Search Results

Search found 2772 results on 111 pages for 'hour'.

Page 100/111 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >

• Mac OSX 10.8 Server DNS Domain Routing

  - by Oldek

  I just cant seem to figure out the logic in how to configure my Mac Server. So I have set up an DNS, which will take the domain and all subdomains and point towards an IP. File: db.mydomain.com (in /var/named/) mydomain.com. 10800 IN SOA mydomain.com. admin.mydomain.com. ( 2012110903 ; serial 3600 ; refresh (1 hour) 900 ; retry (15 minutes) 1209600 ; expire (2 weeks) 86400 ; minimum (1 day) ) 10800 IN NS mydomain.com. 10800 IN A 10.0.1.2 www.mydomain.com. 10800 IN A 10.0.1.2 So I want all of these requests to be requested to the 10.0.1.2 server, as I run 2 servers in my cluster. This one has always handled the requests, and now I want to add a server in between. So the server in between will get all the signals from my router which NAT the trafic coming from outside. So after setting this up and trying to point my port 80 towards my new server which will be the middle point, it doesn't work. Is it even possible to do it this way? First server: Mac Second server: Linux So what I try to achieve once more: 1. User goes to mydomain.com or www.mydomain.com 2. User request gets handled by my first server 3. First server refers to a local server, which is only available locally (it is configured to allow requests on port 80 and handle them) 4. Second server receives signal 5. Second server returns a request (either directly send to user or send through first server, whichever is most secure and configurable) I also want to be able to set up domains that lead to other servers in the future, and some that are only available within the VPN. (If that changes anything) I hope some kind soul could help me with this, it is really cumbersome for my mind to get the logic here. Do I have to configure my other server in any way? /Marcus

  Read the article

• Is there a way to replicate a very large file shares in real-time?

  - by fsckin

  I have an hourly cron job that copies about 40GB of data from a source folder into a new folder with the hour appended on the end. When it's done, the job prunes anything older than 24 hours. This data changes very often during work hours and is on a samba file share. Here's how the folder structure looks: \server\Version.1 \server\Version.2 \server\Version.3 ... \server\Version.24 The contents of each new folder compared to the last one usually doesn't change very much, since this is a hourly job. Now you might be thinking that I'm an idiot for setting dreaming this up. Truth is, I just found out. It's actually been used for years and is so incredibly simple, anyone could delete the ENTIRE 40GB share (imagine that dialog spooling up... deleting thousands and thousands of files) and it would actually be faster to restore by moving the latest copy back to the source than it took to delete. Brilliant! Now to top this off, I need to efficiently replicate this 960GB of "mostly similar" data to a remote server over WAN link, with the replication happening as close to real-time as possible -- think hot spare, disaster recovery, etc. My first thought was rsync. Total failure. Rsync sees it sees a deletion of the folder that is 24 hours old and the addition of a new folder with 30GB of data to sync! I also looked at rdiff-backup and unison, they both appear to use similar algorithms and do not keep enough meta-data to do this intelligently. Best thing that I can find "out of the box" to do this is Windows Server "Distributed Filesystem Replication" which uses "Remote Differential Compression" -- After reading the background information on how this works, it actually looks like exactly what I need. Problem: Both servers are running Linux. D'oh! One approach to this I'm looking at is this, say it's 5AM and the cron job finishes: New Version.5 folder arrives at on local server SSH to remote server and copy Version.4 to Version.5 Run rsync on the local server pushing changes to the remote server. Rsync finally knows to do a differential copy between Version.4 and Version.5 Is there a smarter way to replicate Samba shares as close to real-time as possible? Anything out there that does "Remote Differential Compression" on Linux?

  Read the article

• Lenovo Windows 8 EFI restore from image

  - by anderhil

  First time here. I have bought e530 with windows 8 and the first hour of work with it i have a problem. I have ssd with windows 7 which i want to use with my new e530. I have made a sysprep of win 7 and installed ssd to the e530. The HDD which was inside e530 i want to use as second hdd instead of my DVD Drive. I connected this HDD through usb-to-sata adapter to copy some files from ssd to the hdd. Unfortunately it didn't see the file system on the HDD (but first time i have booted to it and first boot into Windows 8) I've made some mistakes and i corrupt the filesystem on the hdd. I tried bunch of tricks to recover the GPT, but it didn't work. I have managed to recover the Lenovo_Recovery partition to my ssd using recovery tools. And now I'm stuck, with this new things to me - EFI, GPT, etc i don't how this stuff works, and i have been trying to understand this for hours - but nothing seems to work. I want to restore the Windows 8 to the hdd, so it is there alive. What i have done so far: Formated the HDD I took the PBRALL file from the Lenovo_Recovery " convert gpt create partition Primary size=1000 ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=W format quick LABEL=WINRE_DRV create partition efi size=260 assign letter=s format quick fs=fat32 LABEL=SYSTEM_DRV create par msr size=128 create partition primary noerr assign letter=t format quick LABEL=Windows8_OS shrink desired=12197 create partition Primary ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=q format quick LABEL=Lenovo_Recovery " it recreated the partitions copied contents of SDRIVE.zip to SYSTEM_DRV partition copied contents of WDRIVE.zip to WINRE_DRV partition Copied restored Lenovo_Recovery back to Lenovo_Recovery partition So now I have 3 system partitions: SYSTE_DRV BOOT boot.sdi EFI BOOT bootx64.efi LenovoBT.efi Lenovo ... Microsoft ... WINRE_DRV\Recovery\WindowsRE\winre.wim Lenovo_Recovery (whic contains install.wim and bunch of other things) So i put back the HDD inside the laptop and tried to boot - but nothing works. It just doesn't boot to anything - no errors - nothing at all. When I choose this HDD manually for boot - just black screen blinks and that's all - it returns back to the devices boot menu. SYSTEM_DRV is EFI partition, so I don't understand why it doesn't boot, it has files needed inside. Can anybody tell me what should be done to make it boot to recovery console or smth like that? How to restore the Windows 8 from the Lenovo_Recovery install.wim image? As I understand I have all the files where they should be, but why it doesn't work? How to troubleshoot such things? Also, if somebody has good link where EFI booting process is explained in details that would be great. Cause i still don't understand how it knows what partition to boot?

  Read the article

• How can I minimize the amount my router slows down my Internet connection speed?

  - by Lord Torgamus

  Background I'm working with what I assume is a pretty common Internet setup: a cable modem, a wireless router and a few Internet-connected devices. Lately, I've started being more demanding on my Internet connection, and noticed that using my router slows down my download speeds considerably. I just kind of dealt with it until Zune Marketplace on the Xbox 360 told me that a movie was going to take well over ten hours to download, and I just didn't want to wait that long. Good little scientist that I am, I tried to reduce the problem down to one variable. The test As a control, I turned off all the devices in the house that use wireless Internet, and unplugged all the wired devices except for the Xbox. I also power-cycled both the modem and the router. I then tried to download the movie again, and was told that it would still take over ten hours. Next, I unplugged the router, and connected the Xbox directly to the modem. The movie downloaded in just over one hour. As far as I can tell, this means that my ISP, other cable users near me, the remote servers, anything wireless-related and my machines' disk speeds can't be at fault. A similar experiment that replaced the Xbox with a wired laptop produced similar results. To me, this says "the router is responsible for things taking around ten times longer to download." My question I'd still prefer to use the router for a few reasons: it's a pain to connect and disconnect everything every time there's a big file to download direct connection to the modem isn't good for security only one machine can be connected directly to the modem at a time What can I do to have fast connection speeds while still using the router? I don't mind turning other machines off, as long as I don't have to mess with power and ethernet cables. EDIT : After asking this followup question and then this one, I installed dd-wrt on my router, and I seem to be getting higher and more consistent speeds. Perhaps more importantly, my memory use is fairly constant. I know this isn't an answer — which is why I'm not posting it as an answer — but it is how I resolved the situation, and hopefully it'll be helpful for someone.

  Read the article

• SQLAuthority News – Author Visit Review – TechMela Nepal – March 29-30, 2010

  - by pinaldave

  I was very fortunate to attend TechMela at Kathmandu, Nepal on 29th and 30th of March 2010. I would like to thank Allen Bailochan Tuladhar from Microsoft MDP Nepal for inviting me. Allen is a person with seemingly infinite energy and unlimited passion for Microsoft Technology. If you get an opportunity to spend just one hour with him, you will surely be more enthusiastic with regards to Microsoft Technology. And, I was lucky enough that I was able to spend about a total of 9 days with him in Kathmandu, working along with him in the Tech Community. TechMela Nepal Pinal at TechMela, Nepal TechMela is considered as one of the biggest events in Nepal, having been organized by Microsoft MDP Nepal. This event was attended by around 500 students and hundreds of Tech professionals. The event was handled very professionally and at very large scale. Every minor detail was properly planned and obviously thought out well. There were around 50+ volunteers from MS MDP who were monitoring this event systematically to make sure the event would run as smooth as planned. Attendees in Geek T-Shirts During this event, I was delighted to meet David Lim of Microsoft Singapore. He is very passionate in working for Microsoft Technology, as well as building deep relations with the Community. I was fortunate to spend my entire afternoon with him during the sight-seeing trip. We discussed various MS technologies and their community’s adoption as well as the way how each of us can be a part of the community activity. He also delivered excellent keynotes at the event. I must say that this is one of the most enjoyable keynotes I have ever attended. It was interesting and interactive, and I must say that I had the 70s feelings with all the fonts and graphics. I still remember him saying, “Yeah, I was a student and I know you.” Allen Tuladhar, David Lim, Pinal Dave and Guests After the keynote, everybody cheered when Allen came on stage to talk about the event and to introduce the agenda for the next two days. I must say that Allen is one of the most well-known people in Nepal. I was impressed with his popularity, and to prove this, when he got on the stage he had to wait for a long full minute before he was able to greet “Welcome” while the attendees were clapping and cheering. Technology Panelist at Techmela Kathmandu, Nepal This event was blessed with the top-of-the-top officials of various IT industries, Nepal ministries and the US Embassy. All the prominent personalities were present for panel discussion on the stage. The talk was done on various subjects. Also, the energy level which was set by Allen really echoed in the audience as they asked certain questions on different global as well local IT-related questions. The panel discussion really was discussion instead of usual monologue of one person. Pinal Dave presenting at TechMela Kathmandu, Nepal This was a two-day event and my session was on either of the day. I had a great participation from the audience on both days. The place where the event was organized had a capacity of around 500+ audience. Both of my sessions were heavily attended and volunteers did a fabulous job helping the attendees find empty seats or arrange some additional seats. I was overwhelmed with the interaction I have received in the large hall. Attendees were not so shy to express their thoughts, so both the sessions were followed up by top notch one-on-one conversations for a couple of hours. Pinal Dave presenting at TechMela Kathmandu, Nepal Pinal Dave presenting at TechMela Kathmandu, Nepal There are many questions that I have received during the event, and many of them can be interesting for all of us here so I will write detailed blog posts on these subjects. I also tried to participate in the gaming activities held at the event, but I felt I was kind of lost even if I was only playing for the very first minutes. This made me realize that I am really getting old for video games. Allen presenting at TechMela Kathmandu, Nepal Allen’s session on Digital Photography was very impressive as he demonstrated so many features of the Windows Live Product that at one point I felt he is MVP for Windows Live. In fact, he demonstrated how all the Microsoft products work together to give users an excellent desktop experience; no wonder he is an MVP for Windows Desktop Experience. Pinal Dave presending at TechMela Kathmandu, Nepal Any event has two common dilemmas – food and logistics. However, this event had excellent food and state-of-the-art organization. I was very glad that this two-day event turned out to be one of the most successful events in Nepal. I also noticed that almost all attendees rate their experience as beyond expectation and truly exceptional. Pinal Dave and Allen Bailochan Tuladhar If you ever get invited by Allen in any of his event, I strongly suggest that you drop all your plans and scheduled stuff, and accept his invitation. For sure, the event will be a very memorable one and would be your once-in-a-lifetime experience. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

• SQLAuthority News – Author Visit Review – TechMela Nepal – March 29-30, 2010

  - by pinaldave

  I was very fortunate to attend TechMela at Kathmandu, Nepal on 29th and 30th of March 2010. I would like to thank Allen Bailochan Tuladhar from Microsoft MDP Nepal for inviting me. Allen is a person with seemingly infinite energy and unlimited passion for Microsoft Technology. If you get an opportunity to spend just one hour with him, you will surely be more enthusiastic with regards to Microsoft Technology. And, I was lucky enough that I was able to spend about a total of 9 days with him in Kathmandu, working along with him in the Tech Community. TechMela Nepal Pinal at TechMela, Nepal TechMela is considered as one of the biggest events in Nepal, having been organized by Microsoft MDP Nepal. This event was attended by around 500 students and hundreds of Tech professionals. The event was handled very professionally and at very large scale. Every minor detail was properly planned and obviously thought out well. There were around 50+ volunteers from MS MDP who were monitoring this event systematically to make sure the event would run as smooth as planned. Attendees in Geek T-Shirts During this event, I was delighted to meet David Lim of Microsoft Singapore. He is very passionate in working for Microsoft Technology, as well as building deep relations with the Community. I was fortunate to spend my entire afternoon with him during the sight-seeing trip. We discussed various MS technologies and their community’s adoption as well as the way how each of us can be a part of the community activity. He also delivered excellent keynotes at the event. I must say that this is one of the most enjoyable keynotes I have ever attended. It was interesting and interactive, and I must say that I had the 70s feelings with all the fonts and graphics. I still remember him saying, “Yeah, I was a student and I know you.” Allen Tuladhar, David Lim, Pinal Dave and Guests After the keynote, everybody cheered when Allen came on stage to talk about the event and to introduce the agenda for the next two days. I must say that Allen is one of the most well-known people in Nepal. I was impressed with his popularity, and to prove this, when he got on the stage he had to wait for a long full minute before he was able to greet “Welcome” while the attendees were clapping and cheering. Technology Panelist at Techmela Kathmandu, Nepal This event was blessed with the top-of-the-top officials of various IT industries, Nepal ministries and the US Embassy. All the prominent personalities were present for panel discussion on the stage. The talk was done on various subjects. Also, the energy level which was set by Allen really echoed in the audience as they asked certain questions on different global as well local IT-related questions. The panel discussion really was discussion instead of usual monologue of one person. Pinal Dave presending at TechMela Kathmandu, Nepal This was a two-day event and my session was on either of the day. I had a great participation from the audience on both days. The place where the event was organized had a capacity of around 500+ audience. Both of my sessions were heavily attended and volunteers did a fabulous job helping the attendees find empty seats or arrange some additional seats. I was overwhelmed with the interaction I have received in the large hall. Attendees were not so shy to express their thoughts, so both the sessions were followed up by top notch one-on-one conversations for a couple of hours. Pinal Dave presending at TechMela Kathmandu, Nepal Pinal Dave presending at TechMela Kathmandu, Nepal Pinal Dave presending at TechMela Kathmandu, Nepal There are many questions that I have received during the event, and many of them can be interesting for all of us here so I will write detailed blog posts on these subjects. I also tried to participate in the gaming activities held at the event, but I felt I was kind of lost even if I was only playing for the very first minutes. This made me realize that I am really getting old for video games. Allen presending at TechMela Kathmandu, Nepal Allen’s session on Digital Photography was very impressive as he demonstrated so many features of the Windows Live Product that at one point I felt he is MVP for Windows Live. In fact, he demonstrated how all the Microsoft products work together to give users an excellent desktop experience; no wonder he is an MVP for Windows Desktop Experience. Pinal Dave presending at TechMela Kathmandu, Nepal Any event has two common dilemmas – food and logistics. However, this event had excellent food and state-of-the-art organization. I was very glad that this two-day event turned out to be one of the most successful events in Nepal. I also noticed that almost all attendees rate their experience as beyond expectation and truly exceptional. Pinal Dave and Allen Bailochan Tuladhar If you ever get invited by Allen in any of his event, I strongly suggest that you drop all your plans and scheduled stuff, and accept his invitation. For sure, the event will be a very memorable one and would be your once-in-a-lifetime experience. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

• “Being Agile” Means No Documentation, Right?

  - by jesschadwick

  Ask most software professionals what Agile is and they’ll probably start talking about flexibility and delivering what the customer wants.  Some may even mention the word “iterations”.  But inevitably, they’ll say at some point that it means less or even no documentation.  After all, doesn’t creating, updating, and circulating painstakingly comprehensive documentation that everyone and their mother have officially signed off on go against the very core of Agile?  Of course it does!  But really, they’re missing the point! Read The Agile Manifesto. (No, seriously - read it now. It’s short. I’ll wait.)  It’s essentially a list of values.  More specifically, it’s a right-side/left-side weighted list of values:  “Value this over that”. Many people seem to get the impression that this is really a “good vs. bad” list and that those values on the right side are evil and should essentially be tossed on the floor.  This leads to the conclusion that in order to be Agile we must throw away our fancy expensive tools, document as little as possible, and scoff at the idea of a project plan.  This conclusion is quite convenient because it essentially means “less work, more productivity!” (particularly in regards to the documentation and project planning).  I couldn’t disagree with this conclusion more. My interpretation of the Manifesto targets “over” as the operative word.  It’s not just a list of right vs. wrong or good vs. bad.  It’s a list of priorities.  In other words, none of the concepts on the list should be removed from your development lifecycle – they are all important… just not equally important.  This is not a unique interpretation, in fact it says so right at the end of the manifesto! So, the next time your team sits down to tackle that big new project, don’t make the first order of business to outlaw all meetings, documentation, and project plans.  Instead, collaborate with both your team and the business members involved (you do have business members sitting in the room, directly involved in the project planning, right?) and determine the bare minimum that will allow all of you to work and communicate in the best way possible.  This often means that you can pick and choose which parts of the Agile methodologies and process work for your particular project and end up with an amalgamation of Waterfall, Agile, XP, SCRUM and whatever other methodologies the members of your team have been exposed to (my favorite is “SCRUMerfall”). The biggest implication of this is that there is no one way to implement Agile.  There is no checklist with which you can tick off boxes and confidently conclude that, “Yep, we’re Agile™!”  In fact, depending on your business and the members of your team, moving to Agile full-bore may actually be ill-advised.  Such a drastic change just ends up taking everyone out of their comfort zone which they inevitably fall back into by the end of the project.  This often results in frustration to the point that Agile is abandoned altogether because “we just need to ship something!”  Needless to say, this is far more devastating to a project. Instead, I offer this approach: keep it simple and take it slow.  If your business members or customers are only involved at the beginning phases and nowhere to be seen until the project is delivered, invite them to your daily meetings; encourage them to keep up to speed on what’s going on on a daily basis and provide feedback.  If your current process is heavy on the documentation, try to reduce it as opposed to eliminating it outright.  If you need a “TPS Change Request” signed in triplicate with a 5-day “cooling off period” before a change is implemented, try a simple bug tracking system!  Tighten the feedback loop! Finally, at the end of every “iteration” (whatever that means to you, as long as it’s relatively frequent), take as much time as you can spare (even if it’s an hour or so) and perform some kind of retrospective.  Learn from your mistakes.  Figure out what’s working for you and what’s not, then fix it.  Before you know it you’ve got a handful of iterations and/or projects under your belt and you sit down with your team to realize that, “Hey, this is working - we’re pretty Agile!”  After all, Agile is a Zen journey.  It’s a destination that you aim for, not force, and even if you never reach true “enlightenment” that doesn’t mean your team can’t be exponentially better off from merely taking the journey.

  Read the article

• SQL Developer at Oracle Open World 2012

  - by thatjeffsmith

  We have a lot going on in San Francisco this fall. One of the most personal exciting bits, for what will be my 4th or 5th Open World, is that this will be my FIRST as a member of Team Oracle. I’ve presented once before, but most years it was just me pressing flesh at the vendor booths. After 3-4 days of standing and talking, you’re ready to just go home and not do anything for a few weeks. This time I’ll have a chance to walk around and talk with our users and get a good idea of what’s working and what’s not. Of course it will be a great opportunity for you to find us and get to know your SQL Developer team! 3.4 miles across and back – thanks Ashley for signing me up for the run! This year is going to be a bit crazy. Work wise I’ll be presenting twice, working a booth, and proctoring several of our Hands-On Labs. The fun parts will be equally crazy though – running across the Bay Bridge (I don’t run), swimming the Bay (I don’t swim), having my wife fly out on Wednesday for the concert, and then our first WhiskyFest on Friday (I do drink whisky though.) But back to work – let’s talk about EVERYTHING you can expect from the SQL Developer team. Booth Hours We’ll have 2 ‘demo pods’ in the Exhibition Hall over at Moscone South. Look for the farm of Oracle booths, we’ll be there under the signs that say ‘SQL Developer.’ There will be several people on hand, mostly developers (yes, they still count as people), who can answer your questions or demo the latest features. Come by and say ‘Hi!’, and let us know what you like and what you think we can do better. Seriously. Monday 10AM – 6PM Tuesday 9:45AM – 6PM Wednesday 9:45AM – 4PM Presentations Stop by for an hour, pull up a chair, sit back and soak in all the SQL Developer goodness. You’ll only have to suffer my bad jokes for two of the presentations, so please at least try to come to the other ones. We’ll be talking about data modeling, migrations, source control, and new features in versions 3.1 and 3.2 of SQL Developer and SQL Developer Data Modeler. Day Time Event Monday 10:454:45 What’s New in SQL Developer Why Move to Oracle Application Express Listener Tueday 10:1511:455:00 Using Subversion in Oracle SQL Developer Data Modeler Oracle SQL Developer Tips & Tricks Database Design with Oracle SQL Developer Data Modeler Wednesday 11:453:30 Migrating Third-Party Databases and Applications to Oracle Exadata 11g Enterprise Options and Management Packs for Developers Hands On Labs (HOLs) The Hands On Labs allow you to come into a classroom environment, sit down at a computer, and run through some exercises. We’ll provide the hardware, software, and training materials. It’s self-paced, but we’ll have several helpers walking around to answer questions and chat up any SQL Developer or database topic that comes to mind. If your employer is sending you to Open World for all that great training, the HOLs are a great opportunity to capitalize on that. They are only 60 minutes each, so you don’t have to worry about burning out. And there’s no homework! Of course, if you do want to take the labs home with you, many are already available via the Developer Day Hands-On Database Applications Developer Lab. You will need your own computer for those, but we’ll take care of the rest. Wednesday PL/SQL Development and Unit Testing with Oracle SQL Developer 10:15 Performance Tuning with Oracle SQL Developer 11:45 Thursday The Soup to Nuts of Data Modeling with Oracle SQL Developer Data Modeler 11:15 Some Parting Advice Always wanted to meet your favorite Oracle authors, speakers, and thought-leaders? Don’t be shy, walk right up to them and introduce yourself. Normal social rules still apply, but at the conference everyone is open and up for meeting and talking with attendees. Just understand if there’s a line that you might only get a minute or two. It’s a LONG conference though, so you’ll have plenty of time to catch up with everyone. If you’re going to be around on Tuesday evening, head on over to the OTN Lounge from 4:30 to 6:30 and hang out for our Tweet Meet. That’s right, all the Oracle nerds on Twitter will be there in one place. Be sure to put your Twitter handle on your name tag so we know who you are!

  Read the article

• Interview with Tomas Ulin at the MySQL Innovation Day

  - by Monica Kumar

  MySQL Innovation Day held on June 5, 2012 was a great event for the MySQL engineers, users and customers to gather, share and network. I was able to get a few minutes with Tomas Ulin, Vice President of MySQL Engineering at Oracle, to ask him some questions. Here are the highlights of my interview with Tomas. Monica: This was the first MySQL Innovation Day, correct?  Why now, what was the strategy behind hosting this kind of event? Tomas: In the last year, we have rolled out an incredible number of MySQL events worldwide – some targeted at developers that are new to MySQL and others for the MySQL savvy. At the MySQL Innovation Day, our first event of this kind,, we had a number of our key engineers presenting lightning talks delivering previews of key new features as well as discussing roadmap. Our goal is to keep an open dialogue with the MySQL community. In fact, we are hosting a two-day conference, another first, for the MySQL community called MySQL Connect on Sept. 29-30 in San Francisco. If you attended the MySQL Innovation Day and liked what we did, you are going to love MySQL Connect. We’ll have a lot more of our engineers and many users and community members presenting hour long sessions and hands on labs. Our engineers will be presenting new MySQL features as well offer previews of upcoming enhancements. Monica: What's the big take-away from today's MySQL Innovation Day? Tomas: I hope the most important takeaway for attendees was to see that Oracle has been driving, and continues to drive MySQL innovation with a steady stream of new great GA and Development Milestone releases. Monica: What were attendees most interested in? What feedback did they have? Tomas: Feedback from attendees was incredibly positive and encouraging. In particular, they liked the interaction with the MySQL engineers and were also excited about the new early access features in MySQL 5.6 and MySQL Cluster 7.3. In addition, sessions delivered by MySQL users like Facebook, Pinterest and Twitter were very well received. For example, Pinterest talked about using MySQL to scale from 0 to billions of page views/month, Twitter talked about “Scaling twitter with MySQL” and Facebook discussed the many options to implement MySQL master failover solutions. The presentations are already available for download while some of the session videos will be made available on the MySQL Innovation Day web page shortly. Monica: How would you distinguish the use of MySQL vs. Oracle Database? What key factors should customers consider? Tomas: MySQL and Oracle Database complement each other. They are very different products, best suited to different use cases. Customers can choose world-class solutions from Oracle to fulfill a variety of needs. MySQL is a great choice for enterprise web-based, custom and embedded apps. Oracle Database is the leading choice for enterprise packaged applications such as ERP, CRM as well as high-end data warehousing and business intelligence applications. Monica: What are the highlights of the current MySQL 5.6 Development Milestone Release and early access features for MySQL Cluster 7.3? Tomas: MySQL 5.6 development milestone release builds on MySQL 5.5 by improving: Optimizer for better Performance, Scalability Performance Schema for better instrumentation InnoDB for better transactional throughput Replication for higher availability, data integrity NoSQL options for more flexibility We announced some new early access features in MySQL 5.6, including binary log group commit. We also announced early access features in MySQL Cluster 7.3 including support for foreign key constraints. Monica: How do people get these releases? Tomas: You can access development milestone releases by going to: http://dev.mysql.com/downloads/mysqlThen select the “Development Release” tab. The MySQL Cluster 7.3 and other early access features can be downloaded at: http://labs.mysql.com Monica: What's coming up next for MySQL? Tomas: Our development team is working in overdrive, cranking out new features with community feedback. Don’t miss the MySQL Connect conference being held in San Francisco on Sept. 29 and 30th. My team and I will be there. I hope you can join us! Monica: Thank you for your time, Tomas. I look forward to seeing you at the MySQL Connect conference. To our followers, I hope you found this interview informative. I welcome your comments. Please stay tuned here for more updates on MySQL. Note: Monica Kumar is Senior Director of product marketing for Linux, Virtualization and MySQL at Oracle.

  Read the article

• Feedback on "market manipulation", a peripheral game mechanic for a satirical MMO

  - by BerndBrot

  This question asks for feedback on a specific game-mechanic. Since there is not one right feedback on a game mechanic, I tried to provide enough context and guidelines to still make it possible for users to rate answers and to accept an answer as the best answer (following these criteria from Writer.SE's meta website). Please comment if you have any suggestions on how I could improve the question in that regard. So, let's begin with the game itself and some of its elements which are relevant for this question. Context I'm working on a satirical, text-based multiplayer adventure and role-playing game set in modern-day London. The game resolves around the concept of sin and features a myriad of (venomous) allusions to all the things that go wrong in this world. Players can choose between character classes like bullshit artist (consultant), bankster, lawyer, mobster, celebrity, politician, etc. In order to complete the game, the player has to live so sinfully with regard to any of the seven deadly sins that a demon is willing to offer them a contract of sponsorship. On their quest to live a sinful live, characters explore more and more locations of modern-day London (on a GoogleMap), fight "monsters" like insurance sales agents or Jehovah's Witnesses, and complete quests, like building a PowerPoint presentation out of marketing buzz words or keeping up a number of substance abuse effects in order to progress on the gluttony path. Battles are turn based with both combatants having a deck of cards, with which they try to make their enemy give in to temptations of all sorts. Tempted enemies sometimes become contacts (an item drop mechanic), which can be exploited for various benefits, depending on their area of influence (finance, underworld, bureaucracy, etc.), level of influence, and kind of sway that the player has over them (bribed, seduced, threatened, etc.) Once a contract has been exploited, the player loses that contact. Most actions require turns. Turns are limited, but refill each day. Criteria A number of peripheral game mechanics are supposed to represent real world abuses and mischief in a humorous way integrate real world data and events to strengthen the feeling of relevance of the game's humor with regard to real world problems add fun ways of interacting with other players add ways for players to express themselves through game-play Market manipulation is one such peripheral game mechanic and should fulfill all of these goals. Market manipulation This is my initial design of the mechanic: Players can enter the London Stock Exchange (LSE) (without paying a turn) LSE displays the stock prices of a number of companies in industries like weapons or tobacco as well as some derivatives based on wheat and corn. The stock prices are calculated based on the actual stock prices of these companies and derivatives (in real time) any market manipulations that were conducted by the players any market corrections of the system Players can buy and sell shares with cash, a resource in the game, at current in-game market value (without paying a turn). Players can manipulate the market, i.e. let the price of a share either rise or fall, by some amount, over a certain period of time. Manipulating the market requires 1 turn A contact in the financial sector (see above). The higher the level of influence of the contact, the stronger the effect of the manipulation on the stock price, and/or the shorter it takes for the manipulation to manifest itself. Market manipulation also adds a crime to the player's record. (There are a multitude of ways to take care of that, but it is still another "cost" of market manipulations.) The system continuously corrects market manipulations by letting the in-game prices converge towards their real world counterparts at a rate of 2% of the difference between the two per hour. Because of this market correction mechanism, pushing up prices (and screwing down prices) becomes increasingly difficult the higher (lower) the price already is. Whenever food prices reach a certain level, in-game stories are posted about hunger catastrophes happening somewhere far, far away (maybe with links to real world news stories). Whenever a player sells a certain number of shares with a sufficiently high margin, they are mentioned in that day's in-game financial news. Since the number of stock options is very limited, players will inevitably collide in their efforts to manipulate the market in their favor. Hopefully, it will also be a fun side-arena for guilds and covenants to fight each other. Question(s) What do you think of this mechanism given the criteria for peripheral game mechanics that I specified for my game? Do you have any ideas how the mechanic could be improved with regard to these criteria (or otherwise)? Could it be improved to allow for more expressive game-play, or involve an allusion to some other real world madness (like short selling, leveraging, or some other banking magic)? Are there any game-theoretic problems with this mechanic, like maybe certain dominant individual strategies that, collectively, lead to every player profiting and thus eliminating the idea of market manipulation PVP? Also, if you like (or dislike) this question, feel free to participate in the discussion on GDSE meta: "Should we be more lax with regard to SE's question/answer format to make game design questions possible?"

  Read the article

• SQLAuthority News – Meeting with Allen Bailochan Tuladhar – An Unlimited Experience

  - by pinaldave

  Allen  Tuladhar I recently came back from my 9-day trip in Nepal and I must say that this is one of the best trips I had in my lifetime. Allen Bailochan Tuladhar is a wonderful person and an extreme enthusiast for Microsoft Technology. Allen is the Chief Executive Officer of Unlimited Technologies Pvt Ltd., Country Manager of Microsoft MDP Nepal, the Member Secretary of Nepali Language in Information Technology, and member of the Steering Committee of the Government of Nepal. He is the person who keeps the Nepal’s Tech Community constantly motivating and taking it to the next level. I have met Allen for many times before, but this was the first time I was with him in Kathmandu, Nepal. I was very impressed with the amount of the work he does in the community. During my 9 days of stay, every single day was a new lesson for me. I was amazed and overwhelmed with the many things he does every single day. Not only he does he work closely with Government of Nepal ministry, but he is also the most known person in the Student Community. His expertise in the technical subject matter is not limited to one technology; rather, I have seen him actively engaging himself in  discussions of various tech topics. Allen presending at TechMela Kathmandu, Nepal Allen is currently active in working out to localize Windows and Office and incorporate it using the Nepali language. I was able to witness and experience how the localization works, as well as the procedure on how to do such. If you know the whole localization process, you must have realized how big and daunting of a process it is. I was glad that I became a part of it. Prominent Personality of Nepal on Panel Discussion Another great opportunity I had when I was at Allen’s office is that I have learned how the radio technology talk show works. Nepali Radio station has the weekly program in their local language, in which MS technology is discussed and industry leaders are invited to talk about their experience with the technology. I found the program so interesting because it has so much variety in terms of technology subjects. Well, my understanding of Nepali language is limited but I did understand quite a bit. Ravi, Nutan, Pinal, Gandip I got the chance to meet lots of Database Professionals as well. People in Nepal are very polite even though they are very strong in their technology fundamentals. I had in-depth discussion regarding High Availability scenarios, as well Query Tuning. Database professionals from the leading financial sectors of Nepal wanted me to visit their Data Center and help them out with a few advances. In no time, Allen organized a visit for me. He sent me a Nepali-speaking expert from his own organization to accompany me in overcoming any difficulties while I was on my way helping this financial district. Pinal (SQLAuthority) and Deependra (Unlimited) When I was going to Nepal, I was really not sure if I would be able to stay busy for 9 days straight in Community-related activity. However, on the 9th day I realize that I can still stay here for more than 9 days because in every single day, I feel enthusiastic enough to do something new. Allen Bailochan Tuladhar Even though I was working  very hard every day, I hardly had the chance to work with and talk to him one-on-one for the first few days. One of the evenings, Allen invited me to his home and we discussed about his future ideas. I was really surprised to see how much a man can do for his technical community and for his country. When I asked Allen’s wife and daughter if they ever think it’s getting too much with regards to Allen putting tough efforts to the community, their answer was something I did not expect. I found out that Allen’s wife manages all the back office and logistics of the community events and his daughter manages the websites. I felt that they do not have any complain,  and instead, their whole family is in this activity as deeply as it can get, which I thought is a very good thing. Pinal and Allen I want to end this post with an interesting story that happened during our lunch hour at one of the Nepali restaurants. While we were having our lunch and having some chitchat, Allen suddenly stood up and called several people walking along the pavement. He introduced them all to me as Microsoft Student Partners. He asked all of them to order their favorite dish and called the waiter to inform that he will pick up their tab. Figuring out the question written on my face, he just said one sentence: “They are all future technology professionals who are going to make all of us proud.” I guess I have a lot of things to learn. Hats off to Allen! Pinal and Allen at Microsoft MDP Unlimited Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology

  Read the article

• Request Limit Length Limits for IIS&rsquo;s requestFiltering Module

  - by Rick Strahl

  Today I updated my CodePaste.net site to MVC 3 and pushed an update to the site. The update of MVC went pretty smooth as well as most of the update process to the live site. Short of missing a web.config change in the /views folder that caused blank pages on the server, the process was relatively painless. However, one issue that kicked my ass for about an hour – and not foe the first time – was a problem with my OpenId authentication using DotNetOpenAuth. I tested the site operation fairly extensively locally and everything worked no problem, but on the server the OpenId returns resulted in a 404 response from IIS for a nice friendly OpenId return URL like this: http://codepaste.net/Account/OpenIdLogon?dnoa.userSuppliedIdentifier=http%3A%2F%2Frstrahl.myopenid.com%2F&dnoa.return_to_sig_handle=%7B634239223364590000%7D%7BjbHzkg%3D%3D%7D&dnoa.return_to_sig=7%2BcGhp7UUkcV2B8W29ibIDnZuoGoqzyS%2F%2FbF%2FhhYscgWzjg%2BB%2Fj10ZpNdBkUCu86dkTL6f4OK2zY5qHhCnJ2Dw%3D%3D&openid.assoc_handle=%7BHMAC-SHA256%7D%7B4cca49b2%7D%7BMVGByQ%3D%3D%7D&openid.claimed_id=http%3A%2F%2Frstrahl.myopenid.com%2F&openid.identity=http%3A%2F%2Frstrahl.myopenid.com%2F&openid.mode=id_res&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.ns.sreg=http%3A%2F%2Fopenid.net%2Fextensions%2Fsreg%2F1.1&openid.op_endpoint=http%3A%2F%2Fwww.myopenid.com%2Fserver&openid.response_nonce=2010-10-29T04%3A12%3A53Zn5F4r5&openid.return_to=http%3A%2F%2Fcodepaste.net%2FAccount%2FOpenIdLogon%3Fdnoa.userSuppliedIdentifier%3Dhttp%253A%252F%252Frstrahl.myopenid.com%252F%26dnoa.return_to_sig_handle%3D%257B634239223364590000%257D%257BjbHzkg%253D%253D%257D%26dnoa.return_to_sig%3D7%252BcGhp7UUkcV2B8W29ibIDnZuoGoqzyS%252F%252FbF%252FhhYscgWzjg%252BB%252Fj10ZpNdBkUCu86dkTL6f4OK2zY5qHhCnJ2Dw%253D%253D&openid.sig=h1GCSBTDAn1on98sLA6cti%2Bj1M6RffNerdVEI80mnYE%3D&openid.signed=assoc_handle%2Cclaimed_id%2Cidentity%2Cmode%2Cns%2Cns.sreg%2Cop_endpoint%2Cresponse_nonce%2Creturn_to%2Csigned%2Csreg.email%2Csreg.fullname&openid.sreg.email=rstrahl%40host.com&openid.sreg.fullname=Rick+Strahl A 404 of course isn’t terribly helpful – normally a 404 is a resource not found error, but the resource is definitely there. So how the heck do you figure out what’s wrong? If you’re just interested in the solution, here’s the short version: IIS by default allows only for a 1024 byte query string, which is obviously exceeded by the above. The setting is controlled by the RequestFiltering module in IIS 6 and later which can be configured in ApplicationHost.config (in \%windir\system32\inetsvr\config). To set the value configure the requestLimits key like so: <configuration> <security> <requestFiltering> <requestLimits maxQueryString="2048"> </requestLimits> </requestFiltering> </security> </configuration> This fixed me right up and made the requests work. How do you find out about problems like this? Ah yes the troubles of an administrator? Read on and I’ll take you through a quick review of how I tracked this down. Finding the Problem The issue with the error returned is that IIS returns a 404 Resource not found error and doesn’t provide much information about it. If you’re lucky enough to be able to run your site from the localhost IIS is actually very helpful and gives you the right information immediately in a nicely detailed error page. The bottom of the page actually describes exactly what needs to be fixed. One problem with this easy way to find an error: You HAVE TO run localhost. On my server which has about 10 domains running localhost doesn’t point at the particular site I had problems with so I didn’t get the luxury of this nice error page. Using Failed Request Tracing to retrieve Error Info The first place I go with IIS errors is to turn on Failed Request Tracing in IIS to get more error information. If you have access to the server to make a configuration change you can enable Failed Request Tracing like this: Find the Failed Request Tracing Rules in the IIS Service Manager.   Select the option and then Edit Site Tracing to enable tracing. Then add a rule for * (all content) and specify status codes from 100-999 to capture all errors. if you know exactly what error you’re looking for it might help to specify it exactly to keep the number of errors down. Then run your request and let it fail. IIS will throw error log files into a folder like this C:\inetpub\logs\FailedReqLogFiles\W3SVC5 where the last 5 is the instance ID of the site. These files are XML but they include an XSL stylesheet that provides some decent formatting. In this case it pointed me straight at the offending module:   Ok, it’s the RequestFilteringModule. Request Filtering is built into IIS 6-7 and configured in ApplicationHost.config. This module defines a few basic rules about what paths and extensions are allowed in requests and among other things how long a query string is allowed to be. Most of these settings are pretty sensible but the query string value can easily become a problem especially if you’re dealing with OpenId since these return URLs are quite extensive. Debugging failed requests is never fun, but IIS 6 and forward at least provides us the tools that can help us point in the right direction. The error message the FRT report isn’t as nice as the IIS error message but it at least points at the offending module which gave me the clue I needed to look at request restrictions in ApplicationHost.config. This would still be a stretch if you’re not intimately familiar, but I think with some Google searches it would be easy to track this down with a few tries… Hope this was useful to some of you. Useful to me to put this out as a reminder – I’ve run into this issue before myself and totally forgot. Next time I got it, right?© Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  Security  

  Read the article

• Protecting offline IRM rights and the error "Unable to Connect to Offline database"

  - by Simon Thorpe

  One of the most common problems I get asked about Oracle IRM is in relation to the error message "Unable to Connect to Offline database". This error message is a result of how Oracle IRM is protecting the cached rights on the local machine and if that cache has become invalid in anyway, this error is thrown. Offline rights and security First we need to understand how Oracle IRM handles offline use. The way it is implemented is one of the main reasons why Oracle IRM is the leading document security solution and demonstrates our methodology to ensure that solutions address both security and usability and puts the balance of these two in your control. Each classification has a set of predefined roles that the manager of the classification can assign to users. Each role has an offline period which determines the amount of time a user can access content without having to communicate with the IRM server. By default for the context model, which is the classification system that ships out of the box with Oracle IRM, the offline period for each role is 3 days. This is easily changed however and can be as low as under an hour to as long as years. It is also possible to switch off the ability to access content offline which can be useful when content is very sensitive and requires a tight leash. So when a user is online, transparently in the background, the Oracle IRM Desktop communicates with the server and updates the users rights and offline periods. This transparent synchronization period is determined by the server and communicated to all IRM Desktops and allows for users rights to be kept up to date without their intervention. This allows us to support some very important scenarios which are key to a successful IRM solution. A user doesn't have to make any decision when going offline, they simply unplug their laptop and they already have their offline periods synchronized to the maximum values. Any solution that requires a user to make a decision at the point of going offline isn't going to work because people forget to do this and will therefore be unable to legitimately access their content offline. If your rights change to REMOVE your access to content, this also happens in the background. This is very useful when someone has an offline duration of a week and they happen to make a connection to the internet 3 days into that offline period, the Oracle IRM Desktop detects this online state and automatically updates all rights for the user. This means the business risk is reduced when setting long offline periods, because of the daily transparent sync, you can reflect changes as soon as the user is online. Of course, if they choose not to come online at all during that week offline period, you cannot effect change, but you take that risk in giving the 7 day offline period in the first place. If you are added to a NEW classification during the day, this will automatically be synchronized without the user even having to open a piece of content secured against that classification. This is very important, consider the scenario where a senior executive downloads all their email but doesn't open any of it. Disconnects the laptop and then gets on a plane. During the flight they attempt to open a document attached to a downloaded email which has been secured against an IRM classification the user was not even aware they had access to. Because their new role in this classification was automatically synchronized their experience is a good one and the document opens. More information on how the Oracle IRM classification model works can be found in this article by Martin Abrahams. So what about problems accessing the offline rights database? So onto the core issue... when these rights are cached to your machine they are stored in an encrypted database. The encryption of this offline database is keyed to the instance of the installation of the IRM Desktop and the Windows user account. Why? Well what you do not want to happen is for someone to get their rights for content and then copy these files across hundreds of other machines, therefore getting access to sensitive content across many environments. The IRM server has a setting which controls how many times you can cache these rights on unique machines. This is because people typically access IRM content on more than one computer. Their work desktop, a laptop and often a home computer. So Oracle IRM allows for the usability of caching rights on more than one computer whilst retaining strong security over this cache. So what happens if these files are corrupted in someway? That's when you will see the error, Unable to Connect to Offline database. The most common instance of seeing this is when you are using virtual machines and copy them from one computer to the next. The virtual machine software, VMWare Workstation for example, makes changes to the unique information of that virtual machine and as such invalidates the offline database. How do you solve the problem? Resolution is however simple. You just delete all of the offline database files on the machine and they will be recreated with working encryption when the Oracle IRM Desktop next starts. However this does mean that the IRM server will think you have your rights cached to more than one computer and you will need to rerequest your rights, even though you are only going to be accessing them on one. Because it still thinks the old cache is valid. So be aware, it is good practice to increase the server limit from the default of 1 to say 3 or 4. This is done using the Enterprise Manager instance of IRM. So to delete these offline files I have a simple .bat file you can use; Download DeleteOfflineDBs.bat Note that this uses pskillto stop the irmBackground.exe from running. This is part of the IRM Desktop and holds open a lock to the offline database. Either kill this from task manager or use pskillas part of the script.

  Read the article

• SharePoint Saturday Michigan 2010 Recap, Slides, and Photos

  - by Brian Jackett

  This past weekend I attended SharePoint Saturday Michigan (SPSMI) in Ann Arbor, Michigan.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my third SharePoint Saturday attended and second I’ve spoken at.  I believe today it was announced that about 210 people total attended the event.  I was very happy with the turnout, especially the ratio of male to female attendees.  Typically with computer related conferences the ratio leans towards more males attending, but both Peter Serzo (one of conference organizers) and I both commented to each other that at the end of the day it appeared to be close to 40% women in the crowd.  So here’s my recap of the weekend. Arrival     Friday afternoon I drove up from Columbus, OH to Ann Arbor, MI and arrived around 4pm.  I was attempting to avoid the rush hour traffic and construction backups.  Turned out to be a good idea because other speakers coming up Friday got stuck on a highway which literally closed down in both directions due to a bad accident.  I was talking my friend Sean McDonough through the highway closing and this was the first time I had seen a solid black traffic line on Google Maps.  Most of us are familiar with Green, Yellow, and Red, but this line was black if that tells you how bad it got. Speaker “Dinner”     Fast forward a few hours and it was time for the speaker “dinner.”  I put “dinner” in quotes because with this night alone SPSMI set a new bar for nicest and most extravagant speaker appreciation events for SharePoint Saturday.  By tapping into some very influential contacts, the conference organizers were able to provide a truck limo (yep you heard right) with refreshments, access to an underground suite at the Palace of Auburn Hills, and courtside tickets to see the Detroit Pistons play that night.  Being a Michigan native I have to say that I was absolutely floored by this experience and very thankful to our conference organizers Peter, Sebastian, and Jesse along with Trillium Teamologies. Sessions     The actual conference started Saturday morning at 9am with the keynote by Rob Collie who is the Microsoft program manager for PowerPivot.  The day continued and I attended the following sessions: Mike Watson (@mikewat) – “SharePoint 2010 Fight Night: Devs vs. Admins” Karl Swedeberg (@kswedberg) – “A Walk on the Client Side with jQuery“ [my session] Brian Jackett (@briantjackett) - “Real World Deployment of SharePoint 2007 Solutions” Jeff Willinger (@jwillie) - “Social Computing and Collaboration Inside and Outside the 4 Walls” Paul Schaeflein (@paulschaeflein) – “PowerShell for the SharePoint Developer” My Presentation     I had a great time presenting my session on Deploying SharePoint 2007 Solutions, but it wasn’t without its fair share of technical issues.  As my session was right after lunch I came in to my room 10 mins early to set up my laptop, slides, and demos.  As a quick background note, a few months ago I got an upgraded laptop from my company Sogeti and have been dual booting it between XP (factory installed) and Windows Server 2008 R2 w/ Hyper-V.  As such I had prepared all of my demo virtual machines to run under Hyper-V.  About 3 minutes before my session was scheduled to start though it became apparent that I did not have the correct display drivers to connect Windows Server 2008 R2 to the projector…     As you can imagine this was a slight cause for concern as I was potentially going to be unable to give my presentation.  Luckily for me I usually prepare for such unforeseen issues and had my presentation and some spare VMs that would run on XP on my external hard drive.  Knowing this I rebooted my machine into XP and began my presentation without slides until about 5 mins into the session when everything was up and running on XP.  Despite this being the first time I gave this presentation I have to say it was one of my favorites I’ve given so far.  The audience was very engaged in the session and I received some great, positive feedback afterwards.  Thanks to all who attended my session, I appreciate it very much. Link to Presentation Files     For those of you who attended my session and would like my slides or demo PowerShell scripts they can be found on my SkyDrive at the link below.  Also, if you have a few minutes and wouldn’t mind rating my session I have this session posted on SpeakerRate.  As speakers we always appreciate any and all feedback attendees offer, so thank you if you are able to provide any. SkyDrive folder with session files Rate my SharePoint 2007 Solutions session   Picture Albums     For everyone else, here are my pictures from the weekend.  The first link is to my FaceBook album which will have tagging (recommend this one.)  The second is to my Live album if you care for higher resolution images. http://www.facebook.com/album.php?aid=2154482&id=21905041&l=a3fb72ee8c View Full Album Conclusion     A big thank you goes out to all of the organizers, speakers, sponsors, and attendees of SPSMI.  As I’ve said so many times, without each and every one of you these events wouldn’t be possible.  I thoroughly enjoyed this trip back to my home state and presenting a new session.  For those interested in my upcoming schedule I will be giving two sessions on PowerShell at SharePoint Saturday Charlotte in April, helping plan Stir Trek: Iron Man Edition in May, and I’m submitting sessions to Day of .Net Ann Arbor in May as well.  Beyond that I haven’t planned out any travels.  Thanks for reading my recap.  Look forward to more technical posts now that I have a short break in conferences.         -Frog Out   links: Michigan image

  Read the article

• Good ol fashioned debugging

  - by Tim Dexter

  I have been helping out one of our new customers over the last day or two and I have even managed to get to the bottom of their problem FTW! They use BIEE and BIP and wanted to mount a BIP report in a dashboard page, so far so good, BIP does that! Just follow the instructions in the BIEE user guide. The wrinkle is that they want to enter some fixed instruction strings into the dashboard prompts to help the user. These are added as fixed values to the prompt as the default values so they appear first. Once the user makes a selection, the default strings disappear. Its a fair requirement but the BIP report chokes Now, the BIP report had been setup with the Autorun checkbox, unchecked. I expected the BIP report to wait for the Go button to be hit but it was trying to run immediately and failing. That was the first issue. You can not stop the BIP report from trying to run in a dashboard. Even if the Autorun is turned off, it seems that dashboard still makes the request to BIP to run the report. Rather than BIP refusing because its waiting for input it goes ahead anyway, I guess the mechanism does not check the autorun flag when the request is coming from the dashboard. It appears that between BIEE and BIP, they collectively ignore the autorun flag. A bug? might be, at least an enhancement request. With that in mind, how could we get BIP to not at least not fail? This fact was stumping me on the parameter error, if the autorun flag was being respected then why was BIP complaining about the parameter values it should not even be doing anything until the Go button is clicked. I now knew that the autorun flag was being ignored, it was a simple case of putting BIP into debug mode. I use the OC4J server on my laptop so debug msgs are routed through the dos box used to start the OC4J container. When I changed a value on the dashboard prompt I spotted some debug text rushing by that subsequently disappeared from the log once the operation was complete. Another bug? I needed to catch that text as it went by, using the print screen function with some software to grab multiple screens as the log appeared and then disappeared. The upshot is that when you change the dashboard prompt value, BIP validates the value against its own LOVs, if its not in the list then it throws the error. Because 'Fill this first' and 'Fill this second' ie fixed strings from the dashboard prompts, are not in the LOV lists and because the report is auto running as soon as the dashboard page is brought up, the report complains about invalid parameters. To get around this, I needed to get the strings into the LOVs. Easily done with a UNION clause: select 'Fill this first' from SH.Products Products UNION select Products."Prod Category" as "Prod Category" from SH.Products Products Now when BIP wants to validate the prompt value, the LOV query fires and finds the fixed string -> No Error. No data, but definitely no errors :0) If users do run with the fixed values, you can capture that in the template. If there is no data in the report, either the fixed values were used or the parameters selected resulted in no rows. You can capture this in the template and display something like. 'Either your parameter values resulted in no data or you have not changed the default values' Thats the upside, the downside is that if your users run the report in the BP UI they re going to see the fixed strings. You could alleviate that by having BIP display the fixed strings in top of its parameter drop boxes (just set them as the default value for the parameter.) But they will not disappear like they do in the dashboard prompts, see below. If the expected autorun behaviour worked ie wait for the Go button, then we would not have to workaround it but for now, its a pretty good solution. It was an enjoyable hour or so for me, took me back to my developer daze, when we used to race each other for the most number of bug fixes. I used to run a distant 2nd behind 'Bugmeister Chen Hu' but led the chasing pack by a reasonable distance.

  Read the article

• An MCM exam, Rob? Really?

  - by Rob Farley

  I took the SQL 2008 MCM Knowledge exam while in Seattle for the PASS Summit ten days ago. I wasn’t planning to do it, but I got persuaded to try. I was meaning to write this post to explain myself before the result came out, but it seems I didn’t get typing quickly enough. Those of you who know me will know I’m a big fan of certification, to a point. I’ve been involved with Microsoft Learning to help create exams. I’ve kept my certifications current since I first took an exam back in 1998, sitting many in beta, across quite a variety of topics. I’ve probably become quite good at them – I know I’ve definitely passed some that I really should’ve failed. I’ve also written that I don’t think exams are worth studying for. (That’s probably not entirely true, but it depends on your motivation. If you’re doing learning, I would encourage you to focus on what you need to know to do your job better. That will help you pass an exam – but the two skills are very different. I can coach someone on how to pass an exam, but that’s a different kind of teaching when compared to coaching someone about how to do a job. For example, the real world includes a lot of “it depends”, where you develop a feel for what the influencing factors might be. In an exam, its better to be able to know some of the “Don’t use this technology if XYZ is true” concepts better.) As for the Microsoft Certified Master certification… I’m not opposed to the idea of having the MCM (or in the future, MCSM) cert. But the barrier to entry feels quite high for me. When it was first introduced, the nearest testing centres to me were in Kuala Lumpur and Manila. Now there’s one in Perth, but that’s still a big effort. I know there are options in the US – such as one about an hour’s drive away from downtown Seattle, but it all just seems too hard. Plus, these exams are more expensive, and all up – I wasn’t sure I wanted to try them, particularly with the fact that I don’t like to study. I used to study for exams. It would drive my wife crazy. I’d have some exam scheduled for some time in the future (like the time I had two booked for two consecutive days at TechEd Australia 2005), and I’d make sure I was ready. Every waking moment would be spent pouring over exam material, and it wasn’t healthy. I got shaken out of that, though, when I ended up taking four exams in those two days in 2005 and passed them all. I also worked out that if I had a Second Shot available, then failing wasn’t a bad thing at all. Even without Second Shot, I’m much more okay about failing. But even just trying an MCM exam is a big effort. I wouldn’t want to fail one of them. Plus there’s the illusion to maintain. People have told me for a long time that I should just take the MCM exams – that I’d pass no problem. I’ve never been so sure. It was almost becoming a pride-point. Perhaps I should fail just to demonstrate that I can fail these things. Anyway – boB Taylor (@sqlboBT) persuaded me to try the SQL 2008 MCM Knowledge exam at the PASS Summit. They set up a testing centre in one of the room there, so it wasn’t out of my way at all. I had to squeeze it in between other commitments, and I certainly didn’t have time to even see what was on the syllabus, let alone study. In fact, I was so exhausted from the week that I fell asleep at least once (just for a moment though) during the actual exam. Perhaps the questions need more jokes, I’m not sure. I knew if I failed, then I might disappoint some people, but that I wouldn’t’ve spent a great deal of effort in trying to pass. On the other hand, if I did pass I’d then be under pressure to investigate the MCM Lab exam, which can be taken remotely (therefore, a much smaller amount of effort to make happen). In some ways, passing could end up just putting a bunch more pressure on me. Oh, and I did.

  Read the article

• HTG Explains: Why is Printer Ink So Expensive?

  - by Chris Hoffman

  Printer ink is expensive, more expensive per drop than fine champagne or even human blood. If you haven’t gone paperless, you’ll notice that you’re paying a lot for new ink cartridges — more than seems reasonable. Purchasing the cheapest inkjet printer and buying official ink cartridge replacements is the most expensive thing you can do. There are ways to save money on ink if you must continue to print documents. Cheap Printers, Expensive Ink Ink jet printers are often very cheap. That’s because they’re sold at cost, or even at a loss — the manufacturer either makes no profit from the printer itself or loses money. The manufacturer will make most of its money from the printer cartridges you buy later. Even if the company does make a bit of money from each printer sold, it makes a much larger profit margin on ink. Rather than selling you a printer that may be rather expensive, they want to sell you a cheap printer and make money on an ongoing basis by providing expensive printer ink. It’s been compared to the razor model — sell a razor cheaply and mark up the razor blades. Rather than making a one-time profit on the razor, you’ll make continuing profit as the customer keeps buying razor blade replacements — or ink, in this case. Many printer manufacturers go out of their way to make it difficult for you to use unofficial ink cartridges, building microchips into their official ink cartridges. If you use an unofficial cartridge or refill an official cartridge, the printer may refuse to use it. Lexmark once argued in court that unofficial microchips that enable third-party ink cartridges would violate their copyright and Lexmark has argued that creating an unofficial microchip to bypass this restriction on third-party ink would violate Lexmark’s copyright and be illegal under the US DMCA. Luckily, they lost this argument. What Printer Companies Say Printer companies have put forth their own arguments in the past, attempting to justify the high cost of official ink cartridges and microchips that block any competition. In a Computer World story from 2010, HP argued that they spend a billion dollars each year on “ink research and development.” They point out that printer ink “must be formulated to withstand heating to 300 degrees, vaporization, and being squirted at 30 miles per hour, at a rate of 36,000 drops per second, through a nozzle one third the size of a human hair. After all that it must dry almost instantly on the paper.” They also argue that printers have become more efficient and use less ink to print, while third-party cartridges are less reliable. Companies that use microchips in their ink cartridges argue that only the microchip has the ability to enforce an expiration date, preventing consumers from using old ink cartridges. There’s something to all these arguments, sure — but they don’t seem to justify the sky-high cost of printer ink or the restriction on using third-party or refilled cartridges. Saving Money on Printing Ultimately, the price of something is what people are willing to pay and printer companies have found that most consumers are willing to pay this much for ink cartridge replacements. Try not to fall for it: Don’t buy the cheapest inkjet printer. Consider your needs when buying a printer and do some research. You’ll save more money in the long run. Consider these basic tips to save money on printing: Buy Refilled Cartridges: Refilled cartridges from third parties are generally much cheaper. Printer companies warn us away from these, but they often work very well. Refill Your Own Cartridges: You can get do-it-yourself kits for refilling your own printer ink cartridges, but this can be messy. Your printer may refuse to accept a refilled cartridge if the cartridge contains a microchip. Switch to a Laser Printer: Laser printers use toner, not ink cartridges. If you print a lot of black and white documents, a laser printer can be cheaper. Buy XL Cartridges: If you are buying official printer ink cartridges, spend more money each time. The cheapest ink cartridges won’t contain much ink at all, while larger “XL” ink cartridges will contain much more ink for only a bit more money. It’s often cheaper to buy in bulk. Avoid Printers With Tri-Color Ink Cartridges: If you’re printing color documents, you’ll want to get a printer that uses separate ink cartridges for all its colors. For example, let’s say your printer has a “Color” cartridge that contains blue, green, and red ink. If you print a lot of blue documents and use up all your blue ink, the Color cartridge will refuse to function — now all you can do is throw away your cartridge and buy a new one, even if the green and red ink chambers are full. If you had a printer with separate color cartridges, you’d just have to replace the blue cartridge. If you’ll be buying official ink cartridges, be sure to compare the cost of cartridges when buying a printer. The cheapest printer may be more expensive in the long run. Of course, you’ll save the most money if you stop printing entirely and go paperless, keeping digital copies of your documents instead of paper ones. Image Credit: Cliva Darra on Flickr     

  Read the article

• An MCM exam, Rob? Really?

  - by Rob Farley

  I took the SQL 2008 MCM Knowledge exam while in Seattle for the PASS Summit ten days ago. I wasn’t planning to do it, but I got persuaded to try. I was meaning to write this post to explain myself before the result came out, but it seems I didn’t get typing quickly enough. Those of you who know me will know I’m a big fan of certification, to a point. I’ve been involved with Microsoft Learning to help create exams. I’ve kept my certifications current since I first took an exam back in 1998, sitting many in beta, across quite a variety of topics. I’ve probably become quite good at them – I know I’ve definitely passed some that I really should’ve failed. I’ve also written that I don’t think exams are worth studying for. (That’s probably not entirely true, but it depends on your motivation. If you’re doing learning, I would encourage you to focus on what you need to know to do your job better. That will help you pass an exam – but the two skills are very different. I can coach someone on how to pass an exam, but that’s a different kind of teaching when compared to coaching someone about how to do a job. For example, the real world includes a lot of “it depends”, where you develop a feel for what the influencing factors might be. In an exam, its better to be able to know some of the “Don’t use this technology if XYZ is true” concepts better.) As for the Microsoft Certified Master certification… I’m not opposed to the idea of having the MCM (or in the future, MCSM) cert. But the barrier to entry feels quite high for me. When it was first introduced, the nearest testing centres to me were in Kuala Lumpur and Manila. Now there’s one in Perth, but that’s still a big effort. I know there are options in the US – such as one about an hour’s drive away from downtown Seattle, but it all just seems too hard. Plus, these exams are more expensive, and all up – I wasn’t sure I wanted to try them, particularly with the fact that I don’t like to study. I used to study for exams. It would drive my wife crazy. I’d have some exam scheduled for some time in the future (like the time I had two booked for two consecutive days at TechEd Australia 2005), and I’d make sure I was ready. Every waking moment would be spent pouring over exam material, and it wasn’t healthy. I got shaken out of that, though, when I ended up taking four exams in those two days in 2005 and passed them all. I also worked out that if I had a Second Shot available, then failing wasn’t a bad thing at all. Even without Second Shot, I’m much more okay about failing. But even just trying an MCM exam is a big effort. I wouldn’t want to fail one of them. Plus there’s the illusion to maintain. People have told me for a long time that I should just take the MCM exams – that I’d pass no problem. I’ve never been so sure. It was almost becoming a pride-point. Perhaps I should fail just to demonstrate that I can fail these things. Anyway – boB Taylor (@sqlboBT) persuaded me to try the SQL 2008 MCM Knowledge exam at the PASS Summit. They set up a testing centre in one of the room there, so it wasn’t out of my way at all. I had to squeeze it in between other commitments, and I certainly didn’t have time to even see what was on the syllabus, let alone study. In fact, I was so exhausted from the week that I fell asleep at least once (just for a moment though) during the actual exam. Perhaps the questions need more jokes, I’m not sure. I knew if I failed, then I might disappoint some people, but that I wouldn’t’ve spent a great deal of effort in trying to pass. On the other hand, if I did pass I’d then be under pressure to investigate the MCM Lab exam, which can be taken remotely (therefore, a much smaller amount of effort to make happen). In some ways, passing could end up just putting a bunch more pressure on me. Oh, and I did.

  Read the article

• How to restore your production database without needing additional storage

  - by David Atkinson

  Production databases can get very large. This in itself is to be expected, but when a copy of the database is needed the database must be restored, requiring additional and costly storage.  For example, if you want to give each developer a full copy of your production server, you’ll need n times the storage cost for your n-developer team. The same is true for any test databases that are created during the course of your project lifecycle. If you’ve read my previous blog posts, you’ll be aware that I’ve been focusing on the database continuous integration theme. In my CI setup I create a “production”-equivalent database directly from its source control representation, and use this to test my upgrade scripts. Despite this being a perfectly valid and practical thing to do as part of a CI setup, it’s not the exact equivalent to running the upgrade script on a copy of the actual production database. So why shouldn’t I instead simply restore the most recent production backup as part of my CI process? There are two reasons why this would be impractical. 1. My CI environment isn’t an exact copy of my production environment. Indeed, this would be the case in a perfect world, and it is strongly recommended as a good practice if you follow Jez Humble and David Farley’s “Continuous Delivery” teachings, but in practical terms this might not always be possible, especially where storage is concerned. It may just not be possible to restore a huge production database on the environment you’ve been allotted. 2. It’s not just about the storage requirements, it’s also the time it takes to do the restore. The whole point of continuous integration is that you are alerted as early as possible whether the build (yes, the database upgrade script counts!) is broken. If I have to run an hour-long restore each time I commit a change to source control I’m just not going to get the feedback quickly enough to react. So what’s the solution? Red Gate has a technology, SQL Virtual Restore, that is able to restore a database without using up additional storage. Although this sounds too good to be true, the explanation is quite simple (although I’m sure the technical implementation details under the hood are quite complex!) Instead of restoring the backup in the conventional sense, SQL Virtual Restore will effectively mount the backup using its HyperBac technology. It creates a data and log file, .vmdf, and .vldf, that becomes the delta between the .bak file and the virtual database. This means that both read and write operations are permitted on a virtual database as from SQL Server’s point of view it is no different from a conventional database. Instead of doubling the storage requirements upon a restore, there is no ‘duplicate’ storage requirements, other than the trivially small virtual log and data files (see illustration below). The benefit is magnified the more databases you mount to the same backup file. This technique could be used to provide a large development team a full development instance of a large production database. It is also incredibly easy to set up. Once SQL Virtual Restore is installed, you simply run a conventional RESTORE command to create the virtual database. This is what I have running as part of a nightly “release test” process triggered by my CI tool. RESTORE DATABASE WidgetProduction_Virtual FROM DISK=N'D:\VirtualDatabase\WidgetProduction.bak' WITH MOVE N'WidgetProduction' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_WidgetProduction_Virtual.vmdf', MOVE N'WidgetProduction_log' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_log_WidgetProduction_Virtual.vldf', NORECOVERY, STATS=1, REPLACE GO RESTORE DATABASE WidgetProduction_Virtual WITH RECOVERY   Note the only change from what you would do normally is the naming of the .vmdf and .vldf files. SQL Virtual Restore intercepts this by monitoring the extension and applies its magic, ensuring the ‘virtual’ restore happens rather than the conventional storage-heavy restore. My automated release test then applies the upgrade scripts to the virtual production database and runs some validation tests, giving me confidence that were I to run this on production for real, all would go smoothly. For illustration, here is my 8Gb production database: And its corresponding backup file: Here are the .vldf and .vmdf files, which represent the only additional used storage for the new database following the virtual restore.   The beauty of this product is its simplicity. Once it is installed, the interaction with the backup and virtual database is exactly the same as before, as the clever stuff is being done at a lower level. SQL Virtual Restore can be downloaded as a fully functional 14-day trial. Technorati Tags: SQL Server

  Read the article

• How to restore your production database without needing additional storage

  - by David Atkinson

  Production databases can get very large. This in itself is to be expected, but when a copy of the database is needed the database must be restored, requiring additional and costly storage.  For example, if you want to give each developer a full copy of your production server, you'll need n times the storage cost for your n-developer team. The same is true for any test databases that are created during the course of your project lifecycle. If you've read my previous blog posts, you'll be aware that I've been focusing on the database continuous integration theme. In my CI setup I create a "production"-equivalent database directly from its source control representation, and use this to test my upgrade scripts. Despite this being a perfectly valid and practical thing to do as part of a CI setup, it's not the exact equivalent to running the upgrade script on a copy of the actual production database. So why shouldn't I instead simply restore the most recent production backup as part of my CI process? There are two reasons why this would be impractical. 1. My CI environment isn't an exact copy of my production environment. Indeed, this would be the case in a perfect world, and it is strongly recommended as a good practice if you follow Jez Humble and David Farley's "Continuous Delivery" teachings, but in practical terms this might not always be possible, especially where storage is concerned. It may just not be possible to restore a huge production database on the environment you've been allotted. 2. It's not just about the storage requirements, it's also the time it takes to do the restore. The whole point of continuous integration is that you are alerted as early as possible whether the build (yes, the database upgrade script counts!) is broken. If I have to run an hour-long restore each time I commit a change to source control I'm just not going to get the feedback quickly enough to react. So what's the solution? Red Gate has a technology, SQL Virtual Restore, that is able to restore a database without using up additional storage. Although this sounds too good to be true, the explanation is quite simple (although I'm sure the technical implementation details under the hood are quite complex!) Instead of restoring the backup in the conventional sense, SQL Virtual Restore will effectively mount the backup using its HyperBac technology. It creates a data and log file, .vmdf, and .vldf, that becomes the delta between the .bak file and the virtual database. This means that both read and write operations are permitted on a virtual database as from SQL Server's point of view it is no different from a conventional database. Instead of doubling the storage requirements upon a restore, there is no 'duplicate' storage requirements, other than the trivially small virtual log and data files (see illustration below). The benefit is magnified the more databases you mount to the same backup file. This technique could be used to provide a large development team a full development instance of a large production database. It is also incredibly easy to set up. Once SQL Virtual Restore is installed, you simply run a conventional RESTORE command to create the virtual database. This is what I have running as part of a nightly "release test" process triggered by my CI tool. RESTORE DATABASE WidgetProduction_virtual FROM DISK=N'C:\WidgetWF\ProdBackup\WidgetProduction.bak' WITH MOVE N'WidgetProduction' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_WidgetProduction_Virtual.vmdf', MOVE N'WidgetProduction_log' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_log_WidgetProduction_Virtual.vldf', NORECOVERY, STATS=1, REPLACE GO RESTORE DATABASE mydatabase WITH RECOVERY   Note the only change from what you would do normally is the naming of the .vmdf and .vldf files. SQL Virtual Restore intercepts this by monitoring the extension and applies its magic, ensuring the 'virtual' restore happens rather than the conventional storage-heavy restore. My automated release test then applies the upgrade scripts to the virtual production database and runs some validation tests, giving me confidence that were I to run this on production for real, all would go smoothly. For illustration, here is my 8Gb production database: And its corresponding backup file: Here are the .vldf and .vmdf files, which represent the only additional used storage for the new database following the virtual restore.   The beauty of this product is its simplicity. Once it is installed, the interaction with the backup and virtual database is exactly the same as before, as the clever stuff is being done at a lower level. SQL Virtual Restore can be downloaded as a fully functional 14-day trial. Technorati Tags: SQL Server

  Read the article

• Help Prevent Carpal Tunnel Problems with Workrave

  - by Matthew Guay

  Whether for work or leisure, many of us spend entirely too much time on the computer everyday.  This puts us at risk of having or aggravating Carpal Tunnel problems, but thanks to Workrave you can help to divert these problems. Workrave helps Carpal Tunnel problems by reminding you to get away from your computer periodically.  Breaking up your computer time with movement can help alleviate many computer and office related health problems.  Workrave helps by reminding you to take short pauses after several minutes of computer use, and longer breaks after continued use.  You can also use it to keep from using the computer for too much You time in a day.  Since you can change the settings to suit you, this can be a great way to make sure you’re getting the breaks you need. Install Workrave on Windows If you’re using Workrave on Windows, download (link below) and install it with the default settings. One installation setting you may wish to change is the startup.  By default Workrave will run automatically when you start your computer; if you don’t want this, you can simply uncheck the box and proceed with the installation. Once setup is finished, you can run Workrave directly from the installer. Or you can open it from your start menu by entering “workrave” in the search box. Install Workrave in Ubuntu If you wish to use it in Ubuntu, you can install it directly from the Ubuntu Software Center.  Click the Applications menu, and select Ubuntu Software Center. Enter “workrave” into the search box in the top right corner of the Software Center, and it will automatically find it.  Click the arrow to proceed to Workrave’s page. This will give you information about Workrave; simply click Install to install Workrave on your system. Enter your password when prompted. Workrave will automatically download and install.   When finished, you can find Workrave in your Applications menu under Universal Access. Using Workrave Workrave by default shows a small counter on your desktop, showing the length of time until your next Micro break (30 second break), Rest break (10 minute break), and max amount of computer usage for the day. When it’s time for a micro break, Workrave will popup a reminder on your desktop. If you continue working, it will disappear at the end of the timer.  If you stop, it will start a micro-break which will freeze most on-screen activities until the timer is over.  You can click Skip or Postpone if you do not want to take a break right then. After an hour of work, Workrave will give you a 10 minute rest break.  During this it will show you some exercises that can help eliminate eyestrain, muscle tension, and other problems from prolonged computer usage.  You can click through the exercises, or can skip or postpone the break if you wish.   Preferences You can change your Workrave preferences by right-clicking on its icon in your system tray and selecting Preferences. Here you can customize the time between your breaks, and the length of your breaks.  You can also change your daily computer usage limit, and can even turn off the postpone and skip buttons on notifications if you want to make sure you follow Workrave and take your rests! From the context menu, you can also choose Statistics.  This gives you an overview of how many breaks, prompts, and more were shown on a given day.  It also shows a total Overdue time, which is the total length of the breaks you skipped or postponed.  You can view your Workrave history as well by simply selecting a date on the calendar.   Additionally, the Activity tab in the Statics pane shows more info about your computer usage, including total mouse movement, mouse button clicks, and keystrokes. Conclusion Whether you’re suffering with Carpal Tunnel or trying to prevent it, Workrave is a great solution to help remind you to get away from your computer periodically and rest.  Of course, since you can simply postpone or skip the prompts, you’ve still got to make an effort to help your own health.  But it does give you a great way to remind yourself to get away from the computer, and especially for geeks, this may be something that we really need! Download Workrave Similar Articles Productive Geek Tips Switch to the Dvorak Keyboard Layout in XPAccess Your MySQL Server Remotely Over SSHHow to Secure Gaim Instant Messenger traffic at Work with SecureCRT and SSHConnect to VMware Server Console Over SSHDisclaimers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader

  Read the article

• Happy 3rd Birthday SilverlightCream!

  - by Dave Campbell

  Happy 3rd Birthday!     Yesterday (May 16) was the 'Birthday' of SilverlightCream, which started just after MIX in 2007 with a post "Interesting Silverlight posts today: Silverlight Control & Silverlight Pad". Too many good posts flying around led me to want to archive them, particularly since I was being aggregated at a new site Silverlight.net, and I could give some of that 'reach' to the community. Saturday's post was number 862, and as of that post, there were 5697 blog posts archived in the database all tagged up and searchable at SilverlightCream.com using the search page. The search needs to be better, and that's another discussion, but it does work. The blog didn't begin life as the SilverlightCream blog, as is obvious from the name, but once I realized people were following it closely, I've tried to keep the signal-to-noise ratio very high. I even secured another blog for when I just want to rant about something to keep that stuff out of this one :) If you've been around since MIX07 days you've heard all this, but after talking to some people at MIX10 I realized not everyone knows all the ways the information is presented, so I figured doing a post like this once a year probably isn't a bad idea :) I scrounge through an ever-growing list of blogs (right now sitting at 505) looking for good stuff. I try to spin through the list every day, but with the list growing that large, it's getting tough. I usually use it as a background task while working or watching TV. If I just sit and go through the blogs it takes about an hour. The list is long enough now that from time to time, I'll only get partway through it and have 10 to 13 entries, so I'll just stop there and go on the next day... I don't like to have more than 15 in any single post. It's all pattern recognition as in "seen that", "seen that", "that's new", etc... so if you're a blogger, look at a heading below for some comments about blogging from my perspective. When I see something new, I make sure you're not pulling a 'Mike Taulty' on me and dumping 6 or 8 new posts in one day :), and I tag the ones I want to review. If there's not a lot going on, I may just push the posts as I come across them. Some days there may be 60 posts in that 'to review' list! Some are non-Silverlight, some are essentially duplicates of others, some are demos, ads, new releases of something, session materials, etc. I push lots of material into a database at WynApse.com, and the "Tagged Posts" menu on the left sidebar there takes you to a tag cloud of (at this very moment) "9224 articles tagged 13915 different ways using 459 unique tags". There are links in there on Gibson guitars, Jazz Guitar instructional stuff, Ford F-250 links, and tons of technical and non-technical stuff I've been aggregating for about 5 years now. So when I decide to blog (or shoutout) something, I first push it into the database at WynApse.com. Then I tag it all up and push it into the database at SilverlightCream.com. Then it gets pushed to @SilverlightNews. For a little over a year now, we're tracking unique IP hits on posts launched from either the blog post or from one of the SilverlightCream.com pages, and the posts with top hits from unique IP addresses in the last 7 days are displayed in a 'Skim' page at SilverlightCream... and that page needs work as well. The Skim page and tracking was the brainchild of my buddy Michael Washington. What I blog/shoutout After some time doing posts, I decided there were things that probably have no need to be searchable, but are good information, so I post those as 'Shoutouts'. Eventually I also decided the Shoutouts should get posted to @SilverlightNews, and that's now taking place. Notes to bloggers Remember I said spinning throught the Big List-o-BlogsTM is pattern recognition... that means I don't spend a lot of time on any individual blog deciding if it has new content. If you're familiar with the term 'Above the Fold', then you're probably ok. If I have to scroll the page to see if there's something new, or wade through some maze of menus, I'm probably going to miss new stuff. Likewise if you only show the latest on the front page and make it a puzzle to find the rest of them, or if you make the titles and initial graphics almost identical to the previous article, I'll miss it. Another thing is name/brand-recognition. Far be it for me (WynApse) to comment on someone blogging with a pseudonym, but if you want to get get some recognition, you are going to want your name to be available somewhere. I can think right off the top of my head of a couple good blogs that I have no idea of the individuals' real names. I can pull that off a bit because I've been around so long almost everyone knows who I am, but if you're new to the blog-o-sphere, being able to be name-recognized is as important as getting your brand out there. Kick my tires Finally, stuff happens... I may hit the wrong key and delete your blog, or a post might slip past me and I not realize it's new because of the naming, and never blog it. If you think I missed something, send me an email or use the submit page at SilverlightCream.com. Some bloggers have figured out that if they submit (one way or another) to me, their posts will go out next. I try to honor anyone that takes the time to submit with a quicker 'Cream posting. Thanks! Finally, thanks to everyone that contributes to the community as a whole... the blogs, the videos, and the presentations. A special thanks to everyone that reads SilverlightCream, or follows @WynApse or @SilverlightNews. Keep it all coming, and... Stay in the 'Light

  Read the article

• SQL Saturday 43 in Redmond

  - by AjarnMark

  I attended my first SQLSaturday a couple of days ago, SQLSaturday #43 in Redmond (at Microsoft).  I got there really early, primarily because I forgot how fast I can get there from my home when nobody else is on the road.  On a weekday in rush hour traffic, that would have taken two hours to get there.  I gave myself 90 minutes, and actually got there in about 45.  Crazy! I made the mistake of going to the main Microsoft campus, but that’s not where the event was being held.  Instead it was in a big Microsoft conference center on the other side of the highway.  Fortunately, I had the address with me and quickly realized my mistake.  When I got back on track, I noticed that there were bright yellow signs out on the street corner that looked like they said they were for SOL Saturday, which actually was appropriate since it was the sunniest day around here in a long time. Since I was there so early, the registration was just getting setup, so I found Greg Larsen who was coordinating things and offered to help.  He put me to work with a group of people organizing the pre-printed raffle tickets and stuffing swag bags. I had never been to a SQLSaturday before this one, so I wasn’t exactly sure what to expect even though I have read about a few on some blogs.  It makes sense that each one will be a little bit different since they are almost completely volunteer driven, and the whole concept is still in its early stages.  I have been to the PASS Summit for the last several years, and was hoping for a smaller version of that.  Now, it’s not really fair to compare one free day of training run entirely by volunteers with a multi-day, $1,000+ event put on under the direction of a professional event management company.  But there are some parallels. At this SQLSaturday, there was no opening general session, just coffee and pastries in the common area / expo hallway and straight into the first group of sessions.  I don’t know if that was because there was no single room large enough to hold everyone, or for other reasons.  This worked out okay, but the organization guy in me would have preferred to have even a 15 minute welcome message from the organizers with a little overview of the day.  Even something as simple as, “Thanks to persons X, Y, and Z for helping put this together…Sessions will start in 20 minutes and are all in rooms down this hallway…the bathrooms are on the other side of the conference center…lunch today is pizza and we would like to thank sponsor Q for providing it.”  It doesn’t need to be much, certainly not a full-blown Keynote like at the PASS Summit, but something to use as a rallying point to pull everyone together and get the day off to an official start would be nice.  Again, there may have been logistical reasons why that was not feasible here.  I’m just putting out my thoughts for other SQLSaturday coordinators to consider. The event overall was great.  I believe that there were over 300 in attendance, and everything seemed to run smoothly.  At least from an attendee’s point of view where there was plenty of muffins in the morning and pizza in the afternoon, with plenty of pop to drink.  And hey, if you’ve got the food and drink covered, a lot of other stuff could go wrong and people will be very forgiving.  But as I said, everything appeared to run pretty smoothly, at least until Buck Woody showed up in his Oracle shirt.  Other than that, the volunteers did a great job! I was a little surprised by how few people in my own backyard that I know.  It makes sense if you really think about it, given how many companies must be using SQL Server around here.  I guess I just got spoiled coming into the PASS Summit with a few contacts that I already knew would be there.  Perhaps I have been spending too much time with too few people at the Summits and I need to step out and meet more folks.  Of course, it also is different since the Summit is the big national event and a number of the folks I know are spread out across the country, so the Summit is the only time we’re all in the same place at the same time.  I did make a few new contacts at SQLSaturday, and bumped into a couple of people that I knew (and a couple others that I only knew from Twitter, and didn’t even realize that they were here in the area). Other than the sheer entertainment value of Buck Woody’s session, the one that was probably the greatest value for me was a quick introduction to PowerShell.  I have not done anything with it yet, but I think it will be a good tool to use to implement my plans for automated database recovery testing.  I saw just enough at the session to take away some of the intimidation factor, and I am getting ready to jump in and see what I can put together in the next few weeks.  And that right there made the investment worthwhile.  So I encourage you, if you have the opportunity to go to a SQLSaturday event near you, go for it!

  Read the article

• Why is my external USB hard drive sometimes completely inaccessible?

  - by Eliah Kagan

  I have an external USB hard drive, consisting of an 1 TB SATA drive in a Rosewill RX35-AT-SU SLV Aluminum 3.5" Silver USB 2.0 External Enclosure, plugged into my SONY VAIO VGN-NS310F laptop. It is plugged directly into the computer (not through a hub). The drive inside the enclosure is a 7200 rpm Western Digital, but I don't remember the exact model. I can remove the drive from the enclosure (again), if people think it's necessary to know that detail. The drive is formatted ext4. I mount it dynamically with udisks on my Lubuntu 11.10 system, usually automatically via PCManFM. (I have had Lubuntu 12.04 on this machine, and experienced all this same behavior with that too.) Every once in a while--once or twice a day--it becomes inaccessible, and difficult to unmount. Attempting to unmount it with sudo umount ... gives an error message saying the drive is in use and suggesting fuser and lsof to find out what is using it. Killing processes found to be using the drive with fuser and lsof is sometimes sufficient to let me unmount it, but usually isn't. Once the drive is unmounted or the machine is rebooted, the drive will not mount. Plugging in the drive and turning it on registers nothing on the computer. dmesg is unchanged. The drive's access light usually blinks vigorously, as though the drive is being accessed constantly. Then eventually, after I keep the drive off for a while (half an hour), I am able to mount it again. While the drive doesn't work on this machine for a while, it will work immediately on another machine running the same version of Ubuntu. Sometimes bringing it back over from the other machine seems to "fix" it. Sometimes it doesn't. The drive doesn't always stop being accessible while mounted, before becoming unmountable. Sometimes it works fine, I turn off the computer, I turn the computer back on, and I cannot mount the drive. Currently this is the only drive with which I have this problem, but I've had problems that I think are the same as this, with different drives, on different Ubuntu machines. This laptop has another external USB drive plugged into it regularly, which doesn't have this problem. Unplugging that drive before plugging in the "problem" drive doesn't fix the problem. I've opened the drive up and made sure the connections were tight in the past, and that didn't seem to help (any more than waiting the same amount of time that it took to open and close the drive, before attempting to remount it). Does anyone have any ideas about what could be causing this, what troubleshooting steps I should perform, and/or how I could fix this problem altogether? Update: I tried replacing the USB data cable (from the enclosure to the laptop), as Merlin suggested. I should've tried that long ago, since it fits the symptoms perfectly (the drive works on another machine, which would make sense because the cable would be bent at a different angle, possibly completing a circuit of frayed wires). Unfortunately, though, this did not help--I have the same problem with the new cable. I'll try to provide additional detailed information about the drive inside the enclosure, next time I'm able to get the drive working. (At the moment I don't have another machine available to attach it.) Major Update (28 June 2012) The drive seems to have deteriorated considerably. I think this is so, because I've attached it to another machine and gotten lots of errors about invalid characters, when copying files from it. I am less interested in recovering data from the drive than I am in figuring out what is wrong with it. I specifically want to figure out if the problem is the drive or the enclosure. Now, when I plug the drive into the original machine where I was having the problems, it still doesn't appear (including with sudo fdisk -l), but it is recognized by the kernel and messages are added to dmesg. Most of the message consist of errors like this, repeated many times: [ 7.707593] sd 5:0:0:0: [sdc] Unhandled sense code [ 7.707599] sd 5:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 7.707606] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 7.707614] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 7.707621] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 7.707636] end_request: critical target error, dev sdc, sector 0 [ 7.707641] Buffer I/O error on device sdc, logical block 0 Here are all the lines from dmesg starting with when the drive is recognized. Please note that: I'm back to running Lubuntu 12.04 on this machine (and perhaps that's a factor in better error messages). Now that the drive has been plugged into another machine and back into this one, and also now that this machine is back to running 12.04, the drive's access light doesn't blink as I had described. Looking at the drive, it would appear as though it is working normally, with low or no access. This behavior (the errors) occurs when rebooting the machine with the drive plugged in, and also when manually plugging in the drive. A few of the messages are about /dev/sdb. That drive is working fine. The bad drive is /dev/sdc. I just didn't want to edit anything out from the middle.

  Read the article

• OS Analytics with Oracle Enterprise Manager (by Eran Steiner)

  - by Zeynep Koch

  Oracle Enterprise Manager Ops Center provides a feature called "OS Analytics". This feature allows you to get a better understanding of how the Operating System is being utilized. You can research the historical usage as well as real time data. This post will show how you can benefit from OS Analytics and how it works behind the scenes. The recording of our call to discuss this blog is available here: https://oracleconferencing.webex.com/oracleconferencing/ldr.php?AT=pb&SP=MC&rID=71517797&rKey=4ec9d4a3508564b3Download the presentation here See also: Blog about Alert Monitoring and Problem Notification Blog about Using Operational Profiles to Install Packages and other content Here is quick summary of what you can do with OS Analytics in Ops Center: View historical charts and real time value of CPU, memory, network and disk utilization Find the top CPU and Memory processes in real time or at a certain historical day Determine proper monitoring thresholds based on historical data Drill down into a process details Where to start To start with OS Analytics, choose the OS asset in the tree and click the Analytics tab. You can see the CPU utilization, Memory utilization and Network utilization, along with the current real time top 5 processes in each category (click the image to see a larger version):  In the above screen, you can click each of the top 5 processes to see a more detailed view of that process. Here is an example of one of the processes: One of the cool things is that you can see the process tree for this process along with some port binding and open file descriptors. Next, click the "Processes" tab to see real time information of all the processes on the machine: An interesting column is the "Target" column. If you configured Ops Center to work with Enterprise Manager Cloud Control, then the two products will talk to each other and Ops Center will display the correlated target from Cloud Control in this table. If you are only using Ops Center - this column will remain empty. The "Threshold" tab is particularly helpful - you can view historical trends of different monitored values and based on the graph - determine what the monitoring values should be: You can ask Ops Center to suggest monitoring levels based on the historical values or you can set your own. The different colors in the graph represent the current set levels: Red for critical, Yellow for warning and Blue for Information, allowing you to quickly see how they're positioned against real data. It's important to note that when looking at longer periods, Ops Center smooths out the data and uses averages. So when looking at values such as CPU Usage, try shorter time frames which are more detailed, such as one hour or one day. Applying new monitoring values When first applying new values to monitored attributes - a popup will come up asking if it's OK to get you out of the current Monitoring Policy. This is OK if you want to either have custom monitoring for a specific machine, or if you want to use this current machine as a "Gold image" and extract a Monitoring Policy from it. You can later apply the new Monitoring Policy to other machines and also set it as a default Monitoring Profile. Once you're done with applying the different monitoring values, you can review and change them in the "Monitoring" tab. You can also click the "Extract a Monitoring Policy" in the actions pane on the right to save all the new values to a new Monitoring Policy, which can then be found under "Plan Management" -> "Monitoring Policies". Visiting the past Under the "History" tab you can "go back in time". This is very helpful when you know that a machine was busy a few hours ago (perhaps in the middle of the night?), but you were not around to take a look at it in real time. Here's a view into yesterday's data on one of the machines: You can see an interesting CPU spike happening at around 3:30 am along with some memory use. In the bottom table you can see the top 5 CPU and Memory consumers at the requested time. Very quickly you can see that this spike is related to the Solaris 11 IPS repository synchronization process using the "pkgrecv" command. The "time machine" doesn't stop here - you can also view historical data to determine which of the zones was the busiest at a given time: Under the hood The data collected is stored on each of the agents under /var/opt/sun/xvm/analytics/historical/ An "os.zip" file exists for the main OS. Inside you will find many small text files, named after the Epoch time stamp in which they were taken If you have any zones, there will be a file called "guests.zip" containing the same small files for all the zones, as well as a folder with the name of the zone along with "os.zip" in it If this is the Enterprise Controller or the Proxy Controller, you will have folders called "proxy" and "sat" in which you will find the "os.zip" for that controller The actual script collecting the data can be viewed for debugging purposes as well: On Linux, the location is: /opt/sun/xvmoc/private/os_analytics/collect If you would like to redirect all the standard error into a file for debugging, touch the following file and the output will go into it: # touch /tmp/.collect.stderr   The temporary data is collected under /var/opt/sun/xvm/analytics/.collectdb until it is zipped. If you would like to review the properties for the Analytics, you can view those per each agent in /opt/sun/n1gc/lib/XVM.properties. Find the section "Analytics configurable properties for OS and VSC" to view the Analytics specific values. I hope you find this helpful! Please post questions in the comments below. Eran Steiner

  Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >