Search Results

Search found 429 results on 18 pages for 'imgur'.

Page 10/18 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

  • Problems setting up home web server

    - by putmatrix
    Has anyone been able to get a server working with the router smcwbr14t-g? Although I have been able to get Apache set up correctly and my website works on the internal IP 192.168.2.101, I've been running into a dead end when trying to get it to show up on my external IP. In my router, there is no option for port forwarding, but there are options for a 'virtual server'. Following the manual, I have it set up like this: http://imgur.com/zrcV7.png I also disabled the firewall. I configured Apache to listen to ports 80, 81, and 443, none of which solved the problem. However, the IP's 192.168.2.101:443 and :81 load fine. The problem is that I still cannot load the web site from my external IP, either from my computer or outside.

    Read the article

  • XNA Masking Mayhem

    - by TropicalFlesh
    I'd like to start by mentioning that I'm just an amateur programmer of the past 2 years with no formal training and know very little about maximizing the potential of graphics hardware. I can write shaders and manipulate a multi-layered drawing environment, but I've basically stuck to minimalist pixel shaders. I'm working on putting dynamic point light shadows in my 2d sidescroller, and have had it working to a reasonable degree. Just chucking it in without working on serious optimizations outside of basic culling, I can get 50 lights or so onscreen at once and still hover around 100 fps. The only issue is that I'm on a very high end machine and would like to target the game at as many platforms I can, low and high end. The way I'm doing shadows involves a lot of masking before I can finally draw the light to my light layer. Basically, my technique to achieveing such shadows is as follows. See pics in this album http://imgur.com/a/m2fWw#0 The dark gray represents the background tiles, the light gray represents the foreground tiles, and the yellow represents the shadow-emitting foreground tile. I'll draw the light using a radial gradient and a color of choice I'll then exclude light from the mask by drawing some geometry extending through the tile from my point light. I actually don't mask the light yet at this point, but I'm just illustrating the technique in this image Finally, I'll re-include the foreground layer in my mask, as I only want shadows to collect on the background layer and finally multiply the light with it's mask to the light layer My question is simple - How can I go about reducing the amount of render target switches I need to do to achieve the following: a. Draw mask to exclude shadows from the foreground to it's own target once per frame b. For each light that emits shadows, -Begin light mask as full white -Render shadow geometry as transparent with an opaque blendmode to eliminate shadowed areas from the mask -Render foreground mask back over the light mask to reintroduce light to the foreground c. Multiply light texture with it's individual mask to the main light layer.

    Read the article

  • How to manually set color of Unity Panel?

    - by JamesTheAwesomeDude
    I was just wondering if there's a way to set the color of the Unity panel manually, as opposed to having it derived from smooshing all the colors of the wallpaper together. (the launcher on the left side of the screen that comes default in Ubuntu is the Unity Panel, right? If not, please correct me on my terminology.) The reason I want this is because I have this cool wallpaper I found on DeviantArt, and I used GIMP to make Dawn, Dusk, and Midnight versions of it. Then, I set them with a transition effect, so that the lighting changes over the course of the day. Unfortunately, the Unity Panel turns a sickly sewer green at night (it could also be said to look like radioactive barf.) Either way, I don't like my launcher thingy looking like that. I'd prefer to stay away from programs that let you customise the Unity Panel (I'm fine with using sudo nano to edit system config files,) but I would if it were the only option. Here are some screenshots, one with a grey-themed wallpaper, one with lots of red, and the hill at night, (the one that makes the unity panel look like radioactive barf.): http://imgur.com/a/0Gqcd

    Read the article

  • How can I roll back xserver-xorg-core and xserver-common?

    - by Ville Sundberg
    A recent update to Xorg broke my desktop, which now looks like this: http://i.imgur.com/PbBxh.jpg In short, the desktop background is not updating on the secondary display. (And if there is no secondary display, the primary display background stops updating.) Looking into the history, I found that this happened right after upgrading two packages: xserver-xorg-core xserver-common These were upgraded to 1.9.0-0ubuntu7.3. I'd like to downgrade these packages. How do I do that? I've checked that both have another version in the maverick repo: xserver-xorg-core: Installed: 2:1.9.0-0ubuntu7.3 Candidate: 2:1.9.0-0ubuntu7.3 Version table: *** 2:1.9.0-0ubuntu7.3 0 500 http://fi.archive.ubuntu.com/ubuntu/ maverick-updates/main amd64 Packages 100 /var/lib/dpkg/status 2:1.9.0-0ubuntu7 0 500 http://fi.archive.ubuntu.com/ubuntu/ maverick/main amd64 Packages However, apt won't let me downgrade them: ville@fluxx ~ % sudo apt-get install xserver-common=2:1.9.0-0ubuntu7 xserver-xorg-core=2:1.9.0-0ubuntu7 The following packages have unmet dependencies: xserver-xorg-core : Depends: xserver-xorg but it is not going to be installed E: Broken packages And this is the reason: ville@fluxx ~ % sudo apt-get install xserver-common=2:1.9.0-0ubuntu7 xserver-xorg-core=2:1.9.0-0ubuntu7 xserver-xorg-core The following packages have unmet dependencies: xserver-xorg-core : Depends: xserver-common (>= 2:1.9.0-0ubuntu7.3) but 2:1.9.0-0ubuntu7 is to be installed E: Broken packages Am I out of options here?

    Read the article

  • How to prevent 2D camera rotation if it would violate the bounds of the camera?

    - by Andrew Price
    I'm working on a Camera class and I have a rectangle field named Bounds that determines the bounds of the camera. I have it working for zooming and moving the camera so that the camera cannot exit its bounds. However, I'm a bit confused on how to do the same for rotation. Currently I allow rotating of the camera's Z-axis. However, if sufficiently zoomed out, upon rotating the camera, areas of the screen outside the camera's bounds can be shown. I'd like to deny the rotation assuming it meant that the newly rotated camera would expose areas outside the camera's bounds, but I'm not quite sure how. I'm still new to Matrix and Vector math and I'm not quite sure how to model if the newly rotated camera sees outside of its bounds, undo the rotation. Here's an image showing the problem: http://i.stack.imgur.com/NqprC.png The red is out of bounds and as a result, the camera should never be allowed to rotate itself like this. This seems like it would be a problem with all rotated values, but this is not the case when the camera is zoomed in enough. Here are the current member variables for the Camera class: private Vector2 _position = Vector2.Zero; private Vector2 _origin = Vector2.Zero; private Rectangle? _bounds = Rectangle.Empty; private float _rotation = 0.0f; private float _zoom = 1.0f; Is this possible to do? If so, could someone give me some guidance on how to accomplish this? Thanks. EDIT: I forgot to mention I am using a transformation matrix style camera that I input in to SpriteBatch.Begin. I am using the same transformation matrix from this tutorial.

    Read the article

  • Rotate a particle system

    - by Blueski
    Languages / Libraries in use: C++, OpenGL, GLUT Okay, here's the deal. I've got a particle system which shoots out alpha blended textures to produce a flame. The system only keeps track of very basic things such as, time alive, life, xyz and spread. The direction in which the flames are currently moving in is purely based on other things which are going on in my code ( I assume ). My goal however, is to attach the flame to the camera (DONE) and have the flame pointing in the direction my camera is facing (NOT WORKING). I've tried glRotate for both x,y,z and I can't get it to work properly. I'm currently using gluLookAt to move the camera, and get the flame to follow the XYZ of the camera by calling glTranslatef(camX, camY - offset, camZ); Any suggestions on how I can rotate the direction of the flame with the camera would be greatly appreciated. Heres an image of what I've got: http://i.imgur.com/YhV4w.png Notes: Crosshair depicts where camera is facing if I turn the camera, flame doesn't follow the crosshair Also asked here: http://stackoverflow.com/questions/9560396/rotate-a-particle-system but was referred here

    Read the article

  • DNS records on website.. What are they for?

    - by Blake Nic
    Recently we had to get some ddos protection for our website because of the large attacks we were seeing after getting a bit of popularity. We handed over our domain and hosting information to our ddos protection provider. It worked perfectly but I have a question. On our DNS records we have the Host and Answer and Type. The Host has our domain name there. The answer is this: SOMETEXTXXXX.dv.googlehosted.com. And when i copy and paste it into my browser it gives me a 404 error. But our website still loads and functions as it should. I don't understand why it would need this? I asked them about this and they said it is a method for ddos protection and the other IPs are the reverse proxy (the other ips give a 404 error too). Can anyone expand on this more please. How does all this tie in together and make the internet browser know where to point the person with all these reverse proxies and stuff I don't understand. Thank you. Here is an image for reference: http://i.stack.imgur.com/qo5QO.png

    Read the article

  • Bluetooth Headset pairs and appears in Sound Devices, but shows as Disconnected?

    - by Mike
    I recently got a TrueBlue TB-100T3 and tried pairing it with my computer (Windows 7 64-bit). At first it paired but would not appear under Sound Devices. I updated my Broadcom Bluetooth drivers here: http://www.broadcom.com/support/bluetooth/update.php Now my headset appears in both Playback and Recording, but shows as Disconnected. The device is on, paired, and appears under Device Manager as having no problems. I right-clicked and installed both the Hands-free Telephony and Headset services. Here is an image: http://i.stack.imgur.com/vG2S7.png Right-clicking the device and selecting Connect does nothing. Does anyone have a solution? Thanks!

    Read the article

  • Dualboot 12.04/windows 7 After installation from USB reboot straight to Windows with no option to select ubuntu and no boot loader

    - by Alkatraz
    windows 7 home premium intel i5 2500k CPU ASUSP8Z68-V PRO Motherboard GeForce GTX 570 GPU corsair 120Gb SSD (windows 7 os) WD 1tb HDD I select the USB drive in the BIOS and boot to it and choose install. i select to manually configure partitions, partition the 200gb of unallocated space on my 1Tb HDD into 16Gb swap file 30Gb / extf4 and 154Gb /home extf4. I make sure that the boot loader is installed to corsair 120Gb SSD (where the windows boot is) and installation goes smoothly. When i reboot after install it runs through bios strait into windows. I have tried upwards of a dozen times and i have also tried with linuxmint. I have also redownloaded the ISO and used two different programs to create the live usb. the installation seems to go well as i can see the partitions i have created in the windows device manager after install http://imgur.com/Wp0V1 I currently run lubuntu on my laptop but it is not a dual boot. i'm assuming this is a boot loader issue and i am assuming that inside those partitioned files in my screenshot there is a working OS of ubuntu 12.04 i just have no way of getting to it.

    Read the article

  • Kerberos: connection from win app running from IIS to SQL failed

    - by Mikhail Kislitsyn
    I have an IIS web-application with Windows authentication and impersonation. This application connects to SQL server. In this case Kerberos works fine. But there is a problem. Web-application runs windows application (not .NET), which also connects to the SQL server. Windows application runs with IIS app user credentials and impersonates current site user to connect to SQL server. scheme: http://i.stack.imgur.com/2cgv7.png When delegation for IIS user is set to "Trust this computer for delegation to any service" everything works fine. But I can't use this type of delegation according to security requirements. When I set delegation to "Specific services" and choose MSSQLSvc SPN, connection from windows application fails with "ANONIMOUS" fault. WireShark shows "KRB5KDC_ERR_BADOPTION" packet. What I'm doing wrong?

    Read the article

  • Libre Office/Writer PDF export: white borders appear between lines even after setting borders to none

    - by Yttric
    My document prints ok (exactly as it appears on the screen in Libre Office), but when I export to PDF and view the PDF on screen there are white borders around each text or picture object. Here's a sample snapshot from PDF/Preview: http://imgur.com/TWip5 I've tried selecting a paragraph and changing the border property to None as described in Libre Office help (http://help.libreoffice.org/Common/Borders), setting the "Line arrangement Default" to "Set no borders". But borders set by the Format dialog don't correspond to the borders I see in PDF/Preview. In PDF/Preview the border appears on line boundaries. Borders set in Format appear around each picture, for example. What am I doing wrong?

    Read the article

  • Server not sending a SYN/ACK packet in response to a SYN packet

    - by jeff
    Using iptraf, tcpdump and wireshark I can see a SYN packet coming in but only the ACK FLAG is set in reply packet. I'm running Debian 5 with kernel 2.6.36 I've turned off window_scaling and tcp_timestamps, tcp_tw_recycle and tcp_tw_reuse: cat /etc/sysctl.conf net.ipv4.tcp_tw_recycle = 0 net.ipv4.tcp_tw_reuse = 0 net.ipv4.tcp_window_scaling = 0 net.ipv4.tcp_timestamps = 0 I've attached an image of the wireshark output. http://imgur.com/pECG0.png Output to netstat netstat -natu | grep '72.23.130.104' tcp 0 0 97.107.134.212:18000 72.23.130.104:42905 SYN_RECV I've been doing everything possible to find a solution and have yet to figure out the problem, so any help/suggestions are much appreciated. UPDATE 1: I've set tcp_syncookies = 0 and noticed I am now replying with 1 SYN+ACK for every 50 SYN requests. The host trying to connect is sending a SYN request about once every second. PCAP FILE

    Read the article

  • scp through ssh gateway connection

    - by zidarsk8
    so my network layou is something like this (I don't have enough reputation to post images so here's the link) http://i.imgur.com/OaD4i.png now Alice has access to SSH gateway (just gateway from now on) with: ssh [email protected] and the authorized keys file on the gateway looks like this #/home/Alice/.ssh/authorized_keys command="ssh -t alice@web" ssh-rsa ABCD...E== alice@somehost so when Alice trys to connect to the Gateway with her private key, she actually gets connected to the Web server (the gateway pc can make a connection to the web server with a passwordless private key, so that stays transparent). The question 1) How can I set this up so that Alice will be able to scp things to web server too? 2) I know this makes a separete connection, but is there any way for this to work as a normal ssh so that even something like -R12345:localhost:22 would work?

    Read the article

  • Dependency errors on installing Banshee

    - by Ben Cracknell
    I just installed Ubuntu 12.10 (Verified the ISO hash as well). The VERY first thing I did was open the software centre and try to install banshee. I am met with the following error: The following packages have unmet dependencies: banshee: Depends: libc6 (>= 2.7) but 2.15-0ubuntu20 is to be installed Depends: libglib2.0-0 (>= 2.34.1) but 2.34.0-1ubuntu1 is to be installed Depends: libgtk2.0-0 (>= 2.24.0) but 2.24.13-0ubuntu2 is to be installed Depends: libsoup-gnome2.4-1 (>= 2.27.4) but 2.40.0-0ubuntu1 is to be installed Depends: libsoup2.4-1 (>= 2.26.1) but 2.40.0-0ubuntu1 is to be installed Depends: libx11-6 (>= 2:1.4.99.1) but 2:1.5.0-1 is to be installed Depends: mono-runtime (>= 2.10.1) but 2.10.8.1-5ubuntu1 is to be installed Depends: libc0.1 (>= 2.15) but it is not going to be installed Depends: libgconf2.0-cil (>= 2.24.0) but 2.24.2-2 is to be installed Depends: libgdk-pixbuf2.0-0 (>= 2.26.4) but 2.26.4-0ubuntu1 is to be installed Depends: libglib2.0-cil (>= 2.12.10-1ubuntu1) but 2.12.10-4 is to be installed Depends: libgtk2.0-cil (>= 2.12.10-1ubuntu1) but 2.12.10-4 is to be installed Depends: libmono-cairo4.0-cil (>= 2.10.1) but 2.10.8.1-5ubuntu1 is to be installed Depends: libmono-corlib4.0-cil (>= 2.10.1) but 2.10.8.1-5ubuntu1 is to be installed Depends: libmono-posix4.0-cil (>= 2.10.1) but 2.10.8.1-5ubuntu1 is to be installed Depends: libmono-system-core4.0-cil (>= 2.10.3) but 2.10.8.1-5ubuntu1 is to be installed Depends: libmono-system4.0-cil (>= 2.10.7) but 2.10.8.1-5ubuntu1 is to be installed Depends: gnome-icon-theme (>= 2.16) but 3.6.0-0ubuntu2 is to be installed I should note that the banshee application appears three times when searching for it: http://i.imgur.com/fJOsb.png Other applications install fine though. I installed the latest updates and still received the same error. I even tried reinstalling Ubuntu, but the same thing happened.

    Read the article

  • Network topology question

    - by Asbie
    We currently have three networks, X.X.163.1, X.X.93.1 and 192.168.1.1. Today's setup is like this: http://i.imgur.com/tkKWy.jpg We now have PPT VPN from internet to the X.X.163.1-network, but really need to access the files from the File Server through VPN. I am also aware that this setup is not optimal. So please, any advices on how to redesign our network? Rack servers are mostly web and db servers, with only public IP addresses.

    Read the article

  • Texture and Pattern Generator

    - by Ara
    I use Adobe Fireworks for its Texture and Pattern tools to make things like this: http://i.imgur.com/sci7Roc.png and then i copy-paste it to Flash Professional (Adobe) to use there. but fireworks is so slow and buggy is there a free or commercial software to do this simple Texture / Pattern thing easily? Texture (like the second image above) Patter and Texture (like the first one) Transparent Texture, so the background color would be visible instead of the white lines in second image The ability to copy and paste it (as PNG 32 or any alpha transparent image) so i don't have to save it first and then import it to flash * I Use Mac OS X 10.8.4 *

    Read the article

  • Get source and destination of outbound traffic in pfSense

    - by maxsilver
    I'm looking at the traffic graph in pfSense (Version 1.2.2), which we're using as a router / NAT / ect on our network. Recently, I'm seeing a sudden, constant spike of 15 - 30kbps traffic outbound, that is unusual for our network (normally its below 2kbps, we're mostly all inbound traffic) Is there any way to determine what the source of this traffic is, or where it's going? (Just an internal IP address for source, and external IP address for destination would be all I need) I've already tried switching the traffic graph to 'LAN' and watching the host list on the right side, but it seems ... flakey. The numbers it shows seem to fade in and out at random, and the values never add up to anywhere near the graph values. I'm not allowed to post the image, but a photo is available at - http://imgur.com/QYjKI.png

    Read the article

  • how to make HLSL effect just for lighning without texture mapping?

    - by naprox
    I'm new to XNA, i created an effect and just want to use lightning but in default effect that XNA create we should do texture mapping or the model appears 'RED', because of this lines of code in the effect file: float4 PixelShaderFunction(VertexShaderOutput input) : COLOR0 { float4 output = float4(1,0,0,1); return output; } and if i want to see my model (appear like when i use basiceffect) must do texture mapping by UV coordinates. but my model does not have UV coordinates assigned or its UV coordinates is not exported. and if i do texture mapping i got error. (i do texture mapping by this line of code in vertexshaderfunction and other necessary codes) output.UV= input.UV i have many of this models and want to work with them.(my models are in .FBX format) when i use Bassiceffect i have no problem and model appears correctly. how can i use "just" lightnings in my custom effects? and don't do texture mapping (because i have no UV coordinates in my models) and my model be look like when i use BasicEffect? if you need my complete code Here it is: http://www.mediafire.com/?4jexhd4ulm2icm2 here is inside of my Model Using BasicEffect http://i.imgur.com/ygP2h.jpg?1 and this is my code for drawing with or without BasicEffect inside of my draw() method: Matrix baseWorld = Matrix.CreateScale(Scale) * Matrix.CreateFromYawPitchRoll(Rotation.Y, Rotation.X, Rotation.Z) * Matrix.CreateTranslation(Position); foreach(ModelMesh mesh in Model.Meshes) { Matrix localWorld = ModelTransforms[mesh.ParentBone.Index] * baseWorld; foreach(ModelMeshPart part in mesh.MeshParts) { Effect effect = part.Effect; if (effect is BasicEffect) { ((BasicEffect)effect).World = localWorld; ((BasicEffect)effect).View = View; ((BasicEffect)effect).Projection = Projection; ((BasicEffect)effect).EnableDefaultLighting(); } else { setEffectParameter(effect, "World", localWorld); setEffectParameter(effect, "View", View); setEffectParameter(effect, "Projection", Projection); setEffectParameter(effect, "CameraPosition", CameraPosition); } } mesh.Draw(); } setEffectParameter is another method that sets effect parameter if i use my custom effect.

    Read the article

  • Resizing partition using Gparted gives "can't have overlapping partitions" error

    - by Marcus
    I just decided to install Ubuntu 12.04 alongside Windows 7 on my Dell laptop. However I didn't do this manually but instead used the "Run Ubuntu alongside Windows 7" option upon installation, and now the partition that Ubuntu runs on has very little space (It's giving me warnings). I'm trying to use Gparted 0.12.1-5 (via a live CD) to give Windows less space and give Ubuntu more. I've managed to remove 100GB from the Windows partition so I now have some unallocated space between Windows and Ubuntu. This is what it looks like inside Ubuntu (not using the live CD, since it won't let me mount a USB to save a screenshot): http://i.stack.imgur.com/0keQq.png So first I take sda4 (extended?) and resize it to the left so it takes up all the unallocated space. Then I resize sda5 (ext4) as well so it takes up all the new space. However, when I hit apply, it fails on the first action (resizing sd4), saying "can't have overlapping partitions". Any ideas as to why this happens? I also tried resizing sda4 by just a few MB so that it definitely didn't overlap anything, but I still got the same error message. To clarify, I am doing it using the CD, I just took the screenshot from Ubuntu. Any help would be greatly appreciated! And again, I can't mount any USB (I'm following the guide on the gparted website but it says "Invalid argument" or something like that) so I couldn't attach the details file from Gparted. If this is needed, I may need some hints on how to solve the USB issue as well. :) Thanks

    Read the article

  • Revo 3610 not doing hdmi handshake

    - by DoomStone
    I am having a problem with my Revo 3610 witch is connected to my tv via hdmi. For some reason will it not do the hdmi handshake with the tv, so my tv does not think that there are anything in the hdmi port. I have tested the tv and it works find, with my laptop and dvd. It dose work some times, but this time have it failed for 2 days in a row, and i have tried rebooting, turning the tv off and on, and so on nothing helps. I can trick the TV to listen to the HDMI with connecting with my laptop and then change the hdmi back to my revo, this on the other hand results in the image going thoug nicely but there are a big fat "Check signal cable." on the screen. I have also tryed changing the resolution in the revo but this dose not help ether. Have any one had this problem before, and if so how did you fix it? Example: http://i.imgur.com/gguZ4.jpg

    Read the article

  • I want to upgrade my GPU to MSI NVIDIA N630GT-MD4GD3 4 GB DDR3 Graphic card

    - by jatin singh
    Hello every body this is my first post here.. I want to know about my motherboard's PCI express version , my motherboard as I don't have 10 reputation so I am providing image link here http://i.stack.imgur.com/6PWV9.png I have PCI express slot and I want to upgrade it to MSI NVIDIA N630GT-MD4GD3 4 GB DDR3 Graphic card.. this GPU has PCI exp version 2. Here in my city,the shopkeeper said that we have to check if the PCI express of my board is compatible to that GPU but I want to purchase it from flipkart because they sell it for less money (sorry for bad English :/) I mailed to my computers company (Acer) but they didn't reply to any of my mail so my friend told me about Super User.

    Read the article

  • Keep 3d model facing the camera at all angles

    - by Sparky41
    I'm trying to keep a 3d plane facing the camera at all angles but while i have some success with this: Vector3 gunToCam = cam.cameraPosition - getWorld.Translation; Vector3 beamRight = Vector3.Cross(torpDirection, gunToCam); beamRight.Normalize(); Vector3 beamUp = Vector3.Cross(beamRight, torpDirection); shipeffect.beamWorld = Matrix.Identity; shipeffect.beamWorld.Forward = (torpDirection) * 1f; shipeffect.beamWorld.Right = beamRight; shipeffect.beamWorld.Up = beamUp; shipeffect.beamWorld.Translation = shipeffect.beamPosition; *Note: Logic not wrote by me i just found this rather useful It seems to only face the camera at certain angles. For example if i place the camera behind the plane you can see it that only Roll's around the axis like this: http://i.imgur.com/FOKLx.png (imagine if you are looking from behind where you have fired from. Any idea what to what the problem is (angles are not my specialty) shipeffect is an object that holds this class variables: public Texture2D altBeam; public Model beam; public Matrix beamWorld; public Matrix[] gunTransforms; public Vector3 beamPosition;

    Read the article

  • Facebook unresponsive in Chrome, pepper flash disabled

    - by Mike Pateras
    Facebook becomes unresponsive after a second or two when I open Chrome. This problem happens every few weeks or so, and it's incredibly annoying. I've disabled Chrome's internal pepper flash: http://imgur.com/8hlqvaX I've also tried disabling all extensions, and even tried it in incognito mode. Facebook works just fine in Firefox, but it's totally unusable in Chrome. The problem goes away eventually, but it returns every now and then and it's super annoying. Chrome version: 30.0.1599.101 (Official Build 227552) m How can I fix this?

    Read the article

  • pfsense CARP - wan failure on firewall

    - by eldblz
    I have recently configured 2 firewall (on 2 DELL PowerEdge R210II with ESXI 5.1) with pfsense. We have several LANs and 2 WANs. Everything is running fine but i have a strange behavior: i can access internet from alla LANs but not from the firewall (itself). For example the firewall cannot retrive package information or if i setup a gatway monitor ip (like google 8.8.8.8 ) this fails. These are the screenshots of firewall configuration: http://imgur.com/a/LNuMz#0 ATM i kept firewall rules to minimum to avoid problem or conflicts. Any ideas how to solve the problem? Thank you in advance.

    Read the article

  • Broke Ubuntu 12.04 either with Screencloud or Ubuntu Tweak

    - by pgrytdal
    Earlier today I installed the Screen Shot app "Screencloud" and after the installation Firefox was having problems. I didn't think much about it, just closed Firefox, then proceeded to change the toolbar opacity on Ubuntu Tweak. After restarting my system, hoping it would fix Firefox (because, you know, restarting fixes everything ;) ) I am able to go to the Log In Screen, type in my password, but then I get 3 errors regarding the Screencloud Ubuntu One, Imgur, and Dropbox plugins. After clicking the "Okay" on all three errors, all I see is my wallpaper. I am not able to access the terminal VIA CtrlAltT, but I am able to log out VIA CtrlAltDelete. I have tried all desktop environments I have installed (that, except for Unity 2D, has to do with Cairo Dock.) I hope I have provided enough information. If you need more, please ask. Please help! I would like to not have to re-install Ubuntu. Other info: OS: Ubuntu 12.04 I also have a Ubuntu 12.10 Live USB, but Ubuntu 12.10 hasn't run very well on any of my computers.

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >