Search Results

Search found 29284 results on 1172 pages for 'weblogic 10 x'.

Page 10/1172 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

  • stunnel: SSL-to-SSL? (for smtp/imap)

    - by nonot1
    Hello, How can I configure stunnel to accpet SSL connections, and connect then to an SSL port on a different server? Here is my setup: Our ISP's server, "Mail Server", supports smtp/imap over SSL. (Not starttls. Just over ssl.) But, I have a bunch of client machines that will only trust a specific, internal, root certificate. Thus, they can not connect to "Mail Server". For these client machines, I'd like to make a dedicated "Mail Tunnel" host that uses stunnel to listen with an in-house signed SSL certificate, and just forward data to "Mail Server" using a 2nd SSL connection. Can this be done? What would be the specific steps for Ubuntu Server 10.10? (I'm not too familiar with persistent service configuration.) Thank you

    Read the article

  • Ubuntu - No gnome-panels, no right-click, no internet, no hotkeys

    - by Darthfett
    Hey guys, I've been using Ubuntu (Maverick 10.10) on my desktop (ATI Radeon 5830) for about 3 weeks now, but all of a sudden I am unable to even use my computer. As soon as I start up, I see my desktop, with icons, but I don't see any gnome-panels, and I'm unable to get any options if I right-click. I can start programs by double clicking them. I also cannot get an internet connection. I've tried restarting gnome-panel by killing it, using Ctrl+Alt+5 to switch to a terminal (I don't have a shortcut to one on my desktop, and no hotkeys will work), but no luck. Restarting my computer has no effect upon this (I have to manually cut the power, since I don't know the terminal command). As far as I know, I have not made any changes, and I've never had any problems in the past. This started when I was playing Minecraft, but my internet crapped out, and no amount of re-trying the connection would work. I know it was my computer, as my brother's was working fine in the other room. Any clues as to what's going on? I'm more than willing to troubleshoot.

    Read the article

  • nvidia on ubuntu 10.10: switching dvi socket

    - by lurscher
    i have ubuntu 10.10 x86_64 with nvidia 9800 gt and nvidia driver version 270.41.06 my video card has two DVI sockets, but i only use single monitor configuration. Now, i think the main DVI socket might be busted, so i want to try to enable the other as the main one, however, i don't know how to achieve that. I tried just plugging the monitor in that socket but it won't just auto-detect (it would have been way too easy to just work)

    Read the article

  • Good set of web hosting permissions?

    - by Jorge Israel Peña
    Hey guys, I just got a linode and I'm in the process of configuring it. It's running nginx with php-fpm and passenger. nginx was compiled and is running as user nginx. php-fpm (php with fastcgi process manager) is running as www-data (in group www-data). My sites are currently in /var/www, so for example /var/www/test.com I'm just wondering what the general 'flow' of things is. So for example, /var/www is owned by root, should I chown of /var/www/test.com to nginx or www-data? Or should I put nginx in the www-data group? How should site uploading work, I just transfer files to the /var/www/test.com directory as root (sudo) and then chown -R www-data:www-data .? Thanks. I'm capable of figuring things out on my own, I'm just wondering what the typical/general way of handling users/groups/permissions/site-files is on linux with a webserver.

    Read the article

  • Can't install xclip on Ubuntu 10.10

    - by wildster
    I'm trying to load an SSH key to Github from a new machine and this command is not working: sudo apt-get install xclip Reading package lists... Done Building dependency tree Reading state information... Done Package xclip is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package xclip has no installation candidate when I try: sudo aptitude install xclip Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done No candidate version found for xclip No candidate version found for xclip The following partially installed packages will be configured: synaptics-dkms 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Writing extended state information... Done Setting up synaptics-dkms (1.1.1) ... Loading new synaptics-1.1.1 DKMS files... Error! Cannot locate /usr/src/synaptics-1.1.1.dkms.tar.gz. File does not exist. dpkg: error processing synaptics-dkms (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: synaptics-dkms E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up synaptics-dkms (1.1.1) ... Loading new synaptics-1.1.1 DKMS files... Error! Cannot locate /usr/src/synaptics-1.1.1.dkms.tar.gz. File does not exist. dpkg: error processing synaptics-dkms (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: synaptics-dkms Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Any idea how I can install this? Mucho thanks in advance

    Read the article

  • Calculating RAM Performance? Example: DDR3-2133 CL9-11-10-28 1.65V vs DDR3-1600 CL10-10-10-30 1.5V

    - by user1131467
    How do you calculate the relative performance of PC RAM? For example, what is the relative performance of the following: G.Skill Ripjaws Z 8 x 4GB Kit, DDR3-2133, [email protected] G.Skill Ripjaws Z 4 x 8GB Kit, DDR3-1600, [email protected] If it's relevant, when they are used in a top of the line ASUS Rampage IV Extreme motherboard and Intel i7 3960X? By performance, I mean relative: read latency write latency read bandwidth write bandwidth Please include working. (I mean how did you arrive at the figures based on timing and DDR3-speed)

    Read the article

  • Looking for Ubuntu 10.10 driver for GeForce GT 425M GPU.

    - by Fantomas
    It came with my Sony VAIO® VPCF133FX/H 16.4" Notebook. Ubuntu does suggest an NVIDIA driver for me, but when I install it, I cannot boot back in normally. I have to boot into a failsafe mode, then reset graphics setting to default, and reboot again. Right now I am stuck in 800 x 600 mode, but I would like to do better, and take advantage of my 1GB graphics memory :(. Please let me know if you have questions.

    Read the article

  • Ubuntu 10.10: getting appropiate monitor resolution for lcd hdtv

    - by lurscher
    I'm running Ubuntu 10.10 x86_64 version, with Nvidia 9800 GT, installed 270.41.06 Nvidia drivers following this guide. I have a LG42LH30FR LCD TV connected with the dvi link - RGB PC input I'm able to get 1024x768 resolution without overscan (I can get 1080i = 1366x768 but there is a lot of hidden screen space to the right and I don't know what to do about it). I want to get full HD I can get full HD (1080p = 1920x1080) on Windows XP 64-bit with custom resolution created with Nvidia Control Panel, from reading over xorg.conf configurations it seems I need to add a certain modeling to the monitor configuration, but I don't know where to get the appropriate options for this task any suggestions?

    Read the article

  • change browser to open weblinks in thunderbird

    - by Bevor
    Hello, because it's almost obvious that either Thunderbird or Firefox freeze my whole system after some time, I'd like to not use FF at the moment and let Thunderbird run only for a short time as long as I check e-mails. Thunderbird web links should be opened with opera from now. For that I went in Thunderbird to Preferences-Advanced-General-Config Editor and set the following: network.protocol-handler.app.http -> /usr/bin/opera network.protocol-handler.app.https -> /usr/bin/opera network.protocol-handler.warn-external.ftp -> true network.protocol-handler.warn-external.http -> true network.protocol-handler.warn-external.https -> true Moreover I changed in Gnome in System-Preferences-Prefered Applications Opera as webbrowser and I checked in FF that it should warn if FF is not the default browser (obviously it isn't anymore). Unfortunately all of these settings doesn't work. Thunderbird still opens web links with FF. Any explantions why? (I already restarted Thunderbird although I don't have to, but no effect)

    Read the article

  • Bring 2 GB Large Pages to Solaris 10

    - by Giri Mandalika
    Few facts: 8 KB is the default page size on Oracle Solaris 10 and 11 as of this writing Both hardware and software must have support for 2 GB large pages SPARC T4 processors are capable of supporting 2 GB pages Oracle Solaris 11 kernel has in-built support for 2 GB pages Oracle Solaris 10 has no default support for 2 GB pages Memory intensive 64-bit applications may benefit the most from using 2 GB pages Prerequisites: OS: Oracle Solaris 10 8/11 (Update 10) or later Hardware: Oracle servers with SPARC T4 processors e.g., SPARC T4-1, T4-2 or T4-4, SPARC SuperCluster T4-4 Steps to enable 2 GB large pages on Oracle Solaris 10: Install the latest kernel patch or ensure that 147440-04 or later was installed Check the patch download instructions Add the following line to /etc/system and reboot set max_uheap_lpsize=0x80000000 Finally check the output of the following command when the system is back online pagesize -a eg., % pagesize -a 8192 <-- 8K 65536 <-- 64K 4194304 <-- 4M 268435456 <-- 256M 2147483648 <-- 2G % uname -a SunOS jar-jar 5.10 Generic_147440-21 sun4v sparc sun4v Also See: Solaris 9 or later: More performance with Large Pages (MPSS) Large page support for instructions (text) in Solaris 10 1/06 Solaris: How To Disable Out Of The Box (OOB) Large Page Support? Memory fragmentation / Large Pages on Solaris x86

    Read the article

  • Can't seem to run Apache 2.2 on Ubuntu 10.10 (Maverick Meerkat)

    - by Pam
    Here's my error message when I run sudo apachectl start: (98)Address already in use: make_sock: could not bind to address 127.0.0.1:80 no listening sockets available, shutting down Unable to open logs Action 'start' failed. The Apache error log may have more information. myUser@myMachine:/etc $ sudo apachectl stop httpd (no pid file) not running I'm brand new to Ubuntu (and Linux) and downloaded Apache 2.2 (worker) through Synaptic. I found a httpd.conf flavor I liked and am using it.

    Read the article

  • What version of Ubuntu to use for Desktop with 8Gb RAM?

    - by Alexander
    This may sound as a stupid question, but I am really interested whether Ubuntu Desktop i386 will be able to use all my available RAM. I want to use the latest, non-LTS version, 10.10. It says on the website that it's (i386) the Recommended version. I also recall that Flash Player had issues with 64 bit Linux. Also, the 64 bit version is listed in the Universal USB Installer as amd64. Does this mean that it's using instruction sets specific to AMD CPUs? (I have an Intel) Will it work fine with Intel? So which one to download and install? What to do to be able to use 8Gb of RAM?

    Read the article

  • How to access USB stick content from VMWare running Ubuntu 10.10?

    - by JVerstry
    Hi, I am running Ubuntu 10.10 via VMWare under Windows 7. I have followed the procedure to install the USB stick. It is now connected to the host. However, I don't know how to access the content of the stick. My Google research indicates that this may be a mounting issue. I read somewhere that I should check /proc/bus/usb, but the usb directory does not exist in /proc/bus. Unfortunately, I am not a Linux expert at this. The ultimate issue I am trying to solve is the one describe here. I am trying to use vi to create ~/.vmware/config, but it is virtually impossible to use vi, since I don't have access to the arrow keys (chicken & egg problem). I have created the config file on my usb stick and want to copy it where it should be. Thanks!

    Read the article

  • No sound Ubuntu 10.10 (have SB Live! card)

    - by Chris Frazier
    I am new to Linux/Ubuntu and I just installed 10.10 on my Dell Desktop PC that was running Windows XP. The PC is about 5-6 years old and the sound card it has is a SoundBlaster Live! card. The Sound Preferences recognizes the card as [SB Live! Value] EMU10k1X. It is currently set to Analog Stereo Duplex. I tried multiple other sound configurations and nothing works. No sound but some clicks come out of the speakers. I ran the system test and during the audio tests the same thing happened, just clicks and pops. I tried to play some music with Rhythmbox and when it tries to play a track it tries for several seconds and then just closes itself, or sometimes just doesn't play. I ran a check for drivers, but the only driver it found to install was for my nVidia video card. It did not show any drivers for the sound card. Does anyone have any idea what I need to do to get the sound to work?

    Read the article

  • installing a script as startup service in ubuntu

    - by Jibin
    I have a script openerp-server.py in ~/openerp/stable6/server/bin/.I want it to be run at startup.(As a service or not - I don't know the difference) These are the steps I followed 1 Created a script 'openerp-server' with the following lines in /etc/init.d/ #!/bin/sh cd ~/openerp/stable6/server/bin/ exec /usr/bin/python ./openerp-server.py $@ 2 Made the script executable by using the following command sudo chmod +x /etc/init.d/openerp-server 3 Made the link run on startup by using the following command sudo update-rc.d openerp-server I checked using sysv-rc-conf.And openerp-server was selected for run level 2,3,4,5. Now after restarting I checked if the openerp-server.py is running, it was not running. Please help.

    Read the article

  • Ubuntu freezes when gdm starts showing userlist

    - by Enrique Becerra
    I have Ubuntu 10.10 (upgraded from 10.04) I was browsing in Firefox yesterday, then the PC did a suddenly reset Once I restarted, everything went normal until gdm begun showing. Then everything froze and locked when userlist showed. I could not move mouse pointer nor do anything with keyboard. Both, mouse and keyboard work fine, because this Ubuntu is dual-booting with a Windows XP install which loads/works fine. Here is my .xsession-errors file, but I don't have a clue what may be wrong. Thanks http://pastebin.com/GVtneEAF

    Read the article

  • Ubuntu freezes when gdm starts showing userlist

    - by Enrique
    I have Ubuntu 10.10 (upgraded from 10.04) I was browsing in Firefox yesterday, then the PC did a suddenly reset Once I restarted, everything went normal until gdm begun showing. Then everything froze and locked when userlist showed. I could not move mouse pointer nor do anything with keyboard. Both, mouse and keyboard work fine, because this Ubuntu is dual-booting with a Windows XP install which loads/works fine. Here is my .xsession-errors file, but I don't have a clue what may be wrong. Thanks http://pastebin.com/GVtneEAF

    Read the article

  • Postfix connects to wrong relay?

    - by Eric
    I am trying to set up postfix on my ubuntu server in order to send emails via my isp's smtp server. I seem to have missed something because the mail.log tells me: Jan 19 11:23:11 mediaserver postfix/smtp[5722]: CD73EA05B7: to=<[email protected]>, relay=new.mailia.net[85.183.240.20]:25, delay=6.2, delays=5.7/0.02/0.5/0, dsn=4.7.0, status=deferred (SASL authentication failed; server new.mailia.net[85.183.240.20] said: 535 5.7.0 Error: authentication failed: ) The relay "new.mailia.net[85.183.240.20]:25" was not set up by me. I use "relayhost = smtp.alice.de". Why is postfix trying to connect to a different server? Here is my main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mediaserver alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = mediaserver, localhost.localdomain, , localhost relayhost = smtp.alice.de mynetworks = 127.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all myorigin = /etc/mailname inet_protocols = all sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_password smtp_sasl_security_options = noanonymous Output of postconf -n: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 mydestination = mediaserver, localhost.localdomain, , localhost myhostname = mediaserver mynetworks = 127.0.0.0/8 myorigin = /etc/mailname readme_directory = no recipient_delimiter = relayhost = smtp.alice.de sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_generic_maps = hash:/etc/postfix/generic smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_password smtp_sasl_security_options = noanonymous smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes

    Read the article

  • critical swap nagios

    - by Toby Joiner
    I installed nagios a very long time ago, and have started trying to use it now. I am getting this error: Current Status: CRITICAL (for 231d 16h 52m 49s) Status Information: SWAP CRITICAL - 100% free (0 MB out of 0 MB) Performance Data: swap=0MB;0;0;0;0 Current Attempt: 4/4 (HARD state) Last Check Time: 01-09-2011 13:26:34 Check Type: ACTIVE Check Latency / Duration: 0.125 / 0.004 seconds Next Scheduled Check: 01-09-2011 13:31:34 Last State Change: 05-22-2010 21:36:47 Last Notification: 01-09-2011 13:01:42 (notification 5521) Is This Service Flapping? NO (0.00% state change) In Scheduled Downtime? NO Last Update: 01-09-2011 13:29:32 ( 0d 0h 0m 4s ago) Is this normal? Should I be concerned? If more info is needed please let me know.

    Read the article

  • Vmware Workstation, Win7 host, Ubuntu guests with Nat + Host-only networks but they cannot connect to the Internet

    - by Ikon
    I have a Win7 host machine with Vmware Workstation. In the workstation I have 3 Ubuntu installed. All 3 Ubuntu guests have a Nat network - to access the internet without asking the router for a local address - and a Host-only network - to connect all Ubuntu quests and the host in a private network for internal communication, without touching the router. When I try to make any of the Ubuntu quests to get data from the internet - assuming that they would figure out that the Nat-ed interface can access the requested data - they fail and report that there is no route to my query. If I disconnect the 2nd interface on the Ubuntu guests with the Host-only network and restart networking, they start to know the route to the internet. Odd, during the installation of the guests they asked which of the 2 given interfaces - with Nat and Host-only config - should be used to get updates during installation and they oddly managed to get the updates. Not so after the installation has finished and rebooted. I have checked the Virtual Network Editor that the Nat interface should use my real network card to access the net, so there should be no problem. I wish not to use the router's dhcp service to give the Ubuntu quests an address, and also I don't want the guests to be accessable from the local network directly, but only by the host - that's the Host-only network is for. Any suggestions? Edit: 192.168.189.0 is the Nat interface and 192.168.7.0 is the Host-only. $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.7.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.189.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.189.2 0.0.0.0 UG 100 0 0 eth0

    Read the article

  • How can I control wireless networks in Ubuntu without Network-Manager?

    - by Solignis
    Hi there, I recently installed Ubuntu on a laptop I got. I was having issues with the network manager just like I was having in my VM where it was not setting up the hostname correctly. Anyhow now I have a problem, since it is a laptop it will be moving.... But I have no way to discover new wireless networks. Anyway I can gain that functionality back? The problem I am running into is that I need to set the DNS search and domain for the machine so I can access my network but the network-manager was overriding the settings. Any help would be much appreciated.

    Read the article

  • Ubuntu odd mouse and keyboard behavior when window gains inner focus

    - by Scott
    This morning on my Ubuntu 10.10 system when I open a window - for example, system-preferences-about me, if I click in to a field such as "work email", I can no longer close the window with the mouse! Clicking the X on the window will not work. Also, I loose the ability to click on anything else - clicking on the desktop, icons, menus, workspaces, etc. do not work. Even the effect when you hover over a folder on the desktop and that folder highlights - that stops until the window is closed. If I open this same screen but do not click in to a field, everything is fine - I can close the window with the X and everything else works fine. Same thing happens with several other windows I tried. Even calculator - I can open it, everything is fine until I click on a button in the calculator - then no ability to click on anything else. Have to Alt-F4 to close the window. The system is only about a week old from a fresh install (64 bit ubuntu - quad core amd machine). I uninstalled wine, turned off remote desktop/disabled in startup, also in startup disabled visual assistance, bluetooth, dropbox, klipper. Reboot, no difference. The only other thing non-standard I see in startup is nvidia. Using a logitec usb mouse, saitek usb keyboard. Was working fine yesterday. I can not think of anything I did / installed yesterday. I switched themse, then went to update manager and saw two x server / x org related updates and installed them, reboot and NOW IT IS FINE! However, then I re-enabled dropbox, klipper and remote desktop rebooted and the problem is back. Again I disabled and rebooted. Problem is still there!! So somehow I fixed it at least for a few minutes, but now it is back and I am out of ideas.

    Read the article

  • Upstart: accept user input to switch xorg.conf

    - by Utaal
    Hi all! I'm trying to get a startup script requiring user input running before gdm starts (the script should allow me to choose from a list of xorg.conf's the one I'd like to use for the current session). Already tried creating a pregdm.conf in /etc/init, containing: start on filesystem stop on runlevels [06] # ... console output script # script that uses read to gather user input and replaces xorg.conf with the selected one end script and changing start on in /etc/init/gdm.conf to: start on (filesystem and started dbus and started pregdm and (drm-device-added card0 PRIMARY_DEVICE_FOR_DISPLAY=1 or stopped udevtrigger)) Echos are displayed in console but I can't make it wait for user input: gdm is started straight away. Any pointers? Thanks a lot

    Read the article

  • How to minimize services in ubuntu

    - by codeomnitrix
    Hello everyone.I am using ubuntu from last 6-7 months. I am having 512mb ram and a p4 processor with 1.73 Ghz processing speed. And being a programmer i have to work with eclipse and netbeans like ide's, and they sometimes hang. So is there any option in ubuntu to stop the services running just like i do have in windows "msconfig" or mycomputer-manage, and where could i find the details about the services so that i should know what will be its effect if i stop this service. I am using ubuntu 10.10 Thanks

    Read the article

  • Problems login ubuntu 10.10

    - by siobhan
    I recently change my compiz settings for my cube and upon restarting my pc it first black screened, where it got stuck, on this screen the last command stated that it was checking the battery status, it was like this for hours i finally got thru to the Login screen but it will not accept the password (with i know is correct). I am a novice with Ubuntu but have read and tried everything the forums have told me to do but to no avail.... Please, please, please any help would be greatly appreciated. Many thanks.

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >