Search Results

Search found 4161 results on 167 pages for 'desmond lost'.

Page 108/167 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• core.* files eating up server space (~50MB)

  - by skytreader

  I'm renting server space from someone and, upon logging in my control panel after quite sometime, noticed an abnormal spike (~50MB) in the disk usage. Upon investigating, I found a lot of core.* files scattered around my public_html directory. Each one is more than 5MB in size but no more than 6MB. The * part is all numbers (in programming regex, that should be core\.\d+). I downloaded one and checked the contents. There was a lot of balderdash characters (NUL mostly, but also a scattering of ETB, ETX, STX) but there's this block of readable text which says: This text is part of the internal format of your mail folder, and is not a real message. It is created automatically by the mail system software. If deleted, important folder data will be lost, and it will be re-created with the data reset to initial values. Pretty self-explanatory. A few blocks above the text are some more readable messages that look like logs but is sandwiched in between non printable characters. I've extracted some below. Scan not valid for mh mailboxes Bogus character 0x%x in news state Can't rewrite news state %.80s Error closing backup news state %.80s No state for newsgroup %.80s found Now, a few concerns: Am I under attack? The messages seem to be about my webmail but I don't use my personal webmail that much---only for a vanity email address and an inbox for an outdated comments system. However, lately, I seem to notice a spike in the spam for my vanity mail. (Note: the comments system is covered by a captcha but every now and then some get through. My vanity email has a spam filter but it isn't as good as I'd like). Next, if this is a feature, can I turn it off? Is it advisable to? I've only 150MB so you see why I'm fretting over a 50MB spike. Some final details: my only server-side scripts are in PHP. The directory which accumulated the most number of these core files is the one containing the Wordpress-managed subdomain of my site. I manage my server through CPanel. Lastly, I decided to delete this files and after some checking nothing seems amiss in my websites nor in my mail. They are indeed the ones responsible for the ~50MB spike as my disk space usage is back to expected.

  Read the article

• SMTP POP3 & PST. Acronyms from Hades.

  - by mikef

  A busy SysAdmin will occasionally have reason to curse SMTP. It is, certainly, one of the strangest events in the history of IT that such a deeply flawed system, designed originally purely for campus use, should have reached its current dominant position. The explanation was that it was the first open-standard email system, so SMTP/POP3 became the internet standard. We are, in consequence, dogged with a system with security weaknesses so extreme that messages are sent in plain text and you have no real assurance as to who the message came from anyway (SMTP-AUTH hasn't really caught on). Even without the security issues, the use of SMTP in an office environment provides a management nightmare to all commercial users responsible for complying with all regulations that control the conduct of business: such as tracking, retaining, and recording company documents. SMTP mail developed from various Unix-based systems designed for campus use that took the mail analogy so literally that mail messages were actually delivered to the users, using a 'store and forward' mechanism. This meant that, from the start, the end user had to store, manage and delete messages. This is a problem that has passed through all the releases of MS Outlook: It has to be able to manage mail locally in the dreaded PST file. As a stand-alone system, Outlook is flawed by its neglect of any means of automatic backup. Previous Outlook PST files actually blew up without warning when they reached the 2 Gig limit and became corrupted and inaccessible, leading to a thriving industry of 3rd party tools to clear up the mess. Microsoft Exchange is, of course, a server-based system. Emails are less likely to be lost in such a system if it is properly run. However, there is nothing to stop users from using local PSTs as well. There is the additional temptation to load emails into mobile devices, or USB keys for off-line working. The result is that the System Administrator is faced by a complex hybrid system where backups have to be taken from Servers, and PCs scattered around the network, where duplication of emails causes storage issues, and document retention policies become impossible to manage. If one adds to that the complexity of mobile phone email readers and mail synchronization, the problem is daunting. It is hardly surprising that the mood darkens when SysAdmins meet and discuss PST Hell. If you were promoted to the task of tormenting the souls of the damned in Hades, what aspects of the management of Outlook would you find most useful for your task? I'd love to hear from you. Cheers, Michael

  Read the article

• Adding JavaScript to your code dependent upon conditions

  - by DavidMadden

  You might be in an environment where you code is source controlled and where you might have build options to different environments.  I recently encountered this where the same code, built on different configurations, would have the website at a different URL.  If you are working with ASP.NET as I am you will have to do something a bit crazy but worth while.  If someone has a more efficient solution please share. Here is what I came up with to make sure the client side script was placed into the HEAD element for the Google Analytics script.  GA wants to be the last in the HEAD element so if you are doing others in the Page_Load then you should do theirs last. The settings object below is an instance of a class that holds information I collection.  You could read from different sources depending on where you stored your unique ID for Google Analytics. *** This has been formatted to fit this screen. *** if (!IsPostBack) { if (settings.GoogleAnalyticsID != null || settings.GoogleAnalyticsID != string.Empty) { string str = @"//<!CDATA[ var _gaq = _gaq || []; _gaq.push(['_setAccount', '"  + settings.GoogleAnalyticsID + "']); _gaq.push(['_trackPageview']);  (function () {  var ga = document.createElement('script');  ga.type = 'text/javascript';  ga.async = true;  ga.src = ('https:' == document.location.protocol  ? 'https://ssl' :  'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0];  s.parentNode.insertBefore(ga, s);})();"; System.Web.UI.HtmlControls.HtmlGenericControl si =  new System.Web.UI.HtmlControls.HtmlGenericControl(); si.TagName = "script"; si.Attributes.Add("type", @"text/javascript"); si.InnerHtml = sb.ToString(); this.Page.Header.Controls.Add(si); } } The code above will prevent the code from executing if it is a PostBack and then if the ID was not able to be read or something caused the settings to be lost by accident. If you have larger function to declare, you can use a StringBuilder to separate the lines. This is the most compact I wished to go and manage readability.

  Read the article

• 'Unable to mount Filesystem' Error

  - by Charles

  Trying to extract data from a 'bricked' Western Digital MyBook Live 2tb drive. I came across a forum that advised to use Ubuntu (booted from a CD) on my Macbook. Managed to download and create a boot CD for Ubuntu (like this little operating system btw). Booted the machine with the CD and plugged the drive (which I had extracted from it's casing and placed into a external USB SATA case & plugged to the laptop). The drive is seen by Ubuntu but each time I click on the drive, it gives me the following error: Unable to mount 2.0 TB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog -try dmesg | tail or so I am new to this and spent quite some time searching this site to see if I could find a solution to this problem without troubling anyone. I came up with a few that came close but some of the questioners mentioned that they had lost data...which scared me from going further. I need to basically extract 1 particular folder from the drive. If I can get to mount this volume 'sdb4', there is a folder called 'My_Work' which I need to back up. The rest I have/had a copy of. When I typed in dmesg | tail...I got several lines..but I think ones that are relevant are: [ 406.864677] EXT4-fs (sdb4): bad block size 65536 [ 429.098776] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only [ 439.786365] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only [ 445.982692] EXT4-fs (sdb4): bad block size 65536 [ 1565.841690] EXT4-fs (sdb4): bad block size 65536 I read somewhere to try/check 'sudo fdisk -l /dev/sdb4'. It gave me the following result: Disk /dev/sdb44: 1995.8 GB, 1995774623744 bytes 255 heads, 63 sectors/track, 242639 cylinders, total 3897997312 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdb4 doesn't contain a valid partition table This is where I reached and got frustrated and decided to try & get help on this without digging myself deeper into a hole! I understand that the answer may already be out there. If so, could someone please point me in the right direction. And if not, could someone please resolve (if possible) my situation!

  Read the article

• How do you turn on the customizable gnome-panel features (like gnome-applets) in Precise?

  - by chriv

  I resurrected a broken laptop today. I took out the HDD, put it in a USB 3.0 enclosure, and created a VM that would use it. It was running lucid. I took a screenshot of the desktop before I started "do-release-upgrade", because from experience, I will never have my GUI back the way I want it again. I know how to install gnome-panel to get back the "Gnome Classic" session option. I know how to put my minimize, maximize, and close buttons back in the upper-right hand corner of windows (where they belong). I know how to use gdm instead of lightdm. Unity gets worse in every version (and the other desktop OS is going to be even worse with Metro). Here's what I don't know (in order of importance): 1. How do you make the panels in gnome (gnome-panel, to be precise) customizable again (like they were in older versions of Ubuntu)? 2. How do you install applets in the panels now (right-click is now ignored)? 3. How can you customize all of the window elements (like you could in older versions of Ubuntu)? I can't remember much about maverick, natty, or oneiric (except their names), so I don't know exactly when I lost these capabilities. Edit: (no screenshot), my StackExchange reputation (on other StackExchange sites) doesn't carry over to this site, so I can't post the screenshot. Take a look at the panels in the screen hot. They are nice, compact, and VERY functional (disk mounter applet, frequently used shortcuts, workspaces, show desktop, kill window, and trash icons, etc.) Notice how small the fonts (and how little real estate they waste). You can't notice the compact title bars, fonts, and window icons in this screen shot (since I redacted the rest of the desktop), but it's the same story there. Please help. I don't want to learn another distro, but Ubuntu gets less customizable with every "upgrade." Screenshot (not an inline image, since I don't have the reputation yet)... i.stack.imgur.com/puoUT.png

  Read the article

• Object Oriented Design of a Small Java Game

  - by user2733436

  This is the problem i am dealing with. I have to make a simple game of NIM. I am learning java using a book so far i have only coded programs that deal with 2 classes. This program would have about 4 classes i guess including the main class. My problem is i am having a difficult time designing classes how they will interact with each other. I really want to think and use a object oriented approach. So the first thing i did was design the Pile CLASS as it seemed the easiest and made the most sense to me in terms of what methods go in it. Here is what i have got down for the Pile Class so far. package Nim; import java.util.Random; public class Pile { private int initialSize; public Pile(){ } Random rand = new Random(); public void setPile(){ initialSize = (rand.nextInt(100-10)+10); } public void reducePile(int x){ initialSize = initialSize - x; } public int getPile(){ return initialSize; } public boolean hasStick(){ if(initialSize>0){ return true; } else { return false; } } } Now i need help in designing the Player Class. By that i mean i am not asking for anyone to write code for me as that defeats the purpose of learning i was just wondering how would i design the player class and what would go on it. My guess is that the player class would contain method for choosing move for computer and also receiving the move human user makes. Lastly i am guessing in the Game class i am guessing the turns would be handeled. I am really lost right now so i was wondering if someone can help me think through this problem it would be great. Starting with the player class would be appreciated. I know there are some solutions for this problem online but i refuse to look at because i want to develop my own approach to such problems and i am confident if i can get through this problem i can solve other problems. I apologize if this question is a bit poor but in specific i need help in designing the Player class.

  Read the article

• Rolling With the Punches

  - by D'Arcy Lussier

  So I’ve been tweeting the last little while “Rolling with the punches” and I’ve had some people ask me what that meant. Whether you’re running a conference (like I am this week), or a project, or a birthday party for a 2 year old, you need to be ready to handle those things that are unexpected. Risk mitigation can only go so far and its at those times that you need to become resourceful. So let me tell you what the last few days have been like. Today is the first day of Prairie Dev Con Winnipeg, a conference that I run. On Friday I was informed that my keynote speaker had lost his voice, one of my speakers had a family emergency and had to back out, and I got a warning from another that he was travelling over the weekend and if there was a storm or something he may not be able to get back by Monday for his talk. A storm didn’t happen, but their car did break down and he was delayed. Finally, Saturday night I took my printing order to Staples. It was at 5 and they closed at 6, and I had a bunch of surveys to be printed and cut. The girl working said that she’d have it ready by the next day (Sunday). Her intent was to come in the next morning and finish the job. Unfortunately, she had to be hospitalized that night and never made it into work…and never informed anyone of the remaining work. They found out at 3pm when I came to pick it up and there was no way they’d be able to cut everything in time. So how did we roll with these punches? - Miguel, my keynote speaker, was a trooper and was able to do the keynote but asked that his session get moved from Monday to Tuesday. This is why I wait until the last day before printing out schedules, they can change up to the event and even later. - I was able to move some sessions around to accommodate my stranded speaker and fill the empty slot from the speaker that couldn’t make it. - Staples was able to get me half the cut surveys so I took those and my wife will pick up the rest today. I altered how we’d collect session surveys, and actually I think it’ll work better. So all of this is to say, plan but also plan for what you can’t plan for – there will be things that happen that blindside you, that you’re not sure how to handle or solve. Stop, take a deep breath, and don’t feel that you need to limit yourself to the boundaries that you initially set for yourself. Roll with the punch and learn from it so that you can avoid the blow next time. Now, back to the conference! D

  Read the article

• A better way to organize your Silverlight Code Snippets.

  - by mbcrump

  I hate re-writing code. I also hate it when I find a great code snippet on the web and forget to bookmark it or it gets lost in my endless sea of bookmarks. So what do you do to get around this? This is the question that I was asking myself at the end of 2010. How can I get my Silverlight code organized? My requirements for a snippet manager were: Needs to be FREE. An easy way to view XAML/C# code behind together in one “view”. I wanted the ability to store the code snippets in cloud in case my HDD dies. Searchable Keywords to quickly find code snippets. I started looking for a snippet manager that would allow me to do just that and finally found Snippet Manager. Before going any further, I think that one of the most important things to note here is that this software supports 37 languages. It’s not just for Silverlight developers nor C# only guys. The software supports Java, SQL and even COBOL.   Below is a screenshot of the Snippet Manager that shows my Silverlight code snippet. You will notice that I have highlighted two sections. The top part is my XAML and the bottom is my C# code behind. I’ve included a sample below of my code snippets so that you can get an idea of how I organized it. Another thing that’s great about this software is that it supports plain text. I added some connection strings in the TEXT section below.  Once you have finished adding your code snippets, you can store them in the cloud. I created a FTP directory called “snippets” on my FTP Server and hit the upload button once I am finished adding my new codes snippets. This will allow me to use the code snippets on another computer with this application on my USB Key. See screenshots below: Enter your FTP credentials below: Hit the Uploads button on the Toolbar: Login in to your FTP Server and verify the following files are now on the FTP Server: Another great feature of the Snippet Manager is that you can also integrate this into VS2010 by clicking Tools –> External Tools: And setting up your External Screen to point to the Executable: You can now launch it by going to Tools –> Snippet Manager. If you want you could also a shortcut to launch the program with HotKeys. As you can see, this is a nice little program that includes everything needed to organize your code snippets very clean. I didn’t go over every feature but this is something that you might want to download and give it a shot.  Subscribe to my feed CodeProject

  Read the article

• dual boot ubuntu installation mishap

  - by user590849

  I have Windows 7 pc ,where i had 2 partitions, a c drive for my system files and a d drive for my data. I decided to install ubuntu 11.10 a couple of days ago and thought of install it in a separate partition of its own. So i made a separate Linux partition of 30GB. I downloaded ubuntu on my usb stick and installed. During the installation process i was asked where to install ubuntu so i opened up a screen that was similar to this one There were six partitions present ( I had made only 3 partition via windows). Their names were totally different from the ones that i had given in windows. So i selected a drive which had the same size as my Linux partition that i had made in windows ( no other partition had the same size). I clicked on install now and got an error message saying that "There was no root folder set". I set the newly made partition as my root folder and clicked install now. Now out of the 6 partitions that were created 3 were logical ( i had only created 3 partitions in windows). As soon as i clicked install now, the system asked me where i wanted to put my "swap space". I selected one of the logical drives and hit install. Ubuntu successfully installed on my system and at the end it asked me to reboot. I did and got the following error message: "missing operating system". I was shocked. I tried my windows recovery disk ( that i had gotten when i had purchased my laptop) and there i went into startup repair. In the startup repair option i was not able to locate windows. The system asked me to click the "Load drivers" button to load the drivers to my harddrive where windows was installed, but i could not locate any drivers to my harddrive. I tried this several times but to no success. I panicked and installed ubuntu, now this time click "ok" at every step( not worrying about the partition and all). The os installed correctly and i am now able to access my harddrive. NO data within the c drive is lost. All the windows system files are intact. I wish to recover my windows installation. How do i go about it? Thank you in advance. I do not want to format my computer and install windows again.

  Read the article

• New laptop, Windows 8.1, attempting dual install. Ubuntu installer doesn't 'see' existing OS

  - by Flaminica

  Though I've used Ubuntu for a few years, I'm new to installation. Previously I had help and now I'm doing it alone (moved across the world). Windows 8.1 came preinstalled on my new laptop (Toshiba Satellite C70-A-17C - Core i5, 8 GB RAM, 750 GB HDD). I have already followed a few steps I found online to prepare for a dual install (with Ubuntu 14.04). I backed up Windows, created a bootable Ubuntu USB and DVD (just in case one didn't work), turned off fast boot and secure boot, and shrunk C:/. The new unallocated drive portion is 292.97 GB. After shrinking C:/, I restarted Windows a couple of times to make sure everything was working fine (it is). I then attempted to install with the Ubuntu live USB. However, the Ubuntu installer doesn't see that Windows 8.1 is already installed. I don't understand, and don't want to mess with Ubuntu partitioning when I don't know where the partitions will be created. My concern is that, if I go further with the installation process, Windows might be overwritten or compromised in some way. I then tried to reboot using the Ubuntu live DVD, thinking I might get a different result. However, I can't figure out how to make the laptop boot from the CD drive. I went into the BIOS and found no option there, either. Any help is very appreciated! EDIT: Looks like I can't link directly to each photo. Here is my album of screenshots: http://imgur.com/a/zChCo Here you can see that there's no option to boot from CD drive, only USB. Everything looks okay so far. I don't understand this. Ubuntu has not yet been installed. Unmounting partitions? (I chose 'no'.) Even though the laptop came pre-installed with Windows 8.1, the Ubuntu USB installer can't see it. I chose 'something else'. I need to pick and format partitions. I scrolled down and took a second shot to include all information. Completely lost and cancelled installation.

  Read the article

• Is the Observer pattern adequate for this kind of scenario?

  - by Omega

  I'm creating a simple game development framework with Ruby. There is a node system. A node is a game entity, and it has position. It can have children nodes (and one parent node). Children are always drawn relatively to their parent. Nodes have a @position field. Anyone can modify it. When such position is modified, the node must update its children accordingly to properly draw them relatively to it. @position contains a Point instance (a class with x and y properties, plus some other useful methods). I need to know when a node's @position's state changes, so I can tell the node to update its children. This is easy if the programmer does something like this: @node.position = Point.new(300,300) Because it is equivalent to calling this: # Code in the Node class def position=(newValue) @position = newValue update_my_children # <--- I know that the position changed end But, I'm lost when this happens: @node.position.x = 300 The only one that knows that the position changed is the Point instance stored in the @position property of the node. But I need the node to be notified! It was at this point that I considered the Observer pattern. Basically, Point is now observable. When a node's position property is given a new Point instance (through the assignment operator), it will stop observing the previous Point it had (if any), and start observing the new one. When a Point instance gets a state change, all observers (the node owning it) will be notified, so now my node can update its children when the position changes. A problem is when this happens: @someNode.position = @anotherNode.position This means that two nodes are observing the same point. If I change one of the node's position, the other would change as well. To fix this, when a position is assigned, I plan to create a new Point instance, copy the passed argument's x and y, and store my newly created point instead of storing the passed one. Another problem I fear is this: somePoint = @node.position somePoint.x = 500 This would, technically, modify @node's position. I'm not sure if anyone would be expecting that behavior. I'm under the impression that people see Point as some kind of primitive rather than an actual object. Is this approach even reasonable? Reasons I'm feeling skeptical: I've heard that the Observer pattern should be used with, well, many observers. Technically, in this scenario there is only one observer at a time. When assigning a node's position as another's (@someNode.position = @anotherNode.position), where I create a whole new instance rather than storing the passed point, it feels hackish, or even inefficient.

  Read the article

• iOS app with a lot of text

  - by rdurand

  I just asked a question on StackOverflow, but I'm thinking that a part of it belongs here, as questions about design pattern are welcomed by the faq. Here is my situation. I have developed almost completely a native iOS app. The last section I need to implement is all the rules of a sport, so that's a lot of text. It has one main level of sections, divided in subsections, containing a lot of structured text (paragraphs, a few pictures, bulleted/numbered lists, tables). I have absolutely no problem with coding, I'm just looking for advice to improve and make the best design pattern possible for my app. My first shot (the last one so far) was a UITableViewController containing the sections, sending the user to another UITableViewController with the subsections of the selected section, and then one strange last UITableViewController where the cells contain UITextViews, sections header help structure the content, etc. What I would like is your advice on how to improve the structure of this section. I'm perfectly ready to destroy/rebuild the whole thing, I'm really lost in my design here.. As I said on SO, I've began to implement a UIWebView in a UIViewController, showing a html page with JQuery Mobile to display the content, and it's fine. My question is more about the 2 views taking the user to that content. I used UITableViewControllers because that's what seemed the most appropriate for a structured hierarchy like this one. But that doesn't seem like the best solution in term of user experience.. What structure / "view-flow" / kind of presentation would you try to implement in my situation? As always, any help would be greatly appreciated! Just so you can understand better the hierarchy, with a simple example : -----> Section 1 -----> SubSection 1.1 -----> Content | -----> SubSection 1.2 -----> Content | -----> SubSection 1.3 -----> Content | | | UINavigationController -------> Section 2 -----> SubSection 2.1 -----> Content | -----> SubSection 2.2 -----> Content | -----> SubSection 2.3 -----> Content | -----> SubSection 2.4 -----> Content | -----> SubSection 2.5 -----> Content | -----> Section 3 -----> SubSection 3.1 -----> Content -----> SubSection 3.2 -----> Content |------------------| |--------------------| |-------------| 1 UITableViewController 3 UITableViewControllers 10 UIViewControllers (3 rows) (with different with a UIWebView number of rows)

  Read the article

• 12.04 Booting into Terminal

  - by user170796

  To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

  Read the article

• Developing a cloud based app

  - by user134897

  I am a company owner that has developed a cloud based app. My code writer has told me how good he is more than once, well, better stated, he did a good job telling me he was better than everyone else in my rather small community. In the last 18 months I have spent nearly 160,000.00 dollars trying to get this company to the "making money" stage. I am now nearly broke, sitting on the edge of a brilliant marketing plan to launch a much needed cloud based app. We did launch our app last year (late 2013), and the feedback was amazing from the users. One user that signed up to use the free app stated that we needed to call him the moment our company goes public because he wants to be the first to buy stock. Now, here's my problem. We did not originally set out to develop a freemium app, we just sort of ended up there by the natural progression of the app. So, now I have an app that really needs to be scrapped and re-built. Although I do feel my code writer has displayed some brilliance in what he has done, he was extremely weak on graphics and every time we speak he tells me there is a newer better way to code that he is trying to learn. So, here's the million dollar question. Ho do I find code writers that already know the newest, best ways to write code? Or maybe better asked, what is the newest best code writing technique? Second, is it even possible to find code writers that are good at graphics? In short, I am nearly broke and need to start over, but I do not know where to find people qualified to write it good the first time around and display good graphic skills. I am trying to build a team of writers instead of just one person. Maybe 3 good at code and two good at graphics, but I am clueless as to what criteria I should use to determine if I am building the right team members. Please help, I am sure you can tell I am fairly lost by my continued rambling.

  Read the article

• "shutting down hyper-v virtual machine management service"

  - by icelava

  I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE As per answer report, it eventually restarted itself.

  Read the article

• Ubuntu boot hangs after message "Running /scripts/init-bottom ... done"

  - by Douglas B. Staple

  I've been trying to copy a Proxmox container based on the Ubuntu Precise Standard template to a VirtualBox VM. I am now stuck at a point where my new Ubuntu/VirtualBox VM hangs after the message "Running /scripts/init-bottom ... done" during boot. I started by installing Ubuntu Server 12.04.4 LTS on a VirtualBox VM. Ubuntu Server 12.04.4 LTS was the closest "official" Ubuntu ISO to the Proxmox container OS I could find. I installed all updates on both the Proxmox container and on the VirtualBox VM. The idea was to get same version kernal running on the ProxMox container and VirtualBox VM. sudo apt-get update ; sudo apt-get upgrade ; sudo apt-get dist-upgrade sudo reboot rsync the entire proxmox container to a temporary directory in the VirtualBox VM: cd / mkdir /tmp/backup rsync -e ssh -av --exclude={/dev,/proc,/sys,/tmp,/run,/mnt,/media,/lost+found,/boot,/selinux} root@my_proxmox_container_hostname:/ /tmp/backup Shut down the virtual machine, and boot the VM with a bootable linux image. I used the Desktop image of Ubuntu 12.04 LTS, ubuntu-12.04.4-desktop-i386.iso Drop to a root prompt. Mount the VM root filesystem: sudo mount /dev/sda1 /mnt Remove files from most of /mnt cd /mnt sudo rm -rf bin etc home lib opt sbin root usr var Move all of the files from /mnt/backup into /mnt sudo mv /mnt/tmp/backup/* /mnt Rebooted system. For me, at this point the system freezes after starting, after the message: Running /scripts/init-bottom ... done I've tried reinstalling GRUB and all manner of other thing. I am almost ready to give up.

  Read the article

• Teamcity build agent gives 504 gateway timeout

  - by Anthony

  I have a new teamcity build agent machine, which when started up tries to connect to the build server and fails. It never shows up in the connected, disconnected or unauthorised agents tabs of the build server web interface. The logs on the build agent show that it fails to connect with a 504 gateway timeout. This is from teamcity-agent.log [2012-09-04 15:34:59,776] INFO - buildServer.AGENT.registration - Registering on server http://10.0.10.16, AgentDetails{Name='my-local', AgentId=null, BuildId=null, AgentOwnAddress='10.0.1.14', AlternativeAddresses=[10.0.10.32], Port=8080, Version='21424', PluginsVersion='21424-md5-somechecksum', AvailableRunners=[ABunchOfPlugins], AvailableVcs=[SomeRunners], AuthorizationToken='sometoken'} [2012-09-04 15:35:53,606] WARN - buildServer.AGENT.registration - Call http://10.0.10.16/RPC2 buildServer.registerAgent3: org.apache.xmlrpc.XmlRpcClientException: Server returned incorrect status code: 504 Gateway Time-out [2012-09-04 15:35:53,606] WARN - buildServer.AGENT.registration - Connection to TeamCity server is probably lost. Will be trying to restore it. Take a look at logs/teamcity-agent.log for details (unless you're using custom logging). (I have edited some identifying data out of this log excerpt) But I can reach the build server. In fact, tracert shows that it is very nearby. Tracing route to TEAMCITYSERVER [10.0.10.16] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 10.0.2.1 2 <1 ms <1 ms <1 ms TEAMCITYSERVER [10.0.10.16] Trace complete. I can see a teamcity login page if I hit http://10.0.10.16 in the browser. The teamcity service is logging in as the same (local administrator) account as I used to log in and test the network. The build agent is a windows 2008 server VM hosted on Ubuntu 12.04 under Oracle VirtualBox. I have disabled firewalls on both the Windows and Ubuntu machines. Other VMS with similar configuration can connect fine and do not report this error. What can possibly be preventing this connection?

  Read the article

• Mapping Drive Error - System Error 1808

  - by Julian Easterling

  A vendor is attempting to map and preserve a network drive using nt authority/system; so it stays persistent when the interactive session of the server is lost. They were able to do this on one server (Windows 2008 R2) but not a second computer (also Windows 2008 R2). D:\PsExec.exe -s cmd.exe PsExec v1.98 - Execute processes remotely Copyright (C) 2001-2010 Mark Russinovich Sysinternals - www.sysinternals.com Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. all rights reserved. C:\Windows\system32>whoami nt authority\system C:\Windows\system32>net use New connections will be remembered. Status Local Remote Network -------------------------------------------------------------------- OK X: \\netapp1\share1 Microsoft Windows Network The command completed successfully. C:\Windows\system32>net use q: \\netapp1\share1 System error 1808 has occurred. The account used is a computer account. Use your global user account or local user account to access this server. C:\Windows\system32> I am unsure on how to set up a "machine account mapping" which will preserve the drive letter of the Netapp path being mapped, so that the service account running a Windows service can continue to access the share after interactive logon has expired on the server. Since they were able to do this on one server but not another, I'm not sure how to troubleshoot the problem? Any suggestions?

  Read the article

• Intermittent Windows Server 2008 BSOD and restart

  - by Timka

  Our EC2 Instance (Windows Server 2008) crashed multiple times for the past 3 months (last time was today at 1:05 EST). Upon reviewing MEMORY.DMP file we noticed that possible cause of the crashes is rhelnet.sys (RedHat PV NIC Driver). Server's Event Viewer has the following records right after the crash: Critical - Kernel Power: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. BugCheck: The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x000000000000002d, 0x0000000000000002, 0x0000000000000000, 0xfffff88001402d14). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 100113-35849-01. Could this be a hardware issue? Would it help if we stop and start the instance? Or is this more likely that this is caused by the software running on the system? [Update 10.01.2013] Amazon Rep suggested to update RH drivers to Citrix PV drivers on our instance: Upgrading PV Drivers [Update 10.08.2013] We performed a drivers upgrade on the cloned instance. Right after the upgrade we noticed the following errors in our Event viewer: Xennet6 errors in Event Viewer (Event ID# 5001) After digging a bit more I found this article suggesting to install the latest Citrix drivers. Unfortunately, this didn't help us at all and our cloned instance became unresponsive. [Update 10.08.2013 2] I recreated an instance and updated PV drivers again. After searching on Internet I found this article where Amazon Rep explains that: "Event ID 5001 from source Xennet6 cannot be found" message does not indicate anything wrong, just that the PV driver is looking for a feature that we have not implemented in our version of Xen. I will keep my test system running for a while to see if there any issues with it.

  Read the article

• Commvault Oracle RMAN Restore to new host

  - by Glenn Stauffer

  We use Commvault Simpana 8 and I have a situation where I have backups of an Oracle database on tape that were taken from Host A. Host A suffered a disk failure (lost its raid configuration) and the sys admins are trying to restore it; in the meantime, I'd working to bring the database back up on another host - Host B. I'm running into problems and am trying to sort out the parameters that need to be passed to the Commvault media agent to get this to work. Unfortunately, I do not have access to Commvault support and the backup person is unavailable. Any one have a clue? The backups are there and the media agent reported a successful write when they ran last night. This is what fails: RMAN run { allocate channel t1 device type sbt_tape parms='SBT_LIBRARY=/usr/local/galaxy/Base/libobk.so,BLKSIZE=262144, ENV=(CvClientName=dbsrv2,CvInstanceName=Instance001, CVOraRacDBName=BBDB, CVOraRACDBClientName=BBDB)'; restore spfile to pfile '/tmp/bbdb.ora' from autobackup; }2 3 4 allocated channel: t1 channel t1: sid=34 devtype=SBT_TAPE channel t1: CommVault Systems for Oracle: Version 7.0.0(Build76) Starting restore at 09-MAY-10 channel t1: looking for autobackup on day: 20100509 channel t1: autobackup found: c-3941155360-20100509-01 released channel: t1 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of restore command at 05/09/2010 18:01:35 ORA-19870: error reading backup piece c-3941155360-20100509-01 ORA-19507: failed to retrieve sequential file, handle="c-3941155360-20100509-01", parms="" ORA-27029: skgfrtrv: sbtrestore returned error ORA-19511: Error received from media manager layer, error text: sbtrestore: Job[0] thread[26316]: InitializeCLRestore() failed.

  Read the article

• Apache reverse-proxy intermittent error 113 - No route to host

  - by BonkaBonka

  I've got an Apache 2.0.52 server on CentOS 4 that front-ends a couple of App servers (mix of Jetty and Tomcat). Apache has a handful of virtual hosts configured like this: <VirtualHost www1.example.com:443> ServerName www1.example.com DocumentRoot "/mnt/app_web/html" SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt SSLCertificateChainFile /etc/httpd/conf/ssl.crt/chain.crt SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 RewriteEngine on RewriteRule ^/app1/(.*)$ http://app1.example.com:8080/app1/$1 [P,L] RewriteRule ^/app2/(.*)$ http://app2.example.com:8080/app2/$1 [P,L] </VirtualHost> However, I'm getting the following errors in the logs intermittently: [Fri Dec 04 07:19:41 2009] [error] (113)No route to host: proxy: HTTP: attempt to connect to 10.0.0.1:8080 (app1.example.com) failed I initially tried turning off IPv6, and that seemed to largely cure it, but I still have sporadic bursts of these messages. Additionally, we're running memcache on same front-end and during the times when I'm getting those messages in Apache's log, the following command doesn't work: echo stats | nc 127.0.0.1 11211 No messages are printed, but neither are the stats printed. I am completely lost as to how to proceed with troubleshooting this. =(

  Read the article

• Timeline chart in Excel

  - by Axarydax

  Hi, I'd like to see a timeline of events from a database in a "timeline chart", that should look like this: http://i46.tinypic.com/sw3dj5.png - I've made me a small c# program that paints this onto a Bitmap, but that isn't the way to go. I have input data that has 3 fields: StartX EndX Y 2596 15008 1 5438 6783 2 5450 5453 4 5456 5459 4 5462 5466 4 5470 5474 4 5477 5657 5 5662 5665 4 5668 5671 4 As the picture shows, for each line I'd like to have a line from StartX to EndX with a Y value of Y. Stacked bar chart almost solves my problem, but I don't want to have a new line on the chart for every row, I have thousands of rows and I'd like to have X axis as the time axis, and view which events (Y is the type of the event) happened simultaneously. The image ( http://i46.tinypic.com/sw3dj5.png) I've generated with a simple C# program shows that the event SYSTEM was active all the time, and the events TECH and BREAK were almost exclusive, but had some overlaps. I'd like to at least know the correct direction which I should take; I'm lost in the multitude of Excel chart types. Thanks.

  Read the article

• PDF Converter wanted: Convert 8.5*11 PDF images into 600*800px PDF images for the Nook

  - by Astro

  I have PDF files that are maritime charts, For example this one from the Delaware Bay http://ocsdata.ncd.noaa.gov/BookletChart/12304_BookletChart_HomeEd.pdf There is a lot of detailed information in the image. When I show them on a monitor the details are shown. When I put them on the Nook they are sized to fit the Nook screen (about 3*5) and all the details are lost. Since the Nook pdf reader does not have a zoom feature, the charts are unreadable. I'd like to convert them to fit on the Nook screen(600*800px). This means the images would need to be sliced into multiple images. (ie a single image (page) would get split into 5 rows and 4 columns) In a perfect world they would get converted with a slight overlap, left to right, top to bottom. I could then page through the smaller slices to find the section I need. I had used PaperCrop in the past to convert two col PDF's (highly recommended) but it can't do anything with the images. ImageMagick does a lot with combining images, but I didn't see any split options to split the image into tiles. Windows program preferred. Thanks!

  Read the article

• InnoDB: Error: log file ./ib_logfile0 is of different size

  - by jack

  I just added the following lines in /etc/mysql/my.cnf after I converted one database to use InnoDB engine. innodb_buffer_pool_size = 2560M innodb_log_file_size = 256M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 16 innodb_flush_method = O_DIRECT But it raise "ERROR 2013 (HY000) at line 2: Lost connection to MySQL server during query" error restarting mysqld. And mysql error log shows the following InnoDB: Error: log file ./ib_logfile0 is of different size 0 5242880 bytes InnoDB: than specified in the .cnf file 0 268435456 bytes! 100118 20:52:52 [ERROR] Plugin 'InnoDB' init function returned error. 100118 20:52:52 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 100118 20:52:52 [ERROR] Unknown/unsupported table type: InnoDB 100118 20:52:52 [ERROR] Aborting So I commented out this line # innodb_log_file_size = 256M And it restarted mysql successfully. I wonder what's the "5242880 bytes of log file" showed in mysql error? It's the first database on InnoDB engine on this server so when and where is that log file created? In this case, how can I enable innodb_log_file_size directive in my.cnf? EDIT I tried to delete /var/lib/mysql/ib_logfile0 and restart mysqld but it still failed. It now shows the following in error log. 100118 21:27:11 InnoDB: Log file ./ib_logfile0 did not exist: new to be created InnoDB: Setting log file ./ib_logfile0 size to 256 MB InnoDB: Database physically writes the file full: wait... InnoDB: Progress in MB: 100 200 InnoDB: Error: log file ./ib_logfile1 is of different size 0 5242880 bytes InnoDB: than specified in the .cnf file 0 268435456 bytes! Resolution It works now after deleted both ib_logfile0 and ib_logfile1 in /var/lib/mysql

  Read the article

• Restarting Haproxy Gracefully

  - by Anand Gupta

  As per various blogs, HAproxy can be gracefully restarted using the following command: sudo haproxy -f /etc/haproxy/haproxy.cfg -p /var/run/haproxy.pid -sf $(cat /var/run/haproxy.pid) TO verify this, I had set up a apache bench script which contiguously sent message to haproxy. Ideally, whenever I restarted my server the script should not have an affect on the apache bunch execiton. But, it seems that whenever Haproxy is restarted apache bench scripts terminate and the connection to load balancer is lost. Here is the details of my HaProxy configuration file : global nbproc 4 log 127.0.0.1 local0 log 127.0.0.1 local1 notice #log loghost local0 info maxconn 4096 #chroot /usr/share/haproxy user haproxy group haproxy daemon pidfile /var/run/haproxy.pid stats socket /home/ubuntu/haproxy.sock #debug #quiet defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen webstats bind 0.0.0.0:1000 stats enable mode http stats uri /lb?stats stats auth anand:aaaaaaaa #stats refresh listen web-farm 0.0.0.0:80 mode http balance roundrobin option httpchk HEAD /index.php HTTP/1.0 server server2.com 1.1.1.1:80 server serve1.com 1.1.1.2:80 ~ Please let me know what am I missing here.

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >