything stopped disconnecting. I haven't been over there yet - wanted to figure out the best way to diagnose the thing. I asked her to send me the stats on the booster and the modem, etc: The booster is Netgear serial #2ac2195506b95 The modem is Cisco Linksys e1500 #10910c12129103 We have a sprint router thru centurylink and they said it is working fine 660 series

  Read the article

• Allowing access to MPD from local network

  - by August Karlstrom

  I have successfully installed MPD (Music Player Daemon) on my desktop computer. Everything works fine when the client runs on the same machine as the server. Now I would like to access MPD from my laptop computer which is connected (wirelessly) to the local network. In order to allow access to MPD from any computer on the local network I have added this line to /etc/hosts.allow: mpd: .local and restarted MPD. Still I get the message "error: Connection refused" when I try to access MPD with MPC (Music Player Client) from my laptop. Any clues or troubleshooting hints?

  Read the article

• Joining a network with a Virtual Windows Server 2008 R2

  - by Triztian

  Hi all, here's my case, I have set up a share in a virtual windows server 2008 R2, the server is hosted by GoDaddy my question is, how do I access the server's public folders, I need to open a file locally (on the client) and to do that I need the server to show up in my Network locations, I have the right credentials and have created a special group that has access to the particular folder that I'm sharing the problem is I don't know how to add the server to my network locations. I have tried VPN Connection but it is my understanding that it cannot be done since it is virtual share server. Any help is trully appreciated.

  Read the article

• Accesing internet with Host-Only network VirtualBox

  - by Bibo

  I have two VMs in my VirtualBox. Both are FreeBSD and should communicate between each other. I have created network with DHCP enabled and set like this: Server Address 10.10.10.1 Server Mask 255.255.255.0 Lower Address Bound 10.10.10.100 Upper Address Bound 10.10.10.200 My VMs are pinging each other and getting right ip adress. This is what I must have and can´t change. Now I want to access internet from one VM and I found that I must use two network cards but I don´t know how to set the second one. I am new with VirtualBox and this stuff so if you count with this in you answer I would appreciate that. And I have Windows 8 as host system if it´s matter.

  Read the article

• Slowness on Exchange 2007 Server (network related we think)

  - by Az

  We are seeing some odd behavior out of our exchange 2007 server. I believe it is network related as during the slowness in response from the exchange server. During these times downloading files to server is fraught with connection resets and extreme slow download speeds that are not affecting other servers right on the same subnet with the same gateway and ISP. We have about 50 users at a time using Outlook 2003 from a terminal server not displaying any other signs of slowness, all network slowness is confirmed trying downloads on the exchange server itself. Checked for virus issues, there are none. Checked for hardware issues, none found I am noticing between 200-400 TCPv4 connections established I am seeing around 100k tcpv4(active) connections according to perfmon are these numbers odd? Has anyone run into anything similar? Our server has a gigbabit NIC linked to a gigabit switch using cat6 so I do not believe it is "physical". Thanks!

  Read the article

• VPS hosting for a social network

  - by Jana

  Hi, I've developed a social network and I've been using shared hosting for that since it was launched. With that I wasn't able to send emails in bulk in cases like "newsletters" and "invitations to join my site". Plus most importantly most of the mails I send ended up in user's SPAM list.I'm planning to move into VPS as it may not have limits added. I'm wondering what's the cheapest VPS host available. I'm not pretty much familiar with Linux commands and seeking cPanel to do the work for me. Will the following configuration suit for a "new" social network like mine which has a less load? 1000Mhz Guaranteed 512MB Guaranteed RAM 20GB (RAID) Disk Space 1000GB/month Bandwidth 2 IP(s) & 5 Backups Semi Managed Thanks in advance

  Read the article

• Network with bridge and port forwarding?

  - by rafek

  Hi! Below is my current (and planned) home network configuration. I would like to connect my non-wifi-capable desktop to my home network. The question is: HOW? What device do I need? The primary requiremen is that I need to be able to forward ports to my desktop. How would I achieve this? Is there something like "double port forwarding"? Could anyone please explain this configuration to me? Thank you in advance!

  Read the article

• Two routers on the same network

  - by qroberts

  My ISP has supplied me with a modem/router all in one and it isn't very good. It loses its settings and dies frequently. So I have another router in my apartment (Linksys wrt310n) that is connected to the modem via LAN-LAN port connections. I want to give my Linksys router the DHCP role and also have the ISP modem DMZ everything to the Linksys router. I want to be able to have all computers connected to both routers on the same network as well. I have been able to make it so that the Linksys has a DMZ to it from the ISP modem, but ISP modem LAN port - Linksys WAN port, so they were on different networks. Is there a way to have it so that both of them are on the same network but the Linksys router handles DHCP and port forwarding?

  Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >