Search Results

Search found 9667 results on 387 pages for 'hardware monitoring'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 103/387 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

  • Can software operation damage an SD card?

    - by Borek
    My SD card has a broken boot sector and the tools I've tried say that it's not repairable (I've tried TestDisk, DriveRestore Pro and Easeus Partition Recovery). The card was in my Android phone and at one point, it simply shut down and I had to reboot it. After I rebooted it, the SD card was not recognized and since then I've tried to recover it (I don't want to format the card as it contains some data I'd like not to lose although it's nothing critical). My question is, can some software error in Android, or a sudden crash of a system, damage the SD card? Or was it the other way around, the card first died and it brought the system down?

    Read the article

  • HDD dead forever???

    - by Roberto
    Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken, it couldn't be recognized by the BIOS. I have another of the same hd, so I exchanged the boards. I found out that there is a problem on its board since my good hd didn't work. But the broken hd doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hd is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hd but with the wrong size (2TB). I try to make it read the hd but it get an I/O error reading sector. It tries to read, the hd spins... So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do recover the files from it?

    Read the article

  • Should I bother upgrading my Opteron 270 Server?

    - by MousePad
    I have an Opteron Server machine (in a large workstation class case) running on the Tyan 2895 motherboard. It's a dual CPU socket board, but I only have one 270 in there. I have 4GB of RAM, but less than 3GB is addressable, even in 64bit mode, due to the way the board is designed. Is it worth spending a few hundred on an additional CPU and maybe some more RAM? The other problem is that one of the two SATA ports on the board had its wire socket break off. So only one drive can be run as of now. I could have it repaired, but at what cost? Add in the fact that the power supply is gunked up with dust and it's a bit of a nightmare. I actually work about it getting too hot. Seems that for the money I could buy a new server rack from Dell, but it also seems a shame to waste an otherwise working, and for my needs still very fast machine.

    Read the article

  • What is the best way to shutdown hard disk?

    - by Sunil
    Right Now I'm using hdparm command in unix to shut down the hard disk but there are few issues with it. when it wakes back up it consumes lots power. Is there any other way to do it? Many times when I put my hard disk to sleep, I can see few bursts at the beginning and then after a while it goes to sleep. I think its because of the journaling system in ubuntu (which I use) Have anybody encountered that? What would be the best linux/unix operating system (eg: ubuntu/centos/redhat) to work on extensive hard disk operations? I would highly appreciate if you could share the problems you encountered while doing this operation.

    Read the article

  • Using a degrading corrupted hard disk with a brand new one. Is this ok?

    - by EApubs
    My old 500 GB hard drive started to give bad sectors. Its slowly going down. So, I bought a new 1TB Seagate drive. I first attached the 500GB drive as the first primary drive and installed Windows. I want Windows boot loader to be placed in the old drive so it won't conflict with the Linux system. But the actual Windows system (Including the C drive) is placed on my new hard drive. After this, I attached the new drive as the primary and installed Linux. Now if I want to re install windows, I can do it without any issues by simply setting the old drive as the primary. So the Linux system will be untouched. But is it a good idea to set things like this? Will the old degrading drive have an impact on the new one? The old drive is slower than the new one. Won't I be able to get the maximum speed out of the new drive even when its used to install everything (including the OS)? PS : When I ran the Windows Experience Index, I was using the old drive as the primary. Did it got the hard drive ratings from the old drive? What if I run it now with the new drive as the primary?

    Read the article

  • Video adapter problem on new motherboard

    - by Dmitriy Matveev
    Something bad happened to my PC several days ago. I wasn't near my PC, so I have no idea about what happened it was just halted. When I tried to boot it was entering infinite loops of a few seconds power up (cpu, hdds, etc) and then power down. I've tried to boot the system with no additional components (that includes hdd, video, network adapters and even memory) connected and that didn't solved the problem, so I've made a decision that most likely it's either some a problem with power unit or with motherboard. I've tried to replace my power unit by another one (which was expected to be working) and the problem didn't resolved again. I've bought a new MB (ASUS P5KPL-AM SE) and tried to get it running with my old CPU and memory (I hope it's still alive). Since this MB include on-board video I've tried to run the PC without installation of mine video. The PC wasn't running and the BIOS was beeping one long signal following by two short (Does it means a video problem?). After that I've installed my video adapter to PCI-E slot and tried to boot the system again and the BIOS was beeping the same. I don't get it. I may expect some problem with CPU and/or memory since I don't know what happened to my PC (maybe some power failure or something different), but not with video and not with on-board video on newly bought MB. How can I understand what's wrong with my system now?

    Read the article

  • how can i sell hp and ibm server cpu?

    - by elvayee
    i'm now working in a company exporting hp and ibm server cpu. Our price is very competitve, and our quality is very high, also, we have good after sale service. But the problem is: we don't have paid B2B. How can I find customers? if anyone knows, pls contact me by msn : melodyhua123 AT hotmail dot com or elvayee123 at gmail dot com thanks!

    Read the article

  • What could cause a dual-monitor PC to suddenly stop using one of the screens?

    - by raldi
    I've got a dual-monitor setup using a GeForce 7900GT that was working fine for over a year... then suddenly, only one of the screens works. It's not OS-related, because even on startup, only one screen displays the BIOS checks. In the past, both screens would show it together. I didn't change anything to trigger this The monitor that gets a signal is random -- sometimes the one on the left goes black, sometimes the one on the right. The monitors and their cables are good -- I can switch both or either, and I get a signal just fine. They're plugged in, too. It's not the video card, either -- I have an identical 7900GT in another machine, and swapping the two didn't fix anything. It's not dust on the motherboard -- I pulled everything out, cleaned it off, checked for obvious damage, put it all back together, and no change. My next two steps are going to be to reset the CMOS info and to try swapping out the motherboard. Before I do that, does anyone have any other ideas?

    Read the article

  • How does one dismantle the ThinkPad Mini Dock Series 3 (model 4337)?

    - by Whaa
    I have a ThinkPad Mini Dock Series 3 with a spring that is too stiff, causing problems with the connectivity when a computer is docked. I tried to open it so that I can soften the spring, but hit a brick wall. I removed all the screws I could find at the the bottom and the back panel of the docking station, but the bottom part of the plastic case would still not part from the top of the plastic case. I even looked under some of the various stickers for more screws, but found nothing. Can anyone please help with pointers on dismantling this docking station?

    Read the article

  • My PC suddenly reboots

    - by ChocoDeveloper
    Yesterday I opened my PC hub (after like, 5 years) to add more RAM and a new HDD. It was full of dust and balls of fluff, so I cleaned it a bit by blowing. I also removed the fan that was attached to the motherboard (I think it's there to cool the processor) and I cleaned it also by blowing and with a paintbrush, then put it back where it was (it had 4 weird plastic screws, it wasn't easy). Then I added 2 x 2Gib of RAM (Kingston 1333MHz), and the new HDD (Western Digital Caviar Blue 1TB SATA 3). I couldn't find another wire like the one my first disk had, which was thicker, but there was one that was more flat, so I plugged it and it worked fine (I also plugged the wire that I think is for the data, which looks like many little wires glued together). I'm running Ubuntu 12.04, and in the new disk I've just installed Windows 7. Between yesterday and today, two reboots ocurred while working on Ubuntu. I haven't used Windows 7 that much so I don't know if it will happen there too. So where can I begin to debug this?

    Read the article

  • Graphics card ATI Asus 9250 128 MB AGP problem.Monitor switching off.

    - by Dominick1978
    I have an old system with these specs: Motherboard: Via P4x266a (with AGP 4x) CPU: P4 1,7 Ghz Memory: 1152 MB DDR SDRAM Graphics card: Voodoo 3 2000 16 MB PSU: 300 Watt It also has 1 dvd-rom, 1 dvd-rw, 2 hard drives (all 4 connected via molex) , 1 sounblaster sound card and 1 ethernet card (both connected via pci). OS: XP Pro Recently I bought Asus 9250 128 MB AGP to replace voodoo.Wnen I switch on the pc the initial screens (until after the xp logo) sometimes are distorted with blurred colours.When XP are loaded there is some flickering but the rest are ok.XP can't recognize the card seeing it as just a VGA adapter.I have downloaded the latest xp drivers from ATI website and installed them.Then after the restart everything is ok (no distorted image or blurring) until after the xp logo.After this the monitor turns off while the pc is still running.I have tried many drivers but the problem persists (of course I removed the voodoo drivers before from the display adapter properties).Only once I have managed to enter XP (after changing BIOS features for graphics card from 256 MB to 128 MB) but the drivers on the control panel had an exclamation mark (ati 9250!) and below them ati 9250 secondary without ! under the display adapter tab and the ATI catalyst program said that it couldn;t find the card.That was the opnly time I went beyond the xp logo.Now the monitor auto switcheS off. So, what do you think? 1)Is this a broken card? 2)Is it the drivers of the card? 3)Is it PSU fault? 4)Anything else? Thanks for your help and excuse my english!

    Read the article

  • SDcard /dev/sdb2 is apparently in use by the system; will not make a filesystem here

    - by user171223
    I divided my sdcard into 2 partitions, but It got an error and couldn't create a new partition. Error: /dev/sdb2 is apparently in use by the system; will not make a filesystem here! My /dev/sdb was not mounted, and the output of command lsblk was: cxphong@cxphong:~/Desktop$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sr0 11:0 1 1024M 0 rom sda 8:0 0 465.8G 0 disk +-sda1 8:1 0 118.8G 0 part +-sda2 8:2 0 147.7G 0 part /media/DATA +-sda3 8:3 0 137.1G 0 part +-sda4 8:4 0 1K 0 part +-sda5 8:5 0 1023M 0 part [SWAP] +-sda6 8:6 0 61.2G 0 part / sdb 8:16 1 3.7G 0 disk +-sdb1 8:17 1 70.6M 0 part +-sdb2 8:18 1 3.6G 0 part +-sdb1 (dm-0) 252:0 0 70.6M 0 part +-sdb2 (dm-1) 252:1 0 3.6G 0 part I couldn't delete /dev/sdb1 (dm-0) & /dev/sdb2 (dm-1). What are they?

    Read the article

  • What's a worthwhile test for a new HD?

    - by Michael Kohne
    I work for a company that uses standard 2.5" SATA HD's in our product. We presently test them by running the Linux 'badblocks -w' command on them when we get them - but they are 160 gig drives, so that takes like 5 hours (we boot parted magic onto a PC to do the scan). We don't actually build that many systems at a time, so this doable, but seriously annoying. Is there any research or anecdotal evidence on what a good incoming test for a hard drive should be? I'm thinking that we should just wipe them with all zeros, write out our image, and do a full drive read back. That would end up being only about 1 hour 45 minutes total. Given that drives do block remapping on their own, would what I've proposed show up any infant mortality just as well as running badblocks?

    Read the article

  • What is the best SSD deal available right now ?

    - by paulgreg
    What is the best 2.5" SSD deal (best performance for a reasonable price and a good size) available right now ? The question is in 'community wiki' mode, so feel free to post the "winner" below : And the winner is... : currently the OCZ Vertex. Prices: * 30GB - $149.99 * 60GB - $239.99 * 120GB - $389.00 * 250GB - $829.00 Speed: * Read: up to 270MBps * Write: up to 210MBps

    Read the article

  • Hard Drive problem: is it the SATA controller or the HDD itself?

    - by Drooling_Sheep
    I have a Samsung 1.5TB hard drive hooked up to an ECS H55H-I mini-ITX motherboard. I have XBMC 10 (modified Ubuntu 10.04) installed for use as an HTPC. The hard drive encounters occasional errors during normal use which cause it to be remounted read-only. I have updated the BIOS on the motherboard, changed the SATA cable and moved it to different ports on the motherboard, installed and re-installed the OS (including different versions of XBMC and generic ubuntu), all to no avail. I recently ran tests both with badblocks -sv and smartctl -t long. Both reported no errors. This makes me think the motherboard or SATA controller is probably the issue. Does anyone know of any further tests I can do to help narrow this down? The processor is a Core i3. I forget the model number but it's one of the 32nm ones with on-package graphics. There's no discrete video card or optical drive. The power supply is a 150W Rosewill (pretty sure) that came with the case.

    Read the article

  • Setting Boot and Mirror Disks correctly at the Solaris OBP

    - by Shaun Dewberry
    I am recovering a domain that was lost due to power outage on an Sun Fire E25K server. I know how to set the appropriate parameters at the openboot prompt using nvalias/devalias, boot etc. However, I do not understand how one gets from the output of show-disks {1a0} ok show-disks a) /pci@1dd,600000/SUNW,qlc@1/fp@0,0/disk b) /pci@1dd,700000/SUNW,qlc@1/fp@0,0/disk c) /pci@1dc,700000/pci@1/pci@1/scsi@2,1/disk d) /pci@1dc,700000/pci@1/pci@1/scsi@2/disk e) /pci@1bd,600000/SUNW,qlc@1/fp@0,0/disk f) /pci@1bd,700000/SUNW,qlc@1/fp@0,0/disk g) /pci@1bc,700000/pci@1/pci@1/scsi@2,1/disk h) /pci@1bc,700000/pci@1/pci@1/scsi@2/disk q) NO SELECTION Enter Selection, q to quit: to the correct full disk path. I know it is basically one of the pci/scsi paths listed above, but in all instruction or examples a string of additional characters is appended to the path to specify Targets and Units but the explanation of the path construction is never given. Could someone please explain how to construct this disk path correctly?

    Read the article

  • strange problem with my motherboard

    - by user19950
    i have strange problem with my computer. i tried to turn it on, the computer was started ok, but i didnt see anything on screen. i tried to understand what cause the problem. its was'nt the HD or the screen. when i opened the computer, i saw that the fan connected to my motherboard didnt work. the funny thing is that i drove to a friend of mine, so he would fix me the computer, and when we tried to open the computer there it worked somehow and the fan worked also. when i came back home the computer again didnt work and the fan didnt work as well. does someone know what can cause the problem?

    Read the article

  • Asus V1S screen dimming randomly

    - by Bill
    I have an Asus V1V, which is the same as the Asus V1S except for the video card. I have a problem where the screen will randomly lose brightness or flicker between being lit and not lit. The picture below is of the left hinge, with the cover removed. Pressing one of these cables affects this behaviour, and pressing it in place will resolve the issue for a few hours. My guess means the inverter cable is damaged, based on previous experience. As the picture shows, there are two cables, an LCD cable and what I assume is an inverter cable. I purchased an LCD cable for my model of laptop, but have been unable to find an inverter cable. It seems not to exist. I would like some input on if an inverter cable actually exists, if it is likely the problem, or solutions in general to resolve this problem permanently.

    Read the article

  • Which type of motherboard i should by and why?

    - by metal gear solid
    If budged is not matter. I just need best performance with less power consumption. I can purchase any cabinet , power supply and Motherboard. Is Power supply has any relation with Form factor? Is the size of motherboard and number of Slots only difference between all form factors? Is there any difference related to performance of motherboard? Is bigger in Size (ATX) motherboard always better?

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >