Search Results

Search found 4224 results on 169 pages for 'wireless n'.

Page 94/169 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

  • Multiple Homed Windows 2008 Server / Windows 7 Client

    - by Daniel Scott
    I have a small Windows 2008 network, with some Windows 7 clients. The clients are both laptops with docking stations and I would like them to communicate with the Windows 2008 server (for filesharing) through the wired network whilst they're docked. Internet connectivity for all machines (clients and server) is via a Wireless LAN, so the wireless adapter in the Windows 7 clients stays active while they're docked. When the laptops are un-docked, it would be nice to still be able to contact the windows 2008 server for print sharing (and slower file sharing) - hence the server also being on the wireless LAN. The windows 2008 server is running Active Directory, DHCP and DNS. It controls DHCP leases on the wired network and holds the DNS records for "myserver.mycompany.local", which is what the filesharing clients connect to. Ideally I'd like the DNS records to return the wired IP first so that this is the address that the laptops will attempt initially - but there doesn't seem to be a way to do that? At present the server's IP on the wireless LAN comes out of an nslookup above the wired Lan IP. The multi-homing works perfectly - but in the wrong order! Switch on the wireless lan and ping myserver and it goes to the wireless IP. Disable the wireless on the client and do the same ping again and after a couple of seconds it starts pinging the wired address. Does anyone have any suggestions on how to make this work in a predictable order? - or even if it can work. Alternative 1? If it can't work, then would this work: Remove the wireless adapter from the server, put a wireless router/bridge on the wired network (set up to route to/from the wireless LAN's subnet), then configure the clients with two routes to the (now) single IP of the server with metrics favouring direct communication over the wired LAN first? Alternative 2? Should I instead single-home the laptops so all of their connectivity is via the wired-LAN while they're docked? (and route via the windows 2008 server - or a dedicated wireless bridge/router)? My concern here is that I'd like undocking to be seamless - and if the clients are in the middle of downloading something from the internet I wouldn't want whatever they're doing interupted as they switch IP addresses onto the Wireless network. Perhaps this isn't the case and I'm concerned over nothing? Any thoughts? :) UPDATE I seem to have cracked it (at least DNS entries come out in the order I hope for - and pinging the server with various combinations of wired, wireless and both interfaces enabled uses the IP I want) ... I set the binding order of the NICs on the Server (which is acting as Domain Controller, DHCP and DNS server) so that the Wired NIC is before the Wireless adapter. (Start -- type "Network Interfaces" -- Select "View Network Connections" -- Press Alt to show classic dropdown menus -- Advanced -- Advanced Settings) Now, an nslookup (from the client) of the server's hostname returns the Wired IP first, followed by the Wireless IP. The wired IP now seems to be used whenever it's contactable. Incidentally, the metrics on the wired and wireless routes (on the client) also favour the wired LAN (based on Windows' automatically assigned metrics) - but this was always the case, even when I was having trouble getting the wired IP to be "favoured". I'm not entirely sure if this is coincidence - or if a DNS server running on Windows, handing back IP addresses for itself does actually take the binding order of it's own network interfaces into account? It would be interesting to hear from someone who can confirm or deny that (or confirm that the binding order on the server plays a role for some other reason?)

    Read the article

  • VLAN across a router to give wireless access to remote sites?

    - by Don
    I've been looking online for this answer, but getting conflicting information. I was under the impression that you couldn't use a VLAN across a router, but maybe it's possible (according to some documentation I see online)? I was hoping someone could clear it up for me. Here's what I'm working with: We have a remote site with a handful of users. We recently gave them an access point (Cisco 1142n) for internal wireless. It's plugged into a switch and working fine (getting IPs from the same DHCP scope as the wired users are getting). Private wireless is set on VL50. At the home office we have private wireless for our internal network working and on VL50, with a test VLAN setup for VL60, which points to our DSL line for the time being. Both private and public wireless works fine internally (not crossing a router). VL50 is named the same at both sites for consistency in naming. If we wanted to give the remote site access to the public wireless (VL60), would that be possible across the routers? For more information, currently the site is connected to the home office via a T1 connection, Cisco routers on both ends. I didn't think it was possible due to the nature of VLANS being layer 2. But, I am from from an expert on this and would appreciate any instruction as to the actual truth of the matter. The end result I'm going for is, how to get our remote sites access to a public (outside) connection along with their private connection, without actually having a DSL (or similar type line) dropped at their location? Thanks in advance for your thoughts.

    Read the article

  • Trouble Extending Network with Apple Airport Extreme (PC won't connect with Ethernet)

    - by 0x783czar
    So I have an Apple Airport Extreme base station that I use to create a wifi network at my house. But on a separate story from this station i have a PC (running Windows 7) that does not have a wireless card. Luckily, I have another Airport Extreme Base Station, so I figured I'd have my second station "extend" the existing network. I asked Apple if this was possible, which it was, and walked through the setup wizard to extend the network. Then I ran an ethernet cable from the Station to my PC. However the PC refuses to connect to the Internet. It says it can access the network, "Unidentified Network (Limited Connectivity)", but that's it. It tells me that my computer does not have an IP address. I tried running the cable to another computer (my Apple MacBook Pro) and got a similar error. Any thoughts?

    Read the article

  • Ad-Hoc mode and Cell (how does it work)?

    - by Ori Cohen
    hello, I am setting up a wireless Ad-Hoc network manually in linux using iwconfig and ifconfig. I have gotten everything working, and I think I understand it all except access point. The part that confused me is this: If I have essid='some_id', channel=11, Mode=Ad-Hoc and appropriate routing/ip on both laptops, why do I need to make sure the Cell is the same? I was under the impression that Ad-Hoc worked independently of the access point. I can easily get around this, I just use iwconfig wlan0 ap 00:00:00:00:00:01 Why is this necessary? I've been unable to find a good tutorial on this. If anyone can clear this up I'd appreciate it. Thanks

    Read the article

  • No drop packets using the error models for wirelesss scenario ?

    I am trying to use the error model in ns2 with wireless links, I am using ns2.33. I tried the uniform error model and the markov chain model. No errors from ns but when I am trying to find the dropped packets due to corruption I can not find any of them using either the uniform or markov models. So please help me if I made any error in using the error model. to search for dropped packets I am using eid@eid-laptop:~/code/ns2/noisy$ cat mixed.tr | grep d My code is available here : http://pastebin.com/f68749435

    Read the article

  • Coffeeshop limits Internet connection to 30 minutes -- how does it recognize me if I delete my cooki

    - by Andrew
    I was connected to the Internet in a coffeeshop earlier today, but I was only allowed 30 minutes of access. I tried deleting my cookies after my time was up (though admittedly I didn't delete my Flash cookies -- would that have solved the problem?), but the connection still recognized that I'd already used 30 minutes, so I couldn't connect again. How did the connection recognize me still? The wireless was unprotected (no code or password), it just had a portal you had to pass through upon the initial connection. I'm not terribly familiar with web development or computer networks, so just trying to get a better idea of what's happening (and possibly to know what to do next time I use up my minutes =)).

    Read the article

  • Depmod - unresolved symbols in rt73 module

    - by Xolstice
    I'm trying to install a linux driver for my wireless network card (D-Link DWL-G510) on my Red Hat Linux 7.1 machine with a 2.4.37.9 kernel. I downloaded the serial monkey driver from the sourceforge site and was able to successfully compile the module. However, whenever I do a "make install", the make script executes a "depmod -a" command which then complains with the message: "Unresolved symbols in /lib/modules/2.4.37.9/extra/rt73.o". I then executed a "depmod -e" command to show unresolved symbols and it indicates the following information: request_firmware_Rsmp_38ce5074 release_firmware_Rsmp_33934162 I did a grep on the above information and it showed no source files making reference to it. I searched for it on google and it returned no results. Can anyone help?

    Read the article

  • encryption problem for wlan profile

    - by Jassi
    i am trying to encrypt keyMaterial element from wireless profile. so I want to convert byte array into OLECHAR but it is giving me wrong output not key sea the below code you may know the solution... DATA_BLOB in; DATA_BLOB out; BYTE pin=(BYTE)"FIPL2"; DWORD din=strlen((char*)pin)+1; in.pbData = pin; in.cbData = din; if(CryptProtectData(&in,L"what is it",NULL,NULL,NULL,0,&out)) { BYTE *b=out.pbData; USES_CONVERSION; bstr=SysAllocString(W2BSTR((const WCHAR *)b)); HRCALL(peSubS222->put_text(bstr), ""); SysFreeString(bstr); bstr=NULL; } else { cout<<"NOOOOOOOOOOOOOOOO :("; } what is missing please help me out

    Read the article

  • Processing incorrect mac addresses from 802.11 frames with pcap

    - by Quentin Swain
    I'm working throurgh a project with pcap and wireless. Following an example posted in response to oe of my earlier questions I am trying to extract the mac addresses from wireless frames. I have created structures for the radiotap header and a basic management frame. For some reason when it comes to trying to output the mac addresses I am printing out the wrong data. When I compare to wireshark I don't see why the radio tap data is printing out correctly but the mac addresses are not. I don't see any additional padding in the hex dump that wireshark displays when i look at the packets and compare the packets that I have captured. I am somewhat famialar with c but not an expert so maybe I am not using the pointers and structures properly could someone help show me what I am doing wrong? Thanks, Quentin // main.c // MacSniffer // #include <pcap.h> #include <string.h> #include <stdlib.h> #define MAXBYTES2CAPTURE 65535 #ifdef WORDS_BIGENDIAN typedef struct frame_control { unsigned int subtype:4; /*frame subtype field*/ unsigned int protoVer:2; /*frame type field*/ unsigned int version:2; /*protocol version*/ unsigned int order:1; unsigned int protected:1; unsigned int moreDate:1; unsigned int power_management:1; unsigned int retry:1; unsigned int moreFrag:1; unsigned int fromDS:1; unsigned int toDS:1; }frame_control; struct ieee80211_radiotap_header{ u_int8_t it_version; u_int8_t it_pad; u_int16_t it_len; u_int32_t it_present; u_int64_t MAC_timestamp; u_int8_t flags; u_int8_t dataRate; u_int16_t channelfrequency; u_int16_t channFreq_pad; u_int16_t channelType; u_int16_t channType_pad; u_int8_t ssiSignal; u_int8_t ssiNoise; u_int8_t antenna; }; #else typedef struct frame_control { unsigned int protoVer:2; /* protocol version*/ unsigned int type:2; /*frame type field (Management,Control,Data)*/ unsigned int subtype:4; /* frame subtype*/ unsigned int toDS:1; /* frame coming from Distribution system */ unsigned int fromDS:1; /*frame coming from Distribution system */ unsigned int moreFrag:1; /* More fragments?*/ unsigned int retry:1; /*was this frame retransmitted*/ unsigned int powMgt:1; /*Power Management*/ unsigned int moreDate:1; /*More Date*/ unsigned int protectedData:1; /*Protected Data*/ unsigned int order:1; /*Order*/ }frame_control; struct ieee80211_radiotap_header{ u_int8_t it_version; u_int8_t it_pad; u_int16_t it_len; u_int32_t it_present; u_int64_t MAC_timestamp; u_int8_t flags; u_int8_t dataRate; u_int16_t channelfrequency; u_int16_t channelType; int ssiSignal:8; int ssiNoise:8; }; #endif struct wi_frame { u_int16_t fc; u_int16_t wi_duration; u_int8_t wi_add1[6]; u_int8_t wi_add2[6]; u_int8_t wi_add3[6]; u_int16_t wi_sequenceControl; // u_int8_t wi_add4[6]; //unsigned int qosControl:2; //unsigned int frameBody[23124]; }; void processPacket(u_char *arg, const struct pcap_pkthdr* pkthdr, const u_char* packet) { int i= 0, *counter = (int *) arg; struct ieee80211_radiotap_header *rh =(struct ieee80211_radiotap_header *)packet; struct wi_frame *fr= (struct wi_frame *)(packet + rh->it_len); u_char *ptr; //printf("Frame Type: %d",fr->wi_fC->type); printf("Packet count: %d\n", ++(*counter)); printf("Received Packet Size: %d\n", pkthdr->len); if(rh->it_version != NULL) { printf("Radiotap Version: %d\n",rh->it_version); } if(rh->it_pad!=NULL) { printf("Radiotap Pad: %d\n",rh->it_pad); } if(rh->it_len != NULL) { printf("Radiotap Length: %d\n",rh->it_len); } if(rh->it_present != NULL) { printf("Radiotap Present: %c\n",rh->it_present); } if(rh->MAC_timestamp != NULL) { printf("Radiotap Timestamp: %u\n",rh->MAC_timestamp); } if(rh->dataRate != NULL) { printf("Radiotap Data Rate: %u\n",rh->dataRate); } if(rh->channelfrequency != NULL) { printf("Radiotap Channel Freq: %u\n",rh->channelfrequency); } if(rh->channelType != NULL) { printf("Radiotap Channel Type: %06x\n",rh->channelType); } if(rh->ssiSignal != NULL) { printf("Radiotap SSI signal: %d\n",rh->ssiSignal); } if(rh->ssiNoise != NULL) { printf("Radiotap SSI Noise: %d\n",rh->ssiNoise); } ptr = fr->wi_add1; int k= 6; printf("Destination Address:"); do{ printf("%s%X",(k==6)?" ":":",*ptr++); } while(--k>0); printf("\n"); ptr = fr->wi_add2; k=0; printf("Source Address:"); do{ printf("%s%X",(k==6)?" ":":",*ptr++); }while(--k>0); printf("\n"); ptr = fr->wi_add3; k=0; do{ printf("%s%X",(k==6)?" ":":",*ptr++); } while(--k>0); printf("\n"); /* for(int j = 0; j < 23124;j++) { if(fr->frameBody[j]!= NULL) { printf("%x",fr->frameBody[j]); } } */ for (i = 0;i<pkthdr->len;i++) { if(isprint(packet[i +rh->it_len])) { printf("%c",packet[i + rh->it_len]); } else{printf(".");} //print newline after each section of the packet if((i%16 ==0 && i!=0) ||(i==pkthdr->len-1)) { printf("\n"); } } return; } int main(int argc, char** argv) { int count = 0; pcap_t* descr = NULL; char errbuf[PCAP_ERRBUF_SIZE], *device = NULL; struct bpf_program fp; char filter[]="wlan broadcast"; const u_char* packet; memset(errbuf,0,PCAP_ERRBUF_SIZE); device = argv[1]; if(device == NULL) { fprintf(stdout,"Supply a device name "); } descr = pcap_create(device,errbuf); pcap_set_rfmon(descr,1); pcap_set_promisc(descr,1); pcap_set_snaplen(descr,30); pcap_set_timeout(descr,10000); pcap_activate(descr); int dl =pcap_datalink(descr); printf("The Data Link type is %s",pcap_datalink_val_to_name(dl)); //pcap_dispatch(descr,MAXBYTES2CAPTURE,1,512,errbuf); //Open device in promiscuous mode //descr = pcap_open_live(device,MAXBYTES2CAPTURE,1,512,errbuf); /* if(pcap_compile(descr,&fp,filter,0,PCAP_NETMASK_UNKNOWN)==-1) { fprintf(stderr,"Error compiling filter\n"); exit(1); } if(pcap_setfilter(descr,&fp)==-1) { fprintf(stderr,"Error setting filter\n"); exit(1); } */ pcap_loop(descr,0, processPacket, (u_char *) &count); return 0; }

    Read the article

  • Turn your laptop into a wireless Access Point with Windows 7!

    - by David Nudelman
    Windows 7 offers a very cool feature where you can connect multiple devices to any wired and wireless network connection (hotel, cable, 3G, UMTS, EDGE, WIFI, RJ45, Ethernet, etc.) by turning your own laptop into a wireless AP (Access Point) to relay those devices not directly connected to the internet. For this just enter these two commands to an elevated (right click on CMD.EXE, run as administrator): netsh wlan set hostednetwork mode=allow ssid=YOURFRIENDLYSSID key=SOMEPASSWORD netsh wlan start hostednetwork At this point, if Internet Connection Sharing (ICS) is setup, anyone can connect to your SoftAP (if they know the PWD of course) and the traffic will be sent through whatever adapter you want. You can actually bridge it across an entirely different adapter... or the same on a different Wifi LAN. A GUI to set this up can be downloaded for free here: http://www.connectify.me/

    Read the article

  • How to set up an ethernet and wireless network using /etc/network/interfaces?

    - by den-javamaniac
    Hi. Currently I have ethernet and wireless networks configured through a network manager (further NM) but it seems to be a bit buggy (I need a different MAC for ether which is never applied if using NM), so I would like to move all the network configs to interfaces file. I know (or can google for) configuration code, but I'm not sure how NM works and it looks like it overrides interface config. Please advice, how I can handle this issue. NOTE: I also would like to be able to locate and connect to various wireless networks but not sure how to do it.

    Read the article

  • How to get wireless and wired network working again on my Dell Inspiron 1501?

    - by Angelo Daul
    My wireless doesn't work with Ubuntu 12.04.(it worked with 10.04 LTS) I have a Dell Inspiron 1501. I followed the steps posted below:(from a similar tag, but...) sudo apt-get install --reinstall bcmwl-kernel-source broadcom-sta-common broadcom-sta-source echo "blacklist brcmsmac" | sudo tee -a /etc/modprobe.d/blacklist.conf echo "blacklist bcma" | sudo tee -a /etc/modprobe.d/blacklist.conf ....and now i have no Network device on my PC(wired or wireless) I can use wired conection if i start my laptop with a"previsious version of Linux"...2.26.43... I am a beginner in Linux These are my hardware: 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [ 14e4:4311] (rev 01) 08:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [ 14e4:170c] (rev 02)

    Read the article

  • Java Socket Connection is flooding network OR resulting in high ping

    - by user1461100
    i have a little problem with my java socket code. I'm writing an android client application which is sending data to a java multithreaded socket server on my pc through direct(!) wireless connection. It works fine but i want to improve it for mobile applications as it is very power consuming by now. When i remove two special lines in my code, the cpu usage of my mobile device (htc one x) is totally okay but then my connection seems to have high ping rates or something like that... Here is a server code snippet where i receive the clients data: while(true) { try { .... Object obj = in.readObject(); if(obj != null) { Class clazz = obj.getClass(); String className = clazz.getName(); if(className.equals("java.lang.String")) { String cmd = (String)obj; if(cmd.equals("dc")) { System.out.println("Client "+id+" disconnected!"); Server.connectedClients[id-1] = false; break; } if(cmd.substring(0,1).equals("!")) { robot.keyRelease(PlayerEnum.getKey(cmd,id)); } else { robot.keyPress(PlayerEnum.getKey(cmd,id)); } } } } catch .... Heres the client part, where i send my data in a while loop: private void networking() { try { if(client != null) { .... out.writeObject(sendQueue.poll()); .... } } catch .... when i write it this why, i send data everytime the while loop gets executed.. when sendQueue is empty, a null "Object" will be send. this results in "high" network traffic and in "high" cpu usage. BUT: all send comments are received nearly immediately. when i change the code to following: while(true) ... if(sendQueue.peek() != null) { out.writeObject(sendQueue.poll()); } ... the cpu usage is totally okay but i'm getting some laggs.. the commands do not arrive fast enough.. as i said, it works fine (besides cpu usage) if i'm sending data(with that null objects) every while execution. but i'm sure that this is very rough coding style because i'm kind of flooding the network. any hints? what am i doing wrong?? Thanks for your Help! Sincerly yours, maaft

    Read the article

  • Basic connectivity issues between Win 7 and XP mixed wired/wireless network.

    - by Pulse
    Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either The Win 7 desktop or the VM's it alwats returns a destination host unreachable. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

    Read the article

  • Bluetooth firmware problem in Ubuntu 13.04

    - by chanzerre
    I have a [Dell Inspiron][1] 15R 5520 laptop. Bluetooth is not working at all. rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no dmesg|grep -i bluetooth gives [ 13.644428] Bluetooth: Core ver 2.16 [ 13.644445] Bluetooth: HCI device and connection manager initialized [ 13.644453] Bluetooth: HCI socket layer initialized [ 13.644455] Bluetooth: L2CAP socket layer initialized [ 13.644461] Bluetooth: SCO socket layer initialized [ 15.861363] Bluetooth: hci0 command 0x1003 tx timeout [ 15.903443] Bluetooth: can't load firmware, may not work correctly [ 17.332535] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.332538] Bluetooth: BNEP filters: protocol multicast [ 17.332544] Bluetooth: BNEP socket layer initialized [ 17.393768] Bluetooth: RFCOMM TTY layer initialized [ 17.393781] Bluetooth: RFCOMM socket layer initialized [ 17.393783] Bluetooth: RFCOMM ver 1.11 hciconfig gives hci0: Type: BR/EDR Bus: USB BD Address: E0:06:E6:D5:DB:46 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN ISCAN RX bytes:687 acl:0 sco:0 events:56 errors:0 TX bytes:2024 acl:0 sco:0 commands:52 errors:0 I have visited the site http://wireless.kernel.org/en/users/Drivers/b43 and according to it lspci -vnn -d 14e4: gives 08:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at c1500000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: wl So I got my PCI-ID as 14e4:4365 which it says is not supported. The alternative is wl. What should I do? My Wi-Fi is working normally without any problems, but Bluetooth is not working. sudo dpkg -i wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb gives following error (Reading database ... 208543 files and directories currently installed.) Unpacking wireless-bcm43142-dkms (from wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb) ... Setting up wireless-bcm43142-dkms (6.20.55.19-1) ... Loading new wireless-bcm43142-6.20.55.19 DKMS files... Building only for 3.8.0-23-generic Building initial module for 3.8.0-23-generic Traceback (most recent call last): File "/usr/share/apport/package-hooks/dkms_packages.py", line 22, in <module> import apport ImportError: No module named apport Error! Bad return status for module build on kernel: 3.8.0-23-generic (x86_64) Consult /var/lib/dkms/wireless-bcm43142/6.20.55.19/build/make.log for more information.

    Read the article

  • Ericsson f3507g WWAN (3G Broadband) and AT commands

    - by JD
    I have a lenovo x200t tablet with WWAN built into it. I'm trying to connect to the internet using AT commands and a C# program which I am making so that the program can connect to the net and upload information on demand. I don't want to use Lenovo's "Access Connections" as it is too complicated for the end user. So far I have been able to use terminal to turn the card on and off, ring landlines and send SMS messages. However I can't seem to access the internet using it. I could access the net through it before I removed "Access Connections" software/bloatware. The commands I am using to try and access the net are: Connect on COM7 to the modem Send initialisation string "AT+CFUN=1" Send AT*ENAP=1,1 as suggested here (http://www.thinkwiki.org/wiki/Ericsson%5FF3507g%5FMobile%5FBroadband%5FModule) Windows says it is "Identifying" the network and a yellow exclamation mark appears on the networking icon in the task bar, but the connection fails and drops off. An IP is assigned to the "Local Area Connection 2" of 169.254.1.192 with a subnet of 255.255.0.0 - no gateway or DNS. Definately no net connection... Anyone got any ideas?

    Read the article

  • decoding 802.11 b

    - by stan
    I have a raw grabbed data from spectrometer that was working on wifi (802.11b) channel 6. (two laptops in ad-hoc ping each other). I would like to decode this data in matlab. I see them as complex vector with 4.6 mln of complex samples. I see their spectrum quite nice. I am looking document a bit less complicated as IEEE 802.11 standard (which I have). I can share measurement data to other people.

    Read the article

  • Vehicle 2 Vehicle Communication Questions

    - by pinnacler
    I have a rare opportunity to meet the man in charge of implementing vehicle 2 vehicle communication for the US Department of Transportation with 2 others in a few hours. Do YOU have any questions for him? I know this is a little outside the normal, but this is a 'reverse' thread and I felt he has some great knowledge on the subject that I want to share with this community. I'll post his answers later today to his questions. Ask about V2V implementation, privacy issues, use cases, or if you've thought of a great way to use V2V and want me to share it with him, he can at least think about it. He is in charge of panel that creates the standard. Or anything else...

    Read the article

  • network windows programming problem

    - by Jayjitraj
    I want to write program which will connect to a network for some amount of time in seconds. Then it disconnects from it and it should be that much faster than the other application (?) should not feel it is disconnected. Which layer should I program at? I know how to disconnect and connect to the network so any suggestion will be helpful...... thanks in advance....

    Read the article

  • Verizon SongID - How is it programmed?

    - by CheeseConQueso
    For anyone not familiar with Verizon's SongID program, it is a free application downloadable through Verizon's VCast network. It listens to a song for 10 seconds at any point during the song and then sends this data to some all-knowing algorithmic beast that chews it up and sends you back all the ID3 tags (artist, album, song, etc...) The first two parts and last part are straightforward, but what goes on during the processing after the recorded sound is sent? I figure it must take the sound file (what format?), parse it (how? with what?) for some key identifiers (what are these? regular attributes of wave functions? phase/shift/amplitude/etc), and check it against a database. Everything I find online about how this works is something generic like what I typed above. From audiotag.info This service is based on a sophisticated audio recognition algorithm combining advanced audio fingerprinting technology and a large songs' database. When you upload an audio file, it is being analyzed by an audio engine. During the analysis its audio “fingerprint” is extracted and identified by comparing it to the music database. At the completion of this recognition process, information about songs with their matching probabilities are displayed on screen.

    Read the article

  • winwindows programming problem

    - by Jayjitraj
    I want to write programming which will connect to a network for some second then disconnect from it and it should be that much fast that other application should not fill it is disconnected so on which layer should i program i know how to disconnect and connect to the network so any suggestion ...... thanks in advance....

    Read the article

  • Voting software with remote units - architectural questions

    - by David Neale
    I'm looking at designing some software that registers live votes (let's say A,B,C or D). The vote needs to be picked up and processed by a .NET engine. The remote voting units should be as small as possible. What form of data transmission should be used for the voting? The data is obviously very simple but there is a need to make sure each unit can only vote once per question. How would the data be received by the computer running the software?

    Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >