Search Results

Search found 18775 results on 751 pages for 'old hardware'.

Page 98/751 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

• What the different hardware temperatures listed in psensor, sensor viewer etc reffer to?

  - by cipricus

  I have installed psensor and see a list of temperatures, but listed as ”Temperature 1”, 2, 3 etc . I can only guess where the processor is: but who's who for sure? The same question stands for Sensors Viewer. I can also type sensors in Terminal but I get no more than that acpi -t gives Thermal 0: ok, 65.0 degrees C Thermal 1: ok, 37.9 degrees C Thermal 2: ok, 56.0 degrees C Thermal 3: active, 71.0 degrees C Considering psensor, I know for a fact that: - the temperature that varies most depending on the CPU use is Temp1 and it is one of the two highest - the other high temperature is Temp4 and it goes to the ceiling when using youtube/flash - Temp2 is very stable at a medium level of 50-60 degrees Celsius - Temp3 is by far the lowest and most imobile So, I guess Temp1 is the CPU temperature, and Temp4 is the GPU temperature. Temp2 and 3 must be the motherboard and the hdd. Does anybody know for sure?

  Read the article

• If you tried to use Ubuntu then went back to your old OS, why did you do so?

  - by Michael Forrest

  Over the past few years I've been dipping in and out of Ubuntu every so often because I believe in the idea. However, there have always been factors that have made me give up and return to either Windows or OS X, intending to come back when Ubuntu has had a bit more time to 'bake'. Anecdotally, if you have had similar experiences, why did you go back? If we can address these sorts of issues, maybe Ubuntu can get over this hump. I mean 'chasm'.

  Read the article

• You wouldn&rsquo;t drink 9 year old milk would you?

  - by Jim Duffy

  This is an absolutely brilliant campaign to urge users that its time to move on from IE 6. I like how it puts it terms that everyone can understand and has probably experienced at one time or another. How many times have you opened the milk, took a sniff, and experienced that visceral reaction that accompanies catching a whiff of milk that has turned to the dark side of the force? I call it Darth Vader milk. :-) Of course I’m assuming that you haven’t used IE 6 for a long time now. It is our responsibility as information technology workers to communicate to our friends and family how lame using IE 6 is. Shame them into upgrading if necessary. I don’t care how you get through to them but get through. Tell them that only losers use IE 6. Tell them you’ll cut them out of the your will. Tell them they’re banned from your annual BBQ blowout. Tell them that [insert their favorite celebrity’s name here] thinks people using IE6 are losers.  :-) Seriously, IE6 sucks and blows at the same time and has got to go for a number of reasons including the security leaks that come with using it. Confidentially, I urge them to upgrade for purely selfish reasons. Because I am the first level of computer support for waaaaaay to many of my family members I always advocate they use a current browser (IE 8 or Firefox) and anti-virus software (AVG). Call me selfish but I’d rather not waste my time dealing with a virus or malware that could potentially slip through with IE6. Yes, I’m selfish with my time that way. :-) Have a day. :-|

  Read the article

• So now Google has said no to old browsers when can the rest of us follow suit?

  - by Richard

  Google recently announced that they will no longer support older browsers on Aug 1st: http://www.bbc.co.uk/news/technology-13639875 http://gmailblog.blogspot.com/2011/06/our-plans-to-support-modern-browsers.html For this reason, soon Google Apps will only support modern browsers. Beginning August 1st, we’ll support the current and prior major release of Chrome, Firefox, Internet Explorer and Safari on a rolling basis. Each time a new version is released, we’ll begin supporting the update and stop supporting the third-oldest version. There is nothing worse than looking at the patching of code that takes place to support older browsers. If we could all move towards a standards only web (I'm looking at you IE9) then surely we could spend more time programming good web apps and less trying to make them run equally on terrible non standards compliant older browsers. So when can the rest of us expect to be able to tell our clients that we no longer support older browsers? Because it seems that large corporates will continue to run older browsers and even if google chrome frame can be installed without admin privileges (it's coming soon, currently in beta) we can't expect all users to be motivated to do this. I appreciate any thoughts.

  Read the article

• Are backlinks transitive when old URL is forwarded to new URL?

  - by JVerstry

  Say there are two companies operating in the same industry: www.companya.com and www.companyb.com. Company A has acquired some backlinks over time. Company B acquires company A and decides to only use its URL. It forwards properly all links from www.companya.com to www.companyb.com. Will company B benefit from the backlinks of www.companya.com through the redirection? Is it worth the effort from a backlink perspective only?

  Read the article

• Feature: "Software. Hardware. Complete."

  Oracle finalizes the acquisition of Sun, heralding a new beginning.

  Read the article

• How can I install an old version of libc on 12.04 and is it safe to do so?

  - by mathematician1975

  I am building an application on 12.04 and I need to run it on an embedded device. The device has libc-2.8.90.so on it and my dev machine has libc-2.15.so on it. I would like to install libc-2.8.90 onto my dev machine and attempt to link it to my application. I have searched at the Ubuntu software centre for libc-2.8.90 but I cannot find anything resembling it. Is there a way to install this on my machine from command line?? Also will my system be safe having 2 installed versions of libc at the same time? Can it lead to any instability?

  Read the article

• Is C++11 Uniform Initialization a replacement for the old style syntax?

  - by Robert Dailey

  I understand that C++11's uniform initialization solves some syntactical ambiguity in the language, but in a lot of Bjarne Stroustrup's presentations (particularly those during the GoingNative 2012 talks), his examples primarily use this syntax now whenever he is constructing objects. Is it recommended now to use uniform initialization in all cases? What should the general approach be for this new feature as far as coding style goes and general usage? What are some reasons to not use it? Note that in my mind I'm thinking primarily of object construction as my use case, but if there are other scenarios to consider please let me know.

  Read the article

• How can I access old KMail emails after upgrading to Ubuntu 11.10?

  - by Gary Kleppe

  I initially installed Ubuntu 11.04 and used KMail for my email. All well and good. Then I upgraded to Ubuntu 11.10. Presumably an upgrade of KMail took place as part of this. Now KMail won't even run; when I try, it tells me "Failed to fetch the resource collection" and crashes. I don't mind switching to another email client, but I'd very much like to be able to recover all of the emails I have stored in KMail. Any suggestions on how to do this? Thanks for any help anyone can provide.

  Read the article

• Google is still crawling and indexing my old, dummy, test pages which now are 404 not found

  - by Ace

  I have set up my site with sample pages and data (lorem ipsum, etc..) and Google has crawled these pages. I deleted all these pages and actually added real content but in webmaster tools, i still get a lot of 404 errors Google trying to crawl these pages. I have set them to "mark as resolved" but some pages still come back as 404. Furthermore, I have a lot of these sample pages still listed when i do a search of my site on Google. How to remove them. I think these irrelevant pages are hurting my rating. I actually wanted to erase all these pages and start getting my site being being indexed as a new one but I read it's not possible? (I have submitted a sitemap and used "Fetch as Google.")

  Read the article

• Don’t Like New Google Search Interface? Switch To Old Interface

  - by Gopinath

  Google recently adopted a new user interface layout for it’s search engine. The new layout is very different to classic one, it provides many options on the left side to choose for enhanced search operations. Even though many users like this new interface, there are few who are more comfortable with the classic interface. If you are one among those who wanted to switch back to classic interface, you can access it by using the following http://www.google.com/webhp?hl=all Join us on Facebook to read all our stories right inside your Facebook news feed.

  Read the article

• 25 years old and considering a career change...possible? practical?

  - by mq330

  Hi all, I'm new to this site and new to programming as well. I've spent some time going through an intro cs book that uses python as the language of choice. I find the exercises interesting and engaging and I generally have had a favorable experience programming so far. I've gone through some of the basics with python like writing simple programs, basics of GUIs, manipulating strings, lists, defining functions, etc. And I've always loved technology. Although I've never done any real hardcore programming yet, I was inclined to building websites from a very young age but I never really developed my skills. Now, the thing is I'm 25, I have my bacholors in environmental studies and two masters degrees in urban planning and landscape architecture respectively. I know, it would be quite a departure to pursue a career in programming at this point. Currently, I'm working as a geographic information systems intern. I've taken some GIS classes and have a lot of experience with making maps, doing spatial analysis etc. So what I'm thinking is maybe I can learn some solid programming skills and apply these skills in the field of GIS. From what I've seen, .net languages are the norm in this arena. Could you perhaps provide some guidance to me in terms of what languages I should focus on or courses I should take at this point? What about for building web mapping applications? Also, I was thinking about getting a certificate in programming from a university extension program. Do you think it would be worth it? And furthermore, do you think potential employers would be interested in hiring someone like me (once I get a couple of languages down pretty well) as an intern or in an entry level position? I'll be living in the bay area so I feel that there should be decent opportunities even though I don't have a b.s. in cs.

  Read the article

• Is there anything different in cifs for 13.04? I can't mount with old config

  - by Stefano

  I've recently upgraded my station to 13.04 and all mounts I had on /etc/fstab stopped working. I can't even mount them at terminal (mount -t cifs ...), through smbclient or nautilus. I always get 'NT_STATUS_LOGON_FAILURE'; Provided nothing has changed at the server, I assume some configuration has changed in the packages of 13.04. Maybe password encryption, maybe port? I have just spent 10 hours looking for a solution and, since I have a serious time retrain, I am considering rolling back to 12.10. Could someone give a clue where to find it? Thanks all.

  Read the article

• 5 year old ubuntu system, always dist-upgraded => ok. however some tasks remain

  - by knb

  I have a PC with a current ubuntu distribution installed. I've upgraded many times since 5.10. It always went well, however some tools or features were kindof left behind in a unsatisfactory state: grub to grub2 - is it an really necessary to switch the boot loader some time to grub2. Upgrading this scares me abit. I still have ext3 devices - is it worth upgrading to ext4? should I wait for btrfs? hibernation and suspend- it only worked in 5.10, since 6.04 it was messed up. Should I really care? Any chance to repair this myself? Simply by cleanup or hacking config files. It is a desktop PC after all. So energy saving functionality is not really needed. I am using vmware workstation 6.5 and the latest kernel that supports it is 2.6.32. This is my default kernel now, ignoring 2.6.35. Am I missing anything important in the new kernel now?

  Read the article

• Why does installing 11.10 or 12.04 on old laptops fail?

  - by Adam

  I recently reimaged my Lenovo t400 with Ubuntu. However, after wiping two other systems (Compaq Presario 2100 and Dell Latitude D600) both hUbuntu 11.10 and Ubuntu 12.04 fail to load on boot. I am concerned that there is some type of issue using Ubuntu on these older systems as every part of the process has been repeated/attempted several times in the same manner as practiced in the successful load of the newer Lenovo t400. I now have two laptops without an operating system as the discs/thumb drives that were formatted to load on these devices do not seem to work. I would appreciate any assistance that you may be able to provide. Regards, -Adam

  Read the article

• What does "kTriangles/s" mean in hardware graphics benchmark reports?

  - by swquinn

  I've looked around and found several sites offering benchmarking statistics for mobile platforms and I've been seeing the unit of measure as "kTriangles/s". Originally I misread this, missing the 'k'; does this translate to "thousand(s) of triangles/s", e.g.: 8902 kTriangles/s = 8,902,000 triangles/s (I'm pretty sure that my interpretation is correct, but I hope someone can confirm this for me) Thanks!

  Read the article

• Hardware question; booting ubuntu off of USB flash drive?

  - by Kon

  I'm currently running ubuntu off of a USB 3.0 flash drive on my laptop, and I have another USB 3.0 flash drive I use for storing larger files that I need to access and whatnot. But the issue is that both of the usb 3.0 flash drives don't fit next to each other at all, so I'm forced to use another usb 2.0 port located in a different spot on my laptop. Now my question is that if I use a USB 3.0 hub will that slow my connections down at all? or cause some sort of interference? Another question I had which I was unable to find anywhere on the internet is if there was a USB 3.0 hub with more than one upstream connection? Thanks for your time!

  Read the article

• After replacing all tables in an old website with divs, what other steps should I take?

  - by guisasso

  I have designed a website a few years back, and it ranks pretty well, customer is happy, no problems there. I took one of the pages and replaced manually all the tables with divs, used structured data and got the website to look exactly the same. I would like to know, what other steps should I take to improve or at least not hurt this page's rank, or if perhaps I should juts not bother altogether. What are best practices here? The page is not live yet. Thanks.

  Read the article

• Relook your Old and New Native Applications with a Ribbon UI under Vista or Windows 7 (WTL)

  Including a Ribbon UI Implementation Guide with examples and a dual UI enabled legacy application

  Read the article

• why there is a lot change in the hardware support features in different linux os?

  - by TrazerWalker

  i am using lenovo b460 with 3 GB ram and 500 GB hard disk,(no graphics card). when i live boot Linux mint i was able to connect to WiFi.but when i booted up Ubuntu 11.4 i was not able to connect through WiFi.then later i installed Ubuntu 12.4 and then i got connected with WiFi, but after installing icons and themes through my unity i am not able to view the content in the terminal and the WiFi is also not connecting now even after i changed them all back. wireless connectivity

  Read the article

• Is it possible to use the Raring install image as a package repo (like the old alternate CD)?

  - by jamadagni

  I use Kubuntu and recently upgraded to Raring directly from Precise. Until Precise, I always installed the OS using the alternate CD and not the desktop CD, because I could later on mount the image and use it as an offline package repo. For instance if I remove a package installed by the default installer and later I want to install it again, I can just install it from the ISO without needing to download it again. However, since Quantal the alternate CD no longer exists, so I am not sure how to set up the installed image as a local repo. I mean, doing find . -name "*.deb" inside the ISO tree after loopmounting it only shows a few packages like libc6 gcc and such and not the full set of packages that are actually installed -- I presume they are included in pre-installed form inside casper/filesystem.squashfs. Given this situation, is it or is it not possible to use the Raring install images as offline repos? If yes, how? Thank you!

  Read the article

• Choosing the right TV tuner - USB or PCI TV tuners, hardware/software, DVB? Hybrid/combo/analog?

  - by Nucleon

  Greetings, I'll start with some background information so you know what I'm trying to accomplish and then get to my question. I work at a Television station in the US and we are working on setting up an online DVR/Podcast system for all of our newscasts. So basically we would be recording every newscast in HD, encoding it to flv/h.264 for viewing in a browser on flash compatible and iphone/ipad devices, eventually migrating to WebM when it's browser compliant. This task is theoretically pretty simple as it all it involves is a TV tuner device and a program like VLC, MythTV or whatever to schedule and dump it to a file, encode it with VLC/FFMPEG and push it to the streaming server. Now to the hardware, in order to accomplish that task, should I use an internal PCI tuner or a USB 2.0 tuner? Is there a difference? The bus speeds of both are not too far apart, and is the bus speed really relevant in this case? Does it matter if the device has a hardware encoder or a software encoder? On many sites the USB was recommended for ease of set up and use, but would it overly task a processor, or is that not a concern as long as it's a decent PC (at least duo core, 6gb ram). What's the difference between the stick USB and the Box USBs? To my understanding analog is basically gone in the US, so we would want a hybrid or combo tuner correct? How do those differ from DVB? Are there any other features or concepts which I am missing which may influence the recommended product. It would be ideal if the device which could work in both Linux and a Windows environment, to my knowledge most Hauppauge are? Example 1: PCI Hauppage http://www.newegg.com/Product/Product.aspx?Item=N82E16815116033 Example 2: USB 2.0 Box http://www.newegg.com/Product/Product.aspx?Item=N82E16815116029 Example 3: USB 2.0 Stick http://www.newegg.com/Product/Product.aspx?Item=N82E16815116031 Any guidance from the Superusers would be much appreciated!

  Read the article

• Can a hardware firewall block a server accessing its OWN UNC shares?

  - by Simon

  I need to set up a UNC share for my hosted dedicated server to access a share on itself. Unfortunately TFS requires a UNC share. I am on a Windows Server 2008 Standard SP2 64bit dedicated server behind a PIX 501 firewall hosted with GoDaddy. I just cannot get the server to access itself and get this error: Windows cannot access \\SERVER\SHARE Check the spelling of the name.. etc. I've found numerous questions about this but no answer to my problem. Server 2008 Standard x64 SP2 Workgroup - not domain Windows Firewall is off Computer browser service is on I am trying to access \\MYMACHINE\TFS-BUILDS by typing in - or double clicking. Neither works. Machine has single network card Filesharing wizard says share was ok Share was showing under 'Computer management' Permissions are set to 'everyone' full control No obvious errors in eventlog Reboot didn't fix it Unfortunately I cannot try to access other shares in or out of this machine because it is a hosted dedicated server and the only machine behind a hardware firewall. The only thing left i can think of is that the hardware firewall needs to be configured. Is this possible? Does 'UNC traffic' go out of the machine and then back in again?

  Read the article

• What's the piece of hardware listening on Facebook's or Wikipedia's IP address?

  - by Igor Ostrovsky

  I am trying to understand how massive sites like Facebook or Wikipedia work, for my intellectual curiosity. I read about various techniques for building scalable sites, but I am still puzzled about one particular detail. The part that confuses me is that ultimately, the DNS will map the entire domain to a single IP address, or a handful of IP addresses in the case of round-robin DNS. For example, wikipedia.org has only one type-A DNS record. So, people from all over the world visiting Wikipedia have to send a request to the one IP address specified in DNS. What is the piece of hardware that listens on the IP address for a massive site, and how can it possibly handle all the load coming from the requests for users all over the world? Edit 1: Thanks for all the responses! Anycast seems like a feasible answer... Does anyone know of a way to check whether a particular IP address is anycast-routed, so that I could verify that this really is the trick used in practice by large sites? Edit 2: After more reading on the topic, it appears that anycast is not typically used for dynamic web content. Anycast is usually used for UDP (e.g., DNS lookups), or sometimes for static content. One interesting thing to note is that Facebook uses profile.ak.fbcdn.net to host static content like style sheets and javascript libraries. Each time I ping this name, I get a response from a different IP address. However, I can't tell whether this is anycast in action, or a completely different technique. Back to my original question: as far as I can tell, even a large site will have a single expensive piece of load-balancing hardware listening on its handful of public IP addresses.

  Read the article

• How do I lower the hardware volume? (volume too high)

  - by Zom-B

  I have a 4yo Dell laptop with Windows XP Pro (modern ones unfortunately don't have a physical volume knob), and lately I'm using my Apple earphones, because they have much better low frequency response than my $10 earphones. They also have the side effect of being much louder. To give an indication of my agony, for most tasks (movie, music, games) I have my main volume at 3 ticks: drag to 0 with the mouse and press the up key 3 times (the handle does not even raise 1 pixel) and my wave volume at 50%. I notice that when I do this, I have a lot of digital noise, because I'm using just a tiny fraction of the 16-bit space. If I drag the Wave slider down until I barely hear the audio, it becomes really distorted and noisy, indicating that this is digital volume (in the DirectSound driver or something) and not hardware volume. I experimented in Audition. When I make a tone of 1000Hz at -50db, (all windows volumes at max) the volume is just below my pain threshold. When I zoom in to see how high the sample values reach, I see that just 8 of the 16 bits are used (about -100 ~ 100). When I generate such tone at -80db (minimum I can specify) then I can still clearly hear the tone, although really noisy. When I zoom in, I see that just 3 out of 16 bits are used. I created a squarewave tone that is just 1 bit high, and I can still hear it! For most uses, this is not a big problem (audiophiles will disagree!), as I just have more noise than usual (about the same as old 8 bit hardware), but I'm also in the process of programming a hearing test program, in which case this problem is a death blow as the test subjects will even hear tones at the bottom of the theoretical range (lowering the windows volume is futile, see above) (I cannot update drivers, as Dell has discontinued XP support for my model)

  Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >