Search Results

Search found 200 results on 8 pages for 'webmin'.

Page 1/8 | 1 2 3 4 5 6 7 8  | Next Page >

• Using a GoDaddy SSL certificate with Virtualmin (Webmin)

  - by Kevin

  A client of mine decided to go ahead and move from a self-signed certificate to a commercial one ("GoDaddy Standard SSL"). The first service I wanted to move to the commercial SSL cert was Webmin/Usermin... However, upon migrating to the new SSL cert and restarting Webmin, I got the following error: [21/Oct/2012:13:12:47 -0400] Restarting Failed to open SSL cert /etc/webmin/miniserv.cert at /usr/share/webmin/miniserv.pl line 4229. Error: Webmin server did not write new PID file And that's all it says. Here's Webmin's config file (/etc/webmin/miniserv.conf): port=10000 root=/usr/share/webmin mimetypes=/usr/share/webmin/mime.types addtype_cgi=internal/cgi realm=Webmin Server logfile=/var/webmin/miniserv.log errorlog=/var/webmin/miniserv.error pidfile=/var/webmin/miniserv.pid logtime=168 ppath= ssl=0 env_WEBMIN_CONFIG=/etc/webmin env_WEBMIN_VAR=/var/webmin atboot=1 logout=/etc/webmin/logout-flag listen=10000 denyfile=\.pl$ log=1 blockhost_failures=5 blockhost_time=60 syslog=1 session=1 server=MiniServ/1.600 userfile=/etc/webmin/miniserv.users keyfile=/etc/webmin/miniserv.pem passwd_file=/etc/shadow passwd_uindex=0 passwd_pindex=1 passwd_cindex=2 passwd_mindex=4 passwd_mode=0 preroot=virtual-server-theme passdelay=1 sudo=1 sessiononly=/virtual-server/remote.cgi preload=virtual-server=virtual-server/virtual-server-lib-funcs.pl virtual-server=virtual-server/feature-unix.pl virtual-server=virtual-server/feature-dir.pl virtual-server=virtual-server/feature-dns.pl virtual-server=virtual-server/feature-mail.pl virtual-server=virtual-server/feature-web.pl virtual-server=virtual-server/feature-webalizer.pl virtual-server=virtual-server/feature-ssl.pl virtual-server=virtual-server/feature-logrotate.pl virtual-server=virtual-server/feature-mysql.pl virtual-server=virtual-server/feature-postgres.pl virtual-server=virtual-server/feature-ftp.pl virtual-server=virtual-server/feature-spam.pl virtual-server=virtual-server/feature-virus.pl virtual-server=virtual-server/feature-webmin.pl virtual-server=virtual-server/feature-virt.pl virtual-server=virtual-server/feature-virt6.pl anonymous=/virtualmin-mailman/unauthenticated=anonymous premodules=WebminCore logouttimes= extracas=/etc/webmin/miniserv.chain certfile=/etc/webmin/miniserv.cert ssl_redirect=0 Here is a screen shot of the Webmin SSL config screen as well, for what it's worth: http://postimage.org/image/r472go7tf/ Edited Mon Oct 22 10:45:24 CDT 2012: When running the command openssl x509 -noout -text -in /etc/webmin/miniserv.cert as Falcon Momot suggested, I get the following error: unable to load certificate 139760808240800:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:696:Expecting: TRUSTED CERTIFICATE

  Read the article

• [Ubuntu 10.04 Desktop] Unable to get Webmin or Vboxdrv to auto start on boot

  - by Matthew Hodgkins

  Ever since installing Ubuntu 10.04 I've had issues getting things to auto-start. I have installed webmin and VirtualBox but every time I reboot I have to manually run: sudo /etc/init.d/webmin start sudo /etc/init.d/vboxdrv start I have run: sudo update-rc.d -f webmin remove and then hodge@hodge-fs:~$ sudo update-rc.d webmin defaults update-rc.d: warning: webmin start runlevel arguments (2 3 4 5) do not match LSB Default-Start values (2 3 5) Adding system startup for /etc/init.d/webmin ... /etc/rc0.d/K20webmin -> ../init.d/webmin /etc/rc1.d/K20webmin -> ../init.d/webmin /etc/rc6.d/K20webmin -> ../init.d/webmin /etc/rc2.d/S20webmin -> ../init.d/webmin /etc/rc3.d/S20webmin -> ../init.d/webmin /etc/rc4.d/S20webmin -> ../init.d/webmin /etc/rc5.d/S20webmin -> ../init.d/webmin But it they still refuse to start on boot. Any ideas?

  Read the article

• Proxying webmin with nginx

  - by TheLQ

  I am attempting to proxy webmin behind nginx for various reasons that are outside the scope of this question. However I've been trying for a while now and can't seem to figure it out and think I'm to the point where I've exhausted all the permutations of the config file I can think of. What I have now: relevant nginx config (commented out options removed, I tried many) # Proxy for webmin location /admin/quackwall-webmin { proxy_pass http://127.0.0.1:10000; # Also tried ending with /admin/quackwall-webmin proxy_set_header Host $host; } /etc/webmin/config - Relevant parts webprefix=/admin/quackwall-webmin webprefixnoredir=1 referer=(nginx domain name) Webmin itself is on the standard ports, listening on all addresses temporarily for debugging. SSL has been disabled for right now. So I make a standard request for the login page. However all the CSS and images are broken, with the standard login page returned for all of the resources. In the webmin miniserv logs I see 127.0.0.1 - - [29/Oct/2012:12:29:00 -0400] "GET /admin/quackwall-webmin/session_login.cgi HTTP/1.0" 401 2453 127.0.0.1 - - [29/Oct/2012:12:29:01 -0400] "GET /admin/quackwall-webmin/unauthenticated/style.css HTTP/1.0" 401 2453 127.0.0.1 - - [29/Oct/2012:12:29:01 -0400] "GET /admin/quackwall-webmin/unauthenticated/sorttable.js HTTP/1.0" 401 2453 127.0.0.1 - - [29/Oct/2012:12:29:01 -0400] "GET /admin/quackwall-webmin/unauthenticated/toggleview.js HTTP/1.0" 401 2453 So all the URL's are returning 401s. Interestingly ngrep seems to show that the requests suceeded on the backend communication between nginx and webmin T 127.0.0.1:58908 -> 127.0.0.1:10000 [AP] POST /admin/quackwall-webmin/session_login.cgi HTTP/1.0..Host: (host)..Connection: close..User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW 64; rv:16.0) Gecko/20100101 Firefox/16.0..Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8..Accept-Language: en-US,en;q=0.5. .Accept-Encoding: gzip, deflate..Referer: http://(host)/admin/quackwall-webmin/session_login.cgi..Cookie: testing=1..Cache-Control: ma x-age=0..Content-Type: application/x-www-form-urlencoded..Content-Length: 41....page=%2F&user=(user)&pass=(pass) T 127.0.0.1:10000 -> 127.0.0.1:58908 [AP] HTTP/1.0 200 Document follows.. Various other permutations of these config options and others show similar results, with the URL sent to webmin by nginx either being /admin/quackwall-webmin/session_login.cgi, /admin/quackwall-webmin//session_login.cgi, and just /session_login.cgi. All give 201 Unauthenticated responses. All requests, even those that somewhat succeed (as in I can actually load the resources of the page) Is changing the webprefix in webmin even supported? What am I doing wrong? What else can I try?

  Read the article

• virturalmin webmin dose not respond

  - by Miranda

  I have installed Virtualmin on a CentOS remote server, but it dose not seem to work https://115.146.95.118:10000/ at least the Webmin page dose not work. I have opened those ports http ALLOW 80:80 from 0.0.0.0/0 ALLOW 443:443 from 0.0.0.0/0 ssh ALLOW 22:22 from 0.0.0.0/0 virtualmin ALLOW 20000:20000 from 0.0.0.0/0 ALLOW 10000:10009 from 0.0.0.0/0 And restarting Webmin dose not solve it: /etc/rc.d/init.d/webmin restart Stopping Webmin server in /usr/libexec/webmin Starting Webmin server in /usr/libexec/webmin And I have tried to use Amazon EC2 this time, still couldn't get it to work. http://ec2-67-202-21-21.compute-1.amazonaws.com:10000/ [ec2-user@ip-10-118-239-13 ~]$ netstat -an | grep :10000 tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN udp 0 0 0.0.0.0:10000 0.0.0.0:* [ec2-user@ip-10-118-239-13 ~]$ sudo iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:20 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:21 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:10000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:993 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:995 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:20 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:587 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Since I need more than 10 reputation to post image, you can find the screenshots of the security group setting at the Webmin Support Forum. I have tried: sudo iptables -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT It did not change anything. [ec2-user@ip-10-118-239-13 ~]$ sudo yum install openssl perl-Net-SSLeay perl-Crypt-SSLeay Loaded plugins: fastestmirror, priorities, security, update-motd Loading mirror speeds from cached hostfile * amzn-main: packages.us-east-1.amazonaws.com * amzn-updates: packages.us-east-1.amazonaws.com amzn-main | 2.1 kB 00:00 amzn-updates | 2.3 kB 00:00 Setting up Install Process Package openssl-1.0.0j-1.43.amzn1.i686 already installed and latest version Package perl-Net-SSLeay-1.35-9.4.amzn1.i686 already installed and latest version Package perl-Crypt-SSLeay-0.57-16.4.amzn1.i686 already installed and latest version Nothing to do [ec2-user@ip-10-118-239-13 ~]$ nano /etc/webmin/miniserv.conf GNU nano 2.0.9 File: /etc/webmin/miniserv.conf port=10000 root=/usr/libexec/webmin mimetypes=/usr/libexec/webmin/mime.types addtype_cgi=internal/cgi realm=Webmin Server logfile=/var/webmin/miniserv.log errorlog=/var/webmin/miniserv.error pidfile=/var/webmin/miniserv.pid logtime=168 ppath= ssl=1 env_WEBMIN_CONFIG=/etc/webmin env_WEBMIN_VAR=/var/webmin atboot=1 logout=/etc/webmin/logout-flag listen=10000 denyfile=\.pl$ log=1 blockhost_failures=5 blockhost_time=60 syslog=1 session=1 server=MiniServ/1.585 userfile=/etc/webmin/miniserv.users keyfile=/etc/webmin/miniserv.pem passwd_file=/etc/shadow passwd_uindex=0 passwd_pindex=1 passwd_cindex=2 passwd_mindex=4 passwd_mode=0 preroot=virtual-server-theme passdelay=1 sessiononly=/virtual-server/remote.cgi preload= mobile_preroot=virtual-server-mobile mobile_prefixes=m. mobile. anonymous=/virtualmin-mailman/unauthenticated=anonymous ssl_cipher_list=ECDHE-RSA-AES256-SHA384:AES256-SHA256:AES256-SHA256:RC4:HIGH:MEDIUM:+TLSv1:!MD5:!SSLv2:+SSLv3:!ADH:!aNULL:!eNULL:!NULL:!DH:!ADH:!EDH:!AESGCM

  Read the article

• Creating sub domain on webmin [duplicate]

  - by Vijay

  This question is an exact duplicate of: Webmin - Setting up multiple virtual hosts - Subdomains 1 answer Can anybody help me in creating subdoain through webmin. I want to create subdomain like test.xxxxx.com for this I tried with several reference site but no luck. exp. http://www.trickylinux.net/add-domain-virtualminwebmin.html http://codeboxlabs.com/add-subdomain-webmin-linux/ My current httpd.conf look like: <VirtualHost *:80> SSLEngine off DocumentRoot /var/www/html/******/web DirectoryIndex index.php <Directory "/var/www/html/*****/web"> AllowOverride All Allow from All </Directory> ServerName www.******/.com ServerAlias ftp.*****.com SSLEngine off SSLVerifyClient optional </VirtualHost> Please help me to solve this issue.

  Read the article

• Webmin no route to host

  - by xloumbos

  Using Webmin ? Network Configuration, I added a new DNS address to the existing server (10.100.200.300). While I saved the new configuration, I lost access to webmin and ssh to this server. How can I retrieve access? I pinged 10.100.200.300 and its dead. When I tried to login with ssh it says: error no route to host. I usually log in to webmin the server IP address and port 10000 but now I cannot. Any help to go back to my previous state?

  Read the article

• Webmin - Setting up multiple virtual hosts - Subdomains

  - by Aaron

  Can someone please help me in using WEBMIN to setup virtual hosts. My current domain www.MYDOMAINLOLFAKE.com currently functions. Settings are as follows - Apache - Handles the name-based server www.MYDOMAINLOLFAKE.com on all addresses Address Any Port 80 Server Name www.MYDOMAINLOLFAKE.com Document Root /var/www/html BIND DNS Server - Master Zone MYDOMAINLOLFAKE.com ns1.mydomainlolfake.com IPHERE - works ns2.mydomainlolfake.com IPHERE - works mydomainlolfake.com IPHERE - works www.mydomainlolfake.com IPHERE -works mail.mydomainlolfake.com IPHERE - works ftp.mydomainlolfake.com IPHERE - works What I need - something.mydomainlolfake.com -- CANT GET THIS TO WORK What I tried - Create new virtual host Handles the name-based server something.mydomainlolfake.com on something.mydomainlolfake.com Address Any Port 81 Document Root: /var/www/vhosts/something What happens - I create the new VHOST and then ALL address try to go to that new Document root. I need different addresses to go to their respective folders. Can someone please give me better instructions on how to set that up using webmin? TLDR# How do I make a something.mydomainlolfake.com subdomain work in webmin on my CENTOS 6 web server?

  Read the article

• Better way to stop/start Webmin and SSH

  - by Jake

  Hi, it would be a good idea to not have webmin running all the time... just start it via ssh when I need it... so, I just stop webmin,and leaving SSH always running... when I need to access webmin, I start it through SSH. but there are lots of people from many country trying to bruteforce my SSH. I can reduce bruteforce using iptables. but because Im feeling still not safe (about 3 months ago), so I stop SSH and leaving webmin always running through custom port. I just start SSH through webmin when I need. and the result, no more bruteforce on SSH, and no bruteforce on webmin (maybe because the attacker dont know my webmin custom port) but I think this is still not really safe. and I cannot restrict access to some IP because I use random IP. If I stop both SSH and webmin, I will lost access to my server. Anyone know the better way dealing with this?

  Read the article

• Both Webmin & ISPConfig won't work on my Ubuntu Linode

  - by SERVE-U

  I followed the steps on this page to download and setup Webmin on my Linode Ubuntu server, however, when I try to visit https + my.ip.add.ress + :10000, the page just hangs and nothing loads. I already looked into my firewall settings. I uninstalled Webmin and installed ISPConfig and all its dependencies, and the same thing happens at https + my.ip.add.ress + :8080. This is my first time managing a server so there could be something I overlooked. But my server is a pretty vanilla Ubuntu 12.10 with LAMP stack installed exactly as per the instructions in Linode's documentation.

  Read the article

• Webmin no longer works - connection rejected

  - by Omeed

  I've had webmin installed on my 12.04 server and everything has been fine until recently. Now when I navigate to https:// myip:10000 I get a message saying the connection attempt is rejected. The last thing I did was set up a cron job to start utorrent webUI. I tried reinstalling but no change. When I check with netstat I see a webmin entrance on port 10000. I've also reset the iptables and allowed everything. I'm at a loss as to what to do now.

  Read the article

• How to Configure Name Servers using Webmin in Unmanaged VPS on Centos

  - by John

  I want to configure my site's name servers and all related stuff. I'm not able to find any good documention steps to do it straight-forwardly without understanding the nitty-gritty of this. I wish I could afford managed Vps I feel that I'm the odd one out looking for this documentation. I've followed doc at these places: http://www.webtop.com.au/blog/how-to-setup-dns-using-webmin-2009052848 , http://www.beer.org.uk/bsacdns and https://www.virtacoresupport.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=134

  Read the article

• How do I make webmin secure?

  - by Josiah

  I want to install webmin to make server administration tasks on my Ubuntu 10.4 server easier. However I'm very nervious about having that kind of power accessable over the web. So I want to know how to secure webmin so that it can't be used to comprimise my server. So far here are my ideas, but I still don't feel comfortable: Make webmin accessable from only the localhost (how?) Use SSH tunneling to access the webmin server whenever I need to administrate it Can anyone help me with instructions on making webmin accessable only from the localhost? What other ways can I make webmin secure?

  Read the article

• Ubuntu 12.04 issue installing Webmin modules (file does not exist)

  - by Arthur

  I'm running ubuntu 12.04. On this machine I have Webmin 1.580 installed. When trying to add a new module to Webmin I receive an error: "Failed to install module from : File does not exist" This happens when i go to Webmin Configuration Webmin Modules Select "Third party module from" Select "OpenVPN admin tool" and clicking on install module After I selected "OpenVPN admin tool" this url is being added: http://www.openit.it/downloads/OpenVPNadmin/openvpn-2.5.wbm.gz This URL resolves to a correct file. When uploading the file directly, the same error occurs. In the log file: /var/webmin/webmin.log nothing special is reported. How can I fix this issue? P.s. I run this server in CLI mode

  Read the article

• Problem connecting to Webmin

  - by railguage48

  I have installed Webmin with the view to try an understand what is all running. Yesterday I had it setup with login and password, but today when I try to get access to the server with: https://ubuntu:10000/ in order to login, I get unable to connect, the page does not load. Seems like there is no connection. I tried http://localhost:10000 and https://localhost:10000 They both returned the same unable to connect response. I am not sure of what it means to turn https on. ... the https and http is not showing. Am I going about this the wrong way?

  Read the article

• Webmin and/or port 10000 not working

  - by DisgruntledGoat

  I've recently installed Webmin on a Ubuntu server but I can't get it to work. I asked a recent question about saving iptables but it turns out you don't need to "save" iptables changes. Anyway, I still can't get Webmin working after opening the port up: iptables -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT It seems that either the command is not opening up port 10000, or there is a separate problem with Webmin. If I run iptables -L I see lines like the following, but no port 10000: ACCEPT tcp -- anywhere anywhere tcp dpt:5555 state NEW ACCEPT tcp -- anywhere anywhere tcp dpt:8002 state NEW ACCEPT tcp -- anywhere anywhere tcp dpt:9001 state NEW However, there is a line: ACCEPT tcp -- anywhere anywhere tcp dpt:webmin Any ideas why Webmin is not working? The IP address works fine and we can view web sites on the server, but https://[ip]:10000/ (or http) doesn't work.

  Read the article

• apache proxypass to webmin

  - by Ricardo

  I have a problem with apache2 webmin redirect. My ProxyPass is: ProxyRequests Off ProxyPreserveHost On SSLProxyEngine On ProxyPass /admin/webmin/ https://localhost:10000/ ProxyHTMLURLMap https://localhost:10000 /admin/webmin <Location /admin/webmin/> ProxyHTMLExtended On SetOutputFilter proxy-html ProxyPassReverse https://localhost:10000/ ProxyPassReverse https://xxxxxxxxxxxxxxxxxxxx.amazonaws.com:10000/ Order allow,deny Allow from all </Location> When I connect using https://xxxxxxxxxxxxxxxxxxxx.amazonaws.com:10000/ there is no problem. But when I connect use https://xxxxxxxxxxxxxxxxxxxx.amazonaws.com/admin/webmin the page lost css and after login show me the error: The requested URL /session_login.cgi was not found on this server. I think is an error with my ProxyPass but I don´t know what is.

  Read the article

• How Do I Install a Webmin Module?

  - by ServerChecker

  I found that my Webmin doesn't come with the vsftpd module to configure vsftpd. I found on their site that that they have a download tarball. I downloaded it, but don't know what the proper steps are to add this tarball into the webmin config. I'm running Ubuntu Server 9.10 with Webmin 1.510, if that matters.

  Read the article

• Blocking an IP in Webmin

  - by Dan J

  I've been checking my /var/log/secure log recently and have seen the same bot trying to brute force onto my Centos server running webmin. I created a chain + rule in Networking - Linux Firewall: Drop If source is 113.106.88.146 But I'm still seeing the attempted logins in the log: Jun 6 10:52:18 CentOS5 sshd[9711]: pam_unix(sshd:auth): check pass; user unknown Jun 6 10:52:18 CentOS5 sshd[9711]: pam_succeed_if(sshd:auth): error retrieving information about user larry Jun 6 10:52:19 CentOS5 sshd[9711]: Failed password for invalid user larry from 113.106.88.146 port 49328 ssh2 Here is the contents of /etc/sysconfig/iptables: # Generated by webmin *filter :banned-ips - [0:0] -A INPUT -p udp -m udp --dport ftp-data -j ACCEPT -A INPUT -p udp -m udp --dport ftp -j ACCEPT -A INPUT -p udp -m udp --dport domain -j ACCEPT -A INPUT -p tcp -m tcp --dport 20000 -j ACCEPT -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT -A INPUT -p tcp -m tcp --dport https -j ACCEPT -A INPUT -p tcp -m tcp --dport http -j ACCEPT -A INPUT -p tcp -m tcp --dport imaps -j ACCEPT -A INPUT -p tcp -m tcp --dport imap -j ACCEPT -A INPUT -p tcp -m tcp --dport pop3s -j ACCEPT -A INPUT -p tcp -m tcp --dport pop3 -j ACCEPT -A INPUT -p tcp -m tcp --dport ftp-data -j ACCEPT -A INPUT -p tcp -m tcp --dport ftp -j ACCEPT -A INPUT -p tcp -m tcp --dport domain -j ACCEPT -A INPUT -p tcp -m tcp --dport smtp -j ACCEPT -A INPUT -p tcp -m tcp --dport ssh -j ACCEPT -A banned-ips -s 113.106.88.146 -j DROP COMMIT # Completed # Generated by webmin *mangle :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed # Generated by webmin *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT # Completed

  Read the article

• Create Webmin user for an EC2 Instance

  - by Dean

  I've setup an Amazon EC2 Instance, using the Ubuntu 12.04 AMI (ubuntu/images/ebs/ubuntu-precise-12.04-amd64-server-20120424 (ami-a29943cb)), and I'd like to get Webmin working (so I can setup a DNS). After following the installation instructions on Webmin's site, the installer says I can login with any username/pass of a user who has superuser access. The problem is that the EC2 instance only has 1 user "ubuntu", which can only login using SSH keys -- not a password! I've tried creating users manually and I can't login as those users (even via SSH), so I think it might be a permission thing provided by the AMI. Does anyone know the best way around setting up a login to my webmin?

  Read the article

• webmin bind issue- error when i try to start bind

  - by Arvind

  I am setting up a domain = mydomain.com with 2 nameservers ns1.mydomain.com and ns2.mydomain.com in Webmin - BIND. For this, I have registered 2 child nameservers at my domain registrar, and in Webmin-Bind I have set up a new zone for this domain. In this zone, i have specified 2 nameserver records- one each for ns1 and ns2. Also, I have defined 2 address records- one each for ns1.mydomain.com -> IP Address #1 and for ns2.mydomain.com -> IP Address #2 However when I try to start BIND in Webmin, I get the following error-- Failed to start BIND : Starting named: Error in named configuration: zone mydomain.com/IN: has no NS records zone mydomain.com/IN: not loaded due to errors. _default/mydomain.com/IN: bad zone [FAILED]

  Read the article

• Password-checking program for webmin

  - by Hubert Kario

  I'm trying to perform password quality checks using pwqcheck (part of passwdq) in webmin. Unfortunately when I set in "Users and Groups" module settings the "External password-checking program" to the same value that works for samba check password script: /usr/bin/pwqcheck -1 I get following error when I try to create a user (named test-user): Failed to save user : pwqcheck: Error parsing parameter "test-user": Invalid parameter So, How do I configure Webmin together with pwqcheck?

  Read the article

• Webmin Cluster Copy Protocol

  - by hozza

  Just toying with a clustered server farm for fun (as you do) and experimenting with Webmin and its 'clustered' modules. It has a feature that can copy files from one server to another on a repeating basis. Does this feature/module use cron jobs and what protocol does it use to copy the files? I have searched all about the net and yet I cannot find any decent documentation on webmin or its features. Is it just poorly documented or am I missing something?

  Read the article

• How can I call a URL as a cron job in Webmin?

  - by EmmyS

  (Possibly this belongs on stackoverflow, although it's not really a programming issue since the code works when run directly. If it needs to be moved, though, no problem.) I have a PHP file (which consumers a National Weather Service web service via SOAP, if it matters) that I need to run on a scheduled basis. I'm trying to set up a cron job in Webmin. If I use an absolute path to the file in the Command field, when I run it I get some strange errors: /var/www/html/mysite.com/test/ndfdXMLclient.php: line 1: ?php: No such file or directory /var/www/html/mysite.com/test/ndfdXMLclient.php: line 2: //: is a directory /var/www/html/mysite.com/test/ndfdXMLclient.php: line 3: //DOCUMENTATION: No such file or directory /var/www/html/mysite.com/test/ndfdXMLclient.php: line 4: //: is a directory /var/www/html/mysite.com/test/ndfdXMLclient.php: line 5: syntax error near unexpected token `"running client code",' /var/www/html/mysite.com/test/ndfdXMLclient.php: line 5: `error_log("running client code", 1, "[email protected]");' The actual code in my file for those 5 lines looks like this: <?php // *************************************************************************** //DOCUMENTATION FROM WEATHER.GOV ALL STORED IN xmlClientComments.txt // *************************************************************************** error_log("running client code", 1, "[email protected]"); The code runs perfectly fine when I run it directly in my browser, so why doesn't webmin recognize it as code? (The same thing happens if I enter the actual URL in the command field - http://mysite.com/test/ndfdXMLclient.php.) I've never worked with webmin before; most of our hosts' cron control panels allow cron jobs to run PHP files like this with no issue. Is there some trick to getting webmin to read php as actual php?

  Read the article

• webmin not working on port 10000

  - by Ali

  Hi, I posted a similar question yesterday but can't seem to find that post. I have installed webmin on my server which has SSL and its service is running but I am unable to open it in browser. I thought may be the port is blocked by server's firewall so I entered port 10000 (TCP - inbound) in APF but still no luck. When I use https://localhost:10000 on server to access webmin then it works fine but not remotely. Why is such a simple thing so hard to run? Thanks

  Read the article

• Squid and Webmin - the 'all' acl

  - by Genboy

  In older versions of versions of squid, you had to define an acl 'all'. acl all src 0.0.0.0/0.0.0.0 You use this for http_access allow all http_access deny all etc. In Squid 3.0 and above, the 'all' ACL is built-in, you cannot (& need not) define it. However, the webmin squid module doesn't seem to know this - when you try to add a rule using all, it doesn't show 'all' in it's list of ACLs. How does one get around this? I am using webmin 1.530 on Debian Lenny. Squid Version is 3.0.STABLE19-1~bpo50+1

  Read the article

1 2 3 4 5 6 7 8  | Next Page >