Search Results

Search found 3935 results on 158 pages for 'garreth 00'.

Page 99/158 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

  • Lubuntu 12.04 PPC slow startup and shutdown

    - by Carlo Bertuccini
    I've installed Lubuntu 12.04 on a Powerbook G4 (PowerPC 1GHz, 1 gb ram, Geforce MX 440). Everything works perfectly except the startup and shutdown. To startup my system I have to wait about 3 minutes (and similar time to shutdown) Giving a look @ /var/log/dmesg I noticed the following [drm] nouveau 0000:00:10.0: Detected an NV10 generation card (0x017900a5) checking generic (b8004000 151800) vs hw (b8000000 80000000) fb: conflicting fb hw usage nouveaufb vs 0Ffb NVDA,Displ - removing generic driver The only issue concerns Nouveau ... inside my /var/log/kern.log says what follows BUG: soft lockup - CPU#0 stuck for 22s! I've booted passing the "nouveau.modeset=0" parameter and the system boot in 15 seconds but with 4 bit graphics -- Any idea how to fix? Thanks in advance for any help

    Read the article

  • HP EliteBook 8440p screen flickers after blank screen (nvidia)

    - by fliegenderfrosch
    When my screen turns blank after 10 min or after locking the screen and I begin using the laptop again, the screen is flickering. It looks as if every second line of pixels is blinking and the flickering is mainly present in the upper part of the screen. I am using Ubuntu 12.04 with the latest binary Nvidia drivers (current-updates). lshw | grep VGA tells me: 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [NVS 3100M] (rev a2) The problem doesn’t occur after sleeping or on an external display. I used Kubuntu 11.10 before, where the problem didn’t occur either. Is there anything I can do except waiting for new drivers?

    Read the article

  • Patrick Curran Session-Keynote at DOAG 2012

    - by Heather VanCura
    Patrick Curran, Chair of the  Java Community Process (JCP) and Director of the JCP Program Management Office, will be speaking this week at the DOAG 2012 event in Nuremberg Germany. Keynote Java: Restructuring the Java Community ProcessNovember, 22nd | 09:00-09:45 am The Java Community Process (JCP) plays a critical role in the evolution of Java.  This keynote will explain how the JCP is organized and how interested members of the Java community - commercial organizations, non-profits, Java user-groups, and individual developers - work together to advance the Java language and platforms. It will then discuss recent and upcoming changes to the JCP's structure and operating processes, and will explain how these changes ('JCP.next') will make the organization more efficient and will ensure that its work is carried out in a more open and more transparent manner.

    Read the article

  • how can i bridge my LAN port to batman-adv?

    - by rubo77
    On Ubuntu 12.04 I have my Laptop connected to and part of a batman network. So my Laptop is meshing with the net. The script I used is this How can I install a bridge, that will allow another host laptop to get internet through my Laptop? I tried this: service network-manager stop batctl if add eth0 apt-get install bridge-utils I added this in /etc/network/interfaces auto br0 iface br0 inet static address 10.116.123.123 bridge_ports eth0 bridge_fd 5 bridge_stp no then ifconfig sais br0 Link encap:Ethernet Hardware Adresse 00:a0:d1:a9:db:da rubo78: inet Adresse:10.116.123.123 Bcast:0.0.0.0 Maske:255.255.255.255 bat0 Link encap:Ethernet Hardware Adresse 6e:8a:8f:f2:82:e3 inet Adresse:10.116.2.250 Bcast:10.116.255.255 Maske:255.255.0.0 ifup br0 batctl if eth0: active wlan0: active but I get no network on the host

    Read the article

  • Monitoring Events in your BPEL Runtime - RSS Feeds?

    - by Ramkumar Menon
    @10g - It had been a while since I'd tried something different. so here's what I did this week!Whenever our Developers deployed processes to the BPEL runtime, or perhaps when a process gets turned off due to connectivity issues, or maybe someone retired a process, I needed to know. So here's what I did. Step 1: Downloaded Quartz libraries and went through the documentation to understand what it takes to schedule a recurring job. Step 2: Cranked out two components using Oracle JDeveloper. [Within a new Web Project] a) A simple Java Class named FeedUpdater that extends org.quartz.Job. All this class does is to connect to your BPEL Runtime [via opmn:ormi] and fetch all events that occured in the last "n" minutes. events? - If it doesn't ring a bell - its right there on the BPEL Console. If you click on "Administration > Process Log" - what you see are events.The API to retrieve the events is //get the locator reference for the domain you are interested in.Locator l = .... //Predicate to retrieve events for last "n" minutesWhereCondition wc = new WhereCondition(...) //get all those events you needed.BPELProcessEvent[] events = l.listProcessEvents(wc); After you get all these events, write out these into an RSS Feed XML structure and stream it into a file that resides either in your Apache htdocs, or wherever it can be accessed via HTTP.You can read all about RSS 2.0 here. At a high level, here is how it looks like. <?xml version = '1.0' encoding = 'UTF-8'?><rss version="2.0">  <channel>    <title>Live Updates from the Development Environment</title>    <link>http://soadev.myserver.com/feeds/</link>    <description>Live Updates from the Development Environment</description>    <lastBuildDate>Fri, 19 Nov 2010 01:03:00 PST</lastBuildDate>    <language>en-us</language>    <ttl>1</ttl>    <item>      <guid>1290213724692</guid>      <title>Process compiled</title>      <link>http://soadev.myserver.com/BPELConsole/mdm_product/administration.jsp?mode=processLog&amp;processName=&amp;dn=all&amp;eventType=all&amp;eventDate=600&amp;Filter=++Filter++</link>      <pubDate>Fri Nov 19 00:00:37 PST 2010</pubDate>      <description>SendPurchaseOrderRequestService: 3.0 Time : Fri Nov 19 00:00:37                   PST 2010</description>    </item>   ...... </channel> </rss> For writing ut XML content, read through Oracle XML Parser APIs - [search around for oracle.xml.parser.v2] b) Now that my "Job" was done, my job was half done. Next, I wrote up a simple Scheduler Servlet that schedules the above "Job" class to be executed ever "n" minutes. It is very straight forward. Here is the primary section of the code.           try {        Scheduler sched = StdSchedulerFactory.getDefaultScheduler();         //get n and make a trigger that executes every "n" seconds        Trigger trigger = TriggerUtils.makeSecondlyTrigger(n);        trigger.setName("feedTrigger" + System.currentTimeMillis());        trigger.setGroup("feedGroup");                JobDetail job = new JobDetail("SOA_Feed" + System.currentTimeMillis(), "feedGroup", FeedUpdater.class);        sched.scheduleJob(job,trigger);         }catch(Exception ex) {            ex.printStackTrace();            throw new ServletException(ex.getMessage());        } Look up the Quartz API and documentation. It will make this look much simpler.   Now that both components were ready, I packaged the Application into a war file and deployed it onto my Application Server. When the servlet initialized, the "n" second schedule was set/initialized. From then on, the servlet kept populating the RSS Feed file. I just ensured that my "Job" code keeps only 30 latest events within it, so that the feed file is small and under control. [a few kbs]   Next I opened up the feed xml on my browser - It requested a subscription - and Here I was - watching new deployments/life cycle events all popping up on my browser toolbar every 5 (actually n)  minutes!   Well, you could do it on a browser/reader of your choice - or perhaps read them like you read an email on your thunderbird!.      

    Read the article

  • Chrome Apps + Native Client

    Chrome Apps + Native Client Did you know that you can use Native Client inside a Chrome App? Join +John Mccutchan and +Pete LePage as they introduce Native Client Acceleration Modules (NaCl AM) which expose C++ libraries to JavaScript programs. NaCl AMs can, be used for bulk data processing (compression, encryption) but they also work well in interactive applications that require low latency. We'll explain how to build a NaCl Acceleration Module and demo a Bullet Physics engine running inside a Chrome App with a NaCl AM interacting with an HTML and JavaScript UI using three.js. We'll be live on Tuesday December 11th at at 9am PT, showing you code, samples and answering your questions. From: GoogleDevelopers Views: 0 0 ratings Time: 45:00 More in Science & Technology

    Read the article

  • Nvidia G96 [GeForce 9400 GT] and application graphic issues

    - by Fabio
    I've got a quite old NVIDIA graphic card and I with installed restricted drivers from Settings panel (as also shown in this thread). ? ~ lspci 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9400 GT] (rev a1) I tried a lot of them: version 173-update, current, beta, but the only one that can run unity-2d it's current-update. That's Ubuntu 12.04.1 LTS 64bit. However... Unity crashes, sometimes windows border disappear, Java Virtual Machine doesn't works, font rendering it's slow and so on. How can I solve this? Some suggestions? Thanks!

    Read the article

  • My Dijit DateTimeCombo widget doesn't send selected value on form submission

    - by david bessire
    i need to create a Dojo widget that lets users specify date & time. i found a sample implementation attached to an entry in the Dojo bug tracker. It looks nice and mostly works, but when i submit the form, the value sent by the client is not the user-selected value but the value sent from the server. What changes do i need to make to get the widget to submit the date & time value? Sample usage is to render a JSP with basic HTML tags (form & input), then dojo.addOnLoad a function which selects the basic elements by ID, adds dojoType attribute, and dojo.parser.parse()-es the page. Thanks in advance. The widget is implemented in two files. The application uses Dojo 1.3. File 1: DateTimeCombo.js dojo.provide("dojox.form.DateTimeCombo"); dojo.require("dojox.form._DateTimeCombo"); dojo.require("dijit.form._DateTimeTextBox"); dojo.declare( "dojox.form.DateTimeCombo", dijit.form._DateTimeTextBox, { baseClass: "dojoxformDateTimeCombo dijitTextBox", popupClass: "dojox.form._DateTimeCombo", pickerPostOpen: "pickerPostOpen_fn", _selector: 'date', constructor: function (argv) {}, postMixInProperties: function() { dojo.mixin(this.constraints, { /* datePattern: 'MM/dd/yyyy HH:mm:ss', timePattern: 'HH:mm:ss', */ datePattern: 'MM/dd/yyyy HH:mm', timePattern: 'HH:mm', clickableIncrement:'T00:15:00', visibleIncrement:'T00:15:00', visibleRange:'T01:00:00' }); this.inherited(arguments); }, _open: function () { this.inherited(arguments); if (this._picker!==null && (this.pickerPostOpen!==null && this.pickerPostOpen!=="")) { if (this._picker.pickerPostOpen_fn!==null) { this._picker.pickerPostOpen_fn(this); } } } } ); File 2: _DateTimeCombo.js dojo.provide("dojox.form._DateTimeCombo"); dojo.require("dojo.date.stamp"); dojo.require("dijit._Widget"); dojo.require("dijit._Templated"); dojo.require("dijit._Calendar"); dojo.require("dijit.form.TimeTextBox"); dojo.require("dijit.form.Button"); dojo.declare("dojox.form._DateTimeCombo", [dijit._Widget, dijit._Templated], { // invoked only if time picker is empty defaultTime: function () { var res= new Date(); res.setHours(0,0,0); return res; }, // id of this table below is the same as this.id templateString: " <table class=\"dojoxDateTimeCombo\" waiRole=\"presentation\">\ <tr class=\"dojoxTDComboCalendarContainer\">\ <td>\ <center><input dojoAttachPoint=\"calendar\" dojoType=\"dijit._Calendar\"></input></center>\ </td>\ </tr>\ <tr class=\"dojoxTDComboTimeTextBoxContainer\">\ <td>\ <center><input dojoAttachPoint=\"timePicker\" dojoType=\"dijit.form.TimeTextBox\"></input></center>\ </td>\ </tr>\ <tr><td><center><button dojoAttachPoint=\"ctButton\" dojoType=\"dijit.form.Button\">Ok</button></center></td></tr>\ </table>\ ", widgetsInTemplate: true, constructor: function(arg) {}, postMixInProperties: function() { this.inherited(arguments); }, postCreate: function() { this.inherited(arguments); this.connect(this.ctButton, "onClick", "_onValueSelected"); }, // initialize pickers to calendar value pickerPostOpen_fn: function (parent_inst) { var parent_value = parent_inst.attr('value'); if (parent_value !== null) { this.setValue(parent_value); } }, // expects a valid date object setValue: function(value) { if (value!==null) { this.calendar.attr('value', value); this.timePicker.attr('value', value); } }, // return a Date constructed date in calendar & time in time picker. getValue: function() { var value = this.calendar.attr('value'); var result=value; if (this.timePicker.value !== null) { if ((this.timePicker.value instanceof Date) === true) { result.setHours(this.timePicker.value.getHours(), this.timePicker.value.getMinutes(), this.timePicker.value.getSeconds()); return result; } } else { var defTime=this.defaultTime(); result.setHours(defTime.getHours(), defTime.getMinutes(), defTime.getSeconds()); return result; } }, _onValueSelected: function() { var value = this.getValue(); this.onValueSelected(value); }, onValueSelected: function(value) {} });

    Read the article

  • Cannot control the fan on a Sony Vaio laptop

    - by Xobb
    I've got Sony Vaio laptop and my fan is on all the time, though the temperature on the video-adapter is always over 60°?. As I've googled, vaiofand does not support VPC-EA series. Is there anything I can do with that or I need another laptop? I'm using the following graphics card: 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] though the problem is not with the graphics card. I've mentioned its temperature as the highest (64°C now btw). Seems like the notebook is always overheated and I cannot control the fan speed to make it cooler. And yes, I'm using the proprietary driver ATI/AMD FGLRX graphics driver. I'm using Kubuntu 11.04.

    Read the article

  • Getting a TV Capture Card working

    - by Benny Hallett
    I'm new to Linux, and am trying to get my Capture Card working on 11.04. The only command that I know to run to find out any information is lspci, which tells me that I have 02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) I've looked at using Me TV, but haven't worked out how to configure it for my card, or what I need to do to get it running. I'm not fussed on what software I use to run the Capture Card, but I've currently got only Me TV installed. Edit: When I run tvtime, I get the following errors: videoinput: Cannot open capture device /dev/video0: No such file or directory mixer: find error: Success mixer: Can't open mixer default, mixer volume and mute unavailable. mixer: Can't open device default/Line, mixer volume and mute unavailable. Segmentation fault

    Read the article

  • HD flash video lagging on LG R400

    - by dhojgaard
    I'm installing Ubuntu on my friends laptop. An LG R400 with ATI Mobility Radeon X2300 graphics drivers. On Windows Vista which runs pretty slow the HD flash videos 1080p on Youtube vimeo and other places work with no problems, but on Ubuntu i can not really play videos above 480p Above that they are lagging. That annoys me because i know he will use them, and how am i supposed to convince him that Ubuntu is the way to go if it can not play the videos that windows vista can? Unity 3d is working fine so i think the graphics drivers is working, and when i download the hd videos and play as mp4 in vlc they also work fine. lspci -nn | grep VGA shows the following: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Mobility Radeon X2300 Hope that someone can help me convince my friend that Ubuntu is rocking!

    Read the article

  • WebCast: WebCenter Portal, April 03rd, 2012

    - by rituchhibber
    Our next WebCenter Portal webcast will be on April 03rd, 2012. This WebCast will help you to prepare yourself for the WebCenter Portal Certified Implementation Specialist EXAM. Webcast Details: Date Topic Speaker Web Call Details Intercall Details  April 03rd                WebCenter Portal   Refresh     Course      Yannick Ongena, InfoMentumWebCenter Portal Specialized Partner    Join Webcast Dial-in numbers:CC/SP: 1579222/9221 Time: 12:00 -15:00 CET Break around 13:30 Conference ID/Key: 9729232/0304 For more details, please click here.

    Read the article

  • Intel graphics Ubuntu 12.04.3 LTS: does not detect second monitor

    - by user206551
    I have some problems to get the second monitor working on my Ubuntu 12.04.3 LTS. If I click on the detect button it does not work. Info about my system: $uname -a Linux LabTop2 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux $cat /etc/*-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.3 LTS" NAME="Ubuntu" VERSION="12.04.3 LTS, Precise Pangolin" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu precise (12.04.3 LTS)" VERSION_ID="12.04" $lspci |grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) $lsmod | grep video uvcvideo 72250 0 videobuf2_core 39385 1 uvcvideo videodev 96131 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12920 1 uvcvideo videobuf2_memops 13042 1 videobuf2_vmalloc video 19116 1 i915 $xrandr -q xrandr: Failed to get size of gamma for output default Screen 0: minimum 1366 x 768, current 1368 x 768, maximum 1368 x 768 default connected 1368x768+0+0 0mm x 0mm 1366x768 0.0 1368x768 0.0* Before upgrading the system, xrand -q showed my much more resolution options and the other monitor. I have tried to install intel-linux-graphics-installer but this version of ubuntu is not supported Any help will be apreciated!!

    Read the article

  • Blank screen after installing nvidia restricted driver

    - by LaMinifalda
    I have a new machine with a MSI N560GTX Ti Twin Frozr II/OC graphic card and MSI PH67A-C43 (B3) main board. If i install the current nvidia restricted driver and reboot the machine on Natty (64-bit), then i only get a black screen after reboot and my system does not respond. I can´t see the login screen. On nvidia web page i saw that the current driver is 270.41.06. Is that driver used as current driver? Btw, i am an ubuntu/linux beginner and therefore not very familiar with ubuntu. What can i do to solve the black screen problem? EDIT: Setting the nomodeset parameter does not solve the problem. After ubuntu start, first i see the ubuntu logo, then strange pixels and at the end the black screen. HELP! EDIT2: Thank you, but setting the "video=vesa:off gfxpayload=text" parameters do no solve the problem too. Same result as in last edit. HELP. I would like to see Unity. This is my grub: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="video=vesa:off gfxpayload=text nomodeset quiet splash" GRUB_CMDLINE_LINUX=" vga=794" EDIT3: I dont know if it is important. If this edit is unnecessary and helpless I will delete it. There are some log files (Xorg.0.log - Xorg.4.log). I dont know how these log files relate to each other. Please, check the errors listed below. In Xorg.1.log I see the following error: [ 20.603] (EE) Failed to initialize GLX extension (ComIatible NVIDIA X driver not found) In Xorg.2.log I see the following error: [ 25.971] (II) Loading /usr/lib/xorg/modules/libfb.so [ 25.971] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 25.971] (==) NVIDIA(0): RGB weight 888 [ 25.971] (==) NVIDIA(0): Default visual is TrueColor [ 25.971] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 26.077] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [ 26.078] (EE) NVIDIA(0): check your system's kernel log for additional error [ 26.078] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the [ 26.078] (EE) NVIDIA(0): README for additional information. [ 26.078] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device! [ 26.078] (II) UnloadModule: "nvidia" [ 26.078] (II) Unloading nvidia [ 26.078] (II) UnloadModule: "wfb" [ 26.078] (II) Unloading wfb [ 26.078] (II) UnloadModule: "fb" [ 26.078] (II) Unloading fb [ 26.078] (EE) Screen(s) found, but none have a usable configuration. [ 26.078] Fatal server error: [ 26.078] no screens found [ 26.078] Please consult the The X.Org Found [...] In Xorg.4.log I see the following errors: [ 15.437] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 15.437] (==) NVIDIA(0): RGB weight 888 [ 15.437] (==) NVIDIA(0): Default visual is TrueColor [ 15.437] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 15.703] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0) [ 15.703] (--) NVIDIA(0): Memory: 1048576 kBytes [ 15.703] (--) NVIDIA(0): VideoBIOS: 70.24.11.00.00 [ 15.703] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 15.703] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 15.703] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 560 Ti at [ 15.703] (--) NVIDIA(0): PCI:1:0:0 [ 15.703] (--) NVIDIA(0): none [ 15.706] (EE) NVIDIA(0): No display devices found for this X screen. [ 15.943] (II) UnloadModule: "nvidia" [ 15.943] (II) Unloading nvidia [ 15.943] (II) UnloadModule: "wfb" [ 15.943] (II) Unloading wfb [ 15.943] (II) UnloadModule: "fb" [ 15.943] (II) Unloading fb [ 15.943] (EE) Screen(s) found, but none have a usable configuration. [ 15.943] Fatal server error: [ 15.943] no screens found EDIT4 There was a file /etc/X11/xorg.conf. As fossfreedom suggested I executed sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup However, there is still the black screen after reboot. EDIT5 Neutro's advice (reinstalling the headers) did not solve the problem, too. :-( Any further help is appreciated! EDIT6 I just installed driver 173.xxx. After reboot the system shows me only "Checking battery state". Just for information. I will google the problem, but help is also appreciated! ;-) EDIT7 When using the free driver (Ubuntu says that the free driver is in use and activated), Xorg.0.log shows the following errors: [ 9.267] (II) LoadModule: "nouveau" [ 9.267] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 9.267] (II) Module nouveau: vendor="X.Org Foundation" [ 9.267] compiled for 1.10.0, module version = 0.0.16 [ 9.267] Module class: X.Org Video Driver [ 9.267] ABI class: X.Org Video Driver, version 10.0 [ 9.267] (II) LoadModule: "nv" [ 9.267] (WW) Warning, couldn't open module nv [ 9.267] (II) UnloadModule: "nv" [ 9.267] (II) Unloading nv [ 9.267] (EE) Failed to load module "nv" (module does not exist, 0) [ 9.267] (II) LoadModule: "vesa" [...] [ 9.399] drmOpenDevice: node name is /dev/dri/card14 [ 9.402] drmOpenDevice: node name is /dev/dri/card15 [ 9.406] (EE) [drm] failed to open device [ 9.406] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 9.406] (WW) Falling back to old probe method for fbdev [ 9.406] (II) Loading sub module "fbdevhw" [ 9.406] (II) LoadModule: "fbdevhw" EDIT8 In the meanwhile i tried to install WIN7 64 bit on my machine. As a result i got a BSOD after installing the nvidia driver. :-) For this reason i sent my new machine back to the hardware reseller. I will inform you as soon as i have a new system. Thank you all for the great help and support. EDIT9 In the meanwhile I have a complete new system with "only" a MSI N460GTX Hawk, but more RAM. The system works perfect. :-) The original N560GTX had a hardware defect. Is is possible to close this question? THX!

    Read the article

  • Day 1 of Oracle OpenWorld 2012 September 30

    - by Maria Colgan
    Howard Street in San Francisco is closed. The large Oracle tent is up! Attendees are arriving by the plane load at SFO. It can only mean one thing .... That's right!  Oracle OpenWorld officially starts today with the Oracle Users Forum. Ton's of great technical sessions selected by the Oracle User Groups get under way this morning at 8 am (Doh!). And of course, Larry's keynote is this evening 5:00 pm–7:00 pm, Moscone North. A must see, as he is bound to make some exciting announcements to get the show started! Hope to see ya there!   +Maria Colgan  

    Read the article

  • Save the Date for the Oracle Storage Community Forum at Oracle OpenWorld

    - by Ritu Chhibber-Oracle
    Dear Partners, Come and meet Oracle's Top Storage Executives, Architects and Fellow Customers & Partners at the Oracle Storage Community Forum at Oracle OpenWorld on October 1, 2014. This special event will feature interactive sessions on Oracle's Application Engineered Storage strategy, product directions, and real-world customer implementations. Discover the possibilities, as only Oracle can co-engineer hardware with Oracle Database and applications to deliver extreme performance, dynamic automation, management efficiency and cost savings. Storage Forum at Oracle OpenWorld Wednesday, October 1, 20143:30 p.m. - 5:00 p.m. Forum5:00 p.m. - 6:00 p.m. Reception Venue:Metreon – City View135 Fourth Street, Suite 4000,San Francisco, CA 94103 For more details and to register, please click here.

    Read the article

  • obiee 10g teradata Solaris deployment

    - by user554629
    I have 3-4 years worth of notes on proper Teradata deployment across multiple operating systems.   The topic that is too large to cover succinctly in a blog entry.   I'm trying something new:  document a specific situation, consolidate the facts, document diagnostic procedures and then clone the structure to cover other obiee deployments (11g and other operating systems). Until the icon below is removed, this blog entry may be revised frequently.  No construction between June 6th through June 25th. Getting started obiee 10g certification:  pg 24-25 Teradata V2R5.1.x - V2R6.2, Client 13.10, certified 10.1.3.4.1obiee 10g documentation: Deployment Guide, Server Administration, Install/Config Guideobiee overview: teradata connectivity downloads: ( requires registration )solaris odbc drivers: sparc 13.10:  Choose 13.10.00.04  ( ReadMe ) sparc 14.00: probably would work, but not certified by Oracle on 10g I assume you have obiee 10.1.3.4.1 installed; 10.1.3.4.2 would be a better choice. Teradata odbc install requires root for Solaris pkgadd Only 1 version of Teradata odbc can be installed.symbolic links to the current version are created in /usr/lib at install obiee implementation background database access has two types of implementation:  native and odbcnative drivers use DB vendor client interfaces for accessodbc drivers are provided by the DB vendor for DB accessTeradata is an odbc interface Database. odbc drivers require an ODBC Driver Managerobiee uses Merant Data Direct driver manager obiee servers communicate with one another using odbc.The internal odbc driver is implemented by the obiee team and requires Merant Driver Manager. Teradata supplies a Driver Manager, which is built by Merant, but should not be used in obiee. The nqsserver shared library deployment looks like this  OBIEE Server<->DataDirect Manager<->Teradata Driver<->Teradata Database nqsserver startup $ cd $BI/setup$ . ./sa-init64.sh$ run-sa.sh autorestart64 The following files are referenced from setup:  .variant.sh  user.sh  NQSConfig.INI  DBFeatures.INI  $ODBCINI ( odbc.ini )  sqlnet.ora How does nqsserver connect to Teradata? A teradata DSN is created in the RPD. ( TD71 )setup/odbc.ini contains: [ODBC Data Sources] TD71=tdata.so[TD71]Driver=/opt/tdodbc/odbc/drivers/tdata.soDescription=Teradata V7.1.0DBCName=###.##.##.### LastUser=Username=northwindPassword=northwindDatabase=DefaultDatabase=northwind setup/user.sh contains LIBPATH\=/opt/tdicu/lib_64\:/usr/odbc/lib\:/usr/odbc/drivers\:/usr/lpp/tdodbc/odbc/drivers\:$LIBPATHexport LIBPATH   setup/.variant.sh contains if [ "$ANA_SERVER_64" = "1" ]; then  ANA_BIN_DIR=${SAROOTDIR}/server/Bin64  ANA_WEB_DIR=${SAROOTDIR}/web/bin64  ANA_ODBC_DIR=${SAROOTDIR}/odbc/lib64         setup/sa-run.sh  contains . ${ANA_INSTALL_DIR}/setup/.variant.sh. ${ANA_INSTALL_DIR}/setup/user.sh logfile="${SAROOTDIR}/server/Log/nqsserver.out.log"${ANA_BIN_DIR}/nqsserver -quiet >> ${logfile} 2>&1 &   nqsserver is running: nqsserver produces $BI/server/nqsserver.logAt startup, the native database drivers connect and record DB versions.tdata.so is not loaded until a Teradata DB connection is attempted.    Teradata odbc client installation Accept all the defaults for pkgadd.   Install in /opt. $ mkdir odbc$ cd odbc$ gzip -dc ../tdodbc__solaris_sparc.13.10.00.04.tar.gz | tar -xf - $ sudo su# pkgadd -d . TeraGSS# pkgadd -d . tdicu1310# pkgadd -d . tdodbc1310   Directory Notes: /opt/teradata/client/13.10/odbc_64/lib/tdata.soThe 64-bit obiee library loaded by nqsserver. /opt/teradata/client/13.10/odbc_64/lib is not needed in LD_LIBRARY_PATH /opt/teradata/client/13.10/tdicu/lib64is needed in LD_LIBRARY_PATH /usr/odbc should not be referenced;  it is a link to 32-bit libraries LD_LIBRARY_PATH_64 should not be used.     Useful bash functions and aliases export SAROOTDIR=/export/home/dw_adm/OracleBIexport TERA_HOME=/opt/teradata/client/13.10 export ORACLE_HOME=/export/home/oracle/product/10.2.0/clientexport ODBCINI=$SAROOTDIR/setup/odbc.iniexport TD_ICU_DATA=$TERA_HOME/tdicu/lib64alias cds="alias | grep '^alias cd' | sed 's/^alias //' | sort"alias cdtd="cd $TERA_HOME; ls" alias cdtdodbc="cd $TERA_HOME/odbc_64; ls -l"alias cdtdicu="cd $TERA_HOME/tdicu/lib64; ls -l"alias cdbi="cd $SAROOTDIR; ls"alias cdbiodbc="cd $SAROOTDIR/odbc; ls -l"alias cdsetup="cd $SAROOTDIR/setup; ls -ltr"alias cdsvr="cd $SAROOTDIR/server; ls"alias cdrep="cd $SAROOTDIR/server/Repository; ls -ltr"alias cdsvrcfg="cd $SAROOTDIR/server/Config; ls -ltr"alias cdsvrlog="cd $SAROOTDIR/server/Log; ls -ltr"alias cdweb="cd $SAROOTDIR/web; ls"alias cdwebconfig="cd $SAROOTDIR/web/config; ls -ltr"alias cdoci="cd $ORACLE_HOME; ls"pkgfiles() { pkgchk -l $1 | awk  '/^Pathname/ {print $2}'; }pkgfind()  { pkginfo | egrep -i $1 ; } Examples: $ pkgfind td$ pkgfiles tdodbc1310 | grep 64$ cds$ cdtdodbc$ cdsetup$ cdsvrlog$ cdweblog

    Read the article

  • How to improve wireless network speed?

    - by Toby
    I am running 10.04 LTS on a desktop PC with a Belkin G-Plus MIMO Wireless network card. Ever since running Ubuntu on the machine I have noticed fairly slow network speeds (about half the speed I get when running the same card through Windows) I did some research I found out that by and large wireless network cards aren't that well supported on most Linux distros. I was wondering though if there is anything I could be tweaking on the system that could help squeeze a little more out of the card? Here is some more information *-network:1 description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:1c:df:24:5e:54 capabilities: ethernet physical wireless configuration: broadcast=yes ip=192.168.1.5 multicast=yes wireless=IEEE 802.11bg

    Read the article

  • Audio 2 dj soundcard configuration

    - by Jaroslav
    I have an http://www.native-instruments.com/#/en/products/dj/audio-2-dj/ The problem in settings it only sees one outpout, when there should be two(I need that for mixxx etc.) Also I want to be able set the sample rate to one of these 44.1, 48, 88.2, 96 kHz or at least check which one is set. Additionally if possible setting the latency would be an advantage. Some info: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: TraktorAudio2 [Traktor Audio 2], device 0: Traktor Audio 2 [Traktor Audio 2] Subdevices: 1/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0xfdcfc000 irq 45 1 [TraktorAudio2 ]: snd-usb-caiaq - Traktor Audio 2 Native Instruments Traktor Audio 2 (usb-0000:00:1d.7-8)

    Read the article

  • Sound issues after trying everything

    - by Lerp
    I cannot get my sound working properly, no matter what I do, there's always some problem. It's very annoying as it's the only thing preventing me from making Ubuntu my main OS. At the moment my sound always plays through both my speakers and my headphones regardless except the sound through the headphones is crackly. It is also a bit quiet even though everything is maxed. I've managed to improve the situation to a point where the sound out of my speakers is perfect but I have none at all from my headphones. I do have two connectors listed in the sound settings but regardless of which one is selected it always plays through the speakers. I think this might have something to do with the fact that my speakers are plugging into the front of my computer, typically the headphone jack, and my headphones are plugging into the back but when I try disconnecting the speakers from the front there is still no sound from the headphones. I fixed the speaker sound by going through the sound settings and making sure they were all set to 100% then rebooting. Things I have tried: Maxing everything and unmuting everything in alsamixer Uninstalling pulseaudio Making gstreamer use only alsa via gstreamer-properties. This worked with the sound test button including independent sound between headphones and speakers but when I reset the computer it no longer worked. So I tried setting it manually in gconf-editor which didn't work either. Reinstalling alsa and pulseaudio Setting the model in /etc/modprobe.d/alsa-base.conf to 6stack and 6stack-dig neither worked. Upgrading to 12.10 Here's some command output to help you diagnose my problem. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 sudo lshw -C sound *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:70 memory:f7ff8000-f7ffbfff cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 options snd-hda-intel model=6stack

    Read the article

  • Monitor resolution messed up, monitor is unknown.

    - by Kaustubh P
    Is there anyway to reset my monitor? My moitor is using the xorg.conf file. I use 10.04, without any Graphics Card. My monitor is an Acer X193W, with a native resolution of 1440x900. This is my xorg.conf file: Section "Screen" Identifier "Configured Screen Device" Device "Configured Video Device" Monitor "Test" DefaultDepth 16 SubSection "Display" Depth 16 Modes "1440x900_60.00" EndSubSection EndSection #Section "Device" # Identifier "Configured Video Device" # HorizSync # VertRefresh #EndSection I still cant view the native resolution, even when defined in the xorg file. An way I can revert to the default, or delete some files, to make the system detect the monitor again? My last resort is the cvt method, and adding it to the xrandr file. EDIT: I use Intel Drivers. My /proc/fb contains 0 VGA16 VGA

    Read the article

  • Could not apply stored configuration for monitors

    - by Hernantz
    Well this happened when I upgraded to Natty. Not only seems I can't change my resolution to higher than 1024x768 but it appears at the left and using only 70% of the monitor's width. I tried logging in but in ubuntu classic mode, and i was able to change it, but that trick did not work anymore. (May this be a compiz problem?) Anyways, here is my /var/log/Xorg.0.log http://pastebin.com/Ew4wwLab and lspci -nn | grep VGA: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) I tried using xrandr for adding manually a resolution of 1280x1768 but without luck. Here is the xrandr output Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) TV1 disconnected (normal left inverted right x axis y axis) 1280x1024 (0xc6) 109.0MHz h: width 1280 start 1368 end 1496 total 1712 skew 0 clock 63.7KHz v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz

    Read the article

  • Ubuntu 12.10 64bit fresh install, wireless issue!

    - by Dave
    Just installed a fresh Ubuntu 12.10 64bit on my laptop, run the update manager, restarted and suddenly I can't use my wifi anymore. Ubuntu software center installed automatically the wifi additional driver as you can see in my screenshot. If I mark the option "Do not use the device" and apply changes, restarting Ubuntu my wifi is back and I can use it. If I run iwconfig my terminal is showing this Now if I use Ubuntu for more than 20 minutes surfing the web my wifi it keeps to be connected but I don't receive any signal from it. Any page I try to open it simply don't open (just waiting icon). If I disconnect my wifi and connect it again, same issue, it doesn't work. The only way to make it work again is to restart Ubuntu. And the same story it happens again after aprox. 20, 30 minutes. WIFI device details: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Thanks, Dave

    Read the article

  • /etc/X11/xorg.conf doesn't exist?

    - by BBetances
    I'm trying to get my video card properly setup to handle 3D acceleration. After searching a bit, I've come across a few howtos that tell me I need to edit my xorg.conf file. That file doesn't exist. X.org is installed by default, I'm sure, and I figured this video card would be widely supported. 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) Any ideas on how I can get this to work properly and play Starcraft II? Or any game for that matter? No resolution problems or anything, just no 3D rendering.

    Read the article

  • How to forward an Internet connection to another network?

    - by Naveen
    Can somebody please make a shot & sweet tutorial telling how to forward an Internet connection to different network interfaces in Ubuntu...? This is the idea: I'm using a 3G usb modem to get Internet on my laptop ,which is: ppp0 IP=10.225.174.70 My Wifi device is: wlan0 MAC=78:e4:00:d4:3d:85 These devices are determined from ifconfig command. I want to share ppp0's internet connection with wlan0 device, so I can connect any other device to wlan0 and browse internet from that device. Making a Hotspot using Network settings GUI doesn't do the trick because the other device won't receive Internet, it just connects to wlan0. I heard iptables can do this, but I'm totally confused by the alien commands seen online. I'm no expert in networking. Please compose a clear & simple answer using the above devices. This is a huge annoying problem for iPhone & tablet users came to Ubuntu from Windows.

    Read the article

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >