Search Results

Search found 1470 results on 59 pages for 'suspend resume'.

Page 1/59 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Why does my laptop resume immediately after suspend?

  - by Igor Zinov'yev

  I seem to be having some problem with suspend mode. Every time I try to suspend my laptop, it just locks the screen. Or maybe it successfully suspends just to resume only an instant after. What could cause such a behaviour? I'm running 32-bit Ubuntu 12.04 with the 3.2.0-25 kernel on a HP dv5-1178er Pavilion laptop (Intel Core 2 Duo). Here are the relevant log sections: kern.log: Jun 1 10:42:21 igor-laptop kernel: [ 2225.131171] PM: Syncing filesystems ... done. Jun 1 10:42:21 igor-laptop kernel: [ 2225.141222] PM: Preparing system for mem sleep Jun 1 10:42:21 igor-laptop kernel: [ 2225.141239] Freezing user space processes ... (elapsed 0.01 seconds) done. Jun 1 10:42:21 igor-laptop kernel: [ 2225.156171] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Jun 1 10:42:21 igor-laptop kernel: [ 2225.172139] PM: Entering mem sleep Jun 1 10:42:21 igor-laptop kernel: [ 2225.172169] Suspending console(s) (use no_console_suspend to debug) Jun 1 10:42:21 igor-laptop kernel: [ 2225.172895] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jun 1 10:42:21 igor-laptop kernel: [ 2225.181767] sd 0:0:0:0: [sda] Stopping disk Jun 1 10:42:21 igor-laptop kernel: [ 2225.251089] ene_ir 00:0a: wake-up capability enabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.251115] i8042 aux 00:09: wake-up capability disabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.251133] i8042 kbd 00:08: wake-up capability enabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.251286] jmb38x_ms 0000:06:00.3: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.252491] sdhci-pci 0000:06:00.1: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.264130] uhci_hcd 0000:00:1d.2: PCI INT D disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.264142] uhci_hcd 0000:00:1d.1: PCI INT B disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.264325] uhci_hcd 0000:00:1a.1: PCI INT B disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.288059] uhci_hcd 0000:00:1a.0: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.288097] uhci_hcd 0000:00:1d.3: PCI INT C disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.288135] uhci_hcd 0000:00:1d.0: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.316051] ehci_hcd 0000:00:1d.7: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.316068] ehci_hcd 0000:00:1a.7: PCI INT D disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.522872] PM: suspend of drv:sd dev:0:0:0:0 complete after 349.979 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.522901] PM: suspend of drv:scsi dev:target0:0:0 complete after 349.955 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.522927] PM: suspend of drv:scsi dev:host0 complete after 272.260 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.522969] ahci 0000:00:1f.2: BIOS update required for suspend/resume Jun 1 10:42:21 igor-laptop kernel: [ 2225.522976] pci_legacy_suspend(): ahci_pci_device_suspend+0x0/0x80 returns -5 Jun 1 10:42:21 igor-laptop kernel: [ 2225.522981] pm_op(): pci_pm_suspend+0x0/0x110 returns -5 Jun 1 10:42:21 igor-laptop kernel: [ 2225.522984] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 258.932 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.522987] PM: Device 0000:00:1f.2 failed to suspend async: error -5 Jun 1 10:42:21 igor-laptop kernel: [ 2225.576228] snd_hda_intel 0000:00:1b.0: PCI INT A disabled Jun 1 10:42:21 igor-laptop kernel: [ 2225.576270] ACPI handle has no context! Jun 1 10:42:21 igor-laptop kernel: [ 2225.592136] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 327.889 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.592206] PM: Some devices failed to suspend Jun 1 10:42:21 igor-laptop kernel: [ 2225.592291] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592298] uhci_hcd 0000:00:1a.0: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592325] usb usb3: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592339] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592345] uhci_hcd 0000:00:1a.1: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592371] usb usb4: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592387] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592395] ehci_hcd 0000:00:1a.7: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592843] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592851] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592854] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592863] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592878] usb usb5: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592892] usb usb6: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592895] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592903] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592906] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592915] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592930] usb usb7: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592946] usb usb8: root hub lost power or was reset Jun 1 10:42:21 igor-laptop kernel: [ 2225.592949] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592957] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.592963] pci 0000:00:1e.0: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.597106] sd 0:0:0:0: [sda] Starting disk Jun 1 10:42:21 igor-laptop kernel: [ 2225.608138] snd_hda_intel 0000:00:1b.0: BAR 0: set to [mem 0xdf300000-0xdf303fff 64bit] (PCI address [0xdf300000-0xdf303fff]) Jun 1 10:42:21 igor-laptop kernel: [ 2225.608180] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) Jun 1 10:42:21 igor-laptop kernel: [ 2225.608233] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) Jun 1 10:42:21 igor-laptop kernel: [ 2225.608248] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) Jun 1 10:42:21 igor-laptop kernel: [ 2225.608299] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Jun 1 10:42:21 igor-laptop kernel: [ 2225.608313] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.608420] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X Jun 1 10:42:21 igor-laptop kernel: [ 2225.612095] firewire_ohci 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) Jun 1 10:42:21 igor-laptop kernel: [ 2225.612181] sdhci-pci 0000:06:00.1: restoring config space at offset 0x1 (was 0x100003, writing 0x100007) Jun 1 10:42:21 igor-laptop kernel: [ 2225.612211] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jun 1 10:42:21 igor-laptop kernel: [ 2225.612225] sdhci-pci 0000:06:00.1: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.612296] jmb38x_ms 0000:06:00.3: restoring config space at offset 0x1 (was 0x100003, writing 0x100007) Jun 1 10:42:21 igor-laptop kernel: [ 2225.612326] jmb38x_ms 0000:06:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jun 1 10:42:21 igor-laptop kernel: [ 2225.612332] jmb38x_ms 0000:06:00.3: setting latency timer to 64 Jun 1 10:42:21 igor-laptop kernel: [ 2225.699170] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 101.965 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.699179] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 101.932 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.699186] PM: resume of drv: dev:ep_00 complete after 101.917 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.699197] PM: resume of drv: dev:ep_83 complete after 101.972 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716148] PM: resume of drv:hub dev:3-0:1.0 complete after 119.543 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716155] PM: resume of drv: dev:ep_00 complete after 119.544 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716161] PM: resume of drv:hub dev:5-0:1.0 complete after 119.420 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716168] PM: resume of drv: dev:ep_00 complete after 119.381 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716174] PM: resume of drv:hub dev:8-0:1.0 complete after 119.141 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716181] PM: resume of drv: dev:ep_00 complete after 119.104 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716186] PM: resume of drv: dev:ep_81 complete after 119.579 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716191] PM: resume of drv: dev:ep_81 complete after 119.427 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.716197] PM: resume of drv: dev:ep_81 complete after 119.143 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.747148] firewire_core: skipped bus generations, destroying all nodes Jun 1 10:42:21 igor-laptop kernel: [ 2225.776093] PM: resume of drv:hp_accel dev:HPQ0004:00 complete after 167.225 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.777243] i8042 kbd 00:08: wake-up capability disabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.777278] ene_ir 00:0a: wake-up capability disabled by ACPI Jun 1 10:42:21 igor-laptop kernel: [ 2225.820100] PM: resume of drv:hub dev:4-0:1.0 complete after 223.436 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820115] PM: resume of drv: dev:ep_00 complete after 223.444 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820123] PM: resume of drv: dev:ep_81 complete after 223.456 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820206] PM: resume of drv:hub dev:7-0:1.0 complete after 223.266 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820221] PM: resume of drv: dev:ep_81 complete after 223.260 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820238] PM: resume of drv: dev:ep_00 complete after 223.255 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820295] PM: resume of drv:hub dev:6-0:1.0 complete after 223.453 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820302] PM: resume of drv: dev:ep_00 complete after 223.415 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.820321] PM: resume of drv: dev:ep_81 complete after 223.457 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2225.932108] usb 4-2: reset full-speed USB device number 2 using uhci_hcd Jun 1 10:42:21 igor-laptop kernel: [ 2226.086714] PM: resume of drv:usbhid dev:4-2:1.0 complete after 489.393 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.086728] PM: resume of drv: dev:ep_81 complete after 489.384 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.086745] PM: resume of drv: dev:ep_00 complete after 489.329 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.086753] PM: resume of drv:usbhid dev:4-2:1.1 complete after 489.384 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.086764] PM: resume of drv: dev:ep_82 complete after 489.373 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.180555] usb 7-2: reset full-speed USB device number 2 using uhci_hcd Jun 1 10:42:21 igor-laptop kernel: [ 2226.244858] firewire_core: rediscovered device fw0 Jun 1 10:42:21 igor-laptop kernel: [ 2226.335066] btusb 7-2:1.0: no reset_resume for driver btusb? Jun 1 10:42:21 igor-laptop kernel: [ 2226.335068] btusb 7-2:1.1: no reset_resume for driver btusb? Jun 1 10:42:21 igor-laptop kernel: [ 2226.432082] usb 6-1: reset full-speed USB device number 2 using uhci_hcd Jun 1 10:42:21 igor-laptop kernel: [ 2226.578280] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 985.301 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584296] PM: resume of drv:usb dev:7-2:1.0 complete after 986.693 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584308] PM: resume of drv: dev:ep_00 complete after 986.452 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584311] PM: resume of drv:usb dev:7-2:1.1 complete after 986.616 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584315] PM: resume of drv:usb dev:7-2:1.3 complete after 986.483 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584320] PM: resume of drv:usb dev:7-2:1.2 complete after 986.556 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584328] PM: resume of drv: dev:ep_03 complete after 986.588 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584331] PM: resume of drv: dev:ep_81 complete after 986.704 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584334] PM: resume of drv: dev:ep_83 complete after 986.617 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584337] PM: resume of drv: dev:ep_82 complete after 986.688 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584340] PM: resume of drv: dev:ep_02 complete after 986.667 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584344] PM: resume of drv: dev:ep_84 complete after 986.558 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.584352] PM: resume of drv: dev:ep_04 complete after 986.542 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590883] PM: resume of drv: dev:ep_00 complete after 993.327 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590887] PM: resume of drv:usb dev:6-1:1.0 complete after 993.424 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590927] PM: resume of drv: dev:ep_82 complete after 993.395 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590934] PM: resume of drv: dev:ep_81 complete after 993.426 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.590940] PM: resume of drv: dev:ep_01 complete after 993.456 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.592450] PM: resume of drv:sd dev:0:0:0:0 complete after 995.343 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.592461] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 802.688 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.592472] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 995.324 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.600339] PM: resume of devices complete after 1008.129 msecs Jun 1 10:42:21 igor-laptop kernel: [ 2226.601293] PM: resume devices took 1.008 seconds Jun 1 10:42:21 igor-laptop kernel: [ 2226.601330] PM: Finishing wakeup. Jun 1 10:42:21 igor-laptop kernel: [ 2226.601332] Restarting tasks ... done. Jun 1 10:42:21 igor-laptop kernel: [ 2226.625660] video LNXVIDEO:01: Restoring backlight state Jun 1 10:42:22 igor-laptop kernel: [ 2227.478921] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S Jun 1 10:42:22 igor-laptop kernel: [ 2227.481981] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 Jun 1 10:42:22 igor-laptop kernel: [ 2227.527727] ADDRCONF(NETDEV_UP): wlan0: link is not ready Jun 1 10:42:22 igor-laptop kernel: [ 2227.532468] r8169 0000:03:00.0: eth0: link down Jun 1 10:42:22 igor-laptop kernel: [ 2227.533967] ADDRCONF(NETDEV_UP): eth0: link is not ready pm_suspend.log: Fri Jun 1 10:42:14 MSK 2012: Running hooks for suspend. Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux igor-laptop 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:33:05 UTC 2012 i686 i686 i386 GNU/Linux Module Size Used by pci_stub 12550 1 vboxpci 22882 0 vboxnetadp 13328 0 vboxnetflt 27211 0 vboxdrv 252189 3 vboxpci,vboxnetadp,vboxnetflt dm_crypt 22528 0 snd_hda_codec_hdmi 31775 1 snd_hda_codec_idt 60251 1 arc4 12473 2 hp_wmi 13652 0 sparse_keymap 13658 1 hp_wmi rfcomm 38139 12 snd_hda_intel 32765 5 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec bnep 17830 2 btusb 17912 2 bluetooth 158438 23 rfcomm,bnep,btusb joydev 17393 0 parport_pc 32114 0 snd_pcm 80845 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec ppdev 12849 0 uvcvideo 67203 0 binfmt_misc 17292 1 videodev 86588 1 uvcvideo snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi nvidia 10958194 43 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq ir_mce_kbd_decoder 12681 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 ir_rc6_decoder 12459 0 psmouse 87213 0 ir_rc5_decoder 12459 0 serio_raw 13027 0 iwlwifi 287934 0 rc_rc6_mce 12454 0 ir_nec_decoder 12459 0 ene_ir 18019 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ene_ir mac80211 436455 1 iwlwifi snd 62064 19 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 178679 2 iwlwifi,mac80211 hp_accel 25728 0 lis3lv02d 19268 1 hp_accel input_polldev 13648 1 lis3lv02d mac_hid 13077 0 wmi 18744 1 hp_wmi jmb38x_ms 17406 0 soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm memstick 15857 1 jmb38x_ms firewire_sbp2 18346 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp vesafb 13516 1 usbhid 41906 0 hid 77367 1 usbhid firewire_ohci 40180 0 firewire_core 56906 2 firewire_sbp2,firewire_ohci crc_itu_t 12627 1 firewire_core sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci r8169 56321 0 video 19068 0 total used free shared buffers cached Mem: 3095544 2364260 731284 0 159020 1280240 -/+ buffers/cache: 925000 2170544 Swap: 1718916 0 1718916 /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: Welcome to PulseAudio! Use "help" for usage information. >>> >>> Welcome to PulseAudio! Use "help" for usage information. >>> >>> Welcome to PulseAudio! Use "help" for usage information. >>> >>> /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: success. Running hook /etc/pm/sleep.d/10_grub-common suspend suspend: /etc/pm/sleep.d/10_grub-common suspend suspend: success. Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: Having NetworkManager put all interaces to sleep...Failed. /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend: /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend: /usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/95anacron suspend suspend: stop: Unknown instance: /usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend: /usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: nVidia binary video drive detected, not using quirks. /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0 /usr/lib/pm-utils/sleep.d/99video suspend suspend: success. Running hook /etc/pm/sleep.d/novatel_3g_suspend suspend suspend: /etc/pm/sleep.d/novatel_3g_suspend suspend suspend: success. Fri Jun 1 10:42:19 MSK 2012: performing suspend Fri Jun 1 10:42:21 MSK 2012: Awake. Fri Jun 1 10:42:21 MSK 2012: Running hooks for resume Running hook /etc/pm/sleep.d/novatel_3g_suspend resume suspend: /etc/pm/sleep.d/novatel_3g_suspend resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend: /usr/lib/pm-utils/sleep.d/99video resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend: /usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: /dev/sda: setting Advanced Power Management level to 0xfe (254) APM_level = 254 /dev/sda: setting Advanced Power Management level to 0xfe (254) APM_level = 254 /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/95anacron resume suspend: /usr/lib/pm-utils/sleep.d/95anacron resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend: /usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable. Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend: Reloaded unloaded modules. /usr/lib/pm-utils/sleep.d/75modules resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: Having NetworkManager wake interfaces back up...Failed. /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success. Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: success. Running hook /etc/pm/sleep.d/10_grub-common resume suspend: /etc/pm/sleep.d/10_grub-common resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: Welcome to PulseAudio! Use "help" for usage information. >>> >>> Welcome to PulseAudio! Use "help" for usage information. >>> >>> Welcome to PulseAudio! Use "help" for usage information. >>> >>> /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend: /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend: /usr/lib/pm-utils/sleep.d/00logging resume suspend: success. Running hook /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: success. Fri Jun 1 10:42:22 MSK 2012: Finished.

  Read the article

• Suspend fails (reboot on resume) and no hibernate option

  - by Matt Kibble

  Upgraded from 10.04 to 10.10 removed hibernate option for me and introduced the problem where by after entering standby (being indicated by blinking amber LED on my laptop) I cannot resume my session. Instead I get a crash and system reboots (crash comes instantly on trying to resume). Tried clean install to eliminate possibility of an upgrade issue but its still persistent. All latest updates installed. Tried looking for an answer to this but still no joy. Laptop is Sony VGN-FW41E.

  Read the article

• Update to 13.10: blank screen and repeated suspend on resume from suspend

  - by user208026

  On my Asus x201e, after updating from 13.04 to 13.10, intermittently when awaking from suspend, my screen will blink to a black screen a few times, offers a lock screen, and then go back to suspend unexpectedly (during this it is possible to quickly login to the desktop before the system suspends again). This will repeat each time I subsequently awake it from suspend. Only a restart will escape the suspend loop. The problem only occurs when suspending by closing lid, not by manual (pm-suspend) or menu suspend. Opening the lid after a manual or menu-initiated suspend works as expected. When an external monitor is attached, the black screen and second lock screen still appear twice upon wake, but the system does not fall back into suspend (though networking is disabled and needs to be restarted). This issue arose in tandem with the already raised issue regarding networking not restarting on wake from suspend, though appears to be distinct from that issue and persists after a fix is applied for the networking issue. This issue only occurs on waking from suspend, never upon booting. And only on the second suspend cycle after reboot. This question duplicates the second, unanswered question included in this closed question and seems to correspond with this reported bug. Any ideas for a workaround?

  Read the article

• Update to 13.10: blank screen and repeated suspend on wake from suspend

  - by user208026

  After updating from 13.04 to 13.10, intermittently when awaking from suspend, my screen will blink to black screen a few times, offer a login screen, and then go back to suspend unexpectedly. This will repeat each time I subsequently awake it from suspend. Only a restart will escape the suspend loop. This issue arose in tandem with the already raised issue regarding networking not restarting on wake from suspend, though appears to be distinct from that issue.

  Read the article

• Graphics trouble after resuming from hibernate or suspend

  - by Voyagerfan5761

  I have a Dell Inspiron 2650 (with NVidia graphics, using nouveau drivers) that I'm using to try out Ubuntu. It's all great, except that Hibernate and Suspend aren't usable. Yes, I know that questions about power-save issues are rampant in the Linux support universe, but it seems that every time I find a solution it's for a very specific hardware combination and doesn't apply to me. So anyway, here goes. When I resume from either power-saving mode, I'll get graphics problems anywhere on the range from a few scattered random-colored pixels that won't change; all the way to full-screen patterns that don't change as I move the mouse, hit keys on the keyboard, or even bring up the shutdown dialog using the power button. Those full-screen issues (which may involve stripes with random pixels, partial black screen, or both) always end in me forcing the machine to shut down by holding the power button. I haven't done much testing yet to determine what severity level is most commonly associated with each mode, but I do avoid using either power-save option because of these issues. I'll add info on my hardware as I can gather it (no home internet connection, and this laptop is tethered to my desk by a dead battery and casing degradation). Please feel free to request something specific in the question comments. Hardware Info See this hardinfo report for my system's hardware configuration. (No, my username is not "myuser"; I sanitized hardinfo's output before publishing it.) Screenshots These screenshots are from a relatively mild occurrence, which happened after the second hibernation I took that session. The first one worked great, though I used the wireless card and Firefox heavily between the two hibernation attempts. Take a look at what happened when I opened my home directory in Nautilus and scrolled it: See below for the situations I've tested so far. The real trouble comes when the machine resumes to an unusable state; in such cases I can't even unlock the screen or properly reboot, much less take a screenshot. I have a hunch that putting a CD in the drive will cause such major failures, and I will try that at some point; see related question. Situations Tested Maverick (10.10) Suspend Seems to suspend nicely with nothing running Seems to suspend nicely with flash drive plugged in On resume from suspend with no flash drive, Terminal and gedit running: Funky graphics on top of log output, then blank screen with pixelated cursor; no response to power button (normally will shutdown 60 seconds later) Hibernate Seems to hibernate nicely with nothing running Seems to hibernate nicely with a few apps (Terminal, Mouse preferences) running Seems to not hibernate when flash drive plugged in Seems to not hibernate when System Monitor is running Have encountered failed hibernation (after several hours and one successful hibernate/thaw cycle) with no external media connected and no programs running except normal background stuff Natty LiveCD (11.04_2010-12-22) When I tested it, Natty wouldn't stay logged in. It played part of the login sound and then [ OK ] appeared in the top right corner (white-on-black terminal text) for a few seconds. Then it kicked me back to the Unlock screen. It did that four times before I gave up and just tested suspend from the Unlock screen. Suspend Resumed to vertical gray and black lines 2px (?) wide, then shifted to vertical "jail bars" of black over a black screen with above-described random pixels and mouse pointer. No apparent response to input from mouse (clicking randomly). Keyboard and touchpad unrecognized.

  Read the article

• How to debug suspend?

  - by mlissner

  I've been using Ubuntu for about five years now, and I still can't make it suspend when I want to. It's quite irritating that I can program up a storm, hack the machine in numerous other ways, and yet, and yet when I try to make it suspend or debug suspend, I fail miserably. I need help. Where do I begin to find the problem? What do I do to fix it? I'm placing a bounty on this, because I've literally lost hours of my life to this problem, and leaving my computer on ALL the time is terrible. The symptoms: Pressing suspend brings my computer to a state where it has a blinking cursor, the fans are running, it seems that the HD has turned off (I think), and I can't do anything to bring it back from this state (short of a hard reboot). Possibly related: My fans stay on even after a shutdown, and even then, I have to press the power button for five seconds before I can start it up again. I don't know what logs to look at to debug the problem, and I imagine they'd get nuked on reboot anyway. Please, please help. This drives me completely nuts, and I've been living with it for over a year.

  Read the article

• Laptop resumes from suspend while lid is closed

  - by Gus

  I have a Dell Studio 15 and I am running Ubuntu 10.10. When I close my lid or select the suspend option, the machine suspends as indicated by the slowly pulsing power indicator. I'll put the machine in my bag and after a while it seems that the machine resumes, at least I think. When ever I go to get it, it's overheated and the system cannot resume. I am guessing that the processor resets in this overheat condition, but heat is still generated. This has happened about three times and I'm getting worried that I'll end up damaging the machine. How can I diagnose why the system is resuming from suspend? Can I force it to never resume from suspend if the lid is down?

  Read the article

• Problem with wake after suspend using USB remote.

  - by Bod

  Hi, I'm a linux newbie looking for some help. I'm currently setting up an XBMC HTPC using a laptop and 10.10 and all works great except for waking from resume using the power button on the remote. The suspend works from remote works fine as does the resume using the power button on the laptop. I've checked /proc/acpi/wakeup which initially showed the following. Device S-state Status Sysfs node C096 S5 *disabled pci:0000:00:1e.0 C0F1 S3 *disabled pci:0000:00:1d.0 C0F8 S3 *disabled pci:0000:00:1d.1 C0F9 S3 *disabled pci:0000:00:1d.2 C0FA S3 *disabled pci:0000:00:1d.3 C0FB S3 *disabled pci:0000:00:1d.7 C102 S5 *disabled pci:0000:00:1c.0 C22B S5 *disabled pci:0000:08:00.0 C115 S5 *disabled pci:0000:00:1c.2 C22C S5 *disabled C118 S5 *disabled pci:0000:00:1c.3 C22C S5 *disabled I've since configured the above so that the S3 devices above are enabled. I've confirmed that they are the correct devices using lspci 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) None of this has worked unfortunately and I'm now stuck. It simply refuses to wakeup from the remote. The USB receiver shows no activity LED while suspended. Suspend/resume from the remote works fine from Windows 7 so I know the laptop is ok with it. Any ideas? I need to get this sorted to gain Wife Approval for this system. Thanks, Bod.

  Read the article

• Suspend and resume not working on an HP dv7

  - by Emiel

  this one is driving me nuts. My HP dv7 laptop isn't resuming from suspend and hybernate. On suspend - resume it leaves me with a black screen. On hibernate it succesfully loads the images and then it hangs.... I searched through internet and tried serveral things, but nothing seems to work for this HP dv7 on Ubuntu 12.04. With 11.10 it didn't work either. Intel® Core™ i5 CPU M 450 @ 2.40GHz × 4 VESA: Intel®Ironlake Mobile Graphics 64-bit

  Read the article

• How to include serious personal project in Resume?

  - by mob1lejunkie

  My brother has come up with an interesting business idea that could be commercialised. For over a month I have been creating the foundation for SaaS. I have been treating this as commercial project so designing using patterns and best practices. One of the reasons I want to include this in my Resume is my full time job doesn't involve current trendy ASP.Net technologies (e.g Linq/Entity Relationships, jQuery, ASP.Net MVC 3, Silverlight, etc) so the resume lacks impact. In my full time job I work on a 7 year old well designed product and since our data and web layers work well it would be stupid to re-engineer them only because recruiters think Linq, ASP.Net MVC and jQuery are cool. How can I include my personal project in Resume so that it doesn't sound like experiment or quick'n'dirty pet project? Many thanks.

  Read the article

• suspend resume not working on HP dv7

  - by Emiel

  this one is driving me nuts. My HP dv7 laptop isn't resuming from suspend and hybernate. On suspend - resume it leaves me with a black screen. On hibernate it succesfully loads the images and then it hangs.... I searched through internet and tried serveral things, but nothing seems to work for this HP dv7 on Ubuntu 12.04. With 11.10 it didn't work either. Intel® Core™ i5 CPU M 450 @ 2.40GHz × 4 VESA: Intel®Ironlake Mobile Graphics 64-bit Hope someone knows where to start the search.. I'm really desperate.

  Read the article

• Ubuntu Suspend won't wake by mouse

  - by corsen

  I just installed Ubuntu 11.04 and realized that suspend would not wake by either keyboard or mouse. After following instructions from here: http://ubuntuforums.org/showthread.php?t=1642817 The system will now wake by keyboard. I have a USB mouse it is a logitech G5. Even if I enable all of the USB devices listed in /proc/acpi/wakeup, my computer will still not wake up via mouse. I'd really prefer to wake by mouse instead of keyboard due to cats. Does anyone know why my mouse won't wake the machine even after enabling all USB devices listed? Thanks, Bryan

  Read the article

• USB mouse / keyboard not working after suspend

  - by Frode

  After upgrade from 12.04 to 12.10, the USB mouse/keyboard is not working when the laptop wake up from suspend. I need to remove and insert the USB dongle to get keyboard/mouse working again. This was not a problem before the upgrade. 6 months ago I had the same problem when upgrading from 11.10 to 12.04. At that time I solved it by doing a clean install of 12.04. Updated: Issue resolved after installing ppa:xubuntu-dev/xfce-4.12

  Read the article

• Layout of experienced programmer Resume? [closed]

  - by mob1lejunkie

  What layout of resume works best for experienced programmers? Currently my layout is: Contact Details Focus (goal) Technical Skills Professional Experience (Responsibilities + achievements at each job) Education Interests I feel my current layout uses up too much valuable space. Most of the online templates feel like junior Resumes with emphasis on education so I am not sure how I can improve it. I wonder how many hiring managers actually care about goal/objective? To me it looks useless. Also, is it necessary to have summary of technical skills/technologies? If so, would it not make more sense for it to be mentioned later in the Resume rather then at the top? Finally, do you have separate section for achievements? Many thanks.

  Read the article

• Suspend/hibernate doesn't work on an Asus Laptop

  - by b1ackjosh

  I'm having issues suspending 11.04 on my new Asus U30sd-XA1 laptop, it's a new laptop on the market and I'm wondering if anyone else has had this issue and maybe have a fix for it. Basically whenever I close or put the laptop to sleep the screen goes black but the video card doesn't actually turn off, then the fan spins up even faster then it was before and gets hot. I did see that some people were having similar issues on other laptops and they set the kernal back. I'm newish to ubuntu and I'm not super comfortable messing with the kernal. If anyone has any other solutions that would be great. I am not using the 520m nvidia driver because it won't load unity after it's installed. I've also heard quite a few bad things about the drivers on the ubuntu forums, so I deactivated the driver.

  Read the article

• How to quantify product work in Resume?

  - by mob1lejunkie

  One of things I do in my Resume is try to quantify the impact my work has had in the particular company I was with at the time. The reason is it shows the value my work had added to the business. Is this what you guys do as well or am I the only one? In my previous job this was easy as I worked on short/medium internal applications and it was fairly easy to measure end result. For example, external consulting company quoted $50,000 for an application Business Services department wanted I completed it in 3 days so I say I saved the company $48,000. I have been in my current job for 3 years but all of it has been on 1 single well established product. About 30% work is maintenance and 70% work is on new modules. I have worked on various modules like API (WCF), Security (2 factor authentication), etc. How should I quantify work on modules? Many thanks.

  Read the article

• Unable to suspend with FGLRX enabled

  - by schmmd

  I am unable to suspend in a fully updated (as of yesterday, 29 March 2011) Ubuntu 10.10 installation (kernel 2.6.35-28). Following is a list of some of my hardware: Motherboard: Gigabyte GA-X58A-UD3R Video: Radeon HD-567X-YNF3 Initially, when I went to either Suspend or Hibernate the machine would almost go into suspend, but it would never power down. Instead it would bounce back to the login screen. This was due to a problem with the USB3 ports being unable to suspend (noticed this in /var/log/kern.log). Disabling the USB3 ports in the BIOS fixed this issue. Now Suspend and Hibernate power down the machine. It successfully awakens from Hibernate. However, it will not return from suspend. The mouse and keyboard are not powered and the monitor has no signal. These devices are still not powered after a restart. I must power-cycle the machine. The pm-suspend log ends after it states that it entered suspend (i.e. there is no information any resume code running). I discovered that acpitool -s suspends the machine and resumes successfully exactly once. The second time the machine will not resume. I am not sure how these two tools handle suspend differently. UPDATE: the problem was introduced somewhere between 2.6.35-22 and 2.6.35-28. I have both kernels install presently. Suspend works fine with 2.6.35-22 but not with 2.6.38-28.

  Read the article

• How to inhibit suspend temporarily?

  - by Zorn

  I have searched around a bit for this and can't seem to find anything helpful. I have my PC running Ubuntu 12.10 set up to suspend after 30 minutes of inactivity. I don't want to change that, it works great most of the time. What I do want to do is disable the automatic suspend if a particular application is running. How can I do this? The closest thing I've found so far is to add a shell script in /usr/lib/pm-utils/sleep.d which checks if the application is running and returns 1 to indicate that suspend should be prevented. But it looks like the system then gives up on suspending automatically, instead of trying again after another 30 minutes. (As far as I can tell, if I move the mouse, that restarts the timer again.) It's quite likely the application will finish after a couple of hours, and I'd rather my PC then suspended automatically if I'm not using it at that point. (So I don't want to add a call to pm-suspend when the application finishes.) Is this possible? Any advice would be appreciated. Cheers. EDIT: As I noted in one of the comments below, what I actually wanted was to inhibit suspend when my PC was serving files over NFS; I just wanted to focus on the "suspend" part of the question because I already had an idea how to solve the NFS part. Using the 'xdotool' idea given in one of the answers, I have come up with the following script which I run from cron every few minutes. It's not ideal because it stops the screensaver kicking in as well, but it does work. I need to have a look at why 'caffeine' doesn't correctly re-enable suspend later on, then I could probably do better. Anyway, this does seem to work, so I'm including it here in case anyone else is interested. #!/bin/bash # If the output of this function changes between two successive runs of this # script, we inhibit auto-suspend. function check_activity() { /usr/sbin/nfsstat --server --list } # Prevent the automatic suspend from kicking in. function inhibit_suspend() { # Slightly jiggle the mouse pointer about; we do a small step and # reverse step to try to stop this being annoying to anyone using the # PC. TODO: This isn't ideal, apart from being a bit hacky it stops # the screensaver kicking in as well, when all we want is to stop # the PC suspending. Can 'caffeine' help? export DISPLAY=:0.0 xdotool mousemove_relative --sync -- 1 1 xdotool mousemove_relative --sync -- -1 -1 } LOG="$HOME/log/nfs-suspend-blocker.log" ACTIVITYFILE1="$HOME/tmp/nfs-suspend-blocker.current" ACTIVITYFILE2="$HOME/tmp/nfs-suspend-blocker.previous" echo "Started run at $(date)" >> "$LOG" if [ ! -f "$ACTIVITYFILE1" ]; then check_activity > "$ACTIVITYFILE1" exit 0; fi /bin/mv "$ACTIVITYFILE1" "$ACTIVITYFILE2" check_activity > "$ACTIVITYFILE1" if cmp --quiet "$ACTIVITYFILE1" "$ACTIVITYFILE2"; then echo "No activity detected since last run" >> "$LOG" else echo "Activity detected since last run; inhibiting suspend" >> "$LOG" inhibit_suspend fi

  Read the article

• $TERM set to "dumb" causes problems with suspend

  - by julkiewicz

  I've just upgraded from 11.04 to 11.10. So far I love it, everything seems just so much snappier. Now I just have one minor issue. When I try to suspend my laptop, it doesn't work - instead it fades out the screen, blocks it and then instantly wakes back. I've checked the logs in /var/log/pm-suspend.log and this fragment seems relevant: /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00clear suspend suspend: TERM environment variable not set. /usr/lib/pm-utils/sleep.d/00clear suspend suspend: Returned exit code 1. Sat Nov 19 12:23:20 CET 2011: Inhibit found, will not perform suspend Sat Nov 19 12:23:20 CET 2011: Running hooks for resume The mentioned script at /usr/lib/pm-utils/sleep.d/00clear reads: #!/bin/bash clear When I open a terminal anywhere by hand, $TERM is set to either "linux" or "xterm". However somehow when the 00clear command is executed $TERM is set to "dumb". Two questions: What is the correct value for $TERM when running 00clear script? Where can I set it up? I've looked for solutions on the web, however I could only find information on how to configure $TERM in a regular terminal (and this one is set properly).

  Read the article

• Laptop shuts down upon waking from suspend

  - by Bryan Head

  The computer enters suspend either by closing lid, choosing suspend from the top-right drop down, or hitting the power button and pressing suspend. It doesn't matter. I then attempt to wake the computer either by opening the lid (if it was closed) or hitting the power button. Again, doesn't matter. The computer will then immediately shutdown about 50% of the time. It seems to be more likely to shut down the longer it has been on suspend. I took a snapshot of /var/log/pm-suspend.log after a successfully resume and a shutdown. The only difference (outside of timestamps of course) was that a successful resume, after reporting the success of various suspend hooks, writes: Thu Jul 5 21:36:45 PDT 2012: performing suspend Thu Jul 5 21:37:10 PDT 2012: Awake. Thu Jul 5 21:37:10 PDT 2012: Running hooks for resume and then reports successful resume hooks. When it shuts down, the log ends at "performing suspend". I diffed the two files so I know this is the only difference. Thus, it looks like it's not even trying to wake up. Would love some ideas on this one. I've scoured the web but can't seem to find anyone else running into the same issue (it seems more common that the computer shuts down upon entering suspend, or only on hitting the power button to wake, and haven't seen any that are random like mine). I'll update with any requested information.

  Read the article

• 13.10 hangs on waking from suspend except when suspended from console

  - by Pavel

  I know waking from suspend is an issue, but this looks like a separate bug. When I suspend 13.10 on HP Pavillion dv6 (AMD 6770M/fglrx 13.10.10) from x, it suspends normally but freezes when waking. I get a black screen with a frozen cursor. But when I suspend from console with sudo pm-suspend, it wakes normally, and I can then get back my x with ctrl-alt-f7. If I suspend by closing lid under x, also freezes when waking up. If I suspend by closing lid under console, it wakes up into the x (?) login, then into a clean session.

  Read the article

• Suspend/resume issue hp envy m6

  - by aikeru

  :) I just installed Ubuntu 13.10 on my HP envy m6. When I press the "power" button and select to suspend, it looks like it goes to sleep (power light flashing, as expected). When I press the power button to wake it (or anything else), it stops flashing and goes solid (as it should) but the screen is black. I tried CTRL+ALT+F1 but nothing seems to happen. Is there something I can do to get Ubuntu to resume from suspend? EDIT: I tried getting any updates for Ubuntu as well as updating my BIOS. Neither seems to have any effect. EDIT: Tried the 2nd script from Ubuntu 12.04 LTS suspend fix and it seemed to have no effect. Tried the 1st script and now I can't seem to suspend at all - Ubuntu seems to try to suspend and then immediately goes to the password prompt. With some combination of things I seem to be able to get a new crash, though, involving wpa_supplicant. I allowed it to submit feedback. My WiFi seems to be working fine (I assume this is what WPA is). EDIT: I know this is 'askubuntu', but I did try latest Linux Mint / Cinnamon. Results were exactly the same (black screen, power light solid after waking up - just as before, I can make it reboot by mashing CTRL+ALT+DEL but CTRL+ALT+F1/etc. doesn't work). Trying Ubuntu 12.04 next. EDIT: Ubuntu 12.04 WORKS! At least it seems to with a quick test. Came right back up after suspend. If I don't have any other problems and no answers are suggested, I'll make my own answer and accept it. Maybe someone can use this information to help troubleshoot the real issue. Would be nice to be on the latest version... but suspend would've been a deal-breaker for me. Hope this info helps someone.

  Read the article

• Suspend fails and I know the module causing it. What can I do?

  - by ch0wn

  My suspend did not correctly since I installed a USB 3 extension card in my PC. Instead of going to S3, the computer just woke up instantly. dmesg gave the hint "usb_dev_suspend+0x0/0x20 returns -2" so I rmmod'ed the "xhci_hcd" module which did the trick. Is there a good way for me to work around this? The builds from the Kernel Mainline PPA did not help, unfortunately, and blacklisting the module is not my favorite option. Where is the best place for me to report this issue?

  Read the article

• How to activate a dialogue box on suspend?

  - by don.joey

  I am using 14.04 with unity. Quite regularly it happens to me that I want to shutdown the computer, but in the right corner menu I accidently hit Suspend in stead of Shutdown. Is it possible to add a dialogue box on the suspend menu? So that I don't always have to come back from suspend to finally shutdown afterwards. Or is it possible to make the shutdown button like 3 times bigger than the suspend button?

  Read the article

• suspend not working

  - by Eric

  I am running 13.10 on an ASUS 101-SE netbook. Under "power settings" I have selected suspend when inactive for 10 minutes and suspend when lid is closed. I get a warning when inactive that the computer will suspend due to inactivity, but it does not suspend either from that condition or when closing the lid. I seem to be getting multiple suspend messages as I need to click "cancel" or "OK" many times to get the error window to close when it has been inactive for some time. Anyone have any tips? Thank you.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >