Search Results

Search found 5342 results on 214 pages for 'win man'.

Page 1/214 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Man pages not finding entry

    - by Mike
    So, I'm not sure what is going on with my system (ubuntu 12.04), but my man pages do not seem to be working. I try man gcc and get the following response No manual entry for gcc See 'man 7 undocumented' for help when manual pages are not available. However I see the man entry in /usr/share/man/man1/gcc.1.gz Here is what my /etc/manpath.config file looks like # manpath.config # # This file is used by the man-db package to configure the man and cat paths. # It is also used to provide a manpath for those without one by examining # their PATH environment variable. For details see the manpath(5) man page. # # Lines beginning with `#' are comments and are ignored. Any combination of # tabs or spaces may be used as `whitespace' separators. # # There are three mappings allowed in this file: # -------------------------------------------------------- # MANDATORY_MANPATH manpath_element # MANPATH_MAP path_element manpath_element # MANDB_MAP global_manpath [relative_catpath] #--------------------------------------------------------- # every automatically generated MANPATH includes these fields # #MANDATORY_MANPATH /usr/src/pvm3/man # MANDATORY_MANPATH /usr/man MANDATORY_MANPATH /usr/share/man MANDATORY_MANPATH /usr/local/share/man #--------------------------------------------------------- # set up PATH to MANPATH mapping # ie. what man tree holds man pages for what binary directory. # # *PATH* -> *MANPATH* # MANPATH_MAP /bin /usr/share/man MANPATH_MAP /usr/bin /usr/share/man MANPATH_MAP /sbin /usr/share/man MANPATH_MAP /usr/sbin /usr/share/man MANPATH_MAP /usr/local/bin /usr/local/man MANPATH_MAP /usr/local/bin /usr/local/share/man MANPATH_MAP /usr/local/sbin /usr/local/man MANPATH_MAP /usr/local/sbin /usr/local/share/man MANPATH_MAP /usr/X11R6/bin /usr/X11R6/man MANPATH_MAP /usr/bin/X11 /usr/X11R6/man MANPATH_MAP /usr/games /usr/share/man MANPATH_MAP /opt/bin /opt/man MANPATH_MAP /opt/sbin /opt/man #--------------------------------------------------------- # For a manpath element to be treated as a system manpath (as most of those # above should normally be), it must be mentioned below. Each line may have # an optional extra string indicating the catpath associated with the # manpath. If no catpath string is used, the catpath will default to the # given manpath. # # You *must* provide all system manpaths, including manpaths for alternate # operating systems, locale specific manpaths, and combinations of both, if # they exist, otherwise the permissions of the user running man/mandb will # be used to manipulate the manual pages. Also, mandb will not initialise # the database cache for any manpaths not mentioned below unless explicitly # requested to do so. # # In a per-user configuration file, this directive only controls the # location of catpaths and the creation of database caches; it has no effect # on privileges. # # Any manpaths that are subdirectories of other manpaths must be mentioned # *before* the containing manpath. E.g. /usr/man/preformat must be listed # before /usr/man. # # *MANPATH* -> *CATPATH* # MANDB_MAP /usr/man /var/cache/man/fsstnd MANDB_MAP /usr/share/man /var/cache/man MANDB_MAP /usr/local/man /var/cache/man/oldlocal MANDB_MAP /usr/local/share/man /var/cache/man/local MANDB_MAP /usr/X11R6/man /var/cache/man/X11R6 MANDB_MAP /opt/man /var/cache/man/opt # #--------------------------------------------------------- # Program definitions. These are commented out by default as the value # of the definition is already the default. To change: uncomment a # definition and modify it. # #DEFINE pager pager -s #DEFINE cat cat #DEFINE tr tr '\255\267\264\327' '\055\157\047\170' #DEFINE grep grep #DEFINE troff groff -mandoc #DEFINE nroff nroff -mandoc #DEFINE eqn eqn #DEFINE neqn neqn #DEFINE tbl tbl #DEFINE col col #DEFINE vgrind vgrind #DEFINE refer refer #DEFINE grap grap #DEFINE pic pic -S # #DEFINE compressor gzip -c7 #--------------------------------------------------------- # Misc definitions: same as program definitions above. # #DEFINE whatis_grep_flags -i #DEFINE apropos_grep_flags -iEw #DEFINE apropos_regex_grep_flags -iE #--------------------------------------------------------- # Section names. Manual sections will be searched in the order listed here; # the default is 1, n, l, 8, 3, 0, 2, 5, 4, 9, 6, 7. Multiple SECTION # directives may be given for clarity, and will be concatenated together in # the expected way. # If a particular extension is not in this list (say, 1mh), it will be # displayed with the rest of the section it belongs to. The effect of this # is that you only need to explicitly list extensions if you want to force a # particular order. Sections with extensions should usually be adjacent to # their main section (e.g. "1 1mh 8 ..."). # SECTION 1 n l 8 3 2 3posix 3pm 3perl 5 4 9 6 7 # #--------------------------------------------------------- # Range of terminal widths permitted when displaying cat pages. If the # terminal falls outside this range, cat pages will not be created (if # missing) or displayed. # #MINCATWIDTH 80 #MAXCATWIDTH 80 # # If CATWIDTH is set to a non-zero number, cat pages will always be # formatted for a terminal of the given width, regardless of the width of # the terminal actually being used. This should generally be within the # range set by MINCATWIDTH and MAXCATWIDTH. # #CATWIDTH 0 # #--------------------------------------------------------- # Flags. # NOCACHE keeps man from creating cat pages. #NOCACHE Thanks for any help (p.s. even 'man man' fails) Edit: When I run ls -l /usr/share/man/man1/gcc* I get the following output lrwxrwxrwx 1 root root 12 May 27 15:41 /usr/share/man/man1/gcc.1.gz -> gcc-4.6.1.gz -rw-r--r-- 1 root root 217776 Apr 15 17:34 /usr/share/man/man1/gcc-4.6.1.gz

    Read the article

  • Még egy kis Iron Man 2...

    - by Fekete Zoltán
    Az Oracle website-on az Iron Man 2 oldalon található sok információ többek között ezekrol a témákról: - Oracle Cloud Computing - Exadata, Sun Oracle Database Machine - Oracle Enterprise Manager Megnézhetjük az Iron Man 2 trailert is: Iron Man 2 oldalon, továbbá a speciális Oracle szoftver és hardverrol is szóló mozi elozetes megmutatja mit jelent ez a kombináció az innovatív cégeknek.

    Read the article

  • TCP RST Reset Every 5 Minutes on Windows 2003 sp2

    - by Dan
    Hey, Recently I had a web developer come to me and ask why he was receiving connection errors in his app that was accessing a sql database. So, I went through my normal trouble shooting steps to isolate or reproduce the issue. I discovered that if I connected to the database using Query Analyzer and let the connection idle for 5 minutes it would disconnect. Meaning... I would no longer be able to refresh my tables or any other object/node within the object browser in Query Analyzer. I would have to right click on the instance and refresh for it to re-establish the connection. Next I went to wireshark and ran a capture on the client pc's nic card. Sure enough it was receiving a TCP RST reset every 5 min if the connection idled longer than 5 min. I also ran a capture on the SQL Server and noticed the TCP RST reset command as well. Attached below is the capture from the client Machine. If someone could please assist... That would be great. -I checked all settings within SQL Server 2000 against another server and they all seem to be the same. -Issue does not occur if I connect to any other SQL server 2000 server. -Issue does not occur if connecting to SQL on the server itself... so only over the network. -I consulted with network team and this is the response back: There are no firewalls or proxies in between SQL Server and your desktop. The traffic flows like this: Desktop-Access Switch-Distro Switch-Core Switch-Datacenter Switch-SQL Server None of the switches have security ACL’s configured on them. Also they stated that NAT was not turned on. -Issue does not occur with SQL server Enterprise Manager. -Ran SQL Profiler at the same time and did not see anything out of the ordinary during the RST I HAVE SEARCHED HIGH AND LOW ON GOOGLE FOR A RESOLUTION FOR THIS ISSUE. NO LUCK! My questions are: What could be causing this? Wrong Sequence number? setting in a router or switch the network team may have over looked? Setting within Windows? Setting within SQL Server 2000 that I have over looked? Better way to utilize Wireshark to find more answers? RST is about 10 from the bottom. No. Time Source Destination Protocol Info 258 24.390708 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [SYN] Seq=0 Len=0 MSS=1260 259 24.401679 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [SYN, ACK] Seq=0 Ack=1 Win=64240 Len=0 MSS=1460 260 24.401729 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=0 261 24.402212 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=42 262 24.413335 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=1 Ack=43 Win=64198 Len=37 285 24.466512 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [ACK] Seq=43 Ack=38 Win=65498 [TCP CHECKSUM INCORRECT] Len=1260 286 24.466536 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1303 Ack=38 Win=65498 [TCP CHECKSUM INCORRECT] Len=437 289 24.478168 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [ACK] Seq=38 Ack=1740 Win=64240 Len=0 290 24.480078 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=38 Ack=1740 Win=64240 Len=385 293 24.493629 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1740 Ack=423 Win=65113 [TCP CHECKSUM INCORRECT] Len=60 294 24.504637 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=423 Ack=1800 Win=64180 Len=17 295 24.533197 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1800 Ack=440 Win=65096 [TCP CHECKSUM INCORRECT] Len=44 296 24.544098 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=440 Ack=1844 Win=64136 Len=17 297 24.544524 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1844 Ack=457 Win=65079 [TCP CHECKSUM INCORRECT] Len=58 298 24.558033 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=457 Ack=1902 Win=64078 Len=31 299 24.558493 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1902 Ack=488 Win=65048 [TCP CHECKSUM INCORRECT] Len=92 300 24.569984 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=488 Ack=1994 Win=63986 Len=70 301 24.577395 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1994 Ack=558 Win=64978 [TCP CHECKSUM INCORRECT] Len=448 303 24.589834 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=558 Ack=2442 Win=63538 Len=64 304 24.590122 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [FIN, ACK] Seq=2442 Ack=622 Win=64914 [TCP CHECKSUM INCORRECT] Len=0 305 24.601094 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [ACK] Seq=622 Ack=2443 Win=63538 Len=0 306 24.601659 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [FIN, ACK] Seq=622 Ack=2443 Win=63538 Len=0 307 24.601686 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [ACK] Seq=2443 Ack=623 Win=64914 [TCP CHECKSUM INCORRECT] Len=0 321 25.839371 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [SYN] Seq=0 Len=0 MSS=1260 322 25.850291 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [SYN, ACK] Seq=0 Ack=1 Win=64240 Len=0 MSS=1460 323 25.850321 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=0 324 25.850660 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=42 325 25.861573 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=1 Ack=43 Win=64198 Len=37 326 25.863103 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [ACK] Seq=43 Ack=38 Win=65498 [TCP CHECKSUM INCORRECT] Len=1260 327 25.863130 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=1303 Ack=38 Win=65498 [TCP CHECKSUM INCORRECT] Len=463 328 25.874417 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [ACK] Seq=38 Ack=1766 Win=64240 Len=0 329 25.876315 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=38 Ack=1766 Win=64240 Len=385 330 25.876905 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=1766 Ack=423 Win=65113 [TCP CHECKSUM INCORRECT] Len=60 331 25.887773 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=423 Ack=1826 Win=64180 Len=17 332 25.888299 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=1826 Ack=440 Win=65096 [TCP CHECKSUM INCORRECT] Len=44 333 25.899169 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=440 Ack=1870 Win=64136 Len=17 334 25.899574 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=1870 Ack=457 Win=65079 [TCP CHECKSUM INCORRECT] Len=58 335 25.910618 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=457 Ack=1928 Win=64078 Len=31 336 25.911051 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=1928 Ack=488 Win=65048 [TCP CHECKSUM INCORRECT] Len=92 337 25.922068 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=488 Ack=2020 Win=63986 Len=70 338 25.922500 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2020 Ack=558 Win=64978 [TCP CHECKSUM INCORRECT] Len=34 339 25.933621 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=558 Ack=2054 Win=63952 Len=29 340 25.941165 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2054 Ack=587 Win=64949 [TCP CHECKSUM INCORRECT] Len=54 341 25.952164 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=587 Ack=2108 Win=63898 Len=17 342 25.952993 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2108 Ack=604 Win=64932 [TCP CHECKSUM INCORRECT] Len=72 343 25.963889 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=604 Ack=2180 Win=63826 Len=17 344 25.964366 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2180 Ack=621 Win=64915 [TCP CHECKSUM INCORRECT] Len=52 345 25.975253 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=621 Ack=2232 Win=63774 Len=17 346 25.975590 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2232 Ack=638 Win=64898 [TCP CHECKSUM INCORRECT] Len=32 347 25.986588 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=638 Ack=2264 Win=63742 Len=167 348 25.987262 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2264 Ack=805 Win=64731 [TCP CHECKSUM INCORRECT] Len=512 349 25.998464 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=805 Ack=2776 Win=63230 Len=89 350 25.998861 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2776 Ack=894 Win=64642 [TCP CHECKSUM INCORRECT] Len=46 351 26.009849 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=894 Ack=2822 Win=63184 Len=17 352 26.010175 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2822 Ack=911 Win=64625 [TCP CHECKSUM INCORRECT] Len=80 353 26.021220 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=911 Ack=2902 Win=63104 Len=33 354 26.022613 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2902 Ack=944 Win=64592 [TCP CHECKSUM INCORRECT] Len=498 355 26.034018 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=944 Ack=3400 Win=64240 Len=89 356 26.046501 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [SYN] Seq=0 Len=0 MSS=1260 357 26.057323 x.x.x.10 x.x.x.99 TCP 2226 > 14493 [SYN, ACK] Seq=0 Ack=1 Win=64240 Len=0 MSS=1460 358 26.057355 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=0 359 26.057661 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [PSH, ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=42 361 26.068606 x.x.x.10 x.x.x.99 TCP 2226 > 14493 [PSH, ACK] Seq=1 Ack=43 Win=64198 Len=37 362 26.070087 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [ACK] Seq=43 Ack=38 Win=65498 [TCP CHECKSUM INCORRECT] Len=1260 363 26.070113 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [PSH, ACK] Seq=1303 Ack=38 Win=65498 [TCP CHECKSUM INCORRECT] Len=485 364 26.081336 x.x.x.10 x.x.x.99 TCP 2226 > 14493 [ACK] Seq=38 Ack=1788 Win=64240 Len=0 365 26.083330 x.x.x.10 x.x.x.99 TCP 2226 > 14493 [PSH, ACK] Seq=38 Ack=1788 Win=64240 Len=385 366 26.083943 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [PSH, ACK] Seq=1788 Ack=423 Win=65113 [TCP CHECKSUM INCORRECT] Len=46 368 26.094921 x.x.x.10 x.x.x.99 TCP 2226 > 14493 [PSH, ACK] Seq=423 Ack=1834 Win=64194 Len=17 369 26.095317 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [PSH, ACK] Seq=1834 Ack=440 Win=65096 [TCP CHECKSUM INCORRECT] Len=48 370 26.107553 x.x.x.10 x.x.x.99 TCP 2226 > 14493 [PSH, ACK] Seq=440 Ack=1882 Win=64146 Len=877 371 26.241285 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [ACK] Seq=3400 Ack=1033 Win=64503 [TCP CHECKSUM INCORRECT] Len=0 372 26.241307 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [ACK] Seq=1882 Ack=1317 Win=65535 [TCP CHECKSUM INCORRECT] Len=0 653 55.913838 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 > 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 654 55.924547 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 > 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 910 85.887176 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 > 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 911 85.898010 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 > 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 1155 115.859520 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 1156 115.870285 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 1395 145.934403 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 1396 145.945938 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 1649 175.906767 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 1650 175.917741 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 1887 205.881080 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 1888 205.891818 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 2112 235.854408 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 2113 235.865482 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 2398 265.928342 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 2399 265.939242 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 2671 295.900714 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 2672 295.911590 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 2880 315.705029 x.x.x.10 x.x.x.99 TCP 2226 14493 [RST] Seq=1317 Len=0 2973 325.975607 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 2974 325.986337 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 2975 326.154327 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive] 2226 14492 [ACK] Seq=1032 Ack=3400 Win=64240 Len=1 2976 326.154350 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive ACK] 14492 2226 [ACK] Seq=3400 Ack=1033 Win=64503 [TCP CHECKSUM INCORRECT] Len=0

    Read the article

  • Iron Man’s Arc Reactor Built from Dollar Store Parts

    - by Jason Fitzpatrick
    Building a good looking Iron Man cosplay suit on a budget is no easy task; this clever Dollar Store inspired build combines cheap off the shelf parts to create a surprisingly awesome Arc Reactor. LED lights, sink strainers, and some sewing pins were all sacrificed to create this inexpensive but great looking Arc Reactor prop. Hit up the link below for a full run down of the build. Iron Man Arc Reactor [via Make] HTG Explains: Learn How Websites Are Tracking You Online Here’s How to Download Windows 8 Release Preview Right Now HTG Explains: Why Linux Doesn’t Need Defragmenting

    Read the article

  • Unable to install Win XP nor Win 7 after installing Ubuntu 11.1

    - by Pablo C. Garcia
    I'll try to make this scenario as clear as possible. Laptop Specs HP dv6-2189la: 500 HDD 4GB Ram Intel i7 Personal Specs - Linux newbie running for the first time. Quite confused :( I had Windows 7 x64, decided to start fresh new so I planned on formatting. Since I use it for work and didn't require it for another week, I didn't rush into installing Win 7 immediately as I wanted to try Ubuntu for quite a while. 1) Downloaded Ubuntu 11.1 2) Burned ISO to CD 3) Installed Ubuntu using the full HDD of 500GB erasing Win7 4) Ubuntu ran awesome (especially for me being a Linux Newbie from scratch) I used Ubuntu for a while, but now I need to get back to work with Win 7. Tried running the installation CD for Win 7 and it just skips to Ubuntu without loading. Checked BIOS, tried other discs, even tried the disc on another computer and it works. Since that didn't work, I tried running Win XP. This CD does load, it starts loading files, drives, kernel, blah blah and before even getting to install it Blue screens with error 0x0000007b. I already used Gparted and created up to 250 GB space for Windows. Formatted to NTFS. I really don´t know what do now. I've tried almost everything I know within my knowledge. I could say I'm an advanced PC user, but I bumped into the Linux wall starting from scratch. All suggestions will be appreciated. Thanks!

    Read the article

  • Are there any famous one-man-army programmers?

    - by DFectuoso
    Lately I have been learning of more and more programmers who think that if they were working alone, they would be faster and would deliver more quality. Usually that feeling is attached to a feeling that they do the best programming in their team and at the end of the day the idea is quite plausible. If they ARE doing the best programming, and worked alone (and more maybe) the final result would be a better piece of software. I know this idea would only work if you were passionate enough to work 24/7, on a deadline, with great discipline. So after considering the idea and trying to learn a little more, I wonder if there are famous one-man-army programmers that have delivered any (useful) software in the past?

    Read the article

  • Small Business and Organic SEO - A Win Win Situation

    Small business owners have to run on tiny budgets and that becomes constraint for effective publicity. The online marketing performance also suffers due to this crucial factor. The remedy lies in organic SEO, which efficiently works for the website of small business and supports the placement in higher rankings in search results. It is a win win situation for small business owners.

    Read the article

  • how to make man page not disappear on exit

    - by Alan
    ...probably a silly question but I could not beat google into telling me the answer so posting here: I got 2 machines - Slackware 13 and Fedora 11. On the slack machine, when I use man I can scroll all the way to the bottom then exit man and the info stays in my terminal window (which I find very convenient as I can read it while typing the command in question, copy-paste the options, etc.). On fedora when I close man the man page info is gone. How can I configure man (or is it the terminal?) to not remove the man page info on exit?

    Read the article

  • DELETE and EDIT is not working in my python program

    - by user2968025
    This is a simple python program that ADD, DELETE, EDIT and VIEW student records. The problem is, DELETE and EDIT is not working. I dont know why but when I tried removing one '?' in the DELETE dunction, I had the error that says there are only 8 columns and it needs 10. But originally, there are only 9 columns. I don't know where it got the other one to make it 10. Please help.. :( import sys import sqlite3 import tkinter import tkinter as tk from tkinter import * from tkinter.ttk import * def newRecord(): studentnum="" name="" age="" birthday="" address="" email="" course="" year="" section="" con=sqlite3.connect("Students.db") cur=con.cursor() cur.execute("CREATE TABLE IF NOT EXISTS student(studentnum TEXT, name TEXT, age TEXT, birthday TEXT, address TEXT, email TEXT, course TEXT, year TEXT, section TEXT)") def save(): studentnum=en1.get() name=en2.get() age=en3.get() birthday=en4.get() address=en5.get() email=en6.get() course=en7.get() year=en8.get() section=en9.get() student=(studentnum,name,age,birthday,address,email,course,year,section) cur.execute("INSERT INTO student(studentnum,name,age,birthday,address,email,course,year,section) VALUES(?,?,?,?,?,?,?,?,?)",student) con.commit() win=tkinter.Tk();win.title("Students") lbl=tkinter.Label(win,background="#000",foreground="#ddd",width=30,text="Add Record") lbl.pack() lbl1=tkinter.Label(win,width=30,text="Student Number : ") lbl1.pack() en1=tkinter.Entry(win,width=30) en1.pack() lbl2=tkinter.Label(win,width=30,text="Name : ") lbl2.pack() en2=tkinter.Entry(win,width=30) en2.pack() lbl3=tkinter.Label(win,width=30,text="Age : ") lbl3.pack() en3=tkinter.Entry(win,width=30) en3.pack() lbl4=tkinter.Label(win,width=30,text="Birthday : ") lbl4.pack() en4=tkinter.Entry(win,width=30) en4.pack() lbl5=tkinter.Label(win,width=30,text="Address : ") lbl5.pack() en5=tkinter.Entry(win,width=30) en5.pack() lbl6=tkinter.Label(win,width=30,text="Email : ") lbl6.pack() en6=tkinter.Entry(win,width=30) en6.pack() lbl7=tkinter.Label(win,width=30,text="Course : ") lbl7.pack() en7=tkinter.Entry(win,width=30) en7.pack() lbl8=tkinter.Label(win,width=30,text="Year : ") lbl8.pack() en8=tkinter.Entry(win,width=30) en8.pack() lbl9=tkinter.Label(win,width=30,text="Section : ") lbl9.pack() en9=tkinter.Entry(win,width=30) en9.pack() btn1=tkinter.Button(win,background="#000",foreground="#ddd",width=30,text="Save Student",command=save) btn1.pack() def editRecord(): studentnum1="" def edit(): studentnum1=en10.get() studentnum="" name="" age="" birthday="" address="" email="" course="" year="" section="" con=sqlite3.connect("Students.db") cur=con.cursor() row=cur.fetchone() cur.execute("DELETE FROM student WHERE name = '%s'" % studentnum1) con.commit() def save(): studentnum=en1.get() name=en2.get() age=en3.get() birthday=en4.get() address=en5.get() email=en6.get() course=en7.get() year=en8.get() section=en8.get() student=(studentnum,name,age,email,birthday,address,email,course,year,section) cur.execute("INSERT INTO student(studentnum,name,age,email,birthday,address,email,course,year,section) VALUES(?,?,?,?,?,?,?,?,?)",student) con.commit() win=tkinter.Tk();win.title("Students") lbl=tkinter.Label(win,background="#000",foreground="#ddd",width=30,text="Edit Reocrd :"+'\t'+studentnum1) lbl.pack() lbl1=tkinter.Label(win,width=30,text="Student Number : ") lbl1.pack() en1=tkinter.Entry(win,width=30) en1.pack() lbl2=tkinter.Label(win,width=30,text="Name : ") lbl2.pack() en2=tkinter.Entry(win,width=30) en2.pack() lbl3=tkinter.Label(win,width=30,text="Age : ") lbl3.pack() en3=tkinter.Entry(win,width=30) en3.pack() lbl4=tkinter.Label(win,width=30,text="Birthday : ") lbl4.pack() en4=tkinter.Entry(win,width=30) en4.pack() lbl5=tkinter.Label(win,width=30,text="Address : ") lbl5.pack() en5=tkinter.Entry(win,width=30) en5.pack() lbl6=tkinter.Label(win,width=30,text="Email : ") lbl6.pack() en6=tkinter.Entry(win,width=30) en6.pack() lbl7=tkinter.Label(win,width=30,text="Course : ") lbl7.pack() en7=tkinter.Entry(win,width=30) en7.pack() lbl8=tkinter.Label(win,width=30,text="Year : ") lbl8.pack() en8=tkinter.Entry(win,width=30) en8.pack() lbl9=tkinter.Label(win,width=30,text="Section : ") lbl9.pack() en9=tkinter.Entry(win,width=30) en9.pack() btn1=tkinter.Button(win,background="#000",foreground="#ddd",width=30,text="Save Record",command=save) btn1.pack() win=tkinter.Tk();win.title("Edit Student") lbl=tkinter.Label(win,background="#000",foreground="#ddd",width=30,text="Edit Record") lbl.pack() lbl10=tkinter.Label(win,width=30,text="Student Number : ") lbl10.pack() en10=tkinter.Entry(win) en10.pack() btn2=tkinter.Button(win,background="#000",foreground="#ddd",width=30,text="Edit",command=edit) btn2.pack() def deleteRecord(): studentnum1="" win=tkinter.Tk();win.title("Delete Student Record") lbl=tkinter.Label(win,background="#000",foreground="#ddd",width=30,text="Delete Record") lbl.pack() lbl10=tkinter.Label(win,text="Student Number") lbl10.pack() en10=tkinter.Entry(win) en10.pack() def delete(): studentnum1=en10.get() con=sqlite3.connect("Students.db") cur=con.cursor() row=cur.fetchone() cur.execute("DELETE FROM student WHERE name = '%s';" % studentnum1) con.commit() win=tkinter.Tk();win.title("Record Deleted") lbl=tkinter.Label(win,background="#000",foreground="#ddd",width=30,text="Record Deleted :") lbl.pack() lbl=tkinter.Label(win,width=30,text=studentnum1) lbl.pack() btn=tkinter.Button(win,background="#000",foreground="#ddd",width=30,text="Ok",command=win.destroy) btn.pack() btn2=tkinter.Button(win,background="#000",foreground="#ddd",width=30,text="Delete",command=delete) btn2.pack() def viewRecord(): con=sqlite3.connect("Students.db") cur=con.cursor() win=tkinter.Tk();win.title("View Student Record"); row=cur.fetchall() lbl1=tkinter.Label(win,background="#000",foreground="#ddd",width=300,text="\n\tStudent Number"+"\t\tName"+"\t\tAge"+"\t\tBirthday"+"\t\tAddress"+"\t\tEmail"+"\t\tCourse"+"\t\tYear"+"\t\nSection") lbl1.pack() for row in cur.execute("SELECT * FROM student"): lbl2=tkinter.Label(win,width=300,text= row[0] + '\t\t' + row[1] + '\t' + row[2] + '\t\t' + row[3] + '\t\t' + row[4] + '\t\t' + row[5] + '\t\t' + row[6] + '\t\t' + row[7] + '\t\t' + row[8] + '\n') lbl2.pack() con.close() but1=tkinter.Button(win,background="#000",foreground="#fff", width=150,text="Close",command=win.destroy) but1.pack() root=tkinter.Tk();root.title("Student Records") menubar=tkinter.Menu(root) manage=tkinter.Menu(menubar,tearoff=0) manage.add_command(label='New Record',command=newRecord) manage.add_command(label='Edit Record',command=editRecord) manage.add_command(label='Delete Record',command=deleteRecord) menubar.add_cascade(label='Manage',menu=manage) view=tkinter.Menu(menubar,tearoff=0) view.add_command(label='View Record',command=viewRecord) menubar.add_cascade(label='View',menu=view) root.config(menu=menubar) lbl=tkinter.Label(root,background="#000",foreground="#ddd",font=("Verdana",15),width=30,text="Student Records") lbl.pack() lbl1=tkinter.Label(root,text="\nSubmitted by :") lbl1.pack() lbl2=tkinter.Label(root,text="Chavez, Vissia Nicole P") lbl2.pack() lbl3=tkinter.Label(root,text="BSIT 4-4") lbl3.pack()

    Read the article

  • Win Server 2k and Win 7 client

    - by Ray Kruse
    I have a Win Server 2000 system with AD configured. The network consists of an OKI printer, a network server, a wifi router a Win 2k client and the server. I'm trying to connect a Win 7 client. The purpose of the network, besides sharing equipment is to move files from client to client and scatter backups over more than 1 machine. The Win 7 client is configured for DHCP and does in fact receive it's IP and DNS configuration from the server and it sees the printer, wifi router and network drive, but does not see the Win 2k client nor the Win 2k server. I have tried the LAN Management Authentication Level set to 'Send LM & NTLM responses' with the 128 bit encryption removed. I've also done the registry hack on the key 'LmCompatibilityLevel'. Neither of these have helped. I have two questions: Is there a fix or is Win 2k totally incompatible? Is the best (or quickest/cheapest) fix to upgrade the server to Win 2k3 and not worry about the Win 2k client? Thanks for any help. Ray Kruse Buffalo, KY

    Read the article

  • Dual booting 12.10 and Win 7 - boots directly to Win 7

    - by user110174
    and thank you kindly for you help! I'll preface this with saying that I realize this is a common problem, with lots of trouble-shooting guides available online; however, after multiple attempts with different guides, I've made zero progress and am hoping to someone could help me with my specific scenario. First, my story: -Initially, I installed Ubuntu 12.10 with the "Something Else" option with no problems. Used 4 GB Swap Logical Partition, 26 GB Primary Root Partition. Wanting to trying out Mint 13, I booted into Windows from GRUB2, used the latest version of EasyBCD (v2.2) to restore the Windows 7 bootloader to the MBR, deleted the Ubuntu partitions, reformatted them in NTFS. I then created a 30 GB partition of free space for Mint. I installed Mint using the same partitioning described above for Ubuntu 12.10, using /dev/sda for the boot installation files, and everything seemed to go well, until I re-booted my computer and it went straight to Windows - I could find no way to get into Mint. So I went into windows, restored windows bootloader to the MBR w/ EasyBCD, deleted partitions, etc., as I figured I'd done enough messing around and would go with Ubuntu 12.10. Now the problem: I restarted my computer booting from the same Ubuntu USB key I originally used. Briefly, "error: "prefix" is not set" flashed on screen, and instead of being greeted with the GUI menu of "try vs. install Ubuntu", there was a menu with minimal graphics (like a BIOS menu) where I could select install, run from USB, etc. After selecting "Install Ubuntu", the familiar install wizard with a GUI came up, I partitioned my drive as described, /dev/sda for the boot installation files, install went well, rebooted and...straight to Windows. This is where I'm at. Fixes I've tried: -This guide: How can I repair grub? (How to get Ubuntu back after installing Windows?) to ensure Grub is on the MBR. I followed all steps, but still when I reboot, I go directly into Windows. -Installing 12.04 instead of 12.10 - same issue -Re-installed Ubuntu, writing the boot files to their own partition, then using EasyBCD to to add a boot option for Ubuntu using the Windows bootloader, ensuring I instruct EasyBCD to look at the partition I created with the Ubuntu installer (instructions here http://neosmart.net/wiki/display/EBCD/Ubuntu). When I reboot, I select the Ubuntu option, and it puts me in GRUB4DOS, with a cursor waiting for input. I have no idea what to put here, so I would just type "reboot" to exit out. And this is where I am now. Any clue as to why I can't boot into Ubuntu? My computer specs are: ASUS UX31A Core i7, Win 7 64 Pro, 256 GB SSD, Intel HM76 Chipset and Integrated Intel HD 4000 Graphics, 4 GB memory I've tried to be as clear as possible, but I'd be happy to provide any info that would help anyone along. Thanks for your patience in reading this! Sincerely, -MN

    Read the article

  • dual-boot (win-xp/ubu12.04) graphics card for ubu-desktop/win-xp-games

    - by iole1
    for work I need to get a a new and cheap graphics card for a dual boot machine: windows xp/ubuntu 12.04 LTS. The only requirements I have are: it should work 'flawlessly' in ubuntu (proprietary drivers are ok) it should handle Guild Wars 2 & League of Legends in windows xp (this is really the top priority as we need to be able to play at work :) - yes I have a cool job) I know nothing about graphics cards (and it seems to be a jungle out there). From other questions here and some webstigation I think I'd like to go for a Nvidia card, I've been trying to figure out what models fit the system req's but it seems they use different kind of model numbers so I don't get any wiser. tl;dr: will http://www.geforce.co.uk/hardware/desktop-gpus/geforce-gt-620-oem/specifications run Guild Wars 2 http://gamesystemrequirements.com/games.php?id=938 Or what is the worst card from nVidia that will run GW2 smoothly and work well in Ubuntu 12.04 Thanks!

    Read the article

  • man: command not found in zsh (Mac OS 10.58)

    - by Oscar
    I changed to zsh from the default (by changing the "Shells open with" preference in Terminal to "command (complete path)" set to /bin/zsh While most things seem to work, I tried to see the man page for a command and got a "permission denied" message. When I tried sudo, I got "man: command not found". I changed to the default shell (/bin/tcsh), and this is what I get when I open a new shell: Last login: Fri Nov 18 13:53:50 on ttys000 Fri Nov 18 13:55:21 CST 2011 /usr/bin/manpath: Permission denied. If I try man, I get the same "command not found message". I guess there is something wrong in my PATH, but I have no idea how to fix it. "echo $PATH" (in tcsh) gets: /sw/bin:/sw/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/texbin In zsh, it gets: /usr/bin:/bin:/sw/bin:/usr/local/bin:/usr/local/teTeX/bin/powerpc-apple-darwin-current:/usr/sbin:/sbin:/usr/texbin:/usr/X11/bin Any ideas?

    Read the article

  • TCP RST right after FIN/ACK

    - by Nitzan Shaked
    I am having the weirdest issue: I have a web server which sometimes, only on very specific requests, will send a RST to the client after having sent the FIN datagram. First, a description of the setup: The server runs on an Ubuntu 12.04.1 LTS, which itself is a VM guest inside a Win7 x64 host, in bridged mode. ufw is disabled on the host The client runs on a iOS simulator, which runs on OS X Mountain Lion, which is a VM guest (hackintosh) inside a Win7 x64 host, in bridged mode. Both client and server are on the same LAN, one is connected to the home router via an Ethernet cable, and then other thru WiFi. I happened to glimpse over the server's http logs and found that the client sometimes issuing multiple subsequent identical requests. Further investigation led me to discover that this happens when the server sends a RST, and that the client is simply re-trying. I am attaching several tcpdump's: Good1 is the server-side tcpdump of a good session ("good" meaning no RST was generated). Good3 is another sever-side tcpdump of a good session. (The difference between Good1 and Good3 is the order in which ACK's were sent from the server to the client, ACK'ing the client's request. The client's request arives in 2 segements (specifically: one for the http headers, and another for a body containing an empty json object, "{}"). In Good1, the server ACK's both request segments, using 2 ACK segments, after the second request has arrived. In Good3, the server ACK's each request segment with an ACK segment as soon as the request segment arrives. Not that it should make a difference.) Bad1 is a dump, both client- and server-side, of a bad session. Bad2 is another bad session, this time server-side only. Note that in all "bad" sessions, the server ACK's each request segments immediately after having received it. I've looked at a few other bad sessions, and the situation is the same in all of them. But this is also the behavior in "Good3", so I don't see how that observation helps me, of for that matter why it should matter. I can't find any difference between good and bad sessions, or at least one that I think should matter. My question is: why are those RST's being generated? Or at least: how do I go about debugging this, or providing more info here that'll help? Edit 2 new facts that I have learned: Section 4.2.2.13 of the RFC (1122) (and Wikipedia, in the article "TCP", under "Connection Termination") says that a TCP application on one host may close the connection before it has read all of the data in its socket buffer, and in such a case the TCP on the host will sent a RST to the other side, to let it know that not all the data it has sent has been read. I'm not sure I completely understand this, since closing my side of the connection still allows me to read, no? It also means that I can't write any more. I am not sure this is relevant, though, since I see a RST after FIN. There are multiple complaints of this happening with wsgiref (Python's dev-mode HTTP server), which is exactly what I'm using. I'll keep updating as I find out more. Thanks! ~~~~~~~~~~~~~~~~~~~~ Good1 -- Server Side ~~~~~~~~~~~~~~~~~~~~ 13:28:02.308319 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [S], seq 94268074, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943308864 ecr 0,sackOK,eol], length 0 13:28:02.308336 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [S.], seq 1726304574, ack 94268075, win 14480, options [mss 1460,sackOK,TS val 326480982 ecr 943308864,nop,wscale 3], length 0 13:28:02.309750 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943308865 ecr 326480982], length 0 13:28:02.310744 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943308865 ecr 326480982], length 350 13:28:02.310766 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943308865 ecr 326480982], length 2 13:28:02.310841 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326480983 ecr 943308865], length 0 13:28:02.310918 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326480983 ecr 943308865], length 0 13:28:02.315931 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326480984 ecr 943308865], length 17 13:28:02.316107 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326480984 ecr 943308865], length 666 13:28:02.317651 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943308872 ecr 326480984], length 0 13:28:02.318288 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943308872 ecr 326480984], length 0 13:28:02.318640 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [F.], seq 353, ack 685, win 8192, options [nop,nop,TS val 943308872 ecr 326480984], length 0 13:28:02.318651 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [.], ack 354, win 1944, options [nop,nop,TS val 326480985 ecr 943308872], length 0 ~~~~~~~~~~~~~~~~~~~~ Good3 -- Server Side ~~~~~~~~~~~~~~~~~~~~ 13:28:03.311143 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [S], seq 1982901126, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943309853 ecr 0,sackOK,eol], length 0 13:28:03.311155 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [S.], seq 2245063571, ack 1982901127, win 14480, options [mss 1460,sackOK,TS val 326481233 ecr 943309853,nop,wscale 3], length 0 13:28:03.312671 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943309854 ecr 326481233], length 0 13:28:03.313330 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943309855 ecr 326481233], length 350 13:28:03.313337 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326481234 ecr 943309855], length 0 13:28:03.313342 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943309855 ecr 326481233], length 2 13:28:03.313346 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326481234 ecr 943309855], length 0 13:28:03.327942 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326481237 ecr 943309855], length 17 13:28:03.328253 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326481237 ecr 943309855], length 666 13:28:03.329076 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943309868 ecr 326481237], length 0 13:28:03.329688 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943309868 ecr 326481237], length 0 13:28:03.330361 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [F.], seq 353, ack 685, win 8192, options [nop,nop,TS val 943309869 ecr 326481237], length 0 13:28:03.330370 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [.], ack 354, win 1944, options [nop,nop,TS val 326481238 ecr 943309869], length 0 ~~~~~~~~~~~~~~~~~~~~ Bad1 -- Server Side ~~~~~~~~~~~~~~~~~~~~ 13:28:01.311876 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [S], seq 920400580, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943307883 ecr 0,sackOK,eol], length 0 13:28:01.311896 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [S.], seq 3103085782, ack 920400581, win 14480, options [mss 1460,sackOK,TS val 326480733 ecr 943307883,nop,wscale 3], length 0 13:28:01.313509 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943307884 ecr 326480733], length 0 13:28:01.315614 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943307886 ecr 326480733], length 350 13:28:01.315727 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326480734 ecr 943307886], length 0 13:28:01.316229 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943307886 ecr 326480733], length 2 13:28:01.316242 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326480734 ecr 943307886], length 0 13:28:01.321019 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326480735 ecr 943307886], length 17 13:28:01.321294 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307886], length 666 13:28:01.321386 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R.], seq 685, ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307886], length 0 13:28:01.322727 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943307891 ecr 326480735], length 0 13:28:01.322733 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R], seq 3103085800, win 0, length 0 13:28:01.323221 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943307892 ecr 326480736], length 0 13:28:01.323231 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R], seq 3103086467, win 0, length 0 ~~~~~~~~~~~~~~~~~~~~ Bad1 -- Client Side ~~~~~~~~~~~~~~~~~~~~ 13:28:11.374654 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [S], seq 920400580, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943307883 ecr 0,sackOK,eol], length 0 13:28:11.375764 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [S.], seq 3103085782, ack 920400581, win 14480, options [mss 1460,sackOK,TS val 326480733 ecr 943307883,nop,wscale 3], length 0 13:28:11.376352 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943307884 ecr 326480733], length 0 13:28:11.378252 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943307886 ecr 326480733], length 350 13:28:11.379027 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943307886 ecr 326480733], length 2 13:28:11.379732 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326480734 ecr 943307886], length 0 13:28:11.380592 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326480734 ecr 943307886], length 0 13:28:11.384968 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326480735 ecr 943307886], length 17 13:28:11.385044 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943307891 ecr 326480735], length 0 13:28:11.385586 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307886], length 666 13:28:11.385743 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943307892 ecr 326480736], length 0 13:28:11.385966 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R.], seq 685, ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307886], length 0 13:28:11.387343 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R], seq 3103085800, win 0, length 0 13:28:11.387344 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R], seq 3103086467, win 0, length 0 ~~~~~~~~~~~~~~~~~~~~ Bad2 -- Server Side ~~~~~~~~~~~~~~~~~~~~ 13:28:01.319185 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [S], seq 1631526992, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943307889 ecr 0,sackOK,eol], length 0 13:28:01.319197 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [S.], seq 2524685719, ack 1631526993, win 14480, options [mss 1460,sackOK,TS val 326480735 ecr 943307889,nop,wscale 3], length 0 13:28:01.320692 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943307890 ecr 326480735], length 0 13:28:01.322219 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943307890 ecr 326480735], length 350 13:28:01.322336 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326480736 ecr 943307890], length 0 13:28:01.322689 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943307890 ecr 326480735], length 2 13:28:01.322700 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307890], length 0 13:28:01.326307 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326480737 ecr 943307890], length 17 13:28:01.326614 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326480737 ecr 943307890], length 666 13:28:01.326710 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [R.], seq 685, ack 353, win 1944, options [nop,nop,TS val 326480737 ecr 943307890], length 0 13:28:01.328499 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943307896 ecr 326480737], length 0 13:28:01.328509 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [R], seq 2524685737, win 0, length 0 13:28:01.328514 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943307896 ecr 326480737], length 0 13:28:01.328517 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [R], seq 2524686404, win 0, length 0

    Read the article

  • Virtual Win XP Mode stopped HP LJ Pro M1212nf MFP printing in Win 7 Pro

    - by Dee
    Virtual Win XP Mode stopped HP LJ Pro M1212nf MFP printing in Win 7 Pro: I am running Windows 7 Pro with Virtual Windows XP Mode. My printer is HP LaserJet Pro M1212nf MFP attached directly to a USB port of the computer. This printer was working fine in Windows 7, until I tried to attach the printer to the Virtual Windows XP Mode in order to load the printer driver in the Virtual Windows XP Mode. At that point, the printer disappeared from the list of USB devices on the toolbar at the top of the window of the Virtual Windows XP Mode. After installing the printer driver in the Virtual Windows XP Mode, the printer did not work in that mode and also no longer worked in Windows 7. In Windows 7 and in the Virtual Windows XP Mode, print files are sent to the print queue, but are never printed. In Windows 7, the print queue states that the printer is offline. In the Virtual Windows XP Mode, the printer can be toggled from "Print Offline" to "Print Online", but no print files are ever printed from the print queue. The printer acts as though it is no longer connected to the computer, even though it is still physically connected to the USB port of the computer. How can I get the printer to work again in Windows 7? (At this point, I am no longer interested in using the Virtual Windows XP Mode.) I have tried a large number of things to find and fix the printer problem, but have had no success. Device Manager cannot see the printer even though it is physically connected via USB port (have tried different USB ports) to the computer. Restoring Win 7 and Virtual Win XP Mode to times before the problem does not fix the problem. How can I get the computer to see the printer, so that I can print again in Win 7?

    Read the article

  • Convert info pages to man pages

    - by mbac32768
    I was invited to re-post this question with less opinion, so if it seems familiar, that's why. How can I convert info pages into man pages? I used to have a shell one liner that flattened an entire info document into a single flat page, suitable for navigating with less, but I seem to have lost it. Thanks!

    Read the article

  • BSD route(8) MAN page bug

    - by Farseeker
    http://www.freebsd.org/cgi/man.cgi?query=route Route is a utility used to manually manipulate the network routing tables. It normally is not needed, as a system routing table management daemon such as routed(8), should tend to this task. ... BUGS The first paragraph may have slightly exaggerated routed(8)'s abilities. Is this really a "bug", or some developer's attempt at humour?

    Read the article

  • Searching for a specific option in a man page

    - by mitch_feaster
    I often find myself man'ing a command just to learn about one specific option. Most of the time I can search to the option just fine, unless it's something like ffmpeg or gcc where I have to step through about 40 matches until I get to the actual description of the option... Sometimes I can get lucky and search for the word "options" to get close and then refine it from there, but it would be nice if I could reliably jump straight to the option in question. It would be cool if there was a tool that could parse out the options and build a database on which you could do searches, but after looking at the groff markup for a few pages I've determined it would only be a best-guess effort due to the lack of meta-information in groff markup... In my ideal world woman mode in emacs would support searching for specific options... :) Any tips for jumping straight to a specific option in a man page?

    Read the article

  • Detecting man-in-the-middle attacks?

    - by Ilari Kajaste
    There seem to be many possible ways to create man-in-the-middle attacks on public access points, by stealing the access point's local IP address with ARP spoofing. The possible attacks range from forging password request fields, to changing HTTPS connections to HTTP, and even the recently discovered possibilit of injecting malicious headers in the beginning of secure TLS connections. However, it seems to be claimed that these attacks are not very common. It would be interesting to see for myself. What ways are there to detect if such an attack is being attempted by someone on the network? I guess getting served a plain HTTP login page would be an obvious clue, and of course you could run Wireshark and keep reading all the interesting ARP traffic... But an automated solution would be a tiny bit more handy. Something that analyzes stuff on the background and alerts if an attack is detected on the network. It would be interesting to see for myself if these attack are actually going on somewhere.

    Read the article

  • Best way to author man pages?

    - by vy32
    What's the best way to author man pages? Should I write using the standard man macros, or is there some clever package available now that takes some kind of XML-ified source and can output man pages, HTML, ASCII, and what not? Thanks

    Read the article

  • Win XP / Win 7 Compatability

    - by Susan
    I run Win XP and my mother is getting a new PC with Win 7. We go remote quite frequently using Windows Messenger Remote Assistance. Will we still be able to do this when she gets the new PC?

    Read the article

  • Embed Google’s Pac Man Game On Your Website

    - by Gopinath
    Google is celebrating the 30th anniversary of Pac-Man with a playable Pac Man game doodle on it’s home page. You can play the full game(255 levels) at http://google.com. This is the first time ever Google released an interactive doodle. How To Embed the Pac Man Game In Your Web Pages? I’m surprised to see this game being a non-flash version and it seems to be a pure javascript + html script. Michael at RustyBricks.com published an unofficial way of embedding Google’s Pac Man game in any website along with a link to demo page. Check out How To Get Google’s Pac Man Game On Your Page for a quick script to have this game for your website users. Join us on Facebook to read all our stories right inside your Facebook news feed.

    Read the article

  • DESIGNING FOR WIN PHONE 7

    Designing applications for the Win Phone 7 is very similar to designing for print. In my opinion, it feels like a cross between a tri-fold brochure and a poster. I based my prototype designs on Microsofts Metro style guide, with typography as the main focus and stunning imagery for support. Its nice to have fixed factors regulating the design, making it a fun and fresh design experience. Microsoft provides a UI Design Guidelines document that outlines layout sizes, background image size, recommended typefaces and spacing. You know what you are designing for and you know how it will look and act on the win phone 7 platform. Although applications are not required to strictly adhere to the Metro style guide I feel it makes the best use of the panorama view  and navigation. With strong examples of this UI concept in place like their Zune-like music + videos hub, I found it fairly easy to put together a few quick app mockups (see below). In addition to design guidelines, using a ready built design templates, or a win phone 7 specific panorama control like the one by Clarity Consulting will make the process of bringing your designs to life much more efficient. Likes, Dislikes, and Challenges I think the idea of the hub is completely intuitive. This concept clearly breaks down info into more manageable pieces, and greatly helps with organization when designing for the phone. I like the chromeless appearance, allowing the core functionality of the application to take precedence over gradients, textures, bevels, drop shadows, and the complicated animations you see on the web. Although I understand the Win Phone 7 guidelines are a work in progress, I found a few contradictions. I also noticed that certain design specifications did not translate well to the phone emulator . If you use their guidelines as suggested best practices and not as fixed definitions you will have more success. Multi-directional vs Linear The main challenge I had was stepping away from familiar navigational examples seen in other mobile phones. I had to keep reminding myself that the content to the right and to the left of what I was working on didnt necessarily have to have a direct link to one another. I started thinking multi-directional as opposed to linear. Win phone 7 vs IPhone The Metro styling of the Win Phone 7 is similar to the Zune HD and the Windows Media Center UI and offers a different interface paradigm than the IPhone. When navigating an application it feels like you are panning a long seamless page of information in contrast to the multiple panels of an IPhone. I think there is less of an opportunity to overdesign your application, which happens often with IPhone applications. While both interfaces are simple and sleek, win phone 7 really gets down to the basics. IPhone sets a high standard for designing for touch, designing for win phone 7 could improve on that user experience with a consistent and strategic use of white space and staying away from a menu and icon heavy UI. Design Examples for Win Phone 7 Applications Here are some concepts for both generic and brand specific applications for Win Phone 7: View Full Album Resources to get you going with your own Win Phone 7 design: Helpful design templates for Win Phone 7  http://www.shazaml.com/archives/windows-phone-7-ui-templates Here is the interaction design guide for Win Phone 7 http://go.microsoft.com/?linkid=9713252 Windows has a project template for Blend 4 and Visual Studio 2010 RC1 http://developer.windowsphone.com/ Clarity Consulting developed a panorama control for Win Phone 7 http://blogs.claritycon.com/blogs/design/archive/2010/03/30/building-the-elusive-windows-phone-panorama-control.aspxDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • DESIGNING FOR WIN PHONE 7

    Designing applications for the Win Phone 7 is very similar to designing for print. In my opinion, it feels like a cross between a tri-fold brochure and a poster. I based my prototype designs on Microsofts Metro style guide, with typography as the main focus and stunning imagery for support. Its nice to have fixed factors regulating the design, making it a fun and fresh design experience. Microsoft provides a UI Design Guidelines document that outlines layout sizes, background image size, recommended typefaces and spacing. You know what you are designing for and you know how it will look and act on the win phone 7 platform. Although applications are not required to strictly adhere to the Metro style guide I feel it makes the best use of the panorama view  and navigation. With strong examples of this UI concept in place like their Zune-like music + videos hub, I found it fairly easy to put together a few quick app mockups (see below). In addition to design guidelines, using a ready built design templates, or a win phone 7 specific panorama control like the one by Clarity Consulting will make the process of bringing your designs to life much more efficient. Likes, Dislikes, and Challenges I think the idea of the hub is completely intuitive. This concept clearly breaks down info into more manageable pieces, and greatly helps with organization when designing for the phone. I like the chromeless appearance, allowing the core functionality of the application to take precedence over gradients, textures, bevels, drop shadows, and the complicated animations you see on the web. Although I understand the Win Phone 7 guidelines are a work in progress, I found a few contradictions. I also noticed that certain design specifications did not translate well to the phone emulator . If you use their guidelines as suggested best practices and not as fixed definitions you will have more success. Multi-directional vs Linear The main challenge I had was stepping away from familiar navigational examples seen in other mobile phones. I had to keep reminding myself that the content to the right and to the left of what I was working on didnt necessarily have to have a direct link to one another. I started thinking multi-directional as opposed to linear. Win phone 7 vs IPhone The Metro styling of the Win Phone 7 is similar to the Zune HD and the Windows Media Center UI and offers a different interface paradigm than the IPhone. When navigating an application it feels like you are panning a long seamless page of information in contrast to the multiple panels of an IPhone. I think there is less of an opportunity to overdesign your application, which happens often with IPhone applications. While both interfaces are simple and sleek, win phone 7 really gets down to the basics. IPhone sets a high standard for designing for touch, designing for win phone 7 could improve on that user experience with a consistent and strategic use of white space and staying away from a menu and icon heavy UI. Design Examples for Win Phone 7 Applications Here are some concepts for both generic and brand specific applications for Win Phone 7: View Full Album Resources to get you going with your own Win Phone 7 design: Helpful design templates for Win Phone 7  http://www.shazaml.com/archives/windows-phone-7-ui-templates Here is the interaction design guide for Win Phone 7 http://go.microsoft.com/?linkid=9713252 Windows has a project template for Blend 4 and Visual Studio 2010 RC1 http://developer.windowsphone.com/ Clarity Consulting developed a panorama control for Win Phone 7 http://blogs.claritycon.com/blogs/design/archive/2010/03/30/building-the-elusive-windows-phone-panorama-control.aspxDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >