Search Results

Search found 2612 results on 105 pages for 'nick wall'.

Page 98/105 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

• Why won't USB 3.0 external hard drive run at USB 3.0 speeds?

  - by jgottula

  I recently purchased a PCI Express x1 USB 3.0 controller card (containing the NEC USB 3.0 controller) with the intent of using a USB 3.0 external hard drive with my Linux box. I installed the card in an empty PCIe slot on my motherboard, connected the card to a power cable, strung a USB 3.0 cable between one of the new ports and my external HDD, and connected the HDD to a wall socket for power. Booting the system, the drive works 100% as intended, with the one exception of throughput: rather than using SuperSpeed 4.8 Gbps connectivity, it seems to be falling back to High Speed 480 Mbps USB 2.0-style throughput. Disk Utility shows it as a 480 Mbps device, and running a couple Disk Utility and dd benchmarks confirms that the drive fails to exceed ~40 MB/s (the approximate limit of USB 2.0), despite it being an SSD capable of far more than that. When I connect my USB 3.0 HDD, dmesg shows this: [ 3923.280018] usb 3-2: new high speed USB device using ehci_hcd and address 6 where I would expect to find this: [ 3923.280018] usb 3-2: new SuperSpeed USB device using xhci_hcd and address 6 My system was running on kernel 2.6.35-25-generic at the time. Then, I stumbled upon this forum thread by an individual who found that a bug, which was present in kernels prior to 2.6.37-rc5, could be the culprit for this type of problem. Consequently, I installed the 2.6.37-generic mainline Ubuntu kernel to determine if the problem would go away. It didn't, so I tried 2.6.38-rc3-generic, and even the 2.6.38 nightly from 2010.02.01, to no avail. In short, I'm trying to determine why, with USB 3.0 support in the kernel, my USB 3.0 drive fails to run at full SuperSpeed throughput. See the comments under this question for additional details. Output that might be relevant to the problem (when booting from 2.6.38-rc3): Relevant lines from dmesg: [ 19.589491] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.589512] xhci_hcd 0000:03:00.0: setting latency timer to 64 [ 19.589516] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 19.589623] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 12 [ 19.650492] xhci_hcd 0000:03:00.0: irq 17, io mem 0xf8100000 [ 19.650556] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 19.650560] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 19.650563] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 19.653946] xHCI xhci_add_endpoint called for root hub [ 19.653948] xHCI xhci_check_bandwidth called for root hub Relevant section of sudo lspci -v: 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f8100000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd Relevant section of sudo lsusb -v: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.38-020638rc3-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:03:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Full, non-verbose lsusb: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 003: ID 04d9:0702 Holtek Semiconductor, Inc. Bus 009 Device 002: ID 046d:c068 Logitech, Inc. G500 Laser Mouse Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 006: ID 174c:5106 ASMedia Technology Inc. Bus 003 Device 004: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 006: ID 1687:0163 Kingmax Digital Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 046d:081b Logitech, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Full output: full dmesg full lspci full lsusb

  Read the article

• Windows Phone 8 Launch Event Summary

  - by Tim Murphy

  Today was the official coming out party for Windows Phone 8.  Below is a summary of the launch event.  There is a lot here to stay with me. They started with a commercial staring Joe Belfiore show how his Windows Phone 8 was personal too him which highlights something I think Microsoft has done well over the last couple of event: spotlight how Windows Phone is a different experience from other smartphones.  Joe actually called iPhone and Android “tired old metaphors" and explained that the idea around Windows Phone was to “reinvent the smartphone around you” as “the most personal smartphone operating system”.  The is the message that they need to drive home in their adds. The only real technical aspect we found out was that they have optimized the operating system around the dual core Qualcomm Snapdragon chip set.  It seems like all of the other hardware goodies had already been announced.  The remainder of the event was centered around new features of the OS and app announcements. So what are we getting?  The integrated features included lock screen live tile, Data Sense, Rooms and Kids corner.  There wasn’t a lot of information about it, but Joe also talked about apps not just having live tiles, but being live apps that could integrate with wallet and the hub. The lock screen will now be able to be personalized with live tile data or even a photo slide show.  This gives the lock screen an even better ability to give you the information you want to know before you even unlock the phone. The Kids Corner allows you as a parent to setup an area on your phone that you kids can go into an use it without disturbing your apps.  They can play games or use apps that you have designated and will only see those apps.  It even has a special lock screen gesture just for the kids corner. Rooms allow you to organize your phone around the groups of people in your life.  You get a shared calendar, a room wall as well as shared notes beyond just being able to send messages to a group.  You can also invite people not on the Windows Phone platform to access an online version of the room. Data Sense is a new feature that gives you better control and understanding of your data plan usage.  You can see which applications are using data and it can automatically adjust they way your phone behaves as you get close to your data limit. Add to these features the fact that the entire Windows ecosystem is integrated with SkyDrive and you have an available anywhere experience that is unequaled by any other platform.  Your document, photos and music are available on your Windows Phone, Window 8 device and Xbox.  SkyDrive also doesn’t limit how long you can keep files like the competing cloud platforms and give more free storage. It was interesting the way they made the launch event more personal.  First Joe brought out his own kids to demo the Kids Corner.  They followed this up by bringing out Jessica Alba to discuss her experience on the Windows Phone 8.  They need to keep putting a face on the product instead of just showing features as a cold list. Then we get to apps.  We knew that the new Skype was coming, but we found out that it was created in such a way that it can receive calls without running consistently in the background which would eat up battery.  This announcement was follow by the coming Facebook app that is optimized for Windows Phone 8.  As a matter of fact they indicated that just after launch the marketplace would have 46 out of the top 50 apps used by all smartphone platforms.  In a rational world this tide with over 120,000 apps currently in the marketplace there should be no more argument about the Windows Phone ecosystem. For those of us who develop for Windows Phone and weren’t on the early adoption program will finally get access to the SDK tomorrow after an announcement at Build (more waiting).  Perhaps we will get a few new features then. In the end I wouldn’t say there were any huge surprises, but I am really excited about getting my hands on the devices next month and starting to develop.  Stay tuned. del.icio.us Tags: Windows Phone,Windows Phone 8,Winodws Phone 8 Launch,Joe Belfiore,Jessica Alba

  Read the article

• Is it possible to specify a generic constraint for a type parameter to be convertible FROM another t

  - by fostandy

  Suppose I write a library with the following: public class Bar { /* ... */ } public class SomeWeirdClass<T> where T : ??? { public T BarMaker(Bar b) { // ... play with b T t = (T)b return (T) b; } } Later, I expect users to use my library by defining their own types which are convertible to Bar and using the SomeWeirdClass 'factory'. public class Foo { public static explicit operator Foo(Bar f) { return new Bar(); } } public class Demo { public static void demo() { Bar b = new Bar(); SomeWeirdClass<Foo> weird = new SomeWeirdClass<Foo>(); Foo f = weird.BarMaker(b); } } this will compile if i set where T : Foo but the problem is that I don't know about Foo at the library's compile time, and I actually want something more like where T : some class that can be instantiated, given a Bar Is this possible? From my limited knowledge it does not seem to be, but the ingenuity of the .NET framework and its users always surprises me... This may or not be related to the idea of static interface methods - at least, I can see the value in being able to specify the presence of factory methods to create objects (similar to the same way that you can already perform where T : new()) edit: Solution - thanks to Nick and bzIm - For other readers I'll provide a completed solution as I understand it: edit2: This solution requires Foo to expose a public default constructor. For an even stupider better solution that does not require this see the very bottom of this post. public class Bar {} public class SomeWeirdClass<T> where T : IConvertibleFromBar<T>, new() { public T BarMaker(Bar b) { T t = new T(); t.Convert(b); return t; } } public interface IConvertibleFromBar<T> { T Convert(Bar b); } public class Foo : IConvertibleFromBar<Foo> { public static explicit operator Foo(Bar f) { return null; } public Foo Convert(Bar b) { return (Foo) b; } } public class Demo { public static void demo() { Bar b = new Bar(); SomeWeirdClass<Foo> weird = new SomeWeirdClass<Foo>(); Foo f = weird.BarMaker(b); } } edit2: Solution 2: Create a type convertor factory to use: #region library defined code public class Bar {} public class SomeWeirdClass<T, TFactory> where TFactory : IConvertorFactory<Bar, T>, new() { private static TFactory convertor = new TFactory(); public T BarMaker(Bar b) { return convertor.Convert(b); } } public interface IConvertorFactory<TFrom, TTo> { TTo Convert(TFrom from); } #endregion #region user defined code public class BarToFooConvertor : IConvertorFactory<Bar, Foo> { public Foo Convert(Bar from) { return (Foo) from; } } public class Foo { public Foo(int a) {} public static explicit operator Foo(Bar f) { return null; } public Foo Convert(Bar b) { return (Foo) b; } } #endregion public class Demo { public static void demo() { Bar b = new Bar(); SomeWeirdClass<Foo, BarToFooConvertor> weird = new SomeWeirdClass<Foo, BarToFooConvertor>(); Foo f = weird.BarMaker(b); } }

  Read the article

• Is it possible to specify a generic constraint for a type parameter to be convertible FROM another t

  - by fostandy

  Suppose I write a library with the following: public class Bar { /* ... */ } public class SomeWeirdClass<T> where T : ??? { public T BarMaker(Bar b) { // ... play with b T t = (T)b return (T) b; } } Later, I expect users to use my library by defining their own types which are convertible to Bar and using the SomeWeirdClass 'factory'. public class Foo { public static explicit operator Foo(Bar f) { return new Bar(); } } public class Demo { public static void demo() { Bar b = new Bar(); SomeWeirdClass<Foo> weird = new SomeWeirdClass<Foo>(); Foo f = weird.BarMaker(b); } } this will compile if i set where T : Foo but the problem is that I don't know about Foo at the library's compile time, and I actually want something more like where T : some class that can be instantiated, given a Bar Is this possible? From my limited knowledge it does not seem to be, but the ingenuity of the .NET framework and its users always surprises me... This may or not be related to the idea of static interface methods - at least, I can see the value in being able to specify the presence of factory methods to create objects (similar to the same way that you can already perform where T : new()) edit: Solution - thanks to Nick and bzIm - For other readers I'll provide a completed solution as I understand it: edit2: This solution requires Foo to expose a public default constructor. For an even stupider better solution that does not require this see the very bottom of this post. public class Bar {} public class SomeWeirdClass<T> where T : IConvertibleFromBar<T>, new() { public T BarMaker(Bar b) { T t = new T(); t.Convert(b); return t; } } public interface IConvertibleFromBar<T> { T Convert(Bar b); } public class Foo : IConvertibleFromBar<Foo> { public static explicit operator Foo(Bar f) { return null; } public Foo Convert(Bar b) { return (Foo) b; } } public class Demo { public static void demo() { Bar b = new Bar(); SomeWeirdClass<Foo> weird = new SomeWeirdClass<Foo>(); Foo f = weird.BarMaker(b); } } edit2: Solution 2: Create a type convertor factory to use: #region library defined code public class Bar {} public class SomeWeirdClass<T, TFactory> where TFactory : IConvertorFactory<Bar, T>, new() { private static TFactory convertor = new TFactory(); public T BarMaker(Bar b) { return convertor.Convert(b); } } public interface IConvertorFactory<TFrom, TTo> { TTo Convert(TFrom from); } #endregion #region user defined code public class BarToFooConvertor : IConvertorFactory<Bar, Foo> { public Foo Convert(Bar from) { return (Foo) from; } } public class Foo { public Foo(int a) {} public static explicit operator Foo(Bar f) { return null; } public Foo Convert(Bar b) { return (Foo) b; } } #endregion public class Demo { public static void demo() { Bar b = new Bar(); SomeWeirdClass<Foo, BarToFooConvertor> weird = new SomeWeirdClass<Foo, BarToFooConvertor>(); Foo f = weird.BarMaker(b); } }

  Read the article

• Netbeans platform projects - problems with wrapped jar files that have dependencies

  - by I82Much

  For starters, this question is not so much about programming in the NetBeans IDE as developing a NetBeans project (e.g. using the NetBeans Platform framework). I am attempting to use the BeanUtils library to introspect my domain models and provide the properties to display in a property sheet. Sample code: public class MyNode extends AbstractNode implements PropertyChangeListener { private static final PropertyUtilsBean bean = new PropertyUtilsBean(); // snip protected Sheet createSheet() { Sheet sheet = Sheet.createDefault(); Sheet.Set set = Sheet.createPropertiesSet(); APIObject obj = getLookup().lookup (APIObject.class); PropertyDescriptor[] descriptors = bean.getPropertyDescriptors(obj); for (PropertyDescriptor d : descriptors) { Method readMethod = d.getReadMethod(); Method writeMethod = d.getWriteMethod(); Class valueType = d.getClass(); Property p = new PropertySupport.Reflection(obj, valueType, readMethod, writeMethod); set.put(p); } sheet.put(set); return sheet; } I have created a wrapper module around commons-beanutils-1.8.3.jar, and added a dependency on the module in my module containing the above code. Everything compiles fine. When I attempt to run the program and open the property sheet view (i.e.. the above code actually gets run), I get the following error: java.lang.ClassNotFoundException: org.apache.commons.logging.LogFactory at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:319) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:330) at java.lang.ClassLoader.loadClass(ClassLoader.java:254) at org.netbeans.ProxyClassLoader.loadClass(ProxyClassLoader.java:259) Caused: java.lang.ClassNotFoundException: org.apache.commons.logging.LogFactory starting from ModuleCL@64e48e45[org.apache.commons.beanutils] with possible defining loaders [ModuleCL@75da931b[org.netbeans.libs.commons_logging]] and declared parents [] at org.netbeans.ProxyClassLoader.loadClass(ProxyClassLoader.java:261) at java.lang.ClassLoader.loadClass(ClassLoader.java:254) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:399) Caused: java.lang.NoClassDefFoundError: org/apache/commons/logging/LogFactory at org.apache.commons.beanutils.PropertyUtilsBean.<init>(PropertyUtilsBean.java:132) at org.myorg.myeditor.MyNode.<clinit>(MyNode.java:35) at org.myorg.myeditor.MyEditor.<init>(MyEditor.java:33) at org.myorg.myeditor.OpenEditorAction.actionPerformed(OpenEditorAction.java:13) at org.openide.awt.AlwaysEnabledAction$1.run(AlwaysEnabledAction.java:139) at org.netbeans.modules.openide.util.ActionsBridge.implPerformAction(ActionsBridge.java:83) at org.netbeans.modules.openide.util.ActionsBridge.doPerformAction(ActionsBridge.java:67) at org.openide.awt.AlwaysEnabledAction.actionPerformed(AlwaysEnabledAction.java:142) at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:2028) at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2351) at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387) at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242) at javax.swing.AbstractButton.doClick(AbstractButton.java:389) at com.apple.laf.ScreenMenuItem.actionPerformed(ScreenMenuItem.java:95) at java.awt.MenuItem.processActionEvent(MenuItem.java:627) at java.awt.MenuItem.processEvent(MenuItem.java:586) at java.awt.MenuComponent.dispatchEventImpl(MenuComponent.java:317) at java.awt.MenuComponent.dispatchEvent(MenuComponent.java:305) [catch] at java.awt.EventQueue.dispatchEvent(EventQueue.java:638) at org.netbeans.core.TimableEventQueue.dispatchEvent(TimableEventQueue.java:125) at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:296) at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211) at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:201) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:196) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:188) at java.awt.EventDispatchThread.run(EventDispatchThread.java:122) I understand that beanutils is using the commons-logging component. I have tried adding the commons-logging component in two different ways (creating a wrapper library around the commons-logging library, and putting a dependency on the Commons Logging Integration library). Neither solves the problem. I noticed that the same problem occurs with other wrapped libraries; if they themselves have external dependencies, the ClassNotFoundExceptions propagate like mad, even if I've wrapped the jars of the libraries they require and added them as dependencies to the original wrapped library module. Pictorially: I'm at my wits end here. I noticed similar problems while googling: Is there a known bug on NB Module dependency Same issue I'm facing but when wrapping a different jar NetBeans stance on this - none of the 3 apply to me. None conclusively help me. Thank you, Nick

  Read the article

• WPF ListBox/View Data Binding weird result

  - by Aviatrix

  I have this problem when i try to synchronize a observable list with listbox/view it displays the first item X times (x total amount of records in the list) but it doesn't change the variable's here is the XAML <ListBox x:Name="PostListView" BorderThickness="0" MinHeight="300" Background="{x:Null}" BorderBrush="{x:Null}" Foreground="{x:Null}" VerticalContentAlignment="Top" ScrollViewer.HorizontalScrollBarVisibility="Disabled" ScrollViewer.VerticalScrollBarVisibility="Disabled" DataContext="{Binding Source={StaticResource PostListData}}" ItemsSource="{Binding Mode=OneWay}" IsSynchronizedWithCurrentItem="True" MinWidth="332" SelectedIndex="0" SelectionMode="Extended" AlternationCount="1"> <ListBox.ItemTemplate> <DataTemplate> <DockPanel x:Name="SinglePost" VerticalAlignment="Top" ScrollViewer.CanContentScroll="True" ClipToBounds="True" Width="333" Height="70" d:LayoutOverrides="VerticalAlignment" d:IsEffectDisabled="True"> <DockPanel.DataContext> <local:PostList/> </DockPanel.DataContext> <StackPanel x:Name="AvatarNickHolder" Width="60"> <Label x:Name="Nick" HorizontalAlignment="Center" Margin="5,0" VerticalAlignment="Top" Height="15" Content="{Binding Path=pUsername, FallbackValue=pUsername}" FontFamily="Arial" FontSize="10.667" Padding="5,0"/> <Image x:Name="Avatar" HorizontalAlignment="Center" Margin="5,0,5,5" VerticalAlignment="Top" Width="50" Height="50" IsHitTestVisible="False" Source="1045443356IMG_0972.jpg" Stretch="UniformToFill"/> </StackPanel> <TextBlock x:Name="userPostText" Margin="0,0,5,0" VerticalAlignment="Center" FontSize="10.667" Text="{Binding Path=pMsg, FallbackValue=pMsg}" TextWrapping="Wrap"/> </DockPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> and here is the ovservable list class public class PostList : ObservableCollection<PostData> { public PostList() : base() { Add(new PostData("this is test msg", "Cather", "1045443356IMG_0972.jpg")); Add(new PostData("this is test msg1", "t1", "1045443356IMG_0972.jpg")); Add(new PostData("this is test msg2", "t2", "1045443356IMG_0972.jpg")); Add(new PostData("this is test msg3", "t3", "1045443356IMG_0972.jpg")); Add(new PostData("this is test msg4", "t4", "1045443356IMG_0972.jpg")); Add(new PostData("this is test msg5", "t5", "1045443356IMG_0972.jpg")); // Add(new PostData("Isak", "Dinesen")); // Add(new PostData("Victor", "Hugo")); // Add(new PostData("Jules", "Verne")); } } public class PostData { private string Username; private string Msg; private string Avatar; private string LinkAttached; private string PicAttached; private string VideoAttached; public PostData(string msg ,string username, string avatar=null, string link=null,string pic=null ,string video=null) { this.Username = username; this.Msg = msg; this.Avatar = avatar; this.LinkAttached = link; this.PicAttached = pic; this.VideoAttached = video; } public string pMsg { get { return Msg; } set { Msg = value; } } public string pUsername { get { return Username; } set { Username = value; } } public string pAvatar { get { return Avatar; } set { Avatar = value; } } public string pLink { get { return LinkAttached; } set { LinkAttached = value; } } public string pPic { get { return PicAttached; } set { PicAttached = value; } } public string pVideo { get { return VideoAttached; } set { VideoAttached = value; } } } Any ideas ?

  Read the article

• uiscrollview not switching image subviews

  - by nickthedude

  I'm building a comic viewer app, that consists of two view controllers, the root viewcontroller basically displays a view where a user decides what comic they want to read by pressing a button. The second viewController actually displays the comic as a uiscrollview with a toolbar and a title at the top. So the problem I am having is that the comic image panels themselves are not changing from whatever the first comic you go to if you select another comic after viewing the first one. The way I set it up, and I admit it's not exactly mvc, so please don't hate, anyway the way I set it up is each comic uiscrollview consists of x number of jpg images where each comic set's image names have a common prefix and then a number like 'funny1.jpg', 'funny2.jpg', 'funny3.jpg' and 'soda1.jpg', 'soda2.jpg', 'soda3.jpg', etc... so when a user selects a comic to view in the root controller it makes a call to the delegate and sets ivars on instances of the comicviewcontroller that belongs to the delegate (mainDelegate.comicViewController.property) I set the number of panels in that comic, the comic name for the title label, and the image prefix. The number of images changes(or at least the number that you can scroll through), and the title changes but for some reason the images are the same ones as whatever comic you clicked on initially. I'm basing this whole app off of the 'scrolling' code sample from apple. I thought if I added a viewWillAppear:(BOOL) animated call to the comicViewController everytime the user clicked the button that would fix it but it didn't, after all that is where the scrollview is laid out. Anyway here is some code from each of the two controllers: RootController: -(IBAction) launchComic2{ AppDelegate *mainDelegate = [(AppDelegate *) [UIApplication sharedApplication] delegate]; mainDelegate.myViewController.comicPageCount = 3; mainDelegate.myViewController.comicTitle.text = @"\"Death by ETOH\""; mainDelegate.myViewController.comicImagePrefix = @"etoh"; [mainDelegate.myViewController viewWillAppear:YES]; [mainDelegate.window addSubview: mainDelegate.myViewController.view]; comicViewController: -(void) viewWillAppear:(BOOL)animated { self.view.backgroundColor = [UIColor viewFlipsideBackgroundColor]; // 1. setup the scrollview for multiple images and add it to the view controller // // note: the following can be done in Interface Builder, but we show this in code for clarity [scrollView1 setBackgroundColor:[UIColor whiteColor]]; [scrollView1 setCanCancelContentTouches:NO]; scrollView1.indicatorStyle = UIScrollViewIndicatorStyleWhite; scrollView1.clipsToBounds = YES; // default is NO, we want to restrict drawing within our scrollview scrollView1.scrollEnabled = YES; // pagingEnabled property default is NO, if set the scroller will stop or snap at each photo // if you want free-flowing scroll, don't set this property. scrollView1.pagingEnabled = YES; // load all the images from our bundle and add them to the scroll view NSUInteger i; for (i = 1; i <= self.comicPageCount; i++) { NSString *imageName = [NSString stringWithFormat:@"%@%d.jpg", self.comicImagePrefix, i]; NSLog(@"%@%d.jpg", self.comicImagePrefix, i); UIImage *image = [UIImage imageNamed:imageName]; UIImageView *imageView = [[UIImageView alloc] initWithImage:image]; // setup each frame to a default height and width, it will be properly placed when we call "updateScrollList" CGRect rect = imageView.frame; rect.size.height = kScrollObjHeight; rect.size.width = kScrollObjWidth; imageView.frame = rect; imageView.tag = i; // tag our images for later use when we place them in serial fashion [scrollView1 addSubview:imageView]; [imageView release]; } [self layoutScrollImages]; // now place the photos in serial layout within the scrollview } - (void)layoutScrollImages { UIImageView *view = nil; NSArray *subviews = [scrollView1 subviews]; // reposition all image subviews in a horizontal serial fashion CGFloat curXLoc = 0; for (view in subviews) { if ([view isKindOfClass:[UIImageView class]] && view.tag 0) { CGRect frame = view.frame; frame.origin = CGPointMake(curXLoc, 0); view.frame = frame; curXLoc += (kScrollObjWidth); } } // set the content size so it can be scrollable [scrollView1 setContentSize:CGSizeMake((self.comicPageCount * kScrollObjWidth), [scrollView1 bounds].size.height)]; } Any help would be appreciated on this. Nick

  Read the article

• CodePlex Daily Summary for Friday, March 19, 2010

  CodePlex Daily Summary for Friday, March 19, 2010New Projects[Tool] Vczh Visual Studio UnitTest Coverage Analyzer: Analyzing Visual Studio Unittest Coverage Exported XML filecrudwork is a library of reuseable classes for developing .NET applications: crudwork is a collection of reuseable .NET classes and features. If you searched for StpLibrary and landed here, you're in the right place. Origi...CWU Animated AVL Tree Tutorial: This is a silverlight demo of a self-balancing AVL tree. On the original team were CWU undergraduates Eric Brown, Barend Venter, Nick Rushton, Arry...DotNetNuke® Skin Modern: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by Salar Golestanian of SalarO. The skin utilizes both the telerik...DotNetNuke® Skin Monster: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Jon Edwards of SlumtownHero.co.za. This package uses totally tab...DotNetNuke® Skin Synapse: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Exionyte Solutions. This package features 2 colors with 4...earthworm: Earthworm is a pet project intended as a repository of data access logic, including some ORM, state management and bridging the gap between connect...ema: EMA is a place for collaborative effort to implement a PowerGrid game engine. For more info on PowerGrid the board game see: http://www.boardgamege...Extended SharePoint Web Parts: Extending capabilities of existing SharePoint 2007 Web Parts by inheriting and alterFreedomCraft: Craft development siteG.B SecondLife Sculpter: This is a Sculptor for "secondlife"InfoPath Error Viewer: InfoPath Error Viewer provides an intuitive list to show all errors in the entire InfoPath form. You'll no longer have to find the validation error...LEET (LEET Enhances Exploratory Testing): LEET is a capture-replay tool based on Microsoft’s User Interface Automation Framework. It is targeted at agile teams, and provides support for us...Linq To Entity: Linq,Linq to Entity,EntityMACFBTest: This is a test for a Facebook application.MetaProperties: MetaProperties helps you to create event driven architectures in .NET. It saves you time and it helps you avoid mistakes. It's compatible with WPF ...ownztec web: projeto da ownztec.comParallel Programming Guide: Content for the latest patterns & practices book on design patterns for parallel programming. Downloadable book outline and draft chapters as well ...Perseus - Sistema de Matrícula On-Line: Sistema de matrícula desenvolvido pelo 5º período de Desenvolvimento Web da FACECLA.Project Tru Tiên: Project EL tru tiên, ZhuxianProSysPlus.Net Framework: How do I get the ease and efficiency of my work in VFP (R.I.P. 2010)? The answer is here: the ProSysPlus.Net Framework. Why is it open source? Wh...Quick Anime Renamer: Originally included with AniPlayer X, Quick Anime Renamer easily renames your anime files into a "cleaner" format so you wont get retinal detachment.Simple XNA Button: This is a project of a helper for instancing Simple Buttons in XNA with a ButtonPanel. Its got various features like. Load a Panel from a Plain Tex...SteelVersion - Monitor your .NET Application versioning: SteelVersion helps you to find and store versioning information about .NET assemblies ("Explorer" mode). It also makes it easier to continuously ch...Stellar Results: Astronomical Tracking System for IUPUI CSCI506 - Fall 2007, Team2TheHunterGetsTheDeer: first AIwandal: wandalWeb App Data Architect's CodeCAN: Contains different types of code samples to explore different types of technical solutions/patterns from an architect's point of view.Yet Another GPS: Yet another GPS tracker is a very powerful GPS track application for Windows MobileNew ReleasesASP.Net Client Dependency Framework: v1.0 RC1: ASP.Net Client Dependency has progressed to release candidate 1. With the community feedback and bug reports we've been able to make some great upd...C# FTP Library: FTPLib v1.0.1.1: This release has a couple of small bug fixes as well as the new abilities to specify a port to connect to and to create a new directory with the Cr...crudwork is a library of reuseable classes for developing .NET applications: crudwork 2.2.0.1: crudwork 2.2.0.1 (initial version)DotNetNuke® Skin Modern: Modern Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by Salar Golestanian of SalarO. The skin utilizes both the telerik...DotNetNuke® Skinning Extensions: Nav Menu Demo Skins: This very basic skin demonstrates: 1. How to force NAV menu to generate an unordered list menu 2. The creation of a sub menu, both horizontal and ...DotNetNuke® XML: 04.03.05: XML/XSL Module 04.03.05 Release Candidate This is a maintainace release. Full Quallified Namespace avoids conflicts with Namespaces used by Teler...eCommerce by Onex Community Edition: Installer of eCommerce by Onex Community 1.0: Installer of eCommerce by Onex Community 1.0 Last changes: Added integration with Paypal Corrected of adding photos and attachments to products ...eCommerce by Onex Community Edition: Source code of eCommerce by Onex Community 1.0: Changes in version 1.0: Added integration with Paypal Corrected of adding photos and attachments to products Fixed problem with cancellation of...Employee Info Starter Kit: v2.2.0 (Visual Studio 2005-2008): This is a starter kit, which includes very simple user requirements, where we can create, read, update and delete (CRUD) the employee info of a com...Employee Info Starter Kit: v4.0.0.alpha (Visual Studio 2010): Employee Info Starter Kit is a ASP.NET based web application, which includes very simple user requirements, where we can create, read, update and d...Encrypted Notes: Encrypted Notes 1.4: This is the latest version of Encrypted Notes (1.4). It has an installer - it will create a directory 'CPascoe' in My Documents. Once you have ext...Extended SharePoint Web Parts: ContentQueryAdvanced: This .wsp file contains a single web part ContentQueryAdvanced. This web part inherits from ContentQuery web part and adds a ToolPart field for a ...Extended SharePoint Web Parts: Source Code: Zip file includes all the source code used to extend Content Query Web Part, adding a Tool Part field to insert a CAML query/filter/sortFacebook Developer Toolkit: Version 3.02: Updated copyright. No new functionality. Version 3.1 in the works.fleXdoc: template-based server-side document generator (docx): fleXdoc 1.0 (final): fleXdoc consists of a webservice and a (test)client for the service. Make sure you also download the testclient: you can use it to test the install...InfoPath Error Viewer: InfoPath Error Viewer 1.0: This is an intial version of this tool. You can: 1. View all errors in a list. 2. Locate to a binding control of an error field. 3. See the detai...LEET (LEET Enhances Exploratory Testing): LEET Alpha: The first public release of LEET includes the ability to record tests from running GUIs, assist in writing tests manually from a running GUI, edit ...Linq To Entity: Linq to Entity: The Entity Framework enables developers to work with data in the form of domain-specific objects and properties, such as customers and customer add...MDownloader: MDownloader-0.15.8.56699: Fixed peformance and memory usage. Fixed Letitbit provider. Added detecting IMDB, NFO, TV.com... links in RSS Monitor. Supported password len...MetaProperties: MetaProperties 1.0.0.0: This is a multi-targeted release of MetaProperties for the desktop and Silverlight versions of the .NET framework. The desktop version is fully ...Nito.KitchenSink: Version 2: Added a cancelable Stream.CopyTo. Depends on Nito.Linq 0.2. Please report any issues via the Issue Tracker.Project Server 2007 Timesheet AutoStatus Plus: AutoStatusPlus 1.0.1.0: AutoStatusPlus 1.0.1.0 Supported Systems x86 and x64 Project Server 2007 deployments with or without MOSS 2007 Recommended Patchlevels WSS 3.0: ...Project Tru Tiên: Elements-test V1: Mô tả Bản elements.data - có full ID của bản Elemens.data Tru tiên 2 VIệt Nam (V37) - có full ID của bản Elements.data server offline tru tiên (hiệ...Quick Anime Renamer: Quick Anime Renamer v0.1: AniPlayer X v1.4.5 - started 3/18/2010Initial Release!QuickieB2B: Quickie v1.0b: QuickieB2B - made for DEV4FUN competition organized by Microsoft CroatiaSilverlight 3.0 Advanced ToolTipService: Advanced ToolTipService v2.0.2: This release is compiled against the Silverlight 3.0 runtime. A demonstration on how to set the ToolTip content to a property of the DataContext o...Simple XNA Button: XNA Button 1.0: The Main Project. this uses XNA 3.0 but it can be build with lower versions of XNA Framework. This was made using Visual Studio 2008.StoryQ: StoryQ 2.0.3 Library and Converter UI: New features in this release: Tagging and a tag-capable rich html report. The code generator is capable of generating entire classes This relea...The Silverlight Hyper Video Player [http://slhvp.com]: Version 1.0: Version 1.0VCC: Latest build, v2.1.30318.0: Automatic drop of latest buildWord Index extracts words or sentences from Word document according to patterns: Word Index 1.0.1.0 (For Word 2007 and Word 2003): Word Index for Word 2007 & 2003 : WordIndex.msi (Win-Installer Setup for Word Index) Source code : wordindex.codeplex.comV1.0.1.0.zip : (Source co...Yet Another GPS: YAGPS-Alfa.1: Yet another GPS tracker is a very powerful GPS track application for Windows MobileMost Popular ProjectsMetaSharpRawrWBFS ManagerSilverlight ToolkitASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsLINQ to TwitterRawrOData SDK for PHPjQuery Library for SharePoint Web ServicesDirectQOpen Data App Framework (ODAF)patterns & practices – Enterprise LibraryBlogEngine.NETPHPExcelNB_Store - Free DotNetNuke Ecommerce Catalog Module

  Read the article

• CodePlex Daily Summary for Wednesday, March 31, 2010

  CodePlex Daily Summary for Wednesday, March 31, 2010New ProjectsBase Class Libraries: The Base Class Libraries site hosts samples, previews, and prototypes from the BCL team. BB Scheduler - BroadBand Scheduler: Broadband Scheduler is highly useful as it helps the user to set the time when the computer will automatically enable the Broadband (Internet) conn...BFBC2 PRoCon: BFBC2 PRoCon makes it easier for Bad Company 2 GSP's and private server owners to administer their BFBC2 servers. It's developed in C# and targete...Business Process Management Virtual Environment (BPMVE): This BPMVE project has been separated into 3 different projects. BPMVE_DataStructure project contains all data structures (classes and attribute...Business Rule Engine BizUnit Test Steps: Business Rule Engine BizUnit Test StepsCint: CintContent Edit Extender for Ajax.Net: The Content Edit Extender is an Ajax.Net control extender that allows in-place editing of a div tag (panel). Double-click to edit, hit enter or tab...COV Game: Cov game is a worms like game made on Silverlight with Python server.Cybera: A continuing development project of the existing but now generally inactive former Cybera project.DotNetCRM Community Edition: DotNetCRM Community Edition is an open source, enterprise class CRM built on the .NET platform. It is designed to be extensible, configurable, data...EAV: A sample EAV pattern for SQL Server with: Tables and indexes Partial referential integrity Partial data typing Updatable views (like normal SQL table)EditRegion.MVC: EditRegion.MVC may be all you want, when you do not want a full CMS. It allows html areas to be edited by nominated users or roles. The API follo...Firestarter Modeller: Firestarter ModellerHabanero.Testability: Habanero.TestabilityProSoft CMS: CMS System - scalable over an undeclared amount of servers - publishing services - version control of sitesPS-Blog.net: This is my first project here on codeplex. I would like to write my own blog software. Any comments or critcs are welcome.ReleaseMe: ReleaseMe is a simple little tool I use to copy websites, and custom Window Services, from my development machine to a specified production machin...SAAS-RD: SAAS-RD: uma ferrameta utilizada para prover integração de SaaS com aplicações externasSample Web Application using Telerik's OpenAccess ORM: Sample Web Site Application Project that uses Telerik's OpenAccess ORM for data access.Sistema Facturacion: En el proyecto de Sistema de Facturacion se desarrollara una aplicacion para el total control de un establecimiento comercial Smooth Habanero: Smooth HabaneroSouthEast Conference 2011: For the Florida Institute of Technology IEEE Chapter regarding the Southeast Hardware Conference held in Nashville, TN 2011.SQL Server Bible Standards: A SQL Server Design and Development standards document. SSAS Profiler Trace Scheduler: AS Profiler Scheduler is a tool that will enable Scheduling of SQL AS Tracing using predefined Profiler Templates. For tracking different issues th...Symbolic Algebra: Another attempt to make an algebric system but to be natively in C# under the .net framework. Theocratic Ministry School System: This is an Open Source Theocratic Ministry School System designed for Jehovah's Witnesses. It will include much of the same features as the TMS ver...Weather Report WebControls: The First Release Version:1.0.10330.2334WPF 3D Labyrinth: A project for "Design and Analysis of Computer Algorithms" subject at Kaunas University of Technology. Building a 3D labyrinth with a figure which ...WPF Zen Garden: This is intended to be a gallery for WPF Style sheets in the form of Css Zen Garden. New ReleasesAPSales CRM - Software as a Service: APSales 0.1.3: This version add some interesting features to the project: Implement "Filter By Additional Fields" in view edit Implement quick create function Im...Base Class Libraries: BigRational: BigRational builds on the BigInteger introduced in .NET Framework 4 to create an arbitrary-precision rational number type. A rational number is a ...Base Class Libraries: Long Path: The long path wrapper provides functionality to make it easier to work with paths that are longer than the current 259 character limit of the Syste...Base Class Libraries: PerfMonitor: PerfMonitor is a command-line tool for profiling the system using Event Tracing for Windows (ETW). PerfMonitor is built on top of the TraceEvent li...Base Class Libraries: TraceEvent: TraceEvent is an experimental library that greatly simplifies reading Event Tracing for Windows (ETW) events. It is used by the PerfMonitor tool. ...BB Scheduler - BroadBand Scheduler: Broadband Scheduler v2.0: - Broadband service has some of the cheap and best monthly plans for the users all over the nation. And some of the plans include unlimited night d...BuildTools - Toolset for automated builds: BuildTools 2.0 Mar 2010 Milestone: The Mar 2010 Milestone release is a contains a bug fixes for projects not explicitly setting the StartingDate property, and no longer breaks when t...Business Rule Engine BizUnit Test Steps: BRE BizUnit Test Steps Ver. 1.0: Version 1.0Claymore MVP: Claymore 1.1.0.0: Changelog Added Compact Framework support Added fluent interface to configure the library.Content Edit Extender for Ajax.Net: ContentEditExtender 1.0 for Ajax.Net: Complete with source control and test/example Website and Web Service. Built with Visual Studio 2008 with the 3.5 BCL. Control requires the AjaxCon...dylan.NET: dylan.NET v. 9.6: This stable version of the compiler for both .NET 3.5 and 4.0 adds the loading of numbers in a bult-in fashion. See code below: #refasm mscorlib...EAV: March 2010: The initial release as demoed at the SSWUG Virtual Conference Spring 2010Fax .NET: Fax .NET 1.0.1: FIX : bugs for x64 and WOW64 architecture. The zip file include : Binary file Demo executable file Help fileFluent Ribbon Control Suite: Fluent Ribbon Control Suite 1.0 for NET 4.0 RC: Includes: Fluent.dll (with .pdb and .xml) compiled with .NET 4.0 RC Test application compiled with .NET 4.0 RC SourcesIceChat: IceChat 2009 Alpha 12.1 Full Install: Build Alpha 12.1 - March 30 2010 Fix Nick Name Change for Tabs/Server List for Queries Fix for running Channel List Multiple Times, clears list n...Import Excel data to SharePoint List: Import Data from Spreadsheet to SP List V1.5 x64: Import from Spreadsheet to a SharePoint List is the missing facet to the WSS 3.0 / MOSS 2007 List features. SharePoint lets a user create a custom...LINQ to Twitter: LINQ to Twitter Beta v2.0.9: New items added since v1.1 include: Support for OAuth (via DotNetOpenAuth), secure communication via https, VB language support, serialization of ...mojoPortal: 2.3.4.1: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2341-released.aspxocculo: test: Release build for testers.PowerShell ToodleDo Module: 0.1: Initial Development Release - Very rough build.Quick Performance Monitor: Version 1.2: Fixed issue where app crash when performance counter disappear or becomes unavailable while the application is running. For now the exception is si...Quick Performance Monitor: Version 1.3: Add 'view last error'Rule 18 - Love your clipboard: Rule 18 (Visual Studio 2010 + .NET 4 RC Version): This is the second public beta for the first version of Rule 18. It has had a extensive private beta and been used in big presentations since the ...Selection Maker: Selection Maker 1.5: New Features:If the source folder does not exist,a dialog box will appear and ask the user if he/she wants to create that folder or if select anoth...sPATCH: sPatch v0.9a: + Fixed: wrong path to elementclient.exeSQL Server Bible Standards: March 2010: Initial release as presented at SSWUG Virtual Conference Spring 2010Survey - web survey & form engine: Source Code Documentation: Documentation.chm file as published with Nsurvey v. 1.9.1 - april 2005 Basic technical documentation and description of source code for developers...Theocratic Ministry School System: Theocratic Ministry School System - TMSS: This is the first release of TMSS. It is far from complete but demonstrates the possiablities of what can be done with Access 2007 using developer ...Weather Report WebControls: WeatherReport Controls: 本下载包含一个已经经过编译的二进制运行库和一个测试的WebApplication项目，是2010年3月30日发布的Most Popular ProjectsRawrWBFS ManagerASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)LiveUpload to FacebookASP.NETMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesBase Class LibrariesBlogEngine.NETManaged Extensibility FrameworkFarseer Physics EngineGraffiti CMSMicrosoft Biology FoundationLINQ to Twitterpatterns & practices – Enterprise Library

  Read the article

• Custom Content Pipeline with Automatic Serialization Load Error

  - by Direweasel

  I'm running into this error: Error loading "desert". Cannot find type TiledLib.MapContent, TiledLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null. at Microsoft.Xna.Framework.Content.ContentTypeReaderManager.InstantiateTypeReader(String readerTypeName, ContentReader contentReader, ContentTypeReader& reader) at Microsoft.Xna.Framework.Content.ContentTypeReaderManager.GetTypeReader(String readerTypeName, ContentReader contentReader, List1& newTypeReaders) at Microsoft.Xna.Framework.Content.ContentTypeReaderManager.ReadTypeManifest(Int32 typeCount, ContentReader contentReader) at Microsoft.Xna.Framework.Content.ContentReader.ReadHeader() at Microsoft.Xna.Framework.Content.ContentReader.ReadAsset[T]() at Microsoft.Xna.Framework.Content.ContentManager.ReadAsset[T](String assetName, Action1 recordDisposableObject) at Microsoft.Xna.Framework.Content.ContentManager.Load[T](String assetName) at TiledTest.Game1.LoadContent() in C:\My Documents\Dropbox\Visual Studio Projects\TiledTest\TiledTest\TiledTest\Game1.cs:line 51 at Microsoft.Xna.Framework.Game.Initialize() at TiledTest.Game1.Initialize() in C:\My Documents\Dropbox\Visual Studio Projects\TiledTest\TiledTest\TiledTest\Game1.cs:line 39 at Microsoft.Xna.Framework.Game.RunGame(Boolean useBlockingRun) at Microsoft.Xna.Framework.Game.Run() at TiledTest.Program.Main(String[] args) in C:\My Documents\Dropbox\Visual Studio Projects\TiledTest\TiledTest\TiledTest\Program.cs:line 15 When trying to run the game. This is a basic demo to try and utilize a separate project library called TiledLib. I have four projects overall: TiledLib (C# Class Library) TiledTest (Windows Game) TiledTestContent (Content) TMX CP Ext (Content Pipeline Extension Library) TiledLib contains MapContent which is throwing the error, however I believe this may just be a generic error with a deeper root problem. EMX CP Ext contains one file: MapProcessor.cs using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Content.Pipeline; using Microsoft.Xna.Framework.Content.Pipeline.Graphics; using Microsoft.Xna.Framework.Content.Pipeline.Processors; using Microsoft.Xna.Framework.Content; using TiledLib; namespace TMX_CP_Ext { // Each tile has a texture, source rect, and sprite effects. [ContentSerializerRuntimeType("TiledTest.Tile, TiledTest")] public class DemoMapTileContent { public ExternalReference<Texture2DContent> Texture; public Rectangle SourceRectangle; public SpriteEffects SpriteEffects; } // For each layer, we store the size of the layer and the tiles. [ContentSerializerRuntimeType("TiledTest.Layer, TiledTest")] public class DemoMapLayerContent { public int Width; public int Height; public DemoMapTileContent[] Tiles; } // For the map itself, we just store the size, tile size, and a list of layers. [ContentSerializerRuntimeType("TiledTest.Map, TiledTest")] public class DemoMapContent { public int TileWidth; public int TileHeight; public List<DemoMapLayerContent> Layers = new List<DemoMapLayerContent>(); } [ContentProcessor(DisplayName = "TMX Processor - TiledLib")] public class MapProcessor : ContentProcessor<MapContent, DemoMapContent> { public override DemoMapContent Process(MapContent input, ContentProcessorContext context) { // build the textures TiledHelpers.BuildTileSetTextures(input, context); // generate source rectangles TiledHelpers.GenerateTileSourceRectangles(input); // now build our output, first by just copying over some data DemoMapContent output = new DemoMapContent { TileWidth = input.TileWidth, TileHeight = input.TileHeight }; // iterate all the layers of the input foreach (LayerContent layer in input.Layers) { // we only care about tile layers in our demo TileLayerContent tlc = layer as TileLayerContent; if (tlc != null) { // create the new layer DemoMapLayerContent outLayer = new DemoMapLayerContent { Width = tlc.Width, Height = tlc.Height, }; // we need to build up our tile list now outLayer.Tiles = new DemoMapTileContent[tlc.Data.Length]; for (int i = 0; i < tlc.Data.Length; i++) { // get the ID of the tile uint tileID = tlc.Data[i]; // use that to get the actual index as well as the SpriteEffects int tileIndex; SpriteEffects spriteEffects; TiledHelpers.DecodeTileID(tileID, out tileIndex, out spriteEffects); // figure out which tile set has this tile index in it and grab // the texture reference and source rectangle. ExternalReference<Texture2DContent> textureContent = null; Rectangle sourceRect = new Rectangle(); // iterate all the tile sets foreach (var tileSet in input.TileSets) { // if our tile index is in this set if (tileIndex - tileSet.FirstId < tileSet.Tiles.Count) { // store the texture content and source rectangle textureContent = tileSet.Texture; sourceRect = tileSet.Tiles[(int)(tileIndex - tileSet.FirstId)].Source; // and break out of the foreach loop break; } } // now insert the tile into our output outLayer.Tiles[i] = new DemoMapTileContent { Texture = textureContent, SourceRectangle = sourceRect, SpriteEffects = spriteEffects }; } // add the layer to our output output.Layers.Add(outLayer); } } // return the output object. because we have ContentSerializerRuntimeType attributes on our // objects, we don't need a ContentTypeWriter and can just use the automatic serialization. return output; } } } TiledLib contains a large amount of files including MapContent.cs using System; using System.Collections.Generic; using System.Globalization; using System.Xml; using Microsoft.Xna.Framework.Content.Pipeline; namespace TiledLib { public enum Orientation : byte { Orthogonal, Isometric, } public class MapContent { public string Filename; public string Directory; public string Version = string.Empty; public Orientation Orientation; public int Width; public int Height; public int TileWidth; public int TileHeight; public PropertyCollection Properties = new PropertyCollection(); public List<TileSetContent> TileSets = new List<TileSetContent>(); public List<LayerContent> Layers = new List<LayerContent>(); public MapContent(XmlDocument document, ContentImporterContext context) { XmlNode mapNode = document["map"]; Version = mapNode.Attributes["version"].Value; Orientation = (Orientation)Enum.Parse(typeof(Orientation), mapNode.Attributes["orientation"].Value, true); Width = int.Parse(mapNode.Attributes["width"].Value, CultureInfo.InvariantCulture); Height = int.Parse(mapNode.Attributes["height"].Value, CultureInfo.InvariantCulture); TileWidth = int.Parse(mapNode.Attributes["tilewidth"].Value, CultureInfo.InvariantCulture); TileHeight = int.Parse(mapNode.Attributes["tileheight"].Value, CultureInfo.InvariantCulture); XmlNode propertiesNode = document.SelectSingleNode("map/properties"); if (propertiesNode != null) { Properties = new PropertyCollection(propertiesNode, context); } foreach (XmlNode tileSet in document.SelectNodes("map/tileset")) { if (tileSet.Attributes["source"] != null) { TileSets.Add(new ExternalTileSetContent(tileSet, context)); } else { TileSets.Add(new TileSetContent(tileSet, context)); } } foreach (XmlNode layerNode in document.SelectNodes("map/layer|map/objectgroup")) { LayerContent layerContent; if (layerNode.Name == "layer") { layerContent = new TileLayerContent(layerNode, context); } else if (layerNode.Name == "objectgroup") { layerContent = new MapObjectLayerContent(layerNode, context); } else { throw new Exception("Unknown layer name: " + layerNode.Name); } // Layer names need to be unique for our lookup system, but Tiled // doesn't require unique names. string layerName = layerContent.Name; int duplicateCount = 2; // if a layer already has the same name... if (Layers.Find(l => l.Name == layerName) != null) { // figure out a layer name that does work do { layerName = string.Format("{0}{1}", layerContent.Name, duplicateCount); duplicateCount++; } while (Layers.Find(l => l.Name == layerName) != null); // log a warning for the user to see context.Logger.LogWarning(string.Empty, new ContentIdentity(), "Renaming layer \"{1}\" to \"{2}\" to make a unique name.", layerContent.Type, layerContent.Name, layerName); // save that name layerContent.Name = layerName; } Layers.Add(layerContent); } } } } I'm lost as to why this is failing. Thoughts? -- EDIT -- After playing with it a bit, I would think it has something to do with referencing the projects. I'm already referencing the TiledLib within my main windows project (TiledTest). However, this doesn't seem to make a difference. I can place the dll generated from the TiledLib project into the debug folder of TiledTest, and this causes it to generate a different error: Error loading "desert". Cannot find ContentTypeReader for Microsoft.Xna.Framework.Content.Pipeline.ExternalReference`1[Microsoft.Xna.Framework.Content.Pipeline.Graphics.Texture2DContent]. at Microsoft.Xna.Framework.Content.ContentTypeReaderManager.GetTypeReader(Type targetType, ContentReader contentReader) at Microsoft.Xna.Framework.Content.ContentTypeReaderManager.GetTypeReader(Type targetType) at Microsoft.Xna.Framework.Content.ReflectiveReaderMemberHelper..ctor(ContentTypeReaderManager manager, FieldInfo fieldInfo, PropertyInfo propertyInfo, Type memberType, Boolean canWrite) at Microsoft.Xna.Framework.Content.ReflectiveReaderMemberHelper.TryCreate(ContentTypeReaderManager manager, Type declaringType, FieldInfo fieldInfo) at Microsoft.Xna.Framework.Content.ReflectiveReader1.Initialize(ContentTypeReaderManager manager) at Microsoft.Xna.Framework.Content.ContentTypeReaderManager.ReadTypeManifest(Int32 typeCount, ContentReader contentReader) at Microsoft.Xna.Framework.Content.ContentReader.ReadHeader() at Microsoft.Xna.Framework.Content.ContentReader.ReadAsset[T]() at Microsoft.Xna.Framework.Content.ContentManager.ReadAsset[T](String assetName, Action1 recordDisposableObject) at Microsoft.Xna.Framework.Content.ContentManager.Load[T](String assetName) at TiledTest.Game1.LoadContent() in C:\My Documents\Dropbox\Visual Studio Projects\TiledTest\TiledTest\TiledTest\Game1.cs:line 51 at Microsoft.Xna.Framework.Game.Initialize() at TiledTest.Game1.Initialize() in C:\My Documents\Dropbox\Visual Studio Projects\TiledTest\TiledTest\TiledTest\Game1.cs:line 39 at Microsoft.Xna.Framework.Game.RunGame(Boolean useBlockingRun) at Microsoft.Xna.Framework.Game.Run() at TiledTest.Program.Main(String[] args) in C:\My Documents\Dropbox\Visual Studio Projects\TiledTest\TiledTest\TiledTest\Program.cs:line 15 This is all incredibly frustrating as the demo doesn't appear to have any special linking properties. The TiledLib I am utilizing is from Nick Gravelyn, and can be found here: https://bitbucket.org/nickgravelyn/tiledlib. The demo it comes with works fine, and yet in recreating I always run into this error.

  Read the article

• CodePlex Daily Summary for Saturday, March 24, 2012

  CodePlex Daily Summary for Saturday, March 24, 2012Popular Releasesmenu4web: menu4web 0.0.3: menu4web 0.0.3Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 14: 1. improved accuracy of logic fault checking in analysisMapWindow 6 Desktop GIS: MapWindow 6.1.1: MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial templateDotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Indiefreaks Game Framework: 0.9.2.0: Feature: Added SunBurn engine v2.0.18.7 support (doesn't support versions below). Feature: Added GammaCorrection Post processor to allow developers or even players to tweak the Gamma of the game depending on their screen (courtesy of bamyazi) Feature: Added Windows, Xbox 360 & WP7 enabled StorageManager (based on Nick Gravelyn's EasyStorage) to read/write files for player or game data. Feature: Added VirtualGamePad feature for WP7 allowing developers to define Touch areas on screen and mapped...Code for Rapid C# Windows Development eBook + LINQPad and Data Tools: LLBLGen LINQPad Data Context Driver Version 2.1: Sixth release of a LLBLGen Pro Typed Data Context Driver for LINQPad. For LLBLGen Pro versions 3.1 and 3.5(coming). New features:When you switch the query language to SQL, LINQPad updates the Schema Explorer to show SQL column names rather than CLR property names Connection dialog unloads assemblies when it has closed down so they are no longer locked - this allows them to be rebuilt while LINQPad is still open Connection dialog includes a button to quickly add assemblies needed for the...People's Note: People's Note 0.40: Version 0.40 adds an option to compact the database from the profile screen. Compacting a database can make it smaller and faster by removing empty spaces left over by editing, moving, and deleting notes. To install: copy the appropriate CAB file onto your WM device and run it.Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Image 3D Viewer: Image 3D Viewer: WPF .Net 3.5 .Net 4 .Net 4.5Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...Speed up Printer migration using PrintBrm and it's configuration files: BRMC.EXE: Run the tool from the extracted directory of the printbrm backup. You can use the following command to extract a backup file to a directory - PRINTBRM.EXE -R -D C:\TEMP\EXPAND -F C:\TEMP\PRINTERBACKUP.PRINTEREXPORTNew ProjectsAsp.NET Url Router: 1.Url rewritting. 2.Provider regex matcher 3.Support custom url validate handler.BC-Web: ch projectCape: Dynamically generates Capistrano recipes for Rake tasks.cstgamebgs: Project for wp7GCalculator: GCalculator for performing basic arithmetic operations. Windows Sidebar Gadget invacc: Invacc- for inventory and Account Onlineirgsh-node: Worker nodes of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-repo: Repository manager node of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-web: Web interface and task manager of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/Kinect Explorer For SharePoint 2010: Kinect Explorer for SharePoint is a tool which provide Natural User Interface to browse through SharePoint sites. Use body gestures to browse, read, move, copy documents. Use Speech services to read-out the files.MCU: mcu devMVC3ShellCode: MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode NetWatch: NetWatch - network watchdog Small application primary designed for network connectivity monitoring. You can configure set of network tests (ping, http, ...) and time plan for this tests. Application is running in windows notification area and notife you each problem. NMortgage: The goal of this project will be to give a prospective home buyer or an existing home owner the insight they need to explore effects of different repayment strategies or different mortgage structures. Nucleo.NET MVP: The Nucleo MVP framework provides a Model-View-Presenter approach that isn't obtrusive, can be utilized in multiple environments, and is versatile. Providing a lot of features you see in other frameworks, the Nucleo MVP framework provides many extensibility points, pretty much allowing you to rewrite most of the framework. It features dynamic injection support, presenter and view initializers (like what you see in ASP.NET MVC), model property injection, attribute- and convention-based vie...P2PShare: This project is to build a new and moden System for p2p file shearing supporting downloads from HTTP, HTTPS, FTP support for P2Pshare client list servers so files can point to a server or a host only file so no servers are used and only p2p is usedPipeLayer: proyecto de sistemas inteligentespython-irgsh: Python library for BlankOn Package Factory - http://irgsh.blankonlinux.or.id/RamGec XNA Controls - Window Elements Library for XNA Solutions: Lightweight, ultra-high performance and flexible library for displaying and managing Window Controls for XNA system. Features its own Window Designer for creating custom windows and controls.RPG Character Generators and Tools: Various tools for pen and paper style role playing games.Screen scraper: A program that can be used to download public domain MP3 and other media such as pdf documents.SharePoint Bdc request library: The given set of classes simplifies an access to the external data, which can be reached through BDC. The library allows to make simple requests for values from external data source, using a BDC Entity Instance Identifier(s) or a value of a certain BDC Entity field. Developed to interact with Business Data Connectivity of SharePoint 2010.testtom03232012git01: testtom03232012git01testtom03232012git02: testtom03232012git02the north star uc: University projectTyphon: Typhon is a role playing simulation management application, much like Nova, but written in MVC/C#.VRE LabTrove-SharePoint connector: The VRE LabTrove-SharePoint Connector provides a means of integrating the ability to view, post to, and edit posts stored in a LabTrove electronic laboratory notebook from within the familiar environment of Microsoft SharePoint. Once installed and configured, these Web Parts give SharePoint users a straightforward way to interact with any LabTrove installation that they wish to use. They also facilitate users to attach data that is stored in a SharePoint Document Library to the LabTrove posts...

  Read the article

• When someone deletes a shared data source in SSRS

  - by Rob Farley

  SQL Server Reporting Services plays nicely. You can have things in the catalogue that get shared. You can have Reports that have Links, Datasets that can be used across different reports, and Data Sources that can be used in a variety of ways too. So if you find that someone has deleted a shared data source, you potentially have a bit of a horror story going on. And this works for this month’s T-SQL Tuesday theme, hosted by Nick Haslam, who wants to hear about horror stories. I don’t write about LobsterPot client horror stories, so I’m writing about a situation that a fellow MVP friend asked me about recently instead. The best thing to do is to grab a recent backup of the ReportServer database, restore it somewhere, and figure out what’s changed. But of course, this isn’t always possible. And it’s much nicer to help someone with this kind of thing, rather than to be trying to fix it yourself when you’ve just deleted the wrong data source. Unfortunately, it lets you delete data sources, without trying to scream that the data source is shared across over 400 reports in over 100 folders, as was the case for my friend’s colleague. So, suddenly there’s a big problem – lots of reports are failing, and the time to turn it around is small. You probably know which data source has been deleted, but getting the shared data source back isn’t the hard part (that’s just a connection string really). The nasty bit is all the re-mapping, to get those 400 reports working again. I know from exploring this kind of stuff in the past that the ReportServer database (using its default name) has a table called dbo.Catalog to represent the catalogue, and that Reports are stored here. However, the information about what data sources these deployed reports are configured to use is stored in a different table, dbo.DataSource. You could be forgiven for thinking that shared data sources would live in this table, but they don’t – they’re catalogue items just like the reports. Let’s have a look at the structure of these two tables (although if you’re reading this because you have a disaster, feel free to skim past). Frustratingly, there doesn’t seem to be a Books Online page for this information, sorry about that. I’m also not going to look at all the columns, just ones that I find interesting enough to mention, and that are related to the problem at hand. These fields are consistent all the way through to SQL Server 2012 – there doesn’t seem to have been any changes here for quite a while. dbo.Catalog The Primary Key is ItemID. It’s a uniqueidentifier. I’m not going to comment any more on that. A minor nice point about using GUIDs in unfamiliar databases is that you can more easily figure out what’s what. But foreign keys are for that too… Path, Name and ParentID tell you where in the folder structure the item lives. Path isn’t actually required – you could’ve done recursive queries to get there. But as that would be quite painful, I’m more than happy for the Path column to be there. Path contains the Name as well, incidentally. Type tells you what kind of item it is. Some examples are 1 for a folder and 2 a report. 4 is linked reports, 5 is a data source, 6 is a report model. I forget the others for now (but feel free to put a comment giving the full list if you know it). Content is an image field, remembering that image doesn’t necessarily store images – these days we’d rather use varbinary(max), but even in SQL Server 2012, this field is still image. It stores the actual item definition in binary form, whether it’s actually an image, a report, whatever. LinkSourceID is used for Linked Reports, and has a self-referencing foreign key (allowing NULL, of course) back to ItemID. Parameter is an ntext field containing XML for the parameters of the report. Not sure why this couldn’t be a separate table, but I guess that’s just the way it goes. This field gets changed when the default parameters get changed in Report Manager. There is nothing in dbo.Catalog that describes the actual data sources that the report uses. The default data sources would be part of the Content field, as they are defined in the RDL, but when you deploy reports, you typically choose to NOT replace the data sources. Anyway, they’re not in this table. Maybe it was already considered a bit wide to throw in another ntext field, I’m not sure. They’re in dbo.DataSource instead. dbo.DataSource The Primary key is DSID. Yes it’s a uniqueidentifier... ItemID is a foreign key reference back to dbo.Catalog Fields such as ConnectionString, Prompt, UserName and Password do what they say on the tin, storing information about how to connect to the particular source in question. Link is a uniqueidentifier, which refers back to dbo.Catalog. This is used when a data source within a report refers back to a shared data source, rather than embedding the connection information itself. You’d think this should be enforced by foreign key, but it’s not. It does allow NULLs though. Flags this is an int, and I’ll come back to this. When a Data Source gets deleted out of dbo.Catalog, you might assume that it would be disallowed if there are references to it from dbo.DataSource. Well, you’d be wrong. And not because of the lack of a foreign key either. Deleting anything from the catalogue is done by calling a stored procedure called dbo.DeleteObject. You can look at the definition in there – it feels very much like the kind of Delete stored procedures that many people write, the kind of thing that means they don’t need to worry about allowing cascading deletes with foreign keys – because the stored procedure does the lot. Except that it doesn’t quite do that. If it deleted everything on a cascading delete, we’d’ve lost all the data sources as configured in dbo.DataSource, and that would be bad. This is fine if the ItemID from dbo.DataSource hooks in – if the report is being deleted. But if a shared data source is being deleted, you don’t want to lose the existence of the data source from the report. So it sets it to NULL, and it marks it as invalid. We see this code in that stored procedure. UPDATE [DataSource]    SET       [Flags] = [Flags] & 0x7FFFFFFD, -- broken link       [Link] = NULL FROM    [Catalog] AS C    INNER JOIN [DataSource] AS DS ON C.[ItemID] = DS.[Link] WHERE    (C.Path = @Path OR C.Path LIKE @Prefix ESCAPE '*') Unfortunately there’s no semi-colon on the end (but I’d rather they fix the ntext and image types first), and don’t get me started about using the table name in the UPDATE clause (it should use the alias DS). But there is a nice comment about what’s going on with the Flags field. What I’d LIKE it to do would be to set the connection information to a report-embedded copy of the connection information that’s in the shared data source, the one that’s about to be deleted. I understand that this would cause someone to lose the benefit of having the data sources configured in a central point, but I’d say that’s probably still slightly better than LOSING THE INFORMATION COMPLETELY. Sorry, rant over. I should log a Connect item – I’ll put that on my todo list. So it sets the Link field to NULL, and marks the Flags to tell you they’re broken. So this is your clue to fixing it. A bitwise AND with 0x7FFFFFFD is basically stripping out the ‘2’ bit from a number. So numbers like 2, 3, 6, 7, 10, 11, etc, whose binary representation ends in either 11 or 10 get turned into 0, 1, 4, 5, 8, 9, etc. We can test for it using a WHERE clause that matches the SET clause we’ve just used. I’d also recommend checking for Link being NULL and also having no ConnectionString. And join back to dbo.Catalog to get the path (including the name) of broken reports are – in case you get a surprise from a different data source being broken in the past. SELECT c.Path, ds.Name FROM dbo.[DataSource] AS ds JOIN dbo.[Catalog] AS c ON c.ItemID = ds.ItemID WHERE ds.[Flags] = ds.[Flags] & 0x7FFFFFFD AND ds.[Link] IS NULL AND ds.[ConnectionString] IS NULL; When I just ran this on my own machine, having deleted a data source to check my code, I noticed a Report Model in the list as well – so if you had thought it was just going to be reports that were broken, you’d be forgetting something. So to fix those reports, get your new data source created in the catalogue, and then find its ItemID by querying Catalog, using Path and Name to find it. And then use this value to fix them up. To fix the Flags field, just add 2. I prefer to use bitwise OR which should do the same. Use the OUTPUT clause to get a copy of the DSIDs of the ones you’re changing, just in case you need to revert something later after testing (doing it all in a transaction won’t help, because you’ll just lock out the table, stopping you from testing anything). UPDATE ds SET [Flags] = [Flags] | 2, [Link] = '3AE31CBA-BDB4-4FD1-94F4-580B7FAB939D' /*Insert your own GUID*/ OUTPUT deleted.Name, deleted.DSID, deleted.ItemID, deleted.Flags FROM dbo.[DataSource] AS ds JOIN dbo.[Catalog] AS c ON c.ItemID = ds.ItemID WHERE ds.[Flags] = ds.[Flags] & 0x7FFFFFFD AND ds.[Link] IS NULL AND ds.[ConnectionString] IS NULL; But please be careful. Your mileage may vary. And there’s no reason why 400-odd broken reports needs to be quite the nightmare that it could be. Really, it should be less than five minutes. @rob_farley

  Read the article

• Facebook graph api photo upload to a fan page album

  - by kielie

  Hi guys, I have gotten the photo upload function to work with this code, <?php include_once 'facebook-php-sdk/src/facebook.php'; include_once 'config.php';//this file contains the secret key and app id etc... $facebook = new Facebook(array( 'appId' => FACEBOOK_APP_ID, 'secret' => FACEBOOK_SECRET_KEY, 'cookie' => true, 'domain' => 'your callback url goes here' )); $session = $facebook->getSession(); if (!$session) { $url = $facebook->getLoginUrl(array( 'canvas' => 1, 'fbconnect' => 0, 'req_perms'=>'user_photos,publish_stream,offline_access'//here I am requesting the required permissions, it should work with publish_stream alone, but I added the others just to be safe )); echo 'You are not logged in, please <a href="' . $facebook->getLoginUrl() . '">Login</a> to access this application'; } else{ try { $uid = $facebook->getUser(); $me = $facebook->api('/me'); $token = $session['access_token'];//here I get the token from the $session array $album_id = 'the id of the album you wish to upload to eg: 1122'; //upload your photo $file= 'test.jpg'; $args = array( 'message' => 'Photo from application', ); $args[basename($file)] = '@' . realpath($file); $ch = curl_init(); $url = 'https://graph.facebook.com/'.$album_id.'/photos?access_token='.$token; curl_setopt($ch, CURLOPT_URL, $url); curl_setopt($ch, CURLOPT_HEADER, false); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); curl_setopt($ch, CURLOPT_POST, true); curl_setopt($ch, CURLOPT_POSTFIELDS, $args); $data = curl_exec($ch); //returns the id of the photo you just uploaded print_r(json_decode($data,true)); } catch(FacebookApiException $e){ echo "Error:" . print_r($e, true); } } ?> I hope this helps, a friend and I smashed our heads against a wall for quite some time to get this working! Anyways, here is my question, how can I upload a image to a fan page? I am struggling to get this working, when I upload the image all I get is the photo id but no photo in the album. So basically, when the user clicks the upload button on our application, I need it to upload the image they created to our fan page's album with them tagged on it. Anyone know how I can accomplish this?

  Read the article

• iPhone 3DES encryption key length issue

  - by Russell Hill

  Hi, I have been banging my head on a wall with this one. I need to code my iPhone application to encrypt a 4 digit "pin" using 3DES in ECB mode for transmission to a webservice which I believe is written in .NET. + (NSData *)TripleDESEncryptWithKey:(NSString *)key dataToEncrypt:(NSData*)encryptData { NSLog(@"kCCKeySize3DES=%d", kCCKeySize3DES); char keyBuffer[kCCKeySize3DES+1]; // room for terminator (unused) bzero( keyBuffer, sizeof(keyBuffer) ); // fill with zeroes (for padding) [key getCString: keyBuffer maxLength: sizeof(keyBuffer) encoding: NSUTF8StringEncoding]; // encrypts in-place, since this is a mutable data object size_t numBytesEncrypted = 0; size_t returnLength = ([encryptData length] + kCCBlockSize3DES) & ~(kCCBlockSize3DES - 1); // NSMutableData* returnBuffer = [NSMutableData dataWithLength:returnLength]; char* returnBuffer = malloc(returnLength * sizeof(uint8_t) ); CCCryptorStatus ccStatus = CCCrypt(kCCEncrypt, kCCAlgorithm3DES , kCCOptionECBMode, keyBuffer, kCCKeySize3DES, nil, [encryptData bytes], [encryptData length], returnBuffer, returnLength, &numBytesEncrypted); if (ccStatus == kCCParamError) NSLog(@"PARAM ERROR"); else if (ccStatus == kCCBufferTooSmall) NSLog(@"BUFFER TOO SMALL"); else if (ccStatus == kCCMemoryFailure) NSLog(@"MEMORY FAILURE"); else if (ccStatus == kCCAlignmentError) NSLog(@"ALIGNMENT"); else if (ccStatus == kCCDecodeError) NSLog(@"DECODE ERROR"); else if (ccStatus == kCCUnimplemented) NSLog(@"UNIMPLEMENTED"); if(ccStatus == kCCSuccess) { NSLog(@"TripleDESEncryptWithKey encrypted: %@", [NSData dataWithBytes:returnBuffer length:numBytesEncrypted]); return [NSData dataWithBytes:returnBuffer length:numBytesEncrypted]; } else return nil; } } I do get a value encrypted using the above code, however it does not match the value from the .NET web service. I believe the issue is that the encryption key I have been supplied by the web service developers is 48 characters long. I see that the iPhone SDK constant "kCCKeySize3DES" is 24. So I SUSPECT, but don't know, that the commoncrypto API call is only using the first 24 characters of the supplied key. Is this correct? Is there ANY way I can get this to generate the correct encrypted pin? I have output the data bytes from the encryption PRIOR to base64 encoding it and have attempted to match this against those generated from the .NET code (with the help of a .NET developer who sent the byte array output to me). Neither the non-base64 encoded byte array nor the final base64 encoded strings match.

  Read the article

• What is required to use LODSB in assembly?

  - by Harvey

  What is the minimum set of steps required to use LODSB to load a relative address to a string in my code? I have the following test program that I'm using PXE to boot. I boot it two ways: via pxelinux.0 and directly. If I boot it directly, my program prints both strings. If I boot via pxelinux.0, it only prints the first string. Why? Working technique (for both): Set the direction flag to increment, cld Set ds to cs Put the address (from start) of string in si Add the starting offset to si Non-working technique (just for pxelinux): Calculate a new segment address based on (((cs << 4) + offset) >> 4) Set ds to that. (either A000 or 07C0) text here to fix bug in markdown // Note: If you try this code, don't forget to set // the "#if 0" below appropriately! .text .globl start, _start start: _start: _start1: .code16 jmp real_start . = _start1 + 0x1fe .byte 0x55, 0xAA // Next sector . = _start1 + 0x200 jmp real_start test1_str: .asciz "\r\nTest: 9020:fe00" test2_str: .asciz "\r\nTest: a000:0000" real_start: cld // Make sure %si gets incremented. #if 0 // When loaded by pxelinux, we're here: // 9020:fe00 ==> a000:0000 // This works. movw $0x9020, %bx movw %bx, %ds movw $(test1_str - _start1), %si addw $0xfe00, %si call print_message // This does not. movw $0xA000, %bx movw %bx, %ds movw $(test2_str - _start1), %si call print_message #else // If we are loaded directly without pxelinux, we're here: // 0000:7c00 ==> 07c0:0000 // This works. movw $0x0000, %bx movw %bx, %ds movw $(test1_str - _start1), %si addw $0x7c00, %si call print_message // This does, too. movw $0x07c0, %bx movw %bx, %ds movw $(test2_str - _start1), %si call print_message #endif // Hang the computer sti 1: jmp 1b // Prints string DS:SI (modifies AX BX SI) print_message: pushw %ax jmp 2f 3: movb $0x0e, %ah /* print char in AL */ int $0x10 /* via TTY mode */ 2: lodsb (%si), %al /* get token */ cmpb $0, %al /* end of string? */ jne 3b popw %ax ret .balign 0x200 Here's the compilation: /usr/bin/ccache gcc -Os -fno-stack-protector -fno-builtin -nostdinc -DSUPPORT_SERIAL=1 -DSUPPORT_HERCULES=1 -DSUPPORT_GRAPHICS=1 -DHAVE_CONFIG_H -I. -Wall -ggdb3 -Wmissing-prototypes -Wunused -Wshadow -Wpointer-arith -falign-jumps=1 -falign-loops=1 -falign-functions=1 -Wundef -g -c -o ds_teststart_exec-ds_teststart.o ds_test.S /usr/bin/ccache gcc -g -o ds_teststart.exec -nostdlib -Wl,-N -Wl,-Ttext -Wl,8000 ds_teststart_exec-ds_teststart.o objcopy -O binary ds_teststart.exec ds_teststart

  Read the article

• Yesterday's broken codebase hunt me back

  - by sandun dhammika

  I need a fun oky. I just love this openmoko hardware and hacking into it. Please could somebody help me to compile qemu.I 'm so sad and I want to compile qemu and it required the GCC3.x and then I downloaded gcc 3.2 but when I configure it and build it, it gives a very sad error message. G_FOR_TARGET=" "SHELL=/bin/sh" "EXPECT=expect" "RUNTEST=runtest" "RUNTESTFLAGS=" "exec_prefix=/gcc-3.2" "infodir=/gcc-3.2/info" "libdir=/gcc-3.2/lib" "prefix=/gcc-3.2" "tooldir=/gcc-3.2/i686-pc-linux-gnu" "AR=ar" "AS=as" "CC=gcc" "CXX=c++" "LD=ld" "LIBCFLAGS=-g -O2" "NM=nm" "PICFLAG=" "RANLIB=ranlib" "DESTDIR=" DO=all multi-do make[1]: Leaving directory `/gcc-3.2/gcc-3.2/zlib' make[1]: Entering directory `/gcc-3.2/gcc-3.2/fastjar' make[1]: Leaving directory `/gcc-3.2/gcc-3.2/fastjar' make[1]: Entering directory `/gcc-3.2/gcc-3.2/gcc' gcc -c -DIN_GCC -g -O2 -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wtraditional -pedantic -Wno-long-long -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -I. -I. -I./. -I./config -I./../include ./read-rtl.c -o read-rtl.o In file included from ./read-rtl.c:24:0: ./rtl.h:125:3: warning: type of bit-field ‘code’ is a GCC extension ./rtl.h:128:3: warning: type of bit-field ‘mode’ is a GCC extension ./read-rtl.c: In function ‘fatal_with_file_and_line’: ./read-rtl.c:61:1: warning: traditional C rejects ISO C style function definitions ./read-rtl.c: In function ‘read_rtx’: ./read-rtl.c:662:8: error: lvalue required as increment operand make[1]: *** [read-rtl.o] Error 1 make[1]: Leaving directory `/gcc-3.2/gcc-3.2/gcc' make: *** [all-gcc] Error 2 This is so sad and this is sooo bad. I have searched patches and workaround all over the Internet to this,but I couldn't find any alternative for this. I'm out of my patience now. I want that virtual machine ready and I want to make a debug host cos I don't have some money to buy original neo 1937 hardware. The patch that I have found comes with a nasty error too. I'm so sick of it.Any idea how could I fix this problem and make this work? Please please I'm begging you somebody help me please. Thanks all.

  Read the article

• sqlite3-ruby can't make on rvm 1.8.7

  - by Josh Crews

  Upgrading to Rails 3 by starting with RVM 1.8.7. OSX 10.5.8 Output: josh-crewss-macbook:~ joshcrews$ gem install sqlite3-rubyBuilding native extensions. This could take a while...ERROR: Error installing sqlite3-ruby: ERROR: Failed to build gem native extension. /Users/joshcrews/.rvm/rubies/ruby-1.8.7-p174/bin/ruby extconf.rb checking for sqlite3.h... yes checking for sqlite3_libversion_number() in -lsqlite3... yes checking for rb_proc_arity()... no checking for sqlite3_column_database_name()... no checking for sqlite3_enable_load_extension()... no checking for sqlite3_load_extension()... no creating Makefile make gcc -I. -I. -I/Users/joshcrews/.rvm/rubies/ruby-1.8.7-p174/lib/ruby/1.8/i686-darwin9.8.0 -I. -I/usr/local/include -I/opt/local/include -I/usr/include -D_XOPEN_SOURCE -D_DARWIN_C_SOURCE -fno-common -g -O2 -fno-common -pipe -fno-common -O3 -Wall -Wcast-qual -Wwrite-strings -Wconversion -Wmissing-noreturn -Winline -c database.c database.c: In function ‘deallocate’: database.c:17: warning: implicit declaration of function ‘sqlite3_next_stmt’ database.c:17: warning: assignment makes pointer from integer without a cast database.c: In function ‘initialize’: database.c:76: warning: implicit declaration of function ‘sqlite3_open_v2’ database.c:79: error: ‘SQLITE_OPEN_READWRITE’ undeclared (first use in this function) database.c:79: error: (Each undeclared identifier is reported only once database.c:79: error: for each function it appears in.) database.c:79: error: ‘SQLITE_OPEN_CREATE’ undeclared (first use in this function) database.c: In function ‘set_sqlite3_func_result’: database.c:277: error: ‘sqlite3_int64’ undeclared (first use in this function) database.c: In function ‘rb_sqlite3_func’: database.c:311: warning: passing argument 1 of ‘ruby_xcalloc’ as signed due to prototype database.c: In function ‘rb_sqlite3_step’: database.c:378: warning: passing argument 1 of ‘ruby_xcalloc’ as signed due to prototype make: *** [database.o] Error 1 Gem list (these are under RVM, under system I've got lot more gems included the sqlite3-ruby that's worked for 1.5 years) josh-crewss-macbook:~ joshcrews$ gem list *** LOCAL GEMS *** abstract (1.0.0) actionmailer (3.0.0.beta3) actionpack (3.0.0.beta3) activemodel (3.0.0.beta3) activerecord (3.0.0.beta3) activeresource (3.0.0.beta3) activesupport (3.0.0.beta3, 2.3.8) arel (0.3.3) builder (2.1.2) bundler (0.9.25) capybara (0.3.8) configuration (1.1.0) cucumber (0.7.2) cucumber-rails (0.3.1) culerity (0.2.10) database_cleaner (0.5.2) diff-lcs (1.1.2) erubis (2.6.5) ffi (0.6.3) gherkin (1.0.30) i18n (0.4.0, 0.3.7) json_pure (1.4.3) launchy (0.3.5) mail (2.2.1) memcache-client (1.8.3) mime-types (1.16) nokogiri (1.4.2) polyglot (0.3.1) rack (1.1.0) rack-mount (0.6.3) rack-test (0.5.4) rails (3.0.0.beta3) railties (3.0.0.beta3) rake (0.8.7) rdoc (2.5.8) rspec (2.0.0.beta.10, 2.0.0.beta.8) rspec-core (2.0.0.beta.10, 2.0.0.beta.8) rspec-expectations (2.0.0.beta.10, 2.0.0.beta.8) rspec-mocks (2.0.0.beta.10, 2.0.0.beta.8) rspec-rails (2.0.0.beta.10, 2.0.0.beta.8) rubygems-update (1.3.7) selenium-webdriver (0.0.20) spork (0.8.3) term-ansicolor (1.0.5) text-format (1.0.0) text-hyphen (1.0.0) thor (0.13.6) treetop (1.4.8) trollop (1.16.2) tzinfo (0.3.22) webrat (0.7.1) Version of XCode: 3.1.1 My suspicion is it has to do with "-I/Users/joshcrews/.rvm/rubies/ruby-1.8.7-p174/lib/ruby/1.8/i686-darwin9.8.0", because i686-darwin9.8.0 doesnt exist in that file

  Read the article

• How to fix these compiler errors?

  - by Sandra Schlichting

  I have this source code from 2001 that I would like to compile. It gives this: $ make g++ -O99 -Wall -DLINUX -pedantic -c -o audio.o audio.cpp In file included from audio.cpp:7: audio.h:14: error: use of enum ‘mad_flow’ without previous declaration audio.h:15: error: use of enum ‘mad_flow’ without previous declaration audio.h:17: error: use of enum ‘mad_flow’ without previous declaration audio.cpp: In function ‘mad_flow audio::input(void*, mad_stream*)’: audio.cpp:19: error: new declaration ‘mad_flow audio::input(void*, mad_stream*)’ audio.h:14: error: ambiguates old declaration ‘int audio::input(void*, mad_stream*)’ audio.h:11: error: ‘size_t audio::stream::BufferPos’ is private audio.cpp:23: error: within this context audio.h:11: error: ‘size_t audio::stream::BufferSize’ is private audio.cpp:23: error: within this context audio.h:10: error: ‘char* audio::stream::Buffer’ is private audio.cpp:26: error: within this context audio.h:11: error: ‘size_t audio::stream::BufferSize’ is private audio.cpp:26: error: within this context audio.h:11: error: ‘size_t audio::stream::BufferPos’ is private audio.cpp:27: error: within this context audio.h:11: error: ‘size_t audio::stream::BufferSize’ is private audio.cpp:27: error: within this context audio.cpp: In function ‘mad_flow audio::output(void*, const mad_header*, mad_pcm*)’: audio.cpp:49: error: new declaration ‘mad_flow audio::output(void*, const mad_header*, mad_pcm*)’ audio.h:15: error: ambiguates old declaration ‘int audio::output(void*, const mad_header*, mad_pcm*)’ audio.cpp: In function ‘mad_flow audio::error(void*, mad_stream*, mad_frame*)’: audio.cpp:83: error: new declaration ‘mad_flow audio::error(void*, mad_stream*, mad_frame*)’ audio.h:17: error: ambiguates old declaration ‘int audio::error(void*, mad_stream*, mad_frame*)’ audio.cpp: In constructor ‘audio::stream::stream(const char*)’: audio.cpp:119: error: ‘input’ was not declared in this scope audio.cpp:122: error: ‘output’ was not declared in this scope audio.cpp:123: error: ‘error’ was not declared in this scope make: *** [audio.o] Error 1 audio.h contains #include <stdlib.h> #include "mad.h" namespace audio { class stream { private: char* Buffer; size_t BufferSize, BufferPos; struct mad_decoder Decoder; friend enum mad_flow input(void* Data, struct mad_stream* MadStream); friend enum mad_flow output(void* Data, const struct mad_header* Header, struct mad_pcm* PCM); friend enum mad_flow error(void* Data, struct mad_stream* MadStream, struct mad_frame* Frame); public: stream(const char* FileName); ~stream(); void play(); }; } I have tried to just insert enum mad_flow {}; but that just gave a new problem. Can anyone see how to fix this?

  Read the article

• How to write a buffer-overflow exploit in windows XP,x86?

  - by Mask

  void function(int a, int b, int c) { char buffer1[5]; char buffer2[10]; int *ret; ret = buffer1 + 12; (*ret) += 8;//why is it 8?? } void main() { int x; x = 0; function(1,2,3); x = 1; printf("%d\n",x); } The above demo is from here: http://insecure.org/stf/smashstack.html But it's not working here: D:\test>gcc -Wall -Wextra hw.cpp && a.exe hw.cpp: In function `void function(int, int, int)': hw.cpp:6: warning: unused variable 'buffer2' hw.cpp: At global scope: hw.cpp:4: warning: unused parameter 'a' hw.cpp:4: warning: unused parameter 'b' hw.cpp:4: warning: unused parameter 'c' 1 And I don't understand why it's 8 though the author thinks: A little math tells us the distance is 8 bytes. My gdb dump as called: Dump of assembler code for function main: 0x004012ee <main+0>: push %ebp 0x004012ef <main+1>: mov %esp,%ebp 0x004012f1 <main+3>: sub $0x18,%esp 0x004012f4 <main+6>: and $0xfffffff0,%esp 0x004012f7 <main+9>: mov $0x0,%eax 0x004012fc <main+14>: add $0xf,%eax 0x004012ff <main+17>: add $0xf,%eax 0x00401302 <main+20>: shr $0x4,%eax 0x00401305 <main+23>: shl $0x4,%eax 0x00401308 <main+26>: mov %eax,0xfffffff8(%ebp) 0x0040130b <main+29>: mov 0xfffffff8(%ebp),%eax 0x0040130e <main+32>: call 0x401b00 <_alloca> 0x00401313 <main+37>: call 0x4017b0 <__main> 0x00401318 <main+42>: movl $0x0,0xfffffffc(%ebp) 0x0040131f <main+49>: movl $0x3,0x8(%esp) 0x00401327 <main+57>: movl $0x2,0x4(%esp) 0x0040132f <main+65>: movl $0x1,(%esp) 0x00401336 <main+72>: call 0x4012d0 <function> 0x0040133b <main+77>: movl $0x1,0xfffffffc(%ebp) 0x00401342 <main+84>: mov 0xfffffffc(%ebp),%eax 0x00401345 <main+87>: mov %eax,0x4(%esp) 0x00401349 <main+91>: movl $0x403000,(%esp) 0x00401350 <main+98>: call 0x401b60 <printf> 0x00401355 <main+103>: leave 0x00401356 <main+104>: ret 0x00401357 <main+105>: nop 0x00401358 <main+106>: add %al,(%eax) 0x0040135a <main+108>: add %al,(%eax) 0x0040135c <main+110>: add %al,(%eax) 0x0040135e <main+112>: add %al,(%eax) End of assembler dump. Dump of assembler code for function function: 0x004012d0 <function+0>: push %ebp 0x004012d1 <function+1>: mov %esp,%ebp 0x004012d3 <function+3>: sub $0x38,%esp 0x004012d6 <function+6>: lea 0xffffffe8(%ebp),%eax 0x004012d9 <function+9>: add $0xc,%eax 0x004012dc <function+12>: mov %eax,0xffffffd4(%ebp) 0x004012df <function+15>: mov 0xffffffd4(%ebp),%edx 0x004012e2 <function+18>: mov 0xffffffd4(%ebp),%eax 0x004012e5 <function+21>: movzbl (%eax),%eax 0x004012e8 <function+24>: add $0x5,%al 0x004012ea <function+26>: mov %al,(%edx) 0x004012ec <function+28>: leave 0x004012ed <function+29>: ret In my case the distance should be - = 5,right?But it seems not working..

  Read the article

• How to write a buffer-overflow exploit in GCC,windows XP,x86?

  - by Mask

  void function(int a, int b, int c) { char buffer1[5]; char buffer2[10]; int *ret; ret = buffer1 + 12; (*ret) += 8;//why is it 8?? } void main() { int x; x = 0; function(1,2,3); x = 1; printf("%d\n",x); } The above demo is from here: http://insecure.org/stf/smashstack.html But it's not working here: D:\test>gcc -Wall -Wextra hw.cpp && a.exe hw.cpp: In function `void function(int, int, int)': hw.cpp:6: warning: unused variable 'buffer2' hw.cpp: At global scope: hw.cpp:4: warning: unused parameter 'a' hw.cpp:4: warning: unused parameter 'b' hw.cpp:4: warning: unused parameter 'c' 1 And I don't understand why it's 8 though the author thinks: A little math tells us the distance is 8 bytes. My gdb dump as called: Dump of assembler code for function main: 0x004012ee <main+0>: push %ebp 0x004012ef <main+1>: mov %esp,%ebp 0x004012f1 <main+3>: sub $0x18,%esp 0x004012f4 <main+6>: and $0xfffffff0,%esp 0x004012f7 <main+9>: mov $0x0,%eax 0x004012fc <main+14>: add $0xf,%eax 0x004012ff <main+17>: add $0xf,%eax 0x00401302 <main+20>: shr $0x4,%eax 0x00401305 <main+23>: shl $0x4,%eax 0x00401308 <main+26>: mov %eax,0xfffffff8(%ebp) 0x0040130b <main+29>: mov 0xfffffff8(%ebp),%eax 0x0040130e <main+32>: call 0x401b00 <_alloca> 0x00401313 <main+37>: call 0x4017b0 <__main> 0x00401318 <main+42>: movl $0x0,0xfffffffc(%ebp) 0x0040131f <main+49>: movl $0x3,0x8(%esp) 0x00401327 <main+57>: movl $0x2,0x4(%esp) 0x0040132f <main+65>: movl $0x1,(%esp) 0x00401336 <main+72>: call 0x4012d0 <function> 0x0040133b <main+77>: movl $0x1,0xfffffffc(%ebp) 0x00401342 <main+84>: mov 0xfffffffc(%ebp),%eax 0x00401345 <main+87>: mov %eax,0x4(%esp) 0x00401349 <main+91>: movl $0x403000,(%esp) 0x00401350 <main+98>: call 0x401b60 <printf> 0x00401355 <main+103>: leave 0x00401356 <main+104>: ret 0x00401357 <main+105>: nop 0x00401358 <main+106>: add %al,(%eax) 0x0040135a <main+108>: add %al,(%eax) 0x0040135c <main+110>: add %al,(%eax) 0x0040135e <main+112>: add %al,(%eax) End of assembler dump. Dump of assembler code for function function: 0x004012d0 <function+0>: push %ebp 0x004012d1 <function+1>: mov %esp,%ebp 0x004012d3 <function+3>: sub $0x38,%esp 0x004012d6 <function+6>: lea 0xffffffe8(%ebp),%eax 0x004012d9 <function+9>: add $0xc,%eax 0x004012dc <function+12>: mov %eax,0xffffffd4(%ebp) 0x004012df <function+15>: mov 0xffffffd4(%ebp),%edx 0x004012e2 <function+18>: mov 0xffffffd4(%ebp),%eax 0x004012e5 <function+21>: movzbl (%eax),%eax 0x004012e8 <function+24>: add $0x5,%al 0x004012ea <function+26>: mov %al,(%edx) 0x004012ec <function+28>: leave 0x004012ed <function+29>: ret In my case the distance should be - = 5,right?But it seems not working.. Why function needs 56 bytes for local variables?( sub $0x38,%esp )

  Read the article

• Using sem_t in a Qt Project

  - by thauburger

  Hi everyone, I'm working on a simulation in Qt (C++), and would like to make use of a Semaphore wrapper class I made for the sem_t type. Although I am including semaphore.h in my wrapper class, running qmake provides the following error: 'sem_t does not name a type' I believe this is a library/linking error, since I can compile the class without problems from the command line. I've read that you can specify external libraries to include during compilation. However, I'm a) not sure how to do this in the project file, and b) not sure which library to include in order to access semaphore.h. Any help would be greatly appreciated. Thanks, Tom Here's the wrapper class for reference: Semaphore.h #ifndef SEMAPHORE_H #define SEMAPHORE_H #include <semaphore.h> class Semaphore { public: Semaphore(int initialValue = 1); int getValue(); void wait(); void post(); private: sem_t mSemaphore; }; #endif Semaphore.cpp #include "Semaphore.h" Semaphore::Semaphore(int initialValue) { sem_init(&mSemaphore, 0, initialValue); } int Semaphore::getValue() { int value; sem_getvalue(&mSemaphore, &value); return value; } void Semaphore::wait() { sem_wait(&mSemaphore); } void Semaphore::post() { sem_post(&mSemaphore); } And, the QT Project File: TARGET = RestaurantSimulation TEMPLATE = app QT += SOURCES += main.cpp \ RestaurantGUI.cpp \ RestaurantSetup.cpp \ WidgetManager.cpp \ RestaurantView.cpp \ Table.cpp \ GUIFood.cpp \ GUIItem.cpp \ GUICustomer.cpp \ GUIWaiter.cpp \ Semaphore.cpp HEADERS += RestaurantGUI.h \ RestaurantSetup.h \ WidgetManager.h \ RestaurantView.h \ Table.h \ GUIFood.h \ GUIItem.h \ GUICustomer.h \ GUIWaiter.h \ Semaphore.h FORMS += RestaurantSetup.ui LIBS += Full Compiler Output: g++ -c -pipe -g -gdwarf-2 -arch i386 -Wall -W -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED - I/usr/local/Qt4.6/mkspecs/macx-g++ -I. - I/Library/Frameworks/QtCore.framework/Versions/4/Headers -I/usr/include/QtCore - I/Library/Frameworks/QtGui.framework/Versions/4/Headers -I/usr/include/QtGui - I/usr/include -I. -I. -F/Library/Frameworks -o main.o main.cpp In file included from RestaurantGUI.h:10, from main.cpp:2: Semaphore.h:14: error: 'sem_t' does not name a type make: *** [main.o] Error 1 make: Leaving directory `/Users/thauburger/Desktop/RestaurantSimulation' Exited with code 2. Error while building project RestaurantSimulation When executing build step 'Make'

  Read the article

• mysql error using Rails-- Please help

  - by Cypher

  Alright I am sry for the noob question but this has been driving me up a wall-especially because I got it to work yesterday and I can't remember what I did.... I am just trying to use mysql with rails with a mongrel server. I set up the server fine and can run rails applications that don't need mysql but when I create a project using (for example) rails -d mysql blog and then create some simple controller e.g. ruby script/generate Test then put this code in the controller... class TestController < ApplicationController def index render :text => 'WORK' end end then when I start the server up and open up localhost:3000/test I get the following error: = Booting Mongrel = Rails 2.3.5 application starting on http://0.0.0.0:3000 = Call with -d to detach = Ctrl-C to shutdown server /!\ FAILSAFE /!\ Mon May 10 20:15:06 -0500 2010 Status: 500 Internal Server Error Can't connect to MySQL server on 'localhost' (10061) C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/mysql_adapter.rb:589:in 'real_connect' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/mysql_adapter.rb:589:in 'connect' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/mysql_adapter.rb:203:in 'initialize' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/mysql_adapter.rb:75:in 'new' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/mysql_adapter.rb:75:in 'mysql_connection' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/abstract/connection_pool.rb:223:in 'send' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/abstract/connection_pool.rb:223:in 'new_connection' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/abstract/connection_pool.rb:245:in 'checkout_new_connection' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/abstract/connection_pool.rb:188:in 'checkout' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/abstract/connection_pool.rb:184:in 'loop' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/abstract/connection_pool.rb:184:in 'checkout' C:/Ruby/lib/ruby/1.8/monitor.rb:242:in 'synchronize' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/abstract/connection_pool.rb:183:in 'checkout' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/abstract/connection_pool.rb:98:in 'connection' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/abstract/connection_pool.rb:326:in 'retrieve_connection' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/abstract/connection_specification.rb:123:in 'retrieve_connection' C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapter s/abstract/connection_specification.rb:115:in 'connection' etc... In the browser i get a 'We're sorry, but something went wrong' Does anyone know what I am doing wrong?

  Read the article

• Installing PyGraphViz on Windows, Python 2.7

  - by user574043

  I can't install pygraphviz on Windows XP. I'm using Python27. Before to launch the setup I've changet these two variables of the setup.py file library_path="C:\\Archivos de programa\\Graphviz 2.28\\bin" include_path="C:\\Archivos de programa\\Graphviz 2.28\\include\\graphviz" Then I've launched the setup. I'm using mingw32 as a compiler. I don't know what can I do now. I'm using the following command: C:\Python27\pygraphviz-1.1>c:\python27\python setup.py build -c mingw32 And I've got the folling result library_path=C:\Archivos de programa\Graphviz 2.28\bin include_path=C:\Archivos de programa\Graphviz 2.28\include\graphviz running build running build_py running build_ext building 'pygraphviz._graphviz' extension C:\MinGW\bin\gcc.exe -mno-cygwin -mdll -O -Wall "-IC:\Archivos de programa\Graphviz 2.28\include\graphviz" -Ic:\python27\include -Ic:\python 27\PC -c pygraphviz/graphviz_wrap.c -o build\temp.win32-2.7\Release\pygraphviz\graphviz_wrap.o pygraphviz/graphviz_wrap.c: In function 'agattr_label': pygraphviz/graphviz_wrap.c:2855:5: warning: return makes integer from pointer without a cast writing build\temp.win32-2.7\Release\pygraphviz\_graphviz.def Traceback (most recent call last): File "setup.py", line 146, in <module> package_data = package_data File "c:\python27\lib\distutils\core.py", line 152, in setup dist.run_commands() File "c:\python27\lib\distutils\dist.py", line 953, in run_commands self.run_command(cmd) File "c:\python27\lib\distutils\dist.py", line 972, in run_command cmd_obj.run() File "c:\python27\lib\distutils\command\build.py", line 127, in run self.run_command(cmd_name) File "c:\python27\lib\distutils\cmd.py", line 326, in run_command self.distribution.run_command(command) File "c:\python27\lib\distutils\dist.py", line 972, in run_command cmd_obj.run() File "c:\python27\lib\distutils\command\build_ext.py", line 340, in run self.build_extensions() File "c:\python27\lib\distutils\command\build_ext.py", line 449, in build_extensions self.build_extension(ext) File "c:\python27\lib\distutils\command\build_ext.py", line 531, in build_extension target_lang=language) File "c:\python27\lib\distutils\ccompiler.py", line 741, in link_shared_object extra_preargs, extra_postargs, build_temp, target_lang) File "c:\python27\lib\distutils\cygwinccompiler.py", line 260, in link target_lang) File "c:\python27\lib\distutils\unixccompiler.py", line 218, in link libraries) File "c:\python27\lib\distutils\ccompiler.py", line 1121, in gen_lib_options opt = compiler.runtime_library_dir_option(dir) File "c:\python27\lib\distutils\unixccompiler.py", line 285, in runtime_library_dir_option compiler = os.path.basename(sysconfig.get_config_var("CC")) File "c:\python27\lib\ntpath.py", line 198, in basename return split(p)[1] File "c:\python27\lib\ntpath.py", line 170, in split d, p = splitdrive(p) File "c:\python27\lib\ntpath.py", line 125, in splitdrive if p[1:2] == ':': TypeError: 'NoneType' object is not subscriptable Any idea on how to solve it over windows? In other computer with Ubuntu I've installed without problems.

  Read the article

• Optimizing multiple dispatch notification algorithm in C#?

  - by Robert Fraser

  Sorry about the title, I couldn't think of a better way to describe the problem. Basically, I'm trying to implement a collision system in a game. I want to be able to register a "collision handler" that handles any collision of two objects (given in either order) that can be cast to particular types. So if Player : Ship : Entity and Laser : Particle : Entity, and handlers for (Ship, Particle) and (Laser, Entity) are registered than for a collision of (Laser, Player), both handlers should be notified, with the arguments in the correct order, and a collision of (Laser, Laser) should notify only the second handler. A code snippet says a thousand words, so here's what I'm doing right now (naieve method): public IObservable<Collision<T1, T2>> onCollisionsOf<T1, T2>() where T1 : Entity where T2 : Entity { Type t1 = typeof(T1); Type t2 = typeof(T2); Subject<Collision<T1, T2>> obs = new Subject<Collision<T1, T2>>(); _onCollisionInternal += delegate(Entity obj1, Entity obj2) { if (t1.IsAssignableFrom(obj1.GetType()) && t2.IsAssignableFrom(obj2.GetType())) obs.OnNext(new Collision<T1, T2>((T1) obj1, (T2) obj2)); else if (t1.IsAssignableFrom(obj2.GetType()) && t2.IsAssignableFrom(obj1.GetType())) obs.OnNext(new Collision<T1, T2>((T1) obj2, (T2) obj1)); }; return obs; } However, this method is quite slow (measurable; I lost ~2 FPS after implementing this), so I'm looking for a way to shave a couple cycles/allocation off this. I thought about (as in, spent an hour implementing then slammed my head against a wall for being such an idiot) a method that put the types in an order based on their hash code, then put them into a dictionary, with each entry being a linked list of handlers for pairs of that type with a boolean indication whether the handler wanted the order of arguments reversed. Unfortunately, this doesn't work for derived types, since if a derived type is passed in, it won't notify a subscriber for the base type. Can anyone think of a way better than checking every type pair (twice) to see if it matches? Thanks, Robert

  Read the article

• 'object' undeclared <first use in this function>

  - by Mohit Deshpande

  I am using Winchain to develop on my Windows 7 machine. Here is my code: iPhoneTest.h #import <Foundation/Foundation.h> #import <UIKit/UIKit.h> @interface iPhoneTest : UIApplication { UITextView *textview; UIView *mainView; } @end iPhoneTest.m #import "iPhoneTest.h" #import <UIKit/UIKit.h> #import <Foundation/Foundation.h> #import <CoreFoundation/CoreFoundation.h> @implementation iPhoneTest -(void)applicationDidFinishLaunching:(id)unused { UIWindow *window; struct CGRect rect = [UIHardware fullScreenApplicationContentRect]; rect.origin.x = rect.origin.y = 0.0f; window = [[UIWindow alloc] initWithContentRect: rect]; mainView = [[UIView alloc] initWithFrame: rect]; textView = [[UITextView alloc] init]; [textView setEditable:YES]; [textView setTextSize:14]; [window orderFront: self]; [window makeKey: self]; [window _setHidden: NO]; [window setContentView: mainView]; [mainView addSubview:textView]; [textView setText:@"Hello World"]; } @end main.m #import <Foundation/Foundation.h> #import <UIKit/UIKit.h> #import "iPhoneTest.h" int main(int argc, char *argv[]) { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; int ret = UIApplicationMain(argc, argv, [iPhoneTest class]); [pool release]; return ret; } Makefile INFOPLIST_FILE=Info.plist SOURCES=\ main.m \ iPhoneTest.m CC=/usr/local/bin/arm-apple-darwin-gcc CFLAGS=-g -O2 -Wall LD=$(CC) LDFLAGS=-lobjc -framework CoreFoundation -framework Foundation -framework UIKit -framework LayerKit PRODUCT_NAME=iPhoneTest SRCROOT=/iphone-apps/iPhoneTest WRAPPER_NAME=$(PRODUCT_NAME).app EXECUTABLE_NAME=$(PRODUCT_NAME) SOURCES_ABS=$(addprefix $(SRCROOT)/,$(SOURCES)) INFOPLIST_ABS=$(addprefix $(SRCROOT)/,$(INFOPLIST_FILE)) OBJECTS=\ $(patsubst %.c,%.o,$(filter %.c,$(SOURCES))) \ $(patsubst %.cc,%.o,$(filter %.cc,$(SOURCES))) \ $(patsubst %.cpp,%.o,$(filter %.cpp,$(SOURCES))) \ $(patsubst %.m,%.o,$(filter %.m,$(SOURCES))) \ $(patsubst %.mm,%.o,$(filter %.mm,$(SOURCES))) OBJECTS_ABS=$(addprefix $(CONFIGURATION_TEMP_DIR)/,$(OBJECTS)) APP_ABS=$(BUILT_PRODUCTS_DIR)/$(WRAPPER_NAME) PRODUCT_ABS=$(APP_ABS)/$(EXECUTABLE_NAME) all: $(PRODUCT_ABS) $(PRODUCT_ABS): $(APP_ABS) $(OBJECTS_ABS) $(LD) $(LDFLAGS) -o $(PRODUCT_ABS) $(OBJECTS_ABS) $(APP_ABS): $(INFOPLIST_ABS) mkdir -p $(APP_ABS) cp $(INFOPLIST_ABS) $(APP_ABS)/ $(CONFIGURATION_TEMP_DIR)/%.o: $(SRCROOT)/%.m mkdir -p $(dir $@) $(CC) $(CFLAGS) $(CPPFLAGS) -c $< -o $@ clean: echo rm -f $(OBJECTS_ABS) echo rm -rf $(APP_ABS) When I try to compile it with make, I get iPhoneTest.m: In fucntion '-[iPhoneTest applicationDidFinishLaunching:]' iPhoneTest.m:15: error: 'testView' undeclared <first use in this function> iPhoneTest.m:15: error: <Each undeclared identifier is reported only once for each function it appears in> Can anyone spot the problem?

  Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >