Search Results

Search found 4489 results on 180 pages for 'black cobra'.

Page 101/180 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

  • iSCSI drives suddenly inaccessible or corrupted

    - by Hammer1
    I have two NAS (Seagate Black Armors) connected to our network through iSCSI to a Dell Optiplex 760 running 32-bit Windows 7 and Windows iSCSI Initiator. For some unknown reason within the last week both are reportedly inaccessible and/or corrupt (that is the error message generated when I attempt to open the on the iSCSI computer). However, connecting to either of them via direct IP goes off without a hitch. I've tried Error checking but received "The disk check could not be performed because Windows could not access the disk." I've tried System Recover to a date almost two weeks back thinking Windows update may have caused the issue but there is no change. Anyone have an explanation and/or a solution to get them reconnected? Thanks.

    Read the article

  • Updating GeForce 9200 driver on Vista (64-bit) yields installer failed

    - by weka
    OK, so I have a Windows Vista... more specifically this: http://www.newegg.com/Product/Product.aspx?Item=N82E16883103182 a Acer Aspire AX3200-U3600A Desktop. I have DirectX 11 and I am trying to update my drivers... During the update of the latest one: GeForce 306.23 Driver my screen flashes a bit and goes black. This is standard when updating GRAPHIC DRIVERS. Then... my screen shifts 50 pixels or so to the left... OFFSCREEN. Not even Auto Image Adjust will fix the screen back... Then after that happens, I get this: Help, please? I just want to update my graphic drivers....

    Read the article

  • Removing BIOS Post Messages

    - by Steve
    I am working on a project where a standard x86 desktop system will boot and run a single program until it is shut down. I would like to remove all the bios post messages so that it looks a little more "finished" and cleaner when it starts up. I was hoping that there might by a standard implementation/terms to know about so I can avoid having to dig through every manual to see if there are options, or get some advice on a standard set of tools I should be using. I was thinking about getting a board that has an image that covers up the post messages until you press a key and trying to customize it to all black, but it's not clear if this is a good direction. I started looking for OEM motherboards but my searches were filled with standard commercial stuff, or seemed to be way to big for my toy project. What is the best way to go about removing all the bios post messages and just having a blank screen or "loading" message until OS loads?

    Read the article

  • My laptop keeps hard resetting

    - by cgoddard
    I have had this laptop for a long time (five years at least) and it hasn't had the best treatment over the years. But over the last few months, it has been randomly completely shutting down, no blue screening, no steady shutdown, just black screen, then BIOS. I think it might be happening as I do a save, but cant be sure, but recently it has been getting very annoying. I did initially think it was an overheating issue, but the speed that it comes back online is staggeringly fast for it to have cooled down sufficiently. plus it has got incredibly hot before with no issue (since its been doing this). Does anyone know what might be going on? Dell Inspiron 640m, running Windows 7.

    Read the article

  • Fresh Vista install and the strange appearance of boxes/rectangles

    - by Nick
    I purchased a new hard-drive, and after doing a fresh install of Vista and installing all updates/latest drivers, I'm noticing that all of a sudden and shortly after being powered on, I get black boxes/rectangles all over my screen (below). Any ideas as to what could be causing this? On a (maybe) related note, my brand new hard-drive is squeaking. Not often, but it is there. Debating on whether or not it is worth the hassle of sending it back, or if this is related to the mysterious rectangles.

    Read the article

  • Can Apache be configured to specify more than one docroot per virtualhost?

    - by syn4k
    I have a vhost which specifies <VirtualHost *:80> DocumentRoot "/private/var/www/html/cms/sites/" ServerName localhost.com </VirtualHost> I would like to know if localhost.com can also point to /private/var/www/html/wordpress/. This seems like a no brainer but Apache is like black magic; these things are always possible. Anyway, I already know that I could specify a new ServerName entry and set a new docroot. The problem is, both directories need to be available as roots. If I need to provide more info, I will gladly do so.

    Read the article

  • Replacing GRUB2 with Windows boot loader

    - by KovBal
    I'm trying to replace GRUB2 with Windows' standard boot loader (bootmgr?), but I can't get it to work. My Windows 7 install is in a single NTFS partition, which is marked as active (boot flag is set). First, I tried the automatic repair with the install disk, but it didn't detect any problems. Then I ran bootrec /fixmbr and bootrec /fixboot, but all I got was a black screen at boot with a blinking cursor. After that I created a boot partition for GRUB2, I figured, at least I can use it to chainload, but it give me a "disk reading error". If I used GRUB's ntldr loader, than I got error 0xc0000225 (some sort of BCD error). I tried to rebuild the BCD from the rescue environment, and it was successful, but the error didn't go away. Update: I've tried to rebuild the BCD, but nothing changed...

    Read the article

  • How to change the overlapping order of TabItems in WPF TabControl

    - by sannoble
    I have created vertical TabItems with a Path object. The selected TabItem overlaps the unselected TabItems, this works fine. The overlapping is done by setting a negative margin in the TabItem Template. For the unselected TabItems right now a TabItem is overlapped by the TabItem below. For example in the picture Tab 4 overlaps Tab 3 and Tab 3 overlaps Tab 2. I would like to change the overlapping order for the unselected Tab Items, so that an unselected TabItem overlaps the TabItem below and is overlapped by the TabItem above, e.g. Tab 2 overlaps Tab 3 and Tab 3 overlaps Tab 4. I have tried to set the FlowDirection property of TabPanel, but this doesn't work. How can I achieve this? Any help is appreciated. Thanks in advance! Wrong overlapping of unselected TabItems: XAML-Code: <Style x:Key="styleMainNavTabControl" TargetType="{x:Type TabControl}"> <Setter Property="TabStripPlacement" Value="Left" /> <Setter Property="SnapsToDevicePixels" Value="true"/> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type TabControl}"> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="*" /> <ColumnDefinition Width="200"/> </Grid.ColumnDefinitions> <Border Grid.Column="0" Background="White" BorderBrush="Black" BorderThickness="0,0,1,0" Padding="20"> <ContentPresenter ContentSource="SelectedContent" /> </Border> <Border Grid.Column="1" Padding="0,30,10,0" Background="#F7F3F7"> <TabPanel Panel.ZIndex="1" Margin="-1,0,0,0" FlowDirection="RightToLeft" IsItemsHost="True" Background="Transparent"/> </Border> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style> <Style x:Key="styleMainNavTabItem" TargetType="{x:Type TabItem}"> <Setter Property="MinHeight" Value="90" /> <Setter Property="FontSize" Value="14" /> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type TabItem}"> <Grid Margin="0,0,0,-35"> <Path Name="TabPath" Stroke="Black" StrokeThickness="1" Fill="LightGray" Data="M 0,0 a 10,10 0 0 0 10,10 h 150 a 20,20 0 0 1 20,20 v 60 a 20,20 0 0 1 -20,20 h -150 a 10,10 0 0 0 -10,10 z" /> <ContentPresenter ContentSource="Header" Margin="10,2,10,2" VerticalAlignment="Center" TextElement.Foreground="#FF000000"/> </Grid> <ControlTemplate.Triggers> <Trigger Property="IsSelected" Value="True"> <Setter Property="Panel.ZIndex" Value="100" /> <Setter TargetName="TabPath" Property="Fill" Value="White" /> <Setter TargetName="TabPath" Property="Data" Value="M 0,0 a 10,10 0 0 0 10,10 h 150 a 20,20 0 0 1 20,20 v 60 a 20,20 0 0 1 -20,20 h -150 a 10,10 0 0 0 -10,10" /> </Trigger> <Trigger Property="IsSelected" Value="False"> <Setter Property="Panel.ZIndex" Value="90" /> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> </Setter.Value> </Setter>

    Read the article

  • how to trace an outlook mail not arriving to its destination when is sent to another domain?

    - by Alex. S.
    Hi, I have an domain account configured with Ipower.com. If I use an email client such as Evolution, the mails arrive as expected. However if I use Outlook 2007 (as everybody in this company) the mails only arrive if the destination belongs to the same domain. That means when the destination is a gmail address, for example, the test email falls into a sort of black hole... This is just a simple ipower setup, nothing of Exchange or something like that. What else can I do to isolate and fix this issue? This is driving me nuts because in other email client with the same exact configuration in the same machine, everything works well and I need to fix the thing in Outlook.

    Read the article

  • Issues with new graphics card and drivers

    - by Ortund
    With my onboard graphics card (Intel HD 4000) I was able to use 1680x1050 screen resolution. Using the same screen and an Asus ENGTS250 graphics card with 296.10 drivers installed, I'm not able to use that resolution anymore. Also, I've been having other trouble with driver installations. Using 340.52 or 337.88, I can't boot into Windows 7. I see the Windows Welcome screen and then the screen goes black, loses signal and the computer locks up. I think the drivers issues and the resolution problems go hand-in-hand. I have a feeling I could use a newer driver than 296.10 which would give me access to use the 1680x1050 resolution I want to use, but I'm terrified that if I update or install another driver, that the computer will lock up again. Can anyone recommend a [better] driver for me to use?

    Read the article

  • Windows 7 Hibernate Problem

    - by goygoycu
    I cannot hibernate windows. When I click "hibernate", my laptop(windows) just locks and the screen goes black. I can unlock without any problem. I do not have any problem with other options such as "sleep" or "shut down". I updated the chipset drivers but it did not help. There is not any option in BIOS about the sleep modes. "Hibernate" is "on" on Windows. Any advice? My Laptop specifications: MSI A5000 3gb system memory, Windows 7 Home Premium 32bit installed, Gentoo linux installed, Grub bootloader(MBR). Hard drive: Around 4gb of free space in windows partition.

    Read the article

  • External hard disk not showing up as removable media

    - by mark
    Windows 7 Pro x64, my external hard drive is a Western Digital Carviar Black. The hard drive is connected via USB (tried all my 2.0 and 3.0 ob my Gigabyte GA-X58A-UD7) but once I initialized it in the "disk management" (or whatever the proper term is; I'm using a German edition of Windows) I have to assign it a manual drive letter. Otherwise it doesn't show up. I'm confused because usually externally connected drives (be it USB sticks or real hard disks) just show up as "Removable media", but this one doesn't. Is this OK/expected? Will there be troubles when I go to another Windows computer? I formatted the drive with quick format and NTFS. I changed the permissions to have read/write for "Everyone" on that drive. thanks

    Read the article

  • vmware takes too much time to shut down

    - by user33754
    Each time I shuting down my virtual machine - it takes like 30 minutes for VM Ware to complete the process. The shut down is done, but it shows a black screen and doesn't respond to any command. I can't do a Power Power OFF or Power Suspend. When I click it - nothing changes. When trying to close - it says "still busy". This happens only when using a Virtual Machine stored on an external hard drive. When Virtual Machine files are stored on a local drive - everything is OK. Hard drive is working good. Any suggestions how can I investigate the issue?

    Read the article

  • Image annotation with Inkscape, Pointer and explanation for objects in picture

    - by None
    I need straight paths with end markers for associating text to parts of the image. For better readability, it needs to be high-contrast, i.e. a white line with black outline. Stroke to path will create a group of a box and a circle from the line with end marker. This makes placement of the markers more difficult, as with the node tool it is just a matter of dragging the end nodes of a line segment. I will try to place the markers as line for now and only finally converting them to an outline.

    Read the article

  • How can one make the title bar text have better contrast on dark colors in Windows 8?

    - by zeel
    When Windows 8 color setting are set to a very dark color, such as black or navy blue, the title bar text and the minimize/maximize buttons are nearly invisible. This makes dark colors difficult to work with. In Windows 7 there was an advanced color options, this is gone in 8. The registry keys associated with this seem to still be present, but they have no effect. Is there a way to change this? Or a third party application that can do it? I don't want to use the ugly high contrast theme, I want to use the nice Win 8 theme with a dark color.

    Read the article

  • Pressing zero key brings up lock/switch user screen in W7

    - by qinghua
    This issue started after my cat walked all over the keyboard... Whenever I press the "zero" key, the screen goes black and I'm taken to the lock/switch user screen. The other functions of the key work fine - it can produce ) and / like usual. Numlock is off, and as far as I know, my computer doesn't have Function Lock. If I log out of my user account and sign in as a guest, the "zero" works again, but if I create a new user profile, it doesn't work. I get the same issue when I hit "zero" using the on-screen keyboard. My keyboard layout is set to US English. I've uninstalled and reinstalled the ATK package, and updated my keyboard drivers. I have an ASUS U43JC-X1 laptop running Windows 7, and I haven't installed any new programs lately.

    Read the article

  • File must be saved as a copy with this selection?

    - by Mick
    I have created an image in photoshop 7 and am now attempting to save it as a png. I click "Save As" and am presented with a save file dialog with *.PSD selected by default. If I then select *.PNG a yellow triangle with a black exclamation mark appears next to a greyed out box called "Layers" and the message "file must be saved as a copy with this selection" appears. This is confusing me because the image is comprised of only a single layer. How do I resolve this?

    Read the article

  • Sony VAIO Broken Computer Screen automatically connect to external

    - by iberos
    I have a SONY Vaio with a screen that's broken as in I only see white or black dots on the display. I would like to have it start automatically to the external, but my previous computer settings for an external display has it set on "extend" rather than "duplicate". Therefore, whenever I boot up, I have the extended screen on the external, which does me no good since I can't really do anything with my start bar still located on the broken screen. I hope that makes sense. Has anyone else run into this problem? I've seen some things about starting in BIOS. Will my broken computer screen still be able to display the contents when I'm in BIOS? How do I get there? or are there keystrokes for a Sony Vaio that will automatically let me duplicate screens or direct everything to the external? Thanks!

    Read the article

  • What components should I upgrade to squeeze more life of my pc? [on hold]

    - by Jared
    Hi my current specs are CPU: Intel Core i5 750 2.66 GHz, Socket 1156 Motherboard: Asus P7P55 LX Motherboard, Socket 1156, 4xDIMM DDR3, 2xPCIe-16, 3xPCI, 2xPCIe-1, 14xUSB2, Audio, 1xATA, 6xSATA, RAID, ATX HDD: Seagate Barracuda 7200.11 ST31500341AS Hard Disk Drive, 1500GB, 7200rpm, 32MB Cache, SATA-2 RAM: G.Skill Ripjaw F3-12800CL8D-4GBRM, 2x2GB, DDR3-1600, PC3-12800, CL8, DIMM Video: MSI Radeon 5850 R5850-PM2D1G Video Card, 1024MB, DDR5, PCIe-16, DVI, CrossFire, HDMI PSU: Vantec ION2, 620W ATX PSU, SLI Ready, Black Firstly I know it badly needs an SSD, for which I'm thinking of the Samsung 250gb 840 EVO series. The ram could do with another 4GB, for which I am thinking of replacing the 2x2GB for 2x4GB of the same type. My video card is struggling with the latest releases, so vitally should I ditch the video card and go for something newer (ATI 7850, GTX 660?) or try and get another 5850 for crossfire support? Bearing in mind 5850's are sort of hard to come buy now as they are not stocked in shops usually, which means they have to be bought second hand.

    Read the article

  • Dark Windows Themes

    - by CaffGeek
    I spend all day staring at computer screens. I have changed my Visual Studio theme to a dark theme, and find it much easier on the eyes. I'd like to change the rest of windows. Unfortunately, the only themes installed by default that are dark, are high contrast. Which is NOT what I am going for here. I can't seem to find an official dark theme, that isn't high contrast. I've found dynamic black, which is a good example of what I'm looking for, but it's not an official theme. Is there anything out there?

    Read the article

  • messed System Files on Mac PPC

    - by glider
    My buddy deleted her System folder from her PPC Mac wanting to get that space for something else. She copied it first in another drive (she had partitioned disk).She haven't emptied the Trash Bin yet. The screen just froze right after she moved the folder to Trash. We tried to use the install disk but even if we try Power-C on booting,it would try to continue,display the apple logo page then quickly follow it with black screen filled with dumps of hex codes and "We are hanging here..." We have a Windows-based PC that we tried to connect using ethernet cable but we can't find her computer from there. What should we do now???

    Read the article

  • Asus V1S, no video signals but boots ok

    - by user52441
    Hey folks! I got a mayor problem with my 3 year old my Asus V1S notebook. After installing VMWare Player an rebooting the screen remained black and there was no POST screen. Also the other video outputs - VGA and HDMI - send no signals. However the maschine boots into Windows 7 properly (sounds waren played) and I can log in by blindly typing my pw. Testend WIN-P and functiom keys but no luck with that. Google is no help here, thats why I basketball you superusers! Please give me hints if you have any idea or if you experienced a similar problem. Thank you so much!

    Read the article

  • Xubuntu Terminal overrides shell- and vi color schemes, how to deactivate?

    - by erikb85
    I'm running an up-to-tade Xubuntu and have a real problem with these Terminals. I don't want them to be all that design-ish. Just the plain old Terminal with a black background and green text. And in VIM I want to use my own color scheme. But the xfce-4-terminal doesn't seem to let me do that. It always uses it's own color schemes and they just don't work for all cases (you have like 6 different types of text elements to color, for coding you need more). How can I disable the coloring in the terminal or just load a simple one without all these features?

    Read the article

  • New Kingson SSD drive fails after 1 week

    - by user35356
    I upgraded the hard disk in my notebook to a 128GB Kingston SSD V100. Everything worked fine for about a week then out of the blue the notebook would not boot up any more. A black dos-like screen was shown with the options to try and boot normally or attempt to repair windows. Neither option would do anything. When I removed the drive and tested it in an external usb case no other computers are able to access the drive either. Is there anything I can try to fix it myself? The drive is partitioned into three drives and when it's connected through an external usb case to another computer I can see the partitions, just can't access anything on them. Does this mean the drive might be recoverable?

    Read the article

  • pygame double buffering

    - by BaldDude
    I am trying to use double buffering in pygame. What I'm trying to do is display a red then green screen, and switch from one to the other. Unfortunately, all I have is a black screen. I looked through many sites, but have been unable to find a solution. Any help would be appreciated. import pygame, sys from pygame.locals import * RED = (255, 0, 0) GREEN = ( 0, 255, 0) bob = 1 pygame.init() #DISPLAYSURF = pygame.display.set_mode((500, 400), 0, 32) DISPLAYSURF = pygame.display.set_mode((1920, 1080), pygame.OPENGL | pygame.DOUBLEBUF | pygame.HWSURFACE | pygame.FULLSCREEN) glClear(GL_COLOR_BUFFER_BIT) glMatrixMode(GL_MODELVIEW) glLoadIdentity() running = True while running: if bob==1: #pygame.draw.rect(DISPLAYSURF, RED, (0, 0, 1920, 1080)) #pygame.display.flip() glBegin(GL_QUADS) glColor3f(1.0, 0.0, 0.0) glVertex2f(-1.0, 1.0) glVertex2f(-1.0, -1.0) glVertex2f(1.0, -1.0) glVertex2f(1.0, 1.0) glEnd() pygame.dis bob = 0 else: #pygame.draw.rect(DISPLAYSURF, GREEN, (0, 0, 1920, 1080)) #pygame.display.flip() glBegin(GL_QUADS) glColor3f(0.0, 1.0, 0.0) glVertex2f(-1.0, 1.0) glVertex2f(-1.0, -1.0) glVertex2f(1.0, -1.0) glVertex2f(1.0, 1.0) glEnd() pygame.dis bob = 1 for event in pygame.event.get(): if event.type == pygame.QUIT: running = False elif event.type == KEYDOWN: if event.key == K_ESCAPE: running = False pygame.quit() sys.exit() I'm using Python 2.7 and my code need to be os independent. Thanks for your help.

    Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >