Search Results

Search found 356 results on 15 pages for 'uncheck'.

Page 10/15 | < Previous Page | 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • What is hiberfil.sys and How Do I Delete It?

    - by The Geek
    You’re no doubt reading this article because there’s a gigantic hiberfil.sys file sitting in the root of your drive, and you want to get rid of it to free up some space… but you can’t! Luckily, you actually can delete it, and today we’ll show you how. The more memory you have in your PC, the bigger the file will be. So What is hiberfil.sys Anyway? Windows has two power management modes that you can choose from: one is Sleep Mode, which keeps the PC running in a low power state so you can almost instantly get back to what you were working on. The other is Hibernate mode, which completely writes the memory out to the hard drive, and then powers the PC down entirely, so you can even take the battery out, put it back in, start back up, and be right back where you were. Hibernate mode uses the hiberfil.sys file to store the the current state (memory) of the PC, and since it’s managed by Windows, you can’t delete the file. So if you never use it, and want to disable Hibernate mode, keep reading. Personally I stick with Sleep Mode the vast majority of the time, but I do use Hibernate quite often. Disable Hibernate (and Delete hiberfil.sys) in Windows 7 or Vista You’ll need to open an administrator mode command prompt by right-clicking on the command prompt in the start menu, and then choosing Run as Administrator. Once you’re there, type in the following command: powercfg -h off You should immediately notice that the Hibernate option is gone from the Shut down menu. You’ll also notice that the file is magically gone! For more about dealing with Hibernate like setting how long it takes to head into Hibernate mode, you can check out our article on How to Manage Hibernate Mode in Windows 7. Disabling Hibernate Mode in Windows XP It’s a lot easier in Windows XP to get rid of Hibernate mode… in fact, we’ve already covered it before, but we’ll cover it again. Just head into Control Panel –> Power Options, and then find the Hibernate tab. Uncheck the box, reboot your PC, and then you can delete the hiberfil.sys file. Similar Articles Productive Geek Tips How to Delete a System File in Windows 7 or VistaDisable Delete Confirmation Dialog in Windows 7 or VistaClear IE7 Browsing History From the Command LineHide, Delete, or Destroy the Recycle Bin Icon in Windows 7 or VistaClear the Auto-Complete Email Address Cache in Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides

    Read the article

  • Interpreting Inkscape SVG path coordinates for HTML map

    - by tovare
    I needed some coordinates for a HTML MAP and tried to use inkskape by opening the image and just draw a path with my polygon coordinates. My document properties are set to 256 x 256 pixels and units: px When opening the svg file i get coordinates which are not immediately apparent. <path style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:butt; stroke-linejoin:miter;stroke-opacity:1" d="m 23.864407,126.91525 3.254237, 44.47458 35.79661, 44.47458 71.593216, 19.52542 71.59322, -37.9661 22.77967, -72.67797 L 218.0339, 64 192,49.898305 l -32.54237, 8.677966 -18.44068, -35.79661 1.08474, -17.3559322 -71.593215,0 L 45.559322,34.711864 35. 79661,57.491525 5.4237288, 74.847458 6.5084746,101.9661 23.864407,126.91525 z" id="path2840" /> How can I get coordinates I can use ? The original image The SVG file from inkscape Link to SVG Progress: I tried a tool called InkscapeMap which looks promising and simple, but unfortunately it looks like it didn't work with this particular svn file. Solved! Saving the file as a Plain SVG solved the problem and InkscapeMap worked perfectly. (Btw. saving as an optimized svg caused a parsing error) Update 13.11 Using inkscapeMap 0.6 and Inkscape 0.48 i needed to uncheck relative coordinates in SVG output preferences. Also if you get a C error message, hunt down the polygon with a C in it, and redraw the polygon using the XML editor in inkscape. Update 25.11.2011 I modified the source to improve parsing. http://tovare.com/articles/createhtmlimagemapsusinginkscape/

    Read the article

  • Outlook 2007 "Mark as Not Junk" Dialog Confusion

    - by David
    Outlook 2007's "Not Junk" button opens the "Mark as Not Junk" dialog. The dialog works correctly if I keep the "Always trust e-mail from <email address>" option checked. That is, the message is removed from the Junk folder and returns to the Inbox. However, if I uncheck the "Always trust" box, pressing OK dismisses the dialog, but nothing else happens. Why not? According to Outlook help, "When you mark a message as not junk, you are given the option of adding the sender or the mailing list name to your Safe Senders List or Safe Recipients List." That sure makes it sound like this is just an option, and not necessary for the core functionality of the action. I really don't want to trust a (possibly forged) From: address, but I do want my mail back in the Inbox. I could manually drag it, but I'm assuming that marking a message as not junk also trains some kind of bayesian filter. Am I mistaken? Thanks.

    Read the article

  • Outlook 2007 "Mark as Not Junk" Dialog Confusion

    - by David
    Outlook 2007's "Not Junk" button opens the "Mark as Not Junk" dialog. The dialog works correctly if I keep the "Always trust e-mail from <email address>" option checked. That is, the message is removed from the Junk folder and returns to the Inbox. However, if I uncheck the "Always trust" box, pressing OK dismisses the dialog, but nothing else happens. Why not? According to Outlook help, "When you mark a message as not junk, you are given the option of adding the sender or the mailing list name to your Safe Senders List or Safe Recipients List." That sure makes it sound like this is just an option, and not necessary for the core functionality of the action. I really don't want to trust a (possibly forged) From: address, but I do want my mail back in the Inbox. I could manually drag it, but I'm assuming that marking a message as not junk also trains some kind of bayesian filter. Am I mistaken? Thanks.

    Read the article

  • Using URL rewrite module for http to https redirect

    - by johnnyb10
    Following ruslany's suggestion on the URL Rewrite Tips page here, I'm trying to use URL Rewrite to redirect http:// requests for my site to https://. I've written and tested the rule using a test site I set up, and so now the final piece is to create a second site (http) to redirect to my https site. (I need to use a second site because I don't want to uncheck the "Require SSL encryption" checkbox on my existing site.) I'm an IIS newbie so my question is: how do I do this? Should I create a site with the same name and host header, only it will be bound to http? Will IIS let me create a site with the same name? I don't want to screw anything up with my existing site (which is a SharePoint site, currently used by external users). That site currently has http and https bound to it. So my assumption is that, using ISS (not SharePoint), I will create a new site (http only) with the same name and host header as my existing site, and add the URL Rewrite rule to the http site. And then I guess I should remove the http binding from my existing site? Does that seem correct? Any advice, gotchas, etc., would be appreciated. Thanks.

    Read the article

  • Using URL rewrite module for http to https redirect

    - by johnnyb10
    Following ruslany's suggestion on the URL Rewrite Tips page here, I'm trying to use URL Rewrite to redirect http:// requests for my site to https://. I've written and tested the rule using a test site I set up, and so now the final piece is to create a second site (http) to redirect to my https site. (I need to use a second site because I don't want to uncheck the "Require SSL encryption" checkbox on my existing site.) I'm an IIS newbie so my question is: how do I do this? Should I create a site with the same name and host header, only it will be bound to http? Will IIS let me create a site with the same name? I don't want to screw anything up with my existing site (which is a SharePoint site, currently used by external users). That site currently has http and https bound to it. So my assumption is that, using ISS (not SharePoint), I will create a new site (http only) with the same name and host header as my existing site, and add the URL Rewrite rule to the http site. And then I guess I should remove the http binding from my existing site? Does that seem correct? Any advice, gotchas, etc., would be appreciated. Thanks.

    Read the article

  • Virtual Machine Network Services causes networking problems in Vista Enterprise 64 bit install

    - by Bill
    I have a Quad-core/8GB Vista Enterprise 64-bit (SP2) installation on which I installed Virtual PC 2007. I have a problem that is opposite of all that I found searching around the Internet--everybody has problems making network connections from their guest VM. When Virtual Machine Network Services is enabled in the protocol stack for my network card across a reboot, it causes access problems to the network. The amount of time to login in using a domain credentialed account is upwards of 3 minutes, then after reaching the desktop the network and sharing center shows that my connection to the domain is unauthenticated. Disabling and re-enabling the Virtual Machine Network Services (uncheck in network properties/apply/recheck/apply) fixes the problem. And as long as I have the VMNS disabled when I shutdown the restart runs smoothly. I just have to remember to enable after login and disable before shutdown. I have un-installed and re-installed Virtual PC 2007 multiple times with restarts between. The install consists of the SP1 + a KB patch for guest resolution fix. Any help would be greatly appreciated. Some additional information... At one point during my hairpulling and teethgnashing with this, I tried to ping my primary DC and observed some weird responses: (Our DC is 10.10.10.25, my dynamic IP was 10.10.10.203) Reply from 10.10.10.203, Destination host unreachable. Request timed out. Reply from 10.10.10.25: ... This is not consistently repeatable, but thought it might strike a chord with someone.

    Read the article

  • Wake-on-lan only works so many times

    - by Chance
    I have Wake-on-lan configured on my Windows XP machine so that the computer will wake up from Standby. Waking the computer from Standby via network traffic seems to work a certain number of times, say 4 or 5, then it stops working. If I restart the computer it seems to reset this behavior so that I can use WOL a few more times before it starts working. I use the command "wol" on my other, Linux machine with the appropriate IP address and MAC address of the card. I looked at the network card to see if it had different lights when WOL worked and when it didn't. When it has a solid amber light where the ethernet cable connects, WOL seems to work. When it has a flashing amber light, WOL does not. It seems that the system seems to almost "shut off" the card when it falls to sleep, but I don't know if this is a function of time or number of standby/wakeups. I have a 3Com 3c920 network card. If I look at the properties in Device Manager, I have "Allow this Device to bring the Computer out of Standby" checked. In the Advanced tab I have anything related to RWU (Remote Wake Up) enabled. I also believe I have the appropriate settings in BIOS related to Remote Wake-Up and I have tried both S1 and S3 power configurations in the BIOS. Intuitively, I would think I would uncheck "Allow the Computer to turn off this device to save power", but doing so disables the "Allow this Device to bring the Computer out of Standby" option. Does anyone know what is happening here or if there is a way to fix it? I have an integrated network card; would getting one that goes into a slot be better? I am running Windows XP on a Dell Optiplex GX240 with a 3Com 3c920 network card.

    Read the article

  • Why can't I get out of display mirror mode?

    - by Roy Smith
    I've been running Ubuntu (10.04.1 LTS, 64-bit) for a while and just replaced my hardware with a faster machine with an ATI Radeon HD 5700 video card. I've got twin 1920 x 1080 displays. I downloaded the latest driver (ati-driver-installer-10-9-x86.x86_64.run) from the ATI web site and installed that. I've gone through a few rounds of playing with /etc/X11/xorg.conf, and can't get things right. At the moment, it's in display mirroring mode, and I can't figure out how to get it out of mirror mode. If I run Monitor Preferences, there's a "Same image in all monitors" checkbox. If I uncheck that, the little preview window switches to show two monitors. When I click Apply, it asks me to log out and log back in again. When I do that, I'm right back to mirrored mode. What's really weird is that I'm currently running a copy of xorg.conf from a coworker's machine. He's got identical hardware, and his display works fine. So, I'm inclined to think there's something else going on other than the conf file. Any ideas what might be wrong?

    Read the article

  • Hyper-V with multiple physical networks

    - by Yaman
    I have Hyper-V on my laptop with a wireless and Ethernet card, sometimes I connect using wireless card, and sometimes using the Ethernet cable. I am trying to configure Hyper-v to work always with internet provided to virtual machine. I have tried to create 2 virtual switches, one external to the Wireless network card, and the other one external to the Ethernet card. What happens is that the wireless network creates a bridge object in the network and sharing center\Network connections of windows 8, while the Ethernet does not. Unfortunately, they do not work together as external, i have to set the connected one to external and the other one as external, I also have to go to the properties of the bridge and virtual Ethernet properties to uncheck and check some components like: Client for Microsoft Networks Deterministic Network Enhancer VMWare Bridge Protocol QoS Packet Scheduler File and Printer Sharing for Microsoft Networks In order to make things work. Sometimes I keep the wireless network switch external, and go to another location (another wireless network), and it disconnects, i have to reconfigure the switches. Is there a way to do the configuration once and remain working wherever I connect, whether its Wireless or Ethernet and on any network with DHCP?

    Read the article

  • pptp server 2003 hands out gateway from nic not dhcp server

    - by Pete
    I have created a pptp RRAS server for a handful of clients to connect to. I would like them to use the servers default gateway (.1) for internet access. They are able to successfully connect (& see LAN) but it then cuts them off the internet. I understand that all internet traffic would be routed through the pptp server but that's ok since I have enough pipe. The problem seems to be that: the clients gateway shows as their assigned RAS ip. The clients assigned DNS settings seem to be what is set to the servers nic not what I have specified in dhcp (which is the same server). DHCP relay agent properties points to the nic DHCP is running on (192.168.100.163). .1 is gateway in nic hw properties & dhcp. I have different dns secondary & third entries on my nic properties than what dhcp is configured for. The problem is that I have a 10.10.1.x network that people can not see if they uncheck the gateway option but, they are then unable to see our other hosted sites on the internet.

    Read the article

  • Windows 7 Taskbar Icons Randomly Disappearing

    - by Ryker
    This is a problem that i'm totally stumped on. Taskbar Icons that are pinned, as well as open program thumbs keep disappearing. This is totally random, no set pattern. I've tried updating drivers for the vid card, rolling back to old drivers, nothing seems to work. I've also tried the usual uncheck hide the taskbar and recheck, changing the start menu, keeping commonly used programs in start menu, etc. This is using an add-in card which is a necessity. Here is the specs on the machine: New Dell Optiplex 390 i3 2100 Proc 3gb Ram, Windows 7 32-bit. The add in card is an Nvidia 8400 GS model. I've tried different versions of the 8400gs, from MSI, or from other manufactureres and regardless it keeps happening. After the Icons disappear, I can log out and log back in and they return, but disappear again. I can reinstall the drivers for the vid card and it fixes it for a few days, and then they disappear again. There isn't any set pattern of days that it happens, software being used, etc. Another user in the office had the same problem with the exact same machine, but updating the vid card drivers fixed the issue. Anyone?

    Read the article

  • Control to Control Binding in WPF/Silverlight

    - by psheriff
    In the past if you had two controls that you needed to work together, you would have to write code. For example, if you want a label control to display any text a user typed into a text box you would write code to do that. If you want turn off a set of controls when a user checks a check box, you would also have to write code. However, with XAML, these operations become very easy to do. Bind Text Box to Text Block As a basic example of this functionality, let’s bind a TextBlock control to a TextBox. When the user types into a TextBox the value typed in will show up in the TextBlock control as well. To try this out, create a new Silverlight or WPF application in Visual Studio. On the main window or user control type in the following XAML. <StackPanel>  <TextBox Margin="10" x:Name="txtData" />  <TextBlock Margin="10"              Text="{Binding ElementName=txtData,                             Path=Text}" /></StackPanel> Now run the application and type into the TextBox control. As you type you will see the data you type also appear in the TextBlock control. The {Binding} markup extension is responsible for this behavior. You set the ElementName attribute of the Binding markup to the name of the control that you wish to bind to. You then set the Path attribute to the name of the property of that control you wish to bind to. That’s all there is to it! Bind the IsEnabled Property Now let’s apply this concept to something that you might use in a business application. Consider the following two screen shots. The idea is that if the Add Benefits check box is un-checked, then the IsEnabled property of the three “Benefits” check boxes will be set to false (Figure 1). If the Add Benefits check box is checked, then the IsEnabled property of the “Benefits” check boxes will be set to true (Figure 2). Figure 1: Uncheck Add Benefits and the Benefits will be disabled. Figure 2: Check Add Benefits and the Benefits will be enabled. To accomplish this, you would write XAML to bind to each of the check boxes in the “Benefits To Add” section to the check box named chkBenefits. Below is a fragment of the XAML code that would be used. <CheckBox x:Name="chkBenefits" /> <CheckBox Content="401k"           IsEnabled="{Binding ElementName=chkBenefits,                               Path=IsChecked}" /> Since the IsEnabled property is a boolean type and the IsChecked property is also a boolean type, you can bind these two together. If they were different types, or if you needed them to set the IsEnabled property to the inverse of the IsChecked property then you would need to use a ValueConverter class. SummaryOnce you understand the basics of data binding in XAML, you can eliminate a lot code. Connecting controls together is as easy as just setting the ElementName and Path properties of the Binding markup extension. NOTE: You can download the complete sample code at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "SL – Basic Control Binding" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free eBook on "Fundamentals of N-Tier".

    Read the article

  • The Mysterious ARR Server Farm to URL Rewrite link

    - by OWScott
    Application Request Routing (ARR) is a reverse proxy plug-in for IIS7+ that does many things, including functioning as a load balancer.  For this post, I’m assuming that you already have an understanding of ARR.  Today I wanted to find out how the mysterious link between ARR and URL Rewrite is maintained.  Let me explain… ARR is unique in that it doesn’t work by itself.  It sits on top of IIS7 and uses URL Rewrite.  As a result, ARR depends on URL Rewrite to ‘catch’ the traffic and redirect it to an ARR Server Farm. As the last step of creating a new Server Farm, ARR will prompt you with the following: If you accept the prompt, it will create a URL Rewrite rule for you.  If you say ‘No’, then you’re on your own to create a URL Rewrite rule. When you say ‘Yes’, the Server Farm’s checkbox for “Use URL Rewrite to inspect incoming requests” will be checked.  See the following screenshot. However, I’m not a fan of this auto-rule.  The problem is that if I make any changes to the URL Rewrite rule, which I always do, and then make the wrong change in ARR, it will blow away my settings.  So, I prefer to create my own rule and manage it myself. Since I had some old rules that were managed by ARR, I wanted to update them so that they were no longer managed that way.  I took a look at a config in applicationHost.config to try to find out what property would bind the two together.  I assumed that there would be a property on the ServerFarm called something like urlRewriteRuleName that would serve as the link between ARR and URL Rewrite.  I found no such property.  After a bit of testing, I found that the name of the URL Rewrite rule is the only link between ARR and URL Rewrite.  I wouldn’t have guessed.  The URL Rewrite rule needs to be exactly ARR_{ServerFarm Name}_loadBalance, although it’s not case sensitive. Consider the following auto-created URL Rewrite rule: And, the link between ARR and URL Rewrite exists: Now, as soon as I rename that to anything else, for example, site.com ARR Binding, the link between ARR and URL Rewrite is broken. To be certain of the relationship, I renamed it back again and sure enough, the relationship was reestablished. Why is this important?  It’s only important if you want to decouple the relationship between ARR the URL Rewrite rule, but if you want to do so, the best way to do that is to rename the URL Rewrite rule.  If you uncheck the “Use URL Rewrite to inspect incoming requests” checkbox, it will delete your rule for you without prompting.  Conclusion The mysterious link between ARR and URL Rewrite only exists through the ARR Rule name.  If you want to break the link, simply rename the URL Rewrite rule.  It’s completely safe to do so, and, in my opinion, this is a rule that you should manage yourself anyway. 

    Read the article

  • Make Your PC Look Like Windows Phone 7

    - by Matthew Guay
    Windows Phone 7 offers a unique and exciting UI that displays lots of information efficiently on the screen.  And with a simple Rainmeter theme, you can have the same UI and content directly on your Windows 7 desktop. Turn your Desktop into a Windows Phone 7 lookalike To give your Windows 7 desktop a Windows Phone 7 makeover, first you need to have the free Rainmeter application installed.  If you do not have it installed, download it from the link below and run the setup.  Accept the license agreement, and install it with the default settings. By default Rainmeter will automatically run when you start your computer.  If you do not want this, you can uncheck the box during the setup. Now, download the Omnimo UI theme for Rainmeter (link below).  You will need to unzip the folder first. This theme uses the Segoe UI and the Segoe UI Light font, so Windows Vista users need to install the segoeuil.ttf font first, and XP users need to install both the segoeui.ttf and the segoeuil.ttf font first.  Copy the appropriate fonts to C:\Windows\Fonts, or in Vista double-click on the font and select Install. Now, run the Rainmeter theme setup.  Double-click on the Rainstaller.exe in the Omnimo folder. Click Express install to add the theme and skin to Rainmeter. Click Finish, and by default Rainmeter will open with your new theme. When the new theme opens the first time, you will be asked to read the readme, or simply go to the gallery. When you open the gallery, you can choose from a wide variety of tiles and gadgets to place on your desktop.  You can also choose a different color scheme for your tiles. Once you’re done, click the X in the top right hand corner to close the Gallery.  Welcome to your Windows Phone 7 desktop!  Many of the gadgets are dynamic, and you can change the settings for most of them.  The only thing missing is the transition animations that Windows Phone 7 shows when you launch an application. To make it look even more like Windows Phone 7, you can change your background to black.  This makes the desktop theme really dramatic. And, if you want to add gadgets or change the color scheme, simply click on the + logo on the top. Windows Phone 7 Desktop Wallpapers If you’d prefer to simply change your background, My Microsoft Life has several very nice Windows Phone 7 wallpapers available for free.  Click the link below to download these and other Microsoft-centric wallpapers. If you can’t wait to get the new Windows phone 7, this is a great way to start experiencing the beauty of the phone UI on your desktop. Links Download Rainmeter Download the Omnimo UI Rainmeter theme Download Windows Phone 7 inspired wallpapers Similar Articles Productive Geek Tips Try out Windows Phone 7 on your PC todayTest All Features of Windows Phone 7 On Your PCHow-To Geek on Lifehacker: How to Make Windows Vista Less AnnoyingCreate a Shortcut or Hotkey to Mute the System Volume in WindowsMake Ubuntu Automatically Save Changes to Your Session TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Norwegian Life If Web Browsers Were Modes of Transportation Google Translate (for animals) Roadkill’s Scan Port scans for open ports Out of 100 Tweeters Out of band Security Update for Internet Explorer

    Read the article

  • Easily Add Facebook Chat to Pidgin

    - by Matthew Guay
    Want to keep in touch with your Facebook friends throughout the day?  Here we’ll show you how to easily add Facebook chat to the popular multi-protocol chat client Pidgin. Facebook has recently added support for XMPP chat, which means you can easily add it to popular chat clients such as Pidgin.  Previously you could only add Facebook chat to Pidgin through a plug-in that didn’t always work correctly.  Here we’ll walk you through setting up your Facebook account in Pidgin. Getting Started First, make sure you have a username for your Facebook account (link below).  This is a relatively new feature for Facebook, so if you’ve had your account for a while you may need to choose one.    If you already have one, you should see it listed instead. Now, open Pidgin, and click Manage Accounts. Click Add… Then select XMPP from the Protocol list. Now, enter your Facebook username without the facebook.com part (e.g your.facebook.username, not http://www.facebook.com/your.user.name).  Then, enter chat.facebook.com for the Domain, and enter your standard Facebook password.  You can check the “Remember password” box if you’d like Pidgin to automatically sign in to Facebook chat. Now, click on the Advanced tab, and uncheck the “Require SSL/TLS” box.  Also, make sure the Connect port is 5222.  Click Add, and your Facebook account is added to Pidgin. Now Facebook will show up in your list of accounts, with the username [email protected]. Your Facebook friends will show up directly in your Buddy list, complete with their full name and Facebook profile picture.  Any users that are not in a group will show under your standard list, while ones in a Facebook group will be shown in a separate group.  You can move which groups your Facebook friends show up in, just like you can with other chat contacts.   And no matter if your friend is logged in on the standard Facebook website or through another chat application, it will work the same as always.   This is a great way to keep in touch with your Facebook friends throughout the day.  If you like Facebook chat and already use Pidgin, now you can keep from switching between programs and just chat with all your friends from a central location. Links: Download Pidgin Set your Facebook username Similar Articles Productive Geek Tips The How-To Geek is No Longer on FacebookWin a Free iPod Touch in the How-To Geek Facebook Giveaway!Block Those Irritating Facebook Quiz & Application MessagesPut Your Pidgin Buddy List into the Windows Vista SidebarHow to Lock Down Your Facebook Account TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

    Read the article

  • Beginner Geek: How to Burn an ISO Image to a Disc

    - by Mysticgeek
    There may be a time when you have an ISO image that you need to burn to a CD or DVD for use in a computer or other device. Today we show you how to do it using ImgBurn, ISO Recorder, and Windows Disc Image Burner in Windows 7. You might need to burn an ISO of an operating system, software app, CD, DVD…etc. It doesn’t matter what the ISO image is, burning an image is a fairly straight-forward process and here we’ll take a look at three free options to accomplish it. Using ImgBurn ImgBurn is an awesome free utility that will create ISO images, allow out burn almost anything, and a lot more. Although there are a lot advanced features available, burning an ISO to disc is easy. Download and install ImgBurn (link below) taking the defaults in the install wizard. The main thing to watch for and uncheck during installation is when it offers the worthless Ask Toolbar. The easiest way to use ImgBurn is to burn an image to disc is pop in a blank disc to the CD/DVD drive, right-click on the ISO file, and select Burn using ImgBurn. ImgBurn opens up with the source and destination fields already filled in. You can leave the default settings, then click the Write button. You’ll notice that the ImgBurn Log screen opens, this is by default and is meant to show error messages you may receive during the writing process.   A successful burn! That is all there is to it…click Ok and close out of ImgBurn. Use ISO Recorder ISO Recorder (link below) is another great utility for burning ISO images to disc. They have a version for XP, Vista, and Windows 7 (32 & 64-bit Versions). Pop your blank disc into your CD/DVD drive and right-click on the ISO image file and select Copy image to CD from the Context Menu. In the next screen the image file path is in the Source Image file field. Under Recorder select the drive with your blank disc, select a recording speed and click Next. You’ll see a progress screen while the data is written to the disc and finalizing… That’s it! Your disc will pop out and you can click Finish to close out of ISO Recorder. Use Windows 7 If You’re using Windows 7, use the built in Windows Disc Image Burner feature to burn ISO images to disc. The process is very straight-forward, and for a full walkthrough on this, check out our article on how to burn an ISO image in Windows 7. Conclusion You don’t need an expensive commercial application to burn an ISO image to disc. Using any one of these free utilities will get the job done quite nicely. Download ImgBurn Download ISO Recorder Similar Articles Productive Geek Tips How to Make a Windows Vista Repair Disk If You Don’t Have OneHow to Create a Windows ISO from a Disc Using ImgBurnEasily Burn Discs With BurnAware Free EditionCreate A Windows Home Server Home Computer Restore DiscWhy is Amarok’s "Burn This Album" Disabled in Ubuntu? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Google Translate (for animals) Out of 100 Tweeters Roadkill’s Scan Port scans for open ports Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows If it were only this easy

    Read the article

  • AutoFit in PowerPoint: Turn it OFF

    - by Daniel Moth
    Once a feature has shipped, it is very hard to eliminate it from the next release. If I was in charge of the PowerPoint product, I would not hesitate for a second to remove the dreadful AutoFit feature. Fortunately, AutoFit can be turned off on a slide-by-slide basis and, even better, globally: go to the PowerPoint "Options" and under "Proofing" find the "AutoCorrect Options…" button which brings up the dialog where you need to uncheck the last two checkboxes (see the screenshot to the right). AutoFit is the ability for the user to keep hitting the Enter key as they type more and more text into a slide and it magically still fits, by shrinking the space between the lines and then the text font size. It is the root of all slide evil. It encourages people to think of a slide as a Word document (which may be your goal, if you are presenting to execs in Microsoft, but that is a different story). AutoFit is the reason you fall asleep in presentations. AutoFit causes too much text to appear on a slide which by extension causes the following: When the slide appears, the text is so small so it is not readable by everyone in the audience. They dismiss the presenter as someone who does not care for them and then they stop paying attention. If the text is readable, but it is too much (hence the AutoFit feature kicked in when the slide was authored), the audience is busy reading the slide and not paying attention to the presenter. Humans can either listen well or read well at the same time, so when they are done reading they now feel that they missed whatever the speaker was saying. So they "switch off" for the rest of the slide until the next slide kicks in, which is the natural point for them to pick up paying attention again. Every slide ends up with different sized text. The less visual consistency between slides, the more your presentation feels unprofessional. You can do better than dismiss the (subconscious) negative effect a deck with inconsistent slides has on an audience. In contrast, the absence of AutoFit Leads to consistency among all slides in a deck with regards to amount of text and size of said text. Ensures the text is readable by everyone in the audience (presuming the PowerPoint template is designed for the room where the presentation is delivered). Encourages the presenter to create slides with the minimum necessary text to help the audience understand the basic structure, flow, and key points of the presentation. The "meat" of the presentation is delivered verbally by the presenter themselves, which is why they are in the room in the first place. Following on from the previous point, the audience can at a quick glance consume the text on the slide when it appears and then concentrate entirely on the presenter and what they have to say. You could argue that everything above has nothing to do with the AutoFit feature and all to do with the advice to keep slide content short. You would be right, but the on-by-default AutoFit feature is the one that stops most people from seeing and embracing that truth. In other words, the slides are the tool that aids the presenter in delivering their message, instead of the presenter being the tool that advances the slides which hold the message. To get there, embrace terse slides: the first step is to turn off this horrible feature (that was probably introduced due to the misuse of this tool within Microsoft). The next steps are described on my next post. Comments about this post welcome at the original blog.

    Read the article

  • AutoFit in PowerPoint: Turn it OFF

    - by Daniel Moth
    Once a feature has shipped, it is very hard to eliminate it from the next release. If I was in charge of the PowerPoint product, I would not hesitate for a second to remove the dreadful AutoFit feature. Fortunately, AutoFit can be turned off on a slide-by-slide basis and, even better, globally: go to the PowerPoint "Options" and under "Proofing" find the "AutoCorrect Options…" button which brings up the dialog where you need to uncheck the last two checkboxes (see the screenshot to the right). AutoFit is the ability for the user to keep hitting the Enter key as they type more and more text into a slide and it magically still fits, by shrinking the space between the lines and then the text font size. It is the root of all slide evil. It encourages people to think of a slide as a Word document (which may be your goal, if you are presenting to execs in Microsoft, but that is a different story). AutoFit is the reason you fall asleep in presentations. AutoFit causes too much text to appear on a slide which by extension causes the following: When the slide appears, the text is so small so it is not readable by everyone in the audience. They dismiss the presenter as someone who does not care for them and then they stop paying attention. If the text is readable, but it is too much (hence the AutoFit feature kicked in when the slide was authored), the audience is busy reading the slide and not paying attention to the presenter. Humans can either listen well or read well at the same time, so when they are done reading they now feel that they missed whatever the speaker was saying. So they "switch off" for the rest of the slide until the next slide kicks in, which is the natural point for them to pick up paying attention again. Every slide ends up with different sized text. The less visual consistency between slides, the more your presentation feels unprofessional. You can do better than dismiss the (subconscious) negative effect a deck with inconsistent slides has on an audience. In contrast, the absence of AutoFit Leads to consistency among all slides in a deck with regards to amount of text and size of said text. Ensures the text is readable by everyone in the audience (presuming the PowerPoint template is designed for the room where the presentation is delivered). Encourages the presenter to create slides with the minimum necessary text to help the audience understand the basic structure, flow, and key points of the presentation. The "meat" of the presentation is delivered verbally by the presenter themselves, which is why they are in the room in the first place. Following on from the previous point, the audience can at a quick glance consume the text on the slide when it appears and then concentrate entirely on the presenter and what they have to say. You could argue that everything above has nothing to do with the AutoFit feature and all to do with the advice to keep slide content short. You would be right, but the on-by-default AutoFit feature is the one that stops most people from seeing and embracing that truth. In other words, the slides are the tool that aids the presenter in delivering their message, instead of the presenter being the tool that advances the slides which hold the message. To get there, embrace terse slides: the first step is to turn off this horrible feature (that was probably introduced due to the misuse of this tool within Microsoft). The next steps are described on my next post. Comments about this post welcome at the original blog.

    Read the article

  • Create Panoramic Photos with Windows Live Photo Gallery

    - by Matthew Guay
    Have you ever wanted to capture the view from a mountain or the full size of a building?  Here’s how you can stitch multiple shots together into the perfect panoramic picture for free with Windows Live Photo Gallery. Getting Started First, make sure you have Windows Live Photo Gallery installed (link below).  Live Photo Gallery is part of the Windows Live Essentials suite, you can select other programs to install along with it if you want. Make sure to uncheck setting your home page to MSN and setting your search provider as Bing if you don’t want them changed.   Now, make sure you have pictures that will work good for a panorama.  These need to be taken from the same spot, and the edges of the pictures need to overlap so the program can find where the pictures connect.  Here we have taken pictures inside a building with a cell phone camera. Make your Panorama Open Live Photo Gallery, and find the pictures you want to use in your panorama.  It will automatically index and display all of the photos in your Pictures folder or Library if you’re using Windows 7. If your pictures are saved elsewhere, add that folder to Photo Gallery.  Click File, Include a folder in the gallery, and select the correct folder at the prompt. Now select all of the pictures that you will use in your panorama.  You can easily do this by clicking the checkbox on each picture that appears when you hover over it.    Once all of the pictures are selected, click Make in the menu bar and select Create panoramic photo… Alternately, right-click on any of the pictures you’ve selected, and click Create panoramic photo… Live Photo Gallery will analyze your photos and compost them together to create a panorama.  The amount of time it takes will vary depending on the number of photos, size of the pictures, and computer speed. When it’s finished making the panorama, you’ll be prompted to enter a file name and save the picture. Your new panorama picture will open as soon as it’s saved.  Depending on your shots, the picture may have quite a bit of black space around the edges where each picture didn’t cover the exact same amount of area. To correct this, click Fix on the menu bar, and then select Crop Photo in the sidebar that opens. Select the center of the picture with the crop tool, and click Apply when you’ve got the selection you want. Live Photo Gallery automatically saves your picture changes, and you can revert back to the original picture if you wish. Now you’ve got a nice panoramic shot, trimmed and ready to print, share, and more. Conclusion Panoramic shots are great ways to capture your whole surroundings, whether it’s a sports stadium, mall, or a scenic mountain view.  They can also be a great way to capture more with low-resolution cameras. Link Download Windows Live Photo Gallery Similar Articles Productive Geek Tips Family Fun: Share Photos with Photo Gallery and Windows Live SpacesLearning Windows 7: Manage Photos with Live Photo GalleryEasily Re-Size Photos in Windows Vista or XPInstall Windows Live Essentials In Windows 7Convert Photos to Flash for Your Website TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

    Read the article

  • Using the RSSBus Salesforce Excel Add-In From Excel Macros (VBA)

    - by dataintegration
    The RSSBus Salesforce Excel Add-In makes it easy to retrieve and update data from Salesforce from within Microsoft Excel. In addition to the built-in wizards that make data manipulation possible without code, the full functionality of the RSSBus Excel Add-Ins is available programmatically with Excel Macros (VBA) and Excel Functions. This article shows how to write an Excel macro that can be used to perform bulk inserts into Salesforce. Although this article uses the Salesforce Excel Add-In as an example, the same process can be applied to any of the Excel Add-Ins available on our website. Step 1: Download and install the RSSBus Excel Add-In available on our website. Step 2: Open Excel and create place holder cells for the connection details that are needed from the macro. In this article, a spreadsheet will be created for batch inserts, and these cells will store the connection details, and will be used to report the job Id, the batch Id, and the batch status. Step 3: Switch to the Developer tab in Excel. Add a new button on the spreadsheet, and create a new macro associated with it. This macro will contain the code needed to insert a batch of rows into Salesforce. Step 4: Add a reference to the Excel Add-In by selecting Tools --> References --> RSSBus Excel Add-In. The macro functions of the Excel Add-In will be available once the reference has been added. The following code shows how to call a Stored Procedure. In this example, a job is created to insert Leads by calling the CreateJob stored procedure. CreateJob returns a jobId that can be used to upload a large number of Leads in one transaction. Note the use of cells B1, B2, B3, and B4 that were created in Step 2 to read the connection settings from the Excel SpreadSheet and to write out the status of the procedure. methodName = "CreateJob" module.SetProviderName ("Salesforce") nameArray = Array("ObjectName", "Action", "ConcurrencyMode") valueArray = Array("Lead", "insert", "Serial") user = Range("B1").value pass = Range("B2").value atoken = Range("B3").value If (Not user = "" And Not pass = "" And Not atoken = "") Then module.SetConnectionString ("User=" + user + ";Password=" + pass + ";Access Token=" + atoken + ";") If module.CallSP(methodName, nameArray, valueArray) Then Dim ColumnCount As Integer ColumnCount = module.GetColumnCount Dim idIndex As Integer For Count = 0 To ColumnCount - 1 Dim colName As String colName = module.GetColumnName(Count) If module.GetColumnName(Count) = "id" Then idIndex = Count End If Next While (Not module.EOF) Range("B4").value = module.GetValue(idIndex) module.MoveNext Wend Else MsgBox "The CreateJob query failed." End If Exit Sub Else MsgBox "Please specify the connection details." Exit Sub End If Error: MsgBox "ERROR: " & Err.Description Step 5: Add the code to your macro. If you use the code above, you can check the results at Salesforce.com. They can be seen at Administration Setup -> Monitoring -> Bulk Data Load Jobs. Download the attached sample file for a more complete demo. Distributing an Excel File With Macros An Excel file with macros is saved using the .xlms extension. The code for the macro remains in the Excel file, and you can distribute your Excel file to any machine where the RSSBus Salesforce Excel Add-In is already installed. Macro Sample File Please download the fully functional sample excel file that includes the code referenced here. You will also need the RSSBus Excel Add-In to make the connection. You can download a free trial here. Note: You may get an error message stating: "Can't find project or library." in Excel 2007, since this example is made using Excel 2010. To resolve this, navigate to Tools -> References and uncheck the "MISSING: RSSBus Excel Add-In", then scroll down and check the "RSSBus Excel Add-In" listed below it.

    Read the article

  • SQL SERVER – Read Only Files and SQL Server Management Studio (SSMS)

    - by pinaldave
    Just like any other Developer or DBA SQL Server Management Studio is my favorite application. Any any moment of the time I have multiple instances of the same application are open and I am working on it. Recently, I have come across a very interesting feature in SSMS related to “Read Only” files. I believe it is a little unknown feature as well so decided to write a blog about the same. First create a read only SQL file. You can make any file read by Right Click >> Properties >> Select Attribute Read Only. Now open the same file in SQL Server Management Studio. You will find that besides the file name there is a small ‘lock’ icon. This small icon indicates that the file is read only. Now let us attempt to edit the read only file. It will let us edit the file any way we want, however when we attempt to save it, it gives following pop-up value. The options in the pop-up are self explanatory and I liked it. The goal of the read only file is to prevent users to make un-intended changes. However, when a user should have complete control over the user file. User should be aware that the file is read only but if he wants to edit the file or save as a new file the choices should be present in front of it and the pop-up menu precisely captures the same. Now let us check option related to this feature in SSMS. Go to Menu >> Options >> Environment >> Documents You will find the third option which is “Allow editing of read-only files; warn when attempt to save”. In the above scenario it was already checked. Let us uncheck the same and do the same exercise which we have done earlier. I closed all the earlier window to avoid confusion. With the new option selected when I attempt to even modify the Read Only file, it gives me totally different pop up screen. It gives me an option like “Edit In-Memory”, “Make Writeable” etc. When you select “Edit In-Memory” it allows you to edit the file and later you can save as new file – just like the earlier scenario which we have discussed. . If clicked on the Make Writeable it will remove the restriction of the Read Only and file can be edited as pleased. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • IIS not starting: The process cannot access the file because it is being used by another process

    - by Rick Strahl
    Ok, apparently a few people knew about this issue, but it is new to me and has caused me nearly an hour to track down today. What happened is that I’ve been working all day doing some final pre-deployment testing of several tools on my local dev machine. In the process I’ve been starting and stopping several IIS 7 Web sites. At some point I was done and just wanted to start my Default Web Site again and found this  little gem of an error message popping up: The process cannot access the file because it is being used by another process. (Exception from HRESULT: 0x80070020) A lot of headless running around ensued after this, trying to figure out why IIS wouldn’t start. Oddly some sites started right up, others didn’t. I killed INetInfo, all worker processes, tried IISReset a million times and even rebooted – all to no avail. What gives? Skype, you evil Bastard! As it turns out the culprit is – drum roll please - Skype!  What, you may ask, does Skype have to do with IIS and Web Requests? It looks like recent versions of Skype have an option to run over Port 80 and 443 to allow running over corporate firewalls. Which is actually a nice feature that lets Skype work just about anywhere. What’s not so cool is that IIS fails to start up when another application is already using the same port that a Web site is mapped to. In the case of my dev site that’d be port 80 and Skype was hogging it. To fix this issue you can stop Skype from using port 80 and 443 which quickly fixes the problem. Or stop Skype. Duh! To permanently fix the problem in Skype find the option on the Options | Connection tab and uncheck the Use port 80/443 option: Oddly I haven’t run into this problem even though my setup hasn’t changed in quite some time. It appears that it’s bad startup timing that causes this problem to occur. Whatever the circumstance was, Skype somehow ended up starting before IIS.  If Skype is started after IIS has started it will automatically opt for other ports and not use port 80 and so there’s no problem. It’s easy to demonstrate this behavior if you’re looking for it: Stop IIS Stop Skype Start Skype and make a test call Start IIS And voila your error is ready for you! This really shouldn’t be a problem except that it would be really nice if IIS could give a more helpful error message when it can fire up a site because a port is blocked. “The process cannot access a file” is really not a very helpful error message in this scenario… I/O port / file ah what the heck it’s all the same to Windows. Right! I’ve run into this situation quite a bit with other, albeit more obvious applications like running Apache on the local machine for testing and then trying to run an IIS application. Same situation,  although it’s been a while – pre IIS 7 and I think previous versions of IIS actually gave more useful error messages for port blockages and that would be helpful. On the way to figuring this out I ran into some pretty humorous forum posts though with people ragging on why the hell you would be running IIS. Or Skype. The misinformed paranoia police out in full force so to say :-). It’ll be nice to start running IIS Express once Visual Studio 2010 SP1 gets released. Anyway, no surprise that Skype didn’t jump out at me as the culprit right away and I was left fumbling for a while until the Internet came to the rescue. I’m not the first to have found this for sure – I posted a message on Twitter and dozens of people replied they’d run into this before as well. Seems worth mentioning again though – since I’m sure to forget that this happened in a year from now when I hit that same error. Maybe I’ll even find this blog post to remind me…© Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7  Windows  

    Read the article

  • Share Folders & Files Between Vista and XP Machines

    - by Mysticgeek
    Since Microsoft has three operating systems in use, chances are you’ll find yourself needing to share files between XP, Vista, Windows 7, or some combination of the three. Here we take a look at sharing between a Vista and XP on your home network. Share Without Password Protected Sharing If you’re not worried about who’s accessing the files and folders, the easiest method is to disable Password Protected Sharing. So on the Vista machine open Network and Sharing Center. Under Sharing and Discovery make sure Network Discovery, File Sharing, and, Public Folder Sharing are turned on. Also turn off Password Protected Sharing… Now go into the Vista Public folder, located in C:\Users\Public, and add what you want to share or create a new folder. In this example we created a new folder called XP_Share and added some files to it. On the XP machine go into My Network Places and under Network Tasks click on View Workgroup Computers. Now you’ll see all of the computers on your network which should be part of the same Workgroup. Here we need to double-click on the Vista computer. And there we go…no password to enter so we can access the XP_Share folder or anything else that is located in the Public folder. Share with Password Protected Sharing If you want to keep Password Protected Sharing turned on, then we need to do things a little different. When it’s turned on and you try to access the Vista machine from XP, you’re prompted for a password, and no matter what you think the credentials are, you can’t get access…very annoying. So what we need to do is add the XP Machine as a user. Right-click on Computer from the Start Menu or desktop icon and select Manage from the context menu. The Computer Management screen opens up and you want to expand Local Users and Groups, then the Users folder. Then right-click any open area an select New User. Now create a new user name and password, you can also fill in the other fields if you want. Then make sure to uncheck User must change password at next logon and check the box next to Password never expires. Click the Create button and close out of the New User screen. You’ll then see the new user we created in the list and you can close out of the Computer Management window. Now back on the XP computer when you double-click on the Vista machine, your prompted to log in. Just type in the username and password you just created. Now you’ll have access to the Public folder contents. Set up Sharing on XP If you want to access a shared folder from the Vista computer located on the XP machine, it’s the same process in reverse. On the XP computer in Shared Documents, right-click on the folder you want to share and select Sharing and Security. Then select the radio button next to Share this folder and click Ok. Go into Computer Management and create a new user… Now from the Vista machine double click on the XP machine icon, enter the password, then access the folders and files you need. If you have multiple versions of Windows on your home network, you’ll now be able to access files and folders from each of them. If you want to share between Windows 7 and XP check out our article on how to share files and printers between Windows 7 and XP. You might also want to check out our article on how to share files and printers between Windows 7 and Vista. Similar Articles Productive Geek Tips Show Hidden Files and Folders in Windows 7 or VistaHow To Share Files and Printers Between Windows 7 and VistaShare Files and Printers between Windows 7 and XPHow To Share a Folder the XP Way in Windows VistaMoving Your Personal Data Folders in Windows Vista the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs The Wearing of the Green – St. Patrick’s Day Theme (Firefox) Perform a Background Check on Yourself

    Read the article

  • Uninstall, Disable, or Remove Windows 7 Media Center

    - by Mysticgeek
    Although Windows 7 Media Center has improved a lot over previous versions of Windows, but you might want to disable it for different reasons. Here we take a look at a couple of methods to get rid of it. There are a variety of reasons you might want to disable Windows 7 Media Center. Maybe you own a business and don’t want it to run on the machines. Or perhaps you don’t use it at all and just don’t want it around. Turn Off WMC Using Programs and Features Probably the easiest way to get rid of it on all versions of Windows 7 is to open Control Panel and select Programs and Features. This method is similar to disabling Internet Explorer 8 in Windows 7. On the left hand panel click on Turn Windows Features on or off. Scroll down to Media Features and expand the folder. Then Uncheck Windows Media Center… You’ll get a verification message making sure you want to disable it, click Yes. Then the box next to Windows Media Center will be empty…click OK. Wait while WMC is disabled… To complete the process a reboot is required. After getting back from the restart, the WMC icon will be gone and there won’t be any way to launch it. Re-enable WMC If you want to re-enable it, just go back in and recheck it. Again you’ll need to wait while it’s configured, but when it’s done, a restart is not required.   Disable Media Center Using Group Policy Note: This process uses Group Policy Editor which is not available in Home versions of Windows 7. Click on the Start menu and type gpedit.msc into the Search box and hit Enter. Now navigate to User Configuration \ Administrative Templates \ Windows Components \ Windows Media Center. Double-click on Do not allow Windows Media Center to run. Then select the radio button next to Enabled, click OK and close out of Group Policy Editor. Now if a user tries to launch WMC they will get the following message. Conclusion If you’re not a fan of Windows Media Center or want to disable it for whatever reason, the process is simple and there are a couple of ways you can do it. WMC is not included in Starter or Home Basic versions of Windows 7. If you’re new to Windows 7 Media Center, you might want to check out our guide on getting started and setting up live TV. Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Disable Windows Mobility Center in Windows 7 or VistaMake Outlook Faster by Disabling Unnecessary Add-InsSchedule Updates for Windows Media CenterRemove "Map Network Drive" Menu Item from Windows Vista or XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Find Downloads and Add-ins for Outlook Recycle ! Find That Elusive Icon with FindIcons Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa !

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15  | Next Page >