Search Results

Search found 3312 results on 133 pages for 'freebsd ports'.

Page 99/133 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

  • pfsense peer-to-peer OpenVPN not connecting

    - by John P
    I'm trying to setup a peer-to-peer OpenVPN between two pfsense servers running 2.0.1-RELEASE, but the client keeps getting the connection dropped, with a status of "reconnecting; ping-restart" and nothing appears to be routing between them. Both these firewalls are also doing PPTP VPNs that are working correctly. FW01 ("server") ======================= LAN: 10.1.1.2/24 WAN: xx.xx.126.34/27 ServerMode: Peer to Peer (Shared Key) Protocol: UDP DeviceMode: tun Interface: WAN Port 1194 Tunnel: 10.0.8.1/30 Local Network: 10.1.1.0/24 Remote Network: 192.168.1.0/24 Firewall Rule in OpenVPN tab: UDP * * * * * none FW03 (client) LAN: 192.168.1.2/24 WAN: xx.xx.9.66/27 ServerMode: Peer to Peer (Shared Key) Protocol: UDP DeviceMode: tun Interface: WAN Server Host: xx.xx.126.34 Tunnel: -- also tried 10.1.8.0/24 Remote Network: 10.1.1.0/24 Client Logs: System Log Apr 6 18:00:08 kernel: ... Restarting packages. Apr 6 18:00:13 check_reload_status: Starting packages Apr 6 18:00:19 php: : Restarting/Starting all packages. Apr 6 18:00:56 kernel: ovpnc1: link state changed to DOWN Apr 6 18:00:56 check_reload_status: Reloading filter Apr 6 18:00:57 check_reload_status: Reloading filter Apr 6 18:00:57 kernel: ovpnc1: link state changed to UP Apr 6 18:00:57 check_reload_status: rc.newwanip starting ovpnc1 Apr 6 18:00:57 check_reload_status: Syncing firewall Apr 6 18:01:02 php: : rc.newwanip: Informational is starting ovpnc1. Apr 6 18:01:02 php: : rc.newwanip: on (IP address: ) (interface: ) (real interface: ovpnc1). Apr 6 18:01:02 php: : rc.newwanip: Failed to update IP, restarting... Apr 6 18:01:02 php: : send_event: sent interface reconfigure got ERROR: incomplete command. all reload reconfigure restart newip linkup sync Client OpenVPN log Apr 6 18:39:14 openvpn[12177]: Inactivity timeout (--ping-restart), restarting Apr 6 18:39:14 openvpn[12177]: SIGUSR1[soft,ping-restart] received, process restarting Apr 6 18:39:16 openvpn[12177]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Apr 6 18:39:16 openvpn[12177]: Re-using pre-shared static key Apr 6 18:39:16 openvpn[12177]: Preserving previous TUN/TAP instance: ovpnc1 Apr 6 18:39:16 openvpn[12177]: UDPv4 link local (bound): [AF_INET]64.94.9.66 Apr 6 18:39:16 openvpn[12177]: UDPv4 link remote: [AF_INET]64.74.126.34:1194 Server OpenVPN log Apr 6 14:40:36 openvpn[22117]: UDPv4 link remote: [undef] Apr 6 14:40:36 openvpn[22117]: UDPv4 link local (bound): [AF_INET]xx.xx.126.34:1194 Apr 6 14:40:36 openvpn[21006]: /usr/local/sbin/ovpn-linkup ovpns1 1500 1557 10.1.8.1 10.1.8.2 init Apr 6 14:40:36 openvpn[21006]: /sbin/ifconfig ovpns1 10.1.8.1 10.1.8.2 mtu 1500 netmask 255.255.255.255 up Apr 6 14:40:36 openvpn[21006]: do_ifconfig, tt-ipv6=0, tt-did_ifconfig_ipv6_setup=0 Apr 6 14:40:36 openvpn[21006]: TUN/TAP device /dev/tun1 opened Apr 6 14:40:36 openvpn[21006]: Control Channel Authentication: using '/var/etc/openvpn/server1.tls-auth' as a OpenVPN static key file Apr 6 14:40:36 openvpn[21006]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Apr 6 14:40:36 openvpn[21006]: OpenVPN 2.2.0 amd64-portbld-freebsd8.1 [SSL] [LZO2] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Aug 11 2011 Apr 6 14:40:36 openvpn[17171]: SIGTERM[hard,] received, process exiting Apr 6 14:40:36 openvpn[17171]: /usr/local/sbin/ovpn-linkdown ovpns1 1500 1557 10.1.8.1 10.1.8.2 init Apr 6 14:40:36 openvpn[17171]: ERROR: FreeBSD route delete command failed: external program exited with error status: 1 Apr 6 14:40:36 openvpn[17171]: event_wait : Interrupted system call (code=4) Apr 6 14:06:32 openvpn[17171]: Initialization Sequence Completed Apr 6 14:06:32 openvpn[17171]: UDPv4 link remote: [undef] Apr 6 14:06:32 openvpn[17171]: UDPv4 link local (bound): [AF_INET]xx.xx.126.34:1194

    Read the article

  • Why Does Wireless Gear Degrade Over Time?

    - by bahamat
    I saw this originally posted on slashdot, but their comment format is not conducive to actually getting a correct answer. Having directly experienced this phenomenon myself, I'm now asking here where I think I can actually get an educated answer. Here's the original question verbatim: Lately I have replaced several home wireless routers because the signal strength has been found to be degraded. These devices, when new (2+ years ago) would cover an entire house. Over the years, the strength seems to decrease to a point where it might only cover one or two rooms. Of the three that I have replaced for friends, I have not found a common brand, age, etc. It just seems that after time, the signal strength decreases. I know that routers are cheap and easy to replace but I'm curious what actually causes this. I would have assumed that the components would either work or not work; we would either have a full signal or have no signal. I am not an electrical engineer and I can't find the answer online so I'm reaching out to you. Can someone explain how a transmitter can slowly go bad? Common (incorrect, but repeated) answers from slashdot include: Back then your neighbors didn't have wifi, now they do. They drowning you out. I don't think this is likely because replacing the access point with a new one and using the same frequencies solves the problem. Older devices had low transmit power. Crank that baby. As mentioned by a FreeBSD wireless developer this violates regulations and can physically damage the equipment. It was also mentioned that higher power in one direction is not necessarily reciprocated. This shows higher bars, but not necessarily a better connection. Manufacturers make cheap crap designed to wear out. This one actually may be legitimate although it is overly broad. What specifically causes damage over time? Heat? Excessive power? So can anyone provide an informed answer on this? Is there any way to fix these older access points?

    Read the article

  • Configuring gmail for use on mailing lists

    - by reemrevnivek
    This is really two questions in one. First, are nettiquette guidelines still accurate in their restrictions on ASCII vs. HTML, posting style, and line length? (Here's a recent metafilter discussion of the topic.) Second, If they are not, should these guidelines be respected? If they are (or if they should still be respected), how can modern mail programs be configured to work properly with them? Most mailing list etiquette statements appear to have been written by sysadmins who loved their command lines, and refuse to change anything. Many still reference rfc1855, written in 1995. Just reading that paginated TXT should give you an idea of the climate at the time. Here's a short, fairly random list of mailing list etiquette statements with some extracted formatting guidelines: Mozilla - HTML discouraged, interleaved posting. FreeBSD - No HTML, don't top post, line length at 75 characters. Fedora - No HTML, bottom-post. You get the idea. You've all seen etiquette statements before. So, assuming that the rules should be obeyed (Usually a good idea), what can be done to allow me to still use a modern mail program, and exchange mail with friends who use the same programs? We like to format our mail. Bold headings, code snippets (sometimes syntax highlighted, if the copy-paste pulls RTF text as from XCOde and Eclipse), free line breaks determined by your browser width, and the (very) occasional image make the message easier to read. Threaded conversations are a wonderful thing. Broadband connections are, I'm sure, the rule for most of the users of SU and of developer mailing lists, disk space is cheap, and so the overhead of HTML is laughable. However, I don't want to post a question to a mailing list and have the guru who can answer my question automatically delete it, or come off as uncaring. Until I hear otherwise, I'll continue to respect the rules as best I can. For a common example of the problem, Gmail, by default, sends HTML formatted messages with bottom-posted quotes (which are folded in, just read the last message immediately above), and uses the frame width to wrap lines, rather than a character count. ASCII can be selected, and quotes can be moved and reversed, but line wraps of quotes don't work, line breaks are tedious to add (and more tedious to read, if they're super small in comparison to the width of the frame). Is there a forwarding, free mail program which can help with this exercise? Should an "RFC1855 mode" lab be written? Or do I have to go to the command line for my mailing lists, and gmail for my other mail?

    Read the article

  • High load on X3220 Quad Core Linux Apache server

    - by John Templar
    I'm seriously in need of help. My sites are now nearly impossible to use because of massive loads on my server. I'm already a month late on my mortgage and this really isn't helping my situation. I've been working on fixing this intermittent load problem for months (never this bad). I'm suspecting some kind of attack since I'm under DDOS attack a lot! I've been trying to figure out what is causing the load but I'm afraid I just don't have the experience or knowledge to understand all the data I've been looking at. I don't even know where to begin or how to test for the large array of attacks out there. Here's some data you might find useful... Server: Xeon X3220 Quad Core 2.4 GHz - Linux, FreeBSD 500 GB HD and 8 Gig of Ram. Runs Centos release 5.7 Server Version: Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_qos/9.74 Warning: All sites are softcore adult sites - mostly fantasy art like elves and amazons. 1) Sites may run fine for weeks or just days at less than 10 load then start jumping to 40-80 load - no idea why. Same sites, same mods, same amount of traffic - just WHAM! 2) I get an email almost every day that says: "Large Number of Failed Login Attempts from IP (different each time)". My webhost (who almost never helps me) told me it was a udp flood or something. 3) I've changed the port for MySQL from the default. If I ever put it back to the default - I get Loads of over 100 from what must be a constant mysql port flood. 4) I've reconfigured MYSQL. Link: http://www.deadlyamazons.com/logs/mycnf.txt 5) I have 3 Joomla Jomsocial networks. I've spent a couple weeks turning all the mods/plugins off, waiting a day and then turning them back on the next day or later if there isn't any change (there hasn't been). For example, on Thursday I'll turn off videos, on Friday I'll turn off chat.. etc and nothing changes the load appreciably. 6) Joomla info: All SEF turned off - sh404sef completely disabled and removed. Components: Joomla 1.5.22, Jomsocial 2.0.5, Kunena 1/31/2011, HWDMediashare 11/22/2010 and JBolo Chat 2.7.3, Comet Chat or Envolve Chat. Page Compression is on, Cache is on 15 mins. Please click on this forum to see links to all my reports: http://forum.joomla.org/viewtopic.php?f=433&t=706035&p=2777500#p2777500 Any help would be highly appreciated.

    Read the article

  • Problems with MGCP proxy creation

    - by Popof
    Hi, I'm trying to bypass my ISP router with my FreeBSD server (I've an optical connection so I've a RJ45 used to connect the box to WAN) Internet and TV are working fine (Using igmpproxy to forward TV stream) but I've a problem with phone. ISP's box is connected to the server which gives it a LAN address. The problem is that when the box builds MGCP packets (and especially SDP ones) it uses its LAN address. So I've think of writing an UDP proxy to handle MGCP and SDP packets in order to replace LAN address with server WAN address and then forward packet to WAN. Before starting coding I've captured stream packets using my server as a bridge between WAN connection and the ISP's box. And, in order to see if my solution is viable, I've tried to send those packets to the box using nemesis. I tried to send a packet (found in capture) containing an endpoint audit: AUEP 1447 aaln/[email protected] MGCP 1.0 F: A In the wireshark capture the box replied: 200 1447 OK A: a:PCMU;PCMA;G726-16;G726-24;G726-32;G726-40;G.723.1-5.3;G.723.1-6.3;G729;TELEPHONE-EVENT, fmtp:"TELEPHONE-EVENT 0-15,144,149,159", p:10-30, b:4-40, e:on, t:00, s:on, v:L;M;G;D, m:sendonly;recvonly;sendrecv;inactive;confrnce;replcate;netwtest;netwloop, dq-gi But when I use nemesis, I got an ICMP error: Port unreachable (Type 3, Code 3). To build this packet, WAN source address of the capture is replaced with my server LAN address, using the mgcp-callagent port (2727) and the packet is sent to the LAN address of the box at mgcp-gateway port (2427). The command I use is nemesis udp -S 192.168.2.1 -D 192.168.2.2 -x 2727 -y 2427 -P packet_to_send. I also tried an UDP scan to the box on callagent and gateway port: PORT STATE SERVICE 2727/udp open|filtered unknown 2427/udp closed unknown I found those results a little bit strange because it should be the 2427 port opened, as it was in capture. Internet Protocol, Src: <ISP MGCP Server>, Dst: <My WAN Address> User Datagram Protocol, Src Port: mgcp-callagent (2727), Dst Port: mgcp-gateway (2427) Does someone has any idea about how having my box responding to my requests ? Thanks in advance and sorry for my english.

    Read the article

  • SSTP client disconnects shortly after successfully connected to VPN

    - by Eran Betzalel
    I'm successfully authenticating and connecting to a SSTP VPN (on windows 2008) from my windows 7 machine, but for some reason, the connection is disconnected about a 1-2 seconds after it's established. I've done the following: Defined a SSTP VPN on my windows server 2008. Defined the same machine as CA. Issued the needed certificates and published them on the client. I'm currently testing this VPN inside my LAN so all the needed ports are opened. Here are the event log entries when trying to connect: Error Log (Client): The user HOME\User dialed a connection named Home VPN which has terminated. The reason code returned on termination is 829. Error Log (Server-VPN): The user HOME\User connected on port VPN0-0 on 7/27/2012 at 1:57 AM and disconnected on 7/27/2012 at 1:57 AM. The user was active for 0 minutes 0 seconds. 312 bytes were sent and 4528 bytes were received. The reason for disconnecting was user request. What would be the issue? How can I resolve or debug it? UPDATE: I've found an event log (Log=System, Source=RasSstp) message on the windows 7 machine that tries to connect to the VPN: The SSTP-based VPN connection to the remote access server was terminated because of a security check failure. Security settings on the remote access server do not match settings on this computer. Contact the system administrator of the remote access server and relay the following information: SHA1 Certificate Hash: 065D681...520375552F SHA256 Certificate Hash: 18DED363...EEEE28CFD00

    Read the article

  • Error installing TFS in Windows 8

    - by Davi Fiamenghi
    Trying to install TFS on my computer in order to make a demonstration. I can't figure out what else can I do to solve these errors: Information [ System Checks ] TF255142: Windows Firewall is not enabled. If you enable Windows Firewall after configuring Team Foundation Server, you must add exceptions for ports used by Team Foundation Server to Windows Firewall. Error [ Application Tier ] TF255120: Compatibility mode for Internet Information Services (IIS) 6.0 is not enabled. Team Foundation Server requires this on this operating system. Error [ Application Tier ] TF255456: You must configure Internet Information Services (IIS) to use the Static Content component. Team Foundation Server requires the Static Content component in IIS. Error [ Application Tier ] TF255397: Windows Authentication has not been configured as a role service in Internet Information Services (IIS). Team Foundation Server requires that Windows Authentication is installed as one of the role services in IIS. Error [ Application Tier ] TF255397: Windows Authentication has not been configured as a role service in Internet Information Services (IIS). Team Foundation Server requires that Windows Authentication is installed as one of the role services in IIS. Error [ Application Tier ] TF255397: Windows Authentication has not been configured as a role service in Internet Information Services (IIS). Team Foundation Server requires that Windows Authentication is installed as one of the role services in IIS. Here are my IIS features: (I installed and restarted the computer) Everything requested on the errors are installed, running on Windows 8 Consumer Preview Build 8250. IIS is working normally on http: //localhost:80 "Default Application" Please, Am I missing something?

    Read the article

  • Varnish 3.0.2 and ISPConfig 3.0.4

    - by Warren Bullock III
    I followed the tutorial The Perfect Server - Ubuntu 11.10 [ISPConfig 3] here. I'm running an Ubuntu 11.04 (Natty Narwhal) server with 1024 RAM on Rackspace. I've gone through and updated to ISPConfig 3.0.4. Everything has been working great up to now when I decided to try and install Varnish. Initially I did an install of Varnish by issuing: apt-get update apt-get upgrade apt-get install varnish Apparently the version that was installed was Varnish 2.x so I went back and added the repositories for packages provided by varnish-cache.org curl http://repo.varnish-cache.org/debian/GPG-key.txt | apt-key add - echo "deb http://repo.varnish-cache.org/ubuntu/ lucid varnish-3.0" >> /etc/apt/sources.list apt-get update apt-get install varnish This updated my version of Varnish to 3.0.2 I then proceeded to make the following changes: vim /etc/default/varnish change DAEMON_OPTS to port 80: vim /etc/apache2/ports.conf NameVirtualHost *:8000 Listen 8000 vim /etc/apache2/sites-available/default <VirtualHost *:8000> vim /etc/apache2/sites-available/ispconfig.vhost Listen 8080 NameVirtualHost *:8080 <VirtualHost _default_:8080> I then proceeded to set my other vhosts to use 8000 (the apache2 port) so with all this set I reset both Apache2 and Varnish to test. I used Firebug in Firefox 11.0 The output from what I see doesn't seem to indicate that Varnish is working completely correct: First of all I see: X-Varnish 1644834493 but I've heard that unless you have two timestamps side by side than it's probably not working correctly so for example I was thinking I might see something like: X-Varnish 1644834493 1644837493 Also if I noticed this in the output which seems to be inconstant: X-Drupal-Cache MISS There are times when it will say HIT as well.... So the question here that I have is I think Varnish is partially working, however, why don't I see two timestamps on X-Varnish like I'm thinking I should and does the output of the screenshot I have look correct? If Varnish isn't working can someone tell me what I might being doing wrong? Thanks in advance.

    Read the article

  • Smart Array P400 - Accelerator Replacement Battery Failure

    - by inflammable
    TL;DR - Is the immediate failure of a replacement battery, for a failed battery, on a battery backed accelerator for a Smart Array P400 controller a common occurrence? Or are we likely to have an storage controller with an impending and critical fault? We have a slightly confusing situation with a Smart Array P400 storage controller with the 512mb battery backed accelerator addon on an HP DL380 server. The storage controller is (afaik) running the latest firmware and driver: Model: Smart Array P400 Controller Status: OK Firmware Version: 7.24 Serial Number: *snip* Rebuild Priority: Medium Expand Priority: Medium Number Of Ports: 2 The storage diagnostic (both on the both boot-up screen for the controller and within the 'Management Homepage' and the 'HP Array Diagnostic Utility') recently starting showing the following status a fault for the battery for the accelerator: Accelerator Status: Temporarily Disabled Error Code: Cache Disabled Low Batteries Serial Number: *snip* Total Memory: 524288 KB Read Cache: 25% Write Cache: 75% Battery Status: Failed Read Errors: 0 Write Errors: 0 We replaced the battery with a new unit (a visual inspection of the P400 card showing nothing unusual) and saw the same fault - but expected this to disappear over the course of a few hours/days as it charged. This didn't happy, and the fault status remains the same as above. Given the battery is a genuine part from HP, I wouldn't have expected a replacement battery to fail straight away, or to be dead-on-arrival (is that naivety on my part?). Is the immediate failure of a replacement battery, for a failed battery, on a battery backed accelerator a common occurrence? Or are we likely to have an storage controller with an impending and critical fault? Is there any diagnostic that could tell me more about the failed battery, without cracking the server open again? Many thanks!

    Read the article

  • Configuring external SMTP server on Azure VM - messages staying in queue

    - by Steph Locke
    I have an external SMTP provider: auth.smtp.1and1.co.uk I am trying to send SQL Server Reporting Services emails via this on an Windows 2012 Azure VM. It is configured sufficiently correctly for emails to be generated, but I've not configured something or mis-configured something as the emails then stay in the queue. Setup details Configured SMTP Virtual Server General: IP Address: Fixed value Access: Access Control: Authentication: ticked Anonymous access Access: Connection Control: All except the list below (which is empty) Access: relay restrictions: Only the list below (which contains 127.0.0.1), ticked 'allow all..' option Delivery: Outbound Security...:Basic Authentication with username and password completed, ticked TLS encryption Delivery: Outbound connections...:TCP port=587 Delivery: Advanced: FQDN=ServerName, smarthost=auth.smtp.1and1.co.uk I then set the following SSRS rsreportserver.config values: <SMTPServer>100.92.192.3</SMTPServer> <SendUsing>2</SendUsing> <SMTPServerPickupDirectory> c:\inetpub\mailroot\pickup </SMTPServerPickupDirectory> <From>[email protected]</From> Tried so far 1) turning the smtp service off and on again (just in case) 2) run SMTPDiag with no errors (also no emails) 3) tried turning off the firewall for the ports (and more generally to see if it made a difference) 4) tried generation from powershell which resulted with message in queue 5) added 25 and 857 as endpoint 6) perused the event log and found some warnings that appear to be about the recipient Message delivery to the remote domain 'gmail.com' failed for the following reason: Unable to bind to the destination server in DNS. Message delivery to the host '212.227.15.179' failed while delivering to the remote domain 'gmail.com' for the following reason: The remote server did not respond to a connection attempt. 7) tried pinging but this appears to be blocked on azure 8) tried more powershell sending on different domains variants (localhost, boxname, internal ip used in smtp properties, 127.0.0.1) - none resulting in success 9) tried adding a remote domain - no change Could anyone recommend what step 10 should be in fixing this issue please?

    Read the article

  • Event ID: 861 - The Windows Firewall has detected an application listening for incoming traffic

    - by Chris Marisic
    Firstly, my machines aren't compromised any person suggesting such will be DV'd. The security logs on some of my networks client machines (all Windows Xp Sp3) get filled with these useless error messages. Security Failure Audit Detailed Tracking Event ID: 861 User: NT AUTHORITY\NETWORK SERVICE The Windows Firewall has detected an application listening for incoming traffic. Name: - Path: C:\WINDOWS\system32\svchost.exe Process identifier: 976 User account: NETWORK SERVICE User domain: NT AUTHORITY Service: Yes RPC server: No IP version: IPv4 IP protocol: UDP Port number: 55035 Allowed: No User notified: No It's always on various random ports of UDP so setting up a port exception isn't really an option. It's always from svchost or lsass both of which are running services from DLLs. One of the most offending processes seems to the be DnsCache. I have in my global policy under AT < Network < Network Connection < Widnows Firewall < Domain Profile (I haven't changed any standard profile options do both need configured? To allow remote administration and desktop exceptions and have a custom program exception list that has %SystemRoot%\system32\svchost.exe:*:enabled:svchost (Windows won't allow you to add this exception on a local machine but it let me have it on here in the global policy it just doesn't seem to do anything) %SystemRoot%\system32\lsass.exe:*enabled:lsass (I think this one ended all of my LSASS messages) %SystemRoot%\system32\dnsrslvr.dll:*:enabled:dnscache (I tried adding the dll itself to the exception list, this didn't seem to do anything) Is there really any other options left other than disabling the Windows Firewall entirely, disabling auditing entirely or just changing the event viewer to just auto overwrite when needed? I'd much rather fix the problem and get rid of these entries ever being created instead of just trying to cover up the problem.

    Read the article

  • blu-ray archiving in vmware ESXi 4

    - by spacecadet77
    Hi, I need some advice about using blu-ray writer for archiving data on vmware ESXi 4. At office we have IBM System x3400 Tower server with ESXi 4 hipervisor and OpenSuse and CentOS GNU/Linux system as guests. Will blu-ray writer work in this setup, and if it will is there any particular model you can suggest. Best regards IBM System x3400 Tower server specification: 1x Intel Quad-Core Xeon E5410 2.33GHz/ 12MB/ 1333MHz (2x CPU max) Intel 5000P chipset, 2x 1GB PC2-5300 DDR2 667MHz SDRAM ECC Chipkill (32GB max) 2x4GB (2x2GB) PC2-5300 CL5 ECC DDR2 FBDIMM (x3400, x3550, x3650) SAS/SATA Hot-Swap Open Bay (0xHDD std, 4xHDD max, 8xHDD optional) ServeRAID 8K dual channel SAS/SATA controller (RAID 0,1,1E,10,5,6, 256MB, Battery Backup) Graphics ATI® RN50(ES1000) 16MB DDR, CD-RW/DVD Combo no FDD GigaEthernet, Tower with Power Supply 835W (opt Redudant) Slot 1: half-length, PCI-Express x8(x4 electrical) Slot 2: full, PCI-Express x8 Slot 3: full, PCI-Express x8 Slot 4: full, 64-bit 133MHz 3.3v PCI-X Slot 5: full, 64-bit 133MHz 3.3v PCI-X , Slot 6: half-length, 32-bit 33MHz 5.0v PCI ports: 4x USB (Vers 2.0), 2x PS/2, parallel, 2x serial (9-pin), VGA, RJ-45 (ethernet ), RJ-45 (sys mgm) HDD 4 x TB 7200rpm / Serial ATA II 3.0Gb/s / 16MB, RoHS

    Read the article

  • Linux-Containers — Part 1: Overview

    - by Lenz Grimmer
    "Containers" by Jean-Pierre Martineau (CC BY-NC-SA 2.0). Linux Containers (LXC) provide a means to isolate individual services or applications as well as of a complete Linux operating system from other services running on the same host. To accomplish this, each container gets its own directory structure, network devices, IP addresses and process table. The processes running in other containers or the host system are not visible from inside a container. Additionally, Linux Containers allow for fine granular control of resources like RAM, CPU or disk I/O. Generally speaking, Linux Containers use a completely different approach than "classicial" virtualization technologies like KVM or Xen (on which Oracle VM Server for x86 is based on). An application running inside a container will be executed directly on the operating system kernel of the host system, shielded from all other running processes in a sandbox-like environment. This allows a very direct and fair distribution of CPU and I/O-resources. Linux containers can offer the best possible performance and several possibilities for managing and sharing the resources available. Similar to Containers (or Zones) on Oracle Solaris or FreeBSD jails, the same kernel version runs on the host as well as in the containers; it is not possible to run different Linux kernel versions or other operating systems like Microsoft Windows or Oracle Solaris for x86 inside a container. However, it is possible to run different Linux distribution versions (e.g. Fedora Linux in a container on top of an Oracle Linux host), provided it supports the version of the Linux kernel that runs on the host. This approach has one caveat, though - if any of the containers causes a kernel crash, it will bring down all other containers (and the host system) as well. For example, Oracle's Unbreakable Enterprise Kernel Release 2 (2.6.39) is supported for both Oracle Linux 5 and 6. This makes it possible to run Oracle Linux 5 and 6 container instances on top of an Oracle Linux 6 system. Since Linux Containers are fully implemented on the OS level (the Linux kernel), they can be easily combined with other virtualization technologies. It's certainly possible to set up Linux containers within a virtualized Linux instance that runs inside Oracle VM Server for Oracle VM Virtualbox. Some use cases for Linux Containers include: Consolidation of multiple separate Linux systems on one server: instances of Linux systems that are not performance-critical or only see sporadic use (e.g. a fax or print server or intranet services) do not necessarily need a dedicated server for their operations. These can easily be consolidated to run inside containers on a single server, to preserve energy and rack space. Running multiple instances of an application in parallel, e.g. for different users or customers. Each user receives his "own" application instance, with a defined level of service/performance. This prevents that one user's application could hog the entire system and ensures, that each user only has access to his own data set. It also helps to save main memory — if multiple instances of a same process are running, the Linux kernel can share memory pages that are identical and unchanged across all application instances. This also applies to shared libraries that applications may use, they are generally held in memory once and mapped to multiple processes. Quickly creating sandbox environments for development and testing purposes: containers that have been created and configured once can be archived as templates and can be duplicated (cloned) instantly on demand. After finishing the activity, the clone can safely be discarded. This allows to provide repeatable software builds and test environments, because the system will always be reset to its initial state for each run. Linux Containers also boot significantly faster than "classic" virtual machines, which can save a lot of time when running frequent build or test runs on applications. Safe execution of an individual application: if an application running inside a container has been compromised because of a security vulnerability, the host system and other containers remain unaffected. The potential damage can be minimized, analyzed and resolved directly from the host system. Note: Linux Containers on Oracle Linux 6 with the Unbreakable Enterprise Kernel Release 2 (2.6.39) are still marked as Technology Preview - their use is only recommended for testing and evaluation purposes. The Open-Source project "Linux Containers" (LXC) is driving the development of the technology behind this, which is based on the "Control Groups" (CGroups) and "Name Spaces" functionality of the Linux kernel. Oracle is actively involved in the Linux Containers development and contributes patches to the upstream LXC code base. Control Groups provide means to manage and monitor the allocation of resources for individual processes or process groups. Among other things, you can restrict the maximum amount of memory, CPU cycles as well as the disk and network throughput (in MB/s or IOP/s) that are available for an application. Name Spaces help to isolate process groups from each other, e.g. the visibility of other running processes or the exclusive access to a network device. It's also possible to restrict a process group's access and visibility of the entire file system hierarchy (similar to a classic "chroot" environment). CGroups and Name Spaces provide the foundation on which Linux containers are based on, but they can actually be used independently as well. A more detailed description of how Linux Containers can be created and managed on Oracle Linux will be explained in the second part of this article. Additional links related to Linux Containers: OTN Article: The Role of Oracle Solaris Zones and Linux Containers in a Virtualization Strategy Linux Containers on Wikipedia - Lenz Grimmer Follow me on: Personal Blog | Facebook | Twitter | Linux Blog |

    Read the article

  • NetBSD Networking

    - by Mike
    Hello, everyone! I have an old Toshiba Satellite 4015CDT, with Pentium II MMX, 32MB RAM, 4GB HDD. It also has one USB 1.0 port, parallel and serial ports, a 3.5" floppy drive and a CD-ROM drive (probably almost dead). I've installed NetBSD on this machine (full install) and now I want to connect it to the Internet. Although it has one PCMCIA modem card in it, it is obviously not an option. I've narrowed down my available options to the following: Connect a USB wireless adapter. I have a Realtek RTL8192 adapter, but although the system gives me the device's name (through dmesg) it fails to recognize it as a network adapter. Connect the laptop to another machine through a serial connection, so that the other machine will serve as a bridge to the Internet. Here is the page from the NetBSD documentation on serial connections. Unfortunately, I was not able to find anything on bridging there. I would very much appreciate your suggestions on the topic. Thanks in advance.

    Read the article

  • API numbers don't match on compiled PHP extension

    - by tixrus
    I'm trying to get GD into my PHP. I recently installed PHP5.3.0 on my system running Mac Leopard using mac ports. It did not come with the gd module. So I downloaded gd, compiled it as an extension module as per http://www.kenior.ch/macintosh/adding-gd-library-for-mac-os-x-leopard, made php.ini point to it, restarted apache etc. But no GD. So in apache error log it says PHP Warning: PHP Startup: gd: Unable to initialize module\nModule compiled with module API=20060613\nPHP compiled with module API=20090115\nThese options need to match\n in Unknown on line 0 So a bit of googling says I should not use the phpize I have before configuring and making these. I should use a new one called phpize5. I surely don't have any such thing. Unless its packed up inside something else in my php5.3. distro. Where do you get it. In Ubuntu I could just run sudo apt-get install php-dev, (apparently) and it would just appear by magic. At least that's what the webpage said. Unfortunately I am running MacOSX version Leopard. How can I build this GD module on Leopard so that it will match the API number in my PHP?

    Read the article

  • Having trouble redirecting frevvo using mod_proxy

    - by user38859
    This question is similar to this: http://serverfault.com/questions/102868/how-to-access-webservers-running-on-ports-blocked-on-companys-network Basically, I'm using confluence and a plugin called frevvo. Confluence sits on port 8080 while frevvo sits on port 8082. I want to redirect both of them to port 80 via Apache HTTP web server so that it doesn't get blocked by company proxies. I've been using the document on Atlassian that shows me how to run confluence behind Apache (I can't post a second URL due to being a newbie here) I've successfully redirected Confluence from port 8080 to port 80 so I can now access Confluence using www.example.com/confluence. Now I tried doing the same thing to frevvo with the following configurations: Apache httpd: ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /confluence http://localhost:8080/confluence ProxyPassReverse /confluence http://localhost:8080/confluence <Location /confluence> Order allow,deny Allow from all </Location> ProxyPass /frevvo http://localhost:8082/ ProxyPassReverse /frevvo http://localhost:8082/ <Location /forms> Order allow,deny Allow from all </Location> And in server.xml for the frevvo Tomcat instance, I added the following within <Host> tag: <Context path=" " docBase="" debug="0" reloadable="false"> <!-- Logger is deprecated in Tomcat 5.5. Logging configuration for Confluence is specified in confluence/WEB-INF/classes/log4j.properties --> <Manager pathname="" /> </Context> The plugin, frevvo, when accessed through the browser using http://localhost:8082 usually redirect to http://localhost:8082/frevvo/web With the above configuration, when accessing www.example.com.au/frevvo redirects to www.example.com/frevvo/web/static/login - which doesn't work. I hope the above details is clear and appreciate anyone who could give us some insight.

    Read the article

  • The boot selection failed because a required device is inaccessible 0xc000000e

    - by bbodenmiller
    A family member of mine recently went on vacation and turned off their computer, something they normally do not do, upon returning home it would not turn on and now returns the error message below. Generally friends and family come to me for help with computers and I have no problem, however this time I am a bit stumped. Any suggestions would be greatly appreciated. As you can see the error message is: Status: 0xc000000e Info: The best selection failed because a required device is inaccessible. Before going to this error message it briefly flashes the Windows loading screen. I have been able to confirm through the Windows RE Command Line and the dir command that the C: drive is accessible and likely is just suffering a bootup issue. I have tried: Launching the repair process discussed in the error message three times however each time it requires a restart and then returns to the same error message. Changing the boot order to be hard drive first Getting into safe mode; F8 just results in the same error message before I can get to the menu to select safe mode I have checked to make sure the BCD (bcdedit, Boot Configuration Data) is still intact as per https://www.symantec.com/business/support/index?page=content&id=TECH160475 I plan to try (but would like additional comments on): sfc /scannow; requires a restart and thus will likely result in the error message again A memory scan Bootrec as per http://support.microsoft.com/kb/927392#method1 Swapping IDE cables/ports Resetting the BIOS I noticed others with similar issues around the web are dual-booting however this machine is not setup in a dual-boot environment. Additionally at one point this error message supposedly showed up before I started working on the computer: The instruction at 0xfbe2584d referenced memory at 0x00000008. The memory could not be read. As previously stated any additional suggestions or words of advice would be greatly apprecaited.

    Read the article

  • PHP-FPM and APC for shared hosting?

    - by Tiffany Walker
    We are looking into finding a way to get APC to only create one cache per account / site. This can be done with Fastcgi (last update 2006…) but with Fastcgid APC will have to create multiple caches for multiple processes run by the same account. To get around this problem, we have been looking into PHP-FPM PHP process manager allows multiple PHP processes to share a single APC cache. But from what I have read (I hope I'm wrong) , even if you create a pool per process, all sites accross all pools will share the same APC cache. This brings us back to the same problem as with shared Memcached: it's not secure ! On php-fpm's site I read that you can chroot php-fpm pools and define a specific UID and GID per pool… if this is the case then shouldn't APC have to use this user and not have access to other pools cache ? An article here (in 2011) suggests that you would need to run one process per pool creating multiple launchers on different ports and different config files with one pool per config file : http://groups.drupal.org/node/198168 Is this still neceessary ? If so what would be the impact of running say 800 processes of php-fpm ? Would it be mainly memory ? If so how can I work out what the memory impact would be ? I guess that it would be better to run 800 times php-fpm then to have accounts creating multiple APC caches for a single site ? If on average an account creates a 50MB cache and creates 3 caches per account that makes 150Mb per account which makes 120GB… However if each account uses on average only 50Mb that would make 40GB We will have at least 128GB of ram on our next server so 40GB is acceptable if running 800 x PHP-FPM does not create an overhead of more than 20GB ! What do you think is PHP-FPM the best way to go to provide secure APC cache on shared hosting with a server that has a decent amount of memory ? Or should I be looking at another system ? Thanks !

    Read the article

  • Iomega eGo Encrypt Plus Encrypted Partition not mounting properly says "local disk"

    - by mosiac
    I'm working with an Iomega eGo 500gb Encrypt Plus portable drive. When I first set it up and installed the software and set a user password everything worked fine. The partition labeled "IomegaHDD" mounted properly and I could access the free space. Then I changed the ADMIN password which required me to lockout the device, wait 60 seconds, and then login to the Admin section and change the password, lockout the device again, wait 60 seconds, and then log back in with my user password. When I did that it of course unmounted the IomegaHDD partition to secure it, when it remounts it, it only shows up as "local disk" now and will not remount properly. I had not removed the cable while doing any of this. I have since tried unplugging and plugging back in to login to the drove but that has not worked. I'm wondering if I should remove every instance of "generic usb hub" from device manager and wait for it to re-add itself, or move it to a new set of USB ports temporarily to seee if that helps. Any ideas?

    Read the article

  • "Could not claim interface on camera: -6" when trying to connect usb camera (Kinect)

    - by rzetterberg
    I have installed the freenect library from openkinect.org. With that library there is a demo application which you can run from the terminal to test out the Kinect. However when I run this command I get the following output: richard@behemoth:~$ sudo freenect-glview Kinect camera test Number of devices found: 1 Could not claim interface on camera: -6 Could not open device This particular error is thrown by the library libusb by the function libusb_claim_interface and the error -6 corresponds to the LIBUSB_ERROR_BUSY. So my guess is that it has something to do with mounting the usb, rather than specifically the freenect library or the Kinect itself. So my question is how can I find out what resource is using this interface and how can I free it so that I can access it? Edit: What I have tried so far (just to be sure): Rebooted Plugged-out, plugged-in Tried different usb ports Restarted udev Additional information that might be useful: /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=1c73f217-ac8d-451b-8390-7a680628a856 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=bb49bd29-07ec-45a0-bbab-46fb8362b06b none swap sw 0 0 sudo uname -r: Linux behemoth 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10"

    Read the article

  • Windows XP SP3 Keyboard stops working

    - by Kevin K
    Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windoze at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

    Read the article

  • Audio Static/Interference regardless of audio interface?

    - by Tom
    I currently am running a media center/server on a Lubuntu machine. The machine specs: Core 2 Duo Extreme EVGA SLI 680i MotherBoard 2 GB DDR2 Ram 3 Hard Drives no raid - WD Caviar Black, Green, and Samsung Spinpoint Galaxy GTX 220 1GB External USB Creative XI-FI Extreme Card 550W Power Supply This machine is hooked up through an optical cable to an ONKYO HTR340 Receiver through the XIFI card. Whenever I play any audio regardless if it is through XBMC, the default audio player, a flash video, etc, I get a horrible static sound that randomly gets louder. Here is a video of the sound: http://www.youtube.com/watch?v=SqKQkxYRVA4 This static comes in randomly, sometimes going away for short periods, but eventually always comes back. So far I have tried everything I could think of: Reinstalling OS Installing/upgrading/repairing PulseAudio/Alsa Installing alternate OSes, straight Ubuntu, Lubuntu, Xubuntu, Arch, Mint, Windows 7 Switching audio from the external card to internal Optical, audio out through HDMI, audio out through headphones Different ports on receiver (my main desktop sounds fine on the same sound system) Different optical cables Unplugging everything unnecessary from the motherboard (1 HD, 1 Stick of Ram, 1 Keyboard) Swapping out ram Swapping out the motherboard Replacing the Graphics Card (was replaced due to fan being noisy, not specifically for this problem) Different harddrives Swapping power supply Disabling onboard audio Pretty much everything short of swapping the CPU. I haven't been able to narrow down the problem and it is getting frustrating. Is it possible that the CPU is faulty and might cause a problem such as this, or that the PC case is shorting out the motherboard? Any kind of suggestions will be appreciated.

    Read the article

  • How to construct SELinux rules for a Glassfish server

    - by tronda
    I'm running Glassfish 3.1 on a CentOS 6 solution and by default SELinux is enabled. I have installed Sun's JDK version 1.6.0_29 on the server and extracted the Glassfish 3.1.1 to /opt/glassfish-3.1.1 with a link /opt/glassfish pointing to the latest Glassfish version. I've also created a system user named glassfish with a home directory /home/glassfish. When running with SELinux enabled I get all sorts of errors. For instance I'm not able to create the domain. I kind of like the concept of SELinux, and would like to be able to have SELinux enabled. I have the following requirements for the Glassfish server: Listening to port 8080 and 8081 Other ports 7676: JMS 8686: JMX monitoring, 4848: Admin console Forwarding from apache to Glassfish through mod_jk and port 8009 Starting OpenMQ as an separate process which listens to 7676 and it's JMX monitoring port 7776 Able to read and write files at a specified area (different from home directory) Able to use /tmp/ for temporary files I am aware of the audit2allow tool when running in permissive mode, but I struggle with understanding the rules that is generated from this tool, and thought that setting up these rule manually the first time would help me understand the SELinux rules better than the simplistic examples that I've seen so far. Can someone with SELinux experience help me form these SELinux rules with comments describing each part of the rules?

    Read the article

  • Squid configuration for proxy server

    - by Ian Rob
    I have a server with 10 ip's that I want to give access to some friends via authentication but I'm stuck on squid's config file. Let's say I have these ip's available on my server: 212.77.23.10 212.77.1.10 68.44.82.112 And I want to allocate each one of them to a different user like so: 212.77.23.10 goes to user manilodisan using password 123456 212.77.1.10 goes to user manilodisan1 using password 123456 68.44.82.112 goes to user manilodisan2 using password 123456 I managed to add the passwords and authentication works ok but how do I do to restrict one user to one of the available ip's? I have a basic setup from different bits I found over the internet but nothing seems to work. Here's my squid.conf (all comments are removed to make it lighter): acl ip1 myip 212.77.23.10 acl ip2 myip 212.77.1.10 tcp_outgoing_address 212.77.23.10 ip1 tcp_outgoing_address 212.77.1.10 ip2 http_port 8888 visible_hostname weezie auth_param basic program /usr/lib/squid/ncsa_auth /etc/squid/squid-passwd acl ncsa_users proxy_auth REQUIRED http_access allow ncsa_users acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 # https acl SSL_ports port 563 # snews acl SSL_ports port 873 # rsync acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl Safe_ports port 631 # cups acl Safe_ports port 873 # rsync acl Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access allow purge localhost http_access deny purge http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access deny all icp_access allow all hierarchy_stoplist cgi-bin ? access_log /var/log/squid/access.log squid acl QUERY urlpath_regex cgi-bin \? cache deny QUERY refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl apache rep_header Server ^Apache broken_vary_encoding allow apache extension_methods REPORT MERGE MKACTIVITY CHECKOUT hosts_file /etc/hosts forwarded_for off coredump_dir /var/spool/squid

    Read the article

  • iptables -P FORWARD DROP makes port forwarding slow

    - by Isaac
    I have three computers, linked like this: box1 (ubuntu) box2 router & gateway (debian) box3 (opensuse) [10.0.1.1] ---- [10.0.1.18,10.0.2.18,10.0.3.18] ---- [10.0.3.15] | box4, www [10.0.2.1] Among other things I want box2 to do nat and port forwarding, so that I can do ssh -p 2223 box2 to reach box3. For this I have the following iptables script: #!/bin/bash # flush iptables -F INPUT iptables -F FORWARD iptables -F OUTPUT iptables -t nat -F PREROUTING iptables -t nat -F POSTROUTING iptables -t nat -F OUTPUT # default default_action=DROP for chain in INPUT OUTPUT;do iptables -P $chain $default_action done iptables -P FORWARD DROP # allow ssh to local computer allowed_ssh_clients="10.0.1.1 10.0.3.15" for ip in $allowed_ssh_clients;do iptables -A OUTPUT -p tcp --sport 22 -d $ip -j ACCEPT iptables -A INPUT -p tcp --dport 22 -s $ip -j ACCEPT done # allow DNS iptables -A OUTPUT -p udp --dport 53 -m state \ --state NEW,ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p udp --sport 53 -m state \ --state ESTABLISHED,RELATED -j ACCEPT # allow HTTP & HTTPS iptables -A OUTPUT -p tcp -m multiport --dports 80,443 -j ACCEPT iptables -A INPUT -p tcp -m multiport --sports 80,443 -j ACCEPT # # ROUTING # # allow routing echo 1 >/proc/sys/net/ipv4/ip_forward # nat iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # http iptables -A FORWARD -p tcp --dport 80 -j ACCEPT iptables -A FORWARD -p tcp --sport 80 -j ACCEPT # ssh redirect iptables -t nat -A PREROUTING -p tcp -i eth1 --dport 2223 -j DNAT \ --to-destination 10.0.3.15:22 iptables -A FORWARD -p tcp --sport 22 -j ACCEPT iptables -A FORWARD -p tcp --dport 22 -j ACCEPT iptables -A FORWARD -p tcp --sport 1024:65535 -j ACCEPT iptables -A FORWARD -p tcp --dport 1024:65535 -j ACCEPT iptables -I FORWARD -j LOG --log-prefix "iptables denied: " While this works, it takes about 10 seconds to get a password promt from my ssh command. Afterwards, the connection is as responsive as could be. If I change the default policy for my FORWARD chain to "ACCEPT", then the password promt is there imediatly. I have tried analysing the logs, but I can not spot a difference in the logs for ACCEPT/DROP in my FORWARD chain. Also I have tried allowing all the unprivileged ports, as box1 uses thoses for doing ssh to box2. Any hints? (If the whole setup seems strange to you - the point of the exercise is to understand iptables ;))

    Read the article

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >