Search Results

Search found 7114 results on 285 pages for 'auto'.

Page 99/285 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

• Skipping scheduled self-tests and predicting drive EOL

  - by Steve Madsen

  For a few weeks now, smartd has been reporting that it is skipping some of its scheduled self-tests on the weekends: Apr 24 18:29:32 calvin smartd[4758]: Device: /dev/sda, skip scheduled Offline Immediate Test; 40% remaining of current Self-Test. Apr 24 18:29:33 calvin smartd[4758]: Device: /dev/sdb, skip scheduled Offline Immediate Test; 50% remaining of current Self-Test. The drives in this RAID-1 array are set to run an offline test four times a day, a short self-test at 2am every day, and a long self-test on Saturdays at 2am. For some reason, it looks like the long self-test is taking longer, causing the other scheduled tests to be skipped. First question: is this a sign of likely drive failure? Then today, smartd reported that a self-test failed. Here is the output of smartctl -a /dev/sdb: smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823AS Serial Number: 3ND1GNBC Firmware Version: 3.03 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Apr 25 13:15:34 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 047 039 006 Pre-fail Always - 168450357 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 9 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 654745480 9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 40141 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 51 194 Temperature_Celsius 0x0022 037 062 000 Old_age Always - 37 (0 17 0 0) 195 Hardware_ECC_Recovered 0x001a 047 039 000 Old_age Always - 168450357 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 40131 - # 2 Extended offline Completed: read failure 30% 40129 379795511 # 3 Short offline Completed without error 00% 40084 - # 4 Short offline Completed without error 00% 40060 - # 5 Short offline Completed without error 00% 40036 - # 6 Short offline Completed without error 00% 40013 - # 7 Short offline Completed without error 00% 39990 - # 8 Extended offline Completed without error 00% 39977 - # 9 Short offline Completed without error 00% 39919 - #10 Short offline Completed without error 00% 39895 - #11 Short offline Completed without error 00% 39872 - #12 Short offline Completed without error 00% 39848 - #13 Short offline Completed without error 00% 39824 - #14 Short offline Completed without error 00% 39801 - #15 Extended offline Completed without error 00% 39789 - #16 Short offline Completed without error 00% 39754 - #17 Short offline Completed without error 00% 39732 - #18 Short offline Completed without error 00% 39707 - #19 Short offline Completed without error 00% 39683 - #20 Short offline Completed without error 00% 39660 - #21 Short offline Completed without error 00% 39636 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Given that this drive is about 4.5 years old, I am probably tempting fate by keeping it in service. SMART doesn't seem to get much respect as a reliable way to predict drive failure. What else can I use to get an early indication of drive failure?

  Read the article

• How can I get the output of a command terminated by a alarm() call in Perl?

  - by rockyurock

  Case 1 If I run below command i.e iperf in UL only, then i am able to capture the o/p in txt file @output = readpipe("iperf.exe -u -c 127.0.0.1 -p 5001 -b 3600k -t 10 -i 1"); open FILE, ">Misplay_DL.txt" or die $!; print FILE @output; close FILE; Case 2 When I run iperf in DL mode , as we know server will start listening in cont. mode like below even after getting data from client (Here i am using server and client on LAN) @output = system("iperf.exe -u -s -p 5001 -i 1"); on server side: D:\_IOT_SESSION_RELATED\SEEM_ELEMESNTS_AT_COMM_PORT_CONF\Tput_Related_Tools\AUTO MATION_APP_\AUTOMATION_UTILITYiperf.exe -u -s -p 5001 ------------------------------------------------------------ Server listening on UDP port 5001 Receiving 1470 byte datagrams UDP buffer size: 8.00 KByte (default) ------------------------------------------------------------ [1896] local 192.168.5.101 port 5001 connected with 192.168.5.101 port 4878 [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [1896] 0.0- 2.0 sec 881 KBytes 3.58 Mbits/sec 0.000 ms 0/ 614 (0%) command prompt does not appear , process is contd... on client side: D:\_IOT_SESSION_RELATED\SEEM_ELEMESNTS_AT_COMM_PORT_CONF\Tput_Related_Tools\AUTO MATION_APP_\AUTOMATION_UTILITYiperf.exe -u -c 192.168.5.101 -p 5001 -b 3600k -t 2 -i 1 ------------------------------------------------------------ Client connecting to 192.168.5.101, UDP port 5001 Sending 1470 byte datagrams UDP buffer size: 8.00 KByte (default) ------------------------------------------------------------ [1880] local 192.168.5.101 port 4878 connected with 192.168.5.101 port 5001 [ ID] Interval Transfer Bandwidth [1880] 0.0- 1.0 sec 441 KBytes 3.61 Mbits/sec [1880] 1.0- 2.0 sec 439 KBytes 3.60 Mbits/sec [1880] 0.0- 2.0 sec 881 KBytes 3.58 Mbits/sec [1880] Server Report: [1880] 0.0- 2.0 sec 881 KBytes 3.58 Mbits/sec 0.000 ms 0/ 614 (0%) [1880] Sent 614 datagrams D:\_IOT_SESSION_RELATED\SEEM_ELEMESNTS_AT_COMM_PORT_CONF\Tput_Related_Tools\AUTO MATION_APP_\AUTOMATION_UTILITY so with this as server is cont. listening and never terminates so can't take output of server side to a txt file as it is going to the next command itself to create a txt file so i adopted the alarm() function to terminate the server side (iperf.exe -u -s -p 5001) commands after it received all data from the client. could anybody suggest me the way.. Here is my code: #! /usr/bin/perl -w my $command = "iperf.exe -u -s -p 5001"; my @output; eval { local $SIG{ALRM} = sub { die "Timeout\n" }; alarm 20; #@output = `$command`; #my @output = readpipe("iperf.exe -u -s -p 5001"); #my @output = exec("iperf.exe -u -s -p 5001"); my @output = system("iperf.exe -u -s -p 5001"); alarm 0; }; if ($@) { warn "$command timed out.\n"; } else { print "$command successful. Output was:\n", @output; } open FILE, ">display.txt" or die $!; print FILE @output_1; close FILE; i know that with system command i cannot capture the o/p to a txt file but i tried with readpipe() and exec() calls also but in vain... could some one please take a look and let me know why the iperf.exe -u -s -p 5001 is not terminating even after the alarm call and to take the out put to a txt file

  Read the article

• How to Get The Output Of a command terminated by a alarm() call.

  - by rockyurock

  Case 1 If I run below command i.e iperf in UL only, then i am able to capture the o/p in txt file @output = readpipe("iperf.exe -u -c 127.0.0.1 -p 5001 -b 3600k -t 10 -i 1"); open FILE, ">Misplay_DL.txt" or die $!; print FILE @output; close FILE; Case 2 When I run iperf in DL mode , as we know server will start listening in cont. mode like below even after getting data from client (Here i am using server and client on LAN) @output = system("iperf.exe -u -s -p 5001 -i 1"); on server side: D:\_IOT_SESSION_RELATED\SEEM_ELEMESNTS_AT_COMM_PORT_CONF\Tput_Related_Tools\AUTO MATION_APP_\AUTOMATION_UTILITYiperf.exe -u -s -p 5001 ------------------------------------------------------------ Server listening on UDP port 5001 Receiving 1470 byte datagrams UDP buffer size: 8.00 KByte (default) ------------------------------------------------------------ [1896] local 192.168.5.101 port 5001 connected with 192.168.5.101 port 4878 [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [1896] 0.0- 2.0 sec 881 KBytes 3.58 Mbits/sec 0.000 ms 0/ 614 (0%) command prompt does not appear , process is contd... on client side: D:\_IOT_SESSION_RELATED\SEEM_ELEMESNTS_AT_COMM_PORT_CONF\Tput_Related_Tools\AUTO MATION_APP_\AUTOMATION_UTILITYiperf.exe -u -c 192.168.5.101 -p 5001 -b 3600k -t 2 -i 1 ------------------------------------------------------------ Client connecting to 192.168.5.101, UDP port 5001 Sending 1470 byte datagrams UDP buffer size: 8.00 KByte (default) ------------------------------------------------------------ [1880] local 192.168.5.101 port 4878 connected with 192.168.5.101 port 5001 [ ID] Interval Transfer Bandwidth [1880] 0.0- 1.0 sec 441 KBytes 3.61 Mbits/sec [1880] 1.0- 2.0 sec 439 KBytes 3.60 Mbits/sec [1880] 0.0- 2.0 sec 881 KBytes 3.58 Mbits/sec [1880] Server Report: [1880] 0.0- 2.0 sec 881 KBytes 3.58 Mbits/sec 0.000 ms 0/ 614 (0%) [1880] Sent 614 datagrams D:\_IOT_SESSION_RELATED\SEEM_ELEMESNTS_AT_COMM_PORT_CONF\Tput_Related_Tools\AUTO MATION_APP_\AUTOMATION_UTILITY so with this as server is cont. listening and never terminates so can't take output of server side to a txt file as it is going to the next command itself to create a txt file so i adopted the alarm() function to terminate the server side (iperf.exe -u -s -p 5001) commands after it received all data from the client. could anybody suggest me the way.. Here is my code: #! /usr/bin/perl -w my $command = "iperf.exe -u -s -p 5001"; my @output; eval { local $SIG{ALRM} = sub { die "Timeout\n" }; alarm 20; #@output = `$command`; #my @output = readpipe("iperf.exe -u -s -p 5001"); #my @output = exec("iperf.exe -u -s -p 5001"); my @output = system("iperf.exe -u -s -p 5001"); alarm 0; }; if ($@) { warn "$command timed out.\n"; } else { print "$command successful. Output was:\n", @output; } open FILE, ">display.txt" or die $!; print FILE @output_1; close FILE; i know that with system command i cannot capture the o/p to a txt file but i tried with readpipe() and exec() calls also but in vain... could some one please take a look and let me know why the iperf.exe -u -s -p 5001 is not terminating even after the alarm call and to take the out put to a txt file

  Read the article

• set all nested li's to be width of widest li

  - by unhitched

  hey, How do I make nested li's the same width? When I use the below code each nested li is only as wide as it's text + margin. I'd like all of the li's to be as wide as the widest li under the parent ul. eg: <ul id="menu"> <li <a href="#" title="Menu a">Menu a</a></li> <li <a href="#" title="Menu b">Menu b</a></li> <li <a href="#" title="Nested Menu">Nested Menu</a> <ul> <li <a href="#" title="Menu Item">Menu Item</li> <li <a href="#" title="Long Menu Item">Long Menu Item</a></li> <li <a href="#" title="Longer Menu Item">Longer Menu Item</a></li> </ul> </li> <li <a href="#" title="Menu z">Menu z</a></li> </ul> with css: <style type="text/css" media="all"> * { padding:0; margin:0; } body, html { width: 100%; height: 100%; } #wrapper { width: 800px; height: 100%; margin: auto; } #menu { margin: 0 0 0 8px; padding: 0; font-size: 14px; font-weight: normal; } #menu ul { list-style-type:none; list-style-position:outside; position:relative; z-index:300; height: 32px; font-weight:bold; white-space: nowrap; padding:0; } #menu a {text-decoration:none; line-height: 32px; } #menu a:hover { } #menu li { float:left; position:relative; display: inline; height: 100%; list-style-type: none; padding: 0 20px; background: #ccc; } #menu ul { position:absolute; display:none; left:0px; background: #BDCCD4; width:100%; } #menu ul a, #menu li a { display: block; } #menu li ul { background: #BDCCD4; display:block; } #menu li ul a { font-weight: normal; height:auto; float:left; } #menu ul ul { padding: 0 9px; display:block; } #menu li ul li { padding: 0 9px; background: #BDCCD4; } #menu li:hover { background: #ddd; height: 32px; } #menu li li:hover, #menu li li li:hover { background: #ddd; height: 32px; } #menu li a:link, #menu li a:visited { text-decoration: none; color: #003E7E; margin: auto; }

  Read the article

• Blogger issue with custom background images on Chrome and Safari

  - by hdx

  This is weird, the site in question is blog.andrebatista.info and it is a hosted at blogger.com. I'm trying to make the blogger template look the same as the one in my main website, www.andrebatista.info. For some reason if I go directly to the blog address Chrome and Safari fail to display all of my background images... all of them. However if I first go to www.andrebatista.info first and then go to the blog it renders just fine ?¿ The way I'm customizing it is by adding a link to my main site's stylesheet at the very end of the head tag on the blogger template. That stylesheet is displayed below: *{ margin:0; padding:0; border:0; } html,body { background:#064169 url(http://www.andrebatista.info/images/main_gradient_slice.jpg) repeat-x; font-family: Arial, "MS Trebuchet", sans-serif; font-size:18px; } #main_wrapper{ margin: 0 auto; width:1024px; } #header{ background: url(http://www.andrebatista.info/images/header.jpg); height:133px; border:none; margin:0; } #menu_wrapper{ background: url(http://www.andrebatista.info/images/menu.jpg); height:34px; overflow:hidden; } #menu_wrapper .menu_item{ color:white; float: left; border: 1 px solid red; height: 34px; padding-top:10px; text-align:center; width:100px; } #menu_wrapper .first{ padding-left:240px; float:left; width:100px; } #menu_wrapper .active,#menu_wrapper .menu_item:hover{ background-color:white; color:Teal; cursor: pointer; } #content_area_wrapper{ background: url(http://www.andrebatista.info/images/body_bg_slice.jpg) repeat-y; } #content_area{ min-height:524px; background: url(http://www.andrebatista.info/images/main_content_top.jpg) repeat-x; } #main_banner{ background: url(http://www.andrebatista.info/images/main_banner.jpg) no-repeat center center; width:662px; height:338px; margin: 0 auto; } #main_banner div{ color:white; padding-left:47px; padding-right:164px; padding-top:105px; } #text_area{ overflow:hidden; width:662px; margin:0 auto; padding:14px; } #contentList{ padding:0 20px 20px 20px; } #text_area .left{ width:50%; float:left; } #text_area .left{ width:50%; float:right; } #footer2{ background: url(http://www.andrebatista.info/images/footer.jpg); height:62px; } #footer{ background: url(http://www.andrebatista.info/images/footer.jpg); height:62px; } Any ideas on what I could be missing?

  Read the article

• Cisco PIX 515 doesn't seem to be passing traffic through according to static route

  - by Liquidkristal

  Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn't appear to be going anywhere. Now this firewall is deep inside a private network, with an upstream firewall that we don't manage. I have spoken to the people that look after that firewall and they say they they have traffic routing to 10.75.32.21 and 10.75.32.25 and thats it (although there is a website that runs from the server 172.16.102.5 which (if my understanding is correct) gets traffic via 10.75.32.23. Any ideas would be greatly appreciated as to me it should all just work, but its not (obviously if the config is all correct then there could be a problem with the web server that we are trying to access on 10.75.32.25, although the users say that they can get to it internally (172.16.102.8) which is even more confusing) PIX Version 6.3(3) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 academic security50 fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 195.157.180.168 outsideNET name 195.157.180.170 globalNAT name 195.157.180.174 gateway name 195.157.180.173 Mail-Global name 172.30.31.240 Mail-Local name 10.75.32.20 outsideIF name 82.219.210.17 frogman1 name 212.69.230.79 frogman2 name 78.105.118.9 frogman3 name 172.16.0.0 acadNET name 172.16.100.254 acadIF access-list acl_outside permit icmp any any echo-reply access-list acl_outside permit icmp any any unreachable access-list acl_outside permit icmp any any time-exceeded access-list acl_outside permit tcp any host 10.75.32.22 eq smtp access-list acl_outside permit tcp any host 10.75.32.22 eq 8383 access-list acl_outside permit tcp any host 10.75.32.22 eq 8385 access-list acl_outside permit tcp any host 10.75.32.22 eq 8484 access-list acl_outside permit tcp any host 10.75.32.22 eq 8485 access-list acl_outside permit ip any host 10.75.32.30 access-list acl_outside permit tcp any host 10.75.32.25 eq https access-list acl_outside permit tcp any host 10.75.32.25 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq https access-list acl_outside permit tcp host frogman1 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman2 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman3 host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.23 eq 2001 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp any host 10.75.32.23 eq smtp access-list acl_outside permit tcp any host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.24 eq ssh access-list acl_acad permit icmp any any echo-reply access-list acl_acad permit icmp any any unreachable access-list acl_acad permit icmp any any time-exceeded access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq www access-list acl_acad deny tcp any any eq www access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq https access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq 8080 access-list acl_acad permit tcp host 172.16.102.5 host 10.64.1.115 eq smtp pager lines 24 logging console debugging mtu outside 1500 mtu inside 1500 mtu academic 1500 ip address outside outsideIF 255.255.252.0 no ip address inside ip address academic acadIF 255.255.0.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400 global (outside) 1 10.75.32.21 nat (academic) 1 acadNET 255.255.0.0 0 0 static (academic,outside) 10.75.32.22 Mail-Local netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.30 172.30.30.36 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.23 172.16.102.5 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.24 172.16.102.6 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.25 172.16.102.8 netmask 255.255.255.255 0 0 access-group acl_outside in interface outside access-group acl_acad in interface academic route outside 0.0.0.0 0.0.0.0 10.75.32.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local snmp-server host outside 172.31.10.153 snmp-server host outside 172.31.10.154 snmp-server host outside 172.31.10.155 no snmp-server location no snmp-server contact snmp-server community CPQ_HHS no snmp-server enable traps floodguard enable telnet 172.30.31.0 255.255.255.0 academic telnet timeout 5 ssh timeout 5 console timeout 0 terminal width 120 Cryptochecksum:hi2u : end PIX515#

  Read the article

• WPF items not visible when grouping is applied

  - by Tri Q

  Hi, I'm having this strange issue with my ItemsControl grouping. I have the following setup: <ItemsControl Margin="3" ItemsSource="{Binding Communications.View}" > <ItemsControl.GroupStyle> <GroupStyle> <GroupStyle.ContainerStyle> <Style TargetType="{x:Type GroupItem}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type GroupItem}"> <Expander> <Expander.Header> <Grid> <Grid.ColumnDefinitions > <ColumnDefinition Width="*" /> <ColumnDefinition Width="Auto" /> </Grid.ColumnDefinitions> <TextBlock Text="{Binding ItemCount, StringFormat='{}[{0}] '}" FontWeight="Bold" /> <TextBlock Grid.Column="1" Text="{Binding Name, Converter={StaticResource GroupingFormatter}, StringFormat='{}Subject: {0}'}" FontWeight="Bold" /> </Grid> </Expander.Header> <ItemsPresenter /> </Expander> </ControlTemplate> </Setter.Value> </Setter> </Style> </GroupStyle.ContainerStyle> </GroupStyle> </ItemsControl.GroupStyle> <ItemsControl.ItemTemplate> <DataTemplate> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto" /> <ColumnDefinition Width="*" /> <ColumnDefinition Width="Auto" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition /> <RowDefinition /> </Grid.RowDefinitions> <TextBlock FontWeight="Bold" Text="{Binding Inspector, Converter={StaticResource NameFormatter}, StringFormat='{}From {0}:'}" Margin="3" /> <TextBlock Text="{Binding SentDate, StringFormat='{}{0:dd/MM/yy}'}" Grid.Row="1" Margin="3"/> <TextBlock Text="{Binding Message }" Grid.Column="1" Grid.RowSpan="2" Margin="3"/> <Button Command="vm:CommunicationViewModel.DeleteMessageCommand" CommandParameter="{Binding}" HorizontalAlignment="Right" Grid.Column="2">Delete</Button> </Grid> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> In my ViewModel, I expose a CollectionViewSource named 'Communications'. I proceed to adding a grouping patter like so: Communications.GroupDescriptions.Add(new PropertyGroupDescription("Subject")); Now, the problem i'm experience is the grouping work fine, but I can't see any items inside the groups. What am I doing wrong? Any pointers would be much appreciated.

  Read the article

• backgroundworker+wpf -> frozen window

  - by Valetudox

  -progressbar always 0% -the window is froozen (while DoWork r.) -if System.threading.thread.sleep(1) on - works perfectly whats the problem? private void btnNext_Click(object sender, RoutedEventArgs e) { this._worker = new BackgroundWorker(); this._worker.DoWork += delegate(object s, DoWorkEventArgs args) { long current = 1; long max = generalMaxSzam(); for (int i = 1; i <= 30; i++) { for (int j = i+1; j <= 30; j++) { for (int c = j+1; c <= 30; c++) { for (int h = c+1; h <= 30; h++) { for (int d = h+1; d <= 30; d++) { int percent = Convert.ToInt32(((decimal)current / (decimal)max) * 100); this._worker.ReportProgress(percent); current++; //System.Threading.Thread.Sleep(1); - it works well } } } } } }; this._worker.WorkerReportsProgress = true; this._worker.RunWorkerCompleted += delegate(object s, RunWorkerCompletedEventArgs args) { this.Close(); }; this._worker.ProgressChanged += delegate(object s, ProgressChangedEventArgs args) { this.statusPG.Value = args.ProgressPercentage; }; this._worker.RunWorkerAsync(); } <Window x:Class="SzerencsejatekProgram.Create" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Létrehozás" mc:Ignorable="d" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" Height="500" Width="700"> <DockPanel> <Button DockPanel.Dock="Right" Name="btnNext" Width="80" Click="btnNext_Click">Tovább</Button> <StatusBar DockPanel.Dock="Bottom"> <StatusBar.ItemsPanel> <ItemsPanelTemplate> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="*"/> <ColumnDefinition Width="Auto"/> <ColumnDefinition Width="auto"/> <ColumnDefinition Width="auto"/> </Grid.ColumnDefinitions> </Grid> </ItemsPanelTemplate> </StatusBar.ItemsPanel> <StatusBarItem Grid.Column="1"> <TextBlock Name="statusText"></TextBlock> </StatusBarItem> <StatusBarItem Grid.Column="2"> <ProgressBar Name="statusPG" Width="80" Height="18" IsEnabled="False" /> </StatusBarItem> <StatusBarItem Grid.Column="3"> <Button Name="statusB" IsCancel="True" IsEnabled="False">Cancel</Button> </StatusBarItem> </StatusBar> </DockPanel> </Window>

  Read the article

• Need to write at beginning of file with PHP

  - by Timothy

  I'm making this program and I'm trying to find out how to write data to the beginning of a file rather than the end. "a"/append only writes to the end, how can I make it write to the beginning? Because "r+" does it but overwrites the previous data. $datab = fopen('database.txt', "r+"); Here is my whole file: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>Facebook v0.1</title> <style type="text/css"> #bod{ margin:0 auto; width:800px; border:solid 2px black; } </style> </head> <body> <div id="bod"> <?php $fname = $_REQUEST['fname']; $lname = $_REQUEST['lname']; $comment = $_REQUEST['comment']; $datab = $_REQUEST['datab']; $gfile = $_REQUEST['gfile']; print <<<form <table border="2" style="margin:0 auto;"> <td> <form method="post" action=""> First Name : <input type ="text" name="fname" value=""> <br> Last Name : <input type ="text" name="lname" value=""> <br> Comment : <input type ="text" name="comment" value=""> <br> <input type ="submit" value="Submit"> </form> </td> </table> form; if((!empty($fname)) && (!empty($lname)) && (!empty($comment))){ $form = <<<come <table border='2' width='300px' style="margin:0 auto;"> <tr> <td> <span style="color:blue; font-weight:bold;"> $fname $lname : </span> $comment </td> </tr> </table> come; $datab = fopen('database.txt', "r+"); fputs($datab, $form); fclose($datab); }else if((empty($fname)) && (empty($lname)) && (empty($comment))){ print" please input data"; } // end table $datab = fopen('database.txt', "r"); while (!feof($datab)){ $gfile = fgets($datab); print "$gfile"; }// end of while ?> </div> </body> </html>

  Read the article

• screnshot in android

  - by ujjawal

  The following is the code I am using to take a screen shot using GLSurfaceView. But I dont know why the onDraw() method in the GLSurfaceView.Renderer Class is not being called. Please if some one can look at the code below and point out what am I doing wrong.`public class MainActivity extends Activity { private GLSurfaceView mGLView; int x,y,w,h; Display disp; /** Called when the activity is first created. */ @Override public void onCreate(Bundle icicle) { super.onCreate(icicle); // ToDo add your GUI initialization code here setContentView(R.layout.main); x=0; y=0; disp = getWindowManager().getDefaultDisplay(); w = disp.getWidth(); h = disp.getHeight(); mGLView = new ClearGLSurfaceView(this); } class ClearGLSurfaceView extends GLSurfaceView { public ClearGLSurfaceView(Context context) { super(context); setDebugFlags(DEBUG_CHECK_GL_ERROR | DEBUG_LOG_GL_CALLS); mRenderer = new ClearRenderer(); setRenderer(mRenderer); } ClearRenderer mRenderer; } class ClearRenderer implements GLSurfaceView.Renderer { public void onSurfaceCreated(GL10 gl, EGLConfig config) { // Do nothing special. } public void onSurfaceChanged(GL10 gl, int w, int h) { //gl.glViewport(0, 0, w, h); } public void onDrawFrame(GL10 gl) { //gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); int b[]=new int[w*(y+h)]; int bt[]=new int[w*h]; IntBuffer ib=IntBuffer.wrap(b); ib.position(0); gl.glReadPixels(x, 0, w, y+h, GL10.GL_RGBA, GL10.GL_UNSIGNED_BYTE, ib); for(int i=0, k=0; i<h; i++, k++) {//remember, that OpenGL bitmap is incompatible with Android bitmap //and so, some correction need. for(int j=0; j<w; j++) { int pix=b[i*w+j]; int pb=(pix>>16)&0xff; int pr=(pix<<16)&0x00ff0000; int pix1=(pix&0xff00ff00) | pr | pb; bt[(h-k-1)*w+j]=pix1; } } Bitmap bmp = Bitmap.createBitmap(bt, w, h,Bitmap.Config.ARGB_8888); try { File f = new File("/sdcard/testpicture.png"); f.createNewFile(); FileOutputStream fos=new FileOutputStream(f); bmp.compress(CompressFormat.PNG, 100, fos); try { fos.flush(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } try { fos.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } catch (FileNotFoundException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch(IOException e) { e.printStackTrace(); } } } } ` Please someone help me out. I have just started learning to work on android.

  Read the article

• Android fill ImageView from URL

  - by Luke Batley

  Hi i'm trying to add an image to an ImageView from a URL i have tried loading it as a bitmap but nothing is showing. so does anyone know what the best method to do this is or what i'm doing wrong? heres my code @Override protected void onCreate(Bundle savedInstanceState) { // TODO Auto-generated method stub super.onCreate(savedInstanceState); //Check Preferences which sets UI setContentView(R.layout.singlenews); TextView headerText = (TextView) findViewById(R.id.header_text); headerText.setText("Latest News"); PostTask posttask; posttask = new PostTask(); posttask.execute(); } public void loadNews(){ newsStr = getIntent().getStringExtra("singleNews"); try { JSONObject obj = new JSONObject(newsStr); content = obj.getString("content"); title = obj.getString("title"); fullName = obj.getString("fullname"); created = obj.getString("created"); NewsImageURL = obj.getString("image_primary"); tagline = obj.getString("tagline"); meta = "posted by: " + fullName + " " + created; URL aURL = new URL("NewsImageURL"); URLConnection conn = aURL.openConnection(); conn.connect(); InputStream is = conn.getInputStream(); /* Buffered is always good for a performance plus. */ BufferedInputStream bis = new BufferedInputStream(is); /* Decode url-data to a bitmap. */ bm = BitmapFactory.decodeStream(bis); bis.close(); is.close(); /* Apply the Bitmap to the ImageView that will be returned. */ Log.v("lc", "content=" + content); Log.v("lc", "title=" + title); Log.v("lc", "fullname=" + fullName); Log.v("lc", "created=" + created); Log.v("lc", "NewsImage=" + NewsImageURL); Log.v("lc", "Meta=" + meta); Log.v("lc", "tagline=" + tagline); } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } public class PostTask extends AsyncTask<Void, String, Boolean> { @Override protected Boolean doInBackground(Void... params) { boolean result = false; loadNews(); publishProgress("progress"); return result; } protected void onProgressUpdate(String... progress) { StringBuilder str = new StringBuilder(); for (int i = 1; i < progress.length; i++) { str.append(progress[i] + " "); } } @Override protected void onPostExecute(Boolean result) { super.onPostExecute(result); Log.v("BGThread", "begin fillin data"); fillData(); } } public void fillData(){ NewsView = LayoutInflater.from(getBaseContext()).inflate(R.layout.newsdetailact, null); TextView Title = (TextView) NewsView.findViewById(R.id.NewsTitle); Title.setText(title); TextView Tagline = (TextView) NewsView.findViewById(R.id.subtitle); Tagline.setText(tagline); TextView MetaData = (TextView) NewsView.findViewById(R.id.meta); MetaData.setText(meta); ImageView NewsImage = (ImageView)NewsView.findViewById(R.id.imageView2); NewsImage.setImageBitmap(bm); TextView MainContent = (TextView) NewsView.findViewById(R.id.maintext); MainContent.setText(content); Log.v("BGThread", "Filled results"); adapter = new MergeAdapter(); adapter.addView(NewsView); setListAdapter(adapter); } }

  Read the article

• Why is my program getting slower and slower ?

  - by RedWolf

  I'm using the program to send data from database to the Excel file . It works fine at the beginning and then becomes more and more slowly,finally it run out of the memory and the following error ocurrs: "java.lang.OutOfMemoryError: Java heap space...". The problem can be resolved by adding the jvm heap sapce.But the question is that it spends too much time to run out the program. After several minutes,it finished a loop with 4 seconds which can be finished with 0.5 seconds at the beginning . I can't found a solution to make it always run in a certain speed. Is it my code problem? Any clues on this? Here is the code: public void addAnswerRow(List<FinalUsers> finalUsersList,WritableWorkbook book){ if (finalUsersList.size() >0 ) { try { WritableSheet sheet = book.createSheet("Answer", 0); int colCount = 0; sheet.addCell(new Label(colCount++,0,"Number")); sheet.addCell(new Label(colCount++,0,"SchoolNumber")); sheet.addCell(new Label(colCount++,0,"District")); sheet.addCell(new Label(colCount++,0,"SchoolName")); sheet.setColumnView(1, 15); sheet.setColumnView(3, 25); List<Elements> elementsList = this.elementsManager.getObjectElementsByEduTypeAndQuestionnaireType(finalUsersList.get(0).getEducationType().getId(), this.getQuestionnaireByFinalUsersType(finalUsersList.get(0).getFinalUsersType().getId())); Collections.sort(elementsList, new Comparator<Elements>(){ public int compare(Elements o1, Elements o2) { for(int i=0; i< ( o1.getItemNO().length()>o2.getItemNO().length()? o2.getItemNO().length(): o1.getItemNO().length());i++){ if (CommonFun.isNumberic(o1.getItemNO().substring(0, o1.getItemNO().length()>3? 4: o1.getItemNO().length()-1)) && !CommonFun.isNumberic(o2.getItemNO().substring(0, o2.getItemNO().length()>3? 4: o2.getItemNO().length()-1))){ return 1; } if (!CommonFun.isNumberic(o1.getItemNO().substring(0, o1.getItemNO().length()>3? 4: o1.getItemNO().length()-1)) && CommonFun.isNumberic(o2.getItemNO().substring(0,o2.getItemNO().length()>3? 4:o2.getItemNO().length()-1))){ return -1; } if ( o1.getItemNO().charAt(i)!=o2.getItemNO().charAt(i) ){ return o1.getItemNO().charAt(i)-o2.getItemNO().charAt(i); } } return o1.getItemNO().length()> o2.getItemNO().length()? 1:-1; }}); for (Elements elements : elementsList){ sheet.addCell(new Label(colCount++,0,this.getTitlePre(finalUsersList.get(0).getFinalUsersType().getId(), finalUsersList.get(0).getEducationType().getId())+elements.getItemNO()+elements.getItem().getStem())); } int sheetRowCount =1; int sheetColCount =0; for(FinalUsers finalUsers : finalUsersList){ sheetColCount =0; sheet.addCell(new Label(sheetColCount++,sheetRowCount,String.valueOf(sheetRowCount))); sheet.addCell(new Label(sheetColCount++,sheetRowCount,finalUsers.getSchool().getSchoolNumber())); sheet.addCell(new Label(sheetColCount++,sheetRowCount,finalUsers.getSchool().getDistrict().getDistrictNumber().toString().trim())); sheet.addCell(new Label(sheetColCount++,sheetRowCount,finalUsers.getSchool().getName())); List<AnswerLog> answerLogList = this.answerLogManager.getAnswerLogByFinalUsers(finalUsers.getId()); Map<String,String> answerMap = new HashMap<String,String>(); for(AnswerLog answerLog :answerLogList ){ if (answerLog.getOptionsId() != null) { answerMap.put(answerLog.getElement().getItemNO(), this.getOptionsAnswer(answerLog.getOptionsId())); }else if (answerLog.getBlanks()!= null){ answerMap.put(answerLog.getElement().getItemNO(), answerLog.getBlanks()); }else{ answerMap.put(answerLog.getElement().getItemNO(), answerLog.getSubjectiveItemContent()); } } for (Elements elements : elementsList){ sheet.addCell(new Label(sheetColCount++,sheetRowCount,null==answerMap.get(elements.getItemNO())?"0":answerMap.get(elements.getItemNO()))); } sheetRowCount++; } book.write(); book.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (RowsExceededException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (WriteException e) { // TODO Auto-generated catch block e.printStackTrace(); } } }

  Read the article

• HTML CheckBox labels within a container are not displayed as expected

  - by Tiny

  The following HTML code attempts to display checkboxes inside a <div></div> container. <div style="overflow: auto; width: auto; display:block; max-height:130px; max-width:200px; background-color: #FFF; height: auto; border: 1px double #336699; padding-left: 2px;"> <label for="chk12" style='white-space: nowrap;'> <input type='checkbox' id="chk12" name='chk_colours' value="12" class='validate[required] text-input text'> <div style='background-color:#FF8C00; width: 180px;' title="darkorange">&nbsp;&nbsp;</div> </label> <label for="chk11" style='white-space: nowrap;'> <input type='checkbox' id="chk11" name='chk_colours' value="11" class='validate[required] text-input text'> <div style='background-color:#D9D919; width: 180px;' title="brightgold">&nbsp;&nbsp;</div> </label> <label for="chk10" style='white-space: nowrap;'> <input type='checkbox' id="chk10" name='chk_colours' value="10" class='validate[required] text-input text'> <div style='background-color:#76EE00; width: 180px;' title="chartreuse2">&nbsp;&nbsp;</div> </label> <label for="chk9" style='white-space: nowrap;'> <input type='checkbox' id="chk9" name='chk_colours' value="9" class='validate[required] text-input text'> <div style='background-color:#2E0854; width: 180px;' title="indigo">&nbsp;&nbsp;</div> </label> <label for="chk8" style='white-space: nowrap;'> <input type='checkbox' id="chk8" name='chk_colours' value="8" class='validate[required] text-input text'> <div style='background-color:#292929; width: 180px;' title="gray16">&nbsp;&nbsp;</div> </label> </div> What it displays can be visible in the following snap shot. It is seen that various colour stripes which are displayed using the following <div> tag <div style='background-color:#FF8C00; width: 180px;' title="darkorange">&nbsp;&nbsp</div> are displayed below their respective checkboxes which are expected to be displayed in a straight line even though I'm using the white-space: nowrap; style attribute. How to display each stripe along with its respective checkbox in a straight line? It was explained in one of my questions itself but in that question each checkbox had a text label in place of such colour stripes. Here it is. I tried to do as mentioned in the accepted answer of that question but to no avail in this case.

  Read the article

• Sqlite returns error

  - by ruruma

  I'm trying to implement loading data from database and put it into different views. But log cat returns error, that it cannot find "_id" column. Can somebody help me with this? SqlHelper Code public class FiboSqlHelper extends SQLiteOpenHelper { public static final String TABLE_FILMDB = "FiboFilmTop250"; public static final String COLUMN_ID = "_id"; private static final String DATABASE_NAME = "FiboFilmDb250.sqlite"; private static final int DATABASE_VERSION = 1; public static final String COLUMN_TITLE = "Title"; public static final String COLUMN_RATING = "Rating"; public static final String COLUMN_GENRE = "Genre"; public static final String COLUMN_TIME = "Time"; public static final String COLUMN_PREMDATE = "PremDate"; public static final String COLUMN_PLOT = "Plot"; private static final String DATABASE_CREATE = "create table "+TABLE_FILMDB+"("+COLUMN_ID +" integer primary key autoincrement, " +COLUMN_TITLE+" text not null "+COLUMN_RATING+" text not null "+COLUMN_GENRE+" text not null "+COLUMN_TIME+" text not null "+COLUMN_PREMDATE+" text not null "+COLUMN_PLOT+" "+"text not null)"; public FiboSqlHelper(Context context) { super(context, DATABASE_NAME, null, DATABASE_VERSION); // TODO Auto-generated constructor stub } @Override public void onCreate(SQLiteDatabase db) { // TODO Auto-generated method stub db.execSQL(DATABASE_CREATE); } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { // TODO Auto-generated method stub Log.w(FiboSqlHelper.class.getName(), "Upgrading database from version " + oldVersion + " to " + newVersion + ", which will destroy all old data"); db.execSQL("DROP TABLE IF EXISTS " + TABLE_FILMDB); onCreate(db); } }` SqlAdapterCode: public class FiboSqlAdapter { private SQLiteDatabase database; private FiboSqlHelper dbHelper; private String[] allColumns = {FiboSqlHelper.COLUMN_ID, FiboSqlHelper.COLUMN_TITLE, FiboSqlHelper.COLUMN_GENRE, FiboSqlHelper.COLUMN_PREMDATE, FiboSqlHelper.COLUMN_TIME, FiboSqlHelper.COLUMN_PLOT}; public FiboSqlAdapter (Context context){ dbHelper = new FiboSqlHelper(context); } public void open() throws SQLException { database = dbHelper.getWritableDatabase(); } public void close(){ dbHelper.close(); } public List<FilmDataEntity> getAllFilmData(){ List<FilmDataEntity> fDatas = new ArrayList<FilmDataEntity>(); Cursor cursor = database.query(FiboSqlHelper.TABLE_FILMDB, allColumns, null,null,null,null,null); cursor.moveToFirst(); while(!cursor.isAfterLast()){ FilmDataEntity fData = cursorToData(cursor); fDatas.add(fData); cursor.moveToNext(); } cursor.close(); return fDatas; } private FilmDataEntity cursorToData(Cursor cursor){ FilmDataEntity fData = new FilmDataEntity(); fData.setId(cursor.getLong(1)); fData.setTitle(cursor.getString(2)); fData.setRating(cursor.getString(6)); fData.setGenre(cursor.getString(4)); fData.setPremDate(cursor.getString(5)); fData.setShortcut(cursor.getString(8)); return fData; }} DataEntity: ` public class FilmDataEntity { private long id; private String title; private String rating; private String genre; private String premDate; private String shortcut; public String getShortcut() { return shortcut; } public void setShortcut(String shortcut) { this.shortcut = shortcut; } public String getGenre() { return genre; } public void setGenre(String genre) { this.genre = genre; } public String getPremDate() { return premDate; } public void setPremDate(String premDate) { this.premDate = premDate; } public String getTitle() { return title; } public void setTitle(String title) { this.title = title; } public String getRating() { return rating; } public void setRating(String rating) { this.rating = rating; } public long getId() { return id; } public void setId(long id) { this.id = id; } } Part from main activity: `List<FilmDataEntity> fE1; sqA = new FiboSqlAdapter(this); sqA.open(); fE1 = sqA.getAllFilmData(); `

  Read the article

• ASP.NET MVC Paging/Sorting/Filtering a list using ModelMetadata

  - by rajbk

  This post looks at how to control paging, sorting and filtering when displaying a list of data by specifying attributes in your Model using the ASP.NET MVC framework and the excellent MVCContrib library. It also shows how to hide/show columns and control the formatting of data using attributes.  This uses the Northwind database. A sample project is attached at the end of this post. Let’s start by looking at a class called ProductViewModel. The properties in the class are decorated with attributes. The OrderBy attribute tells the system that the Model can be sorted using that property. The SearchFilter attribute tells the system that filtering is allowed on that property. Filtering type is set by the  FilterType enum which currently supports Equals and Contains. The ScaffoldColumn property specifies if a column is hidden or not The DisplayFormat specifies how the data is formatted. public class ProductViewModel { [OrderBy(IsDefault = true)] [ScaffoldColumn(false)] public int? ProductID { get; set; }   [SearchFilter(FilterType.Contains)] [OrderBy] [DisplayName("Product Name")] public string ProductName { get; set; }   [OrderBy] [DisplayName("Unit Price")] [DisplayFormat(DataFormatString = "{0:c}")] public System.Nullable<decimal> UnitPrice { get; set; }   [DisplayName("Category Name")] public string CategoryName { get; set; }   [SearchFilter] [ScaffoldColumn(false)] public int? CategoryID { get; set; }   [SearchFilter] [ScaffoldColumn(false)] public int? SupplierID { get; set; }   [OrderBy] public bool Discontinued { get; set; } } Before we explore the code further, lets look at the UI.  The UI has a section for filtering the data. The column headers with links are sortable. Paging is also supported with the help of a pager row. The pager is rendered using the MVCContrib Pager component. The data is displayed using a customized version of the MVCContrib Grid component. The customization was done in order for the Grid to be aware of the attributes mentioned above. Now, let’s look at what happens when we perform actions on this page. The diagram below shows the process: The form on the page has its method set to “GET” therefore we see all the parameters in the query string. The query string is shown in blue above. This query gets routed to an action called Index with parameters of type ProductViewModel and PageSortOptions. The parameters in the query string get mapped to the input parameters using model binding. The ProductView object created has the information needed to filter data while the PageAndSorting object is used for paging and sorting the data. The last block in the figure above shows how the filtered and paged list is created. We receive a product list from our product repository (which is of type IQueryable) and first filter it by calliing the AsFiltered extension method passing in the productFilters object and then call the AsPagination extension method passing in the pageSort object. The AsFiltered extension method looks at the type of the filter instance passed in. It skips properties in the instance that do not have the SearchFilter attribute. For properties that have the SearchFilter attribute, it adds filter expression trees to filter against the IQueryable data. The AsPagination extension method looks at the type of the IQueryable and ensures that the column being sorted on has the OrderBy attribute. If it does not find one, it looks for the default sort field [OrderBy(IsDefault = true)]. It is required that at least one attribute in your model has the [OrderBy(IsDefault = true)]. This because a person could be performing paging without specifying an order by column. As you may recall the LINQ Skip method now requires that you call an OrderBy method before it. Therefore we need a default order by column to perform paging. The extension method adds a order expressoin tree to the IQueryable and calls the MVCContrib AsPagination extension method to page the data. Implementation Notes Auto Postback The search filter region auto performs a get request anytime the dropdown selection is changed. This is implemented using the following jQuery snippet $(document).ready(function () { $("#productSearch").change(function () { this.submit(); }); }); Strongly Typed View The code used in the Action method is shown below: public ActionResult Index(ProductViewModel productFilters, PageSortOptions pageSortOptions) { var productPagedList = productRepository.GetProductsProjected().AsFiltered(productFilters).AsPagination(pageSortOptions);   var productViewFilterContainer = new ProductViewFilterContainer(); productViewFilterContainer.Fill(productFilters.CategoryID, productFilters.SupplierID, productFilters.ProductName);   var gridSortOptions = new GridSortOptions { Column = pageSortOptions.Column, Direction = pageSortOptions.Direction };   var productListContainer = new ProductListContainerModel { ProductPagedList = productPagedList, ProductViewFilterContainer = productViewFilterContainer, GridSortOptions = gridSortOptions };   return View(productListContainer); } As you see above, the object that is returned to the view is of type ProductListContainerModel. This contains all the information need for the view to render the Search filter section (including dropdowns),  the Html.Pager (MVCContrib) and the Html.Grid (from MVCContrib). It also stores the state of the search filters so that they can recreate themselves when the page reloads (Viewstate, I miss you! :0)  The class diagram for the container class is shown below.   Custom MVCContrib Grid The MVCContrib grid default behavior was overridden so that it would auto generate the columns and format the columns based on the metadata and also make it aware of our custom attributes (see MetaDataGridModel in the sample code). The Grid ensures that the ShowForDisplay on the column is set to true This can also be set by the ScaffoldColumn attribute ref: http://bradwilson.typepad.com/blog/2009/10/aspnet-mvc-2-templates-part-2-modelmetadata.html) Column headers are set using the DisplayName attribute Column sorting is set using the OrderBy attribute. The data is formatted using the DisplayFormat attribute. Generic Extension methods for Sorting and Filtering The extension method AsFiltered takes in an IQueryable<T> and uses expression trees to query against the IQueryable data. The query is constructed using the Model metadata and the properties of the T filter (productFilters in our case). Properties in the Model that do not have the SearchFilter attribute are skipped when creating the filter expression tree.  It returns an IQueryable<T>. The extension method AsPagination takes in an IQuerable<T> and first ensures that the column being sorted on has the OrderBy attribute. If not, we look for the default OrderBy column ([OrderBy(IsDefault = true)]). We then build an expression tree to sort on this column. We finally hand off the call to the MVCContrib AsPagination which returns an IPagination<T>. This type as you can see in the class diagram above is passed to the view and used by the MVCContrib Grid and Pager components. Custom Provider To get the system to recognize our custom attributes, we create our MetadataProvider as mentioned in this article (http://bradwilson.typepad.com/blog/2010/01/why-you-dont-need-modelmetadataattributes.html) protected override ModelMetadata CreateMetadata(IEnumerable<Attribute> attributes, Type containerType, Func<object> modelAccessor, Type modelType, string propertyName) { ModelMetadata metadata = base.CreateMetadata(attributes, containerType, modelAccessor, modelType, propertyName);   SearchFilterAttribute searchFilterAttribute = attributes.OfType<SearchFilterAttribute>().FirstOrDefault(); if (searchFilterAttribute != null) { metadata.AdditionalValues.Add(Globals.SearchFilterAttributeKey, searchFilterAttribute); }   OrderByAttribute orderByAttribute = attributes.OfType<OrderByAttribute>().FirstOrDefault(); if (orderByAttribute != null) { metadata.AdditionalValues.Add(Globals.OrderByAttributeKey, orderByAttribute); }   return metadata; } We register our MetadataProvider in Global.asax.cs. protected void Application_Start() { AreaRegistration.RegisterAllAreas();   RegisterRoutes(RouteTable.Routes);   ModelMetadataProviders.Current = new MvcFlan.QueryModelMetaDataProvider(); } Bugs, Comments and Suggestions are welcome! You can download the sample code below. This code is purely experimental. Use at your own risk. Download Sample Code (VS 2010 RTM) MVCNorthwindSales.zip

  Read the article

• Using a WPF ListView as a DataGrid

  - by psheriff

  Many people like to view data in a grid format of rows and columns. WPF did not come with a data grid control that automatically creates rows and columns for you based on the object you pass it. However, the WPF Toolkit can be downloaded from CodePlex.com that does contain a DataGrid control. This DataGrid gives you the ability to pass it a DataTable or a Collection class and it will automatically figure out the columns or properties and create all the columns for you and display the data.The DataGrid control also supports editing and many other features that you might not always need. This means that the DataGrid does take a little more time to render the data. If you want to just display data (see Figure 1) in a grid format, then a ListView works quite well for this task. Of course, you will need to create the columns for the ListView, but with just a little generic code, you can create the columns on the fly just like the WPF Toolkit’s DataGrid. Figure 1: A List of Data using a ListView A Simple ListView ControlThe XAML below is what you would use to create the ListView shown in Figure 1. However, the problem with using XAML is you have to pre-define the columns. You cannot re-use this ListView except for “Product” data. <ListView x:Name="lstData"          ItemsSource="{Binding}">  <ListView.View>    <GridView>      <GridViewColumn Header="Product ID"                      Width="Auto"               DisplayMemberBinding="{Binding Path=ProductId}" />      <GridViewColumn Header="Product Name"                      Width="Auto"               DisplayMemberBinding="{Binding Path=ProductName}" />      <GridViewColumn Header="Price"                      Width="Auto"               DisplayMemberBinding="{Binding Path=Price}" />    </GridView>  </ListView.View></ListView> So, instead of creating the GridViewColumn’s in XAML, let’s learn to create them in code to create any amount of columns in a ListView. Create GridViewColumn’s From Data TableTo display multiple columns in a ListView control you need to set its View property to a GridView collection object. You add GridViewColumn objects to the GridView collection and assign the GridView to the View property. Each GridViewColumn object needs to be bound to a column or property name of the object that the ListView will be bound to. An ADO.NET DataTable object contains a collection of columns, and these columns have a ColumnName property which you use to bind to the GridViewColumn objects. Listing 1 shows a sample of reading and XML file into a DataSet object. After reading the data a GridView object is created. You can then loop through the DataTable columns collection and create a GridViewColumn object for each column in the DataTable. Notice the DisplayMemberBinding property is set to a new Binding to the ColumnName in the DataTable. C#private void FirstSample(){  // Read the data  DataSet ds = new DataSet();  ds.ReadXml(GetCurrentDirectory() + @"\Xml\Product.xml");    // Create the GridView  GridView gv = new GridView();   // Create the GridView Columns  foreach (DataColumn item in ds.Tables[0].Columns)  {    GridViewColumn gvc = new GridViewColumn();    gvc.DisplayMemberBinding = new Binding(item.ColumnName);    gvc.Header = item.ColumnName;    gvc.Width = Double.NaN;    gv.Columns.Add(gvc);  }   // Setup the GridView Columns  lstData.View = gv;  // Display the Data  lstData.DataContext = ds.Tables[0];} VB.NETPrivate Sub FirstSample()  ' Read the data  Dim ds As New DataSet()  ds.ReadXml(GetCurrentDirectory() & "\Xml\Product.xml")   ' Create the GridView  Dim gv As New GridView()   ' Create the GridView Columns  For Each item As DataColumn In ds.Tables(0).Columns    Dim gvc As New GridViewColumn()    gvc.DisplayMemberBinding = New Binding(item.ColumnName)    gvc.Header = item.ColumnName    gvc.Width = [Double].NaN    gv.Columns.Add(gvc)  Next   ' Setup the GridView Columns  lstData.View = gv  ' Display the Data  lstData.DataContext = ds.Tables(0)End SubListing 1: Loop through the DataTable columns collection to create GridViewColumn objects A Generic Method for Creating a GridViewInstead of having to write the code shown in Listing 1 for each ListView you wish to create, you can create a generic method that given any DataTable will return a GridView column collection. Listing 2 shows how you can simplify the code in Listing 1 by setting up a class called WPFListViewCommon and create a method called CreateGridViewColumns that returns your GridView. C#private void DataTableSample(){  // Read the data  DataSet ds = new DataSet();  ds.ReadXml(GetCurrentDirectory() + @"\Xml\Product.xml");   // Setup the GridView Columns  lstData.View =      WPFListViewCommon.CreateGridViewColumns(ds.Tables[0]);  lstData.DataContext = ds.Tables[0];} VB.NETPrivate Sub DataTableSample()  ' Read the data  Dim ds As New DataSet()  ds.ReadXml(GetCurrentDirectory() & "\Xml\Product.xml")   ' Setup the GridView Columns  lstData.View = _      WPFListViewCommon.CreateGridViewColumns(ds.Tables(0))  lstData.DataContext = ds.Tables(0)End SubListing 2: Call a generic method to create GridViewColumns. The CreateGridViewColumns MethodThe CreateGridViewColumns method will take a DataTable as a parameter and create a GridView object with a GridViewColumn object in its collection for each column in your DataTable. C#public static GridView CreateGridViewColumns(DataTable dt){  // Create the GridView  GridView gv = new GridView();  gv.AllowsColumnReorder = true;   // Create the GridView Columns  foreach (DataColumn item in dt.Columns)  {    GridViewColumn gvc = new GridViewColumn();    gvc.DisplayMemberBinding = new Binding(item.ColumnName);    gvc.Header = item.ColumnName;    gvc.Width = Double.NaN;    gv.Columns.Add(gvc);  }   return gv;} VB.NETPublic Shared Function CreateGridViewColumns _  (ByVal dt As DataTable) As GridView  ' Create the GridView  Dim gv As New GridView()  gv.AllowsColumnReorder = True   ' Create the GridView Columns  For Each item As DataColumn In dt.Columns    Dim gvc As New GridViewColumn()    gvc.DisplayMemberBinding = New Binding(item.ColumnName)    gvc.Header = item.ColumnName    gvc.Width = [Double].NaN    gv.Columns.Add(gvc)  Next   Return gvEnd FunctionListing 3: The CreateGridViewColumns method takes a DataTable and creates GridViewColumn objects in a GridView. By separating this method out into a class you can call this method anytime you want to create a ListView with a collection of columns from a DataTable. SummaryIn this blog you learned how to create a ListView that acts like a DataGrid. You are able to use a DataTable as both the source of the data, and for creating the columns for the ListView. In the next blog entry you will learn how to use the same technique, but for Collection classes. NOTE: You can download the complete sample code (in both VB and C#) at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "WPF ListView as a DataGrid" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free eBook on "Fundamentals of N-Tier".

  Read the article

• Access violation in DirectX OMSetRenderTargets

  - by IDWMaster

  I receive the following error (Unhandled exception at 0x527DAE81 (d3d11_1sdklayers.dll) in Lesson2.Triangles.exe: 0xC0000005: Access violation reading location 0x00000000) when running the Triangle sample application for DirectX 11 in D3D_FEATURE_LEVEL_9_1. This error occurs at the OMSetRenderTargets function, as shown below, and does not happen if I remove that function from the program (but then, the screen is blue, and does not render the triangle) //// THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF //// ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO //// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A //// PARTICULAR PURPOSE. //// //// Copyright (c) Microsoft Corporation. All rights reserved #include #include #include "DirectXSample.h" #include "BasicMath.h" #include "BasicReaderWriter.h" using namespace Microsoft::WRL; using namespace Windows::UI::Core; using namespace Windows::Foundation; using namespace Windows::ApplicationModel::Core; using namespace Windows::ApplicationModel::Infrastructure; // This class defines the application as a whole. ref class Direct3DTutorialViewProvider : public IViewProvider { private: CoreWindow^ m_window; ComPtr m_swapChain; ComPtr m_d3dDevice; ComPtr m_d3dDeviceContext; ComPtr m_renderTargetView; public: // This method is called on application launch. void Initialize( _In_ CoreWindow^ window, _In_ CoreApplicationView^ applicationView ) { m_window = window; } // This method is called after Initialize. void Load(_In_ Platform::String^ entryPoint) { } // This method is called after Load. void Run() { // First, create the Direct3D device. // This flag is required in order to enable compatibility with Direct2D. UINT creationFlags = D3D11_CREATE_DEVICE_BGRA_SUPPORT; #if defined(_DEBUG) // If the project is in a debug build, enable debugging via SDK Layers with this flag. creationFlags |= D3D11_CREATE_DEVICE_DEBUG; #endif // This array defines the ordering of feature levels that D3D should attempt to create. D3D_FEATURE_LEVEL featureLevels[] = { D3D_FEATURE_LEVEL_11_1, D3D_FEATURE_LEVEL_11_0, D3D_FEATURE_LEVEL_10_1, D3D_FEATURE_LEVEL_10_0, D3D_FEATURE_LEVEL_9_3, D3D_FEATURE_LEVEL_9_1 }; ComPtr d3dDevice; ComPtr d3dDeviceContext; DX::ThrowIfFailed( D3D11CreateDevice( nullptr, // specify nullptr to use the default adapter D3D_DRIVER_TYPE_HARDWARE, nullptr, // leave as nullptr if hardware is used creationFlags, // optionally set debug and Direct2D compatibility flags featureLevels, ARRAYSIZE(featureLevels), D3D11_SDK_VERSION, // always set this to D3D11_SDK_VERSION &d3dDevice, nullptr, &d3dDeviceContext ) ); // Retrieve the Direct3D 11.1 interfaces. DX::ThrowIfFailed( d3dDevice.As(&m_d3dDevice) ); DX::ThrowIfFailed( d3dDeviceContext.As(&m_d3dDeviceContext) ); // After the D3D device is created, create additional application resources. CreateWindowSizeDependentResources(); // Create a Basic Reader-Writer class to load data from disk. This class is examined // in the Resource Loading sample. BasicReaderWriter^ reader = ref new BasicReaderWriter(); // Load the raw vertex shader bytecode from disk and create a vertex shader with it. auto vertexShaderBytecode = reader-ReadData("SimpleVertexShader.cso"); ComPtr vertexShader; DX::ThrowIfFailed( m_d3dDevice-CreateVertexShader( vertexShaderBytecode-Data, vertexShaderBytecode-Length, nullptr, &vertexShader ) ); // Create an input layout that matches the layout defined in the vertex shader code. // For this lesson, this is simply a float2 vector defining the vertex position. const D3D11_INPUT_ELEMENT_DESC basicVertexLayoutDesc[] = { { "POSITION", 0, DXGI_FORMAT_R32G32_FLOAT, 0, 0, D3D11_INPUT_PER_VERTEX_DATA, 0 }, }; ComPtr inputLayout; DX::ThrowIfFailed( m_d3dDevice-CreateInputLayout( basicVertexLayoutDesc, ARRAYSIZE(basicVertexLayoutDesc), vertexShaderBytecode-Data, vertexShaderBytecode-Length, &inputLayout ) ); // Load the raw pixel shader bytecode from disk and create a pixel shader with it. auto pixelShaderBytecode = reader-ReadData("SimplePixelShader.cso"); ComPtr pixelShader; DX::ThrowIfFailed( m_d3dDevice-CreatePixelShader( pixelShaderBytecode-Data, pixelShaderBytecode-Length, nullptr, &pixelShader ) ); // Create vertex and index buffers that define a simple triangle. float3 triangleVertices[] = { float3(-0.5f, -0.5f,13.5f), float3( 0.0f, 0.5f,0), float3( 0.5f, -0.5f,0), }; D3D11_BUFFER_DESC vertexBufferDesc = {0}; vertexBufferDesc.ByteWidth = sizeof(float3) * ARRAYSIZE(triangleVertices); vertexBufferDesc.Usage = D3D11_USAGE_DEFAULT; vertexBufferDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER; vertexBufferDesc.CPUAccessFlags = 0; vertexBufferDesc.MiscFlags = 0; vertexBufferDesc.StructureByteStride = 0; D3D11_SUBRESOURCE_DATA vertexBufferData; vertexBufferData.pSysMem = triangleVertices; vertexBufferData.SysMemPitch = 0; vertexBufferData.SysMemSlicePitch = 0; ComPtr vertexBuffer; DX::ThrowIfFailed( m_d3dDevice-CreateBuffer( &vertexBufferDesc, &vertexBufferData, &vertexBuffer ) ); // Once all D3D resources are created, configure the application window. // Allow the application to respond when the window size changes. m_window-SizeChanged += ref new TypedEventHandler( this, &Direct3DTutorialViewProvider::OnWindowSizeChanged ); // Specify the cursor type as the standard arrow cursor. m_window-PointerCursor = ref new CoreCursor(CoreCursorType::Arrow, 0); // Activate the application window, making it visible and enabling it to receive events. m_window-Activate(); // Enter the render loop. Note that tailored applications should never exit. while (true) { // Process events incoming to the window. m_window-Dispatcher-ProcessEvents(CoreProcessEventsOption::ProcessAllIfPresent); // Specify the render target we created as the output target. ID3D11RenderTargetView* targets[1] = {m_renderTargetView.Get()}; m_d3dDeviceContext-OMSetRenderTargets( 1, targets, NULL // use no depth stencil ); // Clear the render target to a solid color. const float clearColor[4] = { 0.071f, 0.04f, 0.561f, 1.0f }; //Code fails here m_d3dDeviceContext-ClearRenderTargetView( m_renderTargetView.Get(), clearColor ); m_d3dDeviceContext-IASetInputLayout(inputLayout.Get()); // Set the vertex and index buffers, and specify the way they define geometry. UINT stride = sizeof(float3); UINT offset = 0; m_d3dDeviceContext-IASetVertexBuffers( 0, 1, vertexBuffer.GetAddressOf(), &stride, &offset ); m_d3dDeviceContext-IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_TRIANGLELIST); // Set the vertex and pixel shader stage state. m_d3dDeviceContext-VSSetShader( vertexShader.Get(), nullptr, 0 ); m_d3dDeviceContext-PSSetShader( pixelShader.Get(), nullptr, 0 ); // Draw the cube. m_d3dDeviceContext-Draw(3,0); // Present the rendered image to the window. Because the maximum frame latency is set to 1, // the render loop will generally be throttled to the screen refresh rate, typically around // 60Hz, by sleeping the application on Present until the screen is refreshed. DX::ThrowIfFailed( m_swapChain-Present(1, 0) ); } } // This method is called before the application exits. void Uninitialize() { } private: // This method is called whenever the application window size changes. void OnWindowSizeChanged( _In_ CoreWindow^ sender, _In_ WindowSizeChangedEventArgs^ args ) { m_renderTargetView = nullptr; CreateWindowSizeDependentResources(); } // This method creates all application resources that depend on // the application window size. It is called at app initialization, // and whenever the application window size changes. void CreateWindowSizeDependentResources() { if (m_swapChain != nullptr) { // If the swap chain already exists, resize it. DX::ThrowIfFailed( m_swapChain-ResizeBuffers( 2, 0, 0, DXGI_FORMAT_R8G8B8A8_UNORM, 0 ) ); } else { // If the swap chain does not exist, create it. DXGI_SWAP_CHAIN_DESC1 swapChainDesc = {0}; swapChainDesc.Stereo = false; swapChainDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; swapChainDesc.Scaling = DXGI_SCALING_NONE; swapChainDesc.Flags = 0; // Use automatic sizing. swapChainDesc.Width = 0; swapChainDesc.Height = 0; // This is the most common swap chain format. swapChainDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; // Don't use multi-sampling. swapChainDesc.SampleDesc.Count = 1; swapChainDesc.SampleDesc.Quality = 0; // Use two buffers to enable flip effect. swapChainDesc.BufferCount = 2; // We recommend using this swap effect for all applications. swapChainDesc.SwapEffect = DXGI_SWAP_EFFECT_FLIP_SEQUENTIAL; // Once the swap chain description is configured, it must be // created on the same adapter as the existing D3D Device. // First, retrieve the underlying DXGI Device from the D3D Device. ComPtr dxgiDevice; DX::ThrowIfFailed( m_d3dDevice.As(&dxgiDevice) ); // Ensure that DXGI does not queue more than one frame at a time. This both reduces // latency and ensures that the application will only render after each VSync, minimizing // power consumption. DX::ThrowIfFailed( dxgiDevice-SetMaximumFrameLatency(1) ); // Next, get the parent factory from the DXGI Device. ComPtr dxgiAdapter; DX::ThrowIfFailed( dxgiDevice-GetAdapter(&dxgiAdapter) ); ComPtr dxgiFactory; DX::ThrowIfFailed( dxgiAdapter-GetParent( __uuidof(IDXGIFactory2), &dxgiFactory ) ); // Finally, create the swap chain. DX::ThrowIfFailed( dxgiFactory-CreateSwapChainForImmersiveWindow( m_d3dDevice.Get(), DX::GetIUnknown(m_window), &swapChainDesc, nullptr, // allow on all displays &m_swapChain ) ); } // Once the swap chain is created, create a render target view. This will // allow Direct3D to render graphics to the window. ComPtr backBuffer; DX::ThrowIfFailed( m_swapChain-GetBuffer( 0, __uuidof(ID3D11Texture2D), &backBuffer ) ); DX::ThrowIfFailed( m_d3dDevice-CreateRenderTargetView( backBuffer.Get(), nullptr, &m_renderTargetView ) ); // After the render target view is created, specify that the viewport, // which describes what portion of the window to draw to, should cover // the entire window. D3D11_TEXTURE2D_DESC backBufferDesc = {0}; backBuffer-GetDesc(&backBufferDesc); D3D11_VIEWPORT viewport; viewport.TopLeftX = 0.0f; viewport.TopLeftY = 0.0f; viewport.Width = static_cast(backBufferDesc.Width); viewport.Height = static_cast(backBufferDesc.Height); viewport.MinDepth = D3D11_MIN_DEPTH; viewport.MaxDepth = D3D11_MAX_DEPTH; m_d3dDeviceContext-RSSetViewports(1, &viewport); } }; // This class defines how to create the custom View Provider defined above. ref class Direct3DTutorialViewProviderFactory : IViewProviderFactory { public: IViewProvider^ CreateViewProvider() { return ref new Direct3DTutorialViewProvider(); } }; [Platform::MTAThread] int main(array^) { auto viewProviderFactory = ref new Direct3DTutorialViewProviderFactory(); Windows::ApplicationModel::Core::CoreApplication::Run(viewProviderFactory); return 0; }

  Read the article

• Internationalize WebCenter Portal - Content Presenter

  - by Stefan Krantz

  Lately we have been involved in engagements where internationalization has been holding the project back from success. In this post we are going to explain how to get Content Presenter and its editorials to comply with the current selected locale for the WebCenter Portal session. As you probably know by now WebCenter Portal leverages the Localization support from Java Server Faces (JSF), in this post we will assume that the localization is controlled and enforced by switching the current browsers locale between English and Spanish. There is two main scenarios in internationalization of a content enabled pages, since Content Presenter offers both presentation of information as well as contribution of information, in this post we will look at how to enable seamless integration of correct localized version of the back end content file and how to enable the editor/author to edit the correct localized version of the file based on the current browser locale. Solution Scenario 1 - Localization aware content presentation Due to the amount of steps required to implement the enclosed solution proposal I have decided to share the solution with you in group components for each facet of the solution. If you want to get more details on each step, you can review the enclosed components. This post will guide you through the steps of enabling each component and what it enables/changes in each section of the system. Enable Content Presenter Customization By leveraging a predictable naming convention of the data files used to hold the content for the Content Presenter instance we can easily develop a component that will dynamically switch the name out before presenting the information. The naming convention we have leverage is the industry best practice by having a shared identifier as prefix (ContentABC) and a language enabled suffix (_EN) (_ES). So the assumption is that each file pair in above example should look like following:- English version - (ContentABC_EN)- Spanish version - (ContentABC_ES) Based on above theory we can now easily regardless of the primary version assigned to the content presenter instance switch the language out by using the localization support from JSF. Below java bean (oracle.webcenter.doclib.internal.view.presenter.NLSHelperBean) is enclosed in the customization project available for download at the bottom of the post: 1: public static final String CP_D_DOCNAME_FORMAT = "%s_%s"; 2: public static final int CP_UNIQUE_ID_INDEX = 0; 3: private ContentPresenter presenter = null; 4:   5:   6: public NLSHelperBean() { 7: super(); 8: } 9:   10: /** 11: * This method updates the configuration for the pageFlowScope to have the correct datafile 12: * for the current Locale 13: */ 14: public void initLocaleForDataFile() { 15: String dataFile = null; 16: // Checking that state of presenter is present, also make sure the item is eligible for localization by locating the "_" in the name 17: if(presenter.getConfiguration().getDatasource() != null && 18: presenter.getConfiguration().getDatasource().isNodeDatasource() && 19: presenter.getConfiguration().getDatasource().getNodeIdDatasource() != null && 20: !presenter.getConfiguration().getDatasource().getNodeIdDatasource().equals("") && 21: presenter.getConfiguration().getDatasource().getNodeIdDatasource().indexOf("_") > 0) { 22: dataFile = presenter.getConfiguration().getDatasource().getNodeIdDatasource(); 23: FacesContext fc = FacesContext.getCurrentInstance(); 24: //Leveraging the current faces contenxt to get current localization language 25: String currentLocale = fc.getViewRoot().getLocale().getLanguage().toUpperCase(); 26: String newDataFile = dataFile; 27: String [] uniqueIdArr = dataFile.split("_"); 28: if(uniqueIdArr.length > 0) { 29: newDataFile = String.format(CP_D_DOCNAME_FORMAT, uniqueIdArr[CP_UNIQUE_ID_INDEX], currentLocale); 30: } 31: //Replacing the current Node datasource with localized datafile. 32: presenter.getConfiguration().getDatasource().setNodeIdDatasource(newDataFile); 33: } 34: } With this bean code available to our WebCenter Portal implementation we can start the next step, by overriding the standard behavior in content presenter by applying a MDS Taskflow customization to the content presenter taskflow, following taskflow customization has been applied to the customization project attached to this post:- Library: WebCenter Document Library Service View- Path: oracle.webcenter.doclib.view.jsf.taskflows.presenter- File: contentPresenter.xml Changes made in above customization view:1. A new method invocation activity has been added (initLocaleForDataFile)2. The method invocation invokes the new NLSHelperBean3. The default activity is moved to the new Method invocation (initLocaleForDataFile)4. The outcome from the method invocation goes to determine-navigation (original default activity) The above changes concludes the presentation modification to support a compatible localization scenario for a content driven page. In addition this customization do not limit or disables the out of the box capabilities of WebCenter Portal. Steps to enable above customization Start JDeveloper and open your WebCenter Portal Application Select "Open Project" and include the extracted project you downloaded (CPNLSCustomizations.zip) Make sure the build out put from CPNLSCustomizations project is a dependency to your Portal project Deploy your Portal Application to your WC_CustomPortal managed server Make sure your naming convention of the two data files follow above recommendation Example result of the solution: Solution Scenario 2 - Localization aware content creation and authoring As you could see from Solution Scenario 1 we require the naming convention to be strictly followed, this means in the hands of a user with limited technology knowledge this can be one of the failing links in this solutions. Therefore I strongly recommend that you also follow this part since this will eliminate this risk and also increase the editors/authors usability with a magnitude. The current WebCenter Portal Architecture leverages WebCenter Content today to maintain, publish and manage content, therefore we need to make few efforts in making sure this part of the architecture is on board with our new naming practice and also simplifies the creation of content for our end users. As you probably remember the naming convention required a prefix to be common so I propose we enable a new component that help you auto name the content items dDocName (this means that the readable title can still be in a human readable format). The new component (WCP-LocalizationSupport.zip) built for this scenario will enable a couple of things: 1. A new service where a sequential number can be generate on request - service name: GET_WCP_LOCALE_CONTENTID 2. The content presenter is leveraging a specific function when launching the content creation wizard from within Content Presenter. Assumption is that users will create the content by clicking "Create Web Content" button. When clicking the button the wizard opened is actually running in side of WebCenter Content server, file executed (contentwizard.hcsp). This file uses JSON commands that will generate operations in the content server, I have extend this file to create two identical data files instead of one.- First it creates the English version by leveraging the new Service and a Global Rule to set the dDocName on the original check in screen, this global rule is available in a configuration package attached to this blog (NLSContentProfileRule.zip)- Secondly we run a set of JSON javascripts to create the Spanish version with the same details except for the name where we replace the suffix with (_ES)- Then content creation wizard ends with its out of the box behavior and assigns the Content Presenter instance the English versionSee Javascript markup below - this can be changed in the (WCP-LocalizationSupport.zip/component/WCP-LocalizationSupport/publish/webcenter) 1: //---------------------------------------A-TEAM--------------------------------------- 2: WCM.ContentWizard.CheckinContentPage.OnCheckinComplete = function(returnParams) 3: { 4: var callback = WCM.ContentWizard.CheckinContentPage.checkinCompleteCallback; 5: WCM.ContentWizard.ChooseContentPage.OnSelectionComplete(returnParams, callback); 6: // Load latest DOC_INFO_SIMPLE 7: var cgiPath = DOCLIB.config.httpCgiPath; 8: var jsonBinder = new WCM.Idc.JSONBinder(); 9: jsonBinder.SetLocalDataValue('IdcService', 'DOC_INFO_SIMPLE'); 10: jsonBinder.SetLocalDataValue('dID', returnParams.dID); 11: jsonBinder.Send(cgiPath, $CB(this, function(http) { 12: var ret = http.GetResponseText(); 13: var binder = new WCM.Idc.JSONBinder(ret); 14: var dDocName = binder.GetResultSetValue('DOC_INFO', 'dDocName', 0); 15: if(dDocName.indexOf("_") > 0){ 16: var ssBinder = new WCM.Idc.JSONBinder(); 17: ssBinder.SetLocalDataValue('IdcService', 'SS_CHECKIN_NEW'); 18: //Additional Localization dDocName generated 19: ssBinder.SetLocalDataValue('dDocName', getLocalizedDocName(dDocName, "es")); 20: ssBinder.SetLocalDataValue('primaryFile', 'default.xml'); 21: ssBinder.SetLocalDataValue('ssDefaultDocumentToken', 'SSContributorDataFile'); 22:   23: for(var n = 0 ; n < binder.GetResultSetFields('DOC_INFO').length ; n++) { 24: var field = binder.GetResultSetFields('DOC_INFO')[n]; 25: if(field != 'dID' && 26: field != 'dDocName' && 27: field != 'dID' && 28: field != 'dReleaseState' && 29: field != 'dRevClassID' && 30: field != 'dRevisionID' && 31: field != 'dRevLabel') { 32: ssBinder.SetLocalDataValue(field, binder.GetResultSetValue('DOC_INFO', field, 0)); 33: } 34: } 35: ssBinder.Send(cgiPath, $CB(this, function(http) {})); 36: } 37: })); 38: } 39:   40: //Support function to create localized dDocNames 41: function getLocalizedDocName(dDocName, lang) { 42: var result = dDocName.replace("_EN", ("_" + lang)); 43: return result; 44: } 45: //---------------------------------------A-TEAM--------------------------------------- 3. By applying the enclosed NLSContentProfileRule.zip, the check in screen for DataFile creation will have auto naming enabled with localization suffix (default is English)You can change the default language by updating the GlobalNlsRule and assign preferred prefix.See Rule markup for dDocName field below: <$executeService("GET_WCP_LOCALE_CONTENTID")$><$dprDefaultValue=WCP_LOCALE.LocaleContentId & "_EN"$> Steps to enable above extensions and configurations Install WebCenter Component (WCP-LocalizationSupport.zip), via the AdminServer in WebCenter Content Administration menus Enable the component and restart the content server Apply the configuration bundle to enable the new Global Rule (GlobalNlsRule), via the WebCenter Content Administration/Config Migration Admin New Content Creation Experience Result Content EditingContent editing will by default be enabled for authoring in the current select locale since the content file is selected by (Solution Scenario 1), this means that a user can switch his browser locale and then get the editing experience adaptable to the current selected locale. NotesA-Team are planning to post a solution on how to inline switch the locale of the WebCenter Portal Session, so the Content Presenter, Navigation Model and other Face related features are localized accordingly. Content Presenter examples used in this post is an extension to following post:https://blogs.oracle.com/ATEAM_WEBCENTER/entry/enable_content_editing_of_iterative Downloads CPNLSCustomizations.zip - WebCenter Portal, Content Presenter Customization https://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/CPNLSCustomizations.zip WCP-LocalizationSupport.zip - WebCenter Content, Extension Component to enable localization creation of files with compliant auto naminghttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/WCP-LocalizationSupport.zip NLSContentProfileRule.zip - WebCenter Content, Configuration Update Bundle to enable Global rule for new check in naming of data fileshttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/NLSContentProfileRule.zip

  Read the article

• Stream Media and Live TV Across the Internet with Orb

  - by DigitalGeekery

  Looking for a way to stream your media collection across the Internet? Or perhaps watch and record TV remotely? Today we are going to look at how to do all that and more with Orb. Requirements Windows XP / Vista / 7 or Intel based Mac w/ OS X 10.5 or later. 1 GB RAM or more Pentium 4 2.4 GHz or higher / AMD Athlon 3200+ Broadband connections TV Tuner for streaming and recording live TV (optional) Note: Slower internet connections may result in stuttering during playback. Installation and Setup Download and install Orb on your home computer. (Download link below) You’ll want to take the defaults for the initial portion of the install. When we get to the Orb Account setup portion of the install is when we will have to enter information and make some decisions. Choose your language and click Next. We’ll need to create and user account and password. A valid email address is required as we’ll need to confirm the account later. Click Next.   Now you’ll want to choose your media sources. Orb will automatically look for folders that may contain media files. You can add or remove folders click on the (+) or (-) buttons. To remove a folder, click on it once to select it from the list and then click the minus (-) button. To add a folder, click the plus (+) button and browse for the folder. You can add local folders as well as shared folders from networked computers and USB attached storage. Note: Both the host computer running Orb and the networked computer will need to be running to access shared network folders remotely. When you’ve selected all your media files, click Next. Orb will proceed to index your media files… When the indexing is complete, click Next. Orb TV Setup Note: Streaming Live TV to Macs is not currently supported. If you have a TV tuner card connected to your PC, you can opt to configure Orb to stream live or recorded TV. Click Next  to configure TV. Or, choose Skip if you don’t wish to configure Orb for TV.   If you have a Digital tuner card, type in your Zip Code and click Get List to pull your channel listings. Select a TV provider from the list and click Next. If not, click Skip.   You can select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Next choose an analog provider, if necessary, and click Next.   Select “Yes” or “No” for a set top box and click Next. Just as we did with the Digital tuner, select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Now we’re finished with the setup. Click Close. Accessing your Media Remotely Media files are accessed through a web-based interface. Before we go any further, however, we’ll need to confirm our username and password. Check your inbox for an email from Orb Networks. Click the enclosed confirmation link. You’ll be prompted to enter the username and password you selected in your browser then click Next.   Your account will be confirmed. Now, we’re ready to enjoy our media remotely. To get started, point your browser to the MyCast website from your remote computer. (See link below) Enter your credentials and click Log In. Once logged in, you’ll be presented with the MyCast Home screen. By default you’ll see a handful of “channels” such as a TV program guide, random audio and photos, video favorites, and weather. You can add, remove, or customize channels. To add additional channels, click on Add Channels at the top right…   …and select from the dropdown list. To access your full media libraries, click Open Application at the top left and select from one of the options. Live and Recorded TV If you have a TV tuner card you configured for Orb, you’ll see your program guide on the TV / Webcams screen. To watch or record a show, click on the program listing to bring up a detail box. Then click the red button to record, or the green button to play. When recording a show, you’ll see a pulsating red icon at the top right of the listing in the program guide. If you want to watch Live TV, you may be prompted to choose your media player, depending on your browser and settings. Playback should begin shortly.   Note for Windows Media Center Users If you try to stream live TV in Orb while Windows Media Center is running on your PC, you’ll get an error message. Click the Stop MediaCenter button and then try again.   Audio On the Audio screen, you’ll find your music files indexed by genre, artist, and album. You can play a selection by clicking once and then clicking the green play button, or by simply double-clicking.   Playback will begin in the default media player for the streaming format.   Video Video works essentially the same as audio. Click on a selection and press the green play button, or double-click on the video title. Video playback will begin in the default media player for the streaming format.   Streaming Formats You can change the default streaming format in the control panel settings. To access the Control Panel, click on Open Applications  and select Control Panel. You can also click Settings at the top right.   Select General from the drop down list and then click on the Streaming Formats tab. You are provided four options. Flash, Windows Media, .SDP, and .PLS.   Creating Playlists To create playlists, drag and drop your media title to the playlist work area on the right, or click Add to playlist on the top menu. Click Save when finished.    Sharing your Media Orb allows you to share media playlists across the Internet with friends and family. There are a few ways to accomplish this. We’ll start by click the Share button at the bottom of the playlist work area after you’ve compiled your playlist. You’ll be prompted to choose a method by which to share your playlist. You’ll have the option to share your playlist publicly or privately. You can share publically through links, blogs, or on your Orb public profile.  By choosing the Public Profile option, Orb will automatically create a profile page for you with a URL like http://public.orb.com/username that anyone can easily access on the Internet. The private sharing option allows you to invite friends by email and requires recipients to register with Orb. You can also give your playlist a custom name, or accept the auto-generated title. Click OK when finished. Users who visit your public profile will be able to view and stream any of your shared playlists to their computer or supported device.   Portable Media Devices and Smartphones Orb can stream media to many portable devices and 3G phones. Streaming audio is supported on the iPhone and iPod Touch through the Safari browser. However, video and live TV streaming requires the Orb Live iPhone App.  Orb Live is available in the App store for $9.99. To stream media to your portable device, go to the MyCast website in your mobile browser and login. Browse for your media or playlist. Make a selection and play the media. Playback will begin. We found streaming music to both the Droid and the iPhone to work quite nicely. Video playback on the Droid, however, left a bit to be desired. The video looked good, but the audio tended to be out of sync. System Tray Control Panel By default Orb runs in the system tray on start up. To access the System Tray Control Panel, right-click on the Orb icon in the system tray and select Control Panel. Login with your Orb username and  password and click OK.   From here you can add or remove media sources, add manage accounts, change your password, and more. If you’d rather not run Orb on Startup, click the General icon.   Unselect the checkbox next to Start Orb when the system starts. Conclusion It may seem like a lot of steps, but getting Orb up and running isn’t terribly difficult. Orb is available for both Windows and Intel based Macs. It also supports streaming to many Game Consoles such as the Wii, PS3, and XBox 360. If you are running Windows 7 on multiple computers, you may want to check out our write-up on how to stream music and video over the Internet with Windows Media Player 12. Downloads Download Orb Logon to MyCast Similar Articles Productive Geek Tips Stream Music and Video Over the Internet with Windows Media Player 12Enable Media Streaming in Windows Home Server to Windows Media PlayerStream Media from Windows 7 to XP with VLC Media PlayerShare Digital Media With Other Computers on a Home Network with Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

  Read the article

• Using Oracle Enterprise Manager Ops Center to Update Solaris via Live Upgrade

  - by LeonShaner

  Introduction: This Oracle Enterprise Manager Ops Center blog entry provides tips for using Ops Center to update Solaris using Live Upgrade on Solaris 10 and Boot Environments on Solaris 11. Why use Live Upgrade? Live Upgrade (LU) can significantly reduce downtime associated with patching Live Upgrade avoids dropping to single-user mode for long periods of time during patching Live Upgrade relies on an Alternate Boot Environment (ABE)/(BE), which is patched while in multi-user mode; thereby allowing normal system operations to continue with the active BE, while the alternate BE is being patched Activating an newly patched (A)BE is essentially a reboot; therefore the downtime is ~= reboot Admins can easily revert to the prior Boot Environment (BE) as a safeguard / fallback. Why use Ops Center to patch via Live Upgrade, Alternate Boot Environments, and Solaris 11 equivalents? All the benefits of Ops Center's extensive patch and package knowledge base can be leveraged on top of Live Upgrade Ops Center can orchestrate patching based on Live Upgrade and Solaris 11 features, which all works together to minimize downtime Ops Centers advanced inventory and reporting features assurance that each OS is updated to a verifiable, consistent standard, rather than relying on ad-hoc (error prone) procedures and scripts Ops Center gives admins control over the boot environment specifications or they can let Ops Center decide when a BE is necessary, thereby reducing complexity and lowering the opportunity for user error Preparing to use Live Upgrade-like features in Solaris 11 Requirements and information you should know: Global Zone Root file-systems must be separate from Solaris Container / Zone filesystems Solaris 11 has features which are similar in concept to Live Upgrade on Solaris 10, but differ greatly in implementationImportant distinctions: Solaris 11 assumes ZFS root Solaris 11 adds Boot Environments (BE's) as an integrated feature (see beadm) Solaris 11 BE's avoid single-user patching (vs. Solaris 10 w/ ZFS snapshot=ABE). Solaris 11 Image Packaging System (IPS) has hooks for BE creation, as needed Solaris 11 allows pkgs to be installed + upgraded in alternate BE (e.g. instead of the live system) but it is controlled on a per-pkg basis Boot Environments are activated across a reboot; instead of spending long periods installing + upgrading packages in single user mode. Fallback to a prior BE is a function of the BE infrastructure (a la beadm). (Generally) Reboot + BE activation can be much much faster on Solaris 11 Preparing to use Live Upgrade on Solaris 10 Requirements and information you should know: Global Zone Root file-systems must be separate from Solaris Container / Zone filesystems Live Upgrade Pre-requisite patches must be applied before the first Live Upgrade Alternate Boot Environments are created (see "Pre-requisite Patches" section, below...) Solaris 10 Update 6 or newer on ZFS root is the practical starting point for Live Upgrade Live Upgrade with ZFS root is far more straight-forward than any scheme based on Alternative Boot Environments in slices or temporarily breaking mirrors Use Solaris best practices to upgrade the OS to at least Solaris 10 Update 4 (outside of Ops Center) UFS root can (technically) be used, but it is significantly more involved (e.g. discouraged) -- there are many reasons to move to ZFS while going through the process to update to Solaris 10 Update 6 or newer (out side of Ops Center) Recommendation: Start with Solaris 10 Update 6 or newer on ZFS root Recommendation: Start with Ops Center 12c or newer Ops Center 12c can automatically create your ABE's for you, without the need for custom scripts Ops Center 12c Update 2 avoids kernel panic on unpatched Solaris 10 update 9 (and older) -- unrelated to Live Upgrade, but more on the issue, below. NOTE: There is no magic!  If you have systems running Solaris 10 Update 5 or older on UFS root, and you don't know how to get them updated to Solaris 10 on ZFS root, then there are services available from Oracle Advanced Customer Support (ACS), which specialize in this area. Live Upgrade Pre-requisite Patches (Solaris 10) Certain Live Upgrade related patches must be present before the first Live Upgrade ABE's are created on Solaris 10.Use the following MOS Search String to find the “living document” that outlines the required patch minimums, which are necessary before using any Live Upgrade features: Solaris Live Upgrade Software Patch Requirements(Click above – the link is valid as of this writing, but search in MOS for the same "Solaris Live Upgrade Software Patch Requirements" string if necessary) It is a very good idea to check the document periodically and adapt to its contents, accordingly.IMPORTANT:  In case it wasn't clear in the above document, some direct patching of the active OS, including a reboot, may be required before Live Upgrade can be successfully used the first time.HINT: You can use Ops Center to determine what to expect for a given system, and to schedule the “pre-patching” during a maintenance window if necessary. Preparing to use Ops Center Discover + Manage (Install + Configure the Ops Center agent in) each Global Zone Recommendation:  Begin by using OCDoctor --agent-prereq to determine whether OS meets OC prerequisites (resolve any issues) See prior requirements and recommendations w.r.t. starting with Solaris 10 Update 6 or newer on ZFS (or at least Solaris 10 Update 4 on UFS, with caveats) WARNING: Systems running unpatched Solaris 10 update 9 (or older) should run the Ops Center 12c Update 2 agent to avoid a potential kernel panic The 12c Update 2 agent will check patch minimums and disable certain process accounting features if the kernel is not sufficiently patched to avoid the panic SPARC: 142900-05 Obsoleted by: 142900-06 SunOS 5.10: kernel patch 10 Oracle Solaris on SPARC (32-bit) X64: 142901-05 Obsoleted by: 142901-06 SunOS 5.10_x86: kernel patch 10 Oracle Solaris on x86 (32-bit) OR SPARC: 142909-17 SunOS 5.10: kernel patch 10 Oracle Solaris on SPARC (32-bit) X64: 142910-17 SunOS 5.10_x86: kernel patch 10 Oracle Solaris on x86 (32-bit) Ops Center 12c (initial release) and 12c Update 1 agent can also be safely used with a workaround (to be performed BEFORE installing the agent): # mkdir -p /etc/opt/sun/oc # echo "zstat_exacct_allowed=false" > /etc/opt/sun/oc/zstat.conf # chmod 755 /etc/opt/sun /etc/opt/sun/oc # chmod 644 /etc/opt/sun/oc/zstat.conf # chown -Rh root:sys /etc/opt/sun/oc NOTE: Remove the above after patching the OS sufficiently, or after upgrading to the 12c Update 2 agent Using Ops Center to apply Live Upgrade-related Pre-Patches (Solaris 10)Overview: Create an OS Update Profile containing the minimum LU-related pre-patches, based on the Solaris Live Upgrade Software Patch Requirements, previously mentioned. SIMULATE the deployment of the LU-related pre-patches Observe whether any of the LU-related pre-patches will require a reboot The job details for each Global Zone will advise whether a reboot step will be required ACTUALLY deploy the LU-related pre-patches, according to your change control process (e.g. if no reboot, maybe okay to do now; vs. must do later because of the reboot). You can schedule the job to occur later, during a maintenance window Check the job status for each node, resolving any issues found Once the LU-related pre-patches are applied, you can Ops Center to patch using Live Upgrade on Solaris 10 Using Ops Center to patch Solaris 10 with LU/ABE's -- the GOODS!(this is the heart of the tip): Create an OS Update Profile containing the patches that make up your standard build Use Solaris Baselines when possible Add other individual patches as needed ACTUALLY deploy the OS Update Profile Specify the appropriate Live Upgrade options, e.g. Synchronize the active BE to the alternate BE before patching Do not activate the BE after patching Check the job status for each node, resolving any issues found Activate the newly patched BE according to your change control process Activate = Reboot to the ABE, making the ABE the new active BE Ops Center does not separate LU activate from reboot, so expect a reboot! Check the job status for each node, resolving any issues found Examples (w/Screenshots) Solaris 10 and Live Upgrade: Auto-Create the Alternate Boot Environment (ZFS root only) ABE to be created on ZFS with name S10_12_07REC (Example) Uses built in feature to call “lucreate -n S10_12_07REC” behind scenes if not already present NOTE: Leave “lucreate” params blank (if you do specify options, the will be appended after -n $ABEName) Solaris 10 and Live Upgrade: Alternate Boot Environment Creation via Operational Profile (script) The Alternate Boot Environment is to be created via custom, user-supplied script, which does whatever is needed for the system where Live Upgrade will be used. Operational Profile, which provides the script to create an ABE: Very similar to the automatic case, but with a Script (Operational Profile), which is used to create the ABE Relies on user-supplied script in the form of an Operational Profile Could be used to prepare an ABE based on a UFS root in a slice, or on a separate device (e.g. by breaking a mirror first) – it is up to the script author to do the right thing! EXAMPLE: Same result as the ZFS case, but illustrating the Operational Profile (e.g. script) approach to call: # lucreate -n S10_1207REC NOTE: OC special variable is $ABEName Boot Environment Profile, which references the Operational Profile Script = Operational Profile on this screen Refers to Operational Profile shown in the previous section The user-supplied S10_Create_BE Operational Profile will be run The Operational Profile must send a non-zero exit code if there is a problem (so that the OS Update job will not proceed) Solaris 10 OS Update Profile (to provide the actual patch specifications) Solaris 10 Baseline “Recommended” chosen for “Install” Solaris 10 OS Update Plan (two-steps in this case) “Create a Boot Environment” + “Update OS” are chosen. Using Ops Center to patch Solaris 11 with Boot Environments (as needed) Create a Solaris 11 OS Update Profile containing the packages that make up your standard build ACTUALLY deploy the Solaris 11 OS Update Profile BE will be created if needed (or you can stipulate no BE) BE name will be auto-generated (if needed), or you may specify a BE name Check the job status for each node, resolving any issues found Check if a BE was created; if so, activate the new BE Activate = Reboot to the BE, making the new BE the active BE Ops Center does not separate BE activate from reboot NOTE: Not every Solaris 11 OS Update will require a new BE, so a reboot may not be necessary. Solaris 11: Auto BE Create (as Needed -- let Ops Center decide) BE to be created as needed BE to be named automatically Reboot (if necessary) deferred to separate step Solaris 11: OS Profile Solaris 11 “entire” chosen for a particular SRU Solaris 11: OS Update Plan (w/BE)  “Create a Boot Environment” + “Update OS” are chosen. Summary: Solaris 10 Live Upgrade, Alternate Boot Environments, and their equivalents on Solaris 11 can be very powerful tools to help minimize the downtime associated with updating your servers.  For very old Solaris, there are some important prerequisites to adhere to, but once the initial preparation is complete, Live Upgrade can be used going forward.  For Solaris 11, the built-in Boot Environment handling is leveraged directly by the Image Packaging System, and the result is a much more straight forward way to patch, and far fewer prerequisites to satisfy in getting there.  Ops Center simplifies using either approach, and helps you improve consistency from system to system, which ultimately helps you improve the overall up-time across all the Solaris systems in your environment. Please let us know what you think?  Until next time...\Leon-- Leon Shaner | Senior IT/Product ArchitectSystems Management | Ops Center Engineering @ Oracle The views expressed on this [blog; Web site] are my own and do not necessarily reflect the views of Oracle. For more information, please go to Oracle Enterprise Manager  web page or  follow us at :  Twitter | Facebook | YouTube | Linkedin | Newsletter

  Read the article

• CodePlex Daily Summary for Saturday, May 29, 2010

  CodePlex Daily Summary for Saturday, May 29, 2010New ProjectsASP.NET MVC Time Planner: ASP.NET MVC based time planner is example solution that introduces ASP.NET MVC, MSSQL AJAX and jQuery development.Blit Scripting Engine: Blit Scripting Engine provides developers using Microsofts XNA Framework the ability to implement a scripting solution to their games and other pro...Expression Evaluator: This is an article on how to build a basic expression evaluator. It can evaluate any numerical expression combined with trigonometric functions for...Log Analyzer: This project has the aim to help developers to see live log/trace from their application applying visual styles to the grabbed text.LParse: LParse is a monadic parser combinator library, similar to Haskell’s Parsec. It allows you create parsers on C# language. All parsers are first-clas...NeatHtml: NeatHtml™ is a highly-portable open source website component that displays untrusted content securely, efficiently, and accessibly. Untrusted conte...NeatUpload: The NeatUpload ™ ASP.NET component allows developers to stream uploaded files to storage (filesystem or database) and allows users to monitor uplo...NSoup: NSoup is a .NET port of the jsoup (http://jsoup.org) HTML parser and sanitizer originally written in Java. jsoup originally written by Jonathan He...Ordering: c# farm softwarephone7: Project for Windows Phone 7RestCall: A very simple library to make a simple REST call and deserialize to an object. It uses WCF REST Starter Kit and the .net serializer in: System.Runt...SCSM CSV Connector: CSV Connector allows you to specify a data file and mapping location and a scheuled interval in minutes. At each scheduled interval Service Manage...Silverlight Adorner Control: An Adorner is a custom FrameworkElement that is bound to a FrameworkElement and displays information about that element 'above' the element without...Simple Stupid Tools: Simple Stupid ToolsSQScriptRunner: Simple Quick Script Runner allows an administrator to run T-SQL Scripts against one or more servers with common characteristics. For example, an m...ssisassembly: ssisassemblySSRS Report RoboCopy: a tools used to pass a report from a server to anotherTeam Foundation Server Explorer: A standalone Team Foundation Server explorer that can be used to view and manage source files.New Releases(SocketCoder) Full Silverlight Web Video/Voice Conferencing: SocketCoderWebConferencingSystem_Compiled: Installing The Server: 1- before you start you should allow the SocketCoderWCService.MainService.exe service to use the TCP ports from 4528 to 4532...ASP.NET MVC Time Planner: MVC Time Planner - v0.0.1.0: First public alpha of MVC Time Planner is now available. I got a lot of letters from my ASP.NET blog readers who are interested in this example sol...AvalonDock: AvalonDock 1.3.3384: Welcome to AvalonDock 1.3 This is the new version of AvalonDock targetting .NET 4 These are the main features that are included: - Target Microso...Blit Scripting Engine: Blit Scripting Engine 1.0: This marks the initial release of the Blit Scripting Engine. It provides the ability to compile scripts to an assembly, load pre-compiled assemblie...Community Forums NNTP bridge: Community Forums NNTP Bridge V12: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has add...Community Forums NNTP bridge: Community Forums NNTP Bridge V13: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has add...CSharp Intellisense: V2.4: bug fix: Pascal Casing, Single Selection and other selection errorsExpression Evaluator: Expression Evaluator - Visual Studio 2010: Visual Studio 2010 VersionFacebook Graph Toolkit: Preview 2: Preview 2 updates the source to be much more like the Facebook PHP-SDK. Additionally, the code has been updated to follow StyleCop framework rules....Facebook Graph Toolkit: Preview 3: Rest API now working although not fully tested. Removed JsonObject and JsonArray custom dynamic objects in favor of standard ExpandoObject and List...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.1.1 beta Released: Hi, Today we are releasing the two most awaited features i.e, Logarithmic axis and auto update of y-axis while Scrolling and Zooming. * Logar...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.5.4 beta Released: Hi, Today we are releasing the two most awaited features i.e, Logarithmic axis and auto update of y-axis while Scrolling and Zooming. Logarithmic...Fulcrum: Fulcrum 1.0: Initial release.Git Source Control Provider: V 0.3: V 0.3 Add automatic status refresh when files in solution folder changedIBCSharp: IBCSharp 1.04: What IBCSharp 1.04.zip unzips to: http://i50.tinypic.com/205qofl.png IBCSharp Change Log 1.04 - 5/28/2010 Updated IBClient.dll to IB API version...MapWindow6: MapWindow 6.0 May 28 2010: This shifts the projection library to System.Spatial.Projections instead of MWProj4. This also fixes a meter/feet conversion error.Microsoft Health Common User Interface: Release 8.2.51.000: This is version 8.2 of the Microsoft® Health Common User Interface Control Toolkit. This release includes code updates to controls as listed below....NeatHtml: NeatHtml-trunk.221: Adds support for Internet Explorer Mobile 6.NeatUpload: NeatUpload-1.3.25: Fixes the following bugs: SWFUpload.swf could not be served by a CDN because it was embedded without setting allowScriptAccess="always". NeatUpl...NSoup: NSoup 0.1: Initial port release. Corresponds to jsoup version 0.3.1.Numina Application/Security Framework: Numina.Framework Core 53265: Visit http://framework.numina.net to help get you started.Nuntio Content: Nuntio Content 4.2.0: This upgrades MagicContent instances to the latest version that is now called NuntioContent. While this release is quite stable it is still marked ...patterns & practices: Composite WPF and Silverlight: ProjectLinker Source for VS2010 - May 2010: The ProjectLinker helps keep the source for two projects in sync by automatically creating a linked file in one project as files are added in anoth...phone7: Prism for WP7: This the first version of prism for wp7SCSM CSV Connector: SCSM CSV Connector Version 0.1: Release Notes This is the first release of the SCSM CSV Connector solution. It is an 'alpha' release and has only been tested by the developers on ...Silverlight Adorner Control: 1.0: Initial releaseSilverlight Web Comic: Comic 1.1.1: Comic Beta with functionality to button newSilverlight Web Comic: Web Comic 1.1: This version has a little implementation no visible about the future versions, options to new, save, and load. The next version has a better review...Simple.NET: Simple.Mocking 1.0.0.6: Initial version of a new mocking framework for .NET Revision 1: Expect.AnyInocationOn<T>(T target) changed to Expect.AnyInocationOn(object target...Sonic.Net: Sonic.Net v1.0.1 For Unity 2.0: This Version is a port to VS2010 of the codebase with support for unity 2.0. note: currently follows the xsd schema of the previous unity Configur...Squiggle - A Free open source Lan Messenger: Squiggle 1.0.2: v1.0 Release.Team Foundation Server Explorer: Beta 1: The first public beta release of the TFS Explorer.thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.8): Bug fix release with the following fix: When an XmlArrayAttribute decorated member has IsNullable=false, and the List<T> or Collection option is s...VCC: Latest build, v2.1.30528.0: Automatic drop of latest buildVisual Studio 2010 AutoScroller Extension: AutoScroller v0.4: A Visual studio 2010 auto-scroller extension. Simply hold down your middle mouse button and drag the mouse in the direction you wish to scroll, fu...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.10.03: !!Whats New Added CKEditor 3.3 Revision 5542 changes Options: Default Toolbar Set to Full for Administrators Browser Window: Increased Size of ...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active ProjectsAStar.netpatterns & practices – Enterprise LibraryBlogEngine.NETGMap.NET - Great Maps for Windows Forms & PresentationCommunity Forums NNTP bridgeRawrSqlServerExtensionsCustomer Portal Accelerator for Microsoft Dynamics CRMPAPpatterns & practices: Windows Azure Security Guidance

  Read the article

• guvcview recording video and audio out of synchronisation in Ubuntu 10.10

  - by SIJAR

  I finally got Guvcview, a great software for Logitech webcam and it does all the stuff that one wants out of it. But I'm not satisfy with the video recording, video and audio out of synchronisation also video seems to be in slow motion. Please help so that I can tweak in and get a good video recording with the webcam. Below is the log of Guvcview ------------------------------------------------------------------------------- guvcview 1.4.1 video_device: /dev/video0 vid_sleep: 0 cap_meth: 1 resolution: 640 x 480 windowsize: 1024 x 715 vert pane: 578 spin behavior: 0 mode: mjpg fps: 1/25 Display Fps: 0 bpp: 0 hwaccel: 1 avi_format: 4 sound: 1 sound Device: 4 sound samp rate: 0 sound Channels: 0 Sound delay: 0 nanosec Sound Format: 85 Pan Step: 2 degrees Tilt Step: 2 degrees Video Filter Flags: 0 image inc: 0 profile(default):/home/sijar/default.gpfl starting portaudio... bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started language catalog= dir:/usr/share/locale type:UTF-8 lang:en_US.utf8 cat:guvcview.mo mjpg: setting format to 1196444237 capture method = 1 video device: /dev/video0 libv4lconvert: warning more framesizes then I can handle! libv4lconvert: warning more framesizes then I can handle! /dev/video0 - device 1 libv4lconvert: warning more framesizes then I can handle! libv4lconvert: warning more framesizes then I can handle! Init. UVC Camera (046d:0825) (location: usb-0000:00:1d.7-5) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 176 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 432, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 544, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 640, height = 360 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, ... repeats a couple of times ... vid:046d pid:0825 driver:uvcvideo Adding control for Pan (relative) UVCIOC_CTRL_ADD - Error: Operation not permitted checking format: 1196444237 VIDIOC_G_COMP:: Invalid argument compression control not supported fps is set to 1/25 drawing controls control[0]: 0x980900 Brightness, 0:255:1, default 128 control[0]: 0x980901 Contrast, 0:255:1, default 32 control[0]: 0x980902 Saturation, 0:255:1, default 32 control[0]: 0x98090c White Balance Temperature, Auto, 0:1:1, default 1 control[0]: 0x980913 Gain, 0:255:1, default 0 control[0]: 0x980918 Power Line Frequency, 0:2:1, default 2 control[0]: 0x98091a White Balance Temperature, 0:10000:10, default 4000 control[0]: 0x98091b Sharpness, 0:255:1, default 24 control[0]: 0x98091c Backlight Compensation, 0:1:1, default 1 control[0]: 0x9a0901 Exposure, Auto, 0:3:1, default 3 control[0]: 0x9a0902 Exposure (Absolute), 1:10000:1, default 166 control[0]: 0x9a0903 Exposure, Auto Priority, 0:1:1, default 0 resolutions of format(2) = 19 frame rates of 1º resolution=6 Def. Res: 0 numb. fps:6 --------------------------------------- device #0 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 (hw:0,0) Host API = ALSA Max inputs = 2, Max outputs = 2 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #1 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - MIC ADC (hw:0,1) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #2 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - MIC2 ADC (hw:0,2) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #3 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - ADC2 (hw:0,3) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #4 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - IEC958 (hw:0,4) Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #5 Name = USB Device 0x46d:0x825: USB Audio (hw:1,0) Host API = ALSA Max inputs = 1, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #6 Name = front Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.012 Def. high input latency = -1.000 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #7 Name = iec958 Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #8 Name = spdif Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #9 Name = pulse Host API = ALSA Max inputs = 32, Max outputs = 32 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #10 Name = dmix Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.043 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #11 [ Default Input, Default Output ] Name = default Host API = ALSA Max inputs = 32, Max outputs = 32 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 ---------------------------------------------- SampleRate:0 Channels:0 Video driver: x11 A window manager is available VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_CTRL for user class controls control(0x0098091a) "White Balance Temperature" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_EXT_CTRLS on single controls for class: 0x009a0000 control(0x009a0902) "Exposure (Absolute)" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_CTRL for user class controls control(0x0098091a) "White Balance Temperature" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_EXT_CTRLS on single controls for class: 0x009a0000 control(0x009a0902) "Exposure (Absolute)" failed to set (error -1) Cap Video toggled: 1 (/home/sijar/Videos/Webcam) 25371756K bytes free on a total of 39908968K (used: 36 %) treshold=51200K using audio codec: 0x0055 Audio frame size is 1152 samples for selected codec IO thread started...OK [libx264 @ 0x8cbd8b0]using cpu capabilities: MMX2 SSE2 Cache64 [libx264 @ 0x8cbd8b0]profile Baseline, level 3.0 [libx264 @ 0x8cbd8b0]non-strictly-monotonic PTS shift sound by -9 ms shift sound by -9 ms shift sound by -9 ms AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... AUDIO: droping audio data (/home/sijar/Videos/Webcam) 25371748K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... Cap Video toggled: 0 Shuting Down IO Thread AUDIO: droping audio data stop= 4426644744000 start=4416533023000 VIDEO: 146 frames in 10111.000000 ms = 14.439719 fps Stoping audio stream Closing audio stream... close avi Last message repeated 145 times [libx264 @ 0x8cbd8b0]frame I:2 Avg QP:14.10 size: 24492 [libx264 @ 0x8cbd8b0]frame P:103 Avg QP:16.06 size: 20715 [libx264 @ 0x8cbd8b0]mb I I16..4: 48.4% 0.0% 51.6% [libx264 @ 0x8cbd8b0]mb P I16..4: 57.5% 0.0% 0.0% P16..4: 40.2% 0.0% 0.0% 0.0% 0.0% skip: 2.3% [libx264 @ 0x8cbd8b0]final ratefactor: 62.05 [libx264 @ 0x8cbd8b0]coded y,uvDC,uvAC intra: 79.7% 92.2% 68.4% inter: 62.4% 87.5% 48.0% [libx264 @ 0x8cbd8b0]i16 v,h,dc,p: 23% 17% 41% 19% [libx264 @ 0x8cbd8b0]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 30% 24% 26% 2% 5% 3% 3% 3% 4% [libx264 @ 0x8cbd8b0]i8c dc,h,v,p: 53% 20% 23% 4% [libx264 @ 0x8cbd8b0]ref P L0: 63.0% 37.0% [libx264 @ 0x8cbd8b0]kb/s:-0.00 total frames encoded: 0 total audio frames encoded: 0 IO thread finished...OK IO Thread finished enabling controls Cap Video toggled: 1 (/home/sijar/Videos/Webcam) 25379744K bytes free on a total of 39908968K (used: 36 %) treshold=51200K using audio codec: 0x0055 Audio frame size is 1152 samples for selected codec IO thread started...OK [libx264 @ 0x8cfba20]using cpu capabilities: MMX2 SSE2 Cache64 [libx264 @ 0x8cfba20]profile Baseline, level 3.0 [libx264 @ 0x8cfba20]non-strictly-monotonic PTS shift sound by -236 ms shift sound by -236 ms shift sound by -236 ms (/home/sijar/Videos/Webcam) 25377044K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25373408K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... (/home/sijar/Videos/Webcam) 25370696K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... (/home/sijar/Videos/Webcam) 25367680K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25364052K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25360312K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25356628K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25352908K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25349316K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25345552K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25341828K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25338092K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25334412K bytes free on a total of 39908968K (used: 36 %) treshold=51200K Cap Video toggled: 0 Shuting Down IO Thread stop= 4708817235000 start=4578624714000 VIDEO: 1604 frames in 130192.000000 ms = 12.320265 fps Stoping audio stream Closing audio stream... close avi Last message repeated 1603 times [libx264 @ 0x8cfba20]frame I:16 Avg QP:14.78 size: 42627 [libx264 @ 0x8cfba20]frame P:1547 Avg QP:16.44 size: 28599 [libx264 @ 0x8cfba20]mb I I16..4: 21.6% 0.0% 78.4% [libx264 @ 0x8cfba20]mb P I16..4: 28.1% 0.0% 0.0% P16..4: 70.5% 0.0% 0.0% 0.0% 0.0% skip: 1.4% [libx264 @ 0x8cfba20]final ratefactor: 88.17 [libx264 @ 0x8cfba20]coded y,uvDC,uvAC intra: 74.4% 95.8% 83.2% inter: 75.2% 94.6% 69.2% [libx264 @ 0x8cfba20]i16 v,h,dc,p: 27% 17% 40% 16% [libx264 @ 0x8cfba20]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 25% 21% 3% 6% 4% 5% 4% 7% [libx264 @ 0x8cfba20]i8c dc,h,v,p: 61% 18% 18% 4% [libx264 @ 0x8cfba20]ref P L0: 64.0% 36.0% [libx264 @ 0x8cfba20]kb/s:-0.00 total frames encoded: 0 total audio frames encoded: 0 IO thread finished...OK IO Thread finished enabling controls Shuting Down Thread Thread terminated... cleaning Thread allocations: 100% SDL Quit Video Thread finished write /home/sijar/.guvcviewrc OK free audio mutex closed v4l2 strutures free controls free controls - vidState cleaned allocations - 100% Closing portaudio ...OK Closing GTK... OK

  Read the article

• VLC 2.0.3 on Lubuntu 12.04: No audio?

  - by drezabek

  I am on Lubuntu 12.04, and I have installed VLC media player version 2.0.3. When I try and play an audio file, it appears to load fine, and the media position bar displays the progress, and it says it is playing, but I can't here any thing through my speakers. I can hear game audio, web audio, and audio from SMPlayer just fine, but with VLC, I can't here anything. Below is the "Messages" output with the verbosity option set to "2 (debug)" main debug: processing request item: The Bottom, node: Playlist, skip: 0 main debug: resyncing on The Bottom main debug: The Bottom is at 0 main debug: starting playback of the new playlist item main debug: resyncing on The Bottom main debug: The Bottom is at 0 main debug: creating new input thread main debug: Creating an input for 'The Bottom' main debug: TIMER input launching for 'Floex - Machinarium Soundtrack - 01 The Bottom.flac' : 23.706 ms - Total 23.706 ms / 1 intvls (Avg 23.706 ms) main debug: using timeshift granularity of 50 MiB, in path '/tmp' main debug: `file:///home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' gives access `file' demux `' path `/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' main debug: creating demux: access='file' demux='' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' file='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for access_demux module: 3 candidates main debug: no access_demux module matching "file" could be loaded main debug: TIMER module_need() : 2.332 ms - Total 2.332 ms / 1 intvls (Avg 2.332 ms) main debug: creating access 'file' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac', path='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for access module: 2 candidates filesystem debug: opening file `/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: using access module "filesystem" main debug: TIMER module_need() : 0.762 ms - Total 0.762 ms / 1 intvls (Avg 0.762 ms) main debug: Using stream method for AStream* main debug: starting pre-buffering main debug: received first data after 0 ms main debug: pre-buffering done 1024 bytes in 0s - 43478 KiB/s main debug: looking for stream_filter module: 7 candidates main debug: no stream_filter module matching "any" could be loaded main debug: TIMER module_need() : 0.236 ms - Total 0.236 ms / 1 intvls (Avg 0.236 ms) main debug: looking for stream_filter module: 1 candidate main debug: using stream_filter module "stream_filter_record" main debug: TIMER module_need() : 0.156 ms - Total 0.156 ms / 1 intvls (Avg 0.156 ms) main debug: creating demux: access='file' demux='' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' file='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for demux module: 54 candidates flacsys debug: Picture type=3 mime=image/png description='' file length=679371 qt4 debug: IM: Setting an input main debug: looking for packetizer module: 21 candidates main debug: using packetizer module "packetizer_flac" main debug: TIMER module_need() : 0.211 ms - Total 0.211 ms / 1 intvls (Avg 0.211 ms) main debug: using demux module "flacsys" main debug: TIMER module_need() : 4.023 ms - Total 4.023 ms / 1 intvls (Avg 4.023 ms) main debug: looking for a subtitle file in /home/doug/Music/unsorted/Floex - Machinarium Soundtrack/ main debug: looking for meta reader module: 2 candidates main debug: using meta reader module "taglib" main debug: TIMER module_need() : 5.245 ms - Total 5.245 ms / 1 intvls (Avg 5.245 ms) main debug: removing module "taglib" main debug: `file:///home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' successfully opened main debug: selecting program id=0 main debug: looking for decoder module: 30 candidates main debug: using decoder module "flac" main debug: TIMER module_need() : 0.442 ms - Total 0.442 ms / 1 intvls (Avg 0.442 ms) main debug: Buffering 0% flac debug: decode STREAMINFO flac debug: channels:2 samplerate:44100 bitspersamples:16 flac debug: STREAMINFO decoded main debug: Buffering 30% main debug: recycling audio output main debug: looking for audio output module: 3 candidates main debug: Buffering 61% pulse debug: using stereo channel map pulse debug: using library version 1.1.0 pulse debug: (compiled with version 1.1.0, protocol 26) main debug: Buffering 92% main debug: Stream buffering done (371 ms in 2 ms) pulse debug: connected locally to unix:/home/doug/.pulse/dce22254e867f905188a2ce200000003-runtime/native as client #14 pulse debug: using protocol 26, server protocol 26 pulse debug: using buffer metrics: maxlength=4194304, tlength=9880, prebuf=0, minreq=3528 pulse debug: connected to sink 0: alsa_output.pci-0000_00_14.2.analog-stereo main debug: using audio output module "pulse" main debug: TIMER module_need() : 4.571 ms - Total 4.571 ms / 1 intvls (Avg 4.571 ms) main debug: output 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: mixer 'f32l' 44100 Hz Stereo frame=1 samples/8 bytes main debug: filter(s) 'f32l'->'s16l' 44100 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates audio_format debug: f32l->s16l, bits per sample: 32->16 main debug: using audio filter module "audio_format" main debug: TIMER module_need() : 0.187 ms - Total 0.187 ms / 1 intvls (Avg 0.187 ms) main debug: conversion pipeline completed main debug: looking for audio mixer module: 2 candidates main debug: using audio mixer module "float32_mixer" main debug: TIMER module_need() : 0.125 ms - Total 0.125 ms / 1 intvls (Avg 0.125 ms) main debug: input 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: looking for audio filter module: 1 candidate scaletempo debug: format: 44100 rate, 2 nch, 4 bps, fl32 scaletempo debug: params: 30 stride, 0.200 overlap, 14 search scaletempo debug: 1.000 scale, 1323.000 stride_in, 1323 stride_out, 1059 standing, 264 overlap, 617 search, 2204 queue, fl32 mode main debug: using audio filter module "scaletempo" main debug: TIMER module_need() : 0.233 ms - Total 0.233 ms / 1 intvls (Avg 0.233 ms) main debug: filter(s) 's16l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo pulse debug: listing sink alsa_output.pci-0000_00_14.2.analog-stereo (0): Built-in Audio Analog Stereo main debug: looking for audio filter module: 14 candidates audio_format debug: s16l->f32l, bits per sample: 16->32 main debug: using audio filter module "audio_format" main debug: TIMER module_need() : 0.147 ms - Total 0.147 ms / 1 intvls (Avg 0.147 ms) main debug: conversion pipeline completed pulse debug: base volume: 65536 main debug: looking for audio filter module: 1 candidate equalizer debug: equalizer loaded for 44100 Hz with 10 bands 2 pass equalizer debug: 60 Hz -> factor:0.000000 alpha:0.003013 beta:0.993973 gamma:1.993901 equalizer debug: 170 Hz -> factor:0.000000 alpha:0.008490 beta:0.983019 gamma:1.982437 equalizer debug: 310 Hz -> factor:0.000000 alpha:0.015374 beta:0.969252 gamma:1.967331 equalizer debug: 600 Hz -> factor:0.000000 alpha:0.029328 beta:0.941343 gamma:1.934254 equalizer debug: 1000 Hz -> factor:0.000000 alpha:0.047918 beta:0.904163 gamma:1.884869 equalizer debug: 3000 Hz -> factor:0.000000 alpha:0.130408 beta:0.739184 gamma:1.582718 equalizer debug: 6000 Hz -> factor:0.000000 alpha:0.226555 beta:0.546889 gamma:1.015267 equalizer debug: 12000 Hz -> factor:0.000000 alpha:0.344937 beta:0.310127 gamma:-0.181410 equalizer debug: 14000 Hz -> factor:0.000000 alpha:0.366438 beta:0.267123 gamma:-0.521151 equalizer debug: 16000 Hz -> factor:0.000000 alpha:0.379009 beta:0.241981 gamma:-0.808451 main debug: using audio filter module "equalizer" main debug: TIMER module_need() : 0.353 ms - Total 0.353 ms / 1 intvls (Avg 0.353 ms) main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: looking for visualization2 module: 1 candidate main debug: looking for text renderer module: 2 candidates freetype debug: Building font databases. freetype debug: Took 0 microseconds freetype debug: Using Serif Bold as font from file /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf freetype debug: using fontsize: 2 main debug: using text renderer module "freetype" main debug: TIMER module_need() : 3.278 ms - Total 3.278 ms / 1 intvls (Avg 3.278 ms) main debug: looking for video filter2 module: 18 candidates swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: RGBA with scaling using Bicubic (good quality) main debug: using video filter2 module "swscale" main debug: TIMER module_need() : 1.037 ms - Total 1.037 ms / 1 intvls (Avg 1.037 ms) main debug: looking for video filter2 module: 18 candidates yuvp debug: YUVP to YUVA converter main debug: using video filter2 module "yuvp" main debug: TIMER module_need() : 0.156 ms - Total 0.156 ms / 1 intvls (Avg 0.156 ms) main debug: Deinterlacing available main debug: deinterlace 0, mode blend, is_needed 0 main debug: Opening vout display wrapper main debug: looking for vout display module: 6 candidates main debug: looking for vout window xid module: 4 candidates qt4 debug: requesting video... qt4 debug: Video was requested 0, 0 main debug: using vout window xid module "qt4" main debug: TIMER module_need() : 61.671 ms - Total 61.671 ms / 1 intvls (Avg 61.671 ms) main debug: looking for inhibit module: 2 candidates main debug: using inhibit module "xdg_screensaver" main debug: TIMER module_need() : 0.336 ms - Total 0.336 ms / 1 intvls (Avg 0.336 ms) xdg_screensaver debug: started xdg-screensaver (PID = 6682) xcb_xv debug: connected to X11.0 server xcb_xv debug: vendor : The X.Org Foundation xcb_xv debug: version: 11103000 xcb_xv debug: using screen 0x15a xcb_xv debug: using XVideo extension v2.2 xcb_xv debug: using adaptor NV17 Video Texture xcb_xv debug: using port 310 xcb_xv debug: using image format 0x30323449 xcb_xv debug: using X11 visual ID 0x21 (depth: 24) xcb_xv debug: using X11 window 0x03400000 xcb_xv debug: using X11 graphic context 0x03400002 main debug: VoutDisplayEvent 'fullscreen' 0 main debug: VoutDisplayEvent 'resize' 800x500 window main debug: using vout display module "xcb_xv" main debug: TIMER module_need() : 69.890 ms - Total 69.890 ms / 1 intvls (Avg 69.890 ms) main debug: original format sz 800x500, of (0,0), vsz 800x500, 4cc I420, sar 1:1, msk r0x0 g0x0 b0x0 main debug: removing module "freetype" main debug: looking for text renderer module: 2 candidates freetype debug: Building font databases. freetype debug: Took 0 microseconds freetype debug: Using Serif Bold as font from file /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf freetype debug: using fontsize: 2 main debug: using text renderer module "freetype" main debug: TIMER module_need() : 4.552 ms - Total 4.552 ms / 1 intvls (Avg 4.552 ms) main debug: using visualization2 module "visual" main debug: TIMER module_need() : 84.104 ms - Total 84.104 ms / 1 intvls (Avg 84.104 ms) main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: filter(s) 'f32l'->'f32l' 48510 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates main debug: using audio filter module "samplerate" main debug: TIMER module_need() : 0.375 ms - Total 0.375 ms / 1 intvls (Avg 0.375 ms) main debug: conversion pipeline completed main debug: End of audio preroll main debug: Decoder buffering done in 91 ms main warning: PTS is out of range (-9269), dropping buffer pulse debug: deferring start (190703 us) main debug: looking for video blending module: 1 candidate main debug: using video blending module "blend" main debug: TIMER module_need() : 0.275 ms - Total 0.275 ms / 1 intvls (Avg 0.275 ms) main debug: Detected interlaced video main debug: deinterlace 0, mode blend, is_needed 1 xcb_xv debug: display is visible pulse debug: starting deferred pulse warning: too late by 93760 us pulse debug: changed sample rate to 44186 Hz pulse debug: started pulse warning: too late by 94474 us pulse debug: changed sample rate to 44229 Hz pulse warning: too late by 93532 us pulse debug: changed sample rate to 44272 Hz pulse warning: too late by 92829 us pulse debug: changed sample rate to 44315 Hz pulse warning: too late by 92132 us pulse debug: changed sample rate to 44358 Hz xcb_xv debug: display is visible pulse warning: too late by 91534 us pulse debug: changed sample rate to 44401 Hz xcb_xv debug: display is visible pulse warning: too late by 89482 us pulse debug: changed sample rate to 44440 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible pulse warning: too late by 87529 us pulse debug: changed sample rate to 44479 Hz pulse warning: too late by 84577 us pulse debug: changed sample rate to 44504 Hz main debug: auto hiding mouse cursor pulse warning: too late by 78562 us pulse debug: changed sample rate to 44492 Hz pulse warning: too late by 68015 us pulse debug: changed sample rate to 44422 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible main debug: auto hiding mouse cursor pulse debug: changed sample rate to 44336 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible main debug: auto hiding mouse cursor I have had issues with VLC in the past- the audio quality was extremely crackly, as if the headphone jack was plugged in only half way, and the sounds were extremely sharp and caused my speakers to make a ringing/vibrating noise... It would eventually start working after I messed around with the audio settings, but it happened every restart. I eventually switched to SMPlayer, but now I need some of the features that VLC offers, but I still can't use VLC. At this point, the audio can not be heard at all, and the method I used before, messing around with the audio settings, isn't getting me anywhere. (note, I reposted this on VideoLan's forums, link is here: http://forum.videolan.org/viewtopic.php?f=13&t=104726) Please let me know if you need more information, or are confused by something I posted! Thanks!

  Read the article

• CodePlex Daily Summary for Sunday, April 25, 2010

  CodePlex Daily Summary for Sunday, April 25, 2010New Projects281slides: 281slides is a project to demonstrate how one could go about implementing something similar to http://280slides.com in Silverlight3.Alex.XP's ARMA2 Chinese Language Pack Tools: Alex.XP's ARMA2 Chinese Language ToolsAuto Version Web Assets: The AVWA project is an HTTP Module written in C# that is designed to allow for versioning of various web assets such as .CSS and .JS files. This a...CAECE Twitter Clon: Proyecto para hacer un clon de twitter alumnos CAECE 2010DNSExchanger: Provides users to switch their PC's DNSs with pre-defined DNS with one click. Fluent ViewModel Configuration for WPF (MVVM): Fluent MVVM Configuration for WPF. A powerful yet simple interface for configuring view models for WPF. Eliminates INotifyPropertyChanged duplic...Genetic Algorithm N-Queens Solver: Genetic Algorithm N-Queens Solver with Multithreaded GUI.Hangmanondotnet: Just a starterHelium Frog Animator: Here is the Source code for the Helium Frog Animator. It is released under the GNU General Public Licence. The software enables stop motion animati...LISCH Collision Resolution, AVL Trees: LISCH Collision Resolution, AVL Trees Last Insertion Standart Colesced HashingNetPE: NetPE is a Portable Executable(PE) editor with full Metadata support. It is developed in pure C#.Proyecto Nilo: nada por ahoraSQL Schema Source Control: Track database schema changes automatically C# application that you can run against your SQL Databases (supports SQL 2008 right now, but you cou...uTorrent-Net-Client: A network client for uTorrent over the uTorrent-WebAPI. The Client use the API implementation from "uTorrent Web Client API Wrapper Library" (http:...Visual Leak Detector for Visual C++ 2008/2010: Enhanced Memory Leak Detection for Visual C++Visual Studio 2010 AutoScroller Extension: This is an extension to provide auto-scrolling to the Visual Studio 2010 environment. Simply middle click and drag the mouse in the direction yo...Vje: Vje projectVs2010-TipSite - Enter Island: This project is a visual studio 2010 project created in Silverligt. The project used to give using tips about visual studio 2010 by movies clips an...WKURM: Research Methods project @ western kentucky universityYupsky: yupsky webNew Releases.NET DiscUtils: Version 0.8: This is the 0.8 release of DiscUtils. New in this release are: An NFS client, supporting access to virtual disks held on an NFS server. A PowerS...Bluetooth Radar: Version 2.2: Add Settings window Get installed services on the deveice Check if Object Exchange is installed and changed properties. Add Windows Bluetooth...CSharp Intellisense: V1.7: major improvements: - Select best suggestion - on going changes filters (the filters will changed according to the current typing) - remember last ...DNSExchanger: DNSExchanger Beta v0.1: First release of the project, DNSExchanger. It requires, 32-bit Operating System (XP, Vista, 7) and need to be runned with administration credent...DotNetNuke® Form and List (formerly User Defined Table): 05.01.03: Form and List 05.01.03What's New: This release, Form and List 05.01.03, will be a stabilization release. It requires at least DotNetNuke 5.1.3 for...Enki Char 2 BIN: Enki Char 2 Bin: This program converts Characters to Binary and vice versaFluent ViewModel Configuration for WPF (MVVM): FluentViewModel Alpha1: This is a debug build of the FluentViewModel library. This has been provided to get feed back on the API and to look for bugs. For an example on h...Hangmanondotnet: Hangman: Just a previewHelium Frog Animator: Helium Frog 2.06 Documentation: Complete User Guide documentation in html formatHelium Frog Animator: Helium Frog 2.06 Source Code: Zip file contains all Visual Basic 6 source code, Artwork, sound files etc.Helium Frog Animator: Helium Frog Version 2.06: This file is the released version on Helium Frog 2.06. It contains binary files and required runtime libraries.Helium Frog Animator: Motion Jpeg Handling 10: Source code , module and debugging application in C# a) Module concatenates .jpg files to motion jpeg .avi file. b) Module retrieves any required ...Helium Frog Animator: Sample Grabber 03: Source code and debug program in C# a) Module lists all the available DirextX source devices b) Sets up video streaming to a picturebox by creating...Henge3D Physics Library for XNA: Henge3D Source (2010-04): The biggest change in this release was the addition of the OnCollision and OnSeparation "events" in the RigidBody class. An attached handler will r...HouseFly controls: HouseFly controls alpha 0.9.4.1: HouseFly controls release 0.9.4.1 alphaHTML Ruby: 6.22.0: Added new options for adjusting ruby line height and text line height Live preview for options Adjusted applied styles Added option to report...HTML Ruby: 6.22.1: space by word if ASCII character improved handling of unclosed ruby tagMultiwfn: Multiwfn1.3_binary: Multiwfn1.3_binaryMultiwfn: multiwfn1.3_source: multiwfn1.3_sourceRapid Dictionary: Rapid Dictionary Alpha 1.0: Try auto updatable version: http://install.rapiddict.com/index.html Rapid Dictionary Alpha 1.0 includes such functionality:you can run translation...Silverlight Input Keyboard: Version 1.5 for Silverlight 4: Dependency System.Windows.Interactivity.dll from Blend 4 RC http://www.microsoft.com/downloads/details.aspx?FamilyID=88484825-1b3c-4e8c-8b14-b05d02...SQL Schema Source Control: 1.0: Initial ReleaseUDC indexes parser: UDC indexex parser Beta: LALR(1): 1) Невозможно использовать знак распространения на общие и специальные определители, за исключением определителей в скобках (), (0), (=), ...uTorrent-Net-Client: uTorrent-Net-Client: This download contains the uTorrentNetClient and the 7Zip Windows-Service. Before you can use both, you must configuration some points in the App.C...VidCoder: 0.3.0: Changes: Added customizable columns on the Queue. Right click->Customize columns, then drag and drop to choose and reorder. Column sizes will also...Visual Leak Detector for Visual C++ 2008/2010: v2.0: New version of VLD. This adds support for x64 applications and VS 2010.Visual Studio 2010 AutoScroller Extension: AutoScroller v0.1: Initial release of Visual studio 2010 auto-scroller extension. Simply middle click and drag the mouse in the direction you wish to scroll, further...Yasbg: It's Static GUI: Many changes have been made from the previous release. Read the README! This release adds a GUI and RSS support. From now on, this program is only...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitSilverlight ToolkitMicrosoft SQL Server Product Samples: Databasepatterns & practices – Enterprise LibraryWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesPHPExcelMost Active Projectspatterns & practices – Enterprise LibraryRawrGMap.NET - Great Maps for Windows Forms & PresentationBlogEngine.NETParticle Plot PivotNB_Store - Free DotNetNuke Ecommerce Catalog ModuleDotNetZip LibraryN2 CMSFarseer Physics Enginepatterns & practices: Composite WPF and Silverlight

  Read the article

• Using rounded corners in modern websites with CSS3

  - by nikolaosk

  This is going to be the sixth post in a series of posts regarding HTML 5. You can find the other posts here , here, here , here and here.In this post I will provide a hands-on example on how to use rounded corners (rounded corners in CSS3) in your website. I think this is the feature that is most required in the new modern websites.Most websites look great with their lovely round panels and rounded corner tab style menus. We could achieve that effect earlier but we should resort to complex CSS rules and images. I will show you how to accomplish this great feature with the power of CSS 3.We will not use Javascript.Javascript is required for IE 7, IE 8 and the notorious IE 6. The best solution for implementing corners using CSS and Javascript without using images is Nifty corners cube. There are detailed information how to achieve this in the link I provided. This solution is tested in earlier vesrions of IE (IE 6,IE 7,IE 8) and Opera,Firefox,Safari. In order to be absolutely clear this is not (and could not be) a detailed tutorial on HTML 5. There are other great resources for that.Navigate to the excellent interactive tutorials of W3School.Another excellent resource is HTML 5 Doctor.Two very nice sites that show you what features and specifications are implemented by various browsers and their versions are http://caniuse.com/ and http://html5test.com/. At this times Chrome seems to support most of HTML 5 specifications.Another excellent way to find out if the browser supports HTML 5 and CSS 3 features is to use the Javascript lightweight library Modernizr.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here.Before I go on with the actual demo I will use the (http://www.caniuse.com) to see the support for web fonts from the latest versions of modern browsers.Please have a look at the picture below. We see that all the latest versions of modern browsers support this feature.We can see that even IE 9 supports this feature.  Let's move on with the actual demo. This is going to be a rather simple demo.I create a simple HTML 5 page. The markup follows and it is very easy to use and understand <!DOCTYPE html><html lang="en">  <head>    <title>HTML 5, CSS3 and JQuery</title>    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" >    <link rel="stylesheet" type="text/css" href="style.css">       </head>  <body>      <div id="header">      <h1>Learn cutting edge technologies</h1>    </div>        <div id="main">          <h2>HTML 5</h2>                        <p id="panel1">            HTML5 is the latest version of HTML and XHTML. The HTML standard defines a single language that can be written in HTML and XML. It attempts to solve issues found in previous iterations of HTML and addresses the needs of Web Applications, an area previously not adequately covered by HTML.          </p>      </div>             </body>  </html>Then I need to write the various CSS rules that style this markup. I will name it style.css   body{        line-height: 38px;        width: 1024px;        background-color:#eee;        text-align:center;      }#panel1 { margin:auto; text-align:left; background-color:#77cdef;width:400px; height:250px; padding:15px;font-size:16px;font-family:tahoma;color:#fff;border-radius: 20px;}Have a look below to see what my page looks like in IE 10. This is possible through the border-radious property. The colored panel has all four corners rounded with the same radius.We can add a border to the rounded corner panel by adding this property declaration in the #panel1,  border:4px #000 solid;We can have even better visual effects if we specify a radius for each corner.This is the updated version of the style.css. body{        line-height: 38px;        width: 1024px;        background-color:#eee;        text-align:center;      }#panel1 { margin:auto; text-align:left; background-color:#77cdef;border:4px #000 solid;width:400px; height:250px; padding:15px;font-size:16px;font-family:tahoma;color:#fff;border-top-left-radius: 20px;border-top-right-radius: 70px;border-bottom-right-radius: 20px;border-bottom-left-radius: 70px;} This is how my page looks in Firefox 15.0.1  In this final example I will show you how to style with CSS 3 (rounded corners) a horizontal navigation menu. This is the new version of the HTML markup<!DOCTYPE html><html lang="en">  <head>    <title>HTML 5, CSS3 and JQuery</title>    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" >    <link rel="stylesheet" type="text/css" href="style.css">       </head>  <body>      <div id="header">      <h1>Learn cutting edge technologies</h1>    </div>        <div id="nav"><ul><li><a class="mymenu" id="activelink" href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8934038#">Main</a></li><li><a class="mymenu" href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8934038#">HTML 5</a></li><li><a class="mymenu" href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8934038#">CSS 3</a></li><li><a class="mymenu" href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8934038#">JQuery</a></li></ul></div>        <div id="main">          <h2>HTML 5</h2>                        <p id="panel1">            HTML5 is the latest version of HTML and XHTML. The HTML standard defines a single language that can be written in HTML and XML. It attempts to solve issues found in previous iterations of HTML and addresses the needs of Web Applications, an area previously not adequately covered by HTML.          </p>      </div>             </body>  </html> This is the updated version of style.css body{        line-height: 38px;        width: 1024px;        background-color:#eee;        text-align:center;      }#panel1 { margin:auto; text-align:left; background-color:#77cdef;border:4px #000 solid;width:400px; height:250px; padding:15px;font-size:16px;font-family:tahoma;color:#fff;border-top-left-radius: 20px;border-top-right-radius: 70px;border-bottom-right-radius: 20px;border-bottom-left-radius: 70px;}#nav ul {width:900px; position:relative;top:24px;}ul li { text-decoration:none; display:inline;}ul li a.mymenu { font-family:Tahoma; color:black; font-size:14px;font-weight:bold;background-color:#77cdef; color:#fff;border-top-left-radius:18px; border-top-right-radius:18px; border:1px solid black; padding:15px; padding-bottom:10px;margin :2px; text-decoration:none; border-bottom:none;}.mymenu:hover { background-color:#e3781a; color:black;} The CSS rules are the classic rules that are extensively used for styling menus.The border-radius property is still responsible for the rounded corners in the menu.This is how my page looks in Chrome version 21.  Hope it helps!!!

  Read the article

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >