Search Results

Search found 8776 results on 352 pages for 'boolean logic'.

Page 99/352 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

• "Attach or Add an entity that is not new...loaded from another DataContext. This is not supported."

  - by sah302

  Similar error as other questions, but not quite the same, I am not trying to attach anything. What I am trying to do is insert a new row into a linking table, specifically UserAccomplishment. Relations are set in LINQ to User and Accomplishment Tables. I have a generic insert function: Public Function insertRow(ByVal entity As ImplementationType) As Boolean If entity IsNot Nothing Then Dim lcfdatacontext As New LCFDataContext() Try lcfdatacontext.GetTable(Of ImplementationType)().InsertOnSubmit(entity) lcfdatacontext.SubmitChanges() lcfdatacontext.Dispose() Return True Catch ex As Exception Return False End Try Else Return False End If End Function If you try and give UserAccomplishment the two appropriate objects this will naturally crap out if either the User or Accomplishment already exist. It only works when both user and accomplishment don't exist. I expected this behavior. What does work is simply giving the userAccomplishment object a user.id and accomplishment.id and populating the rest of the fields. This works but is kind of awkward to use in my app, it would be much easier to simply pass in both objects and have it work out what already exists and what doesn't. Okay so I made the following (please ignore the fact that this is horribly inefficient because I know it is): Public Class UserAccomplishmentDao Inherits EntityDao(Of UserAccomplishment) Public Function insertLinkerObjectRow(ByVal userAccomplishment As UserAccomplishment) Dim insertSuccess As Boolean = False If Not userAccomplishment Is Nothing Then Dim userDao As New UserDao() Dim accomplishmentDao As New AccomplishmentDao() Dim user As New User() Dim accomplishment As New Accomplishment() 'see if either object already exists in db' user = userDao.getOneByValueOfProperty("Id", userAccomplishment.User.Id) accomplishment = accomplishmentDao.getOneByValueOfProperty("Id", userAccomplishment.Accomplishment.Id) If user Is Nothing And accomplishment Is Nothing Then 'neither the user or the accomplishment exist, both are new so insert them both, typical insert' insertSuccess = Me.insertRow(userAccomplishment) ElseIf user Is Nothing And Not accomplishment Is Nothing Then 'user is new, accomplishment is not new, so just insert the user, and the relation in userAccomplishment' Dim userWithExistingAccomplishment As New UserAccomplishment(userAccomplishment.User, userAccomplishment.Accomplishment.Id, userAccomplishment.LastUpdatedBy) insertSuccess = Me.insertRow(userWithExistingAccomplishment) ElseIf Not user Is Nothing And accomplishment Is Nothing Then 'user is not new, accomplishment is new, so just insert the accomplishment, and the relation in userAccomplishment' Dim existingUserWithAccomplishment As New UserAccomplishment(userAccomplishment.UserId, userAccomplishment.Accomplishment, userAccomplishment.LastUpdatedBy) insertSuccess = Me.insertRow(existingUserWithAccomplishment) Else 'both are not new, just add the relation' Dim userAccomplishmentBothExist As New UserAccomplishment(userAccomplishment.User.Id, userAccomplishment.Accomplishment.Id, userAccomplishment.LastUpdatedBy) insertSuccess = Me.insertRow(userAccomplishmentBothExist) End If End If Return insertSuccess End Function End Class Alright, here I basically check if the supplied user and accomplishment already exists in the db, and if so call an appropriate constructor that will leave whatever already exists empty, but supply the rest of the information so the insert can succeed. However, upon trying an insert: Dim result As Boolean = Me.userAccomplishmentDao.insertLinkerObjectRow(userAccomplishment) In which the user already exists, but the accomplishment does not (the 99% typical scenario) I get the error: "An attempt has been made to Attach or Add an entity that is not new, perhaps having been loaded from another DataContext. This is not supported." I have debugged this multiple times now and am not sure why this is occuring, if either User or Accomplishment exist, I am not including it in the final object to try to insert. So nothing appears to be attempted to be added. Even in debug, upon insert, the object was set to empty. So the accomplishment is new and the user is empty. 1) Why is it still saying that and how can I fix it ..using my current structure 2) Pre-emptive 'use repository pattern answers' - I know this way kind of sucks in general and I should be using the repository pattern. However, I can't use that in the current project because I don't have time to refactor that due to my non existence knowledge of it and time constraints. The usage of the app is going to so small that the inefficient use of datacontext's and what have you won't matter so much. I can refactor it once it's up and running, but for now I just need to 'push through' with my current structure. Edit: I also just tested this when having both already exists, and only insert each object's IDs into the table, that works. So I guess I could manually insert whichever object doesn't exist as a single insert, then put the ids only into the linking table, but I still don't know why when one object exists, and I make it empty, it doens't work.

  Read the article

• Recommended integration mechanism for bi-directional, authenticated, encrypted connection in C clien

  - by rcampbell

  Let me first give an example. Imagine you have a single server running a JVM application. This server keeps a collection of N equations, once for each client: Client #1: 2x Client #2: 1 + y Client #3: z/4 This server includes an HTTP interface so that random visitors can type https://www.acme.com/client/3 int their browsers and see the latest evaluated result of z/4. The tricky part is that either the client or the server may change the variable value at any time, informing the other party immediately. More specifically, Client #3 - a C app - can initially tell the server that z = 20. An hour later that same client informs the server that z = 23. Likewise the server can later inform the client that z = 28. As caf pointed out in the comments, there can be a race condition when values are changed by the client and server simultaneously. The solution would be for both client and server to send the operation performed in their message, which would need to be executed by the other party. To keep things simple, let's limit the operations to (commutative) addition, allowing us to disregard message ordering. For example, the client seeds the server with z = 20: server:z=20, client:z=20 server sends {+3} message (so z=23 locally) & client sends {-2} message (so z=18 locally) at the exact same time server receives {-2} message at some point, adds to his local copy so z=21 client receives {+3} message at some point, adds to his local copy so z=21 As long as all messages are eventually evaluated by both parties, the correct answer will eventually be given to the users of the client and server since we limited ourselves to commutative operations (addition of 3 and -2). This does mean that both client and server can be returning incorrect answers in the time it takes for messages to be exchanged and processed. While undesirable, I believe this is unavoidable. Some possible implementations of this idea include: Open an encrypted, always on TCP socket connection for communication Pros: no additional infrastructure needed, client and server know immediately if there is a problem (disconnect) with the other party, fairly straightforward (except the the encryption), native support from both JVM and C platforms Cons: pretty low-level so you end up writing a lot yourself (protocol, delivery verification, retry-on-failure logic), probably have a lot of firewall headaches during client app installation Asynchronous messaging (ex: ActiveMQ) Pros: transactional, both C & Java integration, free up the client and server apps from needing retry logic or delivery verification, pretty straightforward encryption, easy extensibility via message filters/routers/etc Cons: need additional infrastructure (message server) which must never fail, Database or file system as asynchronous integration point Same pros/cons as above but messier RESTful Web Service Pros: simple, possible reuse of the server's existing REST API, SSL figures out the encryption problem for you (maybe use RSA key a la GitHub for authentication?) Cons: Client now needs to run a C HTTP REST server w/SSL, client and server need retry logic. Axis2 has both a Java and C version, but you may be limited to SOAP. What other techniques should I be evaluating? What real world experiences have you had with these mechanisms? Which do you recommend for this problem and why?

  Read the article

• What happens when you add/remove current site as trusted site?

  - by kasey

  What happens when you add/remove the current site, while logged on, as a trusted site? When users do this on our website, and then try to click on a link or close the browser, they get the following JavaScript exception: "Microsoft JScript runtime error: 'type' is null or not an object" in the below library code at the line "var etype = this.type = e.type.toLowerCase();" Sys.UI.DomEvent = function Sys$UI$DomEvent(eventObject) { /// <summary locid="M:J#Sys.UI.DomEvent.#ctor" /> /// <param name="eventObject"></param> /// <field name="altKey" type="Boolean" locid="F:J#Sys.UI.DomEvent.altKey"></field> /// <field name="button" type="Sys.UI.MouseButton" locid="F:J#Sys.UI.DomEvent.button"></field> /// <field name="charCode" type="Number" integer="true" locid="F:J#Sys.UI.DomEvent.charCode"></field> /// <field name="clientX" type="Number" integer="true" locid="F:J#Sys.UI.DomEvent.clientX"></field> /// <field name="clientY" type="Number" integer="true" locid="F:J#Sys.UI.DomEvent.clientY"></field> /// <field name="ctrlKey" type="Boolean" locid="F:J#Sys.UI.DomEvent.ctrlKey"></field> /// <field name="keyCode" type="Number" integer="true" locid="F:J#Sys.UI.DomEvent.keyCode"></field> /// <field name="offsetX" type="Number" integer="true" locid="F:J#Sys.UI.DomEvent.offsetX"></field> /// <field name="offsetY" type="Number" integer="true" locid="F:J#Sys.UI.DomEvent.offsetY"></field> /// <field name="screenX" type="Number" integer="true" locid="F:J#Sys.UI.DomEvent.screenX"></field> /// <field name="screenY" type="Number" integer="true" locid="F:J#Sys.UI.DomEvent.screenY"></field> /// <field name="shiftKey" type="Boolean" locid="F:J#Sys.UI.DomEvent.shiftKey"></field> /// <field name="target" locid="F:J#Sys.UI.DomEvent.target"></field> /// <field name="type" type="String" locid="F:J#Sys.UI.DomEvent.type"></field> var e = Function._validateParams(arguments, [ {name: "eventObject"} ]); if (e) throw e; var e = eventObject; var etype = this.type = e.type.toLowerCase(); this.rawEvent = e; this.altKey = e.altKey; if (typeof(e.button) !== 'undefined') { this.button = (typeof(e.which) !== 'undefined') ? e.button : (e.button === 4) ? Sys.UI.MouseButton.middleButton : (e.button === 2) ? Sys.UI.MouseButton.rightButton : Sys.UI.MouseButton.leftButton; } if (etype === 'keypress') { this.charCode = e.charCode || e.keyCode; } else if (e.keyCode && (e.keyCode === 46)) { this.keyCode = 127; } else { this.keyCode = e.keyCode; } this.clientX = e.clientX; this.clientY = e.clientY; this.ctrlKey = e.ctrlKey; this.target = e.target ? e.target : e.srcElement; if (!etype.startsWith('key')) { if ((typeof(e.offsetX) !== 'undefined') && (typeof(e.offsetY) !== 'undefined')) { this.offsetX = e.offsetX; this.offsetY = e.offsetY; } else if (this.target && (this.target.nodeType !== 3) && (typeof(e.clientX) === 'number')) { var loc = Sys.UI.DomElement.getLocation(this.target); var w = Sys.UI.DomElement._getWindow(this.target); this.offsetX = (w.pageXOffset || 0) + e.clientX - loc.x; this.offsetY = (w.pageYOffset || 0) + e.clientY - loc.y; } } this.screenX = e.screenX; this.screenY = e.screenY; this.shiftKey = e.shiftKey; } Note: the site does not require trusted privileges to function correctly.

  Read the article

• null pointer exception comparing two strings in java.

  - by David

  I got this error message and I'm not quite sure whats wrong: Exception in thread "main" java.lang.NullPointerException at Risk.runTeams(Risk.java:384) at Risk.blobRunner(Risk.java:220) at Risk.genRunner(Risk.java:207) at Risk.main(Risk.java:176) Here is the relevant bits of code (i will draw attention to the line numbers within the error message via comments in the code as well as inputs i put into the program while its running where relevant) public class Risk { ... public static void main (String[]arg) { String CPUcolor = CPUcolor () ; genRunner (CPUcolor) ; //line 176 ... } ... public static void genRunner (String CPUcolor) // when this method runs i select 0 and run blob since its my only option. Theres nothing wrong with this method so long as i know, this is only significant because it takes me to blob runner and because another one of our relelvent line numbers apears. { String[] strats = new String[1] ; strats[0] = "0 - Blob" ; int s = chooseStrat (strats) ; if (s == 0) blobRunner (CPUcolor) ; // this is line 207 } ... public static void blobRunner (String CPUcolor) { System.out.println ("blob Runner") ; int turn = 0 ; boolean gameOver = false ; Dice other = new Dice ("other") ; Dice a1 = new Dice ("a1") ; Dice a2 = new Dice ("a2") ; Dice a3 = new Dice ("a3") ; Dice d1 = new Dice ("d1") ; Dice d2 = new Dice ("d2") ; space (5) ; Territory[] board = makeBoard() ; IdiceRoll (other) ; String[] colors = runTeams(CPUcolor) ; //this is line 220 Card[] deck = Card.createDeck () ; System.out.println (StratUtil.canTurnIn (deck)) ; while (gameOver == false) { idler (deck) ; board = assignTerri (board, colors) ; checkBoard (board, colors) ; } } ... public static String[] runTeams (String CPUcolor) { boolean z = false ; String[] a = new String[6] ; while (z == false) { a = assignTeams () ; printOrder (a) ; boolean CPU = false ; for (int i = 0; i<a.length; i++) { if (a[i].equals(CPUcolor)) CPU = true ; //this is line 384 } if (CPU==false) { System.out.println ("ERROR YOU NEED TO INCLUDE THE COLOR OF THE CPU IN THE TURN ORDER") ; runTeams (CPUcolor) ; } System.out.println ("is this turn order correct? (Y/N)") ; String s = getIns () ; while (!((s.equals ("y")) || (s.equals ("Y")) || (s.equals ("n")) || (s.equals ("N")))) { System.out.println ("try again") ; s = getIns () ; } if (s.equals ("y") || s.equals ("Y") ) z = true ; } return a ; } ... } // This } closes the class The reason i don't think i should be getting a Null:pointerException is because in this line: a[i].equals(CPUcolor) a at index i holds a string and CPUcolor is a string. Both at this point definatly have a value neither is null. Can anyone please tell me whats going wrong?

  Read the article

• Servlet response wrapper has encoding problem

  - by John O

  A servlet response wrapper is being used in a Servlet Filter. The idea is that the response is manipulated, with a 'nonce' value being injected into forms, as part of defence against CSRF attacks. The web app is using UTF-8 everywhere. When the Servlet Filter is absent, no problems. When the filter is added, encoding issues occur. (It seems as if the response is reverting to 8859-1.) The guts of the code : final class CsrfResponseWrapper extends AbstractResponseWrapper { ... byte[] modifyResponse(byte[] aInputResponse){ ... String originalInput = new String(aInputResponse, encoding); String modifiedResult = addHiddenParamToPostedForms(originalInput); result = modifiedResult.getBytes(encoding); ... } ... } As I understand it, the transition between byte-land and String-land should specify an encoding. That is done here, as you can see, in two places. The value of the 'encoding' variable is 'UTF-8'; the alteration of the String itself is standard string manipulation (with a regex), and never specifies an encoding (addHiddenParamToPostedForms). Where am I in error about the encoding? EDIT: Here is the base class (sorry it's rather long): package hirondelle.web4j.security; import javax.servlet.ServletOutputStream; import javax.servlet.ServletResponse; import javax.servlet.http.HttpServletResponse; import javax.servlet.http.HttpServletResponseWrapper; import java.io.ByteArrayOutputStream; import java.io.IOException; import java.io.PrintWriter; /** Abstract Base Class for altering response content. (May be useful in future contexts as well. For now, keep package-private.) */ abstract class AbstractResponseWrapper extends HttpServletResponseWrapper { AbstractResponseWrapper(ServletResponse aServletResponse) throws IOException { super((HttpServletResponse)aServletResponse); fOutputStream = new ModifiedOutputStream(aServletResponse.getOutputStream()); fWriter = new PrintWriter(fOutputStream); } /** Return the modified response. */ abstract byte[] modifyResponse(byte[] aInputResponse); /** Standard servlet method. */ public final ServletOutputStream getOutputStream() { //fLogger.fine("Modified Response : Getting output stream."); if ( fWriterReturned ) { throw new IllegalStateException(); } fOutputStreamReturned = true; return fOutputStream; } /** Standard servlet method. */ public final PrintWriter getWriter() { //fLogger.fine("Modified Response : Getting writer."); if ( fOutputStreamReturned ) { throw new IllegalStateException(); } fWriterReturned = true; return fWriter; } // PRIVATE /* Well-behaved servlets return either an OutputStream or a PrintWriter, but not both. */ private PrintWriter fWriter; private ModifiedOutputStream fOutputStream; /* These items are used to implement conformance to the javadoc for ServletResponse, regarding exceptions being thrown. */ private boolean fWriterReturned; private boolean fOutputStreamReturned; /** Modified low level output stream. */ private class ModifiedOutputStream extends ServletOutputStream { public ModifiedOutputStream(ServletOutputStream aOutputStream) { fServletOutputStream = aOutputStream; fBuffer = new ByteArrayOutputStream(); } /** Must be implemented to make this class concrete. */ public void write(int aByte) { fBuffer.write(aByte); } public void close() throws IOException { if ( !fIsClosed ){ processStream(); fServletOutputStream.close(); fIsClosed = true; } } public void flush() throws IOException { if ( fBuffer.size() != 0 ){ if ( !fIsClosed ) { processStream(); fBuffer = new ByteArrayOutputStream(); } } } /** Perform the core processing, by calling the abstract method. */ public void processStream() throws IOException { fServletOutputStream.write(modifyResponse(fBuffer.toByteArray())); fServletOutputStream.flush(); } // PRIVATE // private ServletOutputStream fServletOutputStream; private ByteArrayOutputStream fBuffer; /** Tracks if this stream has been closed. */ private boolean fIsClosed = false; } }

  Read the article

• Problems with instantiating in JAVA

  - by PUPIALEX

  When running, below programme cannot reach the end of the main function.. I am new to JAVA, and cannot find its defections.. I need your help. Thanks. import java.util.*; class Schedule { public String day; private int startTime, endTime; public Schedule(String input_day, int input_start, int input_end) { day = input_day; startTime = input_start; endTime = input_end; } /* clashWith: to check whether this schedule clash with a Schedule called otherSchedule * PRE-Condition : input must be of Schedule type * POST-Condition : return true if two Schedule clash, return false if not. */ public boolean clashWith(Schedule otherSchedule) { if(this.day != otherSchedule.day || this.endTime <= otherSchedule.startTime || this.startTime >= otherSchedule.endTime) return false; return true; } } class Module { String code; Schedule lecture, tutorial, lab; public Module(String input_code, Schedule input_lecture, Schedule input_tutorial, Schedule input_lab) { code = input_code; lecture = input_lecture; tutorial = input_tutorial; lab = input_lab; } /* count: to count number of classes(lecture, tutorial, and lab of only this Module) on day. * For example: when day = "Monday", lecture is on Monday, tutorial is on Monday * but lab is on Tuesday, then return 2. (lecture and tutorial are on Monday). * PRE-Condition : * POST-Condition : */ public int count(String day) { int num = 0; if(lecture.day == day) num++; if(tutorial.day == day) num++; if(lab.day == day) num++; return num; } /* clashWith: to check whether this module clash with a Module called otherModule * PRE-Condition : * POST-Condition : */ public boolean clashWith(Module otherModule) { if(lecture.clashWith(otherModule.lecture) || lecture.clashWith(otherModule.tutorial) || lecture.clashWith(otherModule.lab) ) return true; if(tutorial.clashWith(otherModule.lecture) || tutorial.clashWith(otherModule.tutorial) || tutorial.clashWith(otherModule.lab)) return true; if(lab.clashWith(otherModule.lecture) || lab.clashWith(otherModule.tutorial) || lab.clashWith(otherModule.lab)) return true; return false; } } class Timetable { Vector<Module> listOfModule; public Timetable() { } /* checkClash: to check whether otherModule clash with one of * the modules in our timetable list. * PRE-Condition : * POST-Condition : */ public boolean checkClash(Module otherModule) { for(Module c: listOfModule) if(c.clashWith(otherModule)) return true; return false; } /* add: to add a new module to the timetable list. * PRE-Condition : * POST-Condition : */ public void add(Module module) { listOfModule.add(module); } /* count: to count number of classes on day. * PRE-Condition : * POST-Condition : */ public int count(String day) { int count_day=0; for(Module c: listOfModule) count_day += c.count(day); return count_day; } } public class Main { public static void main(String[] args) { Scanner input = new Scanner(System.in); int num_operation; String code ; Timetable userTimetable = new Timetable(); num_operation = input.nextInt(); for(int i=0;i<num_operation;i++) { if(input.next() == "MODULE") { code = input.next(); String day; int start, end; Schedule getLecSche = new Schedule(input.next(),input.nextInt(),input.nextInt()); Schedule getTutSche = new Schedule(input.next(),input.nextInt(),input.nextInt()); Schedule getLabSche = new Schedule(input.next(),input.nextInt(),input.nextInt()); Module userModule = new Module(code, getLecSche, getTutSche, getLabSche); System.out.println("Reached line 162"); if(!userTimetable.checkClash(userModule)) { userTimetable.add(userModule); System.out.println("Added"); } else System.out.println("Clashed"); } else if(input.next() == "COUNT"){ code = input.next(); System.out.println(userTimetable.count(code)); } } } }

  Read the article

• Not sure I am using inheritance/polymorphism issue?

  - by planker1010

  So for this assignment I have to create a car class(parent) and a certifiedpreowned (child) and I need to have the parent class have a method to check if it is still under warranty. *checkWarrantyStatus(). that method calls the boolean isCoveredUnderWarranty() to veryify if the car still has warranty. My issue is in the certifiedpreowned class I have to call the isCoveredUnderWarranty() as well to see if it is covered under the extended warranty and then have it be called via the checkWarrantyStatus() in the car method. I hope this makes sense. So to sum it up I need to in the child class have it check the isCoveredUnderWarranty with extended warranty info. Then it has to move to the parent class so it can be called via checkWarrantyStatus. Here is my code, I have 1 error. public class Car { public int year; public String make; public String model; public int currentMiles; public int warrantyMiles; public int warrantyYears; int currentYear =java.util.Calendar.getInstance().get(java.util.Calendar.YEAR); /** construct car object with specific parameters*/ public Car (int y, String m, String mod, int mi){ this.year = y; this.make = m; this.model = mod; this.currentMiles = mi; } public int getWarrantyMiles() { return warrantyMiles; } public void setWarrantyMiles(int warrantyMiles) { this.warrantyMiles = warrantyMiles; } public int getWarrantyYears() { return warrantyYears; } public void setWarrantyYears(int warrantyYears) { this.warrantyYears = warrantyYears; } public boolean isCoveredUnderWarranty(){ if (currentMiles < warrantyMiles){ if (currentYear < (year+ warrantyYears)) return true; } return false; } public void checkWarrantyStatus(){ if (isCoveredUnderWarranty()){ System.out.println("Your car " + year+ " " + make+ " "+ model+ " With "+ currentMiles +" is still covered under warranty"); } else System.out.println("Your car " + year+ " " + make+ " "+ model+ " With "+ currentMiles +" is out of warranty"); } } public class CertifiedPreOwnCar extends Car{ public CertifiedPreOwnCar(int y, String m, String mod, int mi) { super(mi, m, mod, y); } public int extendedWarrantyYears; public int extendedWarrantyMiles; public int getExtendedWarrantyYears() { return extendedWarrantyYears; } public void setExtendedWarrantyYears(int extendedWarrantyYears) { this.extendedWarrantyYears = extendedWarrantyYears; } public int getExtendedWarrantyMiles() { return extendedWarrantyMiles; } public void setExtendedWarrantyMiles(int extendedWarrantyMiles) { this.extendedWarrantyMiles = extendedWarrantyMiles; } public boolean isCoveredUnderWarranty() { if (currentMiles < extendedWarrantyMiles){ if (currentYear < (year+ extendedWarrantyYears)) return true; } return false; } } public class TestCar { public static void main(String[] args) { Car car1 = new Car(2014, "Honda", "Civic", 255); car1.setWarrantyMiles(60000); car1.setWarrantyYears(5); car1.checkWarrantyStatus(); Car car2 = new Car(2000, "Ferrari", "F355", 8500); car2.setWarrantyMiles(20000); car2.setWarrantyYears(7); car2.checkWarrantyStatus(); CertifiedPreOwnCar car3 = new CertifiedPreOwnCar(2000, "Honda", "Accord", 65000); car3.setWarrantyYears(3); car3.setWarrantyMiles(30000); car3.setExtendedWarrantyMiles(100000); car3.setExtendedWarrantyYears(7); car3.checkWarrantyStatus(); } }

  Read the article

• DisplayObject not being displayed in AS3

  - by MarkSteve

  I have this class: public class IskwabolText extends Sprite { private var _tf:TextField; private var _tfmt:TextFormat; private var _size:Number; private var _text:String; public function IskwabolText(params:Object) { var defaultParams:Object = { color: 0x000000, background: false, backgroundColor: 0xFFFFFF, width: 0, height: 0, multiline: false, wordWrap: false }; // textfield _tf = new TextField(); _tf.antiAliasType = 'advanced'; _tf.embedFonts = true; _tf.type = 'dynamic'; _tf.selectable = false; // textformat _tfmt = new TextFormat(); set(defaultParams); set(params); } public function get(param:String):Object { switch (param) { case 'size': return _tfmt.size; case 'text': return _tf.text; case 'font': return _tfmt.font; case 'color': return _tfmt.color; case 'background': return _tf.background; case 'backgroundColor': return _tf.backgroundColor; case 'width': return _tf.width; case 'height': return _tf.height; case 'multiline': return _tf.multiline; case 'wordWrap': return _tf.multiline; default: return this[param]; } return null; } public function set(params:Object):Object { for (var i:String in params) { setParam(i, params[i]); } redraw(); return this; } private function setParam(param:String, value:Object):Object { switch (param) { case 'size': _tfmt.size = new String(value); break; case 'text': _tf.text = new String(value); break; case 'font': _tfmt.font = new String(value); break; case 'color': _tfmt.color = new uint(value); break; case 'background': _tf.background = new Boolean(value); break; case 'backgroundColor': _tf.backgroundColor = new uint(value); break; case 'width': _tf.width = new Number(value); break; case 'height': _tf.height = new Number(value); break; case 'multiline': _tf.multiline = new Boolean(value); break; case 'wordWrap': _tf.multiline = new Boolean(value); break; default: this[param] = value; break; } return this; } private function redraw():void { _tf.setTextFormat(_tfmt); if (contains(_tf)) removeChild(_tf); if (_tf.width == 0) _tf.width= _tf.textWidth+5; _tf.height = _tf.textHeight; addChild(_tf); } } But when I do this: public class Main extends Sprite { public function Main() { addChild(new IskwabolText({ size: 100, text: 'iskwabol', font: 'Default', // this is properly embedded color: 0x000000, x: stage.stageWidth / 2 - this.width / 2, y: 140 })); } } The child IskwabolText doesn't get displayed. What happening?

  Read the article

• Point of contact of 2 OBBs?

  - by Milo

  I'm working on the physics for my GTA2-like game so I can learn more about game physics. The collision detection and resolution are working great. I'm now just unsure how to compute the point of contact when I hit a wall. Here is my OBB class: public class OBB2D { private Vector2D projVec = new Vector2D(); private static Vector2D projAVec = new Vector2D(); private static Vector2D projBVec = new Vector2D(); private static Vector2D tempNormal = new Vector2D(); private Vector2D deltaVec = new Vector2D(); // Corners of the box, where 0 is the lower left. private Vector2D corner[] = new Vector2D[4]; private Vector2D center = new Vector2D(); private Vector2D extents = new Vector2D(); private RectF boundingRect = new RectF(); private float angle; //Two edges of the box extended away from corner[0]. private Vector2D axis[] = new Vector2D[2]; private double origin[] = new double[2]; public OBB2D(float centerx, float centery, float w, float h, float angle) { for(int i = 0; i < corner.length; ++i) { corner[i] = new Vector2D(); } for(int i = 0; i < axis.length; ++i) { axis[i] = new Vector2D(); } set(centerx,centery,w,h,angle); } public OBB2D(float left, float top, float width, float height) { for(int i = 0; i < corner.length; ++i) { corner[i] = new Vector2D(); } for(int i = 0; i < axis.length; ++i) { axis[i] = new Vector2D(); } set(left + (width / 2), top + (height / 2),width,height,0.0f); } public void set(float centerx,float centery,float w, float h,float angle) { float vxx = (float)Math.cos(angle); float vxy = (float)Math.sin(angle); float vyx = (float)-Math.sin(angle); float vyy = (float)Math.cos(angle); vxx *= w / 2; vxy *= (w / 2); vyx *= (h / 2); vyy *= (h / 2); corner[0].x = centerx - vxx - vyx; corner[0].y = centery - vxy - vyy; corner[1].x = centerx + vxx - vyx; corner[1].y = centery + vxy - vyy; corner[2].x = centerx + vxx + vyx; corner[2].y = centery + vxy + vyy; corner[3].x = centerx - vxx + vyx; corner[3].y = centery - vxy + vyy; this.center.x = centerx; this.center.y = centery; this.angle = angle; computeAxes(); extents.x = w / 2; extents.y = h / 2; computeBoundingRect(); } //Updates the axes after the corners move. Assumes the //corners actually form a rectangle. private void computeAxes() { axis[0].x = corner[1].x - corner[0].x; axis[0].y = corner[1].y - corner[0].y; axis[1].x = corner[3].x - corner[0].x; axis[1].y = corner[3].y - corner[0].y; // Make the length of each axis 1/edge length so we know any // dot product must be less than 1 to fall within the edge. for (int a = 0; a < axis.length; ++a) { float l = axis[a].length(); float ll = l * l; axis[a].x = axis[a].x / ll; axis[a].y = axis[a].y / ll; origin[a] = corner[0].dot(axis[a]); } } public void computeBoundingRect() { boundingRect.left = JMath.min(JMath.min(corner[0].x, corner[3].x), JMath.min(corner[1].x, corner[2].x)); boundingRect.top = JMath.min(JMath.min(corner[0].y, corner[1].y),JMath.min(corner[2].y, corner[3].y)); boundingRect.right = JMath.max(JMath.max(corner[1].x, corner[2].x), JMath.max(corner[0].x, corner[3].x)); boundingRect.bottom = JMath.max(JMath.max(corner[2].y, corner[3].y),JMath.max(corner[0].y, corner[1].y)); } public void set(RectF rect) { set(rect.centerX(),rect.centerY(),rect.width(),rect.height(),0.0f); } // Returns true if other overlaps one dimension of this. private boolean overlaps1Way(OBB2D other) { for (int a = 0; a < axis.length; ++a) { double t = other.corner[0].dot(axis[a]); // Find the extent of box 2 on axis a double tMin = t; double tMax = t; for (int c = 1; c < corner.length; ++c) { t = other.corner[c].dot(axis[a]); if (t < tMin) { tMin = t; } else if (t > tMax) { tMax = t; } } // We have to subtract off the origin // See if [tMin, tMax] intersects [0, 1] if ((tMin > 1 + origin[a]) || (tMax < origin[a])) { // There was no intersection along this dimension; // the boxes cannot possibly overlap. return false; } } // There was no dimension along which there is no intersection. // Therefore the boxes overlap. return true; } public void moveTo(float centerx, float centery) { float cx,cy; cx = center.x; cy = center.y; deltaVec.x = centerx - cx; deltaVec.y = centery - cy; for (int c = 0; c < 4; ++c) { corner[c].x += deltaVec.x; corner[c].y += deltaVec.y; } boundingRect.left += deltaVec.x; boundingRect.top += deltaVec.y; boundingRect.right += deltaVec.x; boundingRect.bottom += deltaVec.y; this.center.x = centerx; this.center.y = centery; computeAxes(); } // Returns true if the intersection of the boxes is non-empty. public boolean overlaps(OBB2D other) { if(right() < other.left()) { return false; } if(bottom() < other.top()) { return false; } if(left() > other.right()) { return false; } if(top() > other.bottom()) { return false; } if(other.getAngle() == 0.0f && getAngle() == 0.0f) { return true; } return overlaps1Way(other) && other.overlaps1Way(this); } public Vector2D getCenter() { return center; } public float getWidth() { return extents.x * 2; } public float getHeight() { return extents.y * 2; } public void setAngle(float angle) { set(center.x,center.y,getWidth(),getHeight(),angle); } public float getAngle() { return angle; } public void setSize(float w,float h) { set(center.x,center.y,w,h,angle); } public float left() { return boundingRect.left; } public float right() { return boundingRect.right; } public float bottom() { return boundingRect.bottom; } public float top() { return boundingRect.top; } public RectF getBoundingRect() { return boundingRect; } public boolean overlaps(float left, float top, float right, float bottom) { if(right() < left) { return false; } if(bottom() < top) { return false; } if(left() > right) { return false; } if(top() > bottom) { return false; } return true; } public static float distance(float ax, float ay,float bx, float by) { if (ax < bx) return bx - ay; else return ax - by; } public Vector2D project(float ax, float ay) { projVec.x = Float.MAX_VALUE; projVec.y = Float.MIN_VALUE; for (int i = 0; i < corner.length; ++i) { float dot = Vector2D.dot(corner[i].x,corner[i].y,ax,ay); projVec.x = JMath.min(dot, projVec.x); projVec.y = JMath.max(dot, projVec.y); } return projVec; } public Vector2D getCorner(int c) { return corner[c]; } public int getNumCorners() { return corner.length; } public static float collisionResponse(OBB2D a, OBB2D b, Vector2D outNormal) { float depth = Float.MAX_VALUE; for (int i = 0; i < a.getNumCorners() + b.getNumCorners(); ++i) { Vector2D edgeA; Vector2D edgeB; if(i >= a.getNumCorners()) { edgeA = b.getCorner((i + b.getNumCorners() - 1) % b.getNumCorners()); edgeB = b.getCorner(i % b.getNumCorners()); } else { edgeA = a.getCorner((i + a.getNumCorners() - 1) % a.getNumCorners()); edgeB = a.getCorner(i % a.getNumCorners()); } tempNormal.x = edgeB.x -edgeA.x; tempNormal.y = edgeB.y - edgeA.y; tempNormal.normalize(); projAVec.equals(a.project(tempNormal.x,tempNormal.y)); projBVec.equals(b.project(tempNormal.x,tempNormal.y)); float distance = OBB2D.distance(projAVec.x, projAVec.y,projBVec.x,projBVec.y); if (distance > 0.0f) { return 0.0f; } else { float d = Math.abs(distance); if (d < depth) { depth = d; outNormal.equals(tempNormal); } } } float dx,dy; dx = b.getCenter().x - a.getCenter().x; dy = b.getCenter().y - a.getCenter().y; float dot = Vector2D.dot(dx,dy,outNormal.x,outNormal.y); if(dot > 0) { outNormal.x = -outNormal.x; outNormal.y = -outNormal.y; } return depth; } public Vector2D getMoveDeltaVec() { return deltaVec; } }; Thanks!

  Read the article

• Dotfuscator Deep Dive with WP7

  - by Bil Simser

  I thought I would share some experience with code obfuscation (specifically the Dotfuscator product) and Windows Phone 7 apps. These days twitter is a buzz with black hat and white operations coming out about how the marketplace is insecure and Microsoft failed, blah, blah, blah. So it’s that much more important to protect your intellectual property. You should protect it no matter what when releasing apps into the wild but more so when someone is paying for them. You want to protect the time and effort that went into your code and have some comfort that the casual hacker isn’t going to usurp your next best thing. Enter code obfuscation. Code obfuscation is one tool that can help protect your IP. Basically it goes into your compiled assemblies, rewrites things at an IL level (like renaming methods and classes and hiding logic flow) and rewrites it back so that the assembly or executable is still fully functional but prying eyes using a tool like ILDASM or Reflector can’t see what’s going on.  You can read more about code obfuscation here on Wikipedia. A word to the wise. Code obfuscation isn’t 100% secure. More so on the WP7 platform where the OS expects certain things to be as they were meant to be. So don’t expect 100% obfuscation of every class and every method and every property. It’s just not going to happen. What this does do is give you some level of protection but don’t put all your eggs in one basket and call it done. Like I said, this is just one step in the process. There are a few tools out there that provide code obfuscation and support the Windows Phone 7 platform (see links to other tools at the end of this post). One such tool is Dotfuscator from PreEmptive solutions. The thing about Dotfuscator is that they’ve struck a deal with Microsoft to provide a *free* copy of their commercial product for Windows Phone 7. The only drawback is that it only runs until March 31, 2010. However it’s a good place to start and the focus of this article. Getting Started When you fire up Dotfuscator you’re presented with a dialog to start a new project or load a previous one. We’ll start with a new project. You’re then looking at a somewhat blank screen that shows an Input tab (among others) and you’re probably wondering what to do? Click on the folder icon (first one) and browse to where your xap file is. At this point you can save the project and click on the arrow to start the process. Bam! You’re done. Right? Think again. The program did indeed run and create a new version of your xap (doing it’s thing and rewriting back your *obfuscated* assemblies) but let’s take a look at the assembly in Reflector to see the end result. Remember a xap file is really just a glorified zip file (or cab file if you prefer). When you ran Dotfuscator for the first time with the default settings you’ll see it created a new version of your xap in a folder under “My Documents” called “Dotfuscated” (you can configure the output directory in settings). Here’s the new xap file. Since a xap is just a zip, rename it to .cab or .zip or something and open it with your favorite unarchive program (I use WinRar but it doesn’t matter as long as it can unzip files). If you already have the xap file associated with your unarchive tool the rename isn’t needed. Once renamed extract the contents of the xap to your hard drive: Now you’ll have a folder with the contents of the xap file extracted: Double click or load up your assembly (WindowsPhoneDataBoundApplication1.dll in the example) in Reflector and let’s see the results: Hmm. That doesn’t look right. I can see all the methods and the code is all there for my LoadData method I wanted to protect. Product failure. Let’s return it for a refund. Hold your horses. We need to check out the settings in the program first. Remember when we loaded up our xap file. It started us on the Input tab but there was a settings tab before that. Wonder what it does? Here’s the default settings: Renaming Taking a closer look, all of the settings in Feature are disabled. WTF? Yeah, it leaves me scratching my head why an obfuscator by default doesn’t obfuscate. However it’s a simple fix to change these settings. Let’s enable Renaming as it sounds like a good start. Renaming obscures code by renaming methods and fields to names that are not understandable. Great. Run the tool again and go through the process of unzipping the updated xap and let’s take a look in Reflector again at our project. This looks a lot better. Lots of methods named a, b, c, d, etc. That’ll help slow hackers down a bit. What about our logic that we spent days weeks on? Let’s take a look at the LoadData method: What gives? We have renaming enabled but all of our code is still there. If you look through all your methods you’ll find it’s still sitting there out in the open. Control Flow Back to the settings page again. Let’s enable Control Flow now. Control Flow obfuscation synthesizes branching, conditional, and iterative constructs (such as if, for, and while) that produce valid executable logic, but yield non-deterministic semantic results when decompilation is attempted. In other words, the code runs as before, but decompilers cannot reproduce the original code. Do the dance again and let’s see the results in Reflector. Ahh, that’s better. Methods renamed *and* nobody can look at our LoadData method now. Life is good. More than Minimum This is the bare minimum to obfuscate your xap to at least a somewhat comfortable level. However I did find that while this worked in my Hello World demo, it didn’t work on one of my real world apps. I had to do some extra tweaking with that. Below are the screens that I used on one app that worked. I’m not sure what it was about the app that the approach above didn’t work with (maybe the extra assembly?) but it works and I’m happy with it. YMMV. Remember to test your obfuscated app on your device first before submitting to ensure you haven’t obfuscated the obfuscator. settings tab: rename tab: string encryption tab: premark tab: A few final notes Play with the settings and keep bumping up the bar to try to get as much obfuscation as you can. The more the better but remember you can overdo it. Always (always, always, always) deploy your obfuscated xap to your device and test it before submitting to the marketplace. I didn’t and got rejected because I had gone overboard with the obfuscation so the app wouldn’t launch at all. Not everything is going to be obfuscated. Specifically I don’t see a way to obfuscate auto properties and a few other language features. Again, if you crank the settings up you might hide these but I haven’t spent a lot of time optimizing the process. Some people might say to obfuscate your xaml using string encryption but again, test, test, test. Xaml is picky so too much obfuscation (or any) might disable your app or produce odd rendering effets. Remember, obfuscation is not 100% secure! Don’t rely on it as a sole way of protecting your assets. Other Tools Dotfuscator is one just product and isn’t the end-all be-all to obfuscation so check out others below. For example, Crypto can make it so Reflector doesn’t even recognize the app as a .NET one and won’t open it. Others can encrypt resources and Xaml markup files. Here are some other obfuscators that support the Windows Phone 7 platform. Feel free to give them a try and let people know your experience with them! Dotfuscator Windows Phone Edition Crypto Obfuscator for .NET DeepSea Obfuscation

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #049

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Two Connections Related Global Variables Explained – @@CONNECTIONS and @@MAX_CONNECTIONS @@CONNECTIONS Returns the number of attempted connections, either successful or unsuccessful since SQL Server was last started. @@MAX_CONNECTIONS Returns the maximum number of simultaneous user connections allowed on an instance of SQL Server. The number returned is not necessarily the number currently configured. Query Editor – Microsoft SQL Server Management Studio This post may be very simple for most of the users of SQL Server 2005. Earlier this year, I have received one question many times – Where is Query Analyzer in SQL Server 2005? I wrote small post about it and pointed many users to that post – SQL SERVER – 2005 Query Analyzer – Microsoft SQL SERVER Management Studio. Recently I have been receiving similar question. OUTPUT Clause Example and Explanation with INSERT, UPDATE, DELETE SQL Server 2005 has a new OUTPUT clause, which is quite useful. OUTPUT clause has access to insert and deleted tables (virtual tables) just like triggers. OUTPUT clause can be used to return values to client clause. OUTPUT clause can be used with INSERT, UPDATE, or DELETE to identify the actual rows affected by these statements. OUTPUT clause can generate a table variable, a permanent table, or temporary table. Even though, @@Identity will still work with SQL Server 2005, however I find the OUTPUT clause very easy and powerful to use. Let us understand the OUTPUT clause using an example. Find Name of The SQL Server Instance Based on database server stored procedures has to run different logic. We came up with two different solutions. 1) When database schema is very much changed, we wrote completely new stored procedure and deprecated older version once it was not needed. 2) When logic depended on Server Name we used global variable @@SERVERNAME. It was very convenient while writing migrating script which depended on the server name for the same database. Explanation of TRY…CATCH and ERROR Handling With RAISEERROR Function One of the developers at my company thought that we can not use the RAISEERROR function in new feature of SQL Server 2005 TRY… CATCH. When asked for an explanation he suggested SQL SERVER – 2005 Explanation of TRY… CATCH and ERROR Handling article as excuse suggesting that I did not give example of RAISEERROR with TRY…CATCH. We all thought it was funny. Just to keep records straight, TRY… CATCH can sure use RAISEERROR function. Different Types of Cache Objects Serveral kinds of objects can be stored in the procedure cache: Compiled Plans: When the query optimizer finishes compiling a query plan, the principal output is compiled plan. Execution contexts: While executing a compiled plan, SQL Server has to keep track of information about the state of execution. Cursors: Cursors track the execution state of server-side cursors, including the cursor’s current location within a resultset. Algebrizer trees: The Algebrizer’s job is to produce an algebrizer tree, which represents the logic structure of a query. Open SSMS From Command Prompt – sqlwb.exe Example This article is written by request and suggestion of Sr. Web Developer at my organization. Due to the nature of this article most of the content is referred from Book On-Line. sqlwbcommand prompt utility which opens SQL Server Management Studio. Squib command does not run queries from the command prompt. sqlcmd utility runs queries from command prompt, read for more information. 2008 Puzzle – Solution – Computed Columns Datatype Explanation Just a day before I wrote article SQL SERVER – Puzzle – Computed Columns Datatype Explanation which was inspired by SQL Server MVP Jacob Sebastian. I suggest that before continuing this article read the original puzzle question SQL SERVER – Puzzle – Computed Columns Datatype Explanation.The question was if the computed column was of datatype TINYINT how to create a Computed Column of datatype INT? 2008 – Find If Index is Being Used in Database It is very often I get a query that how to find if any index is being used in the database or not. If any database has many indexes and not all indexes are used it can adversely affect performance. If the number of indices are higher it reduces the INSERT / UPDATE / DELETE operation but increase the SELECT operation. It is recommended to drop any unused indexes from table to improve the performance. 2009 Interesting Observation – Execution Plan and Results of Aggregate Concatenation Queries If you want to see what’s going on here, I think you need to shift your point of view from an implementation-centric view to an ANSI point of view. ANSI does not guarantee processing the order. Figure 2 is interesting, but it will be potentially misleading if you don’t understand the ANSI rule-set SQL Server operates under in most cases. Implementation thinking can certainly be useful at times when you really need that multi-million row query to finish before the backup fire off, but in this case, it’s counterproductive to understanding what is going on. SQL Server Management Studio and Client Statistics Client Statistics are very important. Many a times, people relate queries execution plan to query cost. This is not a good comparison. Both parameters are different, and they are not always related. It is possible that the query cost of any statement is less, but the amount of the data returned is considerably larger, which is causing any query to run slow. How do we know if any query is retrieving a large amount data or very little data? 2010 I encourage all of you to go through complete series and write your own on the subject. If you write an article and send it to me, I will publish it on this blog with due credit to you. If you write on your own blog, I will update this blog post pointing to your blog post. SQL SERVER – ORDER BY Does Not Work – Limitation of the View 1 SQL SERVER – Adding Column is Expensive by Joining Table Outside View – Limitation of the View 2 SQL SERVER – Index Created on View not Used Often – Limitation of the View 3 SQL SERVER – SELECT * and Adding Column Issue in View – Limitation of the View 4 SQL SERVER – COUNT(*) Not Allowed but COUNT_BIG(*) Allowed – Limitation of the View 5 SQL SERVER – UNION Not Allowed but OR Allowed in Index View – Limitation of the View 6 SQL SERVER – Cross Database Queries Not Allowed in Indexed View – Limitation of the View 7 SQL SERVER – Outer Join Not Allowed in Indexed Views – Limitation of the View 8 SQL SERVER – SELF JOIN Not Allowed in Indexed View – Limitation of the View 9 SQL SERVER – Keywords View Definition Must Not Contain for Indexed View – Limitation of the View 10 SQL SERVER – View Over the View Not Possible with Index View – Limitations of the View 11 SQL SERVER – Get Query Running in Session I was recently looking for syntax where I needed a query running in any particular session. I always remembered the syntax and ha d actually written it down before, but somehow it was not coming to mind quickly this time. I searched online and I ended up on my own article written last year SQL SERVER – Get Last Running Query Based on SPID. I felt that I am getting old because I forgot this really simple syntax. Find Total Number of Transaction on Interval In one of my recent Performance Tuning assignments I was asked how do someone know how many transactions are happening on a server during certain interval. I had a handy script for the same. Following script displays transactions happened on the server at the interval of one minute. You can change the WAITFOR DELAY to any other interval and it should work. 2011 Here are two DMV’s which are newly introduced in SQL Server 2012 and provides vital information about SQL Server. DMV – sys.dm_os_volume_stats – Information about operating system volume DMV – sys.dm_os_windows_info – Information about Operating System SQL Backup and FTP – A Quick and Handy Tool I have used this tool extensively since 2009 at numerous occasion and found it to be very impressive. What separates it from the crowd the most – it is it’s apparent simplicity and speed. When I install SQLBackupAndFTP and configure backups – all in 1 or 2 minutes, my clients are always impressed. Quick Note about JOIN – Common Questions and Simple Answers In this blog post we are going to talk about join and lots of things related to the JOIN. I recently started office hours to answer questions and issues of the community. I receive so many questions that are related to JOIN. I will share a few of the same over here. Most of them are basic, but note that the basics are of great importance. 2012 Importance of User Without Login Question: “In recent version of SQL Server we can create user without login. What is the use of it?” Great question indeed. Let me first attempt to answer this question but after reading my answer I need your help. I want you to help him as well with adding more value to it. Preserve Leading Zero While Coping to Excel from SSMS Earlier I wrote two articles about how to efficiently copy data from SSMS to Excel. Since I wrote that post there are plenty of interest generated on this subject. There are a few questions I keep on getting over this subject. One of the question is how to get the leading zero preserved while copying the data from SSMS to Excel. Well it is almost the same way as my earlier post SQL SERVER – Excel Losing Decimal Values When Value Pasted from SSMS ResultSet. The key here is in EXCEL and not in SQL Server. Solution – 2 T-SQL Puzzles – Display Star and Shortest Code to Display 1 Earlier on this blog we had asked two puzzles. The response from all of you is nothing but Amazing. I have received 350+ responses. Many are valid and many were indeed something I had not thought about it. I strongly suggest you read all the puzzles and their answers here - trust me if you start reading the comments you will not stop till you read every single comment. Seriously trust me on it. Personally I have learned a lot from it. Identify Most Resource Intensive Queries – SQL in Sixty Seconds #028 – Video http://www.youtube.com/watch?v=TvlYy-TGaaA Importance of User Without Login – T-SQL Demo Script Earlier I wrote a blog post about SQL SERVER – Importance of User Without Login and my friend and SQL Expert Vinod Kumar has written excellent follow up blog post about Contained Databases inside SQL Server 2012. Now lots of people asked me if I can also explain the same concept again so here is the small demonstration for it. Let me show you how login without user can help. Before we continue on this subject I strongly recommend that you read my earlier blog post here. In following demo I am going to demonstrate following situation. Login using the System Admin account Create a user without login Checking Access Impersonate the user without login Checking Access Revert Impersonation Give Permission to user without login Impersonate the user without login Checking Access Revert Impersonation Clean up Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Monitoring SQL Server Agent job run times

  - by okeofs

  Introduction A few months back, I was asked how long a particular nightly process took to run. It was a super question and the one thing that struck me was that there were a plethora of factors affecting the processing time. This said, I developed a query to ascertain process run times, the average nightly run times and applied some KPI’s to the end query. The end goal being to enable me to quickly detect anomalies and processes that are running beyond their normal times. As many of you are aware, most of the necessary data for this type of query, lies within the MSDB database. The core portion of the query is shown below.select sj.name,sh.run_date, sh.run_duration, case when len(sh.run_duration) = 6 then convert(varchar(8),sh.run_duration) when len(sh.run_duration) = 5 then '0' + convert(varchar(8),sh.run_duration) when len(sh.run_duration) = 4 then '00' + convert(varchar(8),sh.run_duration) when len(sh.run_duration) = 3 then '000' + convert(varchar(8),sh.run_duration) when len(sh.run_duration) = 2 then '0000' + convert(varchar(8),sh.run_duration) when len(sh.run_duration) = 1 then '00000' + convert(varchar(8),sh.run_duration) end as tt from dbo.sysjobs sj with (nolock) inner join dbo.sysjobHistory sh with (nolock) on sj.job_id = sh.job_id where sj.name = 'My Agent Job' and [sh.Message] like '%The job%') Run_date and run_duration are obvious fields. The field ‘Name’ is the name of the job that we wish to follow. The only major challenge was that the format of the run duration which was not as ‘user friendly’ as I would have liked. As an example, the run duration 1 hour 10 minutes and 3 seconds would be displayed as 11003; whereas I wanted it to display this in a more user friendly manner as 01:10:03. In order to achieve this effect, we need to add leading zeros to the run_duration based upon the case logic shown above. At this point what we need to do add colons between the hours and minutes and one between the minutes and seconds. To achieve this I nested the query shown above (in purple) within a ‘super’ query. Thus the run time ([Run Time]) is constructed concatenating a series of substrings (See below in Blue). select run_date,substring(convert(varchar(20),tt),1,2) + ':' +substring(convert(varchar(20),tt),3,2) + ':' +substring(convert(varchar(20),tt),5,2) as [run_time] from (select sj.name,sh.run_date, sh.run_duration,case when len(sh.run_duration) = 6 then convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 5 then '0' + convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 4 then '00' + convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 3 then '000' + convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 2 then '0000' + convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 1 then '00000' + convert(varchar(8),sh.run_duration)end as ttfrom dbo.sysjobs sj with (nolock)inner join dbo.sysjobHistory sh with (nolock) on sj.job_id = sh.job_id where sj.name = 'My Agent Job'and [sh.Message] like '%The job%') a Now that I had each nightly run time in hours, minutes and seconds (01:10:03), I decided that it would very productive to calculate a rolling run time average. To do this, I decided to do the calculations in base units of seconds. This said, I encapsulated the query shown above into a further ‘super’ query (see the code in RED below). This encapsulation is shown below. The astute reader will note that I used implied casting from integer to string, which is not the best method to use however it works. This said and if I were constructing the query again I would definitely do an explicit convert. To Recap: I now have a key field of ‘1’, each and every applicable run date and the total number of SECONDS that the process ran for each run date, all of this data within the #rawdata1 temporary table. Select 1 as keyy,run_date,(substring(b.run_time,1,2)*3600) + (substring(b.run_time,4,2)*60) + (substring(b.run_time,7,2)) as run_time_in_Seconds,run_time into #rawdata1 from ( select run_date,substring(convert(varchar(20),tt),1,2) + ':' + substring(convert(varchar(20),tt),3,2) + ':' +substring(convert(varchar(20),tt),5,2) as [run_time] from (select sj.name,sh.run_date, sh.run_duration, case when len(sh.run_duration) = 6 then convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 5 then '0' + convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 4 then '00' + convert(varchar(8),sh.run_duration)when len(sh.run_duration)    = 3 then '000' + convert(varchar(8),sh.run_duration)when len(sh.run_duration)    = 2 then '0000' + convert(varchar(8),sh.run_duration)when len(sh.run_duration) = 1 then '00000' + convert(varchar(8),sh.run_duration)end as ttfrom dbo.sysjobs sj with (nolock)inner join dbo.sysjobHistory sh with (nolock)on sj.job_id = sh.job_id where sj.name = 'My Agent Job'and [sh.Message] like '%The job%') a )b   Calculating the average run time We now select each run time in seconds from #rawdata1 and place the values into another temporary table called #rawdata2. Once again we create a ‘key’, a hardwired ‘1’. select 1 as Keyy, run_time_in_Seconds into #rawdata2 from #rawdata1The purpose of doing so is to make the average time AVG() available to the query immediately without having to do adverse grouping. Applying KPI Logic At this point, we shall apply some logic to determine whether processing times are within the norms. We do this by applying colour names. Obviously, this example is a super one for SSRS and traffic light icons.select rd1.run_date, rd1.run_time, rd1.run_time_in_Seconds ,Avg(rd2.run_time_in_Seconds) as Average_run_time_in_seconds,casewhenConvert(decimal(10,1),rd1.run_time_in_Seconds)/Avg(rd2.run_time_in_Seconds)<= 1.2 then 'Green' when Convert(decimal(10,1),rd1.run_time_in_Seconds)/Avg(rd2.run_time_in_Seconds)< 1.4 then 'Yellow' else 'Red'end as [color], Calculating the Average Run Time in Hours Minutes and Seconds and the end of the query. casewhen len(convert(varchar(2),Avg(rd2.run_time_in_Seconds)/(3600))) = 1 then '0' + convert(varchar(2),Avg(rd2.run_time_in_Seconds)/(3600))else convert(varchar(2),Avg(rd2.run_time_in_Seconds)/(3600))end + ':' + case when len(convert(varchar(2),Avg(rd2.run_time_in_Seconds)%(3600)/60)) = 1 then '0' + convert(varchar(2),Avg(rd2.run_time_in_Seconds)%(3600)/60)else convert(varchar(2),Avg(rd2.run_time_in_Seconds)%(3600)/60)end + ':' + case when len(convert(varchar(2),Avg(rd2.run_time_in_Seconds)%60)) = 1 then '0' + convert(varchar(2),Avg(rd2.run_time_in_Seconds)%60)else convert(varchar(2),Avg(rd2.run_time_in_Seconds)%60)end as [Average Run Time HH:MM:SS] from #rawdata2 rd2 innerjoin #rawdata1 rd1on rd1.keyy = rd2.keyygroup by run_date,rd1.run_time ,rd1.run_time_in_Seconds order by run_date descThe complete code example use msdbgo/*drop table #rawdata1drop table #rawdata2go*/select 1 as keyy,run_date,(substring(b.run_time,1,2)*3600) + (substring(b.run_time,4,2)*60) + (substring(b.run_time,7,2)) as run_time_in_Seconds,run_time into #rawdata1 from (select run_date,substring(convert(varchar(20),tt),1,2) + ':' +substring(convert(varchar(20),tt),3,2) + ':' +substring(convert(varchar(20),tt),5,2) as [run_time] from (select name,run_date, run_duration, casewhenlen(run_duration) = 6 then convert(varchar(8),run_duration)whenlen(run_duration) = 5 then '0' + convert(varchar(8),run_duration)whenlen(run_duration) = 4 then '00' + convert(varchar(8),run_duration)whenlen(run_duration) = 3 then '000' + convert(varchar(8),run_duration)whenlen(run_duration) = 2 then '0000' + convert(varchar(8),run_duration)whenlen(run_duration) = 1 then '00000' + convert(varchar(8),run_duration)end as ttfrom dbo.sysjobs sj with (nolock)innerjoin dbo.sysjobHistory sh with (nolock) on sj.job_id = sh.job_id where name = 'My Agent Job'and [Message] like '%The job%') a ) bselect 1 as Keyy, run_time_in_Seconds into #rawdata2 from #rawdata1select rd1.run_date, rd1.run_time, rd1.run_time_in_Seconds ,Avg(rd2.run_time_in_Seconds) as Average_run_time_in_seconds,casewhenConvert(decimal(10,1),rd1.run_time_in_Seconds)/Avg(rd2.run_time_in_Seconds)<= 1.2 then 'Green' when Convert(decimal(10,1),rd1.run_time_in_Seconds)/Avg(rd2.run_time_in_Seconds)< 1.4 then 'Yellow' else 'Red'end as [color],Case when len(convert(varchar(2),Avg(rd2.run_time_in_Seconds)/(3600))) = 1 then '0' + convert(varchar(2),Avg(rd2.run_time_in_Seconds)/(3600))else convert(varchar(2),Avg(rd2.run_time_in_Seconds)/(3600))end + ':' + case when len(convert(varchar(2),Avg(rd2.run_time_in_Seconds)%(3600)/60)) = 1 then '0' + convert(varchar(2),Avg(rd2.run_time_in_Seconds)%(3600)/60)else convert(varchar(2),Avg(rd2.run_time_in_Seconds)%(3600)/60)end + ':' + case when len(convert(varchar(2),Avg(rd2.run_time_in_Seconds)%60)) = 1 then '0' + convert(varchar(2),Avg(rd2.run_time_in_Seconds)%60)else convert(varchar(2),Avg(rd2.run_time_in_Seconds)%60)end as [Average Run Time HH:MM:SS] from #rawdata2 rd2 innerjoin #rawdata1 rd1on rd1.keyy = rd2.keyygroup by run_date,rd1.run_time ,rd1.run_time_in_Seconds order by run_date desc  

  Read the article

• Notes on Oracle BPM PS6 Adaptive Case Management

  - by gcolman

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} I have recently been looking at the  latest release of the BPM Case Management feature in the Oracle BPM PS6 release. I had put together some notes to help me gain a better understanding of the context of the PS6 BPM Case Management. Hopefully, this along with the other resources will enable you to gain a clear picture of the flexibility of this feature. Oracle BPM PS6 release includes Case Management capability. This initial release aims to provide: Case Management Framework Integration of Case Management with BPM & SOA suite It is best to regard the current PS6 case management feature as a case management framework. The framework provides the building blocks for creating a case management system that is fully integrated into Oracle BPM suite. As of the current PS6 release, no UI tooling exists to help manage cases or the case lifecycle. Mark Foster has written a good blog which outlines Case Management within PS6 in the following link. I wanted to provide more context on Case Management from my perspective in this blog. PS6 Case Management - High level View BPM PS6 includes “Case” as a first class component in a SOA Suite composite. The Case components (added to the SOA Composite) are created when a BPM process is assigned to a case in JDveloper. The SOA Case component is defined and configured within JDevloper, which allows us to specify the case data structures and metadata such as stakeholders, outcomes, milestones, document stores etc. "Activities" are associated with a case, and become available to be executed via the case apis. Activities are BPM processes, Human Activities or Java call outs. The PS6 release includes some additional database tables to store the case metadata and case instance data (data object, comments, etc…). These new tables are created within the SOA_INFRA schema and the documents associated with that case into a document repository that is configured with the case. One of the main features of Case Management is the control of the case logic through case events and case business rules. A PS6 Case has an associated business rule component, which can be configured to control the availability and execution of activities within the case. The business rules component is able to act upon events that the PS6 Case Management framework generates during the lifecycle of that case. Events are fired during the lifetime of the case (e.g. Case created, activity started, activity ended, note added, document uploaded.) Internal Case state The internal state of a case is represented by the diagram below. This shows the internal states and the transition paths for a Case from one state to the next Each transition in state will create an event that can be enacted upon via the Case rules engine. The internal case state lifecycle is defined as follows Defining a case A Case is created and defined as a component of a JDeveloper BPM project. When you create a Case as part of a BPM project, JDeveloper, creates the following components within the SCA composite: Case component Case component interfaces (WSDL etc) Case Rules component (Oracle Business Rules) Adds the Case Component and Case Rules Component to the BPM SOA composite Case Configuration The following section gives a high level overview of the items that can be configured for a BPM Case. Case Activities A Case is associated with a set of activities that are to be performed as part of that Case. Case activities can be: SOA Human Tasks BPM processes Custom Task (Java Class) Case activities are created from pre-existing BPM process or human tasks, which, once defined, can be configured additionally as Case activities in JDeveloper and made available within the lifecycle of a case. I've described the following configurable components of a case (very!) briefly as: Milestones Milestones are (optional) user defined logical milestones that can be achieved within a case. No activities are associates with a milestone, but milestone attainment can be programmatically set and events raised when milestones are reached Outcomes User defined status of a completed case. An event is fired when an outcome is attained. Case Data Defines the data that will be stored with a case XML schemas define the data that is stored with the case. Case Documents Defines the location of documents that are attached to a case (e.g. WebCenter Content) User Defined Events Optional user defined events that can be fired or captured to drive case processing rules Stakeholders Defines the actors who can participate in the case (roles, users, groups) Defines permissions for individual case permissions (read case, create document etc…) Business Rules Business rules are the main component controlling the flow of a Case Each case has an associated business ruleset Rules are fired on receiving Case events (or User defined events) Life cycle events Milestone events Activity events Data events Document events Comment events User event Managing the Case Managing the lifecycle of a case is achieved in two ways: Managing case logic with Business Rules Managing the case lifecycle via the Case APIs. A BPM Case can be viewed as a set of case data & documents along with the activities that can be performed within a case and also the case lifecycle state expressed as milestones and internal lifecycle state. The management of the case life is achieved though both the configuration of business rules and the “manual” interaction with a case instance through the Case APIs. Business Rules and Case Events A key component within the Case management framework is the event model. The BPM Case Management solution internally utilizes Oracle EDN (Event Delivery Network) to publish and subscribe to events generated by the Case framework. Events are generated by the Case framework on each of the processes and stages that a case instance will travel on its lifetime. The following case events are part of the BPM Case: Life cycle events Milestone events Activity events Data events Document events Comment events User event The Case business rules are configured to listen for these events, and business logic can be coded into the Case rules component to enact upon an event being received. Case API & Interaction Along with the business rules component, Cases can be managed via the Case API interfaces. These interfaces allow for the building of custom applications to integrate into case management framework. The API’s allow for updating case comments & documents, executing case activities, updating milestones etc. As there is no in built case management UI functions within the PS6 release, Cases need to be managed via a custom built UI, interacting with selected case instances, launching case activities, closing cases etc. (There is expected to be a UI component within subsequent releases) Logical Case Flow The diagram below is intended to depict a logical view of the case steps for a typical case. A UI or other service calls the Case interface to create a Case instance The case instance is created & database data inserted A lifecycle event is raised indicating a case activity (created) event The case business rules capture the event and decide on an action to take Additionally other parties can subscribe to Case events via EDN The business rules may handle the event, e.g. configured to execute a case activity on case creation event The BPM/Human Workflow/Custom activity is executed A case activity event is raised on the execute activity A case work UI or business service can inspect the case instance and call other actions to progress that case, such as: Execute activity Add Note Add document Add case data Update Milestone Raise user defined event Suspend case Resume case Close Case Summary Having had a little time to play around with the APIs and the case configuration, I really like the flexibility and power of combining Oracle Business Rules and the BPM Case Management event model. Creating something this flexible and powerful without BPM Case Management would take a lot of time and effort. This is hopefully going to save my customers a lot of time and effort! I may make amendments to this post as my understanding of Case Management increases! Take a look at the following links for official documentation etc. http://docs.oracle.com/cd/E28280_01/doc.1111/e15176/case_mgmt_bpmpd.htm https://blogs.oracle.com/bpm/entry/just_in_case Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";}

  Read the article

• Custom Content Pipeline with Automatic Serialization Load Error

  - by Direweasel

  I'm running into this error: Error loading "desert". Cannot find type TiledLib.MapContent, TiledLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null. at Microsoft.Xna.Framework.Content.ContentTypeReaderManager.InstantiateTypeReader(String readerTypeName, ContentReader contentReader, ContentTypeReader& reader) at Microsoft.Xna.Framework.Content.ContentTypeReaderManager.GetTypeReader(String readerTypeName, ContentReader contentReader, List1& newTypeReaders) at Microsoft.Xna.Framework.Content.ContentTypeReaderManager.ReadTypeManifest(Int32 typeCount, ContentReader contentReader) at Microsoft.Xna.Framework.Content.ContentReader.ReadHeader() at Microsoft.Xna.Framework.Content.ContentReader.ReadAsset[T]() at Microsoft.Xna.Framework.Content.ContentManager.ReadAsset[T](String assetName, Action1 recordDisposableObject) at Microsoft.Xna.Framework.Content.ContentManager.Load[T](String assetName) at TiledTest.Game1.LoadContent() in C:\My Documents\Dropbox\Visual Studio Projects\TiledTest\TiledTest\TiledTest\Game1.cs:line 51 at Microsoft.Xna.Framework.Game.Initialize() at TiledTest.Game1.Initialize() in C:\My Documents\Dropbox\Visual Studio Projects\TiledTest\TiledTest\TiledTest\Game1.cs:line 39 at Microsoft.Xna.Framework.Game.RunGame(Boolean useBlockingRun) at Microsoft.Xna.Framework.Game.Run() at TiledTest.Program.Main(String[] args) in C:\My Documents\Dropbox\Visual Studio Projects\TiledTest\TiledTest\TiledTest\Program.cs:line 15 When trying to run the game. This is a basic demo to try and utilize a separate project library called TiledLib. I have four projects overall: TiledLib (C# Class Library) TiledTest (Windows Game) TiledTestContent (Content) TMX CP Ext (Content Pipeline Extension Library) TiledLib contains MapContent which is throwing the error, however I believe this may just be a generic error with a deeper root problem. EMX CP Ext contains one file: MapProcessor.cs using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Content.Pipeline; using Microsoft.Xna.Framework.Content.Pipeline.Graphics; using Microsoft.Xna.Framework.Content.Pipeline.Processors; using Microsoft.Xna.Framework.Content; using TiledLib; namespace TMX_CP_Ext { // Each tile has a texture, source rect, and sprite effects. [ContentSerializerRuntimeType("TiledTest.Tile, TiledTest")] public class DemoMapTileContent { public ExternalReference<Texture2DContent> Texture; public Rectangle SourceRectangle; public SpriteEffects SpriteEffects; } // For each layer, we store the size of the layer and the tiles. [ContentSerializerRuntimeType("TiledTest.Layer, TiledTest")] public class DemoMapLayerContent { public int Width; public int Height; public DemoMapTileContent[] Tiles; } // For the map itself, we just store the size, tile size, and a list of layers. [ContentSerializerRuntimeType("TiledTest.Map, TiledTest")] public class DemoMapContent { public int TileWidth; public int TileHeight; public List<DemoMapLayerContent> Layers = new List<DemoMapLayerContent>(); } [ContentProcessor(DisplayName = "TMX Processor - TiledLib")] public class MapProcessor : ContentProcessor<MapContent, DemoMapContent> { public override DemoMapContent Process(MapContent input, ContentProcessorContext context) { // build the textures TiledHelpers.BuildTileSetTextures(input, context); // generate source rectangles TiledHelpers.GenerateTileSourceRectangles(input); // now build our output, first by just copying over some data DemoMapContent output = new DemoMapContent { TileWidth = input.TileWidth, TileHeight = input.TileHeight }; // iterate all the layers of the input foreach (LayerContent layer in input.Layers) { // we only care about tile layers in our demo TileLayerContent tlc = layer as TileLayerContent; if (tlc != null) { // create the new layer DemoMapLayerContent outLayer = new DemoMapLayerContent { Width = tlc.Width, Height = tlc.Height, }; // we need to build up our tile list now outLayer.Tiles = new DemoMapTileContent[tlc.Data.Length]; for (int i = 0; i < tlc.Data.Length; i++) { // get the ID of the tile uint tileID = tlc.Data[i]; // use that to get the actual index as well as the SpriteEffects int tileIndex; SpriteEffects spriteEffects; TiledHelpers.DecodeTileID(tileID, out tileIndex, out spriteEffects); // figure out which tile set has this tile index in it and grab // the texture reference and source rectangle. ExternalReference<Texture2DContent> textureContent = null; Rectangle sourceRect = new Rectangle(); // iterate all the tile sets foreach (var tileSet in input.TileSets) { // if our tile index is in this set if (tileIndex - tileSet.FirstId < tileSet.Tiles.Count) { // store the texture content and source rectangle textureContent = tileSet.Texture; sourceRect = tileSet.Tiles[(int)(tileIndex - tileSet.FirstId)].Source; // and break out of the foreach loop break; } } // now insert the tile into our output outLayer.Tiles[i] = new DemoMapTileContent { Texture = textureContent, SourceRectangle = sourceRect, SpriteEffects = spriteEffects }; } // add the layer to our output output.Layers.Add(outLayer); } } // return the output object. because we have ContentSerializerRuntimeType attributes on our // objects, we don't need a ContentTypeWriter and can just use the automatic serialization. return output; } } } TiledLib contains a large amount of files including MapContent.cs using System; using System.Collections.Generic; using System.Globalization; using System.Xml; using Microsoft.Xna.Framework.Content.Pipeline; namespace TiledLib { public enum Orientation : byte { Orthogonal, Isometric, } public class MapContent { public string Filename; public string Directory; public string Version = string.Empty; public Orientation Orientation; public int Width; public int Height; public int TileWidth; public int TileHeight; public PropertyCollection Properties = new PropertyCollection(); public List<TileSetContent> TileSets = new List<TileSetContent>(); public List<LayerContent> Layers = new List<LayerContent>(); public MapContent(XmlDocument document, ContentImporterContext context) { XmlNode mapNode = document["map"]; Version = mapNode.Attributes["version"].Value; Orientation = (Orientation)Enum.Parse(typeof(Orientation), mapNode.Attributes["orientation"].Value, true); Width = int.Parse(mapNode.Attributes["width"].Value, CultureInfo.InvariantCulture); Height = int.Parse(mapNode.Attributes["height"].Value, CultureInfo.InvariantCulture); TileWidth = int.Parse(mapNode.Attributes["tilewidth"].Value, CultureInfo.InvariantCulture); TileHeight = int.Parse(mapNode.Attributes["tileheight"].Value, CultureInfo.InvariantCulture); XmlNode propertiesNode = document.SelectSingleNode("map/properties"); if (propertiesNode != null) { Properties = new PropertyCollection(propertiesNode, context); } foreach (XmlNode tileSet in document.SelectNodes("map/tileset")) { if (tileSet.Attributes["source"] != null) { TileSets.Add(new ExternalTileSetContent(tileSet, context)); } else { TileSets.Add(new TileSetContent(tileSet, context)); } } foreach (XmlNode layerNode in document.SelectNodes("map/layer|map/objectgroup")) { LayerContent layerContent; if (layerNode.Name == "layer") { layerContent = new TileLayerContent(layerNode, context); } else if (layerNode.Name == "objectgroup") { layerContent = new MapObjectLayerContent(layerNode, context); } else { throw new Exception("Unknown layer name: " + layerNode.Name); } // Layer names need to be unique for our lookup system, but Tiled // doesn't require unique names. string layerName = layerContent.Name; int duplicateCount = 2; // if a layer already has the same name... if (Layers.Find(l => l.Name == layerName) != null) { // figure out a layer name that does work do { layerName = string.Format("{0}{1}", layerContent.Name, duplicateCount); duplicateCount++; } while (Layers.Find(l => l.Name == layerName) != null); // log a warning for the user to see context.Logger.LogWarning(string.Empty, new ContentIdentity(), "Renaming layer \"{1}\" to \"{2}\" to make a unique name.", layerContent.Type, layerContent.Name, layerName); // save that name layerContent.Name = layerName; } Layers.Add(layerContent); } } } } I'm lost as to why this is failing. Thoughts? -- EDIT -- After playing with it a bit, I would think it has something to do with referencing the projects. I'm already referencing the TiledLib within my main windows project (TiledTest). However, this doesn't seem to make a difference. I can place the dll generated from the TiledLib project into the debug folder of TiledTest, and this causes it to generate a different error: Error loading "desert". Cannot find ContentTypeReader for Microsoft.Xna.Framework.Content.Pipeline.ExternalReference`1[Microsoft.Xna.Framework.Content.Pipeline.Graphics.Texture2DContent]. at Microsoft.Xna.Framework.Content.ContentTypeReaderManager.GetTypeReader(Type targetType, ContentReader contentReader) at Microsoft.Xna.Framework.Content.ContentTypeReaderManager.GetTypeReader(Type targetType) at Microsoft.Xna.Framework.Content.ReflectiveReaderMemberHelper..ctor(ContentTypeReaderManager manager, FieldInfo fieldInfo, PropertyInfo propertyInfo, Type memberType, Boolean canWrite) at Microsoft.Xna.Framework.Content.ReflectiveReaderMemberHelper.TryCreate(ContentTypeReaderManager manager, Type declaringType, FieldInfo fieldInfo) at Microsoft.Xna.Framework.Content.ReflectiveReader1.Initialize(ContentTypeReaderManager manager) at Microsoft.Xna.Framework.Content.ContentTypeReaderManager.ReadTypeManifest(Int32 typeCount, ContentReader contentReader) at Microsoft.Xna.Framework.Content.ContentReader.ReadHeader() at Microsoft.Xna.Framework.Content.ContentReader.ReadAsset[T]() at Microsoft.Xna.Framework.Content.ContentManager.ReadAsset[T](String assetName, Action1 recordDisposableObject) at Microsoft.Xna.Framework.Content.ContentManager.Load[T](String assetName) at TiledTest.Game1.LoadContent() in C:\My Documents\Dropbox\Visual Studio Projects\TiledTest\TiledTest\TiledTest\Game1.cs:line 51 at Microsoft.Xna.Framework.Game.Initialize() at TiledTest.Game1.Initialize() in C:\My Documents\Dropbox\Visual Studio Projects\TiledTest\TiledTest\TiledTest\Game1.cs:line 39 at Microsoft.Xna.Framework.Game.RunGame(Boolean useBlockingRun) at Microsoft.Xna.Framework.Game.Run() at TiledTest.Program.Main(String[] args) in C:\My Documents\Dropbox\Visual Studio Projects\TiledTest\TiledTest\TiledTest\Program.cs:line 15 This is all incredibly frustrating as the demo doesn't appear to have any special linking properties. The TiledLib I am utilizing is from Nick Gravelyn, and can be found here: https://bitbucket.org/nickgravelyn/tiledlib. The demo it comes with works fine, and yet in recreating I always run into this error.

  Read the article

• UndoRedo on Nodes

  - by Geertjan

  When a change is made to the property in the Properties Window, below, the undo/redo functionality becomes enabled: When undo/redo are invoked, e.g., via the buttons in the toolbar, the display name of the node changes accordingly. The only problem I have is that the buttons only become enabled when the Person Window is selected, not when the Properties Window is selected, which would be desirable. Here's the Person object: public class Person implements PropertyChangeListener {     private String name;     public static final String PROP_NAME = "name";     public Person(String name) {         this.name = name;     }     public String getName() {         return name;     }     public void setName(String name) {         String oldName = this.name;         this.name = name;         propertyChangeSupport.firePropertyChange(PROP_NAME, oldName, name);     }     private transient final PropertyChangeSupport propertyChangeSupport = new PropertyChangeSupport(this);     public void addPropertyChangeListener(PropertyChangeListener listener) {         propertyChangeSupport.addPropertyChangeListener(listener);     }     public void removePropertyChangeListener(PropertyChangeListener listener) {         propertyChangeSupport.removePropertyChangeListener(listener);     }     @Override     public void propertyChange(PropertyChangeEvent evt) {         propertyChangeSupport.firePropertyChange(evt);     } } And here's the Node with UndoRedo enablement: public class PersonNode extends AbstractNode implements UndoRedo.Provider, PropertyChangeListener {     private UndoRedo.Manager manager = new UndoRedo.Manager();     private boolean undoRedoEvent;     public PersonNode(Person person) {         super(Children.LEAF, Lookups.singleton(person));         person.addPropertyChangeListener(this);         setDisplayName(person.getName());     }     @Override     protected Sheet createSheet() {         Sheet sheet = Sheet.createDefault();         Sheet.Set set = Sheet.createPropertiesSet();         set.put(new NameProperty(getLookup().lookup(Person.class)));         sheet.put(set);         return sheet;     }     @Override     public void propertyChange(PropertyChangeEvent evt) {         if (evt.getPropertyName().equals(Person.PROP_NAME)) {             firePropertyChange(evt.getPropertyName(), evt.getOldValue(), evt.getNewValue());         }     }     public void fireUndoableEvent(String property, Person source, Object oldValue, Object newValue) {         manager.addEdit(new MyAbstractUndoableEdit(source, oldValue, newValue));     }     @Override     public UndoRedo getUndoRedo() {         return manager;     }     @Override     public String getDisplayName() {         Person p = getLookup().lookup(Person.class);         if (p != null) {             return p.getName();         }         return super.getDisplayName();     }     private class NameProperty extends PropertySupport.ReadWrite<String> {         private Person p;         public NameProperty(Person p) {             super("name", String.class, "Name", "Name of Person");             this.p = p;         }         @Override         public String getValue() throws IllegalAccessException, InvocationTargetException {             return p.getName();         }         @Override         public void setValue(String newValue) throws IllegalAccessException, IllegalArgumentException, InvocationTargetException {             String oldValue = p.getName();             p.setName(newValue);             if (!undoRedoEvent) {                 fireUndoableEvent("name", p, oldValue, newValue);                 fireDisplayNameChange(oldValue, newValue);             }         }     }     class MyAbstractUndoableEdit extends AbstractUndoableEdit {         private final String oldValue;         private final String newValue;         private final Person source;         private MyAbstractUndoableEdit(Person source, Object oldValue, Object newValue) {             this.oldValue = oldValue.toString();             this.newValue = newValue.toString();             this.source = source;         }         @Override         public boolean canRedo() {             return true;         }         @Override         public boolean canUndo() {             return true;         }         @Override         public void undo() throws CannotUndoException {             undoRedoEvent = true;             source.setName(oldValue.toString());             fireDisplayNameChange(oldValue, newValue);             undoRedoEvent = false;         }         @Override         public void redo() throws CannotUndoException {             undoRedoEvent = true;             source.setName(newValue.toString());             fireDisplayNameChange(oldValue, newValue);             undoRedoEvent = false;         }     } } Does anyone out there know how to have the Undo/Redo functionality enabled when the Properties Window is selected?

  Read the article

• Code Reuse is (Damn) Hard

  - by James Michael Hare

  Being a development team lead, the task of interviewing new candidates was part of my job.  Like any typical interview, we started with some easy questions to get them warmed up and help calm their nerves before hitting the hard stuff. One of those easier questions was almost always: “Name some benefits of object-oriented development.”  Nearly every time, the candidate would chime in with a plethora of canned answers which typically included: “it helps ease code reuse.”  Of course, this is a gross oversimplification.  Tools only ease reuse, its developers that ultimately can cause code to be reusable or not, regardless of the language or methodology. But it did get me thinking…  we always used to say that as part of our mantra as to why Object-Oriented Programming was so great.  With polymorphism, inheritance, encapsulation, etc. we in essence set up the concepts to help facilitate reuse as much as possible.  And yes, as a developer now of many years, I unquestionably held that belief for ages before it really struck me how my views on reuse have jaded over the years.  In fact, in many ways Agile rightly eschews reuse as taking a backseat to developing what's needed for the here and now.  It used to be I was in complete opposition to that view, but more and more I've come to see the logic in it.  Too many times I've seen developers (myself included) get lost in design paralysis trying to come up with the perfect abstraction that would stand all time.  Nearly without fail, all of these pieces of code become obsolete in a matter of months or years. It’s not that I don’t like reuse – it’s just that reuse is hard.  In fact, reuse is DAMN hard.  Many times it is just a distraction that eats up architect and developer time, and worse yet can be counter-productive and force wrong decisions.  Now don’t get me wrong, I love the idea of reusable code when it makes sense.  These are in the few cases where you are designing something that is inherently reusable.  The problem is, most business-class code is inherently unfit for reuse! Furthermore, the code that is reusable will often fail to be reused if you don’t have the proper framework in place for effective reuse that includes standardized versioning, building, releasing, and documenting the components.  That should always be standard across the board when promoting reusable code.  All of this is hard, and it should only be done when you have code that is truly reusable or you will be exerting a large amount of development effort for very little bang for your buck. But my goal here is not to get into how to reuse (that is a topic unto itself) but what should be reused.  First, let’s look at an extension method.  There’s many times where I want to kick off a thread to handle a task, then when I want to reign that thread in of course I want to do a Join on it.  But what if I only want to wait a limited amount of time and then Abort?  Well, I could of course write that logic out by hand each time, but it seemed like a great extension method: 1: public static class ThreadExtensions 2: { 3: public static bool JoinOrAbort(this Thread thread, TimeSpan timeToWait) 4: { 5: bool isJoined = false; 6:  7: if (thread != null) 8: { 9: isJoined = thread.Join(timeToWait); 10:  11: if (!isJoined) 12: { 13: thread.Abort(); 14: } 15: } 16: return isJoined; 17: } 18: } 19:  When I look at this code, I can immediately see things that jump out at me as reasons why this code is very reusable.  Some of them are standard OO principles, and some are kind-of home grown litmus tests: Single Responsibility Principle (SRP) – The only reason this extension method need change is if the Thread class itself changes (one responsibility). Stable Dependencies Principle (SDP) – This method only depends on classes that are more stable than it is (System.Threading.Thread), and in itself is very stable, hence other classes may safely depend on it. It is also not dependent on any business domain, and thus isn't subject to changes as the business itself changes. Open-Closed Principle (OCP) – This class is inherently closed to change. Small and Stable Problem Domain – This method only cares about System.Threading.Thread. All-or-None Usage – A user of a reusable class should want the functionality of that class, not parts of that functionality.  That’s not to say they most use every method, but they shouldn’t be using a method just to get half of its result. Cost of Reuse vs. Cost to Recreate – since this class is highly stable and minimally complex, we can offer it up for reuse very cheaply by promoting it as “ready-to-go” and already unit tested (important!) and available through a standard release cycle (very important!). Okay, all seems good there, now lets look at an entity and DAO.  I don’t know about you all, but there have been times I’ve been in organizations that get the grand idea that all DAOs and entities should be standardized and shared.  While this may work for small or static organizations, it’s near ludicrous for anything large or volatile. 1: namespace Shared.Entities 2: { 3: public class Account 4: { 5: public int Id { get; set; } 6:  7: public string Name { get; set; } 8:  9: public Address HomeAddress { get; set; } 10:  11: public int Age { get; set;} 12:  13: public DateTime LastUsed { get; set; } 14:  15: // etc, etc, etc... 16: } 17: } 18:  19: ... 20:  21: namespace Shared.DataAccess 22: { 23: public class AccountDao 24: { 25: public Account FindAccount(int id) 26: { 27: // dao logic to query and return account 28: } 29:  30: ... 31:  32: } 33: } Now to be fair, I’m not saying there doesn’t exist an organization where some entites may be extremely static and unchanging.  But at best such entities and DAOs will be problematic cases of reuse.  Let’s examine those same tests: Single Responsibility Principle (SRP) – The reasons to change for these classes will be strongly dependent on what the definition of the account is which can change over time and may have multiple influences depending on the number of systems an account can cover. Stable Dependencies Principle (SDP) – This method depends on the data model beneath itself which also is largely dependent on the business definition of an account which can be very inherently unstable. Open-Closed Principle (OCP) – This class is not really closed for modification.  Every time the account definition may change, you’d need to modify this class. Small and Stable Problem Domain – The definition of an account is inherently unstable and in fact may be very large.  What if you are designing a system that aggregates account information from several sources? All-or-None Usage – What if your view of the account encompasses data from 3 different sources but you only care about one of those sources or one piece of data?  Should you have to take the hit of looking up all the other data?  On the other hand, should you have ten different methods returning portions of data in chunks people tend to ask for?  Neither is really a great solution. Cost of Reuse vs. Cost to Recreate – DAOs are really trivial to rewrite, and unless your definition of an account is EXTREMELY stable, the cost to promote, support, and release a reusable account entity and DAO are usually far higher than the cost to recreate as needed. It’s no accident that my case for reuse was a utility class and my case for non-reuse was an entity/DAO.  In general, the smaller and more stable an abstraction is, the higher its level of reuse.  When I became the lead of the Shared Components Committee at my workplace, one of the original goals we looked at satisfying was to find (or create), version, release, and promote a shared library of common utility classes, frameworks, and data access objects.  Now, of course, many of you will point to nHibernate and Entity for the latter, but we were looking at larger, macro collections of data that span multiple data sources of varying types (databases, web services, etc). As we got deeper and deeper in the details of how to manage and release these items, it quickly became apparent that while the case for reuse was typically a slam dunk for utilities and frameworks, the data access objects just didn’t “smell” right.  We ended up having session after session of design meetings to try and find the right way to share these data access components. When someone asked me why it was taking so long to iron out the shared entities, my response was quite simple, “Reuse is hard...”  And that’s when I realized, that while reuse is an awesome goal and we should strive to make code maintainable, often times you end up creating far more work for yourself than necessary by trying to force code to be reusable that inherently isn’t. Think about classes the times you’ve worked in a company where in the design session people fight over the best way to implement a class to make it maximally reusable, extensible, and any other buzzwordable.  Then think about how quickly that design became obsolete.  Many times I set out to do a project and think, “yes, this is the best design, I can extend it easily!” only to find out the business requirements change COMPLETELY in such a way that the design is rendered invalid.  Code, in general, tends to rust and age over time.  As such, writing reusable code can often be difficult and many times ends up being a futile exercise and worse yet, sometimes makes the code harder to maintain because it obfuscates the design in the name of extensibility or reusability. So what do I think are reusable components? Generic Utility classes – these tend to be small classes that assist in a task and have no business context whatsoever. Implementation Abstraction Frameworks – home-grown frameworks that try to isolate changes to third party products you may be depending on (like writing a messaging abstraction layer for publishing/subscribing that is independent of whether you use JMS, MSMQ, etc). Simplification and Uniformity Frameworks – To some extent this is similar to an abstraction framework, but there may be one chosen provider but a development shop mandate to perform certain complex items in a certain way.  Or, perhaps to simplify and dumb-down a complex task for the average developer (such as implementing a particular development-shop’s method of encryption). And what are less reusable? Application and Business Layers – tend to fluctuate a lot as requirements change and new features are added, so tend to be an unstable dependency.  May be reused across applications but also very volatile. Entities and Data Access Layers – these tend to be tuned to the scope of the application, so reusing them can be hard unless the abstract is very stable. So what’s the big lesson?  Reuse is hard.  In fact it’s damn hard.  And much of the time I’m not convinced we should focus too hard on it. If you’re designing a utility or framework, then by all means design it for reuse.  But you most also really set down a good versioning, release, and documentation process to maximize your chances.  For anything else, design it to be maintainable and extendable, but don’t waste the effort on reusability for something that most likely will be obsolete in a year or two anyway.

  Read the article

• C#/.NET Little Wonders: The Nullable static class

  - by James Michael Hare

  Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. Today we’re going to look at an interesting Little Wonder that can be used to mitigate what could be considered a Little Pitfall.  The Little Wonder we’ll be examining is the System.Nullable static class.  No, not the System.Nullable<T> class, but a static helper class that has one useful method in particular that we will examine… but first, let’s look at the Little Pitfall that makes this wonder so useful. Little Pitfall: Comparing nullable value types using <, >, <=, >= Examine this piece of code, without examining it too deeply, what’s your gut reaction as to the result? 1: int? x = null; 2:  3: if (x < 100) 4: { 5: Console.WriteLine("True, {0} is less than 100.", 6: x.HasValue ? x.ToString() : "null"); 7: } 8: else 9: { 10: Console.WriteLine("False, {0} is NOT less than 100.", 11: x.HasValue ? x.ToString() : "null"); 12: } Your gut would be to say true right?  It would seem to make sense that a null integer is less than the integer constant 100.  But the result is actually false!  The null value is not less than 100 according to the less-than operator. It looks even more outrageous when you consider this also evaluates to false: 1: int? x = null; 2:  3: if (x < int.MaxValue) 4: { 5: // ... 6: } So, are we saying that null is less than every valid int value?  If that were true, null should be less than int.MinValue, right?  Well… no: 1: int? x = null; 2:  3: // um... hold on here, x is NOT less than min value? 4: if (x < int.MinValue) 5: { 6: // ... 7: } So what’s going on here?  If we use greater than instead of less than, we see the same little dilemma: 1: int? x = null; 2:  3: // once again, null is not greater than anything either... 4: if (x > int.MinValue) 5: { 6: // ... 7: } It turns out that four of the comparison operators (<, <=, >, >=) are designed to return false anytime at least one of the arguments is null when comparing System.Nullable wrapped types that expose the comparison operators (short, int, float, double, DateTime, TimeSpan, etc.).  What’s even odder is that even though the two equality operators (== and !=) work correctly, >= and <= have the same issue as < and > and return false if both System.Nullable wrapped operator comparable types are null! 1: DateTime? x = null; 2: DateTime? y = null; 3:  4: if (x <= y) 5: { 6: Console.WriteLine("You'd think this is true, since both are null, but it's not."); 7: } 8: else 9: { 10: Console.WriteLine("It's false because <=, <, >, >= don't work on null."); 11: } To make matters even more confusing, take for example your usual check to see if something is less than, greater to, or equal: 1: int? x = null; 2: int? y = 100; 3:  4: if (x < y) 5: { 6: Console.WriteLine("X is less than Y"); 7: } 8: else if (x > y) 9: { 10: Console.WriteLine("X is greater than Y"); 11: } 12: else 13: { 14: // We fall into the "equals" assumption, but clearly null != 100! 15: Console.WriteLine("X is equal to Y"); 16: } Yes, this code outputs “X is equal to Y” because both the less-than and greater-than operators return false when a Nullable wrapped operator comparable type is null.  This violates a lot of our assumptions because we assume is something is not less than something, and it’s not greater than something, it must be equal.  So keep in mind, that the only two comparison operators that work on Nullable wrapped types where at least one is null are the equals (==) and not equals (!=) operators: 1: int? x = null; 2: int? y = 100; 3:  4: if (x == y) 5: { 6: Console.WriteLine("False, x is null, y is not."); 7: } 8:  9: if (x != y) 10: { 11: Console.WriteLine("True, x is null, y is not."); 12: } Solution: The Nullable static class So we’ve seen that <, <=, >, and >= have some interesting and perhaps unexpected behaviors that can trip up a novice developer who isn’t expecting the kinks that System.Nullable<T> types with comparison operators can throw.  How can we easily mitigate this? Well, obviously, you could do null checks before each check, but that starts to get ugly: 1: if (x.HasValue) 2: { 3: if (y.HasValue) 4: { 5: if (x < y) 6: { 7: Console.WriteLine("x < y"); 8: } 9: else if (x > y) 10: { 11: Console.WriteLine("x > y"); 12: } 13: else 14: { 15: Console.WriteLine("x == y"); 16: } 17: } 18: else 19: { 20: Console.WriteLine("x > y because y is null and x isn't"); 21: } 22: } 23: else if (y.HasValue) 24: { 25: Console.WriteLine("x < y because x is null and y isn't"); 26: } 27: else 28: { 29: Console.WriteLine("x == y because both are null"); 30: } Yes, we could probably simplify this logic a bit, but it’s still horrendous!  So what do we do if we want to consider null less than everything and be able to properly compare Nullable<T> wrapped value types? The key is the System.Nullable static class.  This class is a companion class to the System.Nullable<T> class and allows you to use a few helper methods for Nullable<T> wrapped types, including a static Compare<T>() method of the. What’s so big about the static Compare<T>() method?  It implements an IComparer compatible comparison on Nullable<T> types.  Why do we care?  Well, if you look at the MSDN description for how IComparer works, you’ll read: Comparing null with any type is allowed and does not generate an exception when using IComparable. When sorting, null is considered to be less than any other object. This is what we probably want!  We want null to be less than everything!  So now we can change our logic to use the Nullable.Compare<T>() static method: 1: int? x = null; 2: int? y = 100; 3:  4: if (Nullable.Compare(x, y) < 0) 5: { 6: // Yes! x is null, y is not, so x is less than y according to Compare(). 7: Console.WriteLine("x < y"); 8: } 9: else if (Nullable.Compare(x, y) > 0) 10: { 11: Console.WriteLine("x > y"); 12: } 13: else 14: { 15: Console.WriteLine("x == y"); 16: } Summary So, when doing math comparisons between two numeric values where one of them may be a null Nullable<T>, consider using the System.Nullable.Compare<T>() method instead of the comparison operators.  It will treat null less than any value, and will avoid logic consistency problems when relying on < returning false to indicate >= is true and so on. Tweet   Technorati Tags: C#,C-Sharp,.NET,Little Wonders,Little Pitfalls,Nulalble

  Read the article

• Using the OAM Mobile & Social SDK to secure native mobile apps - Part 2 : OAM Mobile & Social Server configuration

  - by kanishkmahajan

  Objective  In the second part of this blog post I'll now cover configuration of OAM to secure our sample native apps developed using the iOS SDK. First, here are some key server side concepts: Application Profiles: An application profile is a logical representation of your application within OAM server. It could be a web (html/javascript) or native (iOS or Android) application. Applications may have different requirements for AuthN/AuthZ, and therefore each application that interacts with OAM Mobile & Social REST services must be uniquely defined. Service Providers: Service providers represent the back end services that are accessed by applications. With OAM Mobile & Social these services are in the areas of authentication, authorization and user profile access. A Service Provider then defines a type or class of service for authentication, authorization or user profiles. For example, the JWTAuthentication provider performs authentication and returns JWT (JSON Web Tokens) to the application. In contrast, the OAMAuthentication also provides authentication but uses OAM SSO tokens Service Profiles:  A Service Profile is a logical envelope that defines a service endpoint URL for a service provider for the OAM Mobile & Social Service. You can create multiple service profiles for a service provider to define token capabilities and service endpoints. Each service provider instance requires atleast one corresponding service profile.The  OAM Mobile & Social Service includes a pre-configured service profile for each pre-configured service provider. Service Domains: Service domains bind together application profiles and service profiles with an optional security handler. So now let's configure the OAM server. Additional details are in the OAM Documentation and this post simply provides an outline of configuration tasks required to configure OAM for securing native apps.  Configuration  Create The Application Profile Log on to the Oracle Access Management console and from System Configuration -> Mobile and Social -> Mobile Services, select "Create" under Application Profiles. You would do this  step twice - once for each of the native apps - AvitekInventory and AvitekScheduler. Enter the parameters for the new Application profile: Name:  The application name. In this example we use 'InventoryApp' for the AvitekInventory app and 'SchedulerApp' for the AvitekScheduler app. The application name configured here must match the application name in the settings for the deployed iOS application. BaseSecret: Enter a password here. This does not need to match any existing password. It is used as an encryption key between the client and the OAM server.  Mobile Configuration: Enable this checkbox for any mobile applications. This enables the SDK to collect and send Mobile specific attributes to the OAM server.  Webview: Controls the type of browser that the iOS application will use. The embedded browser (default) will render the browser within the application. External will use the system standalone browser. External can sometimes be preferable for debugging URLScheme: The URL scheme associated with the iOS apps that is also used as a custom URL scheme to register O/S handlers that will take control when OAM transfers control to device. For the AvitekInventory and the AvitekScheduler apps I used osa:// and client:// respectively. You set this scheme in Xcode while developing your iOS Apps under Info->URL Types.  Bundle Identifier : The fully qualified name of your iOS application. You typically set this when you create a new Xcode project or under General->Identity in Xcode. For the AvitekInventory and AvitekScheduler apps these were com.us.oracle.AvitekInventory and com.us.oracle.AvitekScheduler respectively.  Create The Service Domain Select create under Service domains. Create a name for your domain (AvitekDomain is what I've used). The name configured must match the service domain set in the iOS application settings. Under "Application Profile Selection" click the browse button. Choose the application profiles that you created in the previous step one by one. Set the InventoryApp as the SSO agent (with an automatic priority of 1) and the SchedulerApp as the SSO client. This associates these applications with this service domain and configures them in a 'circle of trust'.  Advance to the next page of the wizard to configure the services for this domain. For this example we will use the following services:  Authentication:   This will use the JWT (JSON Web Token) format authentication provider. The iOS application upon successful authentication will receive a signed JWT token from OAM Mobile & Social service. This token will be used in subsequent calls to OAM. Use 'MobileOAMAuthentication' here. Authorization:  The authorization provider. The SDK makes calls to this provider endpoint to obtain authorization decisions on resource requests. Use 'OAMAuthorization' here. User Profile Service:  This is the service that provides user profile services (attribute lookup, attribute modification). It can be any directory configured as a data source in OAM.  And that's it! We're done configuring our native apps. In the next section, let's look at some additional features that were mentioned in the earlier post that are automated by the SDK for the app developer i.e. these are areas that require no additional coding by the app developer when developing with the SDK as they only require server side configuration: Additional Configuration  Offline Authentication Select this option in the service domain configuration to allow users to log in and authenticate to the application locally. Clear the box to block users from authenticating locally. Strong Authentication By simply selecting the OAAMSecurityHandlerPlugin while configuring mobile related Service Domains, the OAM Mobile&Social service allows sophisticated device and client application registration logic as well as the advanced risk and fraud analysis logic found in OAAM to be applied to mobile authentication. Let's look at some scenarios where the OAAMSecurityHandlerPlugin gets used. First, when we configure OAM and OAAM to integrate together using the TAP scheme, then that integration kicks off by selecting the OAAMSecurityHandlerPlugin in the mobile service domain. This is how the mobile device is now prompted for KBA,OTP etc depending on the TAP scheme integration and the OAM users registered in the OAAM database. Second, when we configured the service domain, there were claim attributes there that are already pre-configured in OAM Mobile&Social service and we simply accepted the default values- these are the set of attributes that will be fetched from the device and passed to the server during registration/authentication as device profile attributes. When a mobile application requests a token through the Mobile Client SDK, the SDK logic will send the Device Profile attributes as a part of an HTTP request. This set of Device Profile attributes enhances security by creating an audit trail for devices that assists device identification. When the OAAM Security Plug-in is used, a particular combination of Device Profile attribute values is treated as a device finger print, known as the Digital Finger Print in the OAAM Administration Console. Each finger print is assigned a unique fingerprint number. Each OAAM session is associated with a finger print and the finger print makes it possible to log (and audit) the devices that are performing authentication and token acquisition. Finally, if the jail broken option is selected while configuring an application profile, the SDK detects a device is jail broken based on configured policy and if the OAAM handler is configured the plug-in can allow or block access to client device depending on the OAAM policy as well as detect blacklisted, lost or stolen devices and send a wipeout command that deletes all the mobile &social relevant data and blocks the device from future access. 1024x768 Social Logins Finally, let's complete this post by adding configuration to configure social logins for mobile applications. Although the Avitek sample apps do not demonstrate social logins this would be an ideal exercise for you based on the sample code provided in the earlier post. I'll cover the server side configuration here (with Facebook as an example) and you can retrofit the code to accommodate social logins by following the steps outlined in "Invoking Authentication Services" and add code in LoginViewController and maybe create a new delegate - AvitekRPDelegate based on the description in the previous post. So, here all you will need to do is configure an application profile for social login, configure a new service domain that uses the social login application profile, register the app on Facebook and finally configure the Facebook OAuth provider in OAM with those settings. Navigate to Mobile and Social, click on "Internet Identity Services" and create a new application profile. Here are the relevant parameters for the new application profile (-also we're not registering the social user in OAM with this configuration below, however that is a key feature as well): Name:  The application name. This must match the name of the of mobile application profile created for your application under Mobile Services. We used InventoryApp for this example. SharedSecret: Enter a password here. This does not need to match any existing password. It is used as an encryption key between the client and the OAM Mobile and Social service.  Mobile Application Return URL: After the Relying Party (social) login, the OAM Mobile & Social service will redirect to the iOS application using this URI. This is defined under Info->URL type and we used 'osa', so we define this here as 'osa://' Login Type: Choose to allow only internet identity authentication for this exercise. Authentication Service Endpoint : Make sure that /internetidentityauthentication is selected. Login to http://developers.facebook.com using your Facebook account and click on Apps and register the app as InventoryApp. Note that the consumer key and API secret gets generated automatically by the Facebook OAuth server. Navigate back to OAM and under Mobile and Social, click on "Internet Identity Services" and edit the Facebook OAuth Provider. Add the consumer key and API secret from the Facebook developers site to the Facebook OAuth Provider: Navigate to Mobile Services. Click on New to create a new service domain. In this example we call the domain "AvitekDomainRP". The type should be 'Mobile Application' and the application credential type 'User Token'. Add the application "InventoryApp" to the domain. Advance the next page of the wizard. Select the  default service profiles but ensure that the Authentication Service is set to 'InternetIdentityAuthentication'. Finish the creation of the service domain.

  Read the article

• CodePlex Daily Summary for Thursday, November 03, 2011

  CodePlex Daily Summary for Thursday, November 03, 2011Popular ReleasesFlagConsole: 1.0.1: BUGFIXES: - Fixed a bug, which caused the label not to draw a word, if it had the same length as the label's length.Nearforums - ASP.NET MVC forum engine: Nearforums v7.0: Version 7.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: UI: Flexible layout to handle both list and table-like template layouts. Theming - Visual choice of themes: Deliver some templates on installation, export/import functionality, preview. Allow site owners to choose default list sort order for the forums. Forum latest activity. Visit the project Roadmap for more details.?????????? - ????????: All-In-One Code Framework ??? 2011-11-02: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ??????，11??，?????20????Microsoft OneCode Sample，????6?Program Language Sample，2?Windows Base Sample，2?GDI+ Sample，4?Internet Explorer Sample?6?ASP.NET Sample。?????????????。 ????，?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 Program Language CSImageFullScreenSlideShow VBImageFullScreenSlideShow CSDynamicallyBuildLambdaExpressionWithFie...Python Tools for Visual Studio: 1.1 Alpha: We’re pleased to announce the release of Python Tools for Visual Studio 1.1 Alpha. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python programming language. This release includes new core IDE features, a couple of new sample libraries for interacting with Kinect and Excel, and many bug fixes for issues reported since the release of 1.0. For the core IDE features we’ve added many new features which improve the basic edit...BExplorer (Better Explorer): Better Explorer 2.0.0.631 Alpha: Changelog: Added: Some new functions in ribbon Added: Possibility to choose displayed columns Added: Basic Search Fixed: Some bugs after navigation Fixed: Attempt to fix slow navigation and slow start Known issues: - BreadcrumbBar fails on some situations - Basic search not work quite well in some situations Please if anyone find bugs be kind and report them at the Issue Tracker! Thanks!DotNetNuke® Community Edition: 05.06.04: Major Highlights Fixed issue with upgrades on systems that had upgraded the Telerik library to 6.0.0 Fixed issue with Razor Host upgrade to 5.6.3 The logic for module administration checks contains incorrect logic in 1 place, opening the possibility of a user with edit permissions gaining access to functionality they should not have through a particularly crafted url Security FixesBrowsers support the ability to remember common strings such as usernames/addresses etc. Code was adde...Terminals: Version 2.0 - Beta 2 Release: The team has finally put the nail into the official release date for version 2.0. As bugs are winding down on the 2.0 Roadmap we decided to push out another build - the first 2.0 Beta build. Please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Check the source code page on the site, this beta includes all commits since (and including) the 90428 check-in back i...iTuner - The iTunes Companion: iTuner 1.4.4322: Added German (unverified, apologies if incorrect) Properly source invariant resources with correct resIDs Replaced obsolete lyric providers with working providers Fix Pseudolater to correctly morph every third char Fix null reference in CatalogBaseTrack Folder Changes: Track Folder Changes 1.0: Track Folder Changes 1.0 (binary)Devpad: 4.6: Whats new for Devpad 4.6: New Recent Files New Run in Safari Minor Bug Fix's, improvements and speed upsWindows Workflow Foundation on Codeplex: Microsoft.Activities v1.8.8: Microsoft.Activities Overview How do I install Microsoft.Activities? Updates in this release9318Technical Analysis Engine for .NET: Technical Analysis Engine 1.25: What's new in the 1.25 release (2011-11-01): - Added Williams %R indicator - Added Moving Average Envelopes indicatorBoxWorld: BoxWorld_2011.10.30: BoxWorld - 8.0.1110.30 This is the initial release of BoxWorld. I'd recommend downloading the installer as it contains the compiled code and everything all nicely contained. By default, you end up with this directory structure: C:\Program Files\ViperWorks\BoxWorld C:\Program Files\ViperWorks\BoxWorld\Data C:\Program Files\ViperWorks\BoxWorld\Interface C:\Program Files\ViperWorks\BoxWorld\Source In the root you have the compiled EXE files, one for the main release, one for the LITE release ...VidCoder: 1.2.1: Fixed a couple regressions: video encoder was blank in queue and crashes with the High Profile preset when opening the Settings window. Fixed problem with auto-update introduced in 1.2.0. If you have 1.2.0 you will need to update manually to get this.AssaultCube Reloaded: Release 2.3: THE RELEASE YOU'VE ALL BEEN WAITING FOR! IT CAN NOW BE CONSIDERED STABLE Linux has Debian 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, download the Linux package. The server pack is ready for both Windows and Linux, but you might need to compile your own for linux (source included) If you are using Windows and require the source code, download the source package!A Microblog API (SINA weibo.com open API in C#, .Net???????API): AMicroblogAPI v1.0: AMicroBlogAPI is a C# implementation, a strong-typed deep encapsulation, a easy-to-use .net wrapper of SINA microblog API v1.0. App developers no longer need to parse various HTTP responses -- all responses are parsed into strong types; No longer need to construt the request query strings -- just simply gives the values of parameters; No longer need to implement the OAuth -- a single call could logs the user on. In this release (AMicroblogAPI v1.0), all basic data APIs are implemented. For ...patterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...Duckworth Lewis Professional Edition Calculator: DLcalc 3.0: DLcalc 3.0 can perform Duckworth/Lewis Professional Edition calculations 100% accurately. It also produces over-by-over and ball-by-ball PAR score tables.Media Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...New ProjectsASP.NET MVC fluent validation framework: FluentMvc allow you to create validatable models without using any validation attributes.BeanPermutator: The BeanPermutator library provides a robust permutations engine. It was designed with framework API, optimal performance, and memory usage in mind. For performance, the implementation is modeled after STL's next_permutation; except with added support for conditional result sets.Cicero: Cicero is a library/application to programmatically analyze managed crash dumps. It provides a managed API to load dumps and look at managed objects, using [url:SOS|http://msdn.microsoft.com/en-us/library/bb190764.aspx] under the covers.CodePlex Windows Phone App: This project deals with how to browse efficently through codeplex website using windows phone capabilities.Collage: A photo collage screensaver.Docs Professional Archiving System: This application basically provides a professional audit compliant archiving system with storage service.EBSCOLunch: This app simply shows ebsco's lunch menu. It runs in the system tray and when clicked on shows today's cafeteria specials.Emesary: C# Interobject communication and application mssaging: Simple quick and efficient class based interobject communcation to allow decoupled disparate parts of a system to function together without knowing about each, e.g GUI, DB and business logic.Enterprise Data Entry, Reporting and Analysis Tool: This project will have app with different modules that will show the interface tools functions based on the designation of an employee as defined in Active Directory. Example: A team manager can view all the details regarding his immediate subordinates. Financial date and time libary: Date and time routines that know about holidays, rolling conventions, and day count fractions.Frame Work Model by Patán: Proyecto de modelado de FrameworkIttxa: Is in Alpha releaseKooboo CMS data sync module: Kooboo cms data export / import module.MetroBlog: A Windows 8 Metro inspired blog. Mosque: In the name of GOD this is a portalMPO tools: A .net library for parsing .mpo stereo images (in Multi-Picture Format).mytest5: my testtttttttttNetflix MVP Example: Example .NET movie application using the MVP pattern with windows forms and WPF. Uses the Netflix Odata service to get movie information.OpenStreetMap2Oracle: OpenStreetMap2Oracle is a windows application, which exports OpenStreetMap Data (*.osm - files) in an oracle database. The geometries will be stored in oracle's SDO_GEOMETRY datatype. It is developed in C Sharp with modern WPF - UI. PSRR - Remote Registry PowerShell 3.0 Module: Remote Registry PowerShell Module to manage the registry with Windows PowerShell. This version supports the new improvement in .NET 4 to specify a 32-bit or 64-bit view of the registry with the Microsoft.Win32.RegistryView enumeration when you open base keys.Raptor-Plus-Plus: CS240 class project Reset IPv6: Troubleshooting Pack to reset virtual IPv6 interfaces on Windows 7 (ISATAP, Teredo, IPHTTPS and 6to4)resurection: Game for WP7SharePoint 2010 Google Maps Web Part for Sandbox and Farm Solutions: The Google Maps Web Part lets you quickly and easily add Google Maps to your Microsoft SharePoint 2010 pages. Compatible with SharePoint 2010, SharePoint 2010 SP1 and SharePoint Online, via Office 365.SPLight UTL Sharepoint 2010 BackUp / Restore UI: Sharepoint 2010 BackUp / Restore UI Sharepoint 2010 backUp restore user interface site collection backup restore graphical user interfaceVisual Image Processing: Visual Image processing for 2d or 3d real-time video or still image from camera or web cam or scanner ... XNA4LED: XNA 4.0 LED Billboard Example

  Read the article

• CodePlex Daily Summary for Monday, May 28, 2012

  CodePlex Daily Summary for Monday, May 28, 2012Popular ReleasesScreenShot: InstallScreenShot: This is the current stable release..Net Code Samples: Code Samples: Code samples (SLNs).LINQ_Koans: LinqKoans v.02: Cleaned up a bitKeelKit: KeelKit 3.0.7600.638: ?、??MySQL?Model?? Mysql ????? ? http://dev.mysql.com/downloads/connector/net/ ??? mysql-connector-net-6.5.4.msi ???， VS???KeelKit ???????MySQL , ????????? ?? DemoMySQL.rar ???， ???????????MySqL??Model. ?????? C:\Windows\Microsoft.NET\Framework\v4.0.30319\Config\machine.config ??? ??????。 <system.data> <DbProviderFactories> <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlC...TwitterOAuth: TwitterOauth 0.25.16.0116: Beta releasetesttom05242012git02: d1: d1testdd05242012git001: zxczxc: zxczxczxcCODE Framework: 4.0.20524.0: This release has quite a few enhancements for WPF applications and SOA features. See change logs for more details.CommonLibrary.NET: CommonLibrary.NET 0.9.8 - Final Release: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. FluentscriptCommonLibrary.NET 0.9.8 contains a scripting language called FluentScript. Application: FluentScript Version: 0.9.8 Build: 0.9.8.4 Changeset: 75050 ( CommonLibrary.NET ) Release date: May 24, 2012 Binaries: CommonLibrary.dll Namespace: ComLib.Lang Project site: http://fluentscript.codeplex.com...System Center Orchestrator Integration Packs: Active Directory 3.2: An integration pack enabling AD Automation 3.2 Updates LDAP Pathing updated to support cross forest scenarios Get Object Property Value Filtering efficiency enhancementsBunch of Small Tools: Mélangeur de vocabulaire japonais: Permet de générer des exercices de vocabulaire aléatoire à partir de listes de vocabulaire japonais. 22 listes sont fournies avec le programme.Expression Tree Visualizer for VS 2010: Expression Tree Visualizer Beta: This is a beta release, in this release some expression types are not handled and use a default visualization behavior. The first release will be published soon. Wait for it...Ulfi: Ulfi source: Build with Visual Studio 2010 Express C# or betterJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0 RC1 Refresh 2: JayData is a unified data access library for JavaScript developers to query and update data from different sources like webSQL, indexedDB, OData, Facebook or YQL. See it in action in this 6 minutes video: http://www.youtube.com/watch?v=LlJHgj1y0CU RC1 R2 Release highlights Knockout.js integrationUsing the Knockout.js module, your UI can be automatically refreshed when the data model changes, so you can develop the front-end of your data manager app even faster. Querying 1:N relations in W...Christoc's DotNetNuke Module Development Template: 00.00.08 for DNN6: BEFORE USE YOU need to install the MSBuild Community Tasks available from http://msbuildtasks.tigris.org For best results you should configure your development environment as described in this blog post Then read this latest blog post about customizing and using these custom templates. Installation is simple To use this template place the ZIP (not extracted) file in your My Documents\Visual Studio 2010\Templates\ProjectTemplates\Visual C#\Web OR for VB My Documents\Visual Studio 2010\Te...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.53: fix issue #18106, where member operators on numeric literals caused the member part to be duplicated when not minifying numeric literals ADD NEW FEATURE: ability to create source map files! The first mapfile format to be supported is the Script# format. Use the new -map filename switch to create map files when building your sources.CreditAnalytics: CreditAnalytics Release 1.5: 22 May 2012 (v1.5) (Build 449) Regressor Framework: Implementation of the regressor set, tolerance check, curve scenario regressors, regression framework suite, and the eventual regression output. Discount Curve Regression: Regressing Base Curve Creation, scenario Curve creation, and calculation of spot/effective implied rates and discount factors. Credit Curve Regression: Regressing Base Curve Creation, scenario Curve creation, and calculation of spot/effective implied hazard rates, reco...BlackJumboDog: Ver5.6.3: 2012.05.22 Ver5.6.3 　(1) HTTP????????、ftp://??????????????????????LogicCircuit: LogicCircuit 2.12.5.22: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionThis release is fixing start up issue.Orchard Project: Orchard 1.4.2: This is a service release to address 1.4 and 1.4.1 bugs. Please read our release notes for Orchard 1.4.2: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-NotesNew Projects.Net Code Samples: Various .Net code samples. AFSAspnetPusherV1: my new wns project lolAFSAspnetPusherV2: renewed version ofAFSAspnetPusherV4: renewed one v4AgileDesign Utilities Library: This library provides common functionality usable for most software projects: Logger - Asynchronous logging on top of new Microsoft logging class TraceSource with simplified API NameOf - Avoid using string names using static reflection Various reflection helpersAssociate Many to Many Relationship Entities Tool for Dynamics CRM 2011: Associate Many to many relationship tool is used for Dynamics CRM 2011 to associate or disassociate N:N relationship entities. This tool is dynamics crm 2011 solution, which consist of one entity and one plugin. Entity "Many to Many Relationship" record is used by Many to many relationship plugin to associate or disassociate entities. If many to many relationship entity record is created then plugin associate/disassociate entities from record data.Boxhead Multiplayer Server: A PHP dedicated server for my multiplayer version of Boxhead.CodedUITraceFiletoCSV: Console Application to parse the result file generated by Coded UI Test execution ".trx" into a comma separated file for more readable and detailed result.FlipExt: FlipExt is an easy to use image converter. It converts any image to .png .bmp .jpg .gif .tif .jpeg .tiff .ico. More extensions will be added soon.Foo Values Maker: Foo creates values for your test class variables so that you can write tests faster.FoodFree: Projeto de monitoramento de enchentesHouodeProject: ????ITLand of Dreams, Codename: Waterloo: We want to create a classical Live-MMORPG you can play on your smartphone (in the first step only “Windows Phone” will be supported) with the basic idea of Ultima Online or similiar games in our mind. You can create one or more characters, choose some name, gender, basic attributes (skin and hair color, …) a race (e.g. ‘Human’) and a profession (e.g. ‘fighter’ or ‘craftsman’). Now he can freely travel through the whole world, meeting other players, fighting monsters, absolving quests, tra...Makecert UI: Makecert UI is a shell layer application on top of the Microsoft makecert.exe utility. Makecert UI makes it easy for you to create self signed certificates, even from your own CA.MS CRM Rich Text box: Rich text box plug-in for MS CRM 2011. Hope it will be helpful for many of you. Thank you for using it and let me know if any further help needed.Nivo Slider Web Part SharePoint 2010: SharePoint 2010 implementation of Nivo Slider. Easy way to put Nivo slider on any page!!Office365 Weather WebPart: Office 365 WebPart that displays a 5 day weather forecast for a given location. The weather data is retrieved from the Met Office feed hosted on the Windows Azure Data Market. This is a free data feed that provides weather data for the UK only.Private Cloud Solution Design: This project is named “Training Cloud”. It provides an appropriate solution which can be used for technical audiences self learning with a hands-on-lab experience using Microsoft technology hosted in a virtualized environment built on System Center 2012. Since it depends on hardware, such as RAM, Sotrage, Network , etc. At last, the end user could have all labs ready which deloyed on private cloud. And it can be easily matain , setup labs with cloud’s function. pyUpdater: pyupdater provides a platform for updating python based applications.SharePoint Document Navigator: SP Document Navigator is a front-end solution for navigating a document library using jQuery and jQuery Mobile Trimetable: Train schedule for WP7Upload Master Pages & Page Layouts to Master Page Gallery using PowerShell: This document details the steps to upload Master pages and Page Layouts to Master Page Gallery using the “Upload Master Pages” Utility. 1- Download the .zip file 2- Edit the “UploadMasterPages.bat” file and Change the <<site collection url>> in the text below with respect to the environment. e.g. http://sitecollectionurl 3- Save the “UploadMasterPages.bat” file and close it. 4- Put all of your master pages and page layouts to Doc folder. 5- Run “UploadMasterPages.bat” file as Administrat...vivo: vivo Vietnamese Voice Vietnamese Voice recognition project thaihung.bkhn@gmail.com http://eking.vnvnv: VNV Vietnamese Voice Vietnamese Voice recognition project thaihung.bkhn@gmail.com http://eking.vnWindows Phone 7 User Guide Page: Take your app's users through a guided tour! Make your app's hidden gems shine, make users understand your app's logic and UX better.WP-FTS: This plugin for Wordpress replaces the default search engine, implemented using a simple "LIKE" operator, with the usage of the more powerful Full-Text Engine that comes with SQL Server.

  Read the article

• Key ATG architecture principles

  - by Glen Borkowski

  Overview The purpose of this article is to describe some of the important foundational concepts of ATG.  This is not intended to cover all areas of the ATG platform, just the most important subset - the ones that allow ATG to be extremely flexible, configurable, high performance, etc.  For more information on these topics, please see the online product manuals. Modules The first concept is called the 'ATG Module'.  Simply put, you can think of modules as the building blocks for ATG applications.  The ATG development team builds the out of the box product using modules (these are the 'out of the box' modules).  Then, when a customer is implementing their site, they build their own modules that sit 'on top' of the out of the box ATG modules.  Modules can be very simple - containing minimal definition, and perhaps a small amount of configuration.  Alternatively, a module can be rather complex - containing custom logic, database schema definitions, configuration, one or more web applications, etc.  Modules generally will have dependencies on other modules (the modules beneath it).  For example, the Commerce Reference Store module (CRS) requires the DCS (out of the box commerce) module. Modules have a ton of value because they provide a way to decouple a customers implementation from the out of the box ATG modules.  This allows for a much easier job when it comes time to upgrade the ATG platform.  Modules are also a very useful way to group functionality into a single package which can be leveraged across multiple ATG applications. One very important thing to understand about modules, or more accurately, ATG as a whole, is that when you start ATG, you tell it what module(s) you want to start.  One of the first things ATG does is to look through all the modules you specified, and for each one, determine a list of modules that are also required to start (based on each modules dependencies).  Once this final, ordered list is determined, ATG continues to boot up.  One of the outputs from the ordered list of modules is that each module can contain it's own classes and configuration.  During boot, the ordered list of modules drives the unified classpath and configpath.  This is what determines which classes override others, and which configuration overrides other configuration.  Think of it as a layered approach. The structure of a module is well defined.  It simply looks like a folder in a filesystem that has certain other folders and files within it.  Here is a list of items that can appear in a module: MyModule: META-INF - this is required, along with a file called MANIFEST.MF which describes certain properties of the module.  One important property is what other modules this module depends on. config - this is typically present in most modules.  It defines a tree structure (folders containing properties files, XML, etc) that maps to ATG components (these are described below). lib - this contains the classes (typically in jarred format) for any code defined in this module j2ee - this is where any web-apps would be stored. src - in case you want to include the source code for this module, it's standard practice to put it here sql - if your module requires any additions to the database schema, you should place that schema here Here's a screenshots of a module: Modules can also contain sub-modules.  A dot-notation is used when referring to these sub-modules (i.e. MyModule.Versioned, where Versioned is a sub-module of MyModule). Finally, it is important to completely understand how modules work if you are going to be able to leverage them effectively.  There are many different ways to design modules you want to create, some approaches are better than others, especially if you plan to share functionality between multiple different ATG applications. Components A component in ATG can be thought of as a single item that performs a certain set of related tasks.  An example could be a ProductViews component - used to store information about what products the current customer has viewed.  Components have properties (also called attributes).  The ProductViews component could have properties like lastProductViewed (stores the ID of the last product viewed) or productViewList (stores the ID's of products viewed in order of their being viewed).  The previous examples of component properties would typically also offer get and set methods used to retrieve and store the property values.  Components typically will also offer other types of useful methods aside from get and set.  In the ProductViewed component, we might want to offer a hasViewed method which will tell you if the customer has viewed a certain product or not. Components are organized in a tree like hierarchy called 'nucleus'.  Nucleus is used to locate and instantiate ATG Components.  So, when you create a new ATG component, it will be able to be found 'within' nucleus.  Nucleus allows ATG components to reference one another - this is how components are strung together to perform meaningful work.  It's also a mechanism to prevent redundant configuration - define it once and refer to it from everywhere. Here is a screenshot of a component in nucleus:  Components can be extremely simple (i.e. a single property with a get method), or can be rather complex offering many properties and methods.  To be an ATG component, a few things are required: a class - you can reference an existing out of the box class or you could write your own a properties file - this is used to define your component the above items must be located 'within' nucleus by placing them in the correct spot in your module's config folder Within the properties file, you will need to point to the class you want to use: $class=com.mycompany.myclass You may also want to define the scope of the class (request, session, or global): $scope=session In summary, ATG Components live in nucleus, generally have links to other components, and provide some meaningful type of work.  You can configure components as well as extend their functionality by writing code. Repositories Repositories (a.k.a. Data Anywhere Architecture) is the mechanism that ATG uses to access data primarily stored in relational databases, but also LDAP or other backend systems.  ATG applications are required to be very high performance, and data access is critical in that if not handled properly, it could create a bottleneck.  ATG's repository functionality has been around for a long time - it's proven to be extremely scalable.  Developers new to ATG need to understand how repositories work as this is a critical aspect of the ATG architecture.   Repositories essentially map relational tables to objects in ATG, as well as handle caching.  ATG defines many repositories out of the box (i.e. user profile, catalog, orders, etc), and this is comprised of both the underlying database schema along with the associated repository definition files (XML).  It is fully expected that implementations will extend / change the out of the box repository definitions, so there is a prescribed approach to doing this.  The first thing to be sure of is to encapsulate your repository definition additions / changes within your own module (as described above).  The other important best practice is to never modify the out of the box schema - in other words, don't add columns to existing ATG tables, just create your own new tables.  These will help ensure you can easily upgrade your application at a later date. xml-combination As mentioned earlier, when you start ATG, the order of the modules will determine the final configpath.  Files within this configpath are 'layered' such that modules on top can override configuration of modules below it.  This is the same concept for repository definition files.  If you want to add a few properties to the out of the box user profile, you simply need to create an XML file containing only your additions, and place it in the correct location in your module.  At boot time, your definition will be combined (hence the term xml-combination) with the lower, out of the box modules, with the result being a user profile that contains everything (out of the box, plus your additions).  Aside from just adding properties, there are also ways to remove and change properties. types of properties Aside from the normal 'database backed' properties, there are a few other interesting types: transient properties - these are properties that are in memory, but not backed by any database column.  These are useful for temporary storage. java-backed properties - by nature, these are transient, but in addition, when you access this property (by called the get method) instead of looking up a piece of data, it performs some logic and returns the results.  'Age' is a good example - if you're storing a birth date on the profile, but your business rules are defined in terms of someones age, you could create a simple java-backed property to look at the birth date and compare it to the current date, and return the persons age. derived properties - this is what allows for inheritance within the repository structure.  You could define a property at the category level, and have the product inherit it's value as well as override it.  This is useful for setting defaults, with the ability to override. caching There are a number of different caching modes which are useful at different times depending on the nature of the data being cached.  For example, the simple cache mode is useful for things like user profiles.  This is because the user profile will typically only be used on a single instance of ATG at one time.  Simple cache mode is also useful for read-only types of data such as the product catalog.  Locked cache mode is useful when you need to ensure that only one ATG instance writes to a particular item at a time - an example would be a customers order.  There are many options in terms of configuring caching which are outside the scope of this article - please refer to the product manuals for more details. Other important concepts - out of scope for this article There are a whole host of concepts that are very important pieces to the ATG platform, but are out of scope for this article.  Here's a brief description of some of them: formhandlers - these are ATG components that handle form submissions by users. pipelines - these are configurable chains of logic that are used for things like handling a request (request pipeline) or checking out an order. special kinds of repositories (versioned, files, secure, ...) - there are a couple different types of repositories that are used in various situations.  See the manuals for more information. web development - JSP/ DSP tag library - ATG provides a traditional approach to developing web applications by providing a tag library called the DSP library.  This library is used throughout your JSP pages to interact with all the ATG components. messaging - a message sub-system used as another way for components to interact. personalization - ability for business users to define a personalized user experience for customers.  See the other blog posts related to personalization.

  Read the article

• Working with Timelines with LINQ to Twitter

  - by Joe Mayo

  When first working with the Twitter API, I thought that using SinceID would be an effective way to page through timelines. In practice it doesn’t work well for various reasons. To explain why, Twitter published an excellent document that is a must-read for anyone working with timelines: Twitter Documentation: Working with Timelines This post shows how to implement the recommended strategies in that document by using LINQ to Twitter. You should read the document in it’s entirety before moving on because my explanation will start at the bottom and work back up to the top in relation to the Twitter document. What follows is an explanation of SinceID, MaxID, and how they come together to help you efficiently work with Twitter timelines. The Role of SinceID Specifying SinceID says to Twitter, “Don’t return tweets earlier than this”. What you want to do is store this value after every timeline query set so that it can be reused on the next set of queries.  The next section will explain what I mean by query set, but a quick explanation is that it’s a loop that gets all new tweets. The SinceID is a backstop to avoid retrieving tweets that you already have. Here’s some initialization code that includes a variable named sinceID that will be used to populate the SinceID property in subsequent queries: // last tweet processed on previous query set ulong sinceID = 210024053698867204; ulong maxID; const int Count = 10; var statusList = new List<status>(); Here, I’ve hard-coded the sinceID variable, but this is where you would initialize sinceID from whatever storage you choose (i.e. a database). The first time you ever run this code, you won’t have a value from a previous query set. Initially setting it to 0 might sound like a good idea, but what if you’re querying a timeline with lots of tweets? Because of the number of tweets and rate limits, your query set might take a very long time to run. A caveat might be that Twitter won’t return an entire timeline back to Tweet #0, but rather only go back a certain period of time, the limits of which are documented for individual Twitter timeline API resources. So, to initialize SinceID at too low of a number can result in a lot of initial tweets, yet there is a limit to how far you can go back. What you’re trying to accomplish in your application should guide you in how to initially set SinceID. I have more to say about SinceID later in this post. The other variables initialized above include the declaration for MaxID, Count, and statusList. The statusList variable is a holder for all the timeline tweets collected during this query set. You can set Count to any value you want as the largest number of tweets to retrieve, as defined by individual Twitter timeline API resources. To effectively page results, you’ll use the maxID variable to set the MaxID property in queries, which I’ll discuss next. Initializing MaxID On your first query of a query set, MaxID will be whatever the most recent tweet is that you get back. Further, you don’t know what MaxID is until after the initial query. The technique used in this post is to do an initial query and then use the results to figure out what the next MaxID will be.  Here’s the code for the initial query: var userStatusResponse = (from tweet in twitterCtx.Status where tweet.Type == StatusType.User && tweet.ScreenName == "JoeMayo" && tweet.SinceID == sinceID && tweet.Count == Count select tweet) .ToList(); statusList.AddRange(userStatusResponse); // first tweet processed on current query maxID = userStatusResponse.Min( status => ulong.Parse(status.StatusID)) - 1; The query above sets both SinceID and Count properties. As explained earlier, Count is the largest number of tweets to return, but the number can be less. A couple reasons why the number of tweets that are returned could be less than Count include the fact that the user, specified by ScreenName, might not have tweeted Count times yet or might not have tweeted at least Count times within the maximum number of tweets that can be returned by the Twitter timeline API resource. Another reason could be because there aren’t Count tweets between now and the tweet ID specified by sinceID. Setting SinceID constrains the results to only those tweets that occurred after the specified Tweet ID, assigned via the sinceID variable in the query above. The statusList is an accumulator of all tweets receive during this query set. To simplify the code, I left out some logic to check whether there were no tweets returned. If  the query above doesn’t return any tweets, you’ll receive an exception when trying to perform operations on an empty list. Yeah, I cheated again. Besides querying initial tweets, what’s important about this code is the final line that sets maxID. It retrieves the lowest numbered status ID in the results. Since the lowest numbered status ID is for a tweet we already have, the code decrements the result by one to keep from asking for that tweet again. Remember, SinceID is not inclusive, but MaxID is. The maxID variable is now set to the highest possible tweet ID that can be returned in the next query. The next section explains how to use MaxID to help get the remaining tweets in the query set. Retrieving Remaining Tweets Earlier in this post, I defined a term that I called a query set. Essentially, this is a group of requests to Twitter that you perform to get all new tweets. A single query might not be enough to get all new tweets, so you’ll have to start at the top of the list that Twitter returns and keep making requests until you have all new tweets. The previous section showed the first query of the query set. The code below is a loop that completes the query set: do { // now add sinceID and maxID userStatusResponse = (from tweet in twitterCtx.Status where tweet.Type == StatusType.User && tweet.ScreenName == "JoeMayo" && tweet.Count == Count && tweet.SinceID == sinceID && tweet.MaxID == maxID select tweet) .ToList(); if (userStatusResponse.Count > 0) { // first tweet processed on current query maxID = userStatusResponse.Min( status => ulong.Parse(status.StatusID)) - 1; statusList.AddRange(userStatusResponse); } } while (userStatusResponse.Count != 0 && statusList.Count < 30); Here we have another query, but this time it includes the MaxID property. The SinceID property prevents reading tweets that we’ve already read and Count specifies the largest number of tweets to return. Earlier, I mentioned how it was important to check how many tweets were returned because failing to do so will result in an exception when subsequent code runs on an empty list. The code above protects against this problem by only working with the results if Twitter actually returns tweets. Reasons why there wouldn’t be results include: if the first query got all the new tweets there wouldn’t be more to get and there might not have been any new tweets between the SinceID and MaxID settings of the most recent query. The code for loading the returned tweets into statusList and getting the maxID are the same as previously explained. The important point here is that MaxID is being reset, not SinceID. As explained in the Twitter documentation, paging occurs from the newest tweets to oldest, so setting MaxID lets us move from the most recent tweets down to the oldest as specified by SinceID. The two loop conditions cause the loop to continue as long as tweets are being read or a max number of tweets have been read.  Logically, you want to stop reading when you’ve read all the tweets and that’s indicated by the fact that the most recent query did not return results. I put the check to stop after 30 tweets are reached to keep the demo from running too long – in the console the response scrolls past available buffer and I wanted you to be able to see the complete output. Yet, there’s another point to be made about constraining the number of items you return at one time. The Twitter API has rate limits and making too many queries per minute will result in an error from twitter that LINQ to Twitter raises as an exception. To use the API properly, you’ll have to ensure you don’t exceed this threshold. Looking at the statusList.Count as done above is rather primitive, but you can implement your own logic to properly manage your rate limit. Yeah, I cheated again. Summary Now you know how to use LINQ to Twitter to work with Twitter timelines. After reading this post, you have a better idea of the role of SinceID - the oldest tweet already received. You also know that MaxID is the largest tweet ID to retrieve in a query. Together, these settings allow you to page through results via one or more queries. You also understand what factors affect the number of tweets returned and considerations for potential error handling logic. The full example of the code for this post is included in the downloadable source code for LINQ to Twitter.   @JoeMayo

  Read the article

• How to make a player stay within bounds of world with 2D Camera

  - by Craig

  Im creating a simple top down survival game. At the moment, i have the sprite which is a ship and moves by rotating left or right then going forward in that direction. I have implemented a 2D camera, its always centered on the player. However, when i move towards the bounds of the world that the sprite is in it just keeps on going :( How to i sort it that it stops at the edge of the world and cant go beyond it? Cheers :) Below is the main game class using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace GamesCoursework_1 { /// <summary> /// This is the main type for your game /// </summary> public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; // player variables Texture2D Ship; Vector2 Ship_Position; float Ship_Rotation = 0.0f; Vector2 Ship_Origin; Vector2 Ship_Velocity; const float tangentialVelocity = 4f; float friction = 0.05f; static Point CameraViewport = new Point(800, 800); Camera2d cam = new Camera2d((int)CameraViewport.X, (int)CameraViewport.Y); //Size of world static Point worldSize = new Point(1600, 1600); // Screen variables static Point worldCenter = new Point(worldSize.X / 2, worldSize.Y / 2); Rectangle playerBounds = new Rectangle(CameraViewport.X / 2, CameraViewport.Y / 2, worldSize.X - CameraViewport.X, worldSize.Y - CameraViewport.Y); Rectangle worldBounds = new Rectangle(0, 0, worldSize.X, worldSize.Y); Texture2D background; public Game1() { graphics = new GraphicsDeviceManager(this); graphics.PreferredBackBufferWidth = CameraViewport.X; graphics.PreferredBackBufferHeight = CameraViewport.Y; Content.RootDirectory = "Content"; } /// <summary> /// Allows the game to perform any initialization it needs to before starting to run. /// This is where it can query for any required services and load any non-graphic /// related content. Calling base.Initialize will enumerate through any components /// and initialize them as well. /// </summary> protected override void Initialize() { // TODO: Add your initialization logic here base.Initialize(); } /// <summary> /// LoadContent will be called once per game and is the place to load /// all of your content. /// </summary> protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. spriteBatch = new SpriteBatch(GraphicsDevice); // TODO: use this.Content to load your game content here Ship = Content.Load<Texture2D>("Ship"); Ship_Origin.X = Ship.Width / 2; Ship_Origin.Y = Ship.Height / 2; background = Content.Load<Texture2D>("aus"); Ship_Position = new Vector2(worldCenter.X, worldCenter.Y); cam.Pos = Ship_Position; cam.Zoom = 1f; } /// <summary> /// UnloadContent will be called once per game and is the place to unload /// all content. /// </summary> protected override void UnloadContent() { // TODO: Unload any non ContentManager content here } /// <summary> /// Allows the game to run logic such as updating the world, /// checking for collisions, gathering input, and playing audio. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); // TODO: Add your update logic here Ship_Position = Ship_Velocity + Ship_Position; keyPressed(); base.Update(gameTime); } /// <summary> /// This is called when the game should draw itself. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); // TODO: Add your drawing code here spriteBatch.Begin(SpriteSortMode.Deferred, BlendState.AlphaBlend, null, null, null,null, cam.get_transformation(GraphicsDevice)); spriteBatch.Draw(background, Vector2.Zero, Color.White); spriteBatch.Draw(Ship, Ship_Position, Ship.Bounds, Color.White, Ship_Rotation, Ship_Origin, 1.0f, SpriteEffects.None, 0f); spriteBatch.End(); base.Draw(gameTime); } private void Ship_Move(Vector2 move) { Ship_Position += move; } private void keyPressed() { KeyboardState keyState; // Move right keyState = Keyboard.GetState(); if (keyState.IsKeyDown(Keys.Right)) { Ship_Rotation = Ship_Rotation + 0.1f; } if (keyState.IsKeyDown(Keys.Left)) { Ship_Rotation = Ship_Rotation - 0.1f; } if (keyState.IsKeyDown(Keys.Up)) { Ship_Velocity.X = (float)Math.Cos(Ship_Rotation) * tangentialVelocity; Ship_Velocity.Y = (float)Math.Sin(Ship_Rotation) * tangentialVelocity; if ((int)Ship_Position.Y < playerBounds.Bottom && (int)Ship_Position.Y > playerBounds.Top) cam._pos.Y = Ship_Position.Y; if ((int)Ship_Position.X > playerBounds.Left && (int)Ship_Position.X < playerBounds.Right) cam._pos.X = Ship_Position.X; //tried world bounds here if (!worldBounds.Contains(new Point((int)Ship_Position.X, (int)Ship_Position.Y))) Ship_Position -= new Vector2(0.0f, -tangentialVelocity * 2); if (!worldBounds.Contains(new Point((int)Ship_Position.X, (int)Ship_Position.Y))) Ship_Position -= new Vector2(0.0f, 2 * tangentialVelocity); } else if(Ship_Velocity != Vector2.Zero) { float i = Ship_Velocity.X; float j = Ship_Velocity.Y; Ship_Velocity.X = i -= friction * i; Ship_Velocity.Y = j -= friction * j; if ((int)Ship_Position.Y < playerBounds.Bottom && (int)Ship_Position.Y > playerBounds.Top) cam._pos.Y = Ship_Position.Y; if ((int)Ship_Position.X > playerBounds.Left && (int)Ship_Position.X < playerBounds.Right) cam._pos.X = Ship_Position.X; } if (keyState.IsKeyDown(Keys.Q)) { if (cam.Zoom < 2f) cam.Zoom += 0.05f; } if (keyState.IsKeyDown(Keys.A)) { if (cam.Zoom > 0.3f) cam.Zoom -= 0.05f; } } } } my 2d camera class using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Graphics; namespace GamesCoursework_1 { public class Camera2d { protected float _zoom; // Camera Zoom public Matrix _transform; // Matrix Transform public Vector2 _pos; // Camera Position protected float _rotation; // Camera Rotation public int _viewportWidth, _viewportHeight; // viewport size public Camera2d(int ViewportWidth, int ViewportHeight) { _zoom = 1.0f; _rotation = 0.0f; _pos = Vector2.Zero; _viewportWidth = ViewportWidth; _viewportHeight = ViewportHeight; } // Sets and gets zoom public float Zoom { get { return _zoom; } set { _zoom = value; if (_zoom < 0.1f) _zoom = 0.1f; } // Negative zoom will flip image } public float Rotation { get { return _rotation; } set { _rotation = value; } } // Auxiliary function to move the camera public void Move(Vector2 amount) { _pos += amount; } // Get set position public Vector2 Pos { get { return _pos; } set { _pos = value; } } public Matrix get_transformation(GraphicsDevice graphicsDevice) { _transform = // Thanks to o KB o for this solution Matrix.CreateTranslation(new Vector3(-_pos.X, -_pos.Y, 0)) * Matrix.CreateRotationZ(Rotation) * Matrix.CreateScale(new Vector3(Zoom, Zoom, 1)) * Matrix.CreateTranslation(new Vector3(_viewportWidth * 0.5f, _viewportHeight * 0.5f, 0)); return _transform; } } }

  Read the article

• AddHandler not working?

  - by EdenMachine

  I can't figure out why my addhandler is not firing? In the Sub "CreateTagStyle" thd AddHandler is to firing when the LinkButton is clicked Is there some reason that addhandlers can't be adding at certain points of the page lifecycle? <%@ Page Title="" Language="VB" MasterPageFile="~/_Common/Admin.master" %> <script runat="server"> Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) End Sub Protected Sub RadGrid1_NeedDataSource(ByVal source As Object, ByVal e As Telerik.Web.UI.GridNeedDataSourceEventArgs) If Not e.IsFromDetailTable Then Dim forms As New MB.RequestFormPacket() RadGrid1.DataSource = forms.GetPackets() End If End Sub Protected Sub RadGrid1_DetailTableDataBind(ByVal source As Object, ByVal e As Telerik.Web.UI.GridDetailTableDataBindEventArgs) Select Case e.DetailTableView.Name Case "gtvForms" Dim PacketID As Guid = e.DetailTableView.ParentItem.GetDataKeyValue("ID") e.DetailTableView.DataSource = MB.RequestForm.GetRequestForms(PacketID) End Select End Sub Protected Sub RadGrid1_InsertCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) If IsValid Then Select Case TryCast(e.Item.NamingContainer.NamingContainer, GridTableView).Name Case "gtvPackets" Dim rtbName As RadTextBox = TryCast(e.Item.FindControl("rtbName"), RadTextBox) Dim IsActive As Boolean = TryCast(e.Item.FindControl("cbxIsActive"), CheckBox).Checked Dim packet As New MB.RequestFormPacket() packet.Name = rtbName.Text packet.IsActive = IsActive packet.Insert() e.Canceled = True e.Item.OwnerTableView.IsItemInserted = False RadGrid1.Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Request Form Packet has been added successfully.');", True) Case "gtvForms" Dim parentItem As GridDataItem = e.Item.OwnerTableView.ParentItem Dim rcbForms As RadComboBox = TryCast(e.Item.FindControl("rcbForms"), RadComboBox) Dim rf As New MB.RequestForm() rf.RequestFormPacketID = CType(parentItem.OwnerTableView.DataKeyValues(parentItem.ItemIndex)("ID"), Guid) rf.FormID = rcbForms.SelectedValue If MB.RequestFormPacket.HasItems(rf.RequestFormPacketID) Then rf.SortOrder = rf.MaxSortOrder + 1 Else rf.SortOrder = 0 End If rf.Insert() e.Canceled = True e.Item.OwnerTableView.IsItemInserted = False TryCast(e.Item.NamingContainer.NamingContainer, GridTableView).Rebind() End Select End If End Sub Protected Sub RadGrid1_UpdateCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) If IsValid Then Select Case TryCast(e.Item.NamingContainer, GridTableView).Name Case "gtvPackets" Dim PacketID As Guid = CType(CType(e.CommandSource, Button).NamingContainer, GridEditFormItem).GetDataKeyValue("ID") Dim Name As String = TryCast(e.Item.FindControl("rtbName"), RadTextBox).Text Dim Tags As String = TryCast(e.Item.FindControl("hdnTags"), HiddenField).Value Dim IsActive As Boolean = TryCast(e.Item.FindControl("cbxIsActive"), CheckBox).Checked Dim rfp As New MB.RequestFormPacket() rfp.Update(PacketID, Name, IsActive) Call MB.RequestFormPacketTag.Insert(PacketID, Tags) e.Item.Edit = False TryCast(e.Item.NamingContainer, GridTableView).Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Request Form Packet has been updated successfully.');", True) Case "gtvForms" Dim RequestFormID As Guid = CType(CType(e.CommandSource, Button).NamingContainer, GridEditFormItem).GetDataKeyValue("ID") Dim rcbForms As RadComboBox = TryCast(e.Item.FindControl("rcbForms"), RadComboBox) Dim rf As New MB.RequestForm() rf.Update(RequestFormID, rcbForms.SelectedValue) e.Item.Edit = False TryCast(e.Item.NamingContainer, GridTableView).Rebind() End Select End If End Sub Protected Sub RadGrid1_DeleteCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) Dim editedItem As GridEditableItem = TryCast(e.Item, GridEditableItem) Select Case CType(editedItem.Parent.Parent, GridTableView).Name Case "gtvPackets" Dim ID As Guid = CType(CType(e.CommandSource, ImageButton).NamingContainer, GridDataItem).GetDataKeyValue("ID") MB.RequestFormPacket.Delete(ID) System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "NotifyMessage('Request Form Packet has been deleted.');", True) Case "gtvForms" Dim ID As Guid = CType(CType(e.CommandSource, ImageButton).NamingContainer, GridDataItem).GetDataKeyValue("ID") MB.RequestForm.Delete(ID) System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "NotifyMessage('Request Form has been removed.');", True) End Select End Sub Protected Sub ibnItemUpArrow_Command(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Dim gtv As GridTableView = CType(CType(sender, ImageButton).NamingContainer.NamingContainer, GridTableView) Dim ID As Guid = New Guid(e.CommandArgument.ToString()) Call MB.RequestForm.MoveUp(ID) gtv.Rebind() End Sub Protected Sub ibnItemDownArrow_Command(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Dim gtv As GridTableView = CType(CType(sender, ImageButton).NamingContainer.NamingContainer, GridTableView) Dim ID As Guid = New Guid(e.CommandArgument.ToString()) Call MB.RequestForm.MoveDown(ID) gtv.Rebind() End Sub Protected Sub RadGrid1_RowDrop(ByVal sender As Object, ByVal e As Telerik.Web.UI.GridDragDropEventArgs) If String.IsNullOrEmpty(e.HtmlElement) Then If e.DraggedItems(0).OwnerGridID = RadGrid1.ClientID Then If e.DestDataItem IsNot Nothing Then Dim gtv As GridTableView = CType(e.DestDataItem.NamingContainer, GridTableView) For Each gdi As GridDataItem In e.DraggedItems Select Case gtv.Name Case "gtvForms" MB.RequestForm.DragAndDropReorder(gdi.GetDataKeyValue("ID"), e.DestDataItem.GetDataKeyValue("ID"), IIf(e.DropPosition = GridItemDropPosition.Above, True, False)) gtv.Rebind() End Select Next End If End If End If End Sub Protected Sub cbxAllowDragAndDrop_CheckedChanged(ByVal sender As Object, ByVal e As System.EventArgs) Dim cbx As CheckBox = CType(sender, CheckBox) If cbx.Checked Then RadGrid1.ClientSettings.AllowRowsDragDrop = True RadGrid1.ClientSettings.Selecting.AllowRowSelect = True RadGrid1.ClientSettings.Selecting.EnableDragToSelectRows = True Else RadGrid1.ClientSettings.AllowRowsDragDrop = False RadGrid1.ClientSettings.Selecting.AllowRowSelect = False RadGrid1.ClientSettings.Selecting.EnableDragToSelectRows = False End If End Sub Protected Sub ibnDisableToggleProcess_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Dim ibn As ImageButton = CType(sender, ImageButton) Dim hdn As HiddenField = CType(ibn.NamingContainer.FindControl("hdnDisableProcessID"), HiddenField) Dim status As Boolean = MB.RequestFormPacket.ActivateToggle(New Guid(hdn.Value)) Dim gtv As GridTableView = CType(ibn.NamingContainer.NamingContainer, GridTableView) gtv.Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Process has been " & IIf(status, "Activated", "Deactivated") & ".');", True) End Sub Protected Function DisplayTagList(ByVal tags As IEnumerable(Of MB.RequestFormPacketTag)) As String Dim list As String = "" For Each t As MB.RequestFormPacketTag In tags list += "<span class=""tags"">" & t.Tag.Name & "</span>" Next Return list End Function Protected Sub RadGrid1_ItemDataBound(ByVal sender As Object, ByVal e As Telerik.Web.UI.GridItemEventArgs) Select Case e.Item.GetType.Name Case "GridEditFormInsertItem" 'do nothing Case "GridEditFormItem" Dim plh As PlaceHolder = CType(e.Item.FindControl("plhTags"), PlaceHolder) Dim hdn As HiddenField = CType(e.Item.FindControl("hdnTags"), HiddenField) If hdn IsNot Nothing Then Dim gefi As GridEditFormItem = e.Item Dim packet As MB.RequestFormPacket = gefi.DataItem For Each pt As MB.RequestFormPacketTag In packet.RequestFormPacketTags Call CreateTagStyle(plh, hdn, pt.Tag.Name) If hdn.Value = "" Then hdn.Value = "|" End If hdn.Value += pt.Tag.Name & "|" Next End If End Select End Sub Protected Sub btnAddTag_Click(ByVal sender As Object, ByVal e As System.EventArgs) Dim btnAddTag As Button = sender Dim rtbTags As RadTextBox = btnAddTag.NamingContainer.FindControl("rtbTags") Dim plhTags As PlaceHolder = btnAddTag.NamingContainer.FindControl("plhTags") Dim hdnTags As HiddenField = btnAddTag.NamingContainer.FindControl("hdnTags") Dim TagExists As Boolean = False rtbTags.Text = rtbTags.Text.ToUpper().Trim() Dim currentTags() As String = Split(hdnTags.Value, "|") For i As Integer = 1 To currentTags.Count - 2 Call CreateTagStyle(plhTags, hdnTags, currentTags(i)) Next If TagExists = False And String.IsNullOrEmpty(rtbTags.Text) = False Then Call CreateTagStyle(plhTags, hdnTags, rtbTags.Text) If String.IsNullOrEmpty(hdnTags.Value) Then hdnTags.Value = "|" End If hdnTags.Value += rtbTags.Text & "|" 'System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "highlightTag('" & lbn.ClientID & "');", True) End If rtbTags.Text = "" rtbTags.Focus() End Sub Public Sub RemoveTag(ByVal sender As Object, ByVal e As EventArgs) Response.End() Dim lbnSender As LinkButton = sender Dim plhTags As PlaceHolder = lbnSender.NamingContainer.FindControl("plhTags") Dim hdnTags As HiddenField = lbnSender.NamingContainer.FindControl("hdnTags") Response.Write(hdnTags.Value) Response.End() Dim TagExists As Boolean = False Dim currentTags() As String = Split(hdnTags.Value, "|") For i As Integer = 1 To currentTags.Count - 2 Call CreateTagStyle(plhTags, hdnTags, currentTags(i)) Next End Sub Protected Sub CreateTagStyle(ByVal plh As PlaceHolder, ByVal hdn As HiddenField, ByVal tagName As String) Dim lbn As New LinkButton() lbn.ID = "lbn_" & hdn.ClientID & "_" & tagName lbn.CssClass = "deleteCreateTag" lbn.Text = "X" AddHandler lbn.Click, AddressOf RemoveTag plh.Controls.Add(New LiteralControl("<div><span class=showTag>" & tagName & "</span>")) plh.Controls.Add(lbn) plh.Controls.Add(New LiteralControl("</div>")) End Sub </script> <asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server"> <style type="text/css"> .tags { border:solid 1px #93AFE5; background-color:#F3F7F8; margin: 0px 2px 0px 2px; padding: 0px 4px 0px 4px; font-family:Verdana; font-size:10px; text-transform:uppercase; } </style> <script type="text/javascript"> function highlightTag(id) { $("#" + id).highlightFade({ color: '#FFFF99', speed: 2000, iterator: 'sinusoidal' }); } </script> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <telerik:RadAjaxManager ID="RadAjaxManager1" runat="server" DefaultLoadingPanelID="RadAjaxLoadingPanel1" EnableAJAX="false"> <AjaxSettings> <telerik:AjaxSetting AjaxControlID="RadGrid1"> <UpdatedControls> <telerik:AjaxUpdatedControl ControlID="RadGrid1" /> </UpdatedControls> </telerik:AjaxSetting> </AjaxSettings> </telerik:RadAjaxManager> <telerik:RadAjaxLoadingPanel ID="RadAjaxLoadingPanel1" runat="server" /> <telerik:RadTabStrip ID="RadTabStrip1" runat="server" Skin="WebBlue" style="position:relative;top:1px;" ValidationGroup="vgTabs"> <Tabs> <telerik:RadTab Text="Request Form Packets" Selected="true" ImageUrl="~/Admin/Images/Packet2.png" /> <telerik:RadTab Text="Request Forms" NavigateUrl="Forms.aspx" ImageUrl="~/Admin/Images/Forms.png" /> </Tabs> </telerik:RadTabStrip> <asp:ObjectDataSource ID="odsForms" runat="server" TypeName="MB.Form" SelectMethod="GetForms" /> <asp:Panel ID="pnlContent" runat="server" CssClass="ContentPanel"> <telerik:RadGrid ID="RadGrid1" runat="server" AllowPaging="True" AllowSorting="True" GridLines="None" OnNeedDataSource="RadGrid1_NeedDataSource" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true" AllowAutomaticInserts="true" OnInsertCommand="RadGrid1_InsertCommand" OnUpdateCommand="RadGrid1_UpdateCommand" OnDeleteCommand="RadGrid1_DeleteCommand" OnRowDrop="RadGrid1_RowDrop" OnDetailTableDataBind="RadGrid1_DetailTableDataBind" OnItemDataBound="RadGrid1_ItemDataBound"> <%-----------------------------------------------------------%> <%------------------------- PACKETS -------------------------%> <%-----------------------------------------------------------%> <MasterTableView AutoGenerateColumns="False" DataKeyNames="ID" ClientDataKeyNames="ID" ShowHeadersWhenNoRecords="true" Name="gtvPackets" NoMasterRecordsText="There are currently no Request Form Packets" GroupLoadMode="Client" RetrieveNullAsDBNull="true" CommandItemDisplay="Top" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true" AllowAutomaticInserts="true"> <RowIndicatorColumn> <HeaderStyle Width="20px"></HeaderStyle> </RowIndicatorColumn> <ExpandCollapseColumn> <HeaderStyle Width="20px"></HeaderStyle> </ExpandCollapseColumn> <CommandItemTemplate> <table width="100%"> <tr> <td class="AdminGridHeader">&nbsp;<img src="../Admin/Images/Packet2.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;Request Form Packets</td> <td width="1%"><asp:CheckBox ID="cbxAllowDragAndDrop" runat="server" AutoPostBack="true" OnCheckedChanged="cbxAllowDragAndDrop_CheckedChanged" /></td> <td width="1%" nowrap="nowrap"><asp:Label AssociatedControlID="cbxAllowDragAndDrop" ID="Label1" runat="server" Text="Enable Drag and Drop Reordering" ToolTip="Drag and Drop Reordering applies only to Forms." /></td> <td align="right" width="1%"><asp:Button ID="btnAddPacket" Text="Create New Packet" runat="server" CommandName="InitInsert" /></td> </tr> </table> </CommandItemTemplate> <EditFormSettings> <EditColumn ButtonType="PushButton" HeaderStyle-Font-Bold="true" UniqueName="EditCommandColumn" /> </EditFormSettings> <EditItemStyle Font-Bold="true" BackColor="#FFFFCC" /> <Columns> <telerik:GridTemplateColumn HeaderText="Packet Name" UniqueName="PacketName" SortExpression="Name"> <ItemTemplate> <img src="../Admin/Images/Packet2.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;<%#Eval("Name")%> </ItemTemplate> <EditItemTemplate> <telerik:RadTextBox runat="server" ID="rtbName" Width="300" Text='<%# Bind("Name") %>' /> <asp:RequiredFieldValidator ID="rfvName" runat="server" ErrorMessage="Required" ControlToValidate="rtbName" /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Tags" UniqueName="Tags"> <ItemTemplate> <%#DisplayTagList(Eval("RequestFormPacketTags"))%> </ItemTemplate> <EditItemTemplate> <asp:Panel ID="pnlAddTags" runat="server" DefaultButton="btnAddTag"> <table cellpadding="0" cellspacing="0"> <tr> <td> <telerik:RadTextBox ID="rtbTags" runat="server" Width="200" style="text-transform:uppercase;" /> <asp:RegularExpressionValidator ID="revTags" runat="server" ErrorMessage="Invalid Entry" ControlToValidate="rtbTags" Display="Dynamic" ValidationExpression="^[^<>`~!/@\#}$%:;)(_^{&*=|+]+$" ValidationGroup="vgTags" /> </td> <td> <asp:Button ID="btnAddTag" runat="server" ValidationGroup="vgTags" Text="Add" OnClick="btnAddTag_Click" /> </td> </tr> </table> </asp:Panel> <div id="divTags"> <asp:PlaceHolder id="plhTags" runat="server" /> <asp:HiddenField ID="hdnTags" runat="server" /> </div> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderTooltip="Disable" ItemStyle-Width="1%" ItemStyle-HorizontalAlign="Center" SortExpression="IsActive" UniqueName="IsActive" ReadOnly="true"> <ItemTemplate> <asp:ImageButton ID="ibnDisabledProcess" runat="server" ImageUrl="../Images/Icons/Stop.png" Width="16" OnClientClick="return window.confirm('Activate this Process?');" ToolTip="Click to activate this Request for Account use." Visible='<%#IIF(Eval("IsActive"),false,true) %>' OnClick="ibnDisableToggleProcess_Click" /> <asp:ImageButton ID="ibnEnabledProcess" runat="server" ImageUrl="../Images/Icons/Stop_disabled.png" Width="16" OnClientClick="return window.confirm('Deactivate this Process?');" ToolTip="Click to deactivate this Request for Account use." Visible='<%#IIF(Eval("IsActive"),true,false) %>' OnClick="ibnDisableToggleProcess_Click" /> <asp:HiddenField ID="hdnDisableProcessID" runat="server" Value='<%#Eval("ID") %>' /> </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Is Active" UniqueName="IsActiveCheckbox" Display="false"> <EditItemTemplate> <asp:CheckBox ID="cbxIsActive" runat="server" Checked='<%# IIF(Eval("IsActive") Is DbNull.Value OrElse Eval("IsActive") = False,False,True) %>' /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridEditCommandColumn ButtonType="ImageButton" EditText="Edit Admin" ItemStyle-Width="16" EditImageUrl="~/Images/edit-small.png" /> <telerik:GridButtonColumn ConfirmText="Do you really want to delete this Admin? WARNING: THIS CANNOT BE UNDONE!!" ConfirmDialogType="RadWindow" ConfirmTitle="Delete" ButtonType="ImageButton" CommandName="Delete" Text="Delete Admin" ImageUrl="~/Images/Delete.png" UniqueName="DeleteColumn"> <ItemStyle HorizontalAlign="Center" Width="16" /> </telerik:GridButtonColumn> </Columns> <DetailTables> <%-----------------------------------------------------------%> <%-------------------------- FORMS --------------------------%> <%-----------------------------------------------------------%> <telerik:GridTableView Name="gtvForms" AllowPaging="true" PagerStyle-Position="TopAndBottom" PageSize="20" AutoGenerateColumns="false" DataKeyNames="RequestFormPacketID,ID" runat="server" CommandItemDisplay="Top" Width="100%"> <ParentTableRelation> <telerik:GridRelationFields DetailKeyField="RequestFormPacketID" MasterKeyField="ID" /> </ParentTableRelation> <CommandItemTemplate> <table width="100%" class="AdminGridHeaders"> <tr> <td class="AdminGridHeaders"> &nbsp;<img src="../Admin/Images/Forms.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;Forms </td> <td align="right"> <asp:Button ID="ibnAdd" runat="server" Text="Add Form" CommandName="InitInsert" /> </td> </tr> </table> </CommandItemTemplate> <EditFormSettings> <EditColumn ButtonType="PushButton" InsertText="Save" UpdateText="Update" CancelText="Cancel" /> </EditFormSettings> <EditItemStyle Font-Bold="true" BackColor="#FFFFCC" /> <Columns> <telerik:GridTemplateColumn HeaderText="Form Name" UniqueName="FormName"> <ItemTemplate> <img src="../Admin/Images/Forms.png" align="absmiddle" width="16" height="16" style="margin-right:4px;" /> <%#Eval("Form.Name")%> </ItemTemplate> <EditItemTemplate> <telerik:RadComboBox ID="rcbForms" runat="server" DataSourceID="odsForms" AppendDataBoundItems="true" DataTextField="Name" DataValueField="ID" SelectedValue='<%#Bind("FormID")%>'> <Items> <telerik:RadComboBoxItem Text="-- Select a Form --" Value="" /> </Items> </telerik:RadComboBox> <asp:RequiredFieldValidator ID="rfvForms" runat="server" ErrorMessage="Required" ControlToValidate="rcbForms" InitialValue="-- Select a Form --" Display="Dynamic" /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Test" ReadOnly="true" UniqueName="TestForm" HeaderStyle-Width="1%" ItemStyle-HorizontalAlign="Center"> <ItemTemplate> <asp:HyperLink ID="hypTestForm" runat="server" NavigateUrl='<%# "FormsPreview.aspx?fid=" & Eval("FormID").ToString() & "&test=true" %>' Target="_blank"><asp:Image ID="imgTestProcess" runat="server" ImageUrl="~/Admin/Images/Test.png" ImageAlign="AbsMiddle" ToolTip="Test Form" /></asp:HyperLink> </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Header" SortExpression="Header" UniqueName="Header"> <ItemTemplate> <%#Eval("Form.Header")%>&nbsp; </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn ReadOnly="true" ItemStyle-HorizontalAlign="Center" HeaderStyle-Width="1%" HeaderStyle-Wrap="false" ItemStyle-Wrap="false" UniqueName="SortOrder"> <ItemTemplate> <asp:ImageButton ID="ibnItemUpArrow" runat="server" Width="16" height="16" ImageUrl="~/Admin/Images/ArrowUp.png" ImageAlign="AbsMiddle" Visible='<%#IIF(Eval("SortOrder") = 0,false,true) %>' CommandArgument='<%#Eval("ID") %>' OnCommand=

  Read the article

• Control to Control Binding in WPF/Silverlight

  - by psheriff

  In the past if you had two controls that you needed to work together, you would have to write code. For example, if you want a label control to display any text a user typed into a text box you would write code to do that. If you want turn off a set of controls when a user checks a check box, you would also have to write code. However, with XAML, these operations become very easy to do. Bind Text Box to Text Block As a basic example of this functionality, let’s bind a TextBlock control to a TextBox. When the user types into a TextBox the value typed in will show up in the TextBlock control as well. To try this out, create a new Silverlight or WPF application in Visual Studio. On the main window or user control type in the following XAML. <StackPanel>  <TextBox Margin="10" x:Name="txtData" />  <TextBlock Margin="10"              Text="{Binding ElementName=txtData,                             Path=Text}" /></StackPanel> Now run the application and type into the TextBox control. As you type you will see the data you type also appear in the TextBlock control. The {Binding} markup extension is responsible for this behavior. You set the ElementName attribute of the Binding markup to the name of the control that you wish to bind to. You then set the Path attribute to the name of the property of that control you wish to bind to. That’s all there is to it! Bind the IsEnabled Property Now let’s apply this concept to something that you might use in a business application. Consider the following two screen shots. The idea is that if the Add Benefits check box is un-checked, then the IsEnabled property of the three “Benefits” check boxes will be set to false (Figure 1). If the Add Benefits check box is checked, then the IsEnabled property of the “Benefits” check boxes will be set to true (Figure 2). Figure 1: Uncheck Add Benefits and the Benefits will be disabled. Figure 2: Check Add Benefits and the Benefits will be enabled. To accomplish this, you would write XAML to bind to each of the check boxes in the “Benefits To Add” section to the check box named chkBenefits. Below is a fragment of the XAML code that would be used. <CheckBox x:Name="chkBenefits" /> <CheckBox Content="401k"           IsEnabled="{Binding ElementName=chkBenefits,                               Path=IsChecked}" /> Since the IsEnabled property is a boolean type and the IsChecked property is also a boolean type, you can bind these two together. If they were different types, or if you needed them to set the IsEnabled property to the inverse of the IsChecked property then you would need to use a ValueConverter class. SummaryOnce you understand the basics of data binding in XAML, you can eliminate a lot code. Connecting controls together is as easy as just setting the ElementName and Path properties of the Binding markup extension. NOTE: You can download the complete sample code at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "SL – Basic Control Binding" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free eBook on "Fundamentals of N-Tier".

  Read the article

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >