Search Results

Search found 9611 results on 385 pages for 'low power'.

Page 97/385 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

  • ClearOS - how to avoid getting stuck at a fsck message at boot?

    - by Scott Szretter
    I have had this happen a couple times - I have a ClearOS Enterprise 5.2 box, and due to a power outage or similar, it ends up showing an error at boot and saying that fsck needs to be run (I think it said with (or without?) the -a parameter). The problem is, I need this box to be headless, at a remote location (miles away)! SO, I need to come up with a solution on how to either have it automatically repair itself, without someone to be present with a monitor and keyboard. Another possibility is to simply avoid the issue all together - maybe there is something that can be changed so it's very unlikely to happen (I am unable to avoid the power outage of course - at least not practically). Finally, maybe it can be boot off a read only media (cd) or file system or similar? At least the base OS, so that it would always at least boot with enough configuration that might allow remote access, or basic connectivity?

    Read the article

  • external HDD with SATA & USB interface? [closed]

    - by GregH
    Anyone know of an external HDD that would have (in addition to USB) a SATA (eSATA) port/cable? i.e. Brand/Model Background - In one location I want to use it is I would like to increase the performance by cabling it directly to the PC SATA port, HOWEVER I don't want to have to open up the PC to do this each time. I was thinking of running a SATA cable out through the PC case so I just plug it directly into the external HDD in question. Perhaps it should be also externally powered too so I don't need to run a power cable out from the PC power supply.

    Read the article

  • how to i lock a Harddrive to a certain drive letter

    - by Memor-X
    i have an external hard drive that i have set to Drive F which on it contains some programs that i have shortcuts on the desktop how i have a second external hard drive which i store my music on which is auto assigned to Drive E, due to someone thinking that Australians love to have f** wings on power plugs for hard drives while power boards have each socket close together i can have both of these hard drives set at the same time my music hard drive i normally only plug up when i sync music to my ipod but on occasion when i unplug my music hard drive and plug my old one back in or at times when i turn on my computer with the music hard drive in, turn off my computer and turn it back on with my old hard drive it's drive letter gets switched to E i get annoyed having to always go into disk management and change the drive letter back to F when this happens so i am wondering if I can lock my hard drive to always be F, if anything else tries to be F it can fail for all i care If there is a batch file i can use that'll go though all the steps of Disk Management to change a drive's letter, that way i can set it up in the startup folder

    Read the article

  • Strategy and AI for the game 'Proximity'

    - by smci
    'Proximity' is a strategy game of territorial domination similar to Othello, Go and Risk. Two players, uses a 10x12 hex grid. Game invented by Brian Cable in 2007. Seems to be a worthy game for discussing a) optimal strategy then b) how to build an AI Strategies are going to be probabilistic or heuristic-based, due to the randomness factor, and the high branching factor (starts out at 120). So it will be kind of hard to compare objectively. A compute time limit of 5s per turn seems reasonable. Game: Flash version here and many copies elsewhere on the web Rules: here Object: to have control of the most armies after all tiles have been placed. Each turn you received a randomly numbered tile (value between 1 and 20 armies) to place on any vacant board space. If this tile is adjacent to any ally tiles, it will strengthen each tile's defenses +1 (up to a max value of 20). If it is adjacent to any enemy tiles, it will take control over them if its number is higher than the number on the enemy tile. Thoughts on strategy: Here are some initial thoughts; setting the computer AI to Expert will probably teach a lot: minimizing your perimeter seems to be a good strategy, to prevent flips and minimize worst-case damage like in Go, leaving holes inside your formation is lethal, only more so with the hex grid because you can lose armies on up to 6 squares in one move low-numbered tiles are a liability, so place them away from your main territory, near the board edges and scattered. You can also use low-numbered tiles to plug holes in your formation, or make small gains along the perimeter which the opponent will not tend to bother attacking. a triangle formation of three pieces is strong since they mutually reinforce, and also reduce the perimeter Each tile can be flipped at most 6 times, i.e. when its neighbor tiles are occupied. Control of a formation can flow back and forth. Sometimes you lose part of a formation and plug any holes to render that part of the board 'dead' and lock in your territory/ prevent further losses. Low-numbered tiles are obvious-but-low-valued liabilities, but high-numbered tiles can be bigger liabilities if they get flipped (which is harder). One lucky play with a 20-army tile can cause a swing of 200 (from +100 to -100 armies). So tile placement will have both offensive and defensive considerations. Comment 1,2,4 seem to resemble a minimax strategy where we minimize the maximum expected possible loss (modified by some probabilistic consideration of the value ß the opponent can get from 1..20 i.e. a structure which can only be flipped by a ß=20 tile is 'nearly impregnable'.) I'm not clear what the implications of comments 3,5,6 are for optimal strategy. Interested in comments from Go, Chess or Othello players. (The sequel ProximityHD for XBox Live, allows 4-player -cooperative or -competitive local multiplayer increases the branching factor since you now have 5 tiles in your hand at any given time, of which you can only play one. Reinforcement of ally tiles is increased to +2 per ally.)

    Read the article

  • Problems with chip fan and CPU fan

    - by JS Bangs
    I have a five-year-old ASUS motherboard that has been working fine for me for years, until I attempted to power it on yesterday and got a CPU fan speed and chip fan speed warning. Cracking open the case and powering the computer on, I can see the chip fan working, but it appears to be hitting something as it makes a very loud buzzing noise. The CPU fan, meanwhile, starts up when I power on, but slows down and stops after a few seconds! How can I address these problems? Is there any way to fix these sort of fan speed issues without just replacing the fan (which in the case of the chip fan, probably means replacing the whole motherboard)?

    Read the article

  • Powerbook G4 unresponsive on wake?

    - by David
    I have a Powerbook G4 17" and I recently updated to the Mac OS 10.5.8 and got a monitor. I put it to sleep by closing the lid and sometimes it resumes normally and sometimes it doesn't. It doesn't matter if it's on sleep for a day or 10 minutes, it just happens randomly. It wakes up, but the screen doesn't flash blue for a few seconds like it normally would, indicating that it found the second monitor. It just wakes up, and a picture appears on both screens and the mouse moves, but nothing responds. The only way I can make it work again is by holding down the power button until it shuts down and then turning it on again. this frustrating because then I have to reopen all my programs and Safari tabs. I tried resetting the PMU by unplugging everything and taking out the batter, then holding the power button for five seconds, but it has the same problem no matter what I do.

    Read the article

  • Windows 7 PC crashes after being locked a few minutes

    - by White Island
    I have a problem with an Optiplex 755 PC running (32-bit) Windows 7 Professional. I just installed the operating system last week, and ever since, it seems to crash when I lock the screen. It doesn't happen immediately; it's usually after I walk away, so a few minutes (but I'm not sure exactly how many). I have this non-specific error in the Event log. I've run a chkdsk, thinking it might be hard drive-related, but that didn't help. Any ideas on what to check and how are appreciated. :) Log Name: System Source: Microsoft-Windows-Kernel-Power Date: 11/17/2010 3:09:28 PM Event ID: 41 Task Category: (63) Level: Critical Keywords: (2) User: SYSTEM Computer: WORKSTATION.domain.local Description: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Event Xml: 41 2 1 63 0 0x8000000000000002 6250 System WORKSTATION.domain.local 0 0x0 0x0 0x0 0x0 false 0

    Read the article

  • Raid0 performance degradation?

    - by davy8
    Not sure if this belongs here or on SuperUser, feel free to move as appropriate. I've noticed the performance on my RAID0 setup seems to have degraded over the past months. The throughput is fine, but I think the random access time has increased or something. In use I generally see about 1-5mb/sec when loading stuff in Visual Studio and other apps and it doesn't seem like the CPU is bottlenecking as the CPU utilization is pretty low. I don't recall what Access Time used to be, but HD Tune is reporting 12.6ms Read throughput is showing as averaging about 125MB/sec so it should be great for sequential reads. Defrag daily and it shows fragmentation levels low, so that shouldn't be an issue. Additional info, Windows 7 x64, Intel raid controller on mobo, WD Black 500GB (I think 32mb cache) x2.

    Read the article

  • Raid0 performance degradation?

    - by davy8
    Not sure if this belongs here or on SuperUser, feel free to move as appropriate. I've noticed the performance on my RAID0 setup seems to have degraded over the past months. The throughput is fine, but I think the random access time has increased or something. In use I generally see about 1-5mb/sec when loading stuff in Visual Studio and other apps and it doesn't seem like the CPU is bottlenecking as the CPU utilization is pretty low. I don't recall what Access Time used to be, but HD Tune is reporting 12.6ms Read throughput is showing as averaging about 125MB/sec so it should be great for sequential reads. Defrag daily and it shows fragmentation levels low, so that shouldn't be an issue. Additional info, Windows 7 x64, Intel raid controller on mobo, WD Black 500GB (I think 32mb cache) x2.

    Read the article

  • Disk boot failure, insert system disk and press Enter.

    - by torbengb
    Similar to this related question, I came home and found that my media center pc showed this message, Disk boot failure, insert system disk and press Enter Before I do anything with the (defective?) harddisk, what are the best first steps I can take to fix this with a minimum of damage? Normally the machine (Win Vista) is always on and never reboots by itself (Windows auto-updates are disabled too). Something must have caused it to reboot, though I'm sure we didn't have a power outage. The machine can't reboot on that disk, but it will boot on another disk I just plugged in for testing. I haven't changed anything, or even touched the machine, for several days, and it has been running fine until now. I did replace the power supply some weeks ago, because the old one suddenly stopped working. It has been working fine with the replacement PSU.

    Read the article

  • Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

    - by Matt Taylor
    Hello, I recently did a full upgrade of windows 7 on my thinkpad, everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen just before the Windows logo appears, disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this wont boot with battery plugged in is greatly appreciated - i need to take this battery out on the road/trains etc.... Cheers Matt

    Read the article

  • My server freezes within a few hours of logging out. Staying logged in keeps the server running

    - by HappyEngineer
    I have an Ubuntu Godaddy server I use to host mail and webapps. It started having problems a couple months ago. It would lock up and stop responding to anything. I couldn't ssh into it, so I'd have godaddy power cycle the server. I have never seen anything that looked suspicious in the var logs (although I'm no expert at reading them). An fsck turned up no problems. Godaddy replaced the ram, but found no hardware problems. I started logging the output from "top" to a log file and found that even that stops running when the server freezes. Now, here is the crazy part: It got so bad that it would actually go down every few hours, but then it stopped going down. I eventually realized I had left an ssh terminal logged into the machine running top. This seemed unlikely to be a reason, but after the server was up with no problems for a full week (remember, it had been going down after just a few hours), I disconnected from the ssh session. Lo and behold, within a few hours the server froze again! I had them power cycle again and then left another ssh session open with top. It has been going without problems for 8 days now. I told others about this and they hardly believe me. I simply can't imagine what is going on. I don't know what else to try other than to just get a new server and reinstall everything. Does anyone have any ideas about what I can look for to determine what the cause is? Is it possible there's some sort of exploit on the server which only runs if everyone is logged out of the system? EDIT: The power management gone haywire sounds plausible, so I've modified the /boot/grub/menu.lst to boot with acpi=off and apm=off. It appears to have prevented kacpid and kacpid_notify from being in the process list, so I assume I did that right. I've disconnected all my sessions from the server. I'll check later tonight to see if it's still up. If it goes down then I'll try the pinging process idea. EDIT: It went down again. It lasted about a day. I've had them reboot, so now I'll try running "nohup ping -i 5 google.com &" and then disconnect. If it goes down again I'll come back. Hopefully someone will have some more ideas.

    Read the article

  • What causes winsock 10055 errors? How should I troubleshoot?

    - by Tom Kerr
    I'm investigating some issues with winsock 10055 errors on a chain of custom applications (some of which we control, some not) and was hoping to get some advice on techniques to troubleshoot the problem. No buffer space available. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. From research, non-paged pool and ports seem to be the only resources which can cause this error. Is there another resource which might cause 10055 errors? Currently, we have perfmon counters setup on the applications and non-paged pool usage looks low in most circumstances. Open TCP connections looks low and I am unaware of another way to monitor ports. Since it only happens in production, we are unable to use more invasive counters. Is there some other tool or procedure you would recommend to diagnose which application is causing the issue?

    Read the article

  • New graphics card (GTX 760) slowing down entire PC

    - by Cayetano Gonçalves
    My new graphics card is making my PC totally unusable. It boots up really slowly, and when the windows screen comes on, the mouse lags really far behind. Nothing opens at a normal speed. However, when I put in my 5-year old graphics card, it all works fine. I'm currently using a Foxconn Renaissance LGA 1366 Intel X58 ATX Motherboard, Intel Motherboard Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Processor, and a EVGA SuperNOVA 850G2 80PLUS Gold Certified ATX12V/EPS12V 850W Power Supply . I know it can't be the power supply, because I just bought it today to try to fix the problem. I've also installed the newest version of BIOS available for my motherboard. I've also seen extreme variations in CPU while the new graphics card is in, and when the old graphics card is installed, it is much calmer. Any thoughts?

    Read the article

  • How to prevent hard drive from spinning down Windows 7?

    - by JL.
    I had a Western Digital External 1TB drive, which I was accessing via USB. I decided one day, that I would prefer to mount the HDD in my case, and access it via SATA interface. So I took it apart, and the actual mounting was a breeze. The only thing is, I think the device has some default power saving features, which means the device tends to stop spinning when idle for (x) amount of time. This creates delays when I am accessing the HDD. Is there anyway I can turn off these power saving features for this HDD?

    Read the article

  • RAID1 rebuild fails due to disk errors

    - by overlord_tm
    Quick info: Dell R410 with 2x500GB drives in RAID1 on H700 Adapter Recently one of drives in RAID1 array on server failed, lets call it Drive 0. RAID controller marked it as fault and put it offline. I replaced faulty disk with new one (same series and manufacturer, just bigger) and configured new disk as hot spare. Rebuild from Drive1 started immediately and after 1.5 hour I got message that Drive 1 failed. Server was unresponsive (kernel panic) and required reboot. Given that half hour before this error rebuild was at about 40%, I estimated that new drive is not in sync yet and tried to reboot just with Drive 1. RAID controller complained a bit about missing RAID arrays, but it found foreign RAID array on Drive 1 and I imported it. Server booted and it runs (from degraded RAID). Here is SMART data for disks. Drive 0 (the one that failed first) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 3 Spin_Up_Time POS--K 142 142 021 - 3866 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10432 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 112 106 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 198 000 - 3 And Drive 1 (the drive which was reported healthy from controller until rebuild was attempted) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 35 3 Spin_Up_Time POS--K 143 143 021 - 3841 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10455 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 114 105 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 3 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 In extended error logs from SMART I found: Drive 0 has only one error Error 1 [0] occurred at disk power-on lifetime: 10282 hours (428 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 18 00 00 00 6a 24 20 40 00 Error: IDNF at LBA = 0x006a2420 = 6956064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 60 00 f8 00 00 00 6a 24 20 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 18 00 60 00 00 00 6a 24 00 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 80 00 58 00 00 00 6a 23 80 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 68 00 50 00 00 00 6a 23 18 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 10 00 10 00 00 00 6a 23 00 40 00 17d+20:25:18.104 WRITE FPDMA QUEUED But Drive 1 has 883 errors. I see only few last ones and all errors I can see look like this: Error 883 [18] occurred at disk power-on lifetime: 10454 hours (435 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 00 80 00 00 39 97 19 c2 40 00 Error: AMNF at LBA = 0x399719c2 = 966203842 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:57.802 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:57.779 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:55.704 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:55.681 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:53.606 READ FPDMA QUEUED Given those errors, is there any way I can rebuild RAID back, or should I make backup, shutdown server, replace disks with new ones and restore it? What about if I dd faulty disk to new one from linux running on USB/CD? Also, if anyone have more experiences, what could be causes for those errors? Crappy controller or disks? Disks are about 1 year old, but it is pretty unbelievable to me that both would die within so short timespan.

    Read the article

  • Is this a graphics card failure?

    - by Alexander Lozada
    I own an older 32-bit Dell XPS 410 that I intended to use for gaming. Currently, I have a ATI Radeon 4000 series card installed, along with a Core 2 Duo and Ubuntu 12.10. I'm fairly certain that my problem is a GPU failure - but before I spend money on a new one, I want to make sure other components aren't the problem/if it would be cheaper just to buy a new PC. Here are my symptoms: Computer power button remains orange (usually green when successfully started.) A fan gets increasingly faster until powered off. Monitor remains black when started, receiving no signal. When powered on, the computer will power itself off near instantly, and then turn on again. If startup is successful, sometimes the screen will become jittered and unusable unless restarted. Is this just a GPU failure, or something more extensive like the motherboard?

    Read the article

  • UPS recommendations for three grey boxes?

    - by Margaret
    Hey all We have a series of grey-box style computers acting as servers at my workplace (rather than rack-mount). We were looking to get Uninterruptible Power Supplies for them. However, I'm not sure how many at what capacity are required. I'd assume it would be a good idea to hook the peripherals in as well - there's a 18.5" LCD monitor with a KVM, along with a couple of USB hard drives that require power. I currently have the most vital machine hooked up to a cheap (temporary) UPS, but it's probably close to worse than nothing. I'm looking for reasonable value for money, though I can probably negotiate with my boss on price range. I recognise that I may well need to buy two (or even three) UPSs to support the three machines. Any recommendations?

    Read the article

  • Round-Robin DNS in mobile networks

    - by k7k0
    After reading load distribution alternatives and giving my limited skills on the area I'm biased toward round-robin DNS strategy. From what I understood, one key aspect of DNS Round-Robin is setting a low TTL value, avoiding caching. My main concern is that all my traffic comes from mobile networks, almost 30% of that comes from t-mobile 3G. Some questions: 1) Is there a chance that almost all clients on the same mobile network will be redirected to the same IP in the TTL frame? That would kill the distribution technique. 2) If I choose a really low TTL (zero or one). That impacts directly over client performance? It does a DNS miss every time or it's a setting that only impacts on DNS servers? Any help would be much appreciated. Thanks

    Read the article

  • Is it possible to mount a hot-swappable drive when it is turned on?

    - by John
    In my PC, I have a hot-swap drive. Usually I keep it off to save power. I only really use it when accessing from another PC on the network. Is it possible to configure /etc/fstab to mount this drive when I turn it on (without having to shake the mouse, open file manager and click the drive to have it mounted? Currently, I have: UUID=a869e5ca-7d3b-4d64-91e2-eadbecd8c9e5 /media/i-TVShows ext4 rw,nosuid,nodev,auto,user,uhelper=udisks 0 0 in my /etc/fstab file but it doesn't seem to do the trick. I want the drive to be user-mountable, on power on, with RW access, and I'm thinking of adding 'nofail'...this is my first time writing to the fstab file, and a lot of the parameters I took from the output of 'mount' so feel free to correct any oddness you find. Thanks

    Read the article

  • Dual boot OSX and Windows 7 natively

    - by Phill
    I'm considering getting one of those new fancy Mac Book Pro's with the fancy screens, but after reading some stuff on the internets about running Windows 7 with bootcamp: https://discussions.apple.com/thread/2770866?start=0&tstart=0 It seems you can't use the integrated graphics with windows, this causes windows to chew the battery life: I am afraid it is not possible. Since Apple introduced dual graphics chip laptops, they kept the low power/embedded GPU hidden under Window and they expose only the power hungry discrete GPU. It feels that this is being done on purpose so that it appears to users that OS X offers a better experience and battery life over Windows. So running bootcamp and windows kills the battery, running in parallels means you don't get accelerated 3d support (or something along those lines), so you don't get the performance out of it. I'm wondering: Is it possible to natively dual boot Windows 7 on a MBP, and if so would/does that give windows access to the integrated graphics to be able to not rape the battery?

    Read the article

  • Mini-ITX board for AM3 Athlon X4 600e processor.

    - by Kamil Zadora
    Hello, I am planning to build a PC to control a robotic platform that I am building (about 50% complete). I need more power than ATOM platform could bring, as the robot will need to do on the fly image processing to work as intended. I was considering using Athlon X4 600e as it is rated 45W Maximum output. Probably underclocked it would go lower than 30-35W. I do not I'am at very long battery life, but the 17Ah, 12V battery should keep it running for few hours. My problem is: motherboard. I am space limited so I am looking for a nice mini-itx AM3 motherboard to match the processor. It is hard to find many tests about power usage of the motherboards itself (for example, when using the same processor on different motherboards, test are usualy done in the opposite matter). Could you provide any motherboard examples or suggest what chipset to look for? Thank you in advance.

    Read the article

  • Find optimal strategy and AI for the game 'Proximity'?

    - by smci
    'Proximity' is a strategy game of territorial domination similar to Othello, Go and Risk. Two players, uses a 10x12 hex grid. Game invented by Brian Cable in 2007. Seems to be a worthy game for discussing a) optimal algorithm then b) how to build an AI. Strategies are going to be probabilistic or heuristic-based, due to the randomness factor, and the insane branching factor (20^120). So it will be kind of hard to compare objectively. A compute time limit of 5s per turn seems reasonable. Game: Flash version here and many copies elsewhere on the web Rules: here Object: to have control of the most armies after all tiles have been placed. Each turn you received a randomly numbered tile (value between 1 and 20 armies) to place on any vacant board space. If this tile is adjacent to any ally tiles, it will strengthen each tile's defenses +1 (up to a max value of 20). If it is adjacent to any enemy tiles, it will take control over them if its number is higher than the number on the enemy tile. Thoughts on strategy: Here are some initial thoughts; setting the computer AI to Expert will probably teach a lot: minimizing your perimeter seems to be a good strategy, to prevent flips and minimize worst-case damage like in Go, leaving holes inside your formation is lethal, only more so with the hex grid because you can lose armies on up to 6 squares in one move low-numbered tiles are a liability, so place them away from your main territory, near the board edges and scattered. You can also use low-numbered tiles to plug holes in your formation, or make small gains along the perimeter which the opponent will not tend to bother attacking. a triangle formation of three pieces is strong since they mutually reinforce, and also reduce the perimeter Each tile can be flipped at most 6 times, i.e. when its neighbor tiles are occupied. Control of a formation can flow back and forth. Sometimes you lose part of a formation and plug any holes to render that part of the board 'dead' and lock in your territory/ prevent further losses. Low-numbered tiles are obvious-but-low-valued liabilities, but high-numbered tiles can be bigger liabilities if they get flipped (which is harder). One lucky play with a 20-army tile can cause a swing of 200 (from +100 to -100 armies). So tile placement will have both offensive and defensive considerations. Comment 1,2,4 seem to resemble a minimax strategy where we minimize the maximum expected possible loss (modified by some probabilistic consideration of the value ß the opponent can get from 1..20 i.e. a structure which can only be flipped by a ß=20 tile is 'nearly impregnable'.) I'm not clear what the implications of comments 3,5,6 are for optimal strategy. Interested in comments from Go, Chess or Othello players. (The sequel ProximityHD for XBox Live, allows 4-player -cooperative or -competitive local multiplayer increases the branching factor since you now have 5 tiles in your hand at any given time, of which you can only play one. Reinforcement of ally tiles is increased to +2 per ally.)

    Read the article

  • Something eating space on OS drive

    - by noquery
    I am facing low disk space issue from last few days. I checked with Restore,System Volume Information, $Recycled folders. But there is nothing which is occupying space. I had scanned my system for virus too. Total size of C: is 18 GB. But when I select all folders inside C: and query for used space, it shows 20+ gb space is used. I vacate space some how by deleting temp files, program's cache files, disk clean up etc up to (3 gb). And I ensured that no cache/temp files are recreated who can use the space again. Even after cleaning so much data, I am again facing low disk space issue. Something is eating disk space within 15-20 mins.

    Read the article

  • In ufw is there any way to disable logging for a particular rule?

    - by thomasrutter
    I am using UFW with a default logging policy of "low". I would like to keep this logging on for the default deny action, but disable it for a particular IP address only. So I'd like to create one particular new rule that doesn't have logging. Is there a way to achieve this? I have a rather uncomplicated ufw setup so far, like this: Status: active Logging: on (low) Default: deny (incoming), allow (outgoing) New profiles: skip To Action From -- ------ ---- 22/tcp LIMIT Anywhere 80/tcp ALLOW Anywhere 443/tcp ALLOW Anywhere 22/tcp ALLOW Anywhere (v6) 80/tcp ALLOW Anywhere (v6) 443/tcp ALLOW Anywhere (v6)

    Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >