Search Results

Search found 24378 results on 976 pages for 'pinned site'.

Page 1/976 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Outside VPN traffic not able to ping site-to-site VPN remote site

  - by Siriss

  we have two ASA 5510s running 8.4 in a site-to-site VPN setup. All internal traffic is working smoothly. Site/Subnet A: 192.100.0.0 - local Site/Subnet B: 192.200.0.0 - remote VPN Users: 192.100.40.0 - assigned by ASA When you VPN into the network, all traffic hits Site A, and everything on subnet A is accessible. Site B however, is completely inaccessible for VPN users. All machines on subnet B, the firewall itself, etc... is not reachable by ping or otherwise. I know I am missing a NAT rule, and in 8.2, it was easy as pie to setup using ASDM, but now I can't get it for the life of me as 8.4 apparently made a lot of changes to NAT rules. I am not too comfortable in the ASA command line, but if there is a command I need to add or if you could direct me where I can add this in 8.4 ASDM I would really appreciate it. I have tired NAT Exempt, Static NAT, Static NAT Policies, etc... I think I tried all the options. I also might have my interfaces confused with the new look at feel of ASDM. Thank you much in advance and I hope I have been thorough enough.

  Read the article

• Route additional network through Sonicwall site-to-site VPN

  - by Brandon

  I have a sonicwall site to site vpn. At one of the sites there is another Cisco vpn to another site. I need to route the traffic for the cisco vpn through the site to site from the other sonicwall site. Site A - 10.10.0.0 /16 network Site B - 192.168.1.0 /24 Sonicwall, A cisco vpn is on 192.168.1.226 address and has routes the 10.10.0.0 network to Site A. Site C - 192.168.2.0 /24 Sonicwall Site A-B VPN is working Site B-C VPN is working I need to get Site C to transmit the 10.10.0.0 traffic over the VPN to site B and then out the Cisco device.

  Read the article

• Cant logon to domain over site-to-site vpn

  - by 3molo

  Tied together branch office with main office over two Cisco ASAs. The (internal) networks on either side can communicate with the other. I can ping, use the DC's DNS service and even join a domain on a new client. I can't however logon, I get the "domain controller is not available" error message on client. I find nothing peculiar in DC's event logs. Sicne it's site-to-site (with ping), it's always up so it should work. No firewall rules (except allow any any) between the two networks (of either side). Main site internal net: 10.10.10.0/24 Branch office net: 10.180.3.0/24 Am I overlooking something here? Where should I start investigating this?d

  Read the article

• Site-to-site VPN using MD5 instead of SHA and getting regular disconnection

  - by Steven

  We are experiencing some strange behavior with a site-to-site IPsec VPN that goes down about every week for 30 minutes (Iam told 30 minutes exactly). I don't have access to the logs, so it's difficult to troubleshoot. What is also strange is that the two VPN devices are set to use SHA hash algorithm but apparently end up agreeing to use MD5. Does anybody have a clue? or is this just insufficient information?

  Read the article

• Google Chrome pinned to Windows 7 taskbar not opening under pinned icon

  - by Slothsberry

  I have both Google Chrome and Eclipse pinned to my taskbar in Windows 7 64-Bit. However, when I launch these programs, they don't appear to open under the pinned taskbar icon Eclipse behaves similarly. The Eclipse launcher/workspace selector is under the pinned icon, but once the IDE opens, it moves from the pinned icon, to a new group at the end of the taskbar. Unpinning/repinning doesn't seem to do the trick. It's bothersome to have taskbar space wasted on both the launcher icon, and the window button. Anybody have an idea how to get normal behavior out of the taskbar?

  Read the article

• Route from Cisco ASA over site to site VPN

  - by Wookie321

  I want to be able to push f/w logging traffic to a server at a remote site. This server is accepting syslog traffic on port 514. In the ASA I've configured it to use this server as a syslog server. The Cisco f/w's inside interface address is 10.0.0.1 and I want to route over the link to an address of 192.168.1.1. The vpn is up and working between sites, and local clients at each site can access resources etc. How would I go about setting up the route from the f/w to this remote server only?

  Read the article

• L2TP server - site-to-site vpn connection

  - by Pyro

  I am not sure this is the right place for this question but here goes. We want to connect users using an L2TP VPN connection to a users at the other end of a SonicWall site-to-site VPN. Currently we have a SonicWall firewall/router contraption in the home-office that is connected to a far-office over a VPN. Communications with machines in the home-office and far-office is fine. We also have an L2TP server running on the SonicWall that outside users can connect to. This gives them access to machines in the home-office. Communication between outside users and the home-office is fine. However outside users connected to the home-office via the L2TP server can't communicate with machines in the far-office. Will there need to be network bridging or routing needed? Or will this simply be a firewall setting to get this working? Thanks for any help or clues you provide! Rob

  Read the article

• Site-to-Site PPTP VPN connection between two Windows Server 2008 R2 servers

  - by steve_eyre

  We have two Windows Server 2008 R2 machines, one in our main office and one in a new office which we have just moved offsite. The main office has previously been handling client-to-server PPTP VPN connections. Now that we have moved our second server out of office, we want to set up a demand-dial or persistent VPN connection from the second server to the primary. Using a custom setting RRAS profile, we have successfully managed to set up a site-to-site VPN connection so that from the second server itself, it can access any of the devices in the main office and communicate back. However, any connected machines in the second office cannot use this connection, even when using the second server as gateway. The demand-dial interface is setup from the Second Server dialing into Main Server and a static route set up on RRAS for 192.168.0.0 with subnet mask 255.255.0.0 pointing down this network interface. The main office has the network of 192.168.0.0/16 (subnet mask 255.255.0.0). The second office has the network of 172.16.100.0/24 (subnet mask 255.255.255.0). What steps do we need to take to ensure traffic from the second office PCs going towards 192.168.x.x addresses use the VPN route? Many Thanks in advance for any help the community can offer. Debug Information Here is the route print output from the second server: =========================================================================== Interface List 23...........................Main Office 22...........................RAS (Dial In) Interface 16...e0 db 55 12 fa 02 ......Local Area Connection - Virtual Network 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 24...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.222 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 <MAIN OFFICE IP> 255.255.255.255 172.16.100.250 172.16.100.222 6 172.16.100.0 255.255.255.0 On-link 172.16.100.222 261 172.16.100.113 255.255.255.255 On-link 172.16.100.113 306 172.16.100.222 255.255.255.255 On-link 172.16.100.222 261 172.16.100.223 255.255.255.255 On-link 172.16.100.222 261 172.16.100.224 255.255.255.255 On-link 172.16.100.222 261 172.16.100.225 255.255.255.255 On-link 172.16.100.222 261 172.16.100.226 255.255.255.255 On-link 172.16.100.222 261 172.16.100.227 255.255.255.255 On-link 172.16.100.222 261 172.16.100.228 255.255.255.255 On-link 172.16.100.222 261 172.16.100.229 255.255.255.255 On-link 172.16.100.222 261 172.16.100.230 255.255.255.255 On-link 172.16.100.222 261 172.16.100.255 255.255.255.255 On-link 172.16.100.222 261 192.168.0.0 255.255.0.0 192.168.101.87 192.168.101.17 266 192.168.101.17 255.255.255.255 On-link 192.168.101.17 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.222 261 224.0.0.0 240.0.0.0 On-link 172.16.100.113 306 224.0.0.0 240.0.0.0 On-link 192.168.101.17 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.222 261 255.255.255.255 255.255.255.255 On-link 172.16.100.113 306 255.255.255.255 255.255.255.255 On-link 192.168.101.17 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.200 Default 0.0.0.0 0.0.0.0 172.16.100.250 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 16 261 fe80::/64 On-link 16 261 fe80::edf4:85c6:3c15:dcbe/128 On-link 1 306 ff00::/8 On-link 16 261 ff00::/8 On-link 22 306 ff00::/8 On-link =========================================================================== Persistent Routes: None And here is the route print from one of the second office PCs: =========================================================================== Interface List 11...10 78 d2 32 53 27 ......Atheros AR8151 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.103 10 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.16.100.0 255.255.255.0 On-link 172.16.100.103 266 172.16.100.103 255.255.255.255 On-link 172.16.100.103 266 172.16.100.255 255.255.255.255 On-link 172.16.100.103 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.103 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.103 266 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 11 266 fe80::/64 On-link 11 266 fe80::e973:de17:a045:aa78/128 On-link 1 306 ff00::/8 On-link 11 266 ff00::/8 On-link =========================================================================== Persistent Routes: None

  Read the article

• Router for creating site to site VPN to server provider using Cisco ASA 5540

  - by fondie

  We have dedicated servers hosted for us by a third party, we connect to these over a VPN. My server provider uses Cisco ASA 5540 as VPN devices. Currently we're using software clients on individual machines to connect to this VPN, either: Cisco VPN Client Shrew Soft VPN Connect However, I'm looking to purchase a new load balancing router for our office and thought this could be an opportunity to get VPN client duties taken over by hardware. We could then create a permanent VPN tunnel that could be used by anyone on the network with no software client necessary. Sadly I'm not the most knowledgeable on this kind of stuff so is: 1) This a realizable goal? Next I need to know what kind of hardware I will need. I'm not looking to spend lots of money on this (~$500), so doubtful I can afford any Cisco kit. Therefore, this is the most promising candidate I've seen (as far as my limited knowledge goes): Draytek Vigor 2955 - http://www.draytek.co.uk/products/vigor2955.html 2) Would this be compatible with the Cisco kit my server provider uses? 3) If not, are there any alternatives I should consider? Many thanks in advance.

  Read the article

• How to host a site in another site - with little or no coding

  - by tunmise fasipe

  SUMMARY: All of these happens on Site A User visits site A User enter username and password User click on Login Button User authenticated on Site B behind the scene User is shown a page on Site A that contains his/her profile from Site B as layout/styled from Site B User can click links in the Profile page that links to other area in Site B Meaning: Session has to be maintained somehow I have web application where I store users' password and username. If you logon to this site, you can login with the password and username to have access to your profile. There is another option that requires you to login to my site from your site and have your profile displayed within your site. This is because you might already have a site that your clients know you with. This link is close to what I want to do: http://aspmessageboard.com/showthread.php?t=235069 A user on Site A login to Site B and have the information on site B showing in site A. He should not know whether Site B exists. It should be as if everything is happening in Site A This latter part is what I don't know to implement. I have these ideas: Have a fixed IFrame within your site to contain my site: but I am concerned about size/layout since different clients have different layout/size for their content section. I am thinking of how to maintain session too A webservice: I don't know how feasible this is since the Password and ID are on my server. You may have to send them back and forth. It means client would have to code with my API. But I am not just returning data, I have to show them a page that contains the profile details OpenID, Single-SignOn: Just guessing - but the authentication and data resides on my server. there is nothing to access on your side in this case Examples: like login into facebook within my site and still be able to do post updates, receive notifications Facebook implement some of these with IFrame e.g. the Like button *NOTE: * I have tested the IFrame option. It worked but I still have to remove my site specific content like my page Banner, Side Navigation etc. I was able to login normally as if I was actually on the site. This show my GUI but - style sheet was missing - content not styled with CSS - Any relative url won't work. It would look for that resource relative to the current server. Unless I change links to absolute - Clicking on the LogIn button produces this error: The state information is invalid for this page and might be corrupted. UPDATE: I was reading about REST webservice few days ago and I got this idea: What about the idea of returning an XML from a webservice [REST or SOAP] and providing an XSLT (that I can provide) to display it. Thus they won't have to do much coding?

  Read the article

• WSS 3.0 Backup/Restore Root Site Collection to Sub-Site of New Site Collection

  - by bfrancis

  Our intranet was originally setup to be at the root of its site collection. We are trying to change this so that our new internet site will live in the root and the intranet will be a sub-site. At this point I have created a new web application and site collection to house the internet and intranet. I used the 'stsadm -o backup' command to create a backup of our current intranet. I then ran the 'stsadm -o restore' command to restore the intranet site collection to wss/sites/intranet. This seems to have worked as I am able to access the intranet from this location. The issue I now seem to have is that images, sub-sites, etc. are all making reference as if the intranet is still the root site. So for example a link to a sub-site is pointing to wss/department/technology/default.aspx and it needs to point to wss/sites/intranet/department/technology/default.aspx. I am looking for help and/or clarification on two things: 1. Am I approaching the migration of a root site collection to a sub-site the best way? 2. How would I go about updating the link references so that they are based on the intranet now being a sub-site instead of the root site?

  Read the article

• Are SharePoint site templates really less performant than site definitions?

  - by Jim

  So, it seems in the SharePoint blogosphere that everybody just copies and pastes the same bullet points from other blogs. One bullet point I've seen is that SharePoint site templates are less performant than site definitions because site definitions are stored on the file system. Is that true? It seems odd that site templates would be less performant. It's my understanding that all site content lives in a database, whether you use a site template or a site definition. A site template is applied once to the database, and from then on the site should not care if the content was created using a site template or not. So, does anybody have an architectural reason why a site template would be less performant than a site definition? Edit: Links to the blogs that say there is a performance difference: From MSDN: Because it is slow to store templates in and retrieve them from the database, site templates can result in slower performance. From DevX: However, user templates in SharePoint can lead to performance problems and may not be the best approach if you're trying to create a set of reusable templates for an entire organization. From IT Footprint: Because it is slow to store templates in and retrieve them from the database, site templates can result in slower performance. Templates in the database are compiled and executed every time a page is rendered. From Branding SharePoint:Custom site definitions hold the following advantages over custom templates: Data is stored directly on the Web servers, so performance is typically better. At a minimum, I think the above articles are incomplete, and I think several are misleading based on what I know of SharePoints architecture. I read another blog post that argued against the performance differences, but I can't find the link.

  Read the article

• ClearOS - how to create a site to site VPN between two ClearOS boxes?

  - by Scott Szretter

  I plan on setting up some ClearOS boxes at several sites, and would like to set up site-to-site VPN between the remote sites and a main site (all running ClearOS enterprise 5.2sp1 / latest version). I have found references for how to set up ClearOS to VPN in to devices such as cisco for IPSEC, and others with PPTP. But for these methods it did not mention how you might configure 2 ClearOS boxes to talk to each other ipsec or pptp. I also saw documentation on installing OpenVPN and using the OpenVPN client software to VPN in to the ClearOS box. I will probably use this for individual users to VPN in, but I have some small sites ( 1 to 10 users) that will have their own ClearOS box and need to create a site to site VPN link back to the main site's OpenVPN box. Is this possible, can you point me to docs, or other info or basically, how? A couple updates: I did find a thread that asks the same basic question, where the user has a vpn set up between the two clearos machines (after installing ipsec vpn modules), just not transporting traffic between the LANS - and the very last post claims you have to edit some files (/etc/ipsec.conf) and set leftnexthop rightnexthop values to %direct. After that, it's supposed to work. Could it be that simple? I also posted to clear foundation, and they pointed me to some documentation for setting up ipsec unmanaged vpn. This looks pretty good, but, I will most likely need to figure out how to handle a dynamic dns type setup at least on one end. Also, what does it mean by multi-wan? Finally, what happens when a vpn connection goes down exactly - someone has to reboot the box or ?

  Read the article

• I have a very long and repetitive python path, where do I look to correct this?

  - by ninja123

  I know it is probably not necessary to paste the whole path, but just for the record I have done so below. Whenever I run a python command, it takes a long time to load this path I suppose. I have checked in .bash_profile and only have these two lines: export PATH=/Users/username/bin:/opt/local/Library/Frameworks/Python.framework/Versions/2.5/bin:/opt/local/bin:/opt/local/sbin:/opt/local/apache2/bin:$PATH export PYTHONPATH=/opt/local/lib/python2.5/site-packages/ And my python path as outputed by Django's debug is: Python path : ['/Users/username/Sites/videocluster/eggs/ipython-0.10-py2.5.egg', '/Users/username/Sites/videocluster/eggs/South-0.6.1-py2.5.egg', '/Users/username/Sites/videocluster/eggs/django_markitup-0.5.2-py2.5.egg', '/Users/username/Sites/videocluster/eggs/DateTime-2.12.0-py2.5.egg', '/Users/username/Sites/videocluster/eggs/Markdown-2.0.3-py2.5.egg', '/Users/username/Sites/videocluster/eggs/PIL-1.1.7-py2.5-macosx-10.5-i386.egg', '/Users/username/Sites/videocluster/eggs/djangorecipe-0.20-py2.5.egg', '/Users/username/Sites/videocluster/eggs/zc.recipe.egg-1.2.3b2-py2.5.egg', '/Users/username/Sites/videocluster/eggs/zc.buildout-1.5.0b2-py2.5.egg', '/Users/username/Sites/videocluster/eggs/pytz-2010h-py2.5.egg', '/Users/username/Sites/videocluster/eggs/zope.interface-3.6.1-py2.5-macosx-10.5-i386.egg', '/Users/username/Sites/videocluster/eggs/setuptools-0.6c11-py2.5.egg', '/Users/username/Sites/videocluster/parts/django', '/Users/username/Sites/videocluster', '/Users/username/Sites/videocluster/bin', '/opt/local/lib/python2.5/site-packages/setuptools_git-0.3.3-py2.5.egg', '/opt/local/lib/python2.5/site-packages/pysqlite-2.5.5-py2.5-macosx-10.5-i386.egg', '/opt/local/lib/python2.5/site-packages/CouchDB-0.5-py2.5.egg', '/opt/local/lib/python2.5/site-packages/httplib2-0.4.0-py2.5.egg', '/opt/local/lib/python2.5/site-packages/PyYAML-3.08-py2.5-macosx-10.5-i386.egg', '/opt/local/lib/python2.5/site-packages/simple_db_migrate-1.2.8-py2.5.egg', '/opt/local/lib/python2.5/site-packages/PyDispatcher-2.0.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/pyOpenSSL-0.9-py2.5-macosx-10.5-i386.egg', '/opt/local/lib/python2.5/site-packages/greenlet-0.2-py2.5-macosx-10.5-i386.egg', '/opt/local/lib/python2.5/site-packages/Supay-0.0.2-py2.5.egg', '/opt/local/lib/python2.5/site-packages/configobj-4.6.0-py2.5.egg', '/opt/local/lib/python2.5/site-packages/Fabric-0.9b1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/fudge-0.9.3-py2.5.egg', '/opt/local/lib/python2.5/site-packages/pydelicious-0.5.3-py2.5.egg', '/opt/local/lib/python2.5/site-packages/feedparser-4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/github_cli-0.2.5.2-py2.5.egg', '/opt/local/lib/python2.5/site-packages/simplejson-2.0.9-py2.5-macosx-10.5-i386.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', ......(repeating)....... '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/harobed.paster_template.advanced_package-0.2-py2.5.egg', '/opt/local/lib/python2.5/site-packages/squash-0.5.0dev-py2.5.egg', '/opt/local/lib/python2.5/site-packages/eventlet-0.8.13-py2.5.egg', '/opt/local/lib/python2.5/site-packages/FeinCMS-1.0.2-py2.5.egg', '/opt/local/lib/python2.5/site-packages/pyenchant-1.5.3-py2.5.egg', '/opt/local/lib/python2.5/site-packages/guppy-0.1.9-py2.5-macosx-10.5-i386.egg', '/opt/local/lib/python2.5/site-packages/django_scraper-0.1dev-py2.5.egg', '/opt/local/lib/python2.5/site-packages/Pympler-0.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/fabric.contrib.packagemanager-0.1dev-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/selenium-1.0.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/Scrapy-0.9_dev-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', ......(repeating)....... '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python25.zip', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-darwin', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-mac', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-mac/lib-scriptpackages', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/lib-tk', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/lib-dynload', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/Numeric', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/PIL', '/opt/local/lib/python2.5/site-packages/PIL', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', ......(repeating)....... '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/gtk-2.0'] Someone, please tell me where I can go to correct this. Thanks

  Read the article

• cant access site intermittent as i get site not available

  - by user61438

  i have a news site i check stuff for regularly.. once in a while i cant access it completely from my 5 different browsers and even from the command line, nslookup cant resolve, ping and tracert fails.. all not being able to resolve site name..the problem is specific to this.. i am told by the site support person that problem is that its cache on my machine or on ISP and I say thats not true because this site I access it 1-2-3 times a week from one browser only.. i only fire up the other ones in times of trouble..and when i have the problem even if i try on my secondary machines i still get the same problems.. when problem goes away all works well.... question is whats causing the intermittent dns/http problems... i don't believe this is something to do with my machine because probe disappears without me having done anything at all.

  Read the article

• How can I forward ALL traffic over a site-to-site VPN on Cisco ASA?

  - by Scott Clements

  Hi There, I currently have two Cisco ASA 5100 routers. They are at different physical sites and are configured with a site-to-site VPN which is active and working. I can communicate with the subnets on either site from the other and both are connected to the internet, however I need to ensure that all the traffic at my remote site goes through this VPN to my site here. I know that the web traffic is doing so as a "tracert" confirms this, but I need to ensure that all other network traffic is being directed over this VPN to my network here. Here is my config for the ASA router at my remote site: hostname ciscoasa domain-name xxxxx enable password 78rl4MkMED8xiJ3g encrypted names ! interface Ethernet0/0 nameif NIACEDC security-level 100 ip address x.x.x.x 255.255.255.0 ! interface Ethernet0/1 description External Janet Connection nameif JANET security-level 0 ip address x.x.x.x 255.255.255.248 ! interface Ethernet0/2 shutdown no nameif security-level 100 no ip address ! interface Ethernet0/3 shutdown no nameif security-level 100 ip address dhcp setroute ! interface Management0/0 nameif management security-level 100 ip address 192.168.100.1 255.255.255.0 management-only ! passwd 2KFQnbNIdI.2KYOU encrypted ftp mode passive clock timezone GMT/BST 0 clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00 dns domain-lookup NIACEDC dns server-group DefaultDNS name-server 154.32.105.18 name-server 154.32.107.18 domain-name XXXX same-security-traffic permit inter-interface same-security-traffic permit intra-interface access-list ren_access_in extended permit ip any any access-list ren_access_in extended permit tcp any any access-list ren_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 192.168.3.0 255.255.255.0 access-list NIACEDC_nat0_outbound extended permit ip 192.168.12.0 255.255.255.0 192.168.3.0 255.255.255.0 access-list JANET_20_cryptomap extended permit ip 192.168.12.0 255.255.255.0 192.168.3.0 255.255.255.0 access-list NIACEDC_access_in extended permit ip any any access-list NIACEDC_access_in extended permit tcp any any access-list JANET_access_out extended permit ip any any access-list NIACEDC_access_out extended permit ip any any pager lines 24 logging enable logging asdm informational mtu NIACEDC 1500 mtu JANET 1500 mtu management 1500 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-522.bin no asdm history enable arp timeout 14400 nat-control global (NIACEDC) 1 interface global (JANET) 1 interface nat (NIACEDC) 0 access-list NIACEDC_nat0_outbound nat (NIACEDC) 1 192.168.12.0 255.255.255.0 access-group NIACEDC_access_in in interface NIACEDC access-group NIACEDC_access_out out interface NIACEDC access-group JANET_access_out out interface JANET route JANET 0.0.0.0 0.0.0.0 194.82.121.82 1 route JANET 0.0.0.0 0.0.0.0 192.168.3.248 tunneled timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute http server enable http 192.168.12.0 255.255.255.0 NIACEDC http 192.168.100.0 255.255.255.0 management http 192.168.9.0 255.255.255.0 NIACEDC no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto map JANET_map 20 match address JANET_20_cryptomap crypto map JANET_map 20 set pfs crypto map JANET_map 20 set peer X.X.X.X crypto map JANET_map 20 set transform-set ESP-AES-256-SHA crypto map JANET_map interface JANET crypto isakmp enable JANET crypto isakmp policy 10 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 50 authentication pre-share encryption aes-256 hash sha group 5 lifetime 86400 tunnel-group X.X.X.X type ipsec-l2l tunnel-group X.X.X.X ipsec-attributes pre-shared-key * telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd address 192.168.100.2-192.168.100.254 management dhcpd enable management ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect http ! service-policy global_policy global prompt hostname context no asdm history enable Thanks in advance, Scott

  Read the article

• Remote site AD design (2003)

  - by Boy Mars

  A remote site has about 25 of our 50-ish employees. They have their own AD domain presently (2003) but I want to look at getting them onto the same global domain for ease of access/administration. The remote site has a VPN link but line speeds are very poor. I am already aware of tools like ADMT and have done a few migrations in the past (NT/2003 domains), but this is the first time I have the luxury of designing how this domain is organised. So I'm looking for tips on good AD design; would a remote site be better served as a sub-domain? would this reduce traffic? I am only currently looking at 2003 since only existing machine will be used.

  Read the article

• Site to site VPN using RRAS from an untrusted network?

  - by DrZaiusApeLord

  Our remote office will be moving to a new space where internet will be provided. They'll be behind a router doing NAT (I do not have admin rights to this router). They will be sharing a printer with the other people on the LAN, but will need VPN to our network for email and file shares. I was thinking of just having them run the windows VPN client and connecting via PPTP like they do when they are off-site, but I have read that multiple PPTP connections from the same NAT'd address to the same destination doesn't work well or at all. I am thinking some kind of site-to-site VPN is needed so there is just one tunnel. Can I just put in a VPN gateway, set it to connect to our RRAS/PPTP server, and have them use it as their default gateway? Perhaps even use the local default gateway for internet traffic. If so, what VPN gateway/device is recommended for this? Or other solutions? Thanks.

  Read the article

• Using a site page to find out the web Template Name used in a SharePoint Site

  - by ybbest

  Today, I have created a SharePoint solution. It deploys a site page with code behind to show the web template name used in a SharePoint site. You can download the project from here. After you have deployed the project, you can see your template name from http://[site collection Name]/sitepage/WebTemplateInfo.aspx References: http://blogs.msdn.com/b/kaevans/archive/2010/06/28/creating-a-sharepoint-site-page-with-code-behind-using-visual-studio-2010.aspx http://www.devexpertise.com/2009/02/06/sharepoint-list-template-ids-and-site-template-ids/ http://blog.rafelo.com/2008/05/determining-site-template-used-on.html

  Read the article

• What are pinned objects?

  - by sagie

  Hi. I am trying to find a memory leak using ants memory profiler, and I've encountered in a new term: Pinned objects. Can some one give me a good & simple explanation about what this objects are, How can I pinn/Unpinn objects, and detect who pinned objects? Thanks

  Read the article

• Site to Site VPN problem, connection succesful data only oneway?

  - by Charles

  To start things off, I'm not the actual Administrator for the VPN Server, but he is also at a loss so I thought I'd ask it here. I know it's a Cisco ASA Firewall/VPN. I have a router that connects to the Cisco VPN server, it does so succesfully. I can ping everything within the remote network and from the remote network into my own. I've been able to SSH into a remote server over VPN as well, it all seems to work; until there's some more data returned. A quick example would be an internal webserver. The default homepage simply redirects, so only sends back HTTP headers with a "Location:". I receive this on my computer, but when I request the actual page then (which isn't that big) I don't get a response at all - it just stalls. And it does this for other services as well, for example SSH. I can do a couple of things while connected, but if there's more than xx output it seems to do nothing. The connection remains active throughout all of this. Has anyone ever experienced anything like this before / know what the problem might be? Another user who has a site-to-site connection with this VPN using the -exact same setup- has no problems, the only difference is that I have around 200ms ping to the VPN server/network because of a very long distance (other continent).

  Read the article

• iFrame ads from site to site

  - by user28327

  How I can make the iFrame ads from site A to site B not like this: <iframe src="http://www.site.com"></iframe> Example: site A <script type="text/javascript"><!-- google_ad_client = "ca-pub-3434343507"; /* site */ google_ad_slot = "343435270"; google_ad_width = 728; google_ad_height = 90; //--> </script> <script type="text/javascript" src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> </script> site B --iFrame-- <script type="text/javascript"><!-- google_ad_client = "ca-pub-3434343507"; /* site */ google_ad_slot = "343435270"; google_ad_width = 728; google_ad_height = 90; //--> </script> <script type="text/javascript" src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> </script> --iFrame--

  Read the article

• Sharepoint 2010 moving site collection to different database error

  - by Brandon Ulasiewicz

  I am trying to move a site collection from one content database to another content database. First I used the following PowerShell command: New-SPContentDatabase -Name New_DB -WebApplication http://portal/ I confirmed that this did in fact create the DB in the SQL Server. I then used the following command: Move-SPSite http://portal/sites/hr -DestinationDatabase New_DB This generates an error stating that the "Operation is not valid due to the current state of the object" Can anyone help point me in the right direction with this? Thanks

  Read the article

• Do I create new site or add to existing site?

  - by nitbuntu

  Hi, Suppose, as an example, I have a website with the address, www.cool-gifts.com and I'm getting regular sales and its a worthwhile site, but no great fireworks. After research I find that there is a great market for '2nd hand stuff' and I'd like to serve that market. Would it be best to add '2nd hand stuff' as an additional category of gifts in my existing site....or, since the 2nd hand stuff is a market in itself, would I be better off investing time and energy bringing up a whole new site (www.used-stuff.com)? If I had employees and financial resources, it probably would be a no-brainer...start a new site. But, what if you are a small guy, with limited resources? So...new site....or add to existing site?

  Read the article

• Windows secure pinned website tile

  - by Stijn de Voogd

  I'm currently working on a pinned website tile for my website and instead of using a static XML file i'm linking the tile to a web api that returns user specific XML. My question is: Is it possible to secure this tile so that a user needs to be logged in before the data loads? The pinned website livetile doesn't send any security request headers/ cookies: - Http: Request, GET /v1/livetile/firsttile Command: GET + URI: /v1/livetile/firsttile ProtocolVersion: HTTP/1.1 UserAgent: Microsoft-WNS/6.3 Host: 192.168.14.109:2089 Cache-Control: no-cache HeaderEnd: CRLF Sidenote: Notice how it's not even sending an accept header even though it only wants xml. Info: http://msdn.microsoft.com/en-US/library/ie/dn455106 http://msdn.microsoft.com/en-us/library/ie/hh761491.aspx# Thanks in advance!

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >