Search Results

Search found 8977 results on 360 pages for 'laptop battery'.

Page 95/360 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

  • Connecting 2 PCs using USB-to-USB (male-male) cable

    - by Amirizzuan
    I found this while Googling around: http://www.hardwaresecrets.com/article/Connecting-Two-PCs-Using-a-USB-USB-Cable/248 But then, the solution given in the article is using Windows. Is there any Ubuntu equivalent to this? I would really love to SSH into my Ubuntu server via my Ubuntu laptop, just by connecting one end of the male USB to my laptop, and another end of the male USB to my server. I know I can always SSH into my server via the network, but then in this case of mine, there are cases the server is inside a secluded-secured network server room, and the only way for me to check things out is to go into the server room and open the keyboard console and monitor there. But, if I can just bring my laptop inside and connect to the USB there, then that would be cool. Any idea guys?

    Read the article

  • Kworker consuming %100 CPU

    - by yusuf
    I have a process, named kworker which is continuously consuming 100% of the CPU's computing capacity. I have tried several possible solutions over a period of 3 months, but to no avail. I even got to upgrade to u + 1 (Ubuntu 12.10 Quantal Quetzal), but my effort was, again, fruitless. I desperately need some help, because, as is, this process is draining my computer's battery so fast, that makes linux usage a disappointing experience. It is noteworthy, that I do not have any such issues when I use windows, which results in twice as much battery life.

    Read the article

  • Is it possible to shrink the size of an HP Smart Array logical drive?

    - by ewwhite
    I know extension is quite possible using the hpacucli utility, but is there an easy way to reduce the size of an existing logical drive (not array)? The controller is a P410i in a ProLiant DL360 G6 server. I'd like to reduce logicaldrive 1 from 72GB to 40GB. => ctrl all show config detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: 5001438006FD9A50 Cache Serial Number: PAAVP9VYFB8Y RAID 6 (ADG) Status: Disabled Controller Status: OK Chassis Slot: Hardware Revision: Rev C Firmware Version: 3.66 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 3 secs Surface Scan Mode: Idle Queue Depth: Automatic Monitor and Performance Delay: 60 min Elevator Sort: Enabled Degraded Performance Optimization: Disabled Inconsistency Repair Policy: Disabled Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 15 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Enabled Total Cache Size: 512 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 412476 MB Status: OK Logical Drive: 1 Size: 72.0 GB Fault Tolerance: RAID 1+0 Heads: 255 Sectors Per Track: 32 Cylinders: 18504 Strip Size: 256 KB Status: OK Array Accelerator: Enabled Unique Identifier: 600508B1001C132E4BBDFAA6DAD13DA3 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 196 MB, / 12.0 GB, /usr 8.0 GB, /var 4.0 GB, /tmp 2.0 GB OS Status: LOCKED Logical Drive Label: AE438D6A5001438006FD9A50BE0A Mirror Group 0: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 146 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 146 GB, OK) SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250 Device Number: 250 Firmware Version: RevC WWID: 5001438006FD9A5F Vendor ID: PMCSIERA Model: SRC 8x6G

    Read the article

  • Acer Aspire One (mini) mfgd 9/03 locks up also when plugged in

    - by LAURIE ANN
    My problem is almost the same as the Toshiba user (Toshiba A205-5804 freezes when plugged in): Well I have a Toshiba A205-5804 and the problem is that the screen freezes anytime I plug the pc into the external power supply, not as most of the computers having the same issue, my computer DOES freeze in safe mode, and I really can't bear this problem for much longer... It's not an overheat problem, the computer is not getting hot or anything related, I've tried already to change the AC adapter, to boot only with AC and no battery, and also all of these suggestions: The only difference in my case is: I can be using the battery and when it runs down, I can just close the lid and the system goes into hibernation mode. I then plug it in and let it charge. When I think it's finally charged, I can UNPLUG it, open the lid and all is running fine on the battery again. Note: the system was NOT shut down and it still runs as long as I remove the power plug before opening the lid. I have ALL the same issues as the other Toshiba user, also. I was a tech for 9 yrs in my own business and this one has not only stumped me, but anyone I have asked has never heard of this problem. Every repair center wants to charge me for diagnosis, even is they cannot fix it. I would really like to run this system along side of my new Acer Aspire 17" laptop as I need it to finish my grad school work. Any ideas would be GREATLY appreciated. Thanx, Laurie Ann

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • HP DL185 - very slow disk read speed

    - by fistameeny
    Hi, I have a HP DL185 G6 Server (12 disk model) with the following spec: Quad Core Xeon 2.27GHz 6GB RAM HP P212 RAID controller with battery backup 2 x 128GB 15K SAS 3.5" (RAID-1 for the operating system) 4 x 750GB 7.5K SAS 3.5" (RAID-5 for the data, 2TB usable space) The operating system is Ubuntu Server 9.10. Both drives have been formatted as EXT4. We are finding that read speed of the RAID-5 array is poor. Disk test results below: sudo hdparm -tT /dev/cciss/c0d1p1 /dev/cciss/c0d1p1: Timing cached reads: 15284 MB in 2.00 seconds = 7650.18 MB/sec Timing buffered disk reads: 74 MB in 3.02 seconds = 24.53 MB/sec For info, the RAID-1 array performs as follows: sudo hdparm -tT /dev/cciss/c0d0p1 /dev/cciss/c0d0p1: Timing cached reads: 15652 MB in 2.00 seconds = 7834.26 MB/sec Timing buffered disk reads: 492 MB in 3.01 seconds = 163.46 MB/sec We thought this was because with no battery, read/write cache is disabled. We have bought and installed the battery backup and have used the HP bootable CD to change the cache settings to 50% read / 50% write and check cache is enabled on the drives and the controller. Is there something I'm missing?

    Read the article

  • Linux Mint Constantly freezing on Dell XPS L502X

    - by Josh
    I recently partitioned my hard drive to dual boot the existing Windows 7 with Linux Mint because I am tired of using Windows, especially the lack of terminal. I want to eventually remove Windows 7 and just run it from a VM within Linux Mint, but I want to make sure that I like the Mint before going all in. I ran Linux Mint on a VM inside Windows for a while, enjoyed it, and never had any issues with it. Since installing on my hard drive it has started freezing every 5-10 minutes, and the only way to get it back is to either power down, or close the lid and reopen once it sleeps. I've also tried running Ubuntu on dual boot in the past, and while it never froze, the battery life was terrible, and the fan was constantly running. I'm experiencing the same battery/fan problem with Mint, which doesn't make sense to me, as Linux should be lighter on the CPU than windows. If I had to guess I'd say it's probably a driver thing, with my video card or fan or something. My battery life in Windows is ~2 hours and its about 40 minutes in Linux. At this point, that is even if my laptop doesn't freeze before then. On a less important note, I also have an intel Centrino 6150 WiMax card that I'd like to be able to use, but that won't register on the Linux system either. I have tried downloading drivers for both of these, but neither have solved my problems. I'm definitely getting frustrated and am getting close to giving up on Linux even though I dread working on a Windows machine.

    Read the article

  • Does anyone know where I could find a 2 input USB voltage meter?

    - by John O
    What we really need is a tiny UPS, of sorts. We'll be hooking up a solar cell and a battery to a single board computer. Currently, that SBC is a custom Pic32 device, and it does it's own UPS and voltage monitoring duties. I've been tasked with trying to replicate all of its features with off the shelf products... and for the most part I've succeeded. But I don't currently have any way to switch between two sources of juice, or monitor when they're getting low. These guys have something: http://www.mini-box.com/picoUPS-100-12V-DC-micro-UPS-system-battery-backup-system I really like it, the price is well within the budget. We might even work it in though it does 12V and I'll probably be using 5V... there are enough engineers on hand to figure out something. But I'd still have no idea what the voltage was for the PV or battery. I was hoping that there was some simple little USB multimeter thing that I could use to monitor this with, but I can't seem to come up with anything. I've found all sorts of cool hardware, but nothing that will help us. Does anyone know of anything?

    Read the article

  • How can I tell if my UPS is functioning properly or not for my PC?

    - by prabha
    For the last two days, my Uninterruptable Power Supply (UPS) has failed to produce the actual back up. So, I charged it for 24hrs and again checked that when the power failed my PC was automatically shut down. But in the time of power no supply from ups bt .......is my ups is working properly or not else there is direct power. It will cause any harm to my pc. my questions are..... Is the UPS functioning properly or not? If not, then will it harm my pc? If it is functioning, will it regulate direct power to pc without any cause? Is my UPS battery not working? What should I do to make my UPS batteries last for at least a year? I am using FRONTECH UPS 600va (Warranty for both ups and battery is expired) I already changed the battery 8 months previously. Note from editor: Tried to make as much sense of this question as I could. I hope I didn't alter the meaning in any way.

    Read the article

  • Issues printing through ssh tunnel and port forwarding

    - by simogasp
    I'm having some problems trying to print through a ssh tunnel. I'd like to print from my laptop to a network printer (Toshiba es453, for what matters) which is in a local network. I can reach the local network using a gateway. So far I did the following: ssh -N -L19100:<Printer_IP>:9100 <username>@<ssh_gateway> Basically i just mapped the port 19100 of my laptop directly to the input port of the printer, passing through the gateway. So far, so good. Then, i tried to install on my laptop a new printer with the GUI config tool of ubuntu, so that the new printer is on localhost at port 19100 (as APP Socket/HP Jet Direct) , then I provided the proper driver of the printer. In theory, once the tunnel is open I should be able to print from any program just selecting this printer. Of course, it does not work. :-) The document hangs in the queue with status Processing while in the shell where I set up the tunnel I get these errors on failing opening channels debug1: Local forwarding listening on ::1 port 19100. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 19100. debug1: channel 1: new [port listener] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 3: new [direct-tcpip] channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44434, nchannels 4 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] channel 3: open failed: connect failed: Connection timed out debug1: channel 3: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44443, nchannels 4 channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44493, nchannels 3 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] As a further debugging test I tried the following. From a machine inside the local network I did a telnet <IP_printer> 9100, got access, wrote some random thing, closed the connection and correctly I got a print of what I had written. So the port and the ip of the printer should be correct. I tried the same from my laptop with the tunnel opened, the telnet succeeded but, again, the printer didn't print anything, getting the usual channel x: open failed: errors. I'm not a great expert on the matter, I just thought that in theory it was possible to do something like that, but maybe there is something that I didn't consider or I did wrong. Any clue? Thanks! Simone [update] As further debugging test, I tried to replicate the procedure from a machine in the local network. From that machine, I did ssh -N -L19100:<IP_printer>:9100 <username>@<ssh_gateway> (note that now the machine, the gateway and the printer are in the same local network) then I tried again the telnet test with telnet localhost 19100, I got access and everything, but I didn't get the print but the usual error channel 2: open failed: connect failed: Connection timed out Maybe I am missing some other connection to be forwarded or maybe this is not allowed by the administrators. Of course, if I connect via ssh tunneling to the local machine from my laptop through the gateway, I can successfully print using the lpr command (from the local machine). But this is what I would like to avoid (yes, I'm lazy...:-), I would like to have a more 'elegant' and transparent way to do that.

    Read the article

  • Why is the framerate (fps) capped at 60?

    - by dennmat
    ISSUE I recently moved a project from my laptop to my desktop(machine info below). On my laptop the exact same code displays the fps(and ms/f) correctly. On my desktop it does not. What I mean by this is on the laptop it will display 300 fps(for example) where on my desktop it will show only up to 60. If I add 100 objects to the game on the laptop I'll see my frame rate drop accordingly; the same test on the desktop results in no change and the frames stay at 60. It takes a lot(~300) entities before I'll see a frame drop on the desktop, then it will descend. It seems as though its "theoretical" frames would be 400 or 500 but will never actually get to that and only do 60 until there's too much to handle at 60. This 60 frame cap is coming from no where. I'm not doing any frame limiting myself. It seems like something external is limiting my loop iterations on the desktop, but for the last couple days I've been scratching my head trying to figure out how to debug this. SETUPS Desktop: Visual Studio Express 2012 Windows 7 Ultimate 64-bit Laptop: Visual Studio Express 2010 Windows 7 Ultimate 64-bit The libraries(allegro, box2d) are the same versions on both setups. CODE Main Loop: while(!abort) { frameTime = al_get_time(); if (frameTime - lastTime >= 1.0) { lastFps = fps/(frameTime - lastTime); lastTime = frameTime; avgMspf = cumMspf/fps; cumMspf = 0.0; fps = 0; } /** DRAWING/UPDATE CODE **/ fps++; cumMspf += al_get_time() - frameTime; } Note: There is no blocking code in the loop at any point. Where I'm at My understanding of al_get_time() is that it can return different resolutions depending on the system. However the resolution is never worse than seconds, and the double is represented as [seconds].[finer-resolution] and seeing as I'm only checking for a whole second al_get_time() shouldn't be responsible. My project settings and compiler options are the same. And I promise its the same code on both machines. My googling really didn't help me much, and although technically it's not that big of a deal. I'd really like to figure this out or perhaps have it explained, whichever comes first. Even just an idea of how to go about figuring out possible causes, because I'm out of ideas. Any help at all is greatly appreciated. EDIT: Thanks All. For any others that find this to disable vSync(windows only) in opengl: First get "wglext.h". It's all over the web. Then you can use a tool like GLee or just write your own quick extensions manager like: bool WGLExtensionSupported(const char *extension_name) { PFNWGLGETEXTENSIONSSTRINGEXTPROC _wglGetExtensionsStringEXT = NULL; _wglGetExtensionsStringEXT = (PFNWGLGETEXTENSIONSSTRINGEXTPROC) wglGetProcAddress("wglGetExtensionsStringEXT"); if (strstr(_wglGetExtensionsStringEXT(), extension_name) == NULL) { return false; } return true; } and then create and setup your function pointers: PFNWGLSWAPINTERVALEXTPROC wglSwapIntervalEXT = NULL; PFNWGLGETSWAPINTERVALEXTPROC wglGetSwapIntervalEXT = NULL; if (WGLExtensionSupported("WGL_EXT_swap_control")) { // Extension is supported, init pointers. wglSwapIntervalEXT = (PFNWGLSWAPINTERVALEXTPROC) wglGetProcAddress("wglSwapIntervalEXT"); // this is another function from WGL_EXT_swap_control extension wglGetSwapIntervalEXT = (PFNWGLGETSWAPINTERVALEXTPROC) wglGetProcAddress("wglGetSwapIntervalEXT"); } Then just call wglSwapIntervalEXT(0) to disable vSync and 1 to enable vSync. I found the reason this is windows only is that openGl actually doesn't deal with anything other than rendering it leaves the rest up to the OS and Hardware. Thanks everyone saved me a lot of time!

    Read the article

  • basics of using cut awk grep and sed...

    - by Samantha
    Hello there, I'm trying to extract the year from this output : sam@sam-laptop:~/shell$ date Mon Feb 8 21:57:00 CET 2010 sam@sam-laptop:~/shell$ date | cut -d' ' -f7 2010 sam@sam-laptop:~/shell$ date | awk '{print $6}' 2010 Are there any other ways to get the same result ? using maybe grep, sed etc ? Merci !

    Read the article

  • Problem in using xpath with xslt having distinct values

    - by AB
    I have XML like, <items> <item> <products> <product>laptop</product> <product>charger</product> <product>Cam</product> </products> </item> <item> <products> <product>laptop</product> <product>headphones</product> <product>Photoframe</product> </products> </item> <item> <products> <product>laptop</product> <product>charger</product> <product>Battery</product> </products> </item> </items> and I am using xslt on it //can't change xpath as getting it from somewhere else <xsl:param name="xparameter" select="items/item[products/product='laptop' and products/product='charger']"></xsl:param> <xsl:template match="/"> <xsl:for-each select="$xparameter"> <xsl:for-each select="products/product[not(.=preceding::product)]"> <xsl:sort select="."></xsl:sort> <xsl:value-of select="." ></xsl:value-of>, </xsl:for-each> </xsl:for-each> </xsl:template> I want the output to be laptop charger cam Battery But I m not getting the result as I m expecting...distinct values is working fine ..something is getting wrong when I am adding that and claus

    Read the article

  • How do I write this MySQL query?

    - by CT
    I am working on an Asset DB using a lamp stack. In this example consider the following 5 tables: asset, server, laptop, desktop, software All tables have a primary key of id, which is a unique asset id. Every object has all asset attributes and then depending on type of asset has additional attributes in the corresponding table. If the type is a server, desktop or laptop it also has items in the software table. Here are the table create statements: // connect to mysql server and database "asset_db" mysql_connect("localhost", "asset_db", "asset_db") or die(mysql_error()); mysql_select_db("asset_db") or die(mysql_error()); // create asset table mysql_query("CREATE TABLE asset( id VARCHAR(50) PRIMARY KEY, company VARCHAR(50), location VARCHAR(50), purchase_date VARCHAR(50), purchase_order VARCHAR(50), value VARCHAR(50), type VARCHAR(50), notes VARCHAR(200))") or die(mysql_error()); echo "Asset Table Created.</br />"; // create software table mysql_query("CREATE TABLE software( id VARCHAR(50) PRIMARY KEY, software VARCHAR(50), license VARCHAR(50))") or die(mysql_error()); echo "Software Table Created.</br />"; // create laptop table mysql_query("CREATE TABLE laptop( id VARCHAR(50) PRIMARY KEY, manufacturer VARCHAR(50), model VARCHAR(50), serial_number VARCHAR(50), esc VARCHAR(50), user VARCHAR(50), prev_user VARCHAR(50), warranty VARCHAR(50))") or die(mysql_error()); echo "Laptop Table Created.</br />"; // create desktop table mysql_query("CREATE TABLE desktop( id VARCHAR(50) PRIMARY KEY, manufacturer VARCHAR(50), model VARCHAR(50), serial_number VARCHAR(50), esc VARCHAR(50), user VARCHAR(50), prev_user VARCHAR(50), warranty VARCHAR(50))") or die(mysql_error()); echo "Desktop Table Created.</br />"; // create server table mysql_query("CREATE TABLE server( id VARCHAR(50) PRIMARY KEY, manufacturer VARCHAR(50), model VARCHAR(50), warranty VARCHAR(50))") or die(mysql_error()); echo "Server Table Created.</br />"; ?> How do I query the database so that if I search by id, I receive all related fields to that asset id? Thank you.

    Read the article

  • PVM terminates after Adding Host

    - by Tyug
    On Ubuntu 9.10 using PVM 3.4.5-12 (the PVM package when you use apt-get) The program terminates after adding a host. laptop> pvm pvm> add bowtie-slave add bowtie-slave terminated laptop> Current Configuration only $PVM_RSH = bin/usr/ssh I can ssh perfectly fine into the slave without a password, and run commands on it. Any ideas? Thanks in advance! Here are the sample logs: Laptop log [t80040000] 02/11 10:23:32 laptop (127.0.1.1:xxxxx) LINUX 3.4.5 [t80040000] 02/11 10:23:32 ready Thu Feb 11 10:23:32 2010 [t80040000] 02/11 10:23:32 netoutput() sendto: errno=22 [t80040000] 02/11 10:23:32 em=0x2c24f0 [t80040000] 02/11 10:23:32 [49/à][6e/à][76/à][61/à][6c/à][69/à][64/à][20/à][61/à][72/à] [t80040000] 02/11 10:23:32 netoutput() sendto: Invalid argument [t80040000] 02/11 10:23:32 pvmbailout(0) bowtie-log [t80080000] 02/11 10:23:25 bowtie-slave (xxx.x.x.xxx:xxxxx) LINUX64 3.4.5 [t80080000] 02/11 10:23:25 ready Thu Feb 11 10:23:25 2010 [t80080000] 02/11 10:28:26 work() run = STARTUP, timed out waiting for master [t80080000] 02/11 10:28:26 pvmbailout(0)

    Read the article

  • problem installing rails3.0

    - by Themasterhimself
    Tried the link http://railscasts.com/episodes/200-rails-3-beta-and-rvm gokul@gokul-laptop:~$ ruby -v ruby 1.8.7 (2009-06-12 patchlevel 174) [i486-linux] gokul@gokul-laptop:~$ mkdir -p ~/.rvm/src/ && cd ~/.rvm/src && rm -rf ./rvm/ && git clone git://github.com/wayneeseguin/rvm.git && cd rvm && ./install The program 'git' is currently not installed. You can install it by typing: sudo apt-get install git-core git: command not found gokul@gokul-laptop:~/.rvm/src$ sudo apt-get install git-core [sudo] password for gokul: E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable) E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it? gokul@gokul-laptop:~/.rvm/src$ anyone?

    Read the article

  • QT widget for on WindowsXP

    - by Surjya Narayana Padhi
    Hi Geeks, I need to create a widget which shows battery status(in percentage) inside my qt application. Can anybody suggest me how to get the winXP api to know the battery status. Then as the api will return the percentage I will display on my widget....

    Read the article

  • Ubuntu makes noise and heat when AC charger is inserted

    - by user2263752
    I have an issue with heat and noise on my laptop with Ubuntu 14.04 installed. The thing is that when I have the AC charger plugged into the laptop, it automatically goes to "boost mode" or something. And when the laptop is on battery mode, the heat and noise is reduced shortly. I want the laptop to be on battery mode as general and "boost mode" as an option if more power is needed. Any solutions? I have installed tlp that doesn't seen to have any effect.

    Read the article

  • GIT Clones on Multiple Machines

    - by Adam
    Here's my setup... Laptop (Mac) - git clone of svn repository Thumb drive - git clone of laptop git repository Server (Win Server 08) - git clone of thumb drive repository I'm having trouble keeping them in sync for some reason... If I make a change on the server, I'll do a "git pull " on the thumb drive to get the changes. Take the thumb drive to the laptop and do "git pull " on the laptop. From there, I can do "git svn dcommit" and everything goes up to the SVN repo with no problem. If I pull changes from SVN with "git svn rebase" and then do a pull onto the thumb drive and do a "git status" it says that I'm ## revisions ahead of the master/origin and I can't figure out why.

    Read the article

  • Sync data between a windows desktop app and windows mobile client app

    - by Chris W
    I need to knock up a very quick prototype/proof of concept application to demo to someone within the next couple of days so I've minimal time to research this as fully as I normally would. The set-up is a very simple database application running on a laptop - will only ever be a single user updating a couple of tables so I was thinking of knocking up a basic Win Forms app against SQL Compact. Visual Studio's auto generated data grid edit screens will be fine with a little customisation. The second aspect is to then add a windows mobile client application that can pull data from both tables stored on the laptop, edit some data and insert some extra rows before sending the changes back to the laptop copy of the database. I've not done any WinMo development so what's the best approach for me to look at. Is it easy enough to sync data between the two databases when the WinMo device is connected to the laptop with USB? Most of the samples I've looked at so far seem to be syncing SQL Compact with SQL Standard using IIS which seems a bit overkill. The volumes of data to be synced are so small that I can easily write some manual sync code if it's easy for me to query/update the Compact DB from the laptop application when the device is connected.

    Read the article

  • Problem in using xpath with xslt having distint values

    - by AB
    I have XML like, <items> <item> <products> <product>laptop</product> <product>charger</product> <product>Cam</product> </products> </item> <item> <products> <product>laptop</product> <product>headphones</product> <product>Photoframe</product> </products> </item> <item> <products> <product>laptop</product> <product>charger</product> <product>Battery</product> </products> </item> </items> and I am using xslt on it //can't change xpath as getting it from somewhere else <xsl:param name="xparameter" select="items/item[products/product='laptop' and products/product='charger']"></xsl:param> <xsl:template match="/"> <xsl:for-each select="$xparameter"> <xsl:for-each select="products/product[not(.=preceding::product)]"> <xsl:sort select="."></xsl:sort> <xsl:value-of select="." ></xsl:value-of>, </xsl:for-each> </xsl:for-each> </xsl:template> I want the output to be laptop charger cam Battery But I m not getting the result as I m expecting...distinct values is working fine ..something is getting wrong when I am adding that and claus

    Read the article

  • Unrecognized option: -o Could not create the Java virtual machine.

    - by Kerubu
    I've got an unusual build error when using Buildroot to create an image for my Phidget SBC. It's unusual because it occurs ONLY on my development laptop and NOT on my general use laptop even though I am using EXACTLY the same Builroot environment as published by Phidgets themselves. When I try to create my Buildroot image I get the following error when it attempts to compile GNU classpath: Making all in tools make[2]: Entering directory `/home/xxxx/buildroot_phidgetsbc/buildroot-phidgetsbc_1.0.4.20111028/output/build/classpath-0.98/tools' /bin/mkdir -p classes asm /bin/mkdir -p ../tools/generated/gnu/classpath/tools/gjdoc/expr java -classpath antlr.Tool -o ../tools/generated/gnu/classpath/tools/gjdoc/expr/ \ ./gnu/classpath/tools/gjdoc/expr/java-expression.g Unrecognized option: -o Could not create the Java virtual machine. make[2]: *** [tools.zip] Error 1 The only difference I can possibly thing of is the different Linux (Ubuntu) versions I am using on each laptop. Also I cannot find a -o option documented for Java and don't understand why it works on one laptop but not the other. Any suggestions would be helpful.

    Read the article

  • Can a pc with a 1.2 ghz dual core run VS 2013? [on hold]

    - by moo2
    Edit: This question is about a tool used for programming, Microsoft Visual Studio 2013. I already read the minimum requirements for VS 2013 before I posted or I wouldn't have asked the question. I searched on the web for an answer for a few hours before posting. Why should I go out and spend $400 on a laptop if I can spend less than $100 and use it to learn how to program? In the context of the question it is clear I was not asking for advice on what laptop to buy and it was also clear I was not asking for someone to walk me through the system requirements of VS 2013. This is a vast community and I was wondering if someone in this vast community would have experience in dealing with my question. In other words has anyone ever tried anything like it? If I had an old computer sitting around I would have tested it. At the moment all I have is a friend's Chromebook I'm borrowing. End Edit. I know the requirements for Microsoft Visual Studio 2013 state 1.6 ghz processor. I'm looking at getting a laptop for school and I found one that is old but cheap and would work for college. The Dell D430 I'm looking at getting has a 1.2ghz Core 2 Duo CPU, 80GB HD, 2GB RAM, and Windows 7 Home Premium. It's refurbished. I can get it for less than most phone's cost and from a Microsoft Authorized Refurbisher. I know it's not a skyrim rig but it's lightweight and can handle being a college laptop and doing word processing. Would Visual Studio 2013 run at all? If it is slower I'm not concerned. I just want to know if it would work and compile my assignments and run them? I'd be using this laptop for doing assignments and learning programming languages not for coding the next social media sensation.

    Read the article

  • HP SmartArray P400: How to repair failed logical drive?

    - by TegtmeierDE
    I have a HP Server with SmartArray P400 controller (incl. 256 MB Cache/Battery Backup) with a logicaldrive with replaced failed physicaldrive that does not rebuild. This is how it looked when I detected the error: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, Failed) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) unassigned physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SATA, 750 GB, OK) ~# I thought that I had drive 2I:1:8 configured as a spare for Array A and Array B, but it seems this was not the case :-(. I noticed the problem due to I/O errors on the host, even if only 1 physicaldrive of the RAID5 is failed. Does someone know why this could happen? The logicaldrive should go into "Degraded" mode but still be fully accessible from the host os!? I first tried to add the unassigned drive 2I:1:8 as a spare to logicaldrive 2, but this was not possible: ~# /usr/sbin/hpacucli ctrl slot=0 array B add spares=2I:1:8 Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# Interestingly it is possible to add the unassigned drive to the first array without problems. I thought maybe the controller put the array into "failed" state due to the missing spare and protects failed arrays from modification. So I tried was to reenable the logicaldrive (to add the spare afterwards): ~# /usr/sbin/hpacucli ctrl slot=0 ld 2 modify reenable Warning: Any previously existing data on the logical drive may not be valid or recoverable. Continue? (y/n) y Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# But as you can see, re-enabling the logicaldrive this was not possible. Now I replaced the failed drive by hotswapping it with the unassigned drive. The status now looks like this: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, OK) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) ~# The logical drive is still not accessible. Why is it not rebuilding? What can I do? FYI, this is the configuration of my controller: ~# /usr/sbin/hpacucli ctrl slot=0 show Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: XXXX Cache Serial Number: XXXX RAID 6 (ADG) Status: Enabled Controller Status: OK Chassis Slot: Hardware Revision: Rev E Firmware Version: 5.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Analysis Inconsistency Notification: Disabled Raid1 Write Buffering: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True ~# Thanks for you help in advance.

    Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >