Search Results

Search found 214 results on 9 pages for 'stan quinn'.

Page 1/9 | 1 2 3 4 5 6 7 8 9  | Next Page >

  • Questions regarding ordering of catch statements in catch block - compiler specific or language stan

    - by Andy
    I am currently using Visual Studio Express C++ 2008, and have some questions about catch block ordering. Unfortunately, I could not find the answer on the internet so I am posing these questions to the experts. I notice that unless catch (...) is placed at the end of a catch block, the compilation will fail with error C2311. For example, the following would compile: catch (MyException) { } catch (...) { } while the following would not: catch (...) { } catch (MyException) { } a. Could I ask if this is defined in the C++ language standard, or if this is just the Microsoft compiler being strict? b. Do C# and Java have the same rules as well? c. As an aside, I have also tried making a base class and a derived class, and putting the catch statement for the base class before the catch statement for the derived class. This compiled without problems. Are there no language standards guarding against such practice please?

    Read the article

  • update-java-alternatives vs update-alternatives --config java

    - by Stan Smith
    Thanks in advance from this Ubuntu noob... On Ubuntu 12.04 LTS I have installed Sun's JDK7, Eclipse, and the Arduino IDE. I want the Arduino to use OpenJDK 6 and want Eclipse to use Sun's JDK 7. From my understanding I need to manually choose which Java to use before running each application. This led me to the 'update-java-alternatives -l' command... when I run this I only see the following: java-1.6.0-openjdk-amd64 1061 /usr/lib/jvm/java-1.6.0-openjdk-amd64 ...but when I run 'update-alternatives --config java' I see the following: *0 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/java auto mode 1 /usr/lib/jvm/java-6-openjdk-amd64/jre/bin/java manual mode 2 /usr/lib/jvm/jdk1.7.0/bin/java manual mode 3 /usr/lib/jvm/jre1.7.0/bin/java manual mode I don't understand why the update-java-alternatives doesn't display the same 3 options. I also don't understand how to switch between OpenJDK6 and JDK7. Can someone please explain how I can go about using the OpenJDK6 for Arduino development and Sun JDK7 for Eclipse/Android development? Thank you in advance for any assistance or feedback you can offer. Stan

    Read the article

  • EVENT RECAP: Oracle Health Sciences Conference

    - by cwarticki
    Monaco served as an intense location for this year's Oracle Health Sciences User Group conference.  It was a "Grand Prix" event with nearly 200 attendees from all over the world.  In a country famous for high performance race cars, luxury super yachts and lifestyles of the rich & famous, the conference was very Ellison-esque. I think the Superyachts were being paired with Exadata. The OSHUG staff were fantastic . Robin and Taylor (pictured left) from Drohan Management took care of all the details and were wonderful to get to know. I met with some real Oracle loyalists.  Stan Sachar,  I.T. Manager for Westat, and the Focus Group co-chair for Admin Configuration Mgmt (ACM).  Westat was an early adopter of Oracle Clinical for clinical trial projects with installations in 1997-98.  I had a chance to talk with Stan during the reception and he is an Oracle advocate and evangelist. He's invested in his career in using Oracle products. (Stan Sachar pictured right with Dick Wolnick from Oracle, on left) I also met with Mirco Becker from Grunenthal Gmbh.  He's been working with the Argus product for over 6 years.  He's a big user of Oracle Support. Mirco attended my support best practices session and was actively engaged and asked several questions.  He's excited to adopt those best practices and work more efficiently and effectively with Support. Finally, I thank the many who attended my session.  I admit, the beautiful weather and view of the ocean was a distraction, but nonetheless my mission was to provide you with all the necessary support resources for Health Sciences users. You will find a copy of my presentation on the OSHUG website. Bon Voyage Monaco.  Thanks for the memories.  I'll see everyone next year, in Miami. -Chris WartickiGlobal Customer Management

    Read the article

  • How do I stop XNA/Visual Studio from rebuilding my content project every time I build?

    - by Phil Quinn
    My group and I are working on a game in XNA 4.0 with Visual Studio 2010/2012. The main solution has 6 projects: 2 XNA game projects (1 executable/ 1 class library), 1 WPF executable for the level editor, 2 standard class libraries, and a content project. Originally, the editor and engine XNA game projects had a content reference to separate content projects. Recently, I consolidated the content projects into one to simplify asset additions. Since pushing these changes to our git repo, certain members of my group have been experiencing weird build issues. Every time they run the project, they have to re-build all of the assets. This happens regardless of whether any changes were made, even if they just run the project directly after building. I've taken a few steps to figure out why this is happening. Below is the MSBuild output set on Normal verbosity. The seemingly important part is at 4, with the line 4> Rebuilding all content because build settings have changed 1>------ Build started: Project: Engine.Core, Configuration: Debug x86 ------ 1>Build started 11/29/2012 3:24:24 AM. 1>ResolveAssemblyReferences: 1> A TargetFramework profile exclusion list will be generated. 1>EmbedXnaFrameworkRuntimeProfile: 1>Skipping target "EmbedXnaFrameworkRuntimeProfile" because all output files are up-to-date with respect to the input files. 1>GenerateTargetFrameworkMonikerAttribute: 1>Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files. 1>CoreCompile: 1>Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. 1>XnaWriteCacheFile: 1>Skipping target "XnaWriteCacheFile" because all output files are up-to-date with respect to the input files. 1>_CopyOutOfDateSourceItemsToOutputDirectoryAlways: 1> Copying file from "<solution-dir>\src\Engine.Core\DialoguePrototypeTestDB.s3db" to "bin\x86\Debug\DialoguePrototypeTestDB.s3db". 1>_CopyAppConfigFile: 1>Skipping target "_CopyAppConfigFile" because all output files are up-to-date with respect to the input files. 1>CopyFilesToOutputDirectory: 1> Engine.Core -> <solution-dir>\src\Engine.Core\bin\x86\Debug\TimeSink.Engine.Core.dll 1> 1>Build succeeded. 1> 1>Time Elapsed 00:00:00.13 2>------ Build started: Project: TimeSink.Entities, Configuration: Debug x86 ------ 2>Build started 11/29/2012 3:24:25 AM. 2>ResolveAssemblyReferences: 2> A TargetFramework profile exclusion list will be generated. 2>EmbedXnaFrameworkRuntimeProfile: 2>Skipping target "EmbedXnaFrameworkRuntimeProfile" because all output files are up-to-date with respect to the input files. 2>GenerateTargetFrameworkMonikerAttribute: 2>Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files. 2>CoreCompile: 2>Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. 2>XnaWriteCacheFile: 2>Skipping target "XnaWriteCacheFile" because all output files are up-to-date with respect to the input files. 2>_CopyOutOfDateSourceItemsToOutputDirectoryAlways: 2> Copying file from "<solution-dir>\src\Engine.Core\DialoguePrototypeTestDB.s3db" to "bin\x86\Debug\DialoguePrototypeTestDB.s3db". 2>CopyFilesToOutputDirectory: 2> TimeSink.Entities -> <solution-dir>\src\TimeSink.Entities\bin\x86\Debug\TimeSink.Entities.dll 2> 2>Build succeeded. 2> 2>Time Elapsed 00:00:00.11 3>------ Build started: Project: Editor (Editor\Editor), Configuration: Debug x86 ------ 4>------ Build started: Project: Engine.Game, Configuration: Debug x86 ------ 3>Build started 11/29/2012 3:24:25 AM. 3>CoreCompile: 3> All content is already up to date 3>ResolveAssemblyReferences: 3> A TargetFramework profile exclusion list will be generated. 3>EmbedXnaFrameworkRuntimeProfile: 3>Skipping target "EmbedXnaFrameworkRuntimeProfile" because all output files are up-to-date with respect to the input files. 3>GenerateTargetFrameworkMonikerAttribute: 3>Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files. 3>CoreCompile: 3>Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. 3>XnaWriteCacheFile: 3>Skipping target "XnaWriteCacheFile" because all output files are up-to-date with respect to the input files. 3>_CopyOutOfDateSourceItemsToOutputDirectoryAlways: 3> Copying file from "<solution-dir>\src\Engine.Core\DialoguePrototypeTestDB.s3db" to "bin\x86\Debug\DialoguePrototypeTestDB.s3db". 3>_CopyOutOfDateNestedContentItemsToOutputDirectory: 3>Skipping target "_CopyOutOfDateNestedContentItemsToOutputDirectory" because all output files are up-to-date with respect to the input files. 3>CopyFilesToOutputDirectory: 3> Editor -> <solution-dir>\src\Editor\Editor\bin\x86\Debug\Editor.dll 3> 3>Build succeeded. 3> 3>Time Elapsed 00:00:00.39 4>Build started 11/29/2012 3:24:25 AM. 4>CoreCompile: 4> Rebuilding all content because build settings have changed 4> Building Textures\circle.png -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\circle.xnb 4> Importing Textures\circle.png with Microsoft.Xna.Framework.Content.Pipeline.TextureImporter 4> Processing Textures\circle.png with Microsoft.Xna.Framework.Content.Pipeline.Processors.TextureProcessor 4> Compiling <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\circle.xnb 4> Building Textures\giroux.png -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\giroux.xnb 4> Importing Textures\giroux.png with Microsoft.Xna.Framework.Content.Pipeline.TextureImporter 4> Processing Textures\giroux.png with Microsoft.Xna.Framework.Content.Pipeline.Processors.TextureProcessor 4> Compiling <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\giroux.xnb 4> Building Textures\Body_Neutral.png -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\Body_Neutral.xnb 4> Importing Textures\Body_Neutral.png with Microsoft.Xna.Framework.Content.Pipeline.TextureImporter 4> Processing Textures\Body_Neutral.png with Microsoft.Xna.Framework.Content.Pipeline.Processors.TextureProcessor 4> Compiling <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\Body_Neutral.xnb 4> Building font.spritefont -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\font.xnb 4> Importing font.spritefont with Microsoft.Xna.Framework.Content.Pipeline.FontDescriptionImporter 4> Processing font.spritefont with Microsoft.Xna.Framework.Content.Pipeline.Processors.FontDescriptionProcessor 4> Compiling <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\font.xnb 4>ResolveAssemblyReferences: 4> A TargetFramework profile exclusion list will be generated. 4>EmbedXnaFrameworkRuntimeProfile: 4>Skipping target "EmbedXnaFrameworkRuntimeProfile" because all output files are up-to-date with respect to the input files. 4>GenerateTargetFrameworkMonikerAttribute: 4>Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files. 4>CoreCompile: 4>Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. 4>_CopyOutOfDateSourceItemsToOutputDirectoryAlways: 4> Copying file from "<solution-dir>\src\Engine.Core\DialoguePrototypeTestDB.s3db" to "bin\x86\Debug\DialoguePrototypeTestDB.s3db". 4>_CopyOutOfDateNestedContentItemsToOutputDirectory: 4>Skipping target "_CopyOutOfDateNestedContentItemsToOutputDirectory" because all output files are up-to-date with respect to the input files. 4>_CopyAppConfigFile: 4>Skipping target "_CopyAppConfigFile" because all output files are up-to-date with respect to the input files. 4>CopyFilesToOutputDirectory: 4> Engine.Game -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Engine.Game.exe 4>IncrementalClean: 4> Deleting file "<solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\circle.xnb". 4> Deleting file "<solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\giroux.xnb". 4> Deleting file "<solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Body_Neutral.xnb". 4> Deleting file "<solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\font.xnb". 4> 4>Build succeeded. 4> 4>Time Elapsed 00:00:01.72 ========== Build: 4 succeeded, 0 failed, 1 up-to-date, 0 skipped ========== I can't think of how build settings could change between consecutive executions. Like I said, this only happens for half our group. One member is on a 32-bit Windows 7 Prof bootcamp partition on a Mac. Everyone else, including those who don't have the issue, are running straight 64-bit Windows 7 Prof. Both have tried using VS 2010 and VS 2012. Any insight would be greatly appreciated. Also, I can post more details upon request if this isn't thorough enough.

    Read the article

  • Fork dead SVN based project on GitHub

    - by Quinn Bailey
    I previously asked this at stack overflow but it was closed, I believe because 'programmers' is a more appropriate venue for this question. I have done some work on the SVN Importer project (Apache license), which appears to be effectively dead (no published changes in 5 years). I have a login to their svn server but do not have commit rights. At any rate, I'd like to convert this project to Git and push my own changes to GitHub. The GitHub site suggests the svn2git tool for converting svn projects to Git, so I was planning to convert the SVN repository to Git, add my changes, and then push this Git repository to GitHub. I'm wondering, what are the legal requirements and common conventions of this process? Is it acceptable to clone the entire history of the project and move it to GitHub? Also, even though this is essentially a dead project, once I've translated the repository to Git should I put all of my commits onto a non master branch or is it acceptable to use master in this case?

    Read the article

  • how to find available wireless networks

    - by Quinn
    I'm using an HP Pavilion dv6000 I've looked at other answers similar to this question how ever when I look at my network symbol it doesn't say anything that the answer below says "Make sure that your wifi hardware switch is on or not. It is either F2 or F12 or near to it. Once the switch is enabled, there is a small fan-like applet on the top panel (Gnome Network Manager), fourth from the right. Click on it and if there is no tick mark on the option 'Enable Wireless', enable it. Wait till your wifi connection name appears." it how says 'Enable Networking' my wi-fi switch is on and I've tried using terminal to kill the applet as another answer suggests trying. Does anyone have any other ideas that might help? Just in case anybodies curious as to how I'm posting this I'm on my other ubuntu laptop that's running an older version.

    Read the article

  • URL conventions for Maps on Windows Phone 7

    - by Stan Wiechers
    What is the best practice for opening a map from the mobile internet explorer on windows phone 7? On BlackBerry you use a JavaScript method and on Android/iOS you simply link to a google maps URL. I am planning to integrate the different ways of opening maps into my mobile geo javascript library and don't have a windows phone device. http://code.google.com/p/geo-location-javascript/ Thanks, Stan Wiechers

    Read the article

  • Looking for way to log process terminations on OS X (Mac)

    - by Stan Sieler
    I'm looking for a way to log all process terminations on my Mac (OS X 10.6.8). (And see pid, timestamp, process name) I've implemented something similar for HP-UX, but it required a kernel-level driver and intercepting several variations of "exit()" (the normal one, and the one invoked on behalf of a process while it's aborting). Why do I want the info? I've been seeing messages in my system log file (dmesg) like: CODE SIGNING: cs_invalid_page(0x1000): p=91550[GoogleSoftwareUp] clearing CS_VALID CODE SIGNING: cs_invalid_page(0x1000): p=92088[GoogleSoftwareUp] clearing CS_VALID Although dmesg lacks timestamps, apps/Utilities/Console : Database : all : search for CS_VALID shows that the messages appears about once every 58 1/2 minutes. I suspect the number after "p=" is a process id (pid) ... but for a process that has long since terminated by the time I see the message. So, if there was a process termination log mechanism that recorded the pid, the time of termination, the reason for termination, and the process name (at time of termination), that would probably allow me to determine who's causing those errors to be logged! (No, I'm not running Chrome on my Mac, and "ps -ef | grep -i goog" gets no hits either ... I'm not consciously running any Google apps on the Mac) thanks, Stan [email protected]

    Read the article

  • How to Obtain Data to Pre-Populate Forms.

    - by Stan
    The objective is to have a form reflect user's defined constraints on a search. At first, I relied entirely upon server-side scripting to achieve this; recently I tried to shift the functionality to JavaScript. On the server side, the search parameters are stored in a ColdFusion struct which makes it particularly convenient to have the data JSON'ed and sent to the client. Then it's just a matter of separately iterating over 'checkable' and text fields to reflect the user's search parameters; jQuery proved to be exceptionally effective in simplifying the workload. One observable difference lies in performance. The second method appeared to be somewhat slower and didn't work in IE8. Evidently, the returned JSON'ed struct was seen as an empty object. I'm sure it can be fixed, though before spending any more time with it, I'm curious to hear how others would approach the task. I'd gladly appreciate any suggestions. --Stan

    Read the article

  • json encodes aray

    - by Stan Forrest
    Okay I have been struggling with this for hours. What I am doing is creating array of what I call objects that can be moved around on a calendar. Below is my code $year = date('Y'); $month = date('m'); echo json_encode(array( array( 'id' => 111, 'title' => "Event3", 'start' => "$year-$month-10", 'url' => "http://domain.com/" ), array( 'id' => 222, 'title' => "Event2", 'start' => "$year-$month-20", 'end' => "$year-$month-22", 'url' => "http://domain.com/" ) )); Now here is my problem. I need to loop through a mysql database to retrieve the information for each object. For some reason I can't get this to work. Please help Thanks Stan

    Read the article

  • I’m a Phoenix… and I’m miffed

    - by Stan Spotts
    For personal reasons, almost 30 years ago I left school to enter the workforce. I decided late 2008 to go back to school and finish my degree. After the expected loss of credits for a transfer, from Temple University to University of Phoenix, I'm now about 75% done. The experience has been interesting. Classes are time compressed, only 5 weeks each. Because I have a family and a full time job, I'm taking one at a time. Even so, I've written more papers in these classes than I ever wrote at Temple. My own papers are one thing, but the team papers give me heartburn since I can't completely control what goes into them. Not a big deal except that they make up 30% of our grade. In any case, most of the class facilitators have been great. I had great ones for Accounting, Finance, and frankly most others. I've had a few (4, maybe) cases where I was less than 2 points from an A, and asked the facilitator if I could get any of my work reviewed to see if I could get those extra points. I figured it was worth a shot, and there were no extenuating circumstances to help make my case. I think that only one facilitator decided after a review of one paper that my interpretation was good, just not what he expected, and gave me another point, which gave me an A. So while none are pushovers, they've all been open to discussion, which is as much as I should expect. Overall, good experience. That is, until my last class. On the second week, the day I was due to hand in my personal assignment for the week, I was in an accident. An SUV creamed my little Ford Focus, and totaled it (estimated repair over $11K). I was pretty banged up, especially my left shoulder. I was scheduled for rotator cuff surgery for two weeks later, and getting hit against the door really made it worse. After dealing with the police, the EMT, the tow truck, and the Percocet and Flexeril for the pain, I crashed for the night and didn't get to upload my paper until the next day. The instructor took 30% off for it being late, even after I supplied photos of the car, my arm (huge bruises), and offered to supply the police report number. I figured I'd be okay since that's 2.7 points, and I could lose up to 5 before jeopardizing an A grade. Well, that wasn't the case as we lost more points than I expected on our team paper in Week 5. I ended up with a 94.3. Yes, 7/10 of a point from an A. Of course I asked the instructor to review the issue with the accident and give me just the 0.7 points I needed for the A. That got me a short response of "I have received your emails and review your work over the last five weeks. Your current grade will stand. If you would like to dispute your grade then please feel free to contact your academic advisor. I wish you much success in your professional and academic career." Brrrr….! So I asked my academic advisor to file a dispute. If it wasn't that a pretty bad car accident was the cause, I wouldn't have. Without the grade reduction, I would have had a 97 for the class, so I'll argue that I was performing at the A level throughout the class. Why her purported "review" of my work didn't then warrant such a minor adjustment, I don't know. An A- drops my GPA, and this ticked me off. Now I have to wait and see what the school says about the grade dispute.

    Read the article

  • Annoying security "feature" in Windows 2008 R2 burns me, but not DVD's

    - by Stan Spotts
    This stuff drives me nuts. I'm all for hardening servers, and reducing security footprints, but I always want the option to allow me to get work done versus securing my system. I use Windows Server 2008 R2 as my laptop OS for a number of reasons I don't need to review here. It's pimped out to work like Windows 7 for most things. But my DVD writer is crippled, and evidently it's on purpose: http://blogs.technet.com/askcore/archive/2010/02/19/windows-server-2008-r2-no-recording-tab-for-cd-dvd-burner.aspx I don't WANT to log in as the local administrator to burn a damned DVD.  WTF isn't this configurable through the registry, or better yet, group policy? There are no security settings that I should not have the option to enable or disable.

    Read the article

  • Collisions not working as intended

    - by Stan
    I'm making a game, it's a terraria-like game, with 20x20 blocks, and you can place and remove those blocks. Now, I am trying to write collisions, but it isn't working as I want, the collision succesfully stops the player from going through the ground, but, when I press a key like A + S, that means if I walk down and left (Noclip is on atm), my player will go into the ground, bug up, and exit the ground somewhere else in the level. I made a video of it. The red text means which buttons I am pressing. http://www.youtube.com/watch?v=mo4frZyNwOs You see, if I press A and S together, I go into the ground. Here is my collision code: Vector2 collisionDist, normal; private bool IsColliding(Rectangle body1, Rectangle body2) { normal = Vector2.Zero; Vector2 body1Centre = new Vector2(body1.X + (body1.Width / 2), body1.Y + (body1.Height / 2)); Vector2 body2Centre = new Vector2(body2.X + (body2.Width / 2), body2.Y + (body2.Height / 2)); Vector2 distance, absDistance; float xMag, yMag; distance = body1Centre - body2Centre; float xAdd = ((body1.Width) + (body2.Width)) / 2.0f; float yAdd = ((body1.Height) + (body2.Height)) / 2.0f; absDistance.X = (distance.X < 0) ? -distance.X : distance.X; absDistance.Y = (distance.Y < 0) ? -distance.Y : distance.Y; if (!((absDistance.X < xAdd) && (absDistance.Y < yAdd))) return false; xMag = xAdd - absDistance.X; yMag = yAdd - absDistance.Y; if (xMag < yMag) normal.X = (distance.X > 0) ? xMag : -xMag; else normal.Y = (distance.Y > 0) ? yMag : -yMag; return true; } private void PlayerCollisions() { foreach (Block blocks in allTiles) { collisionDist = Vector2.Zero; if (blocks.Texture != airTile && blocks.Texture != stoneDarkTexture && blocks.Texture != stoneDarkTextureSelected && blocks.Texture != airTileSelected && blocks.Texture != doorTexture && blocks.Texture != doorTextureSelected) { if (IsColliding(player.plyRect, blocks.tileRect)) { if (normal.Length() > collisionDist.Length()) { collisionDist = normal; } player.Position.X += collisionDist.X; player.Position.Y += collisionDist.Y; break; } } } } I got PlayerCollisions() running in my Update method. As you can see it works partly, but if it runs perfectly, it would be awesome, though I have no idea how to fix this problem. Help would be greatly appreciated. EDIT: If I remove the break; it works partly, then it is just the thing that it spasms when it hits two or more blocks at once, like, if I touch 2/3 blocks at once, it does twice the force up. How can I make it so that it only does the force for one block, so it stays correct, and does not spasm? Thanks.

    Read the article

  • Can I disallow printing with parent controls on Snow Leopard?

    - by Quinn Taylor
    I have two children under 4 who are quite computer-savvy, and have their own account managed by parental controls to restrict what they can do an see. However, I haven't found a way to disallow them from printing, and I'm looking for a way do so. Their pictures of Sesame Street and Word World are cute and all, but I'd like to be in control of what (or even if) they print. (Our printer is connected wirelessly, not directly to the Mac.) I know I can add more time or authorize use of a given application by providing my password — can I do something similar for printing, such as approving or denying particular print jobs?

    Read the article

  • Have an unprivileged non-account user ssh into another box?

    - by Daniel Quinn
    I know how to get a user to ssh into another box with a key: ssh -l targetuser -i path/to/key targethost But what about non-account users like apache? As this user doesn't have a home directory to which it can write a .ssh directory, the whole thing keeps failing with: $ sudo -u apache ssh -o StrictHostKeyChecking=no -l targetuser -i path/to/key targethost Could not create directory '/var/www/.ssh'. Warning: Permanently added '<hostname>' (RSA) to the list of known hosts. Permission denied (publickey). I've tried variations using -o UserKnownHostsFile=/dev/null and setting $HOME to /dev/null and none of these have done the trick. I understand that sudo could probably fix this for me, but I'm trying to avoid having to require a manual server config since this code will be deployed on a number of different environments. Any ideas? Here's a few examples of what I've tried that don't work: $ sudo -u apache export HOME=path/to/apache/writable/dir/ ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=path/to/apache/writable/dir/.ssh/known_hosts -l deploy -i path/to/key targethost $ sudo -u apache ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=path/to/apache/writable/dir/.ssh/known_hosts -l deploy -i path/to/key targethost $ sudo -u apache ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -l deploy -i path/to/key targethost Eventually, I'll be using this solution to run rsync as the apache user.

    Read the article

  • How to configure Dovecot to not serve large emails to high-latency clients?

    - by Daniel Quinn
    I have a Dovecot mailserver running at home on a flaky cable connection. For the most part, the IMAP functionality works beautifully, but I'd like to add one feature if I can: I want Dovecot not to serve large messages to high-latency clients. That is to say, if someone decides that it's a good idea to send me a 9.3mb email to me, I don't want to get it unless I'm on my LAN at home. This can't be an uncommon request, but I'm having trouble finding the configuration option in their documentation. Any ideas and/or good keywords to use in Googling would be awesome.

    Read the article

  • Weird console problem in linux, usually right before OOM

    - by Kevin Quinn
    So I've noticed this happen more than once. If I remember correctly, this usually happens right before OOM, and/or kernel panic that if you type into a tty and then try to backspace it, the same characters are printed back in reverse. This has been merely an interesting oddity to me in the past, but it happened again recently, and I've gotten more curious about what's actually causing that. (Is it sending the characters back to STD_OUT or something?) Does anyone have any idea? I have a feeling the answer will be interesting. Just so I'm clear, if you typed hello world, then tried to backspace it: hello world..dlrow olleh

    Read the article

  • How is it possible that I can do a host lookup but not a curl?

    - by Daniel Quinn
    Has anyone ever seen this before? Note that this happens not only with google.com, but with every domain I try. It's a wireless connection (WEP), but I'm not sure how that would be relevant: $ curl -v google.com # This takes about 60s to return * getaddrinfo(3) failed for google.com:80 * Couldn't resolve host 'google.com' * Closing connection #0 curl: (6) Couldn't resolve host 'google.com' $ host google.com google.com has address 209.85.148.106 google.com has address 209.85.148.147 google.com has address 209.85.148.99 google.com has address 209.85.148.103 google.com has address 209.85.148.104 google.com has address 209.85.148.105 google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. $ cat /etc/resolv.conf # Generated by NetworkManager nameserver 192.168.1.201 $ cat /etc/hosts 127.0.0.1 localhost ::1 localhost $ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 wlan0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0

    Read the article

  • EntLib 5 install gets error “The system administrator has set policies to prevent this installation.

    - by Stan Spotts
    I got this when I tried to install the source code on Windows Server 2008 R2, and this was an issue with EntLib 4.0 as well. The solution is the same now as it was then, but since I had a new OS install I didn't recreate the fix. I had to add a registry key: DisableMSI REG_DWORD value 0 It goes here: HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer The description for this key is here: http://msdn.microsoft.com/en-us/library/aa368304(VS.85).aspx

    Read the article

  • Heartbeat/DRBD failover didn't work as expected. How do I make the failover more robust?

    - by Quinn Murphy
    I had a scenario where a DRBD-heartbeat set up had a failed node but did not failover. What happened was the primary node had locked up, but didn't go down directly (it was inaccessible via ssh or with the nfs mount, but it could be pinged). The desired behavior would have been to detect this and failover to the secondary node, but it appears that since the primary didn't go full down (there is a dedicated network connection from server to server), heartbeat's detection mechanism didn't pick up on that and therefore didn't failover. Has anyone seen this? Is there something that I need to configure to have more robust cluster failover? DRBD seems to otherwise work fine (had to resync when I rebooted the old primary), but without good failover, it's use is limited. heartbeat 3.0.4 drbd84 RHEL 6.1 We are not using Pacemaker nfs03 is the primary server in this setup, and nfs01 is the secondary. ha.cf # Hearbeat Logging logfacility daemon udpport 694 ucast eth0 192.168.10.47 ucast eth0 192.168.10.42 # Cluster members node nfs01.openair.com node nfs03.openair.com # Hearbeat communication timing. # Sets the triggers and pulse time for swapping over. keepalive 1 warntime 10 deadtime 30 initdead 120 #fail back automatically auto_failback on and here is the haresources file: nfs03.openair.com IPaddr::192.168.10.50/255.255.255.0/eth0 drbddisk::data Filesystem::/dev/drbd0::/data::ext4 nfs nfslock

    Read the article

  • Two domains accessing same folder

    - by Liam Quinn
    I've just taken a new role in a school and am still familiarizing myself with their network, how ever I have recently been given a task and I'm having a little trouble finding out the fundementals of it. I have an admin network/domain 10.49.x.x and a classroom network/domian 192.168.1.x both connect to a Proxy server 10.49.202.231/192.168.1.51. Each domain has it's own shared folders as you'd expect, files and software installs etc, how ever there is a folder "staff" on the classroom network that all the teachers on the classroom network can access. The users on the admin network would like to access this same folder. How do I go about making this happen?

    Read the article

  • tmux: unbind C-[ as a prefix

    - by StanAngeloff
    I have a fairly straight forward .tmux.conf file which does nothing more but to define a couple of options, such as history-limit. I have not added any custom key bindings yet. I find it extremely annoying that I cannot unbind C-[ as a prefix in tmux. Here is what I mean: $ uname -a Linux stan-inspiron 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ tmux [0] 0:~* "stan-inspiron" 10:05 12-Jun-12 % vim Whilst inside vim, when I go to insert mode and then use C-[0 to escape insert mode and move to the first character on the line, tmux grabs the key first and complains: Window not found: :0 ** I tried all sorts of things in my .tmux.conf, but nothing works. I thought it might be a terminal or shell issue, but confirmed same behaviour on a configless machine using Bash and [Gnome] Terminal. So the question really is, how do I unbind the C-[ key from tmux? ** I have base-index 1 set.

    Read the article

  • Suspending my laptop breaks ethernet over firewire, are there commands which can fix it?

    - by Josh
    As mentioned in this question I am using a firewire cable to provide a private network between my laptop and my desktop, because it makes using the screen sharing program synergy much nicer than using WIFI. However when I leave my office for the day and I suspend my laptop, when I return the next day, the desktop and the laptop cannot communicate over firewire anymore. The firewire0 device still has an IP address. but when I try and ping the desktop I get no route to host I'm using kernel 2.6.35-24-generic #42-Ubuntu SMP x86_64 on Ubuntu 10.10. Is there some way I can remedy this without a reboot? Like, removing some kernel modules and re-inserting them? Here's what I have tried so far and the results: root@token:~# dmesg|tail -n 1 [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 root@token:~# modprobe -r firewire_net firewire_ohci firewire_core root@token:~# modprobe -v firewire_ohci insmod /lib/modules/2.6.35-24-generic/kernel/lib/crc-itu-t.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-core.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-ohci.ko root@token:~# dmesg|tail [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592563.410868] firewire_ohci: Removed fw-ohci device. [592579.160086] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [592579.160137] firewire_ohci: isochronous cycle inconsistent [592579.660294] firewire_core: created device fw0: GUID 0000000000000000, S400 [592579.663805] firewire_core: created device fw1: GUID 0017f2fffe89bce6, S400 [592579.663813] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700720] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700842] firewire_core: refreshed device fw0 [592579.702603] firewire_net: firewire0: IPv4 over FireWire on device 0000000000000000 root@token:~# ping stan.firewire PING stan.firewire (192.168.100.1) 56(84) bytes of data. From token.local (192.168.100.3) icmp_seq=1 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=2 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=3 Destination Host Unreachable I also tried removing the modules prior to suspending, and re-inserting after resuming. This did not work either :-(

    Read the article

  • Compiling Asterisk 1.6.2 on MacOSX Server

    - by Jeremy Quinn
    I get this error while trying to compile Asterisk 1.6.2 on Snow Leopard Server : ld: symbol dyld_stub_binding_helper not defined (usually in crt1.o/dylib1.o/bundle1.o) Googling this I’ve found nothing enlightening so far. This is what I am trying: ./configure --without-h323 --without-zaptel --host=x86_64-darwin make menuselect make

    Read the article

  • CATiledLayer: Determining levelsOfDetail when in drawLayer

    - by Russell Quinn
    I have a CATiledLayer inside a UIScrollView and all is working fine. Now I want to add support for showing different tiles for three levels of zooming. I have set levelsOfDetail to 3 and my tile size is 300 x 300. This means I need to provide three sets of tiles (I'm supplying PNGs) to cover: 300 x 300, 600 x 600 and 1200 x 1200. My problem is that inside "(void)drawLayer:(CALayer *)layer inContext:(CGContextRef)ctx" I cannot work out which levelOfDetail is currently being drawn. I can retrieve the bounds currently required by using CGContextGetClipBoundingBox and usually this requests a rect for one of the above sizes, but at layer edges the tiles are usually smaller and therefore this isn't a good method. Basically, if I have set levelsOfDetail to 3, how do I find out if drawLayer is requesting level 1, 2 or 3 when it's called? Thanks, Russell.

    Read the article

1 2 3 4 5 6 7 8 9  | Next Page >