Search Results

Search found 244 results on 10 pages for 'fprintf'.

Page 1/10 | 1 2 3 4 5 6 7 8 9 10  | Next Page >

  • Write and fprintf for file I/O

    - by Darryl Gove
    fprintf() does buffered I/O, where as write() does unbuffered I/O. So once the write() completes, the data is in the file, whereas, for fprintf() it may take a while for the file to get updated to reflect the output. This results in a significant performance difference - the write works at disk speed. The following is a program to test this: #include <fcntl.h #include <unistd.h #include <stdio.h #include <stdlib.h #include <errno.h #include <stdio.h #include <sys/time.h #include <sys/types.h #include <sys/stat.h static double s_time; void starttime() { s_time=1.0*gethrtime(); } void endtime(long its) { double e_time=1.0*gethrtime(); printf("Time per iteration %5.2f MB/s\n", (1.0*its)/(e_time-s_time*1.0)*1000); s_time=1.0*gethrtime(); } #define SIZE 10*1024*1024 void test_write() { starttime(); int file = open("./test.dat",O_WRONLY|O_CREAT,S_IWGRP|S_IWOTH|S_IWUSR); for (int i=0; i<SIZE; i++) { write(file,"a",1); } close(file); endtime(SIZE); } void test_fprintf() { starttime(); FILE* file = fopen("./test.dat","w"); for (int i=0; i<SIZE; i++) { fprintf(file,"a"); } fclose(file); endtime(SIZE); } void test_flush() { starttime(); FILE* file = fopen("./test.dat","w"); for (int i=0; i<SIZE; i++) { fprintf(file,"a"); fflush(file); } fclose(file); endtime(SIZE); } int main() { test_write(); test_fprintf(); test_flush(); } Compiling and running I get 0.2MB/s for write() and 6MB/s for fprintf(). A large difference. There's three tests in this example, the third test uses fprintf() and fflush(). This is equivalent to write() both in performance and in functionality. Which leads to the suggestion that fprintf() (and other buffering I/O functions) are the fastest way of writing to files, and that fflush() should be used to enforce synchronisation of the file contents.

    Read the article

  • putting data from a for loop into a table using matlab and fprintf

    - by user2928537
    I am trying to put the following data from my for loop into a table formatted so that there are 11 values of F in each column, with a total of 4 columns. but I am always ending up with one long column of my data instead of the four columns I want. I was wondering if there is some way to put the data into a matrix and then reshape it, but I am having trouble. Any help greatly appreciated. fprintf ('Electrostatic Forces:\n') for r = 1:4; q2 = 0: 1*10^-19: 1*10^-18; for F = coulomb(q2,r); fprintf ('%d\n',F) end end Where the code for the function coulomb is function F = coulomb (q2,r); k = 8.98*10^9; q1 = 1.6*10^-19; F = k*abs(q1*q2)/r^2; end

    Read the article

  • problem using fprintf

    - by shiran bar
    I'm trying to print to a text file numerous variables yet it doesn't work. I checked and verified that i write it in the correct syntax. I also checked the return value and it's positive therefore i know it did write to the file, however when i open the file it's empty. I would be happy for some help. This is the code: I initiate DynsaleDayPtr in the main: FILE* DynsaleDayPtr = CreateTextFiles("sale_day.txt"); Create function: FILE* CreateTextFiles (char* fileName) { FILE* saleFilePtr=NULL; if((saleFilePtr=fopen(fileName,"a+"))==NULL) printf("File couldn't be opened\n"); return saleFilePtr; } The call to the function TextAddSale is done from a function that is called in the main: TextAddSale(DynSaleDayPtr,dynNumOfRecords); Bool TextAddSale (FILE* DynsaleDayPtr, int* dynNumOfRecords) { char id[6]; char name [50]; char priceChar[20]; char* tmp = NULL; int price=-1; DynamicRecord * newRec=NULL; scanf("%s%s%s",id,name,priceChar); newRec = (DynamicRecord *)malloc(sizeof(DynamicRecord)); if (newRec == NULL) return False; tmp = (char*)malloc(strlen(name)+1); if (tmp == NULL) { free (newRec); return False; } strcpy(tmp,name); newRec->productName = tmp; strcpy(newRec->productId, id); newRec->productPrice=atoi (priceChar); if (fprintf(DynsaleDayPtr,"%d %s %s %d", strlen(newRec->productName), newRec->productId, newRec->productName, newRec->productPrice)>0) { *dynNumOfRecords=(*dynNumOfRecords)+1; return True; } } thanks!

    Read the article

  • error in coding a lexer in c

    - by mekasperasky
    #include<stdio.h> #include<ctype.h> #include<string.h> /* this is a lexer which recognizes constants , variables ,symbols, identifiers , functions , comments and also header files . It stores the lexemes in 3 different files . One file contains all the headers and the comments . Another file will contain all the variables , another will contain all the symbols. */ int main() { int i=0,j,k,count=0; char a,b[100],c[10000],d[100]; memset ( d, 0, 100 ); j=30; FILE *fp1,*fp2; fp1=fopen("source.txt","r"); //the source file is opened in read only mode which will passed through the lexer fp2=fopen("lext.txt","w"); //now lets remove all the white spaces and store the rest of the words in a file if(fp1==NULL) { perror("failed to open source.txt"); //return EXIT_FAILURE; } i=0; k=0; while(!feof(fp1)) { a=fgetc(fp1); if(a!=' '&&a!='\n') { if (!isalpha(a)) { switch(a) { case '+':{fprintf(fp2,"+ ----> PLUS \n"); i=0;break;} case '-':{fprintf(fp2,"- ---> MINUS \n"); i=0;break;} case '*':{fprintf(fp2, "* --->MULT \n"); i=0;break;} case '/':{fprintf(fp2, "/ --->DIV \n"); i=0;break;} //case '+=':fprintf(fp2, "%.20s\n", "ADD_ASSIGN"); //case '-=':fprintf(fp2, "%.20s\n", "SUB_ASSIGN"); case '=':{fprintf(fp2, "= ---> ASSIGN \n"); i=0;break;} case '%':{fprintf(fp2, "% ---> MOD \n"); i=0;break;} case '<':{fprintf(fp2, "< ---> LESSER_THAN \n"); i=0;break;} case '>':{fprintf(fp2, "> --> GREATER_THAN \n"); i=0;break;} //case '++':fprintf(fp2, "%.20s\n", "INCREMENT"); //case '--':fprintf(fp2, "%.20s\n", "DECREMENT"); //case '==':fprintf(fp2, "%.20s\n", "ASSIGNMENT"); case ';':{fprintf(fp2, "; --->SEMI_COLUMN \n"); i=0;break;} case ':':{fprintf(fp2, ": --->COLUMN \n"); i=0;break;} case '(':{fprintf(fp2, "( --->LPAR \n"); i=0;break;} case ')':{fprintf(fp2, ") --->RPAR \n"); i=0;break;} case '{':{fprintf(fp2, "{ --->LBRACE \n"); i=0;break;} case '}':{fprintf(fp2, "} ---> RBRACE \n"); i=0;break;} } } else { d[i]=a; //printf("%c\n",d[i]); i=i+1; } //} /* we can make the lexer more complex by including even more depths of checks for the symbols*/ } else { d[i+1]='\0'; printf("\n"); if((strcmp(d,"if ")==0)){fprintf(fp2,"if ----> IDENTIFIER \n"); //printf("%s \n",d); memset ( d, 0, 100 ); //printf("%s \n",d); count=count+1;} else if(strcmp(d,"then")==0){fprintf(fp2,"then ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"else")==0){fprintf(fp2,"else ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"switch")==0){fprintf(fp2,"switch ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"printf")==0){fprintf(fp2,"prtintf ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"scanf")==0){fprintf(fp2,"scanf ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"NULL")==0){fprintf(fp2,"NULL ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"int")==0){fprintf(fp2,"INT ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"char")==0){fprintf(fp2,"char ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"float")==0){fprintf(fp2,"float ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"long")==0){fprintf(fp2,"long ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"double")==0){fprintf(fp2,"double ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"const")==0){fprintf(fp2,"const ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"continue")==0)fprintf(fp2,"continue ----> IDENTIFIER \n"); else if(strcmp(d,"size of")==0){fprintf(fp2,"size of ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"register")==0){fprintf(fp2,"register ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"short")==0){fprintf(fp2,"short ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"auto")==0){fprintf(fp2,"auto ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"while")==0){fprintf(fp2,"while ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"do")==0){fprintf(fp2,"do ----> IDENTIFIER \n"); count=count+1;} else if(strcmp(d,"case")==0){fprintf(fp2,"case ----> IDENTIFIER \n"); count=count+1;} else if (isdigit(d[i])) { fprintf(fp2,"%s ---->NUMBER",d); } else if (isalpha(a)) { fprintf(fp2,"%s ----> Variable",d); //printf("%s",d); // memset ( d, 0, 100 );} //fprintf(fp2, "s\n", b); i=0; k=k+1; continue; } i=i+1; k=k+1; } fclose(fp1); fclose(fp2); printf("%d",count); return 0; } In this code , my source.txt has if (a+b) stored . But only ( , + and ) is getting written into lext.txt and not the identifier if or the variable a and b . Any particular reason why?

    Read the article

  • MPI C fprintf() output not showing up if the process hangs on MPI_Recv

    - by Karolis
    I'm writing an MPI C program. I have troubles debugging it, because whenever I use fprintf, like this: fprintf(stdout, "worker: %d", worker); if the program hangs, because of some blocking MPI_Recv, I can't see any output. I'm sure the line of code is reached, because I can put a return statement after the fprintf statement, in which case the process finishes execution and the output is printed. Any ideas, on how to print (see the output) even though the process gets blocked later by Recv? I hope this makes sense.

    Read the article

  • fprintf() within a subprogram

    - by sergio
    Im stuck when trying to write to my file within my subprogram. void new_page(float *a, float *b, float *c, int *d){ fprintf(results,"\nPage Totals: %f\t%f\t%f\t%d", *a,*b,*c,*d); } I get a warning saying "Warning: incompatible implicit declaration of built-in function 'fprinf' [enabled by default]" "error: 'results' undeclared (first use in this function)" in main fprintf works fine, its just when it comes to the subprogram/function it wont work. from my understanding it thinks that results is undeclared, so do i have to pass the name or location of the file to make it work?

    Read the article

  • i am using winsock2.h in c language the following errors are unuderstandable help required?

    - by moon
    i am going to paste here my code an errors :::: #include "stdio.h" #include "winsock2.h" #define SIO_RCVALL _WSAIOW(IOC_VENDOR,1) //this removes the need of mstcpip.h void StartSniffing (SOCKET Sock); //This will sniff here and there void ProcessPacket (unsigned char* , int); //This will decide how to digest void PrintIpHeader (unsigned char* , int); void PrintUdpPacket (unsigned char* , int); void ConvertToHex (unsigned char* , unsigned int); void PrintData (unsigned char* , int); //IP Header Structure typedef struct ip_hdr { unsigned char ip_header_len:4; // 4-bit header length (in 32-bit words) normally=5 (Means 20 Bytes may be 24 also) unsigned char ip_version :4; // 4-bit IPv4 version unsigned char ip_tos; // IP type of service unsigned short ip_total_length; // Total length unsigned short ip_id; // Unique identifier unsigned char ip_frag_offset :5; // Fragment offset field unsigned char ip_more_fragment :1; unsigned char ip_dont_fragment :1; unsigned char ip_reserved_zero :1; unsigned char ip_frag_offset1; //fragment offset unsigned char ip_ttl; // Time to live unsigned char ip_protocol; // Protocol(TCP,UDP etc) unsigned short ip_checksum; // IP checksum unsigned int ip_srcaddr; // Source address unsigned int ip_destaddr; // Source address } IPV4_HDR; //UDP Header Structure typedef struct udp_hdr { unsigned short source_port; // Source port no. unsigned short dest_port; // Dest. port no. unsigned short udp_length; // Udp packet length unsigned short udp_checksum; // Udp checksum (optional) } UDP_HDR; //ICMP Header Structure typedef struct icmp_hdr { BYTE type; // ICMP Error type BYTE code; // Type sub code USHORT checksum; USHORT id; USHORT seq; } ICMP_HDR; FILE *logfile; int tcp=0,udp=0,icmp=0,others=0,igmp=0,total=0,i,j; struct sockaddr_in source,dest; char hex[2]; //Its free! IPV4_HDR *iphdr; UDP_HDR *udpheader; int main() { SOCKET sniffer; struct in_addr addr; int in; char hostname[100]; struct hostent *local; WSADATA wsa; //logfile=fopen("log.txt","w"); //if(logfile==NULL) printf("Unable to create file."); //Initialise Winsock printf("\nInitialising Winsock..."); if (WSAStartup(MAKEWORD(2,2), &wsa) != 0) { printf("WSAStartup() failed.\n"); return 1; } printf("Initialised"); //Create a RAW Socket printf("\nCreating RAW Socket..."); sniffer = socket(AF_INET, SOCK_RAW, IPPROTO_IP); if (sniffer == INVALID_SOCKET) { printf("Failed to create raw socket.\n"); return 1; } printf("Created."); //Retrive the local hostname if (gethostname(hostname, sizeof(hostname)) == SOCKET_ERROR) { printf("Error : %d",WSAGetLastError()); return 1; } printf("\nHost name : %s \n",hostname); //Retrive the available IPs of the local host local = gethostbyname(hostname); printf("\nAvailable Network Interfaces : \n"); if (local == NULL) { printf("Error : %d.\n",WSAGetLastError()); return 1; } for (i = 0; local->h_addr_list[i] != 0; ++i) { memcpy(&addr, local->h_addr_list[i], sizeof(struct in_addr)); printf("Interface Number : %d Address : %s\n",i,inet_ntoa(addr)); } printf("Enter the interface number you would like to sniff : "); scanf("%d",&in); memset(&dest, 0, sizeof(dest)); memcpy(&dest.sin_addr.s_addr,local->h_addr_list[in],sizeof(dest.sin_addr.s_addr)); dest.sin_family = AF_INET; dest.sin_port = 0; printf("\nBinding socket to local system and port 0 ..."); if (bind(sniffer,(struct sockaddr *)&dest,sizeof(dest)) == SOCKET_ERROR) { printf("bind(%s) failed.\n", inet_ntoa(addr)); return 1; } printf("Binding successful"); //Enable this socket with the power to sniff : SIO_RCVALL is the key Receive ALL ;) j=1; printf("\nSetting socket to sniff..."); if (WSAIoctl(sniffer, SIO_RCVALL,&j, sizeof(j), 0, 0,(LPDWORD)&in,0, 0) == SOCKET_ERROR) { printf("WSAIoctl() failed.\n"); return 1; } printf("Socket set."); //Begin printf("\nStarted Sniffing\n"); printf("Packet Capture Statistics...\n"); StartSniffing(sniffer); //Happy Sniffing //End closesocket(sniffer); WSACleanup(); return 0; } void StartSniffing(SOCKET sniffer) { unsigned char *Buffer = ( unsigned char *)malloc(65536); //Its Big! int mangobyte; if (Buffer == NULL) { printf("malloc() failed.\n"); return; } do { mangobyte = recvfrom(sniffer,(char *)Buffer,65536,0,0,0); //Eat as much as u can if(mangobyte > 0) ProcessPacket(Buffer, mangobyte); else printf( "recvfrom() failed.\n"); } while (mangobyte > 0); free(Buffer); } void ProcessPacket(unsigned char* Buffer, int Size) { iphdr = (IPV4_HDR *)Buffer; ++total; switch (iphdr->ip_protocol) //Check the Protocol and do accordingly... { case 1: //ICMP Protocol ++icmp; //PrintIcmpPacket(Buffer,Size); break; case 2: //IGMP Protocol ++igmp; break; case 6: //TCP Protocol ++tcp; //PrintTcpPacket(Buffer,Size); break; case 17: //UDP Protocol ++udp; PrintUdpPacket(Buffer,Size); break; default: //Some Other Protocol like ARP etc. ++others; break; } printf("TCP : %d UDP : %d ICMP : %d IGMP : %d Others : %d Total : %d\r",tcp,udp,icmp,igmp,others,total); } void PrintIpHeader (unsigned char* Buffer, int Size) { unsigned short iphdrlen; iphdr = (IPV4_HDR *)Buffer; iphdrlen = iphdr->ip_header_len*4; memset(&source, 0, sizeof(source)); source.sin_addr.s_addr = iphdr->ip_srcaddr; memset(&dest, 0, sizeof(dest)); dest.sin_addr.s_addr = iphdr->ip_destaddr; fprintf(logfile,"\n"); fprintf(logfile,"IP Header\n"); fprintf(logfile," |-IP Version : %d\n",(unsigned int)iphdr->ip_version); fprintf(logfile," |-IP Header Length : %d DWORDS or %d Bytes\n",(unsigned int)iphdr->ip_header_len); fprintf(logfile," |-Type Of Service : %d\n",(unsigned int)iphdr->ip_tos); fprintf(logfile," |-IP Total Length : %d Bytes(Size of Packet)\n",ntohs(iphdr->ip_total_length)); fprintf(logfile," |-Identification : %d\n",ntohs(iphdr->ip_id)); fprintf(logfile," |-Reserved ZERO Field : %d\n",(unsigned int)iphdr->ip_reserved_zero); fprintf(logfile," |-Dont Fragment Field : %d\n",(unsigned int)iphdr->ip_dont_fragment); fprintf(logfile," |-More Fragment Field : %d\n",(unsigned int)iphdr->ip_more_fragment); fprintf(logfile," |-TTL : %d\n",(unsigned int)iphdr->ip_ttl); fprintf(logfile," |-Protocol : %d\n",(unsigned int)iphdr->ip_protocol); fprintf(logfile," |-Checksum : %d\n",ntohs(iphdr->ip_checksum)); fprintf(logfile," |-Source IP : %s\n",inet_ntoa(source.sin_addr)); fprintf(logfile," |-Destination IP : %s\n",inet_ntoa(dest.sin_addr)); } void PrintUdpPacket(unsigned char *Buffer,int Size) { unsigned short iphdrlen; iphdr = (IPV4_HDR *)Buffer; iphdrlen = iphdr->ip_header_len*4; udpheader = (UDP_HDR *)(Buffer + iphdrlen); fprintf(logfile,"\n\n***********************UDP Packet*************************\n"); PrintIpHeader(Buffer,Size); fprintf(logfile,"\nUDP Header\n"); fprintf(logfile," |-Source Port : %d\n",ntohs(udpheader->source_port)); fprintf(logfile," |-Destination Port : %d\n",ntohs(udpheader->dest_port)); fprintf(logfile," |-UDP Length : %d\n",ntohs(udpheader->udp_length)); fprintf(logfile," |-UDP Checksum : %d\n",ntohs(udpheader->udp_checksum)); fprintf(logfile,"\n"); fprintf(logfile,"IP Header\n"); PrintData(Buffer,iphdrlen); fprintf(logfile,"UDP Header\n"); PrintData(Buffer+iphdrlen,sizeof(UDP_HDR)); fprintf(logfile,"Data Payload\n"); PrintData(Buffer+iphdrlen+sizeof(UDP_HDR) ,(Size - sizeof(UDP_HDR) - iphdr->ip_header_len*4)); fprintf(logfile,"\n###########################################################"); } void PrintData (unsigned char* data , int Size) { for(i=0 ; i < Size ; i++) { if( i!=0 && i%16==0) //if one line of hex printing is complete... { fprintf(logfile," "); for(j=i-16 ; j<i ; j++) { if(data[j]>=32 && data[j]<=128) fprintf(logfile,"%c",(unsigned char)data[j]); //if its a number or alphabet else fprintf(logfile,"."); //otherwise print a dot } fprintf(logfile,"\n"); } if(i%16==0) fprintf(logfile," "); fprintf(logfile," %02X",(unsigned int)data[i]); if( i==Size-1) //print the last spaces { for(j=0;j<15-i%16;j++) fprintf(logfile," "); //extra spaces fprintf(logfile," "); for(j=i-i%16 ; j<=i ; j++) { if(data[j]>=32 && data[j]<=128) fprintf(logfile,"%c",(unsigned char)data[j]); else fprintf(logfile,"."); } fprintf(logfile,"\n"); } } } following are the errors Error 1 error LNK2019: unresolved external symbol __imp__WSACleanup@0 referenced in function _main sniffer.obj sniffer test Error 2 error LNK2019: unresolved external symbol __imp__closesocket@4 referenced in function _main sniffer.obj sniffer test Error 3 error LNK2019: unresolved external symbol __imp__WSAIoctl@36 referenced in function _main sniffer.obj sniffer test Error 4 error LNK2019: unresolved external symbol __imp__bind@12 referenced in function _main sniffer.obj sniffer test Error 5 error LNK2019: unresolved external symbol __imp__inet_ntoa@4 referenced in function _main sniffer.obj sniffer test Error 6 error LNK2019: unresolved external symbol __imp__gethostbyname@4 referenced in function _main sniffer.obj sniffer test Error 7 error LNK2019: unresolved external symbol __imp__WSAGetLastError@0 referenced in function _main sniffer.obj sniffer test Error 8 error LNK2019: unresolved external symbol __imp__gethostname@8 referenced in function _main sniffer.obj sniffer test Error 9 error LNK2019: unresolved external symbol __imp__socket@12 referenced in function _main sniffer.obj sniffer test Error 10 error LNK2019: unresolved external symbol __imp__WSAStartup@8 referenced in function _main sniffer.obj sniffer test Error 11 error LNK2019: unresolved external symbol __imp__recvfrom@24 referenced in function "void __cdecl StartSniffing(unsigned int)" (?StartSniffing@@YAXI@Z) sniffer.obj sniffer test Error 12 error LNK2019: unresolved external symbol __imp__ntohs@4 referenced in function "void __cdecl PrintIpHeader(unsigned char *,int)" (?PrintIpHeader@@YAXPAEH@Z) sniffer.obj sniffer test Error 13 fatal error LNK1120: 12 unresolved externals E:\CWM\sniffer test\Debug\sniffer test.exe sniffer test

    Read the article

  • why am i getting error in this switch statement written in c

    - by mekasperasky
    I have a character array b which stores different identifiers in different iterations . I have to compare b with various identifiers of the programming language C and print it into a file . When i do it using the following switch statement it gives me errors b[i]='\0'; switch(b[i]) { case "if":fprintf(fp2,"if ----> IDENTIFIER \n"); case "then":fprintf(fp2,"then ----> IDENTIFIER \n"); case "else":fprintf(fp2,"else ----> IDENTIFIER \n"); case "switch":fprintf(fp2,"switch ----> IDENTIFIER \n"); case 'printf':fprintf(fp2,"prtintf ----> IDENTIFIER \n"); case 'scanf':fprintf(fp2,"else ----> IDENTIFIER \n"); case 'NULL':fprintf(fp2,"NULL ----> IDENTIFIER \n"); case 'int':fprintf(fp2,"INT ----> IDENTIFIER \n"); case 'char':fprintf(fp2,"char ----> IDENTIFIER \n"); case 'float':fprintf(fp2,"float ----> IDENTIFIER \n"); case 'long':fprintf(fp2,"long ----> IDENTIFIER \n"); case 'double':fprintf(fp2,"double ----> IDENTIFIER \n"); case 'char':fprintf(fp2,"char ----> IDENTIFIER \n"); case 'const':fprintf(fp2,"const ----> IDENTIFIER \n"); case 'continue':fprintf(fp2,"continue ----> IDENTIFIER \n"); case 'break':fprintf(fp2,"long ----> IDENTIFIER \n"); case 'for':fprintf(fp2,"long ----> IDENTIFIER \n"); case 'size of':fprintf(fp2,"size of ----> IDENTIFIER \n"); case 'register':fprintf(fp2,"register ----> IDENTIFIER \n"); case 'short':fprintf(fp2,"short ----> IDENTIFIER \n"); case 'auto':fprintf(fp2,"auto ----> IDENTIFIER \n"); case 'while':fprintf(fp2,"while ----> IDENTIFIER \n"); case 'do':fprintf(fp2,"do ----> IDENTIFIER \n"); case 'case':fprintf(fp2,"case ----> IDENTIFIER \n"); } the error being lex.c:94:13: warning: character constant too long for its type lex.c:95:13: warning: character constant too long for its type lex.c:96:13: warning: multi-character character constant lex.c:97:13: warning: multi-character character constant lex.c:98:13: warning: multi-character character constant lex.c:99:13: warning: character constant too long for its type lex.c:100:13: warning: multi-character character constant lex.c:101:13: warning: character constant too long for its type lex.c:102:13: warning: multi-character character constant lex.c:103:13: warning: character constant too long for its type lex.c:104:13: warning: character constant too long for its type lex.c:105:13: warning: character constant too long for its type lex.c:106:13: warning: multi-character character constant lex.c:107:13: warning: character constant too long for its type lex.c:108:13: warning: character constant too long for its type lex.c:109:13: warning: character constant too long for its type lex.c:110:12: warning: multi-character character constant lex.c:111:13: warning: character constant too long for its type lex.c:112:13: warning: multi-character character constant lex.c:113:13: warning: multi-character character constant lex.c: In function ‘int main()’: lex.c:90: error: case label does not reduce to an integer constant lex.c:91: error: case label does not reduce to an integer constant lex.c:92: error: case label does not reduce to an integer constant lex.c:93: error: case label does not reduce to an integer constant lex.c:94: warning: overflow in implicit constant conversion lex.c:95: warning: overflow in implicit constant conversion lex.c:95: error: duplicate case value lex.c:94: error: previously used here lex.c:96: warning: overflow in implicit constant conversion lex.c:97: warning: overflow in implicit constant conversion lex.c:98: warning: overflow in implicit constant conversion lex.c:99: warning: overflow in implicit constant conversion lex.c:99: error: duplicate case value lex.c:97: error: previously used here lex.c:100: warning: overflow in implicit constant conversion lex.c:101: warning: overflow in implicit constant conversion lex.c:102: warning: overflow in implicit constant conversion lex.c:102: error: duplicate case value lex.c:98: error: previously used here lex.c:103: warning: overflow in implicit constant conversion lex.c:103: error: duplicate case value lex.c:97: error: previously used here lex.c:104: warning: overflow in implicit constant conversion lex.c:104: error: duplicate case value lex.c:101: error: previously used here lex.c:105: warning: overflow in implicit constant conversion lex.c:106: warning: overflow in implicit constant conversion lex.c:106: error: duplicate case value lex.c:98: error: previously used here lex.c:107: warning: overflow in implicit constant conversion lex.c:107: error: duplicate case value lex.c:94: error: previously used here lex.c:108: warning: overflow in implicit constant conversion lex.c:108: error: duplicate case value lex.c:98: error: previously used here lex.c:109: warning: overflow in implicit constant conversion lex.c:109: error: duplicate case value lex.c:97: error: previously used here lex.c:110: warning: overflow in implicit constant conversion lex.c:111: warning: overflow in implicit constant conversion lex.c:111: error: duplicate case value lex.c:101: error: previously used here lex.c:112: warning: overflow in implicit constant conversion lex.c:112: error: duplicate case value lex.c:110: error: previously used here lex.c:113: warning: overflow in implicit constant conversion lex.c:113: error: duplicate case value lex.c:101: error: previously used here

    Read the article

  • Indentation (and wrap-indentation) of debug strings output by printf()/fprintf() in C program

    - by mbaitoff
    I'm using a debug output using printf() in my functions, but the output goes to the console starting at the 1st columns. I'd like to distinguish the nesting level of functions by indenting their output strings each time I dive into the function (it's implemented easily having a static int indentlevel; variable, which is incremented at the beginning of a function, used as a space-filler-count and decremented at the end). But the flaw is that once the output line becomes too long to be wrapped at the console edge, lines' wrapped parts start at column 1 of the console. Should I take care about this, since once the output is redirected to a file, lines are, say, one-line-length, and widths of the lines depend only on the text file viewer settings?

    Read the article

  • debug assertion fail

    - by Kolt
    I have a program that runs correctly if I start it manually. However, if I try to add a registry key to start it automatically during startup, I get this error: Debug assertion failed (str!=null) fprintf.c line:55 I tried to add Sleep(20000) before anything hapens, but same error. here`s the code: main() { FILE* filetowrite; filetowrite = fopen("textfile.txt", "a+"); writefunction(filetowrite); } int writefunction(FILE* filetowrite) { fprintf(filetowrite, "%s", "\n\n"); ... } I also tried with passing filename as char* and opening it in wrtiefunction(), but same error.

    Read the article

  • Why does fprintf start printing out of order or not at all?

    - by Steve Melvin
    This code should take an integer, create pipes, spawn two children, wait until they are dead, and start all over again. However, around the third time around the loop I lose my prompt to enter a number and it no longer prints the number I've entered. Any ideas? #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <errno.h> #define WRITE 1 #define READ 0 int main (int argc, const char * argv[]) { //Pipe file-descriptor array unsigned int isChildA = 0; int pipeA[2]; int pipeB[2]; int num = 0; while(1){ fprintf(stderr,"Enter an integer: "); scanf("%i", &num); if(num == 0){ fprintf(stderr,"You entered zero, exiting...\n"); exit(0); } //Open Pipes if(pipe(pipeA) < 0){ fprintf(stderr,"Could not create pipe A.\n"); exit(1); } if(pipe(pipeB) < 0){ fprintf(stderr,"Could not create pipe B.\n"); exit(1); } fprintf(stderr,"Value read: %i \n", num); fprintf(stderr,"Parent PID: %i\n", getpid()); pid_t procID = fork(); switch (procID) { case -1: fprintf(stderr,"Fork error, quitting...\n"); exit(1); break; case 0: isChildA = 1; break; default: procID = fork(); if (procID<0) { fprintf(stderr,"Fork error, quitting...\n"); exit(1); } else if(procID == 0){ isChildA = 0; } else { write(pipeA[WRITE], &num, sizeof(int)); close(pipeA[WRITE]); close(pipeA[READ]); close(pipeB[WRITE]); close(pipeB[READ]); pid_t pid; while (pid = waitpid(-1, NULL, 0)) { if (errno == ECHILD) { break; } } } break; } if (procID == 0) { //We're a child, do kid-stuff. ssize_t bytesRead = 0; int response; while (1) { while (bytesRead == 0) { bytesRead = read((isChildA?pipeA[READ]:pipeB[READ]), &response, sizeof(int)); } if (response < 2) { //Kill other child and self fprintf(stderr, "Terminating PROCID: %i\n", getpid()); write((isChildA?pipeB[WRITE]:pipeA[WRITE]), &response, sizeof(int)); close(pipeA[WRITE]); close(pipeA[READ]); close(pipeB[WRITE]); close(pipeB[READ]); return 0; } else if(!(response%2)){ //Even response/=2; fprintf(stderr,"PROCID: %i, VALUE: %i\n", getpid(), response); write((isChildA?pipeB[WRITE]:pipeA[WRITE]), &response, sizeof(int)); bytesRead = 0; } else { //Odd response*=3; response++; fprintf(stderr,"PROCID: %i, VALUE: %i\n", getpid(), response); write((isChildA?pipeB[WRITE]:pipeA[WRITE]), &response, sizeof(int)); bytesRead = 0; } } } } return 0; } This is the output I am getting... bash-3.00$ ./proj2 Enter an integer: 101 Value read: 101 Parent PID: 9379 PROCID: 9380, VALUE: 304 PROCID: 9381, VALUE: 152 PROCID: 9380, VALUE: 76 PROCID: 9381, VALUE: 38 PROCID: 9380, VALUE: 19 PROCID: 9381, VALUE: 58 PROCID: 9380, VALUE: 29 PROCID: 9381, VALUE: 88 PROCID: 9380, VALUE: 44 PROCID: 9381, VALUE: 22 PROCID: 9380, VALUE: 11 PROCID: 9381, VALUE: 34 PROCID: 9380, VALUE: 17 PROCID: 9381, VALUE: 52 PROCID: 9380, VALUE: 26 PROCID: 9381, VALUE: 13 PROCID: 9380, VALUE: 40 PROCID: 9381, VALUE: 20 PROCID: 9380, VALUE: 10 PROCID: 9381, VALUE: 5 PROCID: 9380, VALUE: 16 PROCID: 9381, VALUE: 8 PROCID: 9380, VALUE: 4 PROCID: 9381, VALUE: 2 PROCID: 9380, VALUE: 1 Terminating PROCID: 9381 Terminating PROCID: 9380 Enter an integer: 102 Value read: 102 Parent PID: 9379 PROCID: 9386, VALUE: 51 PROCID: 9387, VALUE: 154 PROCID: 9386, VALUE: 77 PROCID: 9387, VALUE: 232 PROCID: 9386, VALUE: 116 PROCID: 9387, VALUE: 58 PROCID: 9386, VALUE: 29 PROCID: 9387, VALUE: 88 PROCID: 9386, VALUE: 44 PROCID: 9387, VALUE: 22 PROCID: 9386, VALUE: 11 PROCID: 9387, VALUE: 34 PROCID: 9386, VALUE: 17 PROCID: 9387, VALUE: 52 PROCID: 9386, VALUE: 26 PROCID: 9387, VALUE: 13 PROCID: 9386, VALUE: 40 PROCID: 9387, VALUE: 20 PROCID: 9386, VALUE: 10 PROCID: 9387, VALUE: 5 PROCID: 9386, VALUE: 16 PROCID: 9387, VALUE: 8 PROCID: 9386, VALUE: 4 PROCID: 9387, VALUE: 2 PROCID: 9386, VALUE: 1 Terminating PROCID: 9387 Terminating PROCID: 9386 Enter an integer: 104 Value read: 104 Parent PID: 9379 Enter an integer: PROCID: 9388, VALUE: 52 PROCID: 9389, VALUE: 26 PROCID: 9388, VALUE: 13 PROCID: 9389, VALUE: 40 PROCID: 9388, VALUE: 20 PROCID: 9389, VALUE: 10 PROCID: 9388, VALUE: 5 PROCID: 9389, VALUE: 16 PROCID: 9388, VALUE: 8 PROCID: 9389, VALUE: 4 PROCID: 9388, VALUE: 2 PROCID: 9389, VALUE: 1 Terminating PROCID: 9388 Terminating PROCID: 9389 105 Value read: 105 Parent PID: 9379 Enter an integer: PROCID: 9395, VALUE: 316 PROCID: 9396, VALUE: 158 PROCID: 9395, VALUE: 79 PROCID: 9396, VALUE: 238 PROCID: 9395, VALUE: 119 PROCID: 9396, VALUE: 358 PROCID: 9395, VALUE: 179 PROCID: 9396, VALUE: 538 PROCID: 9395, VALUE: 269 PROCID: 9396, VALUE: 808 PROCID: 9395, VALUE: 404 PROCID: 9396, VALUE: 202 PROCID: 9395, VALUE: 101 PROCID: 9396, VALUE: 304 PROCID: 9395, VALUE: 152 PROCID: 9396, VALUE: 76 PROCID: 9395, VALUE: 38 PROCID: 9396, VALUE: 19 PROCID: 9395, VALUE: 58 PROCID: 9396, VALUE: 29 PROCID: 9395, VALUE: 88 PROCID: 9396, VALUE: 44 PROCID: 9395, VALUE: 22 PROCID: 9396, VALUE: 11 PROCID: 9395, VALUE: 34 PROCID: 9396, VALUE: 17 PROCID: 9395, VALUE: 52 PROCID: 9396, VALUE: 26 PROCID: 9395, VALUE: 13 PROCID: 9396, VALUE: 40 PROCID: 9395, VALUE: 20 PROCID: 9396, VALUE: 10 PROCID: 9395, VALUE: 5 PROCID: 9396, VALUE: 16 PROCID: 9395, VALUE: 8 PROCID: 9396, VALUE: 4 PROCID: 9395, VALUE: 2 PROCID: 9396, VALUE: 1 Terminating PROCID: 9395 Terminating PROCID: 9396 105 Value read: 105 Parent PID: 9379 Enter an integer: PROCID: 9397, VALUE: 316 PROCID: 9398, VALUE: 158 PROCID: 9397, VALUE: 79 PROCID: 9398, VALUE: 238 PROCID: 9397, VALUE: 119 PROCID: 9398, VALUE: 358 PROCID: 9397, VALUE: 179 PROCID: 9398, VALUE: 538 PROCID: 9397, VALUE: 269 PROCID: 9398, VALUE: 808 PROCID: 9397, VALUE: 404 PROCID: 9398, VALUE: 202 PROCID: 9397, VALUE: 101 PROCID: 9398, VALUE: 304 PROCID: 9397, VALUE: 152 PROCID: 9398, VALUE: 76 PROCID: 9397, VALUE: 38 PROCID: 9398, VALUE: 19 PROCID: 9397, VALUE: 58 PROCID: 9398, VALUE: 29 PROCID: 9397, VALUE: 88 PROCID: 9398, VALUE: 44 PROCID: 9397, VALUE: 22 PROCID: 9398, VALUE: 11 PROCID: 9397, VALUE: 34 PROCID: 9398, VALUE: 17 PROCID: 9397, VALUE: 52 PROCID: 9398, VALUE: 26 PROCID: 9397, VALUE: 13 PROCID: 9398, VALUE: 40 PROCID: 9397, VALUE: 20 PROCID: 9398, VALUE: 10 PROCID: 9397, VALUE: 5 PROCID: 9398, VALUE: 16 PROCID: 9397, VALUE: 8 PROCID: 9398, VALUE: 4 PROCID: 9397, VALUE: 2 PROCID: 9398, VALUE: 1 Terminating PROCID: 9397 Terminating PROCID: 9398 106 Value read: 106 Parent PID: 9379 Enter an integer: PROCID: 9399, VALUE: 53 PROCID: 9400, VALUE: 160 PROCID: 9399, VALUE: 80 PROCID: 9400, VALUE: 40 PROCID: 9399, VALUE: 20 PROCID: 9400, VALUE: 10 PROCID: 9399, VALUE: 5 PROCID: 9400, VALUE: 16 PROCID: 9399, VALUE: 8 PROCID: 9400, VALUE: 4 PROCID: 9399, VALUE: 2 PROCID: 9400, VALUE: 1 Terminating PROCID: 9399 Terminating PROCID: 9400 ^C Another thing that's strange, when ran from within XCode it behaves normally. However, when ran from bash on Solaris or OSX it acts up.

    Read the article

  • 11415 compile errors FTW?!

    - by Koning Baard
    Hello. This is something I've really never seen but, I downloaded the source code of the sine wave example at http://www.audiosynth.com/sinewavedemo.html . It is in an old Project Builder Project format, and I want to compile it with Xcode (GCC). However, Xcode gives me 11415 compile errors. The first few are (all in the precompilation of AppKit.h): /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:31:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:31: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:33:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:33: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:35:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:35: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:36:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:36: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:37:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:37: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:38:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:38: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:40:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:40: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:42:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:42: error: expected identifier or '(' before '@' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:48:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:48: error: expected identifier or '(' before '@' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:54:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:54: error: expected identifier or '(' before '@' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:59:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:59: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:61:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:61: error: expected identifier or '(' before '@' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:69:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:69: error: expected identifier or '(' before '+' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:71:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:71: error: expected identifier or '(' before '+' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:39:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:39: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:40:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:40: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:41:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:41: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:42:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:42: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:43:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:43: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:44:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:44: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:45:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:45: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:46:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:46: error: expected identifier or '(' before '-' token Some of the code is: HAL.c /* * HAL.c * Sinewave * * Created by james on Fri Apr 27 2001. * Copyright (c) 2001 __CompanyName__. All rights reserved. * */ #include "HAL.h" #include "math.h" appGlobals gAppGlobals; OSStatus appIOProc (AudioDeviceID inDevice, const AudioTimeStamp* inNow, const AudioBufferList* inInputData, const AudioTimeStamp* inInputTime, AudioBufferList* outOutputData, const AudioTimeStamp* inOutputTime, void* device); #define FailIf(cond, handler) \ if (cond) { \ goto handler; \ } #define FailWithAction(cond, action, handler) \ if (cond) { \ { action; } \ goto handler; \ } // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // HAL Sample Code ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //#define noErr 0 //#define false 0 OSStatus SetupHAL (appGlobalsPtr globals) { OSStatus err = noErr; UInt32 count, bufferSize; AudioDeviceID device = kAudioDeviceUnknown; AudioStreamBasicDescription format; // get the default output device for the HAL count = sizeof(globals->device); // it is required to pass the size of the data to be returned err = AudioHardwareGetProperty(kAudioHardwarePropertyDefaultOutputDevice, &count, (void *) &device); fprintf(stderr, "kAudioHardwarePropertyDefaultOutputDevice %d\n", err); if (err != noErr) goto Bail; // get the buffersize that the default device uses for IO count = sizeof(globals->deviceBufferSize); // it is required to pass the size of the data to be returned err = AudioDeviceGetProperty(device, 0, false, kAudioDevicePropertyBufferSize, &count, &bufferSize); fprintf(stderr, "kAudioDevicePropertyBufferSize %d %d\n", err, bufferSize); if (err != noErr) goto Bail; // get a description of the data format used by the default device count = sizeof(globals->deviceFormat); // it is required to pass the size of the data to be returned err = AudioDeviceGetProperty(device, 0, false, kAudioDevicePropertyStreamFormat, &count, &format); fprintf(stderr, "kAudioDevicePropertyStreamFormat %d\n", err); fprintf(stderr, "sampleRate %g\n", format.mSampleRate); fprintf(stderr, "mFormatFlags %08X\n", format.mFormatFlags); fprintf(stderr, "mBytesPerPacket %d\n", format.mBytesPerPacket); fprintf(stderr, "mFramesPerPacket %d\n", format.mFramesPerPacket); fprintf(stderr, "mChannelsPerFrame %d\n", format.mChannelsPerFrame); fprintf(stderr, "mBytesPerFrame %d\n", format.mBytesPerFrame); fprintf(stderr, "mBitsPerChannel %d\n", format.mBitsPerChannel); if (err != kAudioHardwareNoError) goto Bail; FailWithAction(format.mFormatID != kAudioFormatLinearPCM, err = paramErr, Bail); // bail if the format is not linear pcm // everything is ok so fill in these globals globals->device = device; globals->deviceBufferSize = bufferSize; globals->deviceFormat = format; Bail: return (err); } /* struct AudioStreamBasicDescription { Float64 mSampleRate; // the native sample rate of the audio stream UInt32 mFormatID; // the specific encoding type of audio stream UInt32 mFormatFlags; // flags specific to each format UInt32 mBytesPerPacket; // the number of bytes in a packet UInt32 mFramesPerPacket; // the number of frames in each packet UInt32 mBytesPerFrame; // the number of bytes in a frame UInt32 mChannelsPerFrame; // the number of channels in each frame UInt32 mBitsPerChannel; // the number of bits in each channel }; typedef struct AudioStreamBasicDescription AudioStreamBasicDescription; */ // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // This is a simple playThru ioProc. It simply places the data in the input buffer back into the output buffer. // Watch out for feedback from Speakers to Microphone OSStatus appIOProc (AudioDeviceID inDevice, const AudioTimeStamp* inNow, const AudioBufferList* inInputData, const AudioTimeStamp* inInputTime, AudioBufferList* outOutputData, const AudioTimeStamp* inOutputTime, void* appGlobals) { appGlobalsPtr globals = appGlobals; int i; double phase = gAppGlobals.phase; double amp = gAppGlobals.amp; double pan = gAppGlobals.pan; double freq = gAppGlobals.freq * 2. * 3.14159265359 / globals->deviceFormat.mSampleRate; int numSamples = globals->deviceBufferSize / globals->deviceFormat.mBytesPerFrame; // assume floats for now.... float *out = outOutputData->mBuffers[0].mData; for (i=0; i<numSamples; ++i) { float wave = sin(phase) * amp; phase = phase + freq; *out++ = wave * (1.0-pan); *out++ = wave * pan; } gAppGlobals.phase = phase; return (kAudioHardwareNoError); } // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ OSStatus StartPlayingThruHAL(appGlobalsPtr globals) { OSStatus err = kAudioHardwareNoError; if (globals->soundPlaying) return 0; globals->phase = 0.0; err = AudioDeviceAddIOProc(globals->device, appIOProc, (void *) globals); // setup our device with an IO proc if (err != kAudioHardwareNoError) goto Bail; err = AudioDeviceStart(globals->device, appIOProc); // start playing sound through the device if (err != kAudioHardwareNoError) goto Bail; globals->soundPlaying = true; // set the playing status global to true Bail: return (err); } // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ OSStatus StopPlayingThruHAL(appGlobalsPtr globals) { OSStatus err = kAudioHardwareNoError; if (!globals->soundPlaying) return 0; err = AudioDeviceStop(globals->device, appIOProc); // stop playing sound through the device if (err != kAudioHardwareNoError) goto Bail; err = AudioDeviceRemoveIOProc(globals->device, appIOProc); // remove the IO proc from the device if (err != kAudioHardwareNoError) goto Bail; globals->soundPlaying = false; // set the playing status global to false Bail: return (err); } Sinewave.m // // a very simple Cocoa CoreAudio app // by James McCartney [email protected] www.audiosynth.com // // Sinewave - this class implements a sine oscillator with dezippered control of frequency, pan and amplitude // #import "Sinewave.h" // define a C struct from the Obj-C object so audio callback can access data typedef struct { @defs(Sinewave); } sinewavedef; // this is the audio processing callback. OSStatus appIOProc (AudioDeviceID inDevice, const AudioTimeStamp* inNow, const AudioBufferList* inInputData, const AudioTimeStamp* inInputTime, AudioBufferList* outOutputData, const AudioTimeStamp* inOutputTime, void* defptr) { sinewavedef* def = defptr; // get access to Sinewave's data int i; // load instance vars into registers double phase = def->phase; double amp = def->amp; double pan = def->pan; double freq = def->freq; double ampz = def->ampz; double panz = def->panz; double freqz = def->freqz; int numSamples = def->deviceBufferSize / def->deviceFormat.mBytesPerFrame; // assume floats for now.... float *out = outOutputData->mBuffers[0].mData; for (i=0; i<numSamples; ++i) { float wave = sin(phase) * ampz; // generate sine wave phase = phase + freqz; // increment phase // write output *out++ = wave * (1.0-panz); // left channel *out++ = wave * panz; // right channel // de-zipper controls panz = 0.001 * pan + 0.999 * panz; ampz = 0.001 * amp + 0.999 * ampz; freqz = 0.001 * freq + 0.999 * freqz; } // save registers back to object def->phase = phase; def->freqz = freqz; def->ampz = ampz; def->panz = panz; return kAudioHardwareNoError; } @implementation Sinewave - (void) setup { OSStatus err = kAudioHardwareNoError; UInt32 count; device = kAudioDeviceUnknown; initialized = NO; // get the default output device for the HAL count = sizeof(device); // it is required to pass the size of the data to be returned err = AudioHardwareGetProperty(kAudioHardwarePropertyDefaultOutputDevice, &count, (void *) &device); if (err != kAudioHardwareNoError) { fprintf(stderr, "get kAudioHardwarePropertyDefaultOutputDevice error %ld\n", err); return; } // get the buffersize that the default device uses for IO count = sizeof(deviceBufferSize); // it is required to pass the size of the data to be returned err = AudioDeviceGetProperty(device, 0, false, kAudioDevicePropertyBufferSize, &count, &deviceBufferSize); if (err != kAudioHardwareNoError) { fprintf(stderr, "get kAudioDevicePropertyBufferSize error %ld\n", err); return; } fprintf(stderr, "deviceBufferSize = %ld\n", deviceBufferSize); // get a description of the data format used by the default device count = sizeof(deviceFormat); // it is required to pass the size of the data to be returned err = AudioDeviceGetProperty(device, 0, false, kAudioDevicePropertyStreamFormat, &count, &deviceFormat); if (err != kAudioHardwareNoError) { fprintf(stderr, "get kAudioDevicePropertyStreamFormat error %ld\n", err); return; } if (deviceFormat.mFormatID != kAudioFormatLinearPCM) { fprintf(stderr, "mFormatID != kAudioFormatLinearPCM\n"); return; } if (!(deviceFormat.mFormatFlags & kLinearPCMFormatFlagIsFloat)) { fprintf(stderr, "Sorry, currently only works with float format....\n"); return; } initialized = YES; fprintf(stderr, "mSampleRate = %g\n", deviceFormat.mSampleRate); fprintf(stderr, "mFormatFlags = %08lX\n", deviceFormat.mFormatFlags); fprintf(stderr, "mBytesPerPacket = %ld\n", deviceFormat.mBytesPerPacket); fprintf(stderr, "mFramesPerPacket = %ld\n", deviceFormat.mFramesPerPacket); fprintf(stderr, "mChannelsPerFrame = %ld\n", deviceFormat.mChannelsPerFrame); fprintf(stderr, "mBytesPerFrame = %ld\n", deviceFormat.mBytesPerFrame); fprintf(stderr, "mBitsPerChannel = %ld\n", deviceFormat.mBitsPerChannel); } - (void)setAmpVal:(double)val { amp = val; } - (void)setFreqVal:(double)val { freq = val * 2. * 3.14159265359 / deviceFormat.mSampleRate; } - (void)setPanVal:(double)val { pan = val; } - (BOOL)start { OSStatus err = kAudioHardwareNoError; sinewavedef *def; if (!initialized) return false; if (soundPlaying) return false; // initialize phase and de-zipper filters. phase = 0.0; freqz = freq; ampz = amp; panz = pan; def = (sinewavedef *)self; err = AudioDeviceAddIOProc(device, appIOProc, (void *) def); // setup our device with an IO proc if (err != kAudioHardwareNoError) return false; err = AudioDeviceStart(device, appIOProc); // start playing sound through the device if (err != kAudioHardwareNoError) return false; soundPlaying = true; // set the playing status global to true return true; } - (BOOL)stop { OSStatus err = kAudioHardwareNoError; if (!initialized) return false; if (!soundPlaying) return false; err = AudioDeviceStop(device, appIOProc); // stop playing sound through the device if (err != kAudioHardwareNoError) return false; err = AudioDeviceRemoveIOProc(device, appIOProc); // remove the IO proc from the device if (err != kAudioHardwareNoError) return false; soundPlaying = false; // set the playing status global to false return true; } @end Can anyone help me compiling this example? I'd really appriciate it. Thanks

    Read the article

  • error in finding out the lexems and no of lines of a text file in C

    - by mekasperasky
    #include<stdio.h> #include<ctype.h> #include<string.h> int main() { int i=0,j,k,lines_count[2]={1,1},operand_count[2]={0},operator_count[2]={0},uoperator_count[2]={0},control_count[2]={0,0},cl[13]={0},variable_dec[2]={0,0},l,p[2]={0},ct,variable_used[2]={0,0},constant_count[2],s[2]={0},t[2]={0}; char a,b[100],c[100]; char d[100]={0}; j=30; FILE *fp1[2],*fp2; fp1[0]=fopen("program1.txt","r"); fp1[1]=fopen("program2.txt","r"); //the source file is opened in read only mode which will passed through the lexer fp2=fopen("ccv1ouput.txt","wb"); //now lets remove all the white spaces and store the rest of the words in a file if(fp1[0]==NULL) { perror("failed to open program1.txt"); //return EXIT_FAILURE; } if(fp1[1]==NULL) { perror("failed to open program2.txt"); //return EXIT_FAILURE; } i=0; k=0; ct=0; while(ct!=2) { while(!feof(fp1[ct])) { a=fgetc(fp1[ct]); if(a!=' '&&a!='\n') { if (!isalpha(a) && !isdigit(a)) { switch(a) { case '+':{ i=0; cl[0]=1; operator_count[ct]=operator_count[ct]+1;break;} case '-':{ cl[1]=1; operator_count[ct]=operator_count[ct]+1;i=0;break;} case '*':{ cl[2]=1; operator_count[ct]=operator_count[ct]+1;i=0;break;} case '/':{ cl[3]=1; operator_count[ct]=operator_count[ct]+1;i=0;break;} case '=':{a=fgetc(fp1[ct]); if (a=='='){cl[4]=1; operator_count[ct]=operator_count[ct]+1; operand_count[ct]=operand_count[ct]+1;} else { cl[5]=1; operator_count[ct]=operator_count[ct]+1; operand_count[ct]=operand_count[ct]+1; ungetc(1,fp1[ct]); } break;} case '%':{ cl[6]=1; operator_count[ct]=operator_count[ct]+1;i=0;break;} case '<':{ a=fgetc(fp1[ct]); if (a=='=') {cl[7]=1; operator_count[ct]=operator_count[ct]+1;} else { cl[8]=1; operator_count[ct]=operator_count[ct]+1; ungetc(1,fp1[ct]); } break; } case '>':{ ; a=fgetc(fp1[ct]); if (a=='='){cl[9]=1; operator_count[ct]=operator_count[ct]+1;} else { cl[10]=1; operator_count[ct]=operator_count[ct]+1; ungetc(1,fp1[ct]); } break;} case '&':{ cl[11]=1; a=fgetc(fp1[ct]); operator_count[ct]=operator_count[ct]+1; operand_count[ct]=operand_count[ct]+1; variable_used[ct]=variable_used[ct]-1; break; } case '|':{ cl[12]=1; a=fgetc(fp1[ct]); operator_count[ct]=operator_count[ct]+1; operand_count[ct]=operand_count[ct]+1; variable_used[ct]=variable_used[ct]-1; break; } case '#':{ while(a!='\n') { a=fgetc(fp1[ct]); } } } } else { d[i]=a; i=i+1; k=k+1; } } else { //printf("%s \n",d); if((strcmp(d,"if")==0)){ memset ( d, 0, 100 ); i=0; control_count[ct]=control_count[ct]+1; } else if(strcmp(d,"then")==0){ i=0;memset ( d, 0, 100 );control_count[ct]=control_count[ct]+1;} else if(strcmp(d,"else")==0){ i=0;memset ( d, 0, 100 );control_count[ct]=control_count[ct]+1;} else if(strcmp(d,"while")==0){ i=0;memset ( d, 0, 100 );control_count[ct]=control_count[ct]+1;} else if(strcmp(d,"int")==0){ while(a != '\n') { a=fgetc(fp1[ct]); if (isalpha(a) ) variable_dec[ct]=variable_dec[ct]+1; } memset ( d, 0, 100 ); lines_count[ct]=lines_count[ct]+1; } else if(strcmp(d,"char")==0){while(a != '\n') { a=fgetc(fp1[ct]); if (isalpha(a) ) variable_dec[ct]=variable_dec[ct]+1; } memset ( d, 0, 100 ); lines_count[ct]=lines_count[ct]+1; } else if(strcmp(d,"float")==0){while(a != '\n') { a=fgetc(fp1[ct]); if (isalpha(a) ) variable_dec[ct]=variable_dec[ct]+1; } memset ( d, 0, 100 ); lines_count[ct]=lines_count[ct]+1; } else if(strcmp(d,"printf")==0){while(a!='\n') a=fgetc(fp1[ct]); memset(d,0,100); } else if(strcmp(d,"scanf")==0){while(a!='\n') a=fgetc(fp1[ct]); memset(d,0,100);} else if (isdigit(d[i-1])) { memset ( d, 0, 100 ); i=0; constant_count[ct]=constant_count[ct]+1; operand_count[ct]=operand_count[ct]+1; } else if (isalpha(d[i-1]) && strcmp(d,"int")!=0 && strcmp(d,"char")!=0 && strcmp(d,"float")!=0 && (strcmp(d,"if")!=0) && strcmp(d,"then")!=0 && strcmp(d,"else")!=0 && strcmp(d,"while")!=0 && strcmp(d,"printf")!=0 && strcmp(d,"scanf")!=0) { memset ( d, 0, 100 ); i=0; operand_count[ct]=operand_count[ct]+1; } else if(a=='\n') { lines_count[ct]=lines_count[ct]+1; memset ( d, 0, 100 ); } } } fclose(fp1[ct]); operand_count[ct]=operand_count[ct]-5; variable_used[0]=operand_count[0]-constant_count[0]; variable_used[1]=operand_count[1]-constant_count[1]; for(j=0;j<12;j++) uoperator_count[ct]=uoperator_count[ct]+cl[j]; fprintf(fp2,"\n statistics of program %d",ct+1); fprintf(fp2,"\n the no of lines ---> %d",lines_count[ct]); fprintf(fp2,"\n the no of operands --->%d",operand_count[ct]); fprintf(fp2,"\n the no of operator --->%d",operator_count[ct]); fprintf(fp2,"\n the no of control statments --->%d",control_count[ct]); fprintf(fp2,"\n the no of unique operators --->%d",uoperator_count[ct]); fprintf(fp2,"\n the no of variables declared--->%d",variable_dec[ct]); fprintf(fp2,"\n the no of variables used--->%d",variable_used[ct]); fprintf(fp2,"\n ---------------------------------"); fprintf(fp2,"\n \t \t \t"); ct=ct+1; } t[0]=lines_count[0]+control_count[0]+uoperator_count[0]; t[1]=lines_count[1]+control_count[1]+uoperator_count[1]; s[0]=operator_count[0]+operand_count[0]+variable_dec[0]+variable_used[0]; s[1]=operator_count[1]+operand_count[1]+variable_dec[1]+variable_used[1]; fprintf(fp2,"\n the time complexity of program 1 is %d",t[0]); fprintf(fp2,"\n the time complexity of program 2 is %d",t[1]); fprintf(fp2,"\n the space complexity of program 1 is %d",s[0]); fprintf(fp2,"\n the space complexity of program 2 is %d",s[1]); if((t[0]>t[1]) && (s[0] >s[1])) fprintf(fp2,"\n the efficiency of program 2 is greater than program 1"); else if(t[0]<t[1] && s[0] < s[1]) fprintf(fp2,"\n the efficiency of program 1 is greater than program 2 " ); else if (t[0]+s[0] > t[1]+s[1]) fprintf(fp2,"\n the efficiency of program 1 is greater than program 2"); else if (t[0]+s[0] < t[1]+s[1]) fprintf(fp2,"\n the efficiency of program 2 is greater than program 1"); else if (t[0]+s[0] == t[1]+s[1]) fprintf(fp2,"\n the efficiency of program 1 is equal to that of program 2"); fclose(fp2); return 0; } this code basically compares two c codes and finds out the no. of variables declared , used , no. of control statements , no. of lines and no. of unique operators , and operands , so as to find out the time complexity and space complexity of of the two programs given in the text file program1.txt and program2.txt ... Lets say program1.txt is this #include<stdio.h> #include<math.h> int main () { FILE *fp; fp=fopen("output.txt","w"); long double t,y=0,x=0,e=5,f=1,w=1; for (t=0;t<10;t=t+0.01) { //if (isnan(y) || isinf(y)) //break; fprintf(fp,"%ld\t%ld\n",y,x); y = y + ((e*(1 - (x*x))*y) - x + f*cos(w*0.1))*0.1; x = x + y*0.1; } fclose(fp); return (0); } i havent indented it as its just a text file . But my output is totally faulty . Its not able to find the any of the ouput that i need . Where is the bug in this ? I am not able to figure out as the algorithm looks fine .

    Read the article

  • Why my shell program wont open the file got as argument in function "cat"

    - by anna karenina
    I included the code below, sorry to bother you with so much code. Argument parsing is ok, i checked it out with watches. I've put some printfs to check out where the problem may be and it seems that it wont open the file cat receives as argument. i called from shell like "cat -b file" #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #define TRUE 0 #define FALSE 1 void yes(int argc, char *argv[]); int cat(int argc, char *argv[]); //#include "cat.h" //#include "yes.h" //#include"tee.h" char buf[50],c[10], *p2,*p, *pch; int count; char *matrix[20]; void yes(int argc, char *argv[]) { int i; // if (argc >= 2 && *argv[1] == '-') // { //printf("ERROR!"); //} //if (argc == 1) // { while (1) if (puts("y") == EOF) { perror("yes"); exit(FALSE); } // } while (1) for (i = 1; i < argc; i++) if (fputs(argv[i], stdout) == EOF || putchar(i == argc - 1 ? '\n' : ' ') == EOF) { perror("yes"); exit(FALSE); } //exit(TRUE); } int main(int argc, char *argv[]) { //p=(char *)malloc(sizeof(char)*50); do { fprintf (stderr, "$ "); fgets (buf,50,stdin); p=buf; fprintf (stderr, "Comanda primita de la tastatura: "); fputs (buf, stderr); int i=0,j=0; //strcpy(p,buf); strcpy(c,"\0"); while (buf[i] == ' ') { i++; p++; } if (buf[i] == '#') fprintf (stderr, "Nici o comanda, ci e un comentariu!\n"); else { j=0; while (buf[i] != ' ' && buf[i] != '\n') { i++; j++; } strncpy (c,p,j); fprintf (stderr, "%s\n",c); if (strcmp (c,"yes") == 0) { p2 = p+j+1; pch = strtok (p2," "); count = 0; while (pch != NULL) { //printf ("%s\n",pch); matrix[count] = strdup(pch); pch = strtok (NULL, " "); count++; } yes(count, matrix); fprintf (stderr, "Aici se va executa comanda yes\n"); } else if (strcmp (c,"cat") == 0) { p2 = p+j+1; pch = strtok (p2," "); count = 0; while (pch != NULL) { //printf ("%s\n",pch); matrix[count] = strdup(pch); pch = strtok (NULL, " "); count++; } cat(count,matrix); fprintf (stderr, "Aici se va executa comanda cat \n"); } else if (strcmp (c,"tee") == 0) { //tee(); fprintf(stderr, "Aici se va executa comanda tee\n"); } fprintf (stderr, "Aici se va executa comanda basename\n"); strcpy(buf,"\0"); } } while (strcmp(c, "exit") != 0); fprintf (stderr, "Terminat corect!\n"); return 0; } int cat(int argc, char *argv[]) { int c ; opterr = 0 ; optind = 0 ; char number = 0; char squeeze = 0; char marker = 0; fprintf(stderr,"SALUT< SUNT IN FUNCTIZE>\n"); while ((c = getopt (argc, argv, "bnsE")) != -1) switch (c) { case 'b' : number = 1; break; case 'n' : number = 2; break; case 'm' : marker = 1; break; case 's' : squeeze = 1; break; case 'E' : marker = 1; break; } if (optind + 1 != argc) { fprintf (stderr, "\tWrong arguments!\n") ; return -1 ; } FILE * fd = fopen (argv[optind], "r"); printf("am deschis fisierul %s ",argv[optind]); if (fd == NULL) { printf("FISIER NULL asdasdasdasdasd"); return 1; } char line[1025]; int line_count = 1; while (!feof(fd)) { fgets(line, 1025, fd); printf("sunt in while :> %s",line); int len = strlen(line); if (line[len - 1] == '\n') { if(len - 2 >= 0) { if(line[len - 2] == '\r') { line[len - 2] = '\0'; len -= 2; } else { line[len - 1] = '\0'; len -= 1; } } else { line[len - 1] = '\0'; len -= 1; } } if (squeeze == 1 && len == 0) continue; if (number == 1) { fprintf (stdout, "%4d ", line_count); line_count++; } else if (number == 2) { if (len > 0) { fprintf (stdout, "%4d ", line_count); line_count++; } else fprintf (stdout, " "); } fprintf(stdout, "%s", line); if (marker == 1) fprintf(stdout, "$"); fprintf(stdout, "\n"); } fclose (fd); return 0 ; }

    Read the article

  • Regular exp to validate email in C

    - by Liju Mathew
    Hi, We need to write a email validation program in C. We are planning to use GNU Cregex.h) regular expression. The regular expression we prepared is [a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*@(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9])? But the below code is failing while compiling the regex. #include <stdio.h> #include <regex.h> int main(const char *argv, int argc) { const char *reg_exp = "[a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*@(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9])?"; int status = 1; char email[71]; regex_t preg; int rc; printf("The regex = %s\n", reg_exp); rc = regcomp(&preg, reg_exp, REG_EXTENDED|REG_NOSUB); if (rc != 0) { if (rc == REG_BADPAT || rc == REG_ECOLLATE) fprintf(stderr, "Bad Regex/Collate\n"); if (rc == REG_ECTYPE) fprintf(stderr, "Invalid Char\n"); if (rc == REG_EESCAPE) fprintf(stderr, "Trailing \\\n"); if (rc == REG_ESUBREG || rc == REG_EBRACK) fprintf(stderr, "Invalid number/[] error\n"); if (rc == REG_EPAREN || rc == REG_EBRACE) fprintf(stderr, "Paren/Bracket error\n"); if (rc == REG_BADBR || rc == REG_ERANGE) fprintf(stderr, "{} content invalid/Invalid endpoint\n"); if (rc == REG_ESPACE) fprintf(stderr, "Memory error\n"); if (rc == REG_BADRPT) fprintf(stderr, "Invalid regex\n"); fprintf(stderr, "%s: Failed to compile the regular expression:%d\n", __func__, rc); return 1; } while (status) { fgets(email, sizeof(email), stdin); status = email[0]-48; rc = regexec(&preg, email, (size_t)0, NULL, 0); if (rc == 0) { fprintf(stderr, "%s: The regular expression is a match\n", __func__); } else { fprintf(stderr, "%s: The regular expression is not a match: %d\n", __func__, rc); } } regfree(&preg); return 0; } The regex compilation is failing with the below error. The regex = [a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*@(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9])? Invalid regex main: Failed to compile the regular expression:13 What is the cause of this error? Whether the regex need to be modified? Thanks, Mathew Liju

    Read the article

  • how to do bar chart in c

    - by user292489
    i have written a program that prints out the integers in the same order as the input with 5 numbers per line. That is, the first 5 integers will be printed in the first line; the next 5 integers in the next line; and so on. and also i was trying to print out the numbers in a bar chart formatt:like 81-105 ( 1) x 56-80 ( 5) xxxxx 6-11(5) xxxxx -1-5 (3) xxx my program: cntr=0; while (fscanf(in, "%d", &a[i]) != EOF) {i++; fprintf(out, "%d-%d (%d) %s\n", A, B, k, x, cntr); fprintf(out, "%d\n", k, cntr); fprintf(out, "x", a[i]); i++; } fprintf(out, "1864-2336 (%d)%s\n", k, x); fprintf(out, "1391-1863 (%d)%s\n", k, x); fprintf(out, "918-1390 (%d)%s\n", k, x); fprintf(out, "445-917 (%d)%s\n", k, x); fprintf(out,"-28-444 (%d)%s\n", k, x); fclose(in); fclose(out); return 0; } enter code here

    Read the article

  • How to debug anomalous C memory/stack problems

    - by EBM
    Hello, Sorry I can't be specific with code, but the problems I am seeing are anomalous. Character string values seem to be getting changed depending on other, unrelated code. For example, the value of the argument that is passed around below will change merely depending on if I comment out one or two of the fprintf() calls! By the last fprintf() the value is typically completely empty (and no, I have checked to make sure I am not modifying the argument directly... all I have to do is comment out a fprintf() or add another fprintf() and the value of the string will change at certain points!): static process_args(char *arg) { /* debug */ fprintf(stderr, "Function arg is %s\n", arg); ...do a bunch of stuff including call another function that uses alloc()... /* debug */ fprintf(stderr, "Function arg is now %s\n", arg); } int main(int argc, char *argv[]) { char *my_arg; ... do a bunch of stuff ... /* just to show you it's nothing to do with the argv array */ my_string = strdup(argv[1]); /* debug */ fprintf(stderr, "Argument 1 is %s\n", my_string); process_args(my_string); } There's more code all around, so I can't ask for someone to debug my program -- what I want to know is HOW can I debug why character strings like this are getting their memory changed or overwritten based on unrelated code. Is my memory limited? My stack too small? How do I tell? What else can I do to track down the issue? My program isn't huge, it's like a thousand lines of code give or take and a couple dynamically linked external libs, but nothing out of the ordinary. HELP! TIA!

    Read the article

  • Prob comparing pointers and integer in C

    - by Dimitri
    Hi I have a problem with this code. When i am using this function I have no warnings. : void handler(int sig){ switch(sig) { case SIGINT : { click++; fprintf(stdout,"SIGINT recu\n"); if( click == N){ exit(0); } } case SIGALRM : fprintf(stdout,"SIGALRM received\n"); exit(0); case SIGTERM: fprintf(stdout,"SIGTERM received\n"); exit(0); } } But when i rewrite the function with this new version, I have a " comparison between pointer and integer" warning on the if statement: void handler( int sig){ printf("Signal recu\n"); if( signal == SIGINT){ click++; fprintf(stdout,"SIGINT received; Click = %d\n",click); if(click == N){ fprintf(stdout,"Exiting with SIGINT\n"); exit(0); } } else if(signal == SIGALRM){ fprintf(stdout,"SIGALRM received\n"); exit(0); } else if(signal == SIGTERM){ fprintf(stdout,"SIGTERM received\n"); exit(0); } Can someone tell me where is the prob?

    Read the article

  • Is O_NONBLOCK being set a property of the file descriptor or underlying file?

    - by Daniel Trebbien
    From what I have been reading on The Open Group website on fcntl, open, read, and write, I get the impression that whether O_NONBLOCK is set on a file descriptor, and hence whether non-blocking I/O is used with the descriptor, should be a property of that file descriptor rather than the underlying file. Being a property of the file descriptor means, for example, that if I duplicate a file descriptor or open another descriptor to the same file, then I can use blocking I/O with one and non-blocking I/O with the other. Experimenting with a FIFO, however, it appears that it is not possible to have a blocking I/O descriptor and non-blocking I/O descriptor to the FIFO simultaneously (so whether O_NONBLOCK is set is a property of the underlying file [the FIFO]): #include <errno.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> int main(int argc, char **argv) { int fds[2]; if (pipe(fds) == -1) { fprintf(stderr, "`pipe` failed.\n"); return EXIT_FAILURE; } int fd0_dup = dup(fds[0]); if (fd0_dup <= STDERR_FILENO) { fprintf(stderr, "Failed to duplicate the read end\n"); return EXIT_FAILURE; } if (fds[0] == fd0_dup) { fprintf(stderr, "`fds[0]` should not equal `fd0_dup`.\n"); return EXIT_FAILURE; } if ((fcntl(fds[0], F_GETFL) & O_NONBLOCK)) { fprintf(stderr, "`fds[0]` should not have `O_NONBLOCK` set.\n"); return EXIT_FAILURE; } if (fcntl(fd0_dup, F_SETFL, fcntl(fd0_dup, F_GETFL) | O_NONBLOCK) == -1) { fprintf(stderr, "Failed to set `O_NONBLOCK` on `fd0_dup`\n"); return EXIT_FAILURE; } if ((fcntl(fds[0], F_GETFL) & O_NONBLOCK)) { fprintf(stderr, "`fds[0]` should still have `O_NONBLOCK` unset.\n"); return EXIT_FAILURE; // RETURNS HERE } char buf[1]; if (read(fd0_dup, buf, 1) != -1) { fprintf(stderr, "Expected `read` on `fd0_dup` to fail immediately\n"); return EXIT_FAILURE; } else if (errno != EAGAIN) { fprintf(stderr, "Expected `errno` to be `EAGAIN`\n"); return EXIT_FAILURE; } return EXIT_SUCCESS; } This leaves me thinking: is it ever possible to have a non-blocking I/O descriptor and blocking I/O descriptor to the same file and if so, does it depend on the type of file (regular file, FIFO, block special file, character special file, socket, etc.)?

    Read the article

  • C++ NetUserAdd() not working?

    - by Brett Powell
    I posted earlier about how to do this, and got some great replies, and have managed to get the code written based off the MSDN example. However, it does not seem to be working properly. Its printing out the ERROR_ACCESS_DENIED message, but im not sure why as I am running it as a full admin. I was initially trying to create a USER_PRIV_ADMIN, but the MSDN said it can only use USER_PRIV_USER, but sadly neither work. Im hoping someone can spot a mistake or has an idea. Thanks! void AddRDPUser() { USER_INFO_1 ui; DWORD dwLevel = 1; DWORD dwError = 0; NET_API_STATUS nStatus; ui.usri1_name = L"DummyUserAccount"; ui.usri1_password = L"a2cDz3rQpG8"; //ignored by NetUserAdd //ui.usri1_password_age = -1; ui.usri1_priv = USER_PRIV_USER; //USER_PRIV_ADMIN; ui.usri1_home_dir = NULL; ui.usri1_comment = NULL; ui.usri1_flags = UF_SCRIPT; ui.usri1_script_path = NULL; nStatus = NetUserAdd(NULL, dwLevel, (LPBYTE)&ui, &dwError); switch (nStatus) { case NERR_Success: { Msg("SUCCESS!\n"); break; } case NERR_InvalidComputer: { fprintf(stderr, "A system error has occurred: NERR_InvalidComputer\n"); break; } case NERR_NotPrimary: { fprintf(stderr, "A system error has occurred: NERR_NotPrimary\n"); break; } case NERR_GroupExists: { fprintf(stderr, "A system error has occurred: NERR_GroupExists\n"); break; } case NERR_UserExists: { fprintf(stderr, "A system error has occurred: NERR_UserExists\n"); break; } case NERR_PasswordTooShort: { fprintf(stderr, "A system error has occurred: NERR_PasswordTooShort\n"); break; } case ERROR_ACCESS_DENIED: { fprintf(stderr, "A system error has occurred: ERROR_ACCESS_DENIED\n"); break; } } }

    Read the article

  • How do i change the BIOS boot splash screen?

    - by YumYumYum
    I have a Dell PC which has very ugly and bad luck looking Alien face on every boot. I want to change it or disable it forever, but in Bios they do not have any options. How can i change this from my linux Fedora or ArchLinux which is running now? Tried following does not work. ( http://www.pixelbeat.org/docs/bios/ ) ./flashrom -r firmware.old #save current flash ROM just in case ./flashrom -wv firmware.new #write and verify new flash ROM image Also tried: $ cat c.c #include <stdio.h> #include <inttypes.h> #include <netinet/in.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #define lengthof(x) (sizeof(x)/sizeof(x[0])) uint16_t checksum(const uint8_t* data, int len) { uint16_t sum = 0; int i; for (i=0; i<len; i++) sum+=*(data+i); return htons(sum); } void usage(void) { fprintf(stderr,"Usage: therm_limit [0,50,53,56,60,63,66,70]\n"); fprintf(stderr,"Report therm limit of terminal in BIOS\n"); fprintf(stderr,"If temp specifed, it is changed if required.\n"); exit(EXIT_FAILURE); } #define CHKSUM_START 51 #define CHKSUM_END 109 #define THERM_OFFSET 67 #define THERM_SHIFT 0 #define THERM_MASK (0x7 << THERM_SHIFT) #define THERM_OFF 0 uint8_t thermal_limits[]={0,50,53,56,60,63,66,70}; #define THERM_MAX (lengthof(thermal_limits)-1) #define DEV_NVRAM "/dev/nvram" #define NVRAM_MAX 114 uint8_t nvram[NVRAM_MAX]; int main(int argc, char* argv[]) { int therm_request = -1; if (argc>2) usage(); if (argc==2) { if (*argv[1]=='-') usage(); therm_request=atoi(argv[1]); int i; for (i=0; i<lengthof(thermal_limits); i++) if (thermal_limits[i]==therm_request) break; if (i==lengthof(thermal_limits)) usage(); else therm_request=i; } int fd_nvram=open(DEV_NVRAM, O_RDWR); if (fd_nvram < 0) { fprintf(stderr,"Error opening %s [%m]\n", DEV_NVRAM); exit(EXIT_FAILURE); } if (read(fd_nvram, nvram, sizeof(nvram))==-1) { fprintf(stderr,"Error reading %s [%m]\n", DEV_NVRAM); close(fd_nvram); exit(EXIT_FAILURE); } uint16_t chksum = *(uint16_t*)(nvram+CHKSUM_END); printf("%04X\n",chksum); exit(0); if (chksum == checksum(nvram+CHKSUM_START, CHKSUM_END-CHKSUM_START)) { uint8_t therm_byte = *(uint16_t*)(nvram+THERM_OFFSET); uint8_t therm_status=(therm_byte & THERM_MASK) >> THERM_SHIFT; printf("Current thermal limit: %d°C\n", thermal_limits[therm_status]); if ( (therm_status == therm_request) ) therm_request=-1; if (therm_request != -1) { if (therm_status != therm_request) printf("Setting thermal limit to %d°C\n", thermal_limits[therm_request]); uint8_t new_therm_byte = (therm_byte & ~THERM_MASK) | (therm_request << THERM_SHIFT); *(uint8_t*)(nvram+THERM_OFFSET) = new_therm_byte; *(uint16_t*)(nvram+CHKSUM_END) = checksum(nvram+CHKSUM_START, CHKSUM_END-CHKSUM_START); (void) lseek(fd_nvram,0,SEEK_SET); if (write(fd_nvram, nvram, sizeof(nvram))!=sizeof(nvram)) { fprintf(stderr,"Error writing %s [%m]\n", DEV_NVRAM); close(fd_nvram); exit(EXIT_FAILURE); } } } else { fprintf(stderr,"checksum failed. Aborting\n"); close(fd_nvram); exit(EXIT_FAILURE); } return EXIT_SUCCESS; } $ gcc c.c -o bios # ./bios 16DB

    Read the article

  • Streamed mp3 only plays for 1 second

    - by angel6
    Hi, I'm using the plaympeg.c (modified) code of smpeg as a media player. I've got ffserver running as a streaming server. I'm a streaming an mp3 file over http. But when I run plaympeg.c, it plays the streamed file only for a second. When I run plaympeg again, it starts off from where it left and plays for 1 second. Does anyone know why this happens an how to fix it? I've tested it out on WMP and it plays the entire file in one go. So, i guess it's not a problem with the streaming or ffserver.conf include include include include /* #ifdef unix */ include include include include include include include define NET_SUPPORT /* General network support */ define HTTP_SUPPORT /* HTTP support */ ifdef NET_SUPPORT include include include include endif include "smpeg.h" ifdef NET_SUPPORT int tcp_open(char * address, int port) { struct sockaddr_in stAddr; struct hostent * host; int sock; struct linger l; memset(&stAddr,0,sizeof(stAddr)); stAddr.sin_family = AF_INET ; stAddr.sin_port = htons(port); if((host = gethostbyname(address)) == NULL) return(0); stAddr.sin_addr = *((struct in_addr *) host-h_addr_list[0]) ; if((sock = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP)) < 0) return(0); l.l_onoff = 1; l.l_linger = 5; if(setsockopt(sock, SOL_SOCKET, SO_LINGER, (char*) &l, sizeof(l)) < 0) return(0); if(connect(sock, (struct sockaddr *) &stAddr, sizeof(stAddr)) < 0) return(0); return(sock); } ifdef HTTP_SUPPORT int http_open(char * arg) { char * host; int port; char * request; int tcp_sock; char http_request[1024]; char c; printf("\nin http_open passed parameter = %s\n",arg); /* Check for URL syntax */ if(strncmp(arg, "http://", strlen("http://"))) return(0); /* Parse URL */ port = 80; host = arg + strlen("http://"); if((request = strchr(host, '/')) == NULL) return(0); request++ = 0; if(strchr(host, ':') != NULL) / port is specified */ { port = atoi(strchr(host, ':') + 1); *strchr(host, ':') = 0; } /* Open a TCP socket */ if(!(tcp_sock = tcp_open(host, port))) { perror("http_open"); return(0); } /* Send HTTP GET request */ sprintf(http_request, "GET /%s HTTP/1.0\r\n" "User-Agent: Mozilla/2.0 (Win95; I)\r\n" "Pragma: no-cache\r\n" "Host: %s\r\n" "Accept: /\r\n" "\r\n", request, host); send(tcp_sock, http_request, strlen(http_request), 0); /* Parse server reply */ do read(tcp_sock, &c, sizeof(char)); while(c != ' '); read(tcp_sock, http_request, 4*sizeof(char)); http_request[4] = 0; if(strcmp(http_request, "200 ")) { fprintf(stderr, "http_open: "); do { read(tcp_sock, &c, sizeof(char)); fprintf(stderr, "%c", c); } while(c != '\r'); fprintf(stderr, "\n"); return(0); } return(tcp_sock); } endif endif void update(SDL_Surface *screen, Sint32 x, Sint32 y, Uint32 w, Uint32 h) { if ( screen-flags & SDL_DOUBLEBUF ) { SDL_Flip(screen); } } /* Flag telling the UI that the movie or song should be skipped */ int done; void next_movie(int sig) { done = 1; } int main(int argc, char *argv[]) { int use_audio, use_video; int fullscreen; int scalesize; int scale_width, scale_height; int loop_play; int i, pause; int volume; Uint32 seek; float skip; int bilinear_filtering; SDL_Surface *screen; SMPEG *mpeg; SMPEG_Info info; char *basefile; SDL_version sdlver; SMPEG_version smpegver; int fd; char buf[32]; int status; printf("\nchecking command line options "); /* Get the command line options */ use_audio = 1; use_video = 1; fullscreen = 0; scalesize = 1; scale_width = 0; scale_height = 0; loop_play = 0; volume = 100; seek = 0; skip = 0; bilinear_filtering = 0; fd = 0; for ( i=1; argv[i] && (argv[i][0] == '-') && (argv[i][1] != 0); ++i ) { if ( strcmp(argv[i], "--fullscreen") == 0 ) { fullscreen = 1; } else if ((strcmp(argv[i], "--seek") == 0)||(strcmp(argv[i], "-S") == 0)) { ++i; if ( argv[i] ) { seek = atol(argv[i]); } } else if ((strcmp(argv[i], "--volume") == 0)||(strcmp(argv[i], "-v") == 0)) { ++i; if (i >= argc) { fprintf(stderr, "Please specify volume when using --volume or -v\n"); return(1); } if ( argv[i] ) { volume = atoi(argv[i]); } if ( ( volume < 0 ) || ( volume 100 ) ) { fprintf(stderr, "Volume must be between 0 and 100\n"); volume = 100; } } else { fprintf(stderr, "Warning: Unknown option: %s\n", argv[i]); } } printf("\nuse video = %d, use audio = %d\n",use_video, use_audio); printf("\ngoing to check input parameters\n"); if defined(linux) || defined(FreeBSD) /* Plaympeg doesn't need a mouse */ putenv("SDL_NOMOUSE=1"); endif /* Play the mpeg files! */ status = 0; for ( ; argv[i]; ++i ) { /* Initialize SDL */ if ( use_video ) { if ((SDL_Init(SDL_INIT_VIDEO) < 0) || !SDL_VideoDriverName(buf, 1)) { fprintf(stderr, "Warning: Couldn't init SDL video: %s\n", SDL_GetError()); fprintf(stderr, "Will ignore video stream\n"); use_video = 0; } printf("\ninitialised video\n"); } if ( use_audio ) { if ((SDL_Init(SDL_INIT_AUDIO) < 0) || !SDL_AudioDriverName(buf, 1)) { fprintf(stderr, "Warning: Couldn't init SDL audio: %s\n", SDL_GetError()); fprintf(stderr, "Will ignore audio stream\n"); use_audio = 0; } } /* Allow Ctrl-C when there's no video output */ signal(SIGINT, next_movie); printf("\nchecking defined supports\n"); /* Create the MPEG stream */ ifdef NET_SUPPORT printf("\ndefined NET_SUPPORT\n"); ifdef HTTP_SUPPORT printf("\ndefined HTTP_SUPPORT\n"); /* Check if source is an http URL */ printf("\nabout to call http_open\n"); printf("\nhere we go\n"); if((fd = http_open(argv[i])) != 0) mpeg = SMPEG_new_descr(fd, &info, use_audio); else endif endif { if(strcmp(argv[i], "-") == 0) /* Use stdin for input */ mpeg = SMPEG_new_descr(0, &info, use_audio); else mpeg = SMPEG_new(argv[i], &info, use_audio); } if ( SMPEG_error(mpeg) ) { fprintf(stderr, "%s: %s\n", argv[i], SMPEG_error(mpeg)); SMPEG_delete(mpeg); status = -1; continue; } SMPEG_enableaudio(mpeg, use_audio); SMPEG_enablevideo(mpeg, use_video); SMPEG_setvolume(mpeg, volume); /* Print information about the video */ basefile = strrchr(argv[i], '/'); if ( basefile ) { ++basefile; } else { basefile = argv[i]; } if ( info.has_audio && info.has_video ) { printf("%s: MPEG system stream (audio/video)\n", basefile); } else if ( info.has_audio ) { printf("%s: MPEG audio stream\n", basefile); } else if ( info.has_video ) { printf("%s: MPEG video stream\n", basefile); } if ( info.has_video ) { printf("\tVideo %dx%d resolution\n", info.width, info.height); } if ( info.has_audio ) { printf("\tAudio %s\n", info.audio_string); } if ( info.total_size ) { printf("\tSize: %d\n", info.total_size); } if ( info.total_time ) { printf("\tTotal time: %f\n", info.total_time); } /* Set up video display if needed */ if ( info.has_video && use_video ) { const SDL_VideoInfo *video_info; Uint32 video_flags; int video_bpp; int width, height; /* Get the "native" video mode */ video_info = SDL_GetVideoInfo(); switch (video_info->vfmt->BitsPerPixel) { case 16: case 24: case 32: video_bpp = video_info->vfmt->BitsPerPixel; break; default: video_bpp = 16; break; } if ( scale_width ) { width = scale_width; } else { width = info.width; } width *= scalesize; if ( scale_height ) { height = scale_height; } else { height = info.height; } height *= scalesize; video_flags = SDL_SWSURFACE; if ( fullscreen ) { video_flags = SDL_FULLSCREEN|SDL_DOUBLEBUF|SDL_HWSURFACE; } video_flags |= SDL_ASYNCBLIT; video_flags |= SDL_RESIZABLE; screen = SDL_SetVideoMode(width, height, video_bpp, video_flags); if ( screen == NULL ) { fprintf(stderr, "Unable to set %dx%d video mode: %s\n", width, height, SDL_GetError()); continue; } SDL_WM_SetCaption(argv[i], "plaympeg"); if ( screen->flags & SDL_FULLSCREEN ) { SDL_ShowCursor(0); } SMPEG_setdisplay(mpeg, screen, NULL, update); SMPEG_scaleXY(mpeg, screen->w, screen->h); } else { SDL_QuitSubSystem(SDL_INIT_VIDEO); } /* Set any special playback parameters */ if ( loop_play ) { SMPEG_loop(mpeg, 1); } /* Seek starting position */ if(seek) SMPEG_seek(mpeg, seek); /* Skip seconds to starting position */ if(skip) SMPEG_skip(mpeg, skip); /* Play it, and wait for playback to complete */ SMPEG_play(mpeg); done = 0; pause = 0; while ( ! done && ( pause || (SMPEG_status(mpeg) == SMPEG_PLAYING) ) ) { SDL_Event event; while ( use_video && SDL_PollEvent(&event) ) { switch (event.type) { case SDL_VIDEORESIZE: { SDL_Surface *old_screen = screen; SMPEG_pause(mpeg); screen = SDL_SetVideoMode(event.resize.w, event.resize.h, screen->format->BitsPerPixel, screen->flags); if ( old_screen != screen ) { SMPEG_setdisplay(mpeg, screen, NULL, update); } SMPEG_scaleXY(mpeg, screen-w, screen-h); SMPEG_pause(mpeg); } break; case SDL_KEYDOWN: if ( (event.key.keysym.sym == SDLK_ESCAPE) || (event.key.keysym.sym == SDLK_q) ) { // Quit done = 1; } else if ( event.key.keysym.sym == SDLK_RETURN ) { // toggle fullscreen if ( event.key.keysym.mod & KMOD_ALT ) { SDL_WM_ToggleFullScreen(screen); fullscreen = (screen-flags & SDL_FULLSCREEN); SDL_ShowCursor(!fullscreen); } } else if ( event.key.keysym.sym == SDLK_UP ) { // Volume up if ( volume < 100 ) { if ( event.key.keysym.mod & KMOD_SHIFT ) { // 10+ volume += 10; } else if ( event.key.keysym.mod & KMOD_CTRL ) { // 100+ volume = 100; } else { // 1+ volume++; } if ( volume 100 ) volume = 100; SMPEG_setvolume(mpeg, volume); } } else if ( event.key.keysym.sym == SDLK_DOWN ) { // Volume down if ( volume 0 ) { if ( event.key.keysym.mod & KMOD_SHIFT ) { volume -= 10; } else if ( event.key.keysym.mod & KMOD_CTRL ) { volume = 0; } else { volume--; } if ( volume < 0 ) volume = 0; SMPEG_setvolume(mpeg, volume); } } else if ( event.key.keysym.sym == SDLK_PAGEUP ) { // Full volume volume = 100; SMPEG_setvolume(mpeg, volume); } else if ( event.key.keysym.sym == SDLK_PAGEDOWN ) { // Volume off volume = 0; SMPEG_setvolume(mpeg, volume); } else if ( event.key.keysym.sym == SDLK_SPACE ) { // Toggle play / pause if ( SMPEG_status(mpeg) == SMPEG_PLAYING ) { SMPEG_pause(mpeg); pause = 1; } else { SMPEG_play(mpeg); pause = 0; } } else if ( event.key.keysym.sym == SDLK_RIGHT ) { // Forward if ( event.key.keysym.mod & KMOD_SHIFT ) { SMPEG_skip(mpeg, 100); } else if ( event.key.keysym.mod & KMOD_CTRL ) { SMPEG_skip(mpeg, 50); } else { SMPEG_skip(mpeg, 5); } } else if ( event.key.keysym.sym == SDLK_LEFT ) { // Reverse if ( event.key.keysym.mod & KMOD_SHIFT ) { } else if ( event.key.keysym.mod & KMOD_CTRL ) { } else { } } else if ( event.key.keysym.sym == SDLK_KP_MINUS ) { // Scale minus if ( scalesize > 1 ) { scalesize--; } } else if ( event.key.keysym.sym == SDLK_KP_PLUS ) { // Scale plus scalesize++; } else if ( event.key.keysym.sym == SDLK_f ) { // Toggle filtering on/off if ( bilinear_filtering ) { SMPEG_Filter *filter = SMPEGfilter_null(); filter = SMPEG_filter( mpeg, filter ); filter-destroy(filter); bilinear_filtering = 0; } else { SMPEG_Filter *filter = SMPEGfilter_bilinear(); filter = SMPEG_filter( mpeg, filter ); filter-destroy(filter); bilinear_filtering = 1; } } break; case SDL_QUIT: done = 1; break; default: break; } } SDL_Delay(1000/2); } SMPEG_delete(mpeg); } SDL_Quit(); if defined(HTTP_SUPPORT) if(fd) close(fd); endif return(status); }

    Read the article

  • Help debugging c fifos code - stack smashing detected - open call not functioning - removing pipes

    - by nunos
    I have three bugs/questions regarding the source code pasted below: stack smashing deteced: In order to compile and not have that error I have addedd the gcc compile flag -fno-stack-protector. However, this should be just a temporary solution, since I would like to find where the cause for this is and correct it. However, I haven't been able to do so. Any clues? For some reason, the last open function call doesn't work and the programs just stops there, without an error, even though the fifo already exists. I want to delete the pipes from the filesystem after before terminating the processes. I have added close and unlink statements at the end, but the fifos are not removed. What am I doing wrong? Thanks very much in advance. P.S.: I am pasting here the whole source file for additional clarity. Just ignore the comments, since they are in my own native language. server.c: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <errno.h> #define MAX_INPUT_LENGTH 100 #define FIFO_NAME_MAX_LEN 20 #define FIFO_DIR "/tmp/" #define FIFO_NAME_CMD_CLI_TO_SRV "lrc_cmd_cli_to_srv" typedef enum { false, true } bool; bool background = false; char* logfile = NULL; void read_from_fifo(int fd, char** var) { int n_bytes; read(fd, &n_bytes, sizeof(int)); *var = (char *) malloc (n_bytes); read(fd, *var, n_bytes); printf("read %d bytes '%s'\n", n_bytes, *var); } void write_to_fifo(int fd, char* data) { int n_bytes = (strlen(data)+1) * sizeof(char); write(fd, &n_bytes, sizeof(int)); //primeiro envia o numero de bytes que a proxima instrucao write ira enviar write(fd, data, n_bytes); printf("writing %d bytes '%s'\n", n_bytes, data); } int main(int argc, char* argv[]) { //CRIA FIFO CMD_CLI_TO_SRV, se ainda nao existir char* fifo_name_cmd_cli_to_srv; fifo_name_cmd_cli_to_srv = (char*) malloc ( (strlen(FIFO_NAME_CMD_CLI_TO_SRV) + strlen(FIFO_DIR) + 1) * sizeof(char) ); strcpy(fifo_name_cmd_cli_to_srv, FIFO_DIR); strcat(fifo_name_cmd_cli_to_srv, FIFO_NAME_CMD_CLI_TO_SRV); int n = mkfifo(fifo_name_cmd_cli_to_srv, 0660); //TODO ver permissoes if (n < 0 && errno != EEXIST) //se houver erro, e nao for por causa de ja haver um com o mesmo nome, termina o programa { fprintf(stderr, "erro ao criar o fifo\n"); fprintf(stderr, "errno: %d\n", errno); exit(4); } //se por acaso já existir, nao cria o fifo e continua o programa normalmente //le informacao enviada pelo cliente, nesta ordem: //1. pid (em formato char*) do processo cliente //2. comando /CONNECT //3. nome de fifo INFO_SRV_TO_CLIXXX //4. nome de fifo MSG_SRV_TO_CLIXXX char* command; char* fifo_name_info_srv_to_cli; char* fifo_name_msg_srv_to_cli; char* client_pid_string; int client_pid; int fd_cmd_cli_to_srv, fd_info_srv_to_cli; fd_cmd_cli_to_srv = open(fifo_name_cmd_cli_to_srv, O_RDONLY); read_from_fifo(fd_cmd_cli_to_srv, &client_pid_string); client_pid = atoi(client_pid_string); read_from_fifo(fd_cmd_cli_to_srv, &command); //recebe commando /CONNECT read_from_fifo(fd_cmd_cli_to_srv, &fifo_name_info_srv_to_cli); //recebe nome de fifo INFO_SRV_TO_CLIXXX read_from_fifo(fd_cmd_cli_to_srv, &fifo_name_msg_srv_to_cli); //recebe nome de fifo MSG_TO_SRV_TO_CLIXXX //CIRA FIFO MSG_CLIXXX_TO_SRV char fifo_name_msg_cli_to_srv[FIFO_NAME_MAX_LEN]; strcpy(fifo_name_msg_cli_to_srv, FIFO_DIR); strcat(fifo_name_msg_cli_to_srv, "lrc_msg_cli"); strcat(fifo_name_msg_cli_to_srv, client_pid_string); strcat(fifo_name_msg_cli_to_srv, "_to_srv"); n = mkfifo(fifo_name_msg_cli_to_srv, 0660); if (n < 0) { fprintf(stderr, "error creating %s\n", fifo_name_msg_cli_to_srv); fprintf(stderr, "errno: %d\n", errno); exit(5); } //envia ao cliente a resposta ao commando /CONNECT fd_info_srv_to_cli = open(fifo_name_info_srv_to_cli, O_WRONLY); write_to_fifo(fd_info_srv_to_cli, fifo_name_msg_cli_to_srv); free(logfile); free(fifo_name_cmd_cli_to_srv); close(fd_cmd_cli_to_srv); unlink(fifo_name_cmd_cli_to_srv); unlink(fifo_name_msg_cli_to_srv); unlink(fifo_name_msg_srv_to_cli); unlink(fifo_name_info_srv_to_cli); printf("fim\n"); return 0; } client.c: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <errno.h> #define MAX_INPUT_LENGTH 100 #define PID_BUFFER_LEN 10 #define FIFO_NAME_CMD_CLI_TO_SRV "lrc_cmd_cli_to_srv" #define FIFO_NAME_INFO_SRV_TO_CLI "lrc_info_srv_to_cli" #define FIFO_NAME_MSG_SRV_TO_CLI "lrc_msg_srv_to_cli" #define COMMAND_MAX_LEN 100 #define FIFO_DIR "/tmp/" typedef enum { false, true } bool; char* nickname; char* name; char* email; void write_to_fifo(int fd, char* data) { int n_bytes = (strlen(data)+1) * sizeof(char); write(fd, &n_bytes, sizeof(int)); //primeiro envia o numero de bytes que a proxima instrucao write ira enviar write(fd, data, n_bytes); printf("writing %d bytes '%s'\n", n_bytes, data); } void read_from_fifo(int fd, char** var) { int n_bytes; read(fd, &n_bytes, sizeof(int)); *var = (char *) malloc (n_bytes); printf("read '%s'\n", *var); read(fd, *var, n_bytes); } int main(int argc, char* argv[]) { pid_t pid = getpid(); //CRIA FIFO INFO_SRV_TO_CLIXXX char pid_string[PID_BUFFER_LEN]; sprintf(pid_string, "%d", pid); char* fifo_name_info_srv_to_cli; fifo_name_info_srv_to_cli = (char *) malloc ( (strlen(FIFO_DIR) + strlen(FIFO_NAME_INFO_SRV_TO_CLI) + strlen(pid_string) + 1 ) * sizeof(char) ); strcpy(fifo_name_info_srv_to_cli, FIFO_DIR); strcat(fifo_name_info_srv_to_cli, FIFO_NAME_INFO_SRV_TO_CLI); strcat(fifo_name_info_srv_to_cli, pid_string); int n = mkfifo(fifo_name_info_srv_to_cli, 0660); if (n < 0) { fprintf(stderr, "error creating %s\n", fifo_name_info_srv_to_cli); fprintf(stderr, "errno: %d\n", errno); exit(6); } int fd_cmd_cli_to_srv, fd_info_srv_to_cli; fd_cmd_cli_to_srv = open("/tmp/lrc_cmd_cli_to_srv", O_WRONLY); char command[COMMAND_MAX_LEN]; printf("> "); scanf("%s", command); while (strcmp(command, "/CONNECT")) { printf("O primeiro comando deverá ser \"/CONNECT\"\n"); printf("> "); scanf("%s", command); } //CRIA FIFO MSG_SRV_TO_CLIXXX char* fifo_name_msg_srv_to_cli; fifo_name_msg_srv_to_cli = (char *) malloc ( (strlen(FIFO_DIR) + strlen(FIFO_NAME_MSG_SRV_TO_CLI) + strlen(pid_string) + 1) * sizeof(char) ); strcpy(fifo_name_msg_srv_to_cli, FIFO_DIR); strcat(fifo_name_msg_srv_to_cli, FIFO_NAME_MSG_SRV_TO_CLI); strcat(fifo_name_msg_srv_to_cli, pid_string); n = mkfifo(fifo_name_msg_srv_to_cli, 0660); if (n < 0) { fprintf(stderr, "error creating %s\n", fifo_name_info_srv_to_cli); fprintf(stderr, "errno: %d\n", errno); exit(7); } // ENVIA COMANDO /CONNECT write_to_fifo(fd_cmd_cli_to_srv, pid_string); //envia pid do processo cliente write_to_fifo(fd_cmd_cli_to_srv, command); //envia commando /CONNECT write_to_fifo(fd_cmd_cli_to_srv, fifo_name_info_srv_to_cli); //envia nome de fifo INFO_SRV_TO_CLIXXX write_to_fifo(fd_cmd_cli_to_srv, fifo_name_msg_srv_to_cli); //envia nome de fifo MSG_TO_SRV_TO_CLIXXX // recebe do servidor a resposta ao comanddo /CONNECT printf("msg1\n"); printf("vamos tentar abrir %s\n", fifo_name_info_srv_to_cli); fd_info_srv_to_cli = open(fifo_name_info_srv_to_cli, O_RDONLY); printf("%s aberto", fifo_name_info_srv_to_cli); if (fd_info_srv_to_cli < 0) { fprintf(stderr, "erro ao criar %s\n", fifo_name_info_srv_to_cli); fprintf(stderr, "errno: %d\n", errno); } printf("msg2\n"); char* fifo_name_msg_cli_to_srv; printf("msg3\n"); read_from_fifo(fd_info_srv_to_cli, &fifo_name_msg_cli_to_srv); printf("msg4\n"); free(nickname); free(name); free(email); free(fifo_name_info_srv_to_cli); free(fifo_name_msg_srv_to_cli); unlink(fifo_name_msg_srv_to_cli); unlink(fifo_name_info_srv_to_cli); printf("fim\n"); return 0; } makefile: CC = gcc CFLAGS = -Wall -lpthread -fno-stack-protector all: client server client: client.c $(CC) $(CFLAGS) client.c -o client server: server.c $(CC) $(CFLAGS) server.c -o server clean: rm -f client server *~

    Read the article

1 2 3 4 5 6 7 8 9 10  | Next Page >