Search Results

Search found 4282 results on 172 pages for 'social networks'.

Page 95/172 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

• Networking Windows 7 and Vista

  - by foosion

  How do you set up a Windows Vista Home Basic desktop (wired) and a Windows 7 Home Premium laptop (wifi) on a home network so that they can share files and the printers connected to the desktop? The Win7 laptop may also be used on other networks. I'm going to have to set this up for my parents when I visit shortly. I currently use XP and am not really familiar with Vista or Win7 network setup. Would it be difficult to share between the Vista and Win7 machines and and XP machine? If not, how to add that?

  Read the article

• Cisco PIX 515 internet connection

  - by Steve

  We have a ASDL modem connected to a Cisco PIX 515 to a switch. We have managed to get the PIX setup with ethernet1 (inside) with our IP range 192.168.5.1-192.168.5.254 and the internal network is working fine. We are having difficulty getting a connection from the PIX through the router on ethernet0 (outside). We have managed to ping external networks by setting up IMCP echo/echo-reply but are unable to setup any other protocols in a similar manner. Can any one help with a few lines that could be typed into the console that will allow this connection?

  Read the article

• Pidgin getting "Connection Refused" whenever I connect to IRC server

  - by tvanover

  On my win 7 x64 machine using pidgin 2.6.3 I cannot connect to any IRC server. I have tried most of the North American servers, as well as my workplace's internal server with no luck. I have tried from work as well as from home but different networks have no effect. I keep getting Unable to Connect: Connection refused. It work fine 3 weeks ago on this very machine running Win 7 x64. But then I re-imaged, and did not backup my .purple folder. Which I had used for the past 2 years and originally created on a vista install. I can connect using this install of Pigin to yahoo and msn with no problems. Just not to irc. Any thoughts?

  Read the article

• Can't play stream from TorrentFlux stream

  - by thegreyspot

  Hi I am trying to stream a video from my TorrentFlux-b4rt server. I tried multiple media players, none work. Only VLC was able to produce an error message: input can't be opened: VLC is unable to open the MRL 'mms://...:8080/'. Check the log for details. I have tried multiple computers on different networks and all have the same issue. I am using Windows 7 to play the videos, and the server is Torrentflux-b4rt 1.0-beta2 with ubuntu 9.10. Thank you.

  Read the article

• DNS Round-robin failover and load balancing

  - by Tom O'Connor

  Having read all of the questions and answers (1 2 3 and so on) on here relating to DNS load balancing, and Round-robin DNS, there's still a number of unanswered questions.. Large companies, and I'm looking at Google, Facebook and Twitter here, do present multiple A records. 1) If DNS loadbalancing/failover is so dodgy, why do large organisations do it? There seems to be very little mention of "DNS Pinning", despite this (PDF) paper about it. 2) Why is DNS Pinning so seldom mentioned? 3) Are there any concrete examples of which ISPs and so on actually do rewrite DNS TTLs? That said, I'm not entirely backing the side for using DNS for failover or any form of load balancing. For most networks, BGP diverse routing still seems to be a better fit. DNS rears it's ugly head again. :(

  Read the article

• UDP multicast streaming of media content over WIFI

  - by sajad

  I am using vlc to stream media content over wireless network in scenario like this (from content streamer to stream receiver client): The bandwidth of wireless network is 54 Mb/s and UDP stream's required bandwidth is only 4 Mb/s; however there is trouble in receiving media stream and quality of playing specifically in multicast mode; means I can play the stream but it has jitter and does not play smoothly. In uni-cast I can stream up to 5 media streams correctly, but in multicast mode there is problem with streaming just one media! However when I stream from client some multicast streams; the wifi access-point can receive data correctly and I can see the video in "udp streamer" side correctly even when number of multicast streams increases to 9; But as you see I want to stream from streaming server and receive media in client size. Is this a typical problem of streaming real-time contents over wireless networks? Is it necessary to change configurations of my WIFI switch or it is just a software trouble? thank you

  Read the article

• Windows 7 Default Gateway problem

  - by Matt

  Hi, I have a strange problem (or at least seems strange to me) the below are IP configurations for two laptops on my home network which consists of a main router 192.168.11.1 and a connected wireless router (i know this can cause problems but has always worked until I got the win7 machine) at 192.168.11.2 with DHCP disabled. Laptop 1 - Win XP IP: Dynamically assigned by main router default gateway: 192.168.11.1 (main router) This machine gets perfect connectivity. Laptop 2 - Win7 IP: dynamically assigned by main router Default Gateway: 192.168.11.2 THIS IS THE PROBLEM... I cannot seem to get this machine to default to the main router for the gateway UNLESS I go to a static configuration which I would rather not do since I regularly go between my home and public networks. Why is my Win7 machine not finding the main gateway the same way that the other laptop is? I believe that the rest of my setup is fine as it has always worked and it works perfectly when set as static ip and gateway. Please help! Thanks

  Read the article

• People Pane in Outlook 2010 doesn't show any emails, or does

  - by Eduardo Molteni

  People Pane in Outlook 2010 either does not show any emails, or only shows some emails for other folders. I've tried re-indexing and recreating the profile, to no avail. I really like the new People Pane in Outlook 2010. Not for the "Social" features, but for finding related emails and attachments. But it just does not work. It is totally broken. Do you know some trick to make it work? Using 32-bit Outlook local version, without Exchange.

  Read the article

• scalability: when to use CDN?

  - by ajsie

  i've read about CDN but dont know exactly what it is for. lets say i've got an international social network (text and image content), and it's growing in traffic from different countries, do i have use of CDN? the picture i got from the sources i've read is that it copy your content and put it in many servers spread out over the world so that users will fetch it from the nearest point. does this mean that every server has a copy of my mysql database and the image files? is this the proper way to make your web service available for the world? cause how else could you set up a servers through out the world, contacting hosting companies for each country?

  Read the article

• How can I set up multiple dynamic users to update a single network's dynamic IP

  - by d3vid

  On my home network we are allocated a dynamic IP. I want to configure ddclient (or an equivalent) to send IP updates to DNS-O-Matic/OpenDNS only when I am on my home network. I do not want to send IP updates when I'm on my office network. Can this be done? I am prepared to use different FLOSS software or a different free DNS service. Additionally, there are multiple users who may be on the home network or away on other networks. How can we configure ddclient on each machine so that whoever is on the home network updates the IP (i.e. so we don't have to rely on a particular machine being on the network to update the IP). OpenDNS support have said we can't simply install updater software on each machine.

  Read the article

• Automatically repair network connection when it goes down.

  - by Spines

  Every hour or so my wireless router goes down, and everyone connected loses internet for a couple minutes. If I right click on my network connection and choose repair, I usually get internet back quicker. Is there a way I can automatically have it try to repair the connection once it goes down? Can I write a program to do this if there isn't a built in windows setting? BTW I'm using Windows XP. EDIT:My router is a Linksys WRT110 with Firmware Version: 1.0.04, and I have cable internet. The signal is 100%. I live in an apartment complex and there are about 15 other wifi networks visible to me, not sure if that has any effect.

  Read the article

• Error "403 Forbidden" on Sharepoint Search Settings Page

  - by user21924

  Hello I thought I had solved this nightmare by re-entering the values in my SSP properties set up, however accessing the Search Settings page error has reared it ugly head again. Now all solutions point to this method listed here * http://www.routtlogics.com/blog/Lists/Posts/Post.aspx?ID=6 * http://social.technet.microsoft.com/Forums/en-US/sharepointadmin/thread/f00651cd-e452-45b9-b19e-90e89c3c3ad4 * http://blogs.technet.com/sushrao/archive/2009/03/26/microsoft-office-sharepoint-server-2007-moss-403-forbidden-error-when-clicked-on-search-settings-page.aspx The above workaround(s) basically states that granting the local group WSS_WPG read and write permission to the Task folder in the Windows directory would solve the problem, however whenever I try to change to the permission attribute of this folder I get an access denied message, even when logged in as a Domain administrator, Enterprise and even the SharePoint Farm administrator. Please guys how do I get around this access denied issue. Thanks

  Read the article

• IE Kerberos failure on some machines with CNAME web server (with SPN for host's A record)

  - by Eric Thames

  It's fairly well known that IE doesn't like to do Kerberos against hosts that are registered in DNS as CNAMEs. What happens is that IE turns around and uses the underlying A record for the host for looking up the Service Principal Name (SPN). On a test network we are able to get Kerberos working by having the SPN registered for the A record of the host, so that Kerberos authentication happens successfully when accessing the web server via it's CNAME in the browser. Kerberos authentication works properly when directly accessing the web server with the A record host in the URL, but for various reasons that are beyond my control, it is desired to use the CNAME. On the production network, this same configuration fails though and I can't figure out why. Any thoughts? This is a java web application using the SPNEGO library - not IIS. Kerberos authentication is working properly in both the test and production networks (and has been confirmed to not fail back to NTLM), but the CNAME access only works in test.

  Read the article

• TP-Link TL-WA701N not working good as wireless extender

  - by djechelon

  I bought the device in subject to extend the range of my WPA2/PSK-protected wifi network powered by a TP-Link TL-WR340G device (AP+router). I configured it as follows: Operation mode: Universal Repeater MAC of AP: scanned my SSID and got it Channel width: 20MHz Security options: the same as the parent AP (WPA2/PSK with AES encryption) After configuration inSSIDer shows me two APs beaconing the same SSID at different SNRs (because I was with my laptop close to the extender). After a few hours my tablet, far from the parent AP, stopped working. I found that the scan reported two networks with the same SSID: one WPA-protected and one free at all. This happened very frequently. Rebooting the extender by unplugging it worked but this doesn't last long. Sometimes the extender stops transmitting at all, sometimes it beacons an open network to which nobody can connect (because there is no DHCP). What's wrong with my configuration?

  Read the article

• port forwarding on windows server 2008 to Hyper-v machines

  - by This is it

  I have a host machine (win server 2008 R2) with several Hyper-V virtual machines. I want to be able to redirect certain ports of host to virtual machines. There is virtual network connection between host and virtual machines (192.168.10.xxx). Host is also attached to external network (10.10.10.123). Virtual machines have several other networks between them. E.g., I want to be able to redirect traffic from 10.10.10.123 12345 to 192.168.10.321 54321 I tried RRAS in windows server but for it to work Default gateway to 10.10.10.123 has to be set in virtual machines. Virtual machines can not be on external network.

  Read the article

• Error when starting Outlook 2007 on Windows 7

  - by Jared

  Every time I start Outlook 2007 SP2 on my Windows 7 box Outlook will look like its loading fine, then I get this error message: cannot start microsoft office outlook. cannot open the outlook window and outlook will close. I was able to get outlook to start by using outlook.exe /resetnavpane in the Start-Search box, a nice tip which I got from this social.microsoft.com page. But it didn't fix the problem since outlook is still complaining when it starts after a reboot. What can I do to get outlook to startup normally?

  Read the article

• SQL Server 2008 Install fails error reading etwcls.mof

  - by YonahW

  I receive the following error when trying to install Sql Server 2008 Standard on a Windows Server 2008 box. Error reading from file D:\x64\setup\sql_engine_core_inst_msi\PFiles\SqlServr\MSSQL.X\MSSQL\Binn\etwcls.mof. Verify that the file exists and that you can access it. When searching the interwebs I only find information about compiling this file but not reading. The file exists in the location requested. I have run the WMIDiag tool and there doesn't seem to be any issues. I am not sure what else I can do to solve this issue and can't seem to find anything on the internet about it. Cross posted at: http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/ae47c277-e822-49c1-89b8-701e23702633

  Read the article

• XAMPP - allow internet connection

  - by user1645034

  I usually do my web dev on a production server, now i need to bring some work at home. I have installed XAMPP on my laptop and it seems to work perfectly fine. Most of my project involves CURL enabled, I need to make my xampp application to access the internet. Perhaps give it some IP address and Gateway. I've seen documentation how to enable CURL on xampp, yet I'm struggling to find how to make XAMPP to have internet access. I'm not asking how to access my XAMPP remotely, I'm simply asking how to give internet connection to xampp application for my CURL and other social network API to work.

  Read the article

• Multiple home routers

  - by netvope

  Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

  Read the article

• Multiple home routers

  - by netvope

  Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

  Read the article

• How to set up a software VPN when moving a server to the cloud

  - by Neal L

  I work in a small company with one office in Dallas and another in Los Angeles. We run a Fedora server at our Dallas location and use a Linksys RV042 at each location to create a VPN connection between the sites. Every time the power or internet goes out in Dallas, our server is inaccessible so the entire company goes down. Because of this, we would like to use a shared server in the cloud (something like Linode) to avoid this problem. As a relative novice to VPN configurations, I would like to know if it is possible to set up a software VPN on the cloud server and connect our local networks in Dallas and LA to that VPN. I've read about openvpn and ssh vpns, but I don't know it is the best option. Could anyone with some experience point me in the right direction on the right combination of software VPN and hardware for this? We're open to new hardware to make this happen. Thanks!

  Read the article

• Juniper Network Connect (VPN) on Windows 7

  - by Virat Kadaru

  My company uses Juniper networks for vpn access. I am unable to get the juniper network connect client to work on windows 7 64-bit. It used to work before but after I formatted my system it gives the following error every time I start the vpn client If I check the logs I see this error The Juniper Network Connect Service service is marked as an interactive service. However, the system is configured to not allow interactive services. This service may not function properly. Thanks in advance.

  Read the article

• Connecting together DIR-615 and DIR-655

  - by ra170

  On my DIR-655 my internal network is: 192.168.0.x On my DIR-615 my internal network is: 192.168.1.x They are both connected to my firewall PIX 501 box The PIX itself is connected to the comcast modem. I briefly looked at the menu options on those router and they look similar, however I'm not sure what's the best way to connect those two together so that I can go between those networks. (printing, file browsing, etc.) I'm not sure if I have to do this somehow on those two router or on the PIX itself, or probably on all of them. If anyone has experience with something like that please let me know..

  Read the article

• Need help creating advanced context menu command in Windows 7 (x64)

  - by Craig

  I found out about ForceBindIP and I really love it, so much that I am using it regularly enough to where spamming the same command prompt over and over again is getting painful. Here's ForceBindIP and what it does: http://www.r1ch.net/stuff/forcebindip/ I'm on a 64-bit of Windows 7 Home Premium. What I want to do is add a right-click context menu item so that when I browse items in Windows Explorer, or on my desktop, I can automate a ForceBindIP command (through the prompt). I am permanently connected to two networks: one over ethernet, and one over wireless. My ethernet network takes priority. What I want to do is add a "Run through wireless network" context menu item, that will send the item through this command: ForceBindIP {5F657824-9E3B-46E5-C21E-F52585R6457E} "[path to right-clicked file here]" It will need to run that command in C:\Windows\SysWOW64. I've no experience at all playing with the Windows registry or writing batch files, anything of that sort. I was wondering if anyone here would be kind enough to assist me?

  Read the article

• Registering OCX on 64-bit Windows 7

  - by Jay

  I want to use MSCOMM control in my MS Excel 2010 VBA. The control shall appear in Tools-> Additional Controls dialog box in VBE of MS Excel 2010. I am trying to register MSCOMM32.OCX on my 64-bit Windows 7 machine. However, as I try to register it using regsvr32 as shown in the command window below, I am getting shown error popup. What am I missing here? Why is this component not getting registered? Or this is not the correct way to include MSCOMM control in MS Excel VBA? I have read following: Registering OCX file manually http://social.msdn.microsoft.com/Forums/en/vbgeneral/thread/1f00d6cc-00a9-4ca0-9698-535e2487af31 But to no avail.

  Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >