Search Results

Search found 9889 results on 396 pages for 'pointer speed'.

Page 94/396 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

  • Link rate between EMC DAE and HBA

    - by Johan Christensson
    I have a EMC DAE (KTN-STL4) drive cage directly connecconnected to a HP Proliant server using a QLogic QLE2560 HBA. I'm using copper cable between the HBA card and the DAE. On the controller card in the DAE there is a label that states "4Gb". I'm guessing that this means 4Gbit/s. But if I set the HBA card to "Auto speed" it negotiate 2Gbit/s, and if I hard set it to 4Gbit/s I end up with no link. Why is this? Isn't the DAE controller card capebel of link speed higher then 2Gbit/s or is it the copper cable that limits the speed, or is it the interface used between the DAE and Qlogic HBA that is the problem? I have been browsing for HSSDC-FC converters and they always seems to på rated at ~2Gbit/s. If this is the limit, why does it say 4Gb on the controller cards in the DAE?

    Read the article

  • KVM slow guest i/o

    - by Akarot
    Host: Debian 6.0 (squeeze) with qemu-kvm and libvirt from squeeze-backports ii qemu-kvm 1.0+dfsg-8~bpo60+1 ii libvirt-bin 0.9.8-2~bpo60+2 Has 3TB sata drives with software raid and lvm. It has a sequential write speed of ~140MB/s measured with dd bs=1M count=512 if=/dev/zero of=test conv=fdatasync Elevator set to cfq Guest Debian 6.0 (squeeze) Uses LVM as storage. Drivers are virtio and cache='none' Sequential write speed is considerably slower with only 25-50MB/s Elevator set to noop I'm kind of running out of ideas for further tweaks but I'm sure that I/O speed should be much faster because many people are reporting almost native performance with lvm.

    Read the article

  • What is the data transfer speeds within the disk, to other devices?

    - by Kumar
    I use Debian 6 on a HP Elitbook 6930 with 2Gigs of RAM. I was copying two AVI files, 1.5 GB in total, and noticed that the data copying was done at the rate of 4MB/sec. When I copy same AVIs to my Western Digital Passport 25G USB plugin drive the data transfer speed is 11+MB/sec. This speed is different if I plugin the drive to different USB ports. Interestingly, at work I also downloaded a 16MB IE8 exe on my virtual xp, run inside Oracle Sun Virtual Box, and it was downloaded AND saved within a second. We have a high speed network at work. :-) Why and how this difference in data speeds is possible?

    Read the article

  • slow network in centos5 VM with centos5 host running KVM

    - by dan
    I setup KVM following the guide here: http://www.cyberciti.biz/faq/centos-rhel-linux-kvm-virtulization-tutorial/ I setup a bridged network and it worked fine except that the transfer speed is 200KB/s instead of the gigabit speed that I get on the host machine by itself. I tried editing the guest network settings to set "model=virtio" http://wiki.libvirt.org/page/Virtio but this just moves ifconfig-eth0 to ifconfig-eth0.bak in the VM and networking doesn't work at all. I tried moving ifconfig-eth0 back and starting up eth0, which works, but now the transfer speed is ~ 60KB/s I have no idea what else to try. Any suggestions would be greatly appreciated.

    Read the article

  • slow network in centos5 VM with centos5 host running KVM

    - by dan
    I setup KVM following the guide here: http://www.cyberciti.biz/faq/centos-rhel-linux-kvm-virtulization-tutorial/ I setup a bridged network and it worked fine except that the transfer speed is 200KB/s instead of the gigabit speed that I get on the host machine by itself. I tried editing the guest network settings to set "model=virtio" http://wiki.libvirt.org/page/Virtio but this just moves ifconfig-eth0 to ifconfig-eth0.bak in the VM and networking doesn't work at all. I tried moving ifconfig-eth0 back and starting up eth0, which works, but now the transfer speed is ~ 60KB/s I have no idea what else to try. Any suggestions would be greatly appreciated.

    Read the article

  • DFS replication initial step problem

    - by vn
    Heya, I just setup DFS on my network and it's working fine, and now I'm trying to setup DFS-R on a test folder, but then at the end of the procedure (all went fine, selected my 2 folders, primary folder, replication topology and such) I get this error message (roughly translated from french) : Unable to define security on the replicated folder. The shared administration folder doesn't exist. I'm also wondering if there's any required security on the folders to replicate so that DFS-R can access it. I was trying to add SYSTEM in the security, but it won't find it/allow me. The folder has many many files and folders on the primary DFS pointer, but none on the 2nd, just created it with quite the same rights. Note that the primary DFS pointer is on a 2008 server and the DFS service and the secondary DFS pointer are on a 2008r2. Any help is very appreciated, thanks.

    Read the article

  • Problems with chip fan and CPU fan

    - by JS Bangs
    I have a five-year-old ASUS motherboard that has been working fine for me for years, until I attempted to power it on yesterday and got a CPU fan speed and chip fan speed warning. Cracking open the case and powering the computer on, I can see the chip fan working, but it appears to be hitting something as it makes a very loud buzzing noise. The CPU fan, meanwhile, starts up when I power on, but slows down and stops after a few seconds! How can I address these problems? Is there any way to fix these sort of fan speed issues without just replacing the fan (which in the case of the chip fan, probably means replacing the whole motherboard)?

    Read the article

  • How do i use a USB wifi device properly?

    - by acidzombie24
    I'll just say a few random things One usb wifi device i notice only worked when it plugged into my usb hub Another one worked but couldnt get full speed. It came with an extention cord and when i had it a few feet away i was able to (usually) get full speed I had a wifi card in a tower in the past and just about all laptops have it built in How do i use a USB wifi adapter properly? The first device didnt come with an extention cord and made no mention of bringing it away from the computer. When someone else tested the device he said he was getting full speed while it was plugged into his tower so i was pretty surpised. How do i use USB wifi devices properly?

    Read the article

  • Performance difference between compiled and binary linux distributions/packages

    - by jozko
    I was searching a lot on the internet and couldn't find an exact answer. There are distros like Gentoo (or FreeBSD) which does not come with binaries but only with source code for packages (ports). The majority of distros uses binary backages (debian, etc.). First question: How much speed increase can I expect from compiled package? How much speed increase can I get from real world packages like apache or mysql? i.e. queries per second? Second question: Does binary package means it does not use any CPU instructions that was introduced after first AMD 64bit CPU? With the 32bit packages does it mean that the package will run on 386 and basically does not use most of the modern CPU instructions? Additional info: - I am not talking about desktop, but server environment. - I dont care about compile time - I have more servers, so speed increase more than 15% is worth for using source code packages - Please no flamewars. Thank you very much

    Read the article

  • HP ProCurve Port Mode Configuration Question Mark 2

    - by SvrGuy
    We have a ProCurve Switch 2810-48G (J9022A). We need to disable auto negotiation on two ports and manually configure them to be full duplex gige ports. From the web GUI, Configuration Tab, Port Configuration sub tab, I am only presented with the option to configure the port as Auto - 1000. I take this to mean, auto negotiate duplex, manually configure the speed to be gige. From the CLI when I try to set 1000-full I get the following error: Value 1000-full is not applicable to port 39 (or whatever port I try) The exact commands I have entered are: config interface 39 speed-duplex 1000-full BTW: speed-duplex auto-1000 works ( I also tried full-1000 and that did not work either) How do I manually configure the port such that it is manually configured to use full duplex, 1000 mbs?

    Read the article

  • Does using a single cable to connect two switches create a bottleneck?

    - by Nick
    I realise this may be a stupid question for some, but it's something I've always wondered about. Let's say we have two gigabit switches and all of the devices on the network are also gigabit. If 10 computers connected to switch A need to transfer large amounts of data to a server on Switch B (at the same time), is the maximum transfer speed of each connection limited by the bandwidth of the connection between the two switches? In other words, would each computer only be able to transfer at a speed of one gigabit divided by the 10 machines trying to use the "bridge" between switches? If so, are there any workarounds so that every device can use it's maximum speed from point to point?

    Read the article

  • Intel turbo boost - in reality

    - by gisek
    I have an Intel i7-3630QM processor in my laptop. Its speed is supposed to be from 2.4 to 3.4 GHz in turbo boost mode. In reality, will it ever run all cores on full speed (3.4GHz mentioned above) at the same time? I heard somewhere that this additional 1GHz is shared between all cores in laptops. If the boost is 1GHz per core it's pretty impressive (over 40% speed up). What does it really look like? How long can a processor run in turbo mode?

    Read the article

  • USB resets with Ubuntu 9.10

    - by Grumbel
    Since the upgrade to Ubuntu 9.10 I have issues with getting USB device resets on my Maxtor OneTouch USB harddrive: Nov 9 20:54:37 localhost kernel: [32459.100021] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 21:54:37 localhost kernel: [36059.100017] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 23:24:37 localhost kernel: [41459.112025] usb 2-2: reset high speed USB device using ehci_hcd and address 4 The device itself continues to work fine, the resets however wake the device out of its sleep state and thus cause it to spin up, which is very annoying. Interestingly, as the log shows, the resets happen at pretty regular intervals (i.e. one hour or half an hour), not randomly. An USB card reader seems to have the same issues, while another USB harddrive from a different manufactor works fine on the same PC. What could be causing this and how could I fix it?

    Read the article

  • fedora13 mouse change -I Beam

    - by tom smith
    hi. sorry to have to ask such a basic question!! i've got fedora 13, trying to figure out how to change the "I Beam" pointer. earlier, i had a "thin" "I Beam" pointer in my gedit/term windows. now, I have a "thicker/shadow" kind of "I Beam" pointer when i move the mouse over the gedit/term windows. obviously, i've made some change, but i can't figure out what I changed, or where this attribute is set. i've checked google/irc, as well as looked through the "system-preferences-appearance" with no luck.. i saw the customize part of the gui, and could resize the "arrow" but nothing for the "I-Beam". this isn't critical, but it is anoying!! any thoughts/pointers would be helpful. thanks

    Read the article

  • fedora13 mouse change -I Beam

    - by tom smith
    hi. sorry to have to ask such a basic question!! i've got fedora 13, trying to figure out how to change the "I Beam" pointer. earlier, i had a "thin" "I Beam" pointer in my gedit/term windows. now, I have a "thicker/shadow" kind of "I Beam" pointer when i move the mouse over the gedit/term windows. obviously, i've made some change, but i can't figure out what I changed, or where this attribute is set. i've checked google/irc, as well as looked through the "system-preferences-appearance" with no luck.. i saw the customize part of the gui, and could resize the "arrow" but nothing for the "I-Beam". this isn't critical, but it is anoying!! any thoughts/pointers would be helpful. thanks

    Read the article

  • Is there an application I can run that will tell me how fast my computer is running?

    - by Robert Hume
    At work I log into a virtual Windows machine. I'm told it runs as fast as a PC, but I'm skeptical. Is there an application I can run on the machine that will tell me how faster the machine is actually running? It would be nice if it ran on Windows and on Mac. Updating with more details -- I was asked "why does it matter" -- here's why: It matters because I'm a programmer and I need as much speed (CPU and memory) as possible to do my work. IMO, the virtual machine is noticeably slower than a basic $800 PC would be, but I need a way a proving it. Websites like Bandwidthtest.com can show me my internet speed, so I'm wondering if there's an app that can test my computer's speed.

    Read the article

  • Multiple CD writer taking long to burn

    - by Mirage
    I have installed 6 DVD writers in Tower case. I am using Alcohol Software to burn multiple CDS. I have seen that about 4 dvd/cd writer finish recording early but some take long time finish and their speed is around 7x. Its not that those are the only writers doing that, some times other writer write slowly. But there are always 1 or 2 writer which takes about 25 min to write the 700Mb cd and some finish in 5 mins Why is that. All writers can write upto 40px speed. Which thing determines the speed

    Read the article

  • External mouse clicks not working during UAC prompt/windows or other elevated privilege programs

    - by user26453
    I have a Logitech Revolution VX, a small portable mouse. I use it on my laptop running Windows 7 64bit Professional. When a UAC prompt comes up, I can use the mouse to move the pointer, however any clicking via the external mouse is disabled. I have to use my trackpad to actually click. This continues on into whatever UAC window comes next, such as a program install. The mouse pointer can move via my external mouse, but no button clicks register except on the trackpad. This also happens if I am to right click a program and select "Run as Administrator". The external mouse will move the pointer, but no button clicks work. I've tried to google for this issue but haven't found anything. To be it seems generally a problem with my external mouse driver not running with elevated privileges itself. Any help would be appreciated.

    Read the article

  • Windows 7 - sharing file - slow seek time?

    - by progtick
    I do not want to copy the files. I simply have video files (.flv) on one computer and I would like another computer user to watch them without copying. Playback is fine, but seek time (as in if you move the cursor to skip some portion of the video) takes forever! I thought wireless speed might be the culprit, so I wired the two computer. Maybe I saw some improvement but still so bad. It's 1 Gbps! (I know real speed will vary, but before I monitor real speed and such, do I have reasonable issue? Or am I bound to have very slow seek time?) What is going on? I must mention some of these files are huge!

    Read the article

  • Is computer's DRAM size not as important once we get a Solid State Drive?

    - by Jian Lin
    I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more. Won't 2GB or 4GB be quite good if a Solid State Hard drive is used? I think the most worried thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with SDD drive, the problem is a lot less of a concerned? Is there a comparison as to, if DRAM speed is n, then SDD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

    Read the article

  • Any opinions on Paragon's NTFS for Mac solution?

    - by AngryHacker
    I am currently using the free NTFS-3G to access my NTFS drive from the Mac. It seems pretty stable (except once in the very beginning, it locked up the Mac and corrupted my NTFS drive, which I then fixed with chkdsk from a PC). However, speed is NOT one of its virtues. I've been looking at buying Paragon NTFS for Mac OS X 7.0. Their product comparison PDF claims nearly double the speed (vs NTFS-3G) in almost every category (read, write, etc...). Can someone tell me whether the product is stable and whether the speed claims are true.

    Read the article

  • Can Windows 7 or Vista's Snipping Tool capture a screen 10 seconds later, and capture the mouse poin

    - by Jian Lin
    I wonder if Windows 7 or Vista's Snipping Tool can capture a screen 10 seconds later, and capture the mouse pointer as well? The thing is that sometimes we need to capture the thing that "pops up" when the mouse is over it, so in that case, Snippling tool won't seem to work (because the mouse pointer is activating the Snipping tool instead of pointing at the thing to get the "pop up" item). In this case, the key PrtScn on the keyboard can capture the screen to the clipboard, except it won't capture the mouse pointer, which is sometimes wanted... Is there a way to do that, and possibly say, "capture the screen 10 seconds later, when I am all ready?" thanks.

    Read the article

  • DFS replication initial step problem

    - by vn.
    I just setup DFS on my network and it's working fine, and now I'm trying to setup DFS-R on a test folder, but then at the end of the procedure (all went fine, selected my 2 folders, primary folder, replication topology and such) I get this error message (roughly translated from french) : Unable to define security on the replicated folder. The shared administration folder doesn't exist. I'm also wondering if there's any required security on the folders to replicate so that DFS-R can access it. I was trying to add SYSTEM in the security, but it won't find it/allow me. The folder has many many files and folders on the primary DFS pointer, but none on the 2nd, just created it with quite the same rights. Note that the primary DFS pointer is on a 2008 server and the DFS service and the secondary DFS pointer are on a 2008r2. Any help is very appreciated, thanks.

    Read the article

  • linux kernel option to set sata disk to udma/133 1.5gbps

    - by John Doe
    hi, i try to speed up boot time of my linux server box which uses removable HDD rack's the current boot time is around 2 min's but if i connect the hdd's directly to the mainboard its about 2 sec's the problem is that ahci's kernel implementation causes a timeout of around 30 seconds for each disk during boot which originates from the hdd-rack after the timeout the kernel prints that the disk is limited with speed to 1.5gbps and udma/133 is used so the question i have is: how can i set this in grub as a boot option so the kernel doesnt have to wait for a timeout and just hardcoded limits the speed of the disks? i read about a few options like pci=nomsi or such, which dont work thats why im asking for limiting precisely the disks during boot thx

    Read the article

  • Is a computer's DRAM size not as important once we get a Solid State Drive?

    - by Jian Lin
    I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more? Won't 2GB or 4GB be quite good if a Solid State Drive is used? I think the most worrying thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with an SSD drive, the problem is a lot less of a concern? Is there a comparison as to, if DRAM speed is n, then SSD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

    Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >